All of lore.kernel.org
 help / color / mirror / Atom feed
From: David Milburn <dmilburn@redhat.com>
To: Konstantinos Skarlatos <k.skarlatos@gmail.com>
Cc: linux-scsi@vger.kernel.org, James.Bottomley@suse.de,
	sgruszka@redhat.com, satyasrinivasp@hcl.in, jeff@garzik.org
Subject: Re: [PATCH] mvsas: mvs_lu_reset iterates phy num times when releasing task
Date: Fri, 06 Aug 2010 14:01:03 -0500	[thread overview]
Message-ID: <4C5C5BEF.8040509@redhat.com> (raw)
In-Reply-To: <4C5C448C.2040509@gmail.com>

Konstantinos Skarlatos wrote:
>  Hello,
> 
> Does this patch fix any of the mvs_abort_task:rc= 5 and the other 
> problems that are being reported for this driver? for more info please 
> see http://marc.info/?l=linux-scsi&m=127583131805429&w=2

No, these problems begin with the warning from ata_qc_issue,
it says that a non-NCQ command is being issued, but there is
an active NCQ command on the link.

BTW, I should have added:

Reported-by: Stanislaw Gruszka <sgruszka@redhat.com>

David

> 
> On 6/8/2010 7:16 μμ, David Milburn wrote:
>> mvs_lu_reset should not call mvs_release_task phy number of times,
>> each phy is handled in mvs_release_task.
>>
>> Signed-off-by: David Milburn<dmilburn@redhat.com>
>> Cc: Stanislaw Gruszka<sgruszka@redhat.com>
>> Cc: Srinivas<satyasrinivasp@hcl.in>
>> Cc: Andy Yan<ayan@marvell.com>
>> ---
>>   drivers/scsi/mvsas/mv_sas.c |    6 ++----
>>   1 files changed, 2 insertions(+), 4 deletions(-)
>>
>> diff --git a/drivers/scsi/mvsas/mv_sas.c b/drivers/scsi/mvsas/mv_sas.c
>> index adedaa9..013ab8d 100644
>> --- a/drivers/scsi/mvsas/mv_sas.c
>> +++ b/drivers/scsi/mvsas/mv_sas.c
>> @@ -1551,7 +1551,7 @@ static int mvs_debug_I_T_nexus_reset(struct 
>> domain_device *dev)
>>   int mvs_lu_reset(struct domain_device *dev, u8 *lun)
>>   {
>>       unsigned long flags;
>> -    int i, phyno[WIDE_PORT_MAX_PHY], num , rc = TMF_RESP_FUNC_FAILED;
>> +    int rc = TMF_RESP_FUNC_FAILED;
>>       struct mvs_tmf_task tmf_task;
>>       struct mvs_device * mvi_dev = dev->lldd_dev;
>>       struct mvs_info *mvi = mvi_dev->mvi_info;
>> @@ -1560,10 +1560,8 @@ int mvs_lu_reset(struct domain_device *dev, u8 
>> *lun)
>>       mvi_dev->dev_status = MVS_DEV_EH;
>>       rc = mvs_debug_issue_ssp_tmf(dev, lun,&tmf_task);
>>       if (rc == TMF_RESP_FUNC_COMPLETE) {
>> -        num = mvs_find_dev_phyno(dev, phyno);
>>           spin_lock_irqsave(&mvi->lock, flags);
>> -        for (i = 0; i<  num; i++)
>> -            mvs_release_task(mvi, dev);
>> +        mvs_release_task(mvi, dev);
>>           spin_unlock_irqrestore(&mvi->lock, flags);
>>       }
>>       /* If failed, fall-through I_T_Nexus reset */
>> -- 
>> To unsubscribe from this list: send the line "unsubscribe linux-scsi" in
>> the body of a message to majordomo@vger.kernel.org
>> More majordomo info at  http://vger.kernel.org/majordomo-info.html
> 

--
To unsubscribe from this list: send the line "unsubscribe linux-scsi" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

  reply	other threads:[~2010-08-06 19:01 UTC|newest]

Thread overview: 16+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2010-08-06 16:16 [PATCH] mvsas: mvs_lu_reset iterates phy num times when releasing task David Milburn
2010-08-06 17:21 ` Konstantinos Skarlatos
2010-08-06 19:01   ` David Milburn [this message]
2010-08-09  8:17     ` Konstantinos Skarlatos
2010-09-03 22:13   ` David Milburn
2010-09-04 19:04     ` Konstantinos Skarlatos
2010-09-08 10:53     ` Konstantinos Skarlatos
2010-09-09 10:49       ` Konstantinos Skarlatos
2010-09-09 14:13         ` David Milburn
2010-09-11 15:57           ` Konstantinos Skarlatos
2010-09-15 13:49             ` David Milburn
2010-09-20 21:38               ` Konstantinos Skarlatos
2010-09-11 15:05         ` Konstantinos Skarlatos
2010-08-07  8:26 ` Jeff Garzik
2010-08-10 19:10 ` Audio Haven
2010-08-10 21:22   ` David Milburn

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=4C5C5BEF.8040509@redhat.com \
    --to=dmilburn@redhat.com \
    --cc=James.Bottomley@suse.de \
    --cc=jeff@garzik.org \
    --cc=k.skarlatos@gmail.com \
    --cc=linux-scsi@vger.kernel.org \
    --cc=satyasrinivasp@hcl.in \
    --cc=sgruszka@redhat.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.