From: "Németh Márton" <nm127@freemail.hu>
To: Grant Likely <grant.likely@secretlab.ca>
Cc: linuxppc-dev Development <linuxppc-dev@ozlabs.org>,
David Gibson <david@gibson.dropbear.id.au>
Subject: Re: Freescale MPC5554 device tree (was: cross-compiling Linux for PowerPC e200 core?)
Date: Sat, 13 Mar 2010 12:59:06 +0100 [thread overview]
Message-ID: <4B9B7E0A.8090703@freemail.hu> (raw)
In-Reply-To: <fa686aa41003120414j48825e7cr952336703fe03b04@mail.gmail.com>
Hi,
here is a version with modified cpu node, xbar ranges and added interrupt sources.
Please send comments.
Regards,
Márton Németh
---
From: Márton Németh <nm127@freemail.hu>
Add device tree for Freescale MPC5554.
Signed-off-by: Márton Németh <nm127@freemail.hu>
---
diff -uprN linux-2.6.33.orig/arch/powerpc/boot/dts/mpc5554.dts linux/arch/powerpc/boot/dts/mpc5554.dts
--- linux-2.6.33.orig/arch/powerpc/boot/dts/mpc5554.dts 1970-01-01 01:00:00.000000000 +0100
+++ linux/arch/powerpc/boot/dts/mpc5554.dts 2010-03-13 12:52:32.000000000 +0100
@@ -0,0 +1,473 @@
+/*
+ * Freescale MPC5554 Device Tree Source
+ *
+ * Based on MPC5553/5554 Microcontroller Reference Manual, Rev. 4.0, 04/2007
+ * http://www.freescale.com/files/32bit/doc/ref_manual/MPC5553_MPC5554_RM.pdf
+ * - Block Diagram: page 1-3, Figure 1-1
+ * - Memory Map: page 1-21, Table 1-2
+ * - Interrupt Request Sources: page 10-16, Table 10-9
+ *
+ * Copyright 2010 Márton Németh
+ * Márton Németh <nm127@freemail.hu>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ */
+
+/dts-v1/;
+
+/ {
+ model = "MPC5554";
+ compatible = "fsl,MPC5554EVB"; // Freescale MPC5554 Evaluation Board
+ #address-cells = <1>;
+ #size-cells = <1>;
+ interrupt-parent = <&intc>;
+
+ cpus {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ cpu@0 {
+ device_type = "cpu";
+ compatible = "PowerPC,5554", "fsl,mpc5554-e200z6", "fsl,powerpc-e200z6";
+ reg = <0>;
+ d-cache-line-size = <32>;
+ i-cache-line-size = <32>;
+ d-cache-size = <0x8000>; // L1, 32KiB
+ i-cache-size = <0x8000>; // L1, 32KiB
+ timebase-frequency = <0>; // from bootloader
+ bus-frequency = <0>; // from bootloader
+ clock-frequency = <0>; // from bootloader
+ };
+ };
+
+ memory@40000000 {
+ device_type = "memory";
+ reg = <0x40000000 0x10000>; // 32KiB internal SRAM
+ };
+
+ xbar@fff04000 { // System Bus Crossbar Switch (XBAR)
+ compatible = "fsl,mpc5554-xbar";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ // The full memory range is covered by XBAR
+ ranges;
+ reg = <0xfff04000 0x4000>;
+
+ flash@0 { // read-only FLASH
+ compatible = "fsl,mpc5554-flash";
+ reg = <0x00000000 0x200000>; // 2MiB internal FLASH
+ };
+
+ bridge@c3f00000 {
+ compatible = "fsl,mpc5554-pbridge-a";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0 0xc0000000 0x20000000>;
+ reg = <0xc3f00000 0x4000>;
+
+ fmpll@3f80000 { // Frequency Modulated PLL
+ compatible = "fsl,mpc5554-fmpll";
+ reg = <0x03f80000 0x4000>;
+ interrupts = <43 1 // Loss of Clock
+ 44 1>; // Loss of Lock
+ };
+
+ flashconfig@3f88000 { // Flash Configuration
+ compatible = "fsl,mpc5554-flashconfig";
+ reg = <0x03f88000 0x4000>;
+ };
+
+ siu@3f89000 { // System Integration Unit
+ compatible = "fsl,mpc5554-siu";
+ reg = <0x03f90000 0x4000>;
+ interrupts = <45 1 // External Interrupt Overrun 0-15
+ 46 1 // External Interrupt 0
+ 47 1 // External Interrupt 1
+ 48 1 // External Interrupt 2
+ 49 1 // External Interrupt 3
+ 50 1>; // External Interrupt 4-15
+ };
+
+ emios@3fa0000 { // Modular Timer System
+ compatible = "fsl,mpc5554-emios";
+ reg = <0x03fa0000 0x4000>;
+ interrupts = <51 1 // Channel 0
+ 52 1 // Channel 1
+ 53 1 // Channel 2
+ 54 1 // Channel 3
+ 55 1 // Channel 4
+ 56 1 // Channel 5
+ 57 1 // Channel 6
+ 58 1 // Channel 7
+ 59 1 // Channel 8
+ 60 1 // Channel 9
+ 61 1 // Channel 10
+ 62 1 // Channel 11
+ 63 1 // Channel 12
+ 64 1 // Channel 13
+ 65 1 // Channel 14
+ 66 1 // Channel 15
+ 202 1 // Channel 16
+ 203 1 // Channel 17
+ 204 1 // Channel 18
+ 205 1 // Channel 19
+ 206 1 // Channel 20
+ 207 1 // Channel 21
+ 208 1 // Channel 22
+ 209 1>; // Channel 23
+ };
+
+ etpu@3fc0000 { // Enhanced Time Processing Unit
+ compatible = "fsl,mpc5554-etpu";
+ reg = <0x03fc0000 0x4000>;
+ interrupts = <67 1 // Global Exception
+ 68 1 // A Channel 0
+ 69 1 // A Channel 1
+ 70 1 // A Channel 2
+ 71 1 // A Channel 3
+ 72 1 // A Channel 4
+ 73 1 // A Channel 5
+ 74 1 // A Channel 6
+ 75 1 // A Channel 7
+ 76 1 // A Channel 8
+ 77 1 // A Channel 9
+ 78 1 // A Channel 10
+ 79 1 // A Channel 11
+ 80 1 // A Channel 12
+ 81 1 // A Channel 13
+ 82 1 // A Channel 14
+ 83 1 // A Channel 15
+ 84 1 // A Channel 16
+ 85 1 // A Channel 17
+ 86 1 // A Channel 18
+ 87 1 // A Channel 19
+ 88 1 // A Channel 20
+ 89 1 // A Channel 21
+ 90 1 // A Channel 22
+ 91 1 // A Channel 23
+ 92 1 // A Channel 24
+ 93 1 // A Channel 25
+ 94 1 // A Channel 26
+ 95 1 // A Channel 27
+ 96 1 // A Channel 28
+ 97 1 // A Channel 29
+ 98 1 // A Channel 30
+ 99 1 // A Channel 31
+ 243 1 // B Channel 0
+ 244 1 // B Channel 1
+ 245 1 // B Channel 2
+ 246 1 // B Channel 3
+ 247 1 // B Channel 4
+ 248 1 // B Channel 5
+ 249 1 // B Channel 6
+ 250 1 // B Channel 7
+ 251 1 // B Channel 8
+ 252 1 // B Channel 9
+ 253 1 // B Channel 10
+ 254 1 // B Channel 11
+ 255 1 // B Channel 12
+ 256 1 // B Channel 13
+ 257 1 // B Channel 14
+ 258 1 // B Channel 15
+ 259 1 // B Channel 16
+ 260 1 // B Channel 17
+ 261 1 // B Channel 18
+ 262 1 // B Channel 19
+ 263 1 // B Channel 20
+ 264 1 // B Channel 21
+ 265 1 // B Channel 22
+ 266 1 // B Channel 23
+ 267 1 // B Channel 24
+ 268 1 // B Channel 25
+ 269 1 // B Channel 26
+ 270 1 // B Channel 27
+ 271 1 // B Channel 28
+ 272 1 // B Channel 29
+ 273 1 // B Channel 30
+ 274 1>; // B Channel 31
+ };
+
+ etpudata@3fc8000 { // eTPU Shared Data Memory (Parameter RAM)
+ compatible = "fsl,mpc5554-etpudata";
+ reg = <0x03fc8000 0x4000>;
+ };
+
+ etpudata@3fcc000 { // eTPU Shared Data Memory (Parameter RAM) mirror
+ compatible = "fsl,mpc5554-etpudata";
+ reg = <0x03fcc000 0x4000>;
+ };
+
+ etpucode@3fd0000 { // eTPU Shared Code RAM
+ compatible = "fsl,mpc5554-etpucode";
+ reg = <0x03fd0000 0x4000>;
+ };
+ };
+
+ bridge@fff00000 {
+ compatible = "fsl,mpc5554-pbridge-b";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0 0xe0000000 0x20000000>;
+ reg = <0xfff00000 0x4000>;
+
+ ecsm@fff40000 { // Error Correction Status Module (ECSM)
+ compatible = "fsl,mpc5554-ecsm";
+ reg = <0xfff40000 0x4000>;
+ interrupts = <8 1 // Software Watchdog Interrupt
+ 9 1>; // Combined: Internal SRAM Non-Correctable Error, Flash Non-Correctable Error
+ };
+
+ edma@fff44000 { // Enhanced DMA Controller (eDMA)
+ compatible = "fsl,mpc5554-edma";
+ reg = <0xfff44000 0x4000>;
+ interrupts = <10 1 // Channel Error 0-31
+ 11 1 // Channel 0
+ 12 1 // Channel 1
+ 13 1 // Channel 2
+ 14 1 // Channel 3
+ 15 1 // Channel 4
+ 16 1 // Channel 5
+ 17 1 // Channel 6
+ 18 1 // Channel 7
+ 19 1 // Channel 8
+ 20 1 // Channel 9
+ 21 1 // Channel 10
+ 22 1 // Channel 11
+ 23 1 // Channel 12
+ 24 1 // Channel 13
+ 25 1 // Channel 14
+ 26 1 // Channel 15
+ 27 1 // Channel 16
+ 28 1 // Channel 17
+ 29 1 // Channel 18
+ 30 1 // Channel 19
+ 31 1 // Channel 20
+ 32 1 // Channel 21
+ 33 1 // Channel 22
+ 34 1 // Channel 23
+ 35 1 // Channel 24
+ 36 1 // Channel 25
+ 37 1 // Channel 26
+ 38 1 // Channel 27
+ 39 1 // Channel 28
+ 40 1 // Channel 29
+ 41 1 // Channel 30
+ 42 1 // Channel 31
+ 210 1 // Channel Error 32-63
+ 211 1 // Channel 32
+ 212 1 // Channel 33
+ 213 1 // Channel 34
+ 214 1 // Channel 35
+ 215 1 // Channel 36
+ 216 1 // Channel 37
+ 217 1 // Channel 38
+ 218 1 // Channel 39
+ 219 1 // Channel 40
+ 220 1 // Channel 41
+ 221 1 // Channel 42
+ 222 1 // Channel 43
+ 223 1 // Channel 44
+ 224 1 // Channel 45
+ 225 1 // Channel 46
+ 226 1 // Channel 47
+ 227 1 // Channel 48
+ 228 1 // Channel 49
+ 229 1 // Channel 50
+ 230 1 // Channel 51
+ 231 1 // Channel 52
+ 232 1 // Channel 53
+ 233 1 // Channel 54
+ 234 1 // Channel 55
+ 235 1 // Channel 56
+ 236 1 // Channel 57
+ 237 1 // Channel 58
+ 238 1 // Channel 59
+ 239 1 // Channel 60
+ 240 1 // Channel 61
+ 241 1 // Channel 62
+ 242 1>; // Channel 63
+ };
+
+ intc: intc@fff48000 { // Interrupt Controller (INTC)
+ compatible = "fsl,mpc5554-intc";
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ reg = <0xfff48000 0x4000>;
+ };
+
+ eqadc@fff80000 { // Enhanced Queued Analog-to-Digital Converter (eQADC)
+ compatible = "fsl,mpc5554-eqacd";
+ reg = <0xfff80000 0x4000>;
+ interrupts = <100 1 // Combined: Trigger Overrun, Receive FIFO Overflow, Command FIFO Underflow
+ 101 1 // Command FIFO 0 Non-Coherency
+ 102 1 // Command FIFO 0 Pause
+ 103 1 // Command FIFO 0 End of Queue
+ 104 1 // Command FIFO 0 Fill
+ 105 1 // Command FIFO 0 Drain
+ 106 1 // Command FIFO 1 Non-Coherency
+ 107 1 // Command FIFO 1 Pause
+ 108 1 // Command FIFO 1 End of Queue
+ 109 1 // Command FIFO 1 Fill
+ 111 1 // Command FIFO 1 Drain
+ 111 1 // Command FIFO 2 Non-Coherency
+ 112 1 // Command FIFO 2 Pause
+ 113 1 // Command FIFO 2 End of Queue
+ 114 1 // Command FIFO 2 Fill
+ 115 1 // Command FIFO 2 Drain
+ 116 1 // Command FIFO 3 Non-Coherency
+ 117 1 // Command FIFO 3 Pause
+ 118 1 // Command FIFO 3 End of Queue
+ 119 1 // Command FIFO 3 Fill
+ 120 1 // Command FIFO 3 Drain
+ 121 1 // Command FIFO 4 Non-Coherency
+ 122 1 // Command FIFO 4 Pause
+ 123 1 // Command FIFO 4 End of Queue
+ 124 1 // Command FIFO 4 Fill
+ 125 1 // Command FIFO 4 Drain
+ 126 1 // Command FIFO 5 Non-Coherency
+ 127 1 // Command FIFO 5 Pause
+ 128 1 // Command FIFO 5 End of Queue
+ 129 1 // Command FIFO 5 Fill
+ 130 1>; // Command FIFO 5 Drain
+ };
+
+ dspi@fff90000 { // Deserial Serial Peripheral Interface (DSPI_A)
+ compatible = "fsl,mpc5554-dspi";
+ reg = <0xfff90000 0x4000>;
+ interrupts = <275 1 // Combined: Transmit FIFO Underflow, Receive FIFO Overflow
+ 276 1 // Transmit FIFO End of Queue
+ 277 1 // Transmit FIFO Fill Flag
+ 278 1 // Transfer Complete
+ 279 1>; // Receive FIFO Drain
+ };
+
+ dspi@fff94000 { // Deserial Serial Peripheral Interface (DSPI_B)
+ compatible = "fsl,mpc5554-dspi";
+ reg = <0xfff94000 0x4000>;
+ interrupts = <131 1 // Combined: Transmit FIFO Underflow, Receive FIFO Overflow
+ 132 1 // Transmit FIFO End of Queue
+ 133 1 // Transmit FIFO Fill Flag
+ 134 1 // Transfer Complete
+ 135 1>; // Receive FIFO Drain
+ };
+
+ dspi@fff98000 { // Deserial Serial Peripheral Interface (DSPI_C)
+ compatible = "fsl,mpc5554-dspi";
+ reg = <0xfff98000 0x4000>;
+ interrupts = <136 1 // Combined: Transmit FIFO Underflow, Receive FIFO Overflow
+ 137 1 // Transmit FIFO End of Queue
+ 138 1 // Transmit FIFO Fill Flag
+ 139 1 // Transfer Complete
+ 140 1>; // Receive FIFO Drain
+ };
+
+ dspi@fff9c000 { // Deserial Serial Peripheral Interface (DSPI_D)
+ compatible = "fsl,mpc5554-dspi";
+ reg = <0xfff9c000 0x4000>;
+ interrupts = <141 1 // Combined: Transmit FIFO Underflow, Receive FIFO Overflow
+ 142 1 // Transmit FIFO End of Queue
+ 143 1 // Transmit FIFO Fill Flag
+ 144 1 // Transfer Complete
+ 145 1>; // Receive FIFO Drain
+ };
+
+ esci@fffb0000 { // Serial Communications Interface (SCI_A)
+ compatible = "fsl,mpc5554-esci";
+ reg = <0xfffb0000 0x4000>;
+ interrupts = <146 1>; // Combined request for all SCI_A interrupts
+ };
+
+ esci@fffb4000 { // Serial Communications Interface (SCI_B)
+ compatible = "fsl,mpc5554-esci";
+ reg = <0xfffb4000 0x4000>;
+ interrupts = <149 1>; // Combined request for all SCI_A interrupts
+ };
+
+ can@fffc0000 { // Controller Area Network (FlexCAN_A)
+ compatible = "fsl,mpc5554-flexcan";
+ reg = <0xfffc0000 0x4000>;
+ interrupts = <152 1 // Bus off
+ 153 1 // Error
+ 155 1 // Buffer 0
+ 156 1 // Buffer 1
+ 157 1 // Buffer 2
+ 158 1 // Buffer 3
+ 159 1 // Buffer 4
+ 160 1 // Buffer 5
+ 161 1 // Buffer 6
+ 162 1 // Buffer 7
+ 163 1 // Buffer 8
+ 164 1 // Buffer 9
+ 165 1 // Buffer 10
+ 166 1 // Buffer 11
+ 167 1 // Buffer 12
+ 168 1 // Buffer 13
+ 169 1 // Buffer 14
+ 170 1 // Buffer 15
+ 171 1 // Buffers 16-31
+ 172 1>; // Buffers 32-63
+ };
+
+ can@fffc4000 { // Controller Area Network (FlexCAN_B)
+ compatible = "fsl,mpc5554-flexcan";
+ reg = <0xfffc4000 0x4000>;
+ interrupts = <280 1 // Bus off
+ 281 1 // Error
+ 283 1 // Buffer 0
+ 284 1 // Buffer 1
+ 285 1 // Buffer 2
+ 286 1 // Buffer 3
+ 287 1 // Buffer 4
+ 288 1 // Buffer 5
+ 289 1 // Buffer 6
+ 290 1 // Buffer 7
+ 291 1 // Buffer 8
+ 292 1 // Buffer 9
+ 293 1 // Buffer 10
+ 294 1 // Buffer 11
+ 295 1 // Buffer 12
+ 296 1 // Buffer 13
+ 297 1 // Buffer 14
+ 298 1 // Buffer 15
+ 299 1 // Buffers 16-31
+ 300 1>; // Buffers 32-63
+ };
+
+ can@fffc8000 { // Controller Area Network (FlexCAN_C)
+ compatible = "fsl,mpc5554-flexcan";
+ reg = <0xfffc8000 0x4000>;
+ interrupts = <173 1 // Bus off
+ 174 1 // Error
+ 176 1 // Buffer 0
+ 177 1 // Buffer 1
+ 178 1 // Buffer 2
+ 179 1 // Buffer 3
+ 180 1 // Buffer 4
+ 181 1 // Buffer 5
+ 182 1 // Buffer 6
+ 183 1 // Buffer 7
+ 184 1 // Buffer 8
+ 185 1 // Buffer 9
+ 186 1 // Buffer 10
+ 187 1 // Buffer 11
+ 188 1 // Buffer 12
+ 189 1 // Buffer 13
+ 190 1 // Buffer 14
+ 191 1 // Buffer 15
+ 192 1 // Buffers 16-31
+ 193 1>; // Buffers 32-63
+ };
+
+ bam@ffffc000 { // Boot Assist Module (BAM)
+ compatible = "fsl,mpc5554-bam";
+ reg = <0xffffc000 0x4000>;
+ };
+
+ };
+
+ };
+
+};
next prev parent reply other threads:[~2010-03-13 11:59 UTC|newest]
Thread overview: 25+ messages / expand[flat|nested] mbox.gz Atom feed top
2010-03-07 6:50 cross-compiling Linux for PowerPC e200 core? Németh Márton
2010-03-08 17:34 ` Grant Likely
2010-03-08 18:44 ` Németh Márton
2010-03-08 19:08 ` Grant Likely
2010-03-09 7:02 ` Németh Márton
2010-03-09 7:35 ` Grant Likely
2010-03-11 6:11 ` Freescale MPC5554 device tree (was: cross-compiling Linux for PowerPC e200 core?) Németh Márton
2010-03-11 6:23 ` David Gibson
2010-03-12 6:26 ` Németh Márton
2010-03-12 12:14 ` Grant Likely
2010-03-12 22:36 ` David Gibson
2010-03-12 23:04 ` Grant Likely
2010-03-13 3:22 ` Segher Boessenkool
2010-03-13 3:21 ` Segher Boessenkool
2010-03-13 11:59 ` Németh Márton [this message]
2010-03-17 18:12 ` Németh Márton
2010-03-17 19:02 ` Grant Likely
2010-03-22 6:28 ` Németh Márton
2010-03-22 14:59 ` Grant Likely
2010-03-23 5:45 ` Németh Márton
2010-03-30 6:54 ` Németh Márton
2010-03-08 17:47 ` cross-compiling Linux for PowerPC e200 core? Segher Boessenkool
2010-03-08 18:49 ` Németh Márton
2010-03-08 20:41 ` Segher Boessenkool
[not found] ` <53452.84.105.60.153.1268080871.squirrel__48847.2990495667$1268080944$gmane$org@gate.crashing.org>
2010-03-09 14:24 ` Detlev Zundel
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=4B9B7E0A.8090703@freemail.hu \
--to=nm127@freemail.hu \
--cc=david@gibson.dropbear.id.au \
--cc=grant.likely@secretlab.ca \
--cc=linuxppc-dev@ozlabs.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.