From: Hamza Ferrag <hferraggreat@gmail.com>
To: linux-media@vger.kernel.org
Subject: TeVii S470 Tunning Issue (Kernel 2.6.27-21)
Date: Tue, 13 Jul 2010 20:41:25 +0200 [thread overview]
Message-ID: <4C3CB355.7070904@gmail.com> (raw)
Hi all,
I am trying to install a 'Tevii S470' card from TeVii technology as
described here http://linuxtv.org/wiki/index.php/TeVii_S470.
My configuration is :
- intel x86 platform
- Kernel 2.6.27-21
- tevii_ds3000.tar.gz (firmware archive from
http://tevii.com/tevii_ds3000.tar.gz ),
- s2-liplianin mercurial sources ( from
http://mercurial.intuxication.org/hg/s2-liplianin)last changes at
05/29/2010,
All work fine i.e drivers/firmware installation after madprobe a right
modules.
# lsmod
Module Size Used by Not tainted
cx23885 82416 0
tveeprom 9348 1 cx23885
btcx_risc 1928 1 cx23885
cx2341x 7748 1 cx23885
ir_common 23936 1 cx23885
videobuf_dma_sg 5060 1 cx23885
ir_core 3596 2 cx23885,ir_common
v4l2_common 8896 2 cx23885,cx2341x
videodev 25376 2 cx23885,v4l2_common
videobuf_dvb 2820 1 cx23885
videobuf_core 8388 3 cx23885,videobuf_dma_sg,videobuf_dvb
lnbp21 1024 0
dvb_core 54832 2 cx23885,videobuf_dvb
ds3000 9668 1
# dmesg
Linux video capture interface: v2.00
cx23885 driver version 0.0.2 loaded
CORE cx23885[0]: subsystem: d470:9022, board: TeVii S470
[card=15,autodetected]
cx23885_dvb_register() allocating 1 frontend(s)
cx23885[0]: cx23885 based dvb card
DS3000 chip version: 0.192 attached.
DVB: registering new adapter (cx23885[0])
DVB: registering adapter 0 frontend 0 (Montage Technology DS3000/TS2020)...
cx23885_dev_checkrevision() Hardware revision = 0xb0
cx23885[0]/0: found at 0000:03:00.0, rev: 2, irq: 11, latency: 0, mmio:
0xdf800000
cx23885 0000:03:00.0: setting latency timer to 64
tun: Universal TUN/TAP device driver, 1.6
A problem appear when tunning card using szap-s2 :
# szap-s2 szap-s2 -c /root/channels.conf -x -M 5 -C 89 -l 9750 -S 1 MyCh
reading channels from file '/root/channels.conf'
zapping to 1 'MyCh':
delivery DVB-S2, modulation 8PSK
sat 0, frequency 8420 MHz V, symbolrate 29400000, coderate 8/9,rolloff 0.35
vpid 0x0286, apid 0x1fff, sid 0x0000
using '/dev/dvb/adapter0/frontend0' and '/dev/dvb/adapter0/demux0'
ds3000_firmware_ondemand: Waiting for firmware upload (dvb-fe-ds3000.fw)...
firmware: requesting dvb-fe-ds3000.fw
ds3000_firmware_ondemand: Waiting for firmware upload(2)...
ds3000_firmware_ondemand: No firmware uploaded (timeout or file not found?)
ds3000_tune: Unable initialise the firmware
Apparently it can't locate a firmware file, yet :
# ls -l /lib/firmware/
-rwxr-xr-x 1 root root 8192 May 3 07:09 dvb-fe-ds3000.fw
Any ideas why this happens?
Thanks and best regards,
Hamza Ferrag
next reply other threads:[~2010-07-13 18:41 UTC|newest]
Thread overview: 2+ messages / expand[flat|nested] mbox.gz Atom feed top
2010-07-13 18:41 Hamza Ferrag [this message]
-- strict thread matches above, loose matches on Subject: below --
2010-07-13 18:32 TeVii S470 Tunning Issue (Kernel 2.6.27-21) Hamza Ferrag
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=4C3CB355.7070904@gmail.com \
--to=hferraggreat@gmail.com \
--cc=linux-media@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.