From mboxrd@z Thu Jan 1 00:00:00 1970 Return-path: Received: from mail-in-06.arcor-online.net ([151.189.21.46]:38641 "EHLO mail-in-06.arcor-online.net" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S933403Ab0KORn5 (ORCPT ); Mon, 15 Nov 2010 12:43:57 -0500 Message-ID: <4CE1715B.2070403@arcor.de> Date: Mon, 15 Nov 2010 18:43:55 +0100 From: Stefan Ringel MIME-Version: 1.0 To: Richard Zidlicky CC: Massis Sirapian , linux-media@vger.kernel.org Subject: Re: HVR900H : IR Remote Control References: <4CDFF446.2000403@free.fr> <4CE0047D.8060401@arcor.de> <4CE03704.4070300@free.fr> <20101115091544.GA23490@linux-m68k.org> In-Reply-To: <20101115091544.GA23490@linux-m68k.org> Content-Type: text/plain; charset=ISO-8859-1; format=flowed Content-Transfer-Encoding: 7bit List-ID: Sender: Am 15.11.2010 10:15, schrieb Richard Zidlicky: > On Sun, Nov 14, 2010 at 08:22:44PM +0100, Massis Sirapian wrote: > >> Thanks Stefan. I've checked the /drivers/media/IR/keymaps of the kernel >> source directory, but nothing seems to fit my remote, which is a >> DSR-0012 : http://lirc.sourceforge.net/remotes/hauppauge/DSR-0112.jpg. > FYI, this remote is identical to that shipped with (most?) Haupauge Ministicks > and the codes reportedly match the rc-dib0700-rc5.c keymap. However I have not figured > out how to make the userspace work with the new ir-code yet. > > Richard With my terratec cinergy hybrid xe (equal yours hvr900h) I have this: localhost:/usr/src/src/tm6000_alsa/utils/v4l-utils # ir-keytable Found /sys/class/rc/rc0/ (/dev/input/event5) with: Driver tm6000, table rc-nec-terratec-cinergy-xs Supported protocols: NEC RC-5 Enabled protocols: NEC I can change outside the keytable.