From mboxrd@z Thu Jan 1 00:00:00 1970 From: Frank Schaefer Subject: GeForce 6150SE: DVI-connector not detected Date: Sat, 27 Feb 2010 12:05:30 +0100 Message-ID: <4B88FC7A.6010403@googlemail.com> Mime-Version: 1.0 Content-Type: multipart/mixed; boundary="------------070909030201010104010100" Return-path: List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , Sender: nouveau-bounces-PD4FTy7X32lNgt0PjOBp9y5qC8QIuHrW@public.gmane.org Errors-To: nouveau-bounces-PD4FTy7X32lNgt0PjOBp9y5qC8QIuHrW@public.gmane.org To: nouveau-PD4FTy7X32lNgt0PjOBp9y5qC8QIuHrW@public.gmane.org List-Id: nouveau.vger.kernel.org This is a multi-part message in MIME format. --------------070909030201010104010100 Content-Type: text/plain; charset=ISO-8859-15 Content-Transfer-Encoding: 7bit Hi, today I tested kernel 2.6.33 and it seems that nouveau doesn't detect the DVI-connector of my GeForce 6150SE (Asus M2N-VM DH). The screen turns black during boot-process immediately after the "[drm] nouveau ..." messages appeared. The board has two connectors (DVI + VGA) and I'm using the DVI-connector only. Everything is fine when I use a VGA-cable instead. See boot.msg in the attachment. Please tell me if you need further informations. I can also test patches. Regards, Frank Schaefer --------------070909030201010104010100 Content-Type: text/plain; name="boot.msg" Content-Transfer-Encoding: 7bit Content-Disposition: inline; filename="boot.msg" Inspecting /boot/System.map-2.6.33-0.1-pae Cannot find map file. No module symbols loaded - kernel modules not enabled. Cannot build symbol table - disabling symbol lookups klogd 1.4.1, log source = ksyslog started. <6>Initializing cgroup subsys cpuset <6>Initializing cgroup subsys cpu <5>Linux version 2.6.33-0.1-pae (root@Athlon64X2-5000) (gcc version 4.3.2 [gcc-4_3-branch revision 141291] (SUSE Linux) ) #2 SMP Thu Feb 25 16:29:19 CET 2010 <6>BIOS-provided physical RAM map: <6> BIOS-e820: 0000000000000000 - 000000000009f000 (usable) <6> BIOS-e820: 000000000009f000 - 00000000000a0000 (reserved) <6> BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved) <6> BIOS-e820: 0000000000100000 - 00000000afee0000 (usable) <6> BIOS-e820: 00000000afee0000 - 00000000afee3000 (ACPI NVS) <6> BIOS-e820: 00000000afee3000 - 00000000afef0000 (ACPI data) <6> BIOS-e820: 00000000afef0000 - 00000000aff00000 (reserved) <6> BIOS-e820: 00000000b0000000 - 00000000c0000000 (reserved) <6> BIOS-e820: 00000000f0000000 - 00000000f4000000 (reserved) <6> BIOS-e820: 00000000fec00000 - 0000000100000000 (reserved) <6> BIOS-e820: 0000000100000000 - 00000001a0000000 (usable) <6>NX (Execute Disable) protection: active <6>DMI 2.4 present. <5>Phoenix BIOS detected: BIOS may corrupt low RAM, working around it. <7>e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved) <6>last_pfn = 0x1a0000 max_arch_pfn = 0x1000000 <7>MTRR default type: uncachable <7>MTRR fixed ranges enabled: <7> 00000-9FFFF write-back <7> A0000-BFFFF uncachable <7> C0000-C7FFF write-protect <7> C8000-FFFFF uncachable <7>MTRR variable ranges enabled: <7> 0 base 0000000000 mask FF80000000 write-back <7> 1 base 0080000000 mask FFC0000000 write-back <7> 2 base 0100000000 mask FF80000000 write-back <7> 3 base 0180000000 mask FFE0000000 write-back <7> 4 disabled <7> 5 disabled <7> 6 disabled <7> 7 disabled <7>TOM2: 00000001a0000000 aka 6656M <6>x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106 <7>e820 update range: 00000000c0000000 - 0000000100000000 (usable) ==> (reserved) <6>Scanning 0 areas for low memory corruption <6>modified physical RAM map: <6> modified: 0000000000000000 - 0000000000010000 (reserved) <6> modified: 0000000000010000 - 000000000009f000 (usable) <6> modified: 000000000009f000 - 00000000000a0000 (reserved) <6> modified: 00000000000f0000 - 0000000000100000 (reserved) <6> modified: 0000000000100000 - 00000000afee0000 (usable) <6> modified: 00000000afee0000 - 00000000afee3000 (ACPI NVS) <6> modified: 00000000afee3000 - 00000000afef0000 (ACPI data) <6> modified: 00000000afef0000 - 00000000aff00000 (reserved) <6> modified: 00000000b0000000 - 00000000c0000000 (reserved) <6> modified: 00000000f0000000 - 00000000f4000000 (reserved) <6> modified: 00000000fec00000 - 0000000100000000 (reserved) <6> modified: 0000000100000000 - 00000001a0000000 (usable) <7>initial memory mapped : 0 - 00a00000 <6>found SMP MP-table at [c00f54d0] f54d0 <6>init_memory_mapping: 0000000000000000-00000000361fe000 <7> 0000000000 - 0000200000 page 4k <7> 0000200000 - 0036000000 page 2M <7> 0036000000 - 00361fe000 page 4k <7>kernel direct mapping tables up to 361fe000 @ 15000-1b000 <6>RAMDISK: 37a58000 - 37feff56 <6>Allocated new RAMDISK: 005af000 - 00b46f56 <6>Move RAMDISK from 0000000037a58000 - 0000000037feff55 to 005af000 - 00b46f55 <4>ACPI: RSDP 000f7060 00024 (v02 Nvidia) <4>ACPI: XSDT afee30c0 00044 (v01 Nvidia ASUSACPI 42302E31 AWRD 00000000) <4>ACPI: FACP afeeb840 000F4 (v03 Nvidia ASUSACPI 42302E31 AWRD 00000000) <4>ACPI: DSDT afee3240 0858F (v01 NVIDIA ASUSACPI 00001000 MSFT 03000000) <4>ACPI: FACS afee0000 00040 <4>ACPI: SSDT afeeba40 0028A (v01 PTLTD POWERNOW 00000001 LTP 00000001) <4>ACPI: MCFG afeebd40 0003C (v01 Nvidia ASUSACPI 42302E31 AWRD 00000000) <4>ACPI: APIC afeeb980 0007C (v01 Nvidia ASUSACPI 42302E31 AWRD 00000000) <7>ACPI: Local APIC address 0xfee00000 <5>5790MB HIGHMEM available. <5>865MB LOWMEM available. <6> mapped low ram: 0 - 361fe000 <6> low ram: 0 - 361fe000 <6> node 0 low ram: 00000000 - 361fe000 <6> node 0 bootmap 00017000 - 0001dc40 <6>(14 early reservations) ==> bootmem [0000000000 - 00361fe000] <6> #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000] <6> #1 [0000001000 - 0000002000] EX TRAMPOLINE ==> [0000001000 - 0000002000] <6> #2 [0000100000 - 00005a8ab8] TEXT DATA BSS ==> [0000100000 - 00005a8ab8] <6> #3 [00005a9000 - 00005ae14d] BRK ==> [00005a9000 - 00005ae14d] <6> #4 [00000f54e0 - 0000100000] BIOS reserved ==> [00000f54e0 - 0000100000] <6> #5 [00000f54d0 - 00000f54e0] MP-table mpf ==> [00000f54d0 - 00000f54e0] <6> #6 [000009f000 - 00000f1400] BIOS reserved ==> [000009f000 - 00000f1400] <6> #7 [00000f1544 - 00000f54d0] BIOS reserved ==> [00000f1544 - 00000f54d0] <6> #8 [00000f1400 - 00000f1544] MP-table mpc ==> [00000f1400 - 00000f1544] <6> #9 [0000010000 - 0000011000] TRAMPOLINE ==> [0000010000 - 0000011000] <6> #10 [0000011000 - 0000015000] ACPI WAKEUP ==> [0000011000 - 0000015000] <6> #11 [0000015000 - 0000017000] PGTABLE ==> [0000015000 - 0000017000] <6> #12 [00005af000 - 0000b46f56] NEW RAMDISK ==> [00005af000 - 0000b46f56] <6> #13 [0000017000 - 000001e000] BOOTMAP ==> [0000017000 - 000001e000] <4>Zone PFN ranges: <4> DMA 0x00000010 -> 0x00001000 <4> Normal 0x00001000 -> 0x000361fe <4> HighMem 0x000361fe -> 0x001a0000 <4>Movable zone start PFN for each node <4>early_node_map[3] active PFN ranges <4> 0: 0x00000010 -> 0x0000009f <4> 0: 0x00000100 -> 0x000afee0 <4> 0: 0x00100000 -> 0x001a0000 <7>On node 0 totalpages: 1375855 <7>free_area_init_node: node 0, pgdat c04cd2c0, node_mem_map c1001200 <7> DMA zone: 32 pages used for memmap <7> DMA zone: 0 pages reserved <7> DMA zone: 3951 pages, LIFO batch:0 <7> Normal zone: 1700 pages used for memmap <7> Normal zone: 215898 pages, LIFO batch:31 <7> HighMem zone: 11581 pages used for memmap <7> HighMem zone: 1142693 pages, LIFO batch:31 <6>Using APIC driver default <6>Nvidia board detected. Ignoring ACPI timer override. <6>If you got timer trouble try acpi_use_timer_override <6>ACPI: PM-Timer IO Port: 0x1008 <7>ACPI: Local APIC address 0xfee00000 <6>ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) <6>ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled) <6>ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1]) <6>ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1]) <6>ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0]) <6>IOAPIC[0]: apic_id 2, version 17, address 0xfec00000, GSI 0-23 <6>ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) <4>ACPI: BIOS IRQ0 pin2 override ignored. <6>ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) <6>ACPI: INT_SRC_OVR (bus 0 bus_irq 14 global_irq 14 high edge) <6>ACPI: INT_SRC_OVR (bus 0 bus_irq 15 global_irq 15 high edge) <7>ACPI: IRQ9 used by override. <7>ACPI: IRQ14 used by override. <7>ACPI: IRQ15 used by override. <6>Using ACPI (MADT) for SMP configuration information <6>SMP: Allowing 2 CPUs, 0 hotplug CPUs <7>nr_irqs_gsi: 24 <6>PM: Registered nosave memory: 000000000009f000 - 00000000000a0000 <6>PM: Registered nosave memory: 00000000000a0000 - 00000000000f0000 <6>PM: Registered nosave memory: 00000000000f0000 - 0000000000100000 <6>Allocating PCI resources starting at c0000000 (gap: c0000000:30000000) <6>setup_percpu: NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:2 nr_node_ids:1 <6>PERCPU: Embedded 12 pages/cpu @c4600000 s26968 r0 d22184 u1048576 <6>pcpu-alloc: s26968 r0 d22184 u1048576 alloc=1*2097152 <6>pcpu-alloc: [0] 0 1 <4>Built 1 zonelists in Zone order, mobility grouping on. Total pages: 1362542 <5>Kernel command line: root=/dev/disk/by-id/ata-WDC_WD6401AALS-00L3B2_WD-WMASY7431406-part6 resume=/dev/sda5 splash=silent vmalloc=144M hpet=force vga=0x31B <6>PID hash table entries: 4096 (order: 2, 16384 bytes) <6>Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) <6>Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) <6>Enabling fast FPU save and restore... done. <6>Enabling unmasked SIMD FPU exception support... done. <6>Initializing CPU#0 <6>allocated 34078400 bytes of page_cgroup <6>please try 'cgroup_disable=memory' option if you don't want memory cgroups <6>Initializing HighMem for node 0 (000361fe:001a0000) <6>Memory: 5404368k/6815744k available (2399k kernel code, 98040k reserved, 1515k data, 444k init, 4617096k highmem) <6>virtual kernel memory layout: <6> fixmap : 0xfff1f000 - 0xfffff000 ( 896 kB) <6> pkmap : 0xffa00000 - 0xffc00000 (2048 kB) <6> vmalloc : 0xf69fe000 - 0xff9fe000 ( 144 MB) <6> lowmem : 0xc0000000 - 0xf61fe000 ( 865 MB) <6> .init : 0xc04d3000 - 0xc0542000 ( 444 kB) <6> .data : 0xc0357d4e - 0xc04d2968 (1515 kB) <6> .text : 0xc0100000 - 0xc0357d4e (2399 kB) <6>Checking if this processor honours the WP bit even in supervisor mode...Ok. <6>Hierarchical RCU implementation. <6>NR_IRQS:512 <6>Extended CMOS year: 2000 <7>spurious 8259A interrupt: IRQ7. <4>Console: colour dummy device 80x25 <6>console [tty0] enabled <4>Fast TSC calibration using PIT <4>Detected 2612.304 MHz processor. <6>Calibrating delay loop (skipped), value calculated using timer frequency.. 5224.60 BogoMIPS (lpj=10449216) <6>Security Framework initialized <6>SELinux: Disabled at boot. <4>Mount-cache hash table entries: 512 <6>Initializing cgroup subsys ns <6>Initializing cgroup subsys cpuacct <6>Initializing cgroup subsys memory <6>Initializing cgroup subsys devices <6>Initializing cgroup subsys freezer <6>Initializing cgroup subsys blkio <6>CPU: Physical Processor ID: 0 <6>CPU: Processor Core ID: 0 <6>mce: CPU supports 5 MCE banks <6>using C1E aware idle routine <6>Performance Events: AMD PMU driver. <6>... version: 0 <6>... bit width: 48 <6>... generic registers: 4 <6>... value mask: 0000ffffffffffff <6>... max period: 00007fffffffffff <6>... fixed-purpose events: 0 <6>... event mask: 000000000000000f <6>Checking 'hlt' instruction... OK. <6>ACPI: Core revision 20091214 <6>Enabling APIC mode: Flat. Using 1 I/O APICs <6>..TIMER: vector=0x30 apic1=0 pin1=0 apic2=-1 pin2=-1 <6>CPU0: AMD Athlon(tm) 64 X2 Dual Core Processor 5000+ stepping 01 <6>Booting Node 0, Processors #1 Ok. <6>Initializing CPU#1 <6>Brought up 2 CPUs <6>Total of 2 processors activated (10448.63 BogoMIPS). <6>System has AMD C1E enabled <6>Switch to broadcast mode on CPU1 <6>Switch to broadcast mode on CPU0 <6>regulator: core version 0.5 <6>NET: Registered protocol family 16 <6>EISA bus registered <6>ACPI: bus type pci registered <6>PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf0000000-0xf3ffffff] (base 0xf0000000) <6>PCI: MMCONFIG at [mem 0xf0000000-0xf3ffffff] reserved in E820 <6>PCI: Using MMCONFIG for extended config space <6>PCI: Using configuration type 1 for base access <4>bio: create slab at 0 <7>ACPI: EC: Look up EC in DSDT <6>ACPI: Interpreter enabled <6>ACPI: (supports S0 S1 S3 S4 S5) <6>ACPI: Using IOAPIC for interrupt routing <6>ACPI: No dock devices found. <6>ACPI: PCI Root Bridge [PCI0] (0000:00) <6>pci_root PNP0A08:00: ignoring host bridge windows from ACPI; boot with "pci=use_crs" to use them <7>pci_root PNP0A08:00: host bridge window [io 0x0000-0x03af] (ignored) <7>pci_root PNP0A08:00: host bridge window [io 0x03e0-0x0cf7] (ignored) <7>pci_root PNP0A08:00: host bridge window [io 0x1c00-0x1c7f] (ignored) <7>pci_root PNP0A08:00: host bridge window [io 0x7000-0xffff] (ignored) <7>pci_root PNP0A08:00: host bridge window [io 0x03b0-0x03df] (ignored) <7>pci_root PNP0A08:00: host bridge window [mem 0x000a0000-0x000bffff] (ignored) <7>pci_root PNP0A08:00: host bridge window [mem 0xc0000000-0xefffffff] (ignored) <7>pci_root PNP0A08:00: host bridge window [mem 0xf4000000-0xfe02ffff] (ignored) <7>pci 0000:00:01.0: Force enabled HPET at 0xfed00000 <7>pci 0000:00:01.1: reg 10: [io 0xfc00-0xfc3f] <7>pci 0000:00:01.1: reg 20: [io 0x1c00-0x1c3f] <7>pci 0000:00:01.1: reg 24: [io 0x1c40-0x1c7f] <7>pci 0000:00:01.1: PME# supported from D3hot D3cold <7>pci 0000:00:01.1: PME# disabled <7>pci 0000:00:02.0: reg 10: [mem 0xfe02f000-0xfe02ffff] <7>pci 0000:00:02.0: supports D1 D2 <7>pci 0000:00:02.0: PME# supported from D0 D1 D2 D3hot D3cold <7>pci 0000:00:02.0: PME# disabled <7>pci 0000:00:02.1: reg 10: [mem 0xfe02e000-0xfe02e0ff] <7>pci 0000:00:02.1: supports D1 D2 <7>pci 0000:00:02.1: PME# supported from D0 D1 D2 D3hot D3cold <7>pci 0000:00:02.1: PME# disabled <7>pci 0000:00:05.0: reg 10: [mem 0xfe024000-0xfe027fff] <7>pci 0000:00:05.0: PME# supported from D3hot D3cold <7>pci 0000:00:05.0: PME# disabled <7>pci 0000:00:06.0: reg 20: [io 0xf000-0xf00f] <7>pci 0000:00:07.0: reg 10: [mem 0xfe02d000-0xfe02dfff] <7>pci 0000:00:07.0: reg 14: [io 0xec00-0xec07] <7>pci 0000:00:07.0: supports D1 D2 <7>pci 0000:00:07.0: PME# supported from D0 D1 D2 D3hot D3cold <7>pci 0000:00:07.0: PME# disabled <7>pci 0000:00:08.0: reg 10: [io 0x09f0-0x09f7] <7>pci 0000:00:08.0: reg 14: [io 0x0bf0-0x0bf3] <7>pci 0000:00:08.0: reg 18: [io 0x0970-0x0977] <7>pci 0000:00:08.0: reg 1c: [io 0x0b70-0x0b73] <7>pci 0000:00:08.0: reg 20: [io 0xd800-0xd80f] <7>pci 0000:00:08.0: reg 24: [mem 0xfe02c000-0xfe02cfff] <7>pci 0000:00:08.1: reg 10: [io 0x09e0-0x09e7] <7>pci 0000:00:08.1: reg 14: [io 0x0be0-0x0be3] <7>pci 0000:00:08.1: reg 18: [io 0x0960-0x0967] <7>pci 0000:00:08.1: reg 1c: [io 0x0b60-0x0b63] <7>pci 0000:00:08.1: reg 20: [io 0xc400-0xc40f] <7>pci 0000:00:08.1: reg 24: [mem 0xfe02b000-0xfe02bfff] <7>pci 0000:00:09.0: PME# supported from D0 D1 D2 D3hot D3cold <7>pci 0000:00:09.0: PME# disabled <7>pci 0000:00:0b.0: PME# supported from D0 D1 D2 D3hot D3cold <7>pci 0000:00:0b.0: PME# disabled <7>pci 0000:00:0c.0: PME# supported from D0 D1 D2 D3hot D3cold <7>pci 0000:00:0c.0: PME# disabled <7>pci 0000:00:0d.0: reg 10: [mem 0xfb000000-0xfbffffff] <7>pci 0000:00:0d.0: reg 14: [mem 0xe0000000-0xefffffff 64bit pref] <7>pci 0000:00:0d.0: reg 1c: [mem 0xfc000000-0xfcffffff 64bit] <7>pci 0000:00:0d.0: reg 30: [mem 0x00000000-0x0001ffff pref] <7>pci 0000:01:06.0: reg 10: [mem 0xfd8ff000-0xfd8ff7ff] <7>pci 0000:01:06.0: reg 14: [mem 0xfd8f8000-0xfd8fbfff] <7>pci 0000:01:06.0: supports D1 D2 <7>pci 0000:01:06.0: PME# supported from D0 D1 D2 D3hot <7>pci 0000:01:06.0: PME# disabled <7>pci 0000:01:07.0: reg 10: [io 0xbc00-0xbc07] <7>pci 0000:01:07.0: reg 14: [mem 0xfd8fe000-0xfd8fe0ff] <7>pci 0000:01:07.0: supports D1 D2 <7>pci 0000:01:07.0: PME# supported from D0 D1 D2 D3hot <7>pci 0000:01:07.0: PME# disabled <7>pci 0000:01:08.0: reg 10: [mem 0xfdfff000-0xfdffffff pref] <7>pci 0000:01:08.1: reg 10: [mem 0xfdffe000-0xfdffefff pref] <6>pci 0000:00:04.0: PCI bridge to [bus 01-01] (subtractive decode) <7>pci 0000:00:04.0: bridge window [io 0xb000-0xbfff] <7>pci 0000:00:04.0: bridge window [mem 0xfd800000-0xfd8fffff] <7>pci 0000:00:04.0: bridge window [mem 0xfdf00000-0xfdffffff pref] <6>pci 0000:00:09.0: PCI bridge to [bus 02-02] <7>pci 0000:00:09.0: bridge window [io 0xa000-0xafff] <7>pci 0000:00:09.0: bridge window [mem 0xfde00000-0xfdefffff] <7>pci 0000:00:09.0: bridge window [mem 0xfdd00000-0xfddfffff 64bit pref] <7>pci 0000:03:00.0: reg 24: [mem 0xfdcfe000-0xfdcfffff] <7>pci 0000:03:00.0: reg 30: [mem 0xfdce0000-0xfdceffff pref] <7>pci 0000:03:00.0: PME# supported from D3hot <7>pci 0000:03:00.0: PME# disabled <7>pci 0000:03:00.1: reg 10: [io 0x9c00-0x9c07] <7>pci 0000:03:00.1: reg 14: [io 0x9800-0x9803] <7>pci 0000:03:00.1: reg 18: [io 0x9400-0x9407] <7>pci 0000:03:00.1: reg 1c: [io 0x9000-0x9003] <7>pci 0000:03:00.1: reg 20: [io 0x8c00-0x8c0f] <6>pci 0000:03:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force' <6>pci 0000:00:0b.0: PCI bridge to [bus 03-03] <7>pci 0000:00:0b.0: bridge window [io 0x8000-0x9fff] <7>pci 0000:00:0b.0: bridge window [mem 0xfdc00000-0xfdcfffff] <7>pci 0000:00:0b.0: bridge window [mem 0xfdb00000-0xfdbfffff 64bit pref] <6>pci 0000:00:0c.0: PCI bridge to [bus 04-04] <7>pci 0000:00:0c.0: bridge window [io 0x7000-0x7fff] <7>pci 0000:00:0c.0: bridge window [mem 0xfda00000-0xfdafffff] <7>pci 0000:00:0c.0: bridge window [mem 0xfd900000-0xfd9fffff 64bit pref] <7>pci_bus 0000:00: on NUMA node 0 <7>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] <7>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.HUB0._PRT] <6>ACPI: PCI Interrupt Link [LNK1] (IRQs 5 7 9 *10 11 14 15) <6>ACPI: PCI Interrupt Link [LNK2] (IRQs 5 7 9 10 *11 14 15) <6>ACPI: PCI Interrupt Link [LNK3] (IRQs 5 7 9 10 11 14 15) *0, disabled. <6>ACPI: PCI Interrupt Link [LNK4] (IRQs 5 7 9 10 11 14 15) *0, disabled. <6>ACPI: PCI Interrupt Link [LNK5] (IRQs 5 7 9 10 11 14 15) *0, disabled. <6>ACPI: PCI Interrupt Link [LNK6] (IRQs *5 7 9 10 11 14 15) <6>ACPI: PCI Interrupt Link [LNK7] (IRQs 5 7 9 10 11 14 15) *0, disabled. <6>ACPI: PCI Interrupt Link [LNK8] (IRQs 5 7 9 10 11 14 15) *0, disabled. <6>ACPI: PCI Interrupt Link [LIGP] (IRQs 5 7 9 *10 11 14 15) <6>ACPI: PCI Interrupt Link [LP2P] (IRQs 5 7 9 10 11 14 15) *0, disabled. <6>ACPI: PCI Interrupt Link [LUBA] (IRQs 5 7 9 10 11 14 15) *0, disabled. <6>ACPI: PCI Interrupt Link [LMAC] (IRQs 5 7 9 10 *11 14 15) <6>ACPI: PCI Interrupt Link [LAZA] (IRQs *5 7 9 10 11 14 15) <6>ACPI: PCI Interrupt Link [LPMU] (IRQs 5 7 9 10 11 14 15) *0, disabled. <6>ACPI: PCI Interrupt Link [LSMB] (IRQs 5 7 9 10 11 14 15) *0, disabled. <6>ACPI: PCI Interrupt Link [LUB2] (IRQs 5 7 9 10 11 14 15) *0, disabled. <6>ACPI: PCI Interrupt Link [LIDE] (IRQs 5 7 9 10 11 14 15) *0, disabled. <6>ACPI: PCI Interrupt Link [LSID] (IRQs 5 7 9 *10 11 14 15) <6>ACPI: PCI Interrupt Link [LFID] (IRQs 5 7 9 10 *11 14 15) <6>ACPI: PCI Interrupt Link [APC1] (IRQs 16) *0 <6>ACPI: PCI Interrupt Link [APC2] (IRQs 17) *0 <6>ACPI: PCI Interrupt Link [APC3] (IRQs 18) *0, disabled. <6>ACPI: PCI Interrupt Link [APC4] (IRQs 19) *0, disabled. <6>ACPI: PCI Interrupt Link [APC5] (IRQs 16) *0, disabled. <6>ACPI: PCI Interrupt Link [APC6] (IRQs 16) *0 <6>ACPI: PCI Interrupt Link [APC7] (IRQs 16) *0, disabled. <6>ACPI: PCI Interrupt Link [APC8] (IRQs 16) *0, disabled. <6>ACPI: PCI Interrupt Link [AIGP] (IRQs 22 23) *0 <6>ACPI: PCI Interrupt Link [APCF] (IRQs 22 23) *0, disabled. <6>ACPI: PCI Interrupt Link [APCH] (IRQs 22 23) *0 <6>ACPI: PCI Interrupt Link [APMU] (IRQs 22 23) *0, disabled. <6>ACPI: PCI Interrupt Link [AAZA] (IRQs 22 23) *0 <6>ACPI: PCI Interrupt Link [APCS] (IRQs 22 23) *0, disabled. <6>ACPI: PCI Interrupt Link [APCL] (IRQs 22 23) *0, disabled. <6>ACPI: PCI Interrupt Link [APCM] (IRQs 22 23) *0, disabled. <6>ACPI: PCI Interrupt Link [APCZ] (IRQs 22 23) *0, disabled. <6>ACPI: PCI Interrupt Link [APSI] (IRQs 20) *0 <6>ACPI: PCI Interrupt Link [APSJ] (IRQs 21) *0 <6>vgaarb: device added: PCI:0000:00:0d.0,decodes=io+mem,owns=io+mem,locks=none <6>vgaarb: loaded <6>PCI: Using ACPI for IRQ routing <7>PCI: pci_cache_line_size set to 64 bytes <6>NetLabel: Initializing <6>NetLabel: domain hash size = 128 <6>NetLabel: protocols = UNLABELED CIPSOv4 <6>NetLabel: unlabeled traffic allowed by default <7>hpet clockevent registered <6>HPET: 3 timers in total, 0 timers will be used for per-cpu timer <6>hpet0: at MMIO 0xfed00000, IRQs 2, 8, 31 <6>hpet0: 3 comparators, 32-bit 25.000000 MHz counter <6>Switching to clocksource hpet <6>pnp: PnP ACPI init <6>ACPI: bus type pnp registered <6>pnp: PnP ACPI: found 14 devices <6>ACPI: ACPI bus type pnp unregistered <6>PnPBIOS: Disabled by ACPI PNP <6>system 00:01: [io 0x1000-0x107f] has been reserved <6>system 00:01: [io 0x1080-0x10ff] has been reserved <6>system 00:01: [io 0x1400-0x147f] has been reserved <6>system 00:01: [io 0x1480-0x14ff] has been reserved <6>system 00:01: [io 0x1800-0x187f] has been reserved <6>system 00:01: [io 0x1880-0x18ff] has been reserved <6>system 00:02: [io 0x0b78-0x0b7b] has been reserved <6>system 00:02: [io 0x0f78-0x0f7b] has been reserved <6>system 00:02: [io 0x0a78-0x0a7b] has been reserved <6>system 00:02: [io 0x0e78-0x0e7b] has been reserved <6>system 00:02: [io 0x0bbc-0x0bbf] has been reserved <6>system 00:02: [io 0x0fbc-0x0fbf] has been reserved <6>system 00:02: [io 0x04d0-0x04d1] has been reserved <6>system 00:02: [io 0x0294-0x0297] has been reserved <6>system 00:02: [io 0x0800-0x087f] has been reserved <6>system 00:02: [io 0x0290-0x0297] could not be reserved <6>system 00:0c: [mem 0xf0000000-0xf3ffffff] has been reserved <6>system 00:0d: [mem 0x000d2800-0x000d3fff] has been reserved <6>system 00:0d: [mem 0x000f0000-0x000f7fff] could not be reserved <6>system 00:0d: [mem 0x000f8000-0x000fbfff] could not be reserved <6>system 00:0d: [mem 0x000fc000-0x000fffff] could not be reserved <6>system 00:0d: [mem 0xafee0000-0xafefffff] could not be reserved <6>system 00:0d: [mem 0xffff0000-0xffffffff] has been reserved <6>system 00:0d: [mem 0x00000000-0x0009ffff] could not be reserved <6>system 00:0d: [mem 0x00100000-0xafedffff] could not be reserved <6>system 00:0d: [mem 0xafff0000-0xbffeffff] could not be reserved <6>system 00:0d: [mem 0xfec00000-0xfec00fff] could not be reserved <6>system 00:0d: [mem 0xfee00000-0xfeefffff] has been reserved <6>system 00:0d: [mem 0xfefff000-0xfeffffff] has been reserved <6>system 00:0d: [mem 0xfff80000-0xfff80fff] has been reserved <6>system 00:0d: [mem 0xfff90000-0xfffbffff] has been reserved <6>system 00:0d: [mem 0xfffed000-0xfffeffff] has been reserved <6>pci 0000:00:0d.0: BAR 6: assigned [mem 0xc0000000-0xc001ffff pref] <6>pci 0000:00:04.0: PCI bridge to [bus 01-01] <6>pci 0000:00:04.0: bridge window [io 0xb000-0xbfff] <6>pci 0000:00:04.0: bridge window [mem 0xfd800000-0xfd8fffff] <6>pci 0000:00:04.0: bridge window [mem 0xfdf00000-0xfdffffff pref] <6>pci 0000:00:09.0: PCI bridge to [bus 02-02] <6>pci 0000:00:09.0: bridge window [io 0xa000-0xafff] <6>pci 0000:00:09.0: bridge window [mem 0xfde00000-0xfdefffff] <6>pci 0000:00:09.0: bridge window [mem 0xfdd00000-0xfddfffff 64bit pref] <6>pci 0000:00:0b.0: PCI bridge to [bus 03-03] <6>pci 0000:00:0b.0: bridge window [io 0x8000-0x9fff] <6>pci 0000:00:0b.0: bridge window [mem 0xfdc00000-0xfdcfffff] <6>pci 0000:00:0b.0: bridge window [mem 0xfdb00000-0xfdbfffff 64bit pref] <6>pci 0000:00:0c.0: PCI bridge to [bus 04-04] <6>pci 0000:00:0c.0: bridge window [io 0x7000-0x7fff] <6>pci 0000:00:0c.0: bridge window [mem 0xfda00000-0xfdafffff] <6>pci 0000:00:0c.0: bridge window [mem 0xfd900000-0xfd9fffff 64bit pref] <7>pci 0000:00:04.0: setting latency timer to 64 <7>pci 0000:00:09.0: setting latency timer to 64 <7>pci 0000:00:0b.0: setting latency timer to 64 <7>pci 0000:00:0c.0: setting latency timer to 64 <7>pci_bus 0000:00: resource 0 [io 0x0000-0xffff] <7>pci_bus 0000:00: resource 1 [mem 0x00000000-0xffffffffffffffff] <7>pci_bus 0000:01: resource 0 [io 0xb000-0xbfff] <7>pci_bus 0000:01: resource 1 [mem 0xfd800000-0xfd8fffff] <7>pci_bus 0000:01: resource 2 [mem 0xfdf00000-0xfdffffff pref] <7>pci_bus 0000:01: resource 3 [io 0x0000-0xffff] <7>pci_bus 0000:01: resource 4 [mem 0x00000000-0xffffffffffffffff] <7>pci_bus 0000:02: resource 0 [io 0xa000-0xafff] <7>pci_bus 0000:02: resource 1 [mem 0xfde00000-0xfdefffff] <7>pci_bus 0000:02: resource 2 [mem 0xfdd00000-0xfddfffff 64bit pref] <7>pci_bus 0000:03: resource 0 [io 0x8000-0x9fff] <7>pci_bus 0000:03: resource 1 [mem 0xfdc00000-0xfdcfffff] <7>pci_bus 0000:03: resource 2 [mem 0xfdb00000-0xfdbfffff 64bit pref] <7>pci_bus 0000:04: resource 0 [io 0x7000-0x7fff] <7>pci_bus 0000:04: resource 1 [mem 0xfda00000-0xfdafffff] <7>pci_bus 0000:04: resource 2 [mem 0xfd900000-0xfd9fffff 64bit pref] <6>NET: Registered protocol family 2 <6>IP route cache hash table entries: 32768 (order: 5, 131072 bytes) <6>TCP established hash table entries: 131072 (order: 8, 1048576 bytes) <6>TCP bind hash table entries: 65536 (order: 7, 524288 bytes) <6>TCP: Hash tables configured (established 131072 bind 65536) <6>TCP reno registered <6>UDP hash table entries: 512 (order: 2, 16384 bytes) <6>UDP-Lite hash table entries: 512 (order: 2, 16384 bytes) <6>NET: Registered protocol family 1 <6>pci 0000:00:00.0: Found enabled HT MSI Mapping <6>pci 0000:00:00.0: Found enabled HT MSI Mapping <6>pci 0000:00:00.0: Found enabled HT MSI Mapping <6>pci 0000:00:00.0: Found enabled HT MSI Mapping <6>pci 0000:00:00.0: Found enabled HT MSI Mapping <6>pci 0000:00:00.0: Found enabled HT MSI Mapping <6>pci 0000:00:00.0: Found enabled HT MSI Mapping <6>pci 0000:00:00.0: Found enabled HT MSI Mapping <7>pci 0000:00:0d.0: Boot video device <7>PCI: CLS 32 bytes, default 64 <6>Unpacking initramfs... <6>Freeing initrd memory: 5727k freed <6>Scanning for low memory corruption every 60 seconds <6>audit: initializing netlink socket (disabled) <5>type=2000 audit(1267270471.417:1): initialized <4>highmem bounce pool size: 64 pages <6>HugeTLB registered 2 MB page size, pre-allocated 0 pages <5>VFS: Disk quotas dquot_6.5.2 <4>Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) <6>msgmni has been set to 1550 <6>alg: No test for stdrng (krng) <6>Block layer SCSI generic (bsg) driver version 0.4 loaded (major 254) <6>io scheduler noop registered <6>io scheduler deadline registered <6>io scheduler cfq registered (default) <7>pcieport 0000:00:09.0: setting latency timer to 64 <7>pcieport 0000:00:09.0: irq 24 for MSI/MSI-X <7>pcieport 0000:00:0b.0: setting latency timer to 64 <7>pcieport 0000:00:0b.0: irq 25 for MSI/MSI-X <7>pcieport 0000:00:0c.0: setting latency timer to 64 <7>pcieport 0000:00:0c.0: irq 26 for MSI/MSI-X <6>vesafb: framebuffer at 0xe0000000, mapped to 0xf6a80000, using 10240k, total 262144k <6>vesafb: mode is 1280x1024x32, linelength=5120, pages=0 <6>vesafb: protected mode interface info at c000:d030 <6>vesafb: pmi: set display start = c00cd066, set palette = c00cd0d0 <6>vesafb: pmi: ports = 3b4 3b5 3ba 3c0 3c1 3c4 3c5 3c6 3c7 3c8 3c9 3cc 3ce 3cf 3d0 3d1 3d2 3d3 3d4 3d5 3da <6>vesafb: scrolling: redraw <6>vesafb: Truecolor: size=8:8:8:8, shift=24:16:8:0 <4>Console: switching to colour frame buffer device 160x64 <6>fb0: VESA VGA frame buffer device <6>isapnp: Scanning for PnP cards... <6>isapnp: No Plug & Play device found <6>Serial: 8250/16550 driver, 8 ports, IRQ sharing enabled <6>serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A <6>00:08: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A <6>PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12 <6>serio: i8042 KBD port at 0x60,0x64 irq 1 <6>serio: i8042 AUX port at 0x60,0x64 irq 12 <6>mice: PS/2 mouse device common for all mice <6>EISA: Probing bus 0 at eisa.0 <4>Cannot allocate resource for EISA slot 1 <4>Cannot allocate resource for EISA slot 7 <4>Cannot allocate resource for EISA slot 8 <6>EISA: Detected 0 cards. <6>cpuidle: using governor ladder <6>cpuidle: using governor menu <6>TCP cubic registered <6>Using IPI No-Shortcut mode <6>input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0 <4>logips2pp: Detected unknown logitech mouse model 102 <6>input: ImExPS/2 Logitech Explorer Mouse as /devices/platform/i8042/serio1/input/input1 <4>registered taskstats version 1 <6>Freeing unused kernel memory: 444k freed <6>Write protecting the kernel text: 2400k <6>Write protecting the kernel read-only data: 1244k <5>SCSI subsystem initialized <7>libata version 3.00 loaded. <7>sata_nv 0000:00:08.0: version 3.5 <4>ACPI: PCI Interrupt Link [APSI] enabled at IRQ 20 <6>sata_nv 0000:00:08.0: PCI INT A -> Link[APSI] -> GSI 20 (level, low) -> IRQ 20 <7>sata_nv 0000:00:08.0: setting latency timer to 64 <6>scsi0 : sata_nv <6>scsi1 : sata_nv <6>ata1: SATA max UDMA/133 cmd 0x9f0 ctl 0xbf0 bmdma 0xd800 irq 20 <6>ata2: SATA max UDMA/133 cmd 0x970 ctl 0xb70 bmdma 0xd808 irq 20 <4>ACPI: PCI Interrupt Link [APSJ] enabled at IRQ 21 <6>sata_nv 0000:00:08.1: PCI INT B -> Link[APSJ] -> GSI 21 (level, low) -> IRQ 21 <7>sata_nv 0000:00:08.1: setting latency timer to 64 <6>scsi2 : sata_nv <6>scsi3 : sata_nv <6>ata3: SATA max UDMA/133 cmd 0x9e0 ctl 0xbe0 bmdma 0xc400 irq 21 <6>ata4: SATA max UDMA/133 cmd 0x960 ctl 0xb60 bmdma 0xc408 irq 21 <6>ata1: SATA link down (SStatus 0 SControl 300) <6>ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300) <6>ata3.00: ATAPI: HL-DT-ST DVDRAM GSA-H66N, CB00, max UDMA/100 <6>ata3.00: configured for UDMA/100 <6>ata2: SATA link down (SStatus 0 SControl 300) <5>scsi 2:0:0:0: CD-ROM HL-DT-ST DVDRAM GSA-H66N CB00 PQ: 0 ANSI: 5 <6>ata4: SATA link down (SStatus 0 SControl 300) <7>pata_amd 0000:00:06.0: version 0.4.1 <7>pata_amd 0000:00:06.0: setting latency timer to 64 <6>scsi4 : pata_amd <6>scsi5 : pata_amd <6>ata5: PATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0xf000 irq 14 <6>ata6: PATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0xf008 irq 15 <7>ata6: port disabled. ignoring. <7>ahci 0000:03:00.0: version 3.0 <4>ACPI: PCI Interrupt Link [APC6] enabled at IRQ 16 <6>ahci 0000:03:00.0: PCI INT A -> Link[APC6] -> GSI 16 (level, low) -> IRQ 16 <6>ahci 0000:03:00.0: AHCI 0001.0000 32 slots 2 ports 3 Gbps 0x3 impl SATA mode <6>ahci 0000:03:00.0: flags: 64bit ncq pm led clo pmp pio slum part <7>ahci 0000:03:00.0: setting latency timer to 64 <6>scsi6 : ahci <6>scsi7 : ahci <6>ata7: SATA max UDMA/133 abar m8192@0xfdcfe000 port 0xfdcfe100 irq 16 <6>ata8: SATA max UDMA/133 abar m8192@0xfdcfe000 port 0xfdcfe180 irq 16 <6>ata7: SATA link down (SStatus 0 SControl 300) <6>ata8: SATA link up 3.0 Gbps (SStatus 123 SControl 300) <6>ata8.00: ATA-8: WDC WD6401AALS-00L3B2, 01.03B01, max UDMA/133 <6>ata8.00: 1250263728 sectors, multi 0: LBA48 NCQ (depth 31/32), AA <6>ata8.00: configured for UDMA/133 <5>scsi 7:0:0:0: Direct-Access ATA WDC WD6401AALS-0 01.0 PQ: 0 ANSI: 5 <6>pata_jmicron 0000:03:00.1: enabling device (0000 -> 0001) <4>ACPI: PCI Interrupt Link [APC7] enabled at IRQ 16 <6>pata_jmicron 0000:03:00.1: PCI INT B -> Link[APC7] -> GSI 16 (level, low) -> IRQ 16 <7>pata_jmicron 0000:03:00.1: setting latency timer to 64 <6>scsi8 : pata_jmicron <6>scsi9 : pata_jmicron <6>ata9: PATA max UDMA/100 cmd 0x9c00 ctl 0x9800 bmdma 0x8c00 irq 16 <6>ata10: PATA max UDMA/100 cmd 0x9400 ctl 0x9000 bmdma 0x8c08 irq 16 <6>Uniform Multi-Platform E-IDE driver <5>ACPI: processor limited to max C-state 1 <6>thermal LNXTHERM:01: registered as thermal_zone0 <6>ACPI: Thermal Zone [THRM] (37 C) <6>ACPI: Fan [FAN] (on) <6>BIOS EDD facility v0.16 2004-Jun-25, 1 devices found <6>udevd version 128 started <6>usbcore: registered new interface driver usbfs <6>usbcore: registered new interface driver hub <6>usbcore: registered new device driver usb <6>ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver <5>sd 7:0:0:0: [sda] 1250263728 512-byte logical blocks: (640 GB/596 GiB) <5>sd 7:0:0:0: [sda] Write Protect is off <7>sd 7:0:0:0: [sda] Mode Sense: 00 3a 00 00 <4>ACPI: PCI Interrupt Link [APCL] enabled at IRQ 23 <5>sd 7:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA <6> sda: sda1 sda2 sda3 < sda5 <6>ehci_hcd 0000:00:02.1: PCI INT B -> Link[APCL] -> GSI 23 (level, low) -> IRQ 23 <4> sda6 <7>ehci_hcd 0000:00:02.1: setting latency timer to 64 <4> sda7 > <6>ehci_hcd 0000:00:02.1: EHCI Host Controller <5>sd 7:0:0:0: [sda] Attached SCSI disk <6>ehci_hcd 0000:00:02.1: new USB bus registered, assigned bus number 1 <6>ehci_hcd 0000:00:02.1: debug port 1 <7>ehci_hcd 0000:00:02.1: cache line size of 32 is not supported <6>ehci_hcd 0000:00:02.1: irq 23, io mem 0xfe02e000 <6>ehci_hcd 0000:00:02.1: USB 2.0 started, EHCI 1.00 <6>usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 <6>usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 <6>usb usb1: Product: EHCI Host Controller <6>usb usb1: Manufacturer: Linux 2.6.33-0.1-pae ehci_hcd <6>usb usb1: SerialNumber: 0000:00:02.1 <6>hub 1-0:1.0: USB hub found <6>hub 1-0:1.0: 10 ports detected <6>ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver <4>ACPI: PCI Interrupt Link [APCF] enabled at IRQ 22 <6>ohci_hcd 0000:00:02.0: PCI INT A -> Link[APCF] -> GSI 22 (level, low) -> IRQ 22 <7>ohci_hcd 0000:00:02.0: setting latency timer to 64 <6>ohci_hcd 0000:00:02.0: OHCI Host Controller <6>ohci_hcd 0000:00:02.0: new USB bus registered, assigned bus number 2 <6>ohci_hcd 0000:00:02.0: irq 22, io mem 0xfe02f000 <6>usb usb2: New USB device found, idVendor=1d6b, idProduct=0001 <6>usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 <6>usb usb2: Product: OHCI Host Controller <6>usb usb2: Manufacturer: Linux 2.6.33-0.1-pae ohci_hcd <6>usb usb2: SerialNumber: 0000:00:02.0 <6>hub 2-0:1.0: USB hub found <6>hub 2-0:1.0: 10 ports detected <6>PM: Starting manual resume from disk <6>usb 1-5: new high speed USB device using ehci_hcd and address 3 <6>usb 1-5: New USB device found, idVendor=0bda, idProduct=8187 <6>usb 1-5: New USB device strings: Mfr=1, Product=2, SerialNumber=3 <6>usb 1-5: Product: RTL8187_Wireless <6>usb 1-5: Manufacturer: Manufacturer_Realtek_RTL8187_ <6>usb 1-5: SerialNumber: 0015AF08A9E5 <6>usb 1-10: new high speed USB device using ehci_hcd and address 4 <6>kjournald starting. Commit interval 5 seconds <6>EXT3-fs (sda6): using internal journal <6>EXT3-fs (sda6): mounted filesystem with writeback data mode <6>usb 1-10: New USB device found, idVendor=0bda, idProduct=0151 <6>usb 1-10: New USB device strings: Mfr=1, Product=2, SerialNumber=3 <6>usb 1-10: Product: USB2.0-CRW <6>usb 1-10: Manufacturer: Generic <6>usb 1-10: SerialNumber: 20060413092100000 <6>usb 2-1: new full speed USB device using ohci_hcd and address 2 <6>usb 2-1: New USB device found, idVendor=03f0, idProduct=3104 <6>usb 2-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3 <6>usb 2-1: Product: DeskJet 960C <6>usb 2-1: Manufacturer: Hewlett-Packard <6>usb 2-1: SerialNumber: HU1BU1S14HRO <6>udevd version 128 started <6>Floppy drive(s): fd0 is 1.44M <5>scsi 2:0:0:0: Attached scsi generic sg0 type 5 <5>sd 7:0:0:0: Attached scsi generic sg1 type 0 <6>FDC 0 is a post-1991 82077 <6>forcedeth: Reverse Engineered nForce ethernet driver. Version 0.64. <6>input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input2 <6>ACPI: Power Button [PWRB] <6>input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3 <6>ACPI: Power Button [PWRF] <6>Initializing USB Mass Storage driver... <6>input: PC Speaker as /devices/platform/pcspkr/input/input4 <4>sr0: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray <6>Uniform CD-ROM driver Revision: 3.20 <7>sr 2:0:0:0: Attached scsi CD-ROM sr0 <6>usblp0: USB Bidirectional printer dev 2 if 0 alt 0 proto 2 vid 0x03F0 pid 0x3104 <6>usbcore: registered new interface driver usblp <6>scsi10 : usb-storage 1-10:1.0 <6>usbcore: registered new interface driver usb-storage <6>Linux agpgart interface v0.103 <6>USB Mass Storage support registered. <6>cfg80211: Calling CRDA to update world regulatory domain <6>parport_pc 00:09: reported by Plug and Play ACPI <6>parport0: PC-style at 0x378 (0x778), irq 7, dma 3 [PCSPP,TRISTATE,COMPAT,ECP,DMA] <4>ACPI: PCI Interrupt Link [APCH] enabled at IRQ 23 <6>forcedeth 0000:00:07.0: PCI INT A -> Link[APCH] -> GSI 23 (level, low) -> IRQ 23 <7>forcedeth 0000:00:07.0: setting latency timer to 64 <6>[drm] Initialized drm 1.1.0 20060810 <4>ACPI: PCI Interrupt Link [APC1] enabled at IRQ 16 <6>ohci1394 0000:01:06.0: PCI INT A -> Link[APC1] -> GSI 16 (level, low) -> IRQ 16 <6>Linux video capture interface: v2.00 <6>ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[16] MMIO=[fd8ff000-fd8ff7ff] Max Packet=[2048] IR/IT contexts=[4/8] <6>ppdev: user-space parallel port driver <6>rtc_cmos 00:04: RTC can wake from S4 <6>rtc_cmos 00:04: rtc core: registered rtc_cmos as rtc0 <6>rtc0: alarms up to one year, y3k, 242 bytes nvram, hpet irqs <6>bttv: driver version 0.9.18 loaded <6>bttv: using 8 buffers with 2080k (520 pages) each for capture <6>bttv: Bt8xx card found (0). <4>ACPI: PCI Interrupt Link [APC3] enabled at IRQ 18 <6>bttv 0000:01:08.0: PCI INT A -> Link[APC3] -> GSI 18 (level, low) -> IRQ 18 <6>bttv0: Bt878 (rev 17) at 0000:01:08.0, irq: 18, latency: 32, mmio: 0xfdfff000 <6>bttv0: detected: Hauppauge WinTV [card=10], PCI subsystem ID is 0070:13eb <6>bttv0: using: Hauppauge (bt878) [card=10,autodetected] <4>IRQ 18/bttv0: IRQF_DISABLED is not guaranteed on shared IRQs <7>bttv0: gpio: en=00000000, out=00000000 in=00ffffdb [init] <6>bttv0: Hauppauge/Voodoo msp34xx: reset line init [5] <6>bt878 #0 [sw]: Test OK <6>tveeprom 0-0050: Hauppauge model 37284, rev B421, serial# 5111944 <6>tveeprom 0-0050: tuner model is Philips FM1216 (idx 21, type 5) <6>tveeprom 0-0050: TV standards PAL(B/G) (eeprom 0x04) <6>tveeprom 0-0050: audio processor is MSP3410D (idx 5) <6>tveeprom 0-0050: has radio <4>bttv0: Hauppauge eeprom indicates model#37284 <6>bttv0: tuner type=5 <6>forcedeth 0000:00:07.0: ifname eth0, PHY OUI 0x50ef @ 1, addr 00:18:f3:a7:44:77 <6>forcedeth 0000:00:07.0: highdma pwrctl mgmt gbit lnktim msi desc-v3 <4>k8temp 0000:00:18.3: Temperature readouts might be wrong - check erratum #141 <3>ACPI: I/O resource nForce2_smbus [0x1c00-0x1c3f] conflicts with ACPI region SM00 [0x1c00-0x1c05] <6>ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver <3>nForce2_smbus 0000:00:01.1: Error probing SMB1. <6>i2c i2c-1: nForce2 SMBus adapter at 0x1c40 <4>ACPI: PCI Interrupt Link [AAZA] enabled at IRQ 22 <6>HDA Intel 0000:00:05.0: PCI INT B -> Link[AAZA] -> GSI 22 (level, low) -> IRQ 22 <7>HDA Intel 0000:00:05.0: irq 27 for MSI/MSI-X <7>HDA Intel 0000:00:05.0: setting latency timer to 64 <6>msp3400 0-0040: MSP3410D-C5 found @ 0x80 (bt878 #0 [sw]) <6>msp3400 0-0040: msp3400 supports nicam, mode is autodetect <7>phy0: Selected rate control algorithm 'minstrel' <6>phy0: hwaddr 00:15:af:08:a9:e5, RTL8187vB (default) V1 + rtl8225z2, rfkill mask 2 <6>tuner 0-0042: chip found @ 0x84 (bt878 #0 [sw]) <6>rtl8187: Customer ID is 0x00 <6>Registered led device: rtl8187-phy0::radio <6>Registered led device: rtl8187-phy0::tx <6>Registered led device: rtl8187-phy0::rx <6>rtl8187: wireless switch is on <6>usbcore: registered new interface driver rtl8187 <6>tda9887 0-0042: creating new instance <6>tda9887 0-0042: tda988[5/6/7] found <6>tuner 0-0061: chip found @ 0xc2 (bt878 #0 [sw]) <6>tuner-simple 0-0061: creating new instance <6>tuner-simple 0-0061: type set to 5 (Philips PAL_BG (FI1216 and compatibles)) <6>bttv0: registered device video0 <6>bttv0: registered device vbi0 <6>bttv0: registered device radio0 <6>bttv0: PLL: 28636363 => 35468950 .. ok <7>ieee1394: Host added: ID:BUS[0-00:1023] GUID[0011d80000f3d0c3] <6>hda_codec: AD1988: BIOS auto-probing. <6>input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:05.0/input/input5 <4>ACPI: PCI Interrupt Link [AIGP] enabled at IRQ 23 <6>nouveau 0000:00:0d.0: PCI INT A -> Link[AIGP] -> GSI 23 (level, low) -> IRQ 23 <7>nouveau 0000:00:0d.0: setting latency timer to 64 <6>[drm] nouveau 0000:00:0d.0: Detected an NV40 generation card (0x04c000a2) <6>[drm] nouveau 0000:00:0d.0: Attempting to load BIOS image from PROM <5>[drm] nouveau 0000:00:0d.0: ... BIOS signature not found <6>[drm] nouveau 0000:00:0d.0: Attempting to load BIOS image from PRAMIN <6>[drm] nouveau 0000:00:0d.0: ... appears to be valid <6>[drm] nouveau 0000:00:0d.0: BIT BIOS found <6>[drm] nouveau 0000:00:0d.0: Bios version 05.61.32.14 <4>[drm] nouveau 0000:00:0d.0: TMDS table script pointers not stubbed <6>[drm] nouveau 0000:00:0d.0: BIT table 'd' not found <6>[drm] nouveau 0000:00:0d.0: Found Display Configuration Block version 3.0 <6>[drm] nouveau 0000:00:0d.0: DCB connector table: VHER 0x30 5 10 2 <6>[drm] nouveau 0000:00:0d.0: 0: 0x00000000: type 0x00 idx 0 tag 0xff <5>[drm] nouveau 0000:00:0d.0: Raw DCB entry 0: 01000310 00000023 <5>[drm] nouveau 0000:00:0d.0: Raw DCB entry 1: 00110204 974f0000 <6>[drm] nouveau 0000:00:0d.0: Parsing VBIOS init table 0 at offset 0xDA6D <3>[drm] nouveau 0000:00:0d.0: ======= misaligned reg 0x0060081D ======= <3>[drm] nouveau 0000:00:0d.0: ======= misaligned reg 0x0060081D ======= <6>[drm] nouveau 0000:00:0d.0: Parsing VBIOS init table 1 at offset 0xDBC4 <6>[drm] nouveau 0000:00:0d.0: Parsing VBIOS init table 2 at offset 0xDBC5 <6>[drm] nouveau 0000:00:0d.0: Parsing VBIOS init table 3 at offset 0xDD47 <6>[drm] nouveau 0000:00:0d.0: Parsing VBIOS init table 4 at offset 0xDD90 <6>[TTM] Zone kernel: Available graphics memory: 397228 kiB. <6>[TTM] Zone highmem: Available graphics memory: 2705776 kiB. <6>[drm] nouveau 0000:00:0d.0: 256 MiB VRAM <6>[drm] nouveau 0000:00:0d.0: 64 MiB GART (aperture) <6>[drm] nouveau 0000:00:0d.0: Allocating FIFO number 0 <6>[drm] nouveau 0000:00:0d.0: nouveau_channel_alloc: initialised FIFO 0 <6>[drm] nouveau 0000:00:0d.0: Initial CRTC_OWNER is 0 <4>[drm] nouveau 0000:00:0d.0: DCB type 4 not known <6>[drm] nouveau 0000:00:0d.0: Detected a VGA connector <6>[drm] nouveau 0000:00:0d.0: Setting dpms mode 3 on vga encoder (output 0) <6>nouveau-0000:00:0d.0-1: Test OK <6>No connectors reported connected with modes <6>[drm] Initialized nouveau 0.0.15 20090420 for 0000:00:0d.0 on minor 0 <6>Adding 5245148k swap on /dev/sda5. Priority:-1 extents:1 across:5245148k <6>device-mapper: uevent: version 1.0.3 <6>device-mapper: ioctl: 4.16.0-ioctl (2009-11-05) initialised: dm-devel-H+wXaHxf7aLQT0dZR+AlfA@public.gmane.org <6>loop: module loaded <6>kjournald starting. Commit interval 5 seconds <6>EXT3-fs (sda7): using internal journal <6>EXT3-fs (sda7): mounted filesystem with writeback data mode <6>fuse init (API version 7.13) <5>scsi 10:0:0:0: Direct-Access Generic- Compact Flash 1.00 PQ: 0 ANSI: 0 CCS <5>scsi 10:0:0:1: Direct-Access Generic- SM/xD-Picture 1.00 PQ: 0 ANSI: 0 CCS <5>scsi 10:0:0:2: Direct-Access Generic- SD/MMC 1.00 PQ: 0 ANSI: 0 CCS <5>scsi 10:0:0:3: Direct-Access Generic- MS/MS-Pro 1.00 PQ: 0 ANSI: 0 CCS <5>sd 10:0:0:0: Attached scsi generic sg2 type 0 <5>sd 10:0:0:1: Attached scsi generic sg3 type 0 <5>sd 10:0:0:2: Attached scsi generic sg4 type 0 <5>sd 10:0:0:3: Attached scsi generic sg5 type 0 <5>sd 10:0:0:0: [sdb] Attached SCSI removable disk <5>sd 10:0:0:2: [sdd] Attached SCSI removable disk <5>sd 10:0:0:1: [sdc] Attached SCSI removable disk <5>sd 10:0:0:3: [sde] Attached SCSI removable disk Kernel logging (ksyslog) stopped. Kernel log daemon terminating. Boot logging started on /dev/tty1(/dev/console) at Sat Feb 27 11:34:35 2010 Trying manual resume from /dev/sda5 Invoking userspace resume from /dev/sda5 resume: libgcrypt version: 1.4.1 Trying manual resume from /dev/sda5 Invoking in-kernel resume from /dev/sda5 Waiting for device /dev/disk/by-id/ata-WDC_WD6401AALS-00L3B2_WD-WMASY7431406-part6 to appear: ok showconsole: Warning: the ioctl TIOCGDEV is not known by the kernel fsck 1.41.1 (01-Sep-2008) [/sbin/fsck.ext3 (1) -- /] fsck.ext3 -a -C0 /dev/disk/by-id/ata-WDC_WD6401AALS-00L3B2_WD-WMASY7431406-part6 /dev/disk/by-id/ata-WDC_WD6401AALS-00L3B2_WD-WMASY7431406-part6: clean, 891368/6553600 files, 11213743/26214055 blocks fsck succeeded. Mounting root device read-write. Mounting root /dev/disk/by-id/ata-WDC_WD6401AALS-00L3B2_WD-WMASY7431406-part6 mount -o rw,acl,user_xattr -t ext3 /dev/disk/by-id/ata-WDC_WD6401AALS-00L3B2_WD-WMASY7431406-part6 /root Boot logging started on /dev/tty1(/dev/console) at Sat Feb 27 11:34:45 2010 Master Resource Control: previous runlevel: N, switching to runlevel: 5 startproc: execve (/sbin/acpid) [ /sbin/acpid ], [ CONSOLE=/dev/console ROOTFS_FSTYPE=ext3 SHELL=/bin/sh TERM=linux ROOTFS_FSCK=0 LC_ALL=POSIX INIT_VERSION=sysvinit-2.86 REDIRECT=/dev/tty1 COLUMNS=160 PATH=/bin:/sbin:/usr/bin:/usr/sbin vga=0x31B DO_CONFIRM= RUNLEVEL=5 PWD=/ SPLASHCFG= PREVLEVEL=N LINES=64 HOME=/ SHLVL=2 splash=silent SPLASH=no ROOTFS_BLKDEV=/dev/disk/by-id/ata-WDC_WD6401AALS-00L3B2_WD-WMASY7431406-part6 _=/sbin/startproc DAEMON=/sbin/acpid ] acpid: starting up acpid: 2 rules loaded Starting acpid done Initializing random number generatordone startproc: execve (/sbin/syslog-ng) [ /sbin/syslog-ng ], [ CONSOLE=/dev/console ROOTFS_FSTYPE=ext3 TERM=linux SHELL=/bin/sh ROOTFS_FSCK=0 LC_ALL=POSIX INIT_VERSION=sysvinit-2.86 REDIRECT=/dev/tty1 COLUMNS=160 PATH=/bin:/sbin:/usr/bin:/usr/sbin DO_CONFIRM= vga=0x31B RUNLEVEL=5 SPLASHCFG= PWD=/ PREVLEVEL=N LINES=64 SHLVL=2 HOME=/ SPLASH=no splash=silent ROOTFS_BLKDEV=/dev/disk/by-id/ata-WDC_WD6401AALS-00L3B2_WD-WMASY7431406-part6 _=/sbin/startproc DAEMON=/sbin/syslog-ng ] startproc: execve (/sbin/klogd) [ /sbin/klogd -c 1 -x ], [ CONSOLE=/dev/console ROOTFS_FSTYPE=ext3 TERM=linux SHELL=/bin/sh ROOTFS_FSCK=0 LC_ALL=POSIX INIT_VERSION=sysvinit-2.86 REDIRECT=/dev/tty1 COLUMNS=160 PATH=/bin:/sbin:/usr/bin:/usr/sbin DO_CONFIRM= vga=0x31B RUNLEVEL=5 SPLASHCFG= PWD=/ PREVLEVEL=N LINES=64 SHLVL=2 HOME=/ SPLASH=no splash=silent ROOTFS_BLKDEV=/dev/disk/by-id/ata-WDC_WD6401AALS-00L3B2_WD-WMASY7431406-part6 _=/sbin/startproc DAEMON=/sbin/klogd ] Starting syslog servicesdone Starting D-Bus daemondone Setting up ISDN card contr0 Asus PCI (CCD HFC)done Loading Driver contr0 hisaxdone Starting Firewall Initialization (phase 1 of 2) done Setting up (localfs) network interfaces: lo lo IP address: 127.0.0.1/8 IP address: 127.0.0.2/8 lo done eth0 device: nVidia Corporation MCP61 Ethernet (rev a2) No configuration found for eth0 eth0 unusedSetting up service (localfs) network . . . . . . . . . .done Loading CPUFreq modulesdone Starting HAL daemondone Starting service kdmstartproc: execve (/usr/bin/kdm) [ /usr/bin/kdm ], [ CONSOLE=/dev/console ROOTFS_FSTYPE=ext3 TERM=linux SHELL=/bin/sh ROOTFS_FSCK=0 INIT_VERSION=sysvinit-2.86 KDEROOTHOME=/root/.kdm REDIRECT=/dev/tty1 COLUMNS=160 PATH=/bin:/sbin:/usr/bin:/usr/sbin DO_CONFIRM= vga=0x31B RUNLEVEL=5 SPLASHCFG= PWD=/ LANG=de_DE.UTF-8 PREVLEVEL=N LINES=64 QT_SYSTEM_DIR=/usr/share/desktop-data SHLVL=2 HOME=/ XCURSOR_THEME=DMZ WINDOWMANAGER=/usr/bin/startkde SPLASH=no splash=silent ROOTFS_BLKDEV=/dev/disk/by-id/ata-WDC_WD6401AALS-00L3B2_WD-WMASY7431406-part6 _=/sbin/startproc DAEMON=/usr/bin/kdm ] done Starting rpcbind startproc: execve (/sbin/rpcbind) [ /sbin/rpcbind ], [ CONSOLE=/dev/console ROOTFS_FSTYPE=ext3 SHELL=/bin/sh TERM=linux ROOTFS_FSCK=0 LC_ALL=POSIX INIT_VERSION=sysvinit-2.86 REDIRECT=/dev/tty1 COLUMNS=160 PATH=/bin:/sbin:/usr/bin:/usr/sbin vga=0x31B DO_CONFIRM= RUNLEVEL=5 PWD=/ SPLASHCFG= PREVLEVEL=N LINES=64 HOME=/ SHLVL=2 splash=silent SPLASH=no ROOTFS_BLKDEV=/dev/disk/by-id/ata-WDC_WD6401AALS-00L3B2_WD-WMASY7431406-part6 _=/sbin/startproc DAEMON=/sbin/rpcbind ] done Not starting NFS client services - no NFS found in /etc/fstab:unused Mount CIFS File Systems unused Loading console font lat9w-16.psfu -m trivial G0:loadable doneLoading keymap assuming iso-8859-15 euro Loading /usr/share/kbd/keymaps/i386/qwertz/de-latin1-nodeadkeys.map.gz doneLoading compose table latin1.adddone Start Unicode mode donecheckproc: /usr/bin/kdm 2943 Starting auditd startproc: execve (/sbin/auditd) [ /sbin/auditd -s disable ], [ CONSOLE=/dev/console ROOTFS_FSTYPE=ext3 SHELL=/bin/sh TERM=linux ROOTFS_FSCK=0 LC_ALL=POSIX INIT_VERSION=sysvinit-2.86 REDIRECT=/dev/tty1 COLUMNS=160 PATH=/bin:/sbin:/usr/bin:/usr/sbin vga=0x31B DO_CONFIRM= RUNLEVEL=5 PWD=/ SPLASHCFG= PREVLEVEL=N LINES=64 HOME=/ SHLVL=2 splash=silent SPLASH=no ROOTFS_BLKDEV=/dev/disk/by-id/ata-WDC_WD6401AALS-00L3B2_WD-WMASY7431406-part6 _=/sbin/startproc DAEMON=/sbin/auditd ] done Starting Avahi daemon done Starting cupsdstartproc: execve (/usr/sbin/cupsd) [ /usr/sbin/cupsd ], [ CONSOLE=/dev/console ROOTFS_FSTYPE=ext3 SHELL=/bin/sh TERM=linux ROOTFS_FSCK=0 LC_ALL=POSIX INIT_VERSION=sysvinit-2.86 REDIRECT=/dev/tty1 COLUMNS=160 PATH=/bin:/sbin:/usr/bin:/usr/sbin vga=0x31B DO_CONFIRM= RUNLEVEL=5 PWD=/ SPLASHCFG= PREVLEVEL=N LINES=64 HOME=/ SHLVL=2 splash=silent SPLASH=no ROOTFS_BLKDEV=/dev/disk/by-id/ata-WDC_WD6401AALS-00L3B2_WD-WMASY7431406-part6 _=/sbin/startproc DAEMON=/usr/sbin/cupsd ] done startproc: execve (/usr/sbin/nscd) [ /usr/sbin/nscd ], [ CONSOLE=/dev/console ROOTFS_FSTYPE=ext3 SHELL=/bin/sh TERM=linux ROOTFS_FSCK=0 LC_ALL=POSIX INIT_VERSION=sysvinit-2.86 REDIRECT=/dev/tty1 COLUMNS=160 PATH=/bin:/sbin:/usr/bin:/usr/sbin vga=0x31B DO_CONFIRM= RUNLEVEL=5 PWD=/ SPLASHCFG= PREVLEVEL=N LINES=64 HOME=/ SHLVL=2 splash=silent SPLASH=no ROOTFS_BLKDEV=/dev/disk/by-id/ata-WDC_WD6401AALS-00L3B2_WD-WMASY7431406-part6 _=/sbin/startproc DAEMON=/usr/sbin/nscd ] startproc: execve (/usr/bin/ksysguardd) [ /usr/bin/ksysguardd -d ], [ CONSOLE=/dev/console ROOTFS_FSTYPE=ext3 SHELL=/bin/sh TERM=linux ROOTFS_FSCK=0 LC_ALL=POSIX INIT_VERSION=sysvinit-2.86 REDIRECT=/dev/tty1 COLUMNS=160 PATH=/bin:/sbin:/usr/bin:/usr/sbin vga=0x31B DO_CONFIRM= RUNLEVEL=5 PWD=/ SPLASHCFG= PREVLEVEL=N LINES=64 HOME=/ SHLVL=2 splash=silent SPLASH=no ROOTFS_BLKDEV=/dev/disk/by-id/ata-WDC_WD6401AALS-00L3B2_WD-WMASY7431406-part6 _=/sbin/startproc DAEMON=/usr/bin/ksysguardd ] Starting java.binfmt_misc done Starting Name Service Cache Daemondone Starting KDE ksysguard daemon (ksysguardd)done startproc: execve (/usr/sbin/smpppd) [ /usr/sbin/smpppd ], [ CONSOLE=/dev/console ROOTFS_FSTYPE=ext3 SHELL=/bin/sh TERM=linux ROOTFS_FSCK=0 LC_ALL=POSIX INIT_VERSION=sysvinit-2.86 REDIRECT=/dev/tty1 COLUMNS=160 PATH=/bin:/sbin:/usr/bin:/usr/sbin vga=0x31B DO_CONFIRM= RUNLEVEL=5 PWD=/ SPLASHCFG= PREVLEVEL=N LINES=64 HOME=/ SHLVL=2 splash=silent SPLASH=no ROOTFS_BLKDEV=/dev/disk/by-id/ata-WDC_WD6401AALS-00L3B2_WD-WMASY7431406-part6 _=/sbin/startproc DAEMON=/usr/sbin/smpppd ] ksysguardd 4 (c) 1999, 2000, 2001, 2002 Chris Schlaeger (c) 2001 Tobias Koenig (c) 2006-2008 Greg Martyn This program is part of the KDE Project and licensed under the GNU GPL version 2. See http://www.kde.org for details. Starting SMPPPDdone Starting smartd done startproc: execve (/usr/sbin/hddtemp) [ /usr/sbin/hddtemp -d -f /etc/hddtemp.db -p 7634 /dev/sda ], [ CONSOLE=/dev/console ROOTFS_FSTYPE=ext3 SHELL=/bin/sh TERM=linux ROOTFS_FSCK=0 LC_ALL=POSIX INIT_VERSION=sysvinit-2.86 REDIRECT=/dev/tty1 COLUMNS=160 PATH=/bin:/sbin:/usr/bin:/usr/sbin vga=0x31B DO_CONFIRM= RUNLEVEL=5 PWD=/ SPLASHCFG= PREVLEVEL=N LINES=64 HOME=/ SHLVL=2 splash=silent SPLASH=no ROOTFS_BLKDEV=/dev/disk/by-id/ata-WDC_WD6401AALS-00L3B2_WD-WMASY7431406-part6 _=/sbin/startproc DAEMON=/usr/sbin/hddtemp ] Starting hddtemp daemon for /dev/sdadone startproc: execve (/usr/sbin/sshd) [ /usr/sbin/sshd -o PidFile=/var/run/sshd.init.pid ], [ CONSOLE=/dev/console ROOTFS_FSTYPE=ext3 SHELL=/bin/sh TERM=linux ROOTFS_FSCK=0 LC_ALL=POSIX INIT_VERSION=sysvinit-2.86 REDIRECT=/dev/tty1 COLUMNS=160 PATH=/bin:/sbin:/usr/bin:/usr/sbin vga=0x31B DO_CONFIRM= RUNLEVEL=5 PWD=/ SPLASHCFG= PREVLEVEL=N LINES=64 HOME=/ SHLVL=2 splash=silent SPLASH=no ROOTFS_BLKDEV=/dev/disk/by-id/ata-WDC_WD6401AALS-00L3B2_WD-WMASY7431406-part6 _=/sbin/startproc DAEMON=/usr/sbin/sshd ] Setting up (remotefs) network interfaces: wlan0 No configuration found for wlan0 wlan0 unused ippp0 ippp0 Startmode is 'manual' ippp0 skippedSetting up service (remotefs) network . . . . . . . . . .done Starting SSH daemondone Starting mail service (Postfix)done startproc: execve (/usr/sbin/cron) [ /usr/sbin/cron ], [ CONSOLE=/dev/console ROOTFS_FSTYPE=ext3 SHELL=/bin/sh TERM=linux ROOTFS_FSCK=0 LC_ALL=POSIX INIT_VERSION=sysvinit-2.86 REDIRECT=/dev/tty1 COLUMNS=160 PATH=/bin:/sbin:/usr/bin:/usr/sbin vga=0x31B DO_CONFIRM= RUNLEVEL=5 PWD=/ SPLASHCFG= PREVLEVEL=N LINES=64 HOME=/ SHLVL=2 splash=silent SPLASH=no ROOTFS_BLKDEV=/dev/disk/by-id/ata-WDC_WD6401AALS-00L3B2_WD-WMASY7431406-part6 _=/sbin/startproc DAEMON=/usr/sbin/cron ] Starting CRON daemondone done Starting Firewall Initialization (phase 2 of 2) done Master Resource Control: runlevel 5 has been reached Skipped services in runlevel 5: nfs smbfs splash killproc: kill(2221,3) Boot logging started on /dev/tty1(/dev/console) at Sat Feb 27 11:36:06 2010 Master Resource Control: previous runlevel: 5, switching to runlevel: 0 Shutting down the Firewall skipped killproc: kill(3146,15) killproc: kill(3673,15) killproc: kill(3259,15) killproc: kill(3412,15) killproc: kill(3478,15) Shutting down CRON daemondone Shutting down cupsddone Shutting down KDE ksysguard daemon (ksysguardd)done Shutting down hddtemp daemon for /dev/sdadone killproc: kill(2943,15) Shutting down smartd done Shutting down java.binfmt_misc done killproc: kill(3647,15) Shutting down service kdmdone killproc: kill(3619,15) killproc: kill(3111,15) Shutting down mail service (Postfix)done Shutting down Avahi daemon done Shutting down SSH daemondone /etc/init.d/kbd stopdone killproc: kill(2273,15) Shutting down auditd done killproc: kill(3221,15) Saving random seeddone done Shutting down service kdmdone Shutting down acpid done Shutting down Name Service Cache Daemondone Shutting down SMPPPDdone Shutting down (remotefs) network interfaces: wlan0 No configuration found for wlan0 Nevertheless the interface will be shut down. wlan0 doneUmount SMB/ CIFS File Systems done killproc: kill(2371,15) Shutting down NFS client services:done killproc: kill(2972,15) Shutting down rpcbind done killproc: kill(2300,15) killproc: kill(2316,15) Shutting down HAL daemondone Shutting down syslog servicesdone Shutting down (localfs) network interfaces: eth0 device: nVidia Corporation MCP61 Ethernet (rev a2) No configuration found for eth0 Nevertheless the interface will be shut down. eth0 doneShutting down service (localfs) network . . . . . . . . .done killproc: kill(2326,15) Stopping ISDN done Shutting down D-Bus daemondone killproc: kill(3826,3) halt start --------------070909030201010104010100 Content-Type: text/plain; charset="us-ascii" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit Content-Disposition: inline _______________________________________________ Nouveau mailing list Nouveau-PD4FTy7X32lNgt0PjOBp9y5qC8QIuHrW@public.gmane.org http://lists.freedesktop.org/mailman/listinfo/nouveau --------------070909030201010104010100--