From mboxrd@z Thu Jan 1 00:00:00 1970 Return-path: Received: from mx1.polytechnique.org ([129.104.30.34]:44958 "EHLO mx1.polytechnique.org" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1755170Ab0KPUm0 (ORCPT ); Tue, 16 Nov 2010 15:42:26 -0500 Message-ID: <4CE2ECB2.2010004@free.fr> Date: Tue, 16 Nov 2010 21:42:26 +0100 From: Massis Sirapian MIME-Version: 1.0 To: Stefan Ringel CC: Richard Zidlicky , linux-media@vger.kernel.org Subject: Re: HVR900H : IR Remote Control References: <4CDFF446.2000403@free.fr> <4CE0047D.8060401@arcor.de> <4CE03704.4070300@free.fr> <20101115091544.GA23490@linux-m68k.org> <4CE1715B.2070403@arcor.de> <4CE19F86.3010901@free.fr> <4CE1A13C.9000707@arcor.de> <4CE2E8FE.2030004@free.fr> <4CE2EA70.3060306@arcor.de> In-Reply-To: <4CE2EA70.3060306@arcor.de> Content-Type: text/plain; charset=ISO-8859-1; format=flowed Content-Transfer-Encoding: 8bit List-ID: Sender: Le 16/11/2010 21:32, Stefan Ringel a écrit : > Am 16.11.2010 21:26, schrieb Massis Sirapian: >> Le 15/11/2010 22:08, Stefan Ringel a écrit : >>> Am 15.11.2010 22:00, schrieb Massis Sirapian: >>>> Le 15/11/2010 18:43, Stefan Ringel a écrit : >>>>> Am 15.11.2010 10:15, schrieb Richard Zidlicky: >>>>>> On Sun, Nov 14, 2010 at 08:22:44PM +0100, Massis Sirapian wrote: >>>>>> >>>>>>> Thanks Stefan. I've checked the /drivers/media/IR/keymaps of the >>>>>>> kernel >>>>>>> source directory, but nothing seems to fit my remote, which is a >>>>>>> DSR-0012 : >>>>>>> http://lirc.sourceforge.net/remotes/hauppauge/DSR-0112.jpg. >>>>>> FYI, this remote is identical to that shipped with (most?) Haupauge >>>>>> Ministicks >>>>>> and the codes reportedly match the rc-dib0700-rc5.c keymap. However I >>>>>> have not figured >>>>>> out how to make the userspace work with the new ir-code yet. >>>>>> >>>>>> Richard >>>>> With my terratec cinergy hybrid xe (equal yours hvr900h) I have this: >>>>> >>>>> localhost:/usr/src/src/tm6000_alsa/utils/v4l-utils # ir-keytable >>>>> Found /sys/class/rc/rc0/ (/dev/input/event5) with: >>>>> Driver tm6000, table rc-nec-terratec-cinergy-xs >>>>> Supported protocols: NEC RC-5 Enabled protocols: NEC >>>>> >>>>> I can change outside the keytable. >>>>> >>>>> >>>> Just loading tm6000-dvb, I have this : >>>> [ 253.829422] IR NEC protocol handler initialized >>>> [ 253.846608] IR RC5(x) protocol handler initialized >>>> [ 253.883882] tm6000: module is from the staging directory, the >>>> quality is unknown, you have been warned. >>>> [ 253.886611] tm6000 v4l2 driver version 0.0.2 loaded >>>> [ 253.887558] tm6000: alt 0, interface 0, class 255 >>>> [ 253.887574] tm6000: alt 0, interface 0, class 255 >>>> [ 253.887575] tm6000: Bulk IN endpoint: 0x82 (max size=512 bytes) >>>> [ 253.887577] tm6000: alt 0, interface 0, class 255 >>>> [ 253.887578] tm6000: alt 1, interface 0, class 255 >>>> [ 253.887579] tm6000: ISOC IN endpoint: 0x81 (max size=3072 bytes) >>>> [ 253.887580] tm6000: alt 1, interface 0, class 255 >>>> [ 253.887581] tm6000: alt 1, interface 0, class 255 >>>> [ 253.887582] tm6000: INT IN endpoint: 0x83 (max size=4 bytes) >>>> [ 253.887583] tm6000: alt 2, interface 0, class 255 >>>> [ 253.887584] tm6000: alt 2, interface 0, class 255 >>>> [ 253.887586] tm6000: alt 2, interface 0, class 255 >>>> [ 253.887587] tm6000: alt 3, interface 0, class 255 >>>> [ 253.887588] tm6000: alt 3, interface 0, class 255 >>>> [ 253.887589] tm6000: alt 3, interface 0, class 255 >>>> [ 253.887590] tm6000: New video device @ 480 Mbps (2040:6600, ifnum 0) >>>> [ 253.887591] tm6000: Found Hauppauge WinTV HVR-900H / WinTV USB2-Stick >>>> [ 253.888848] IR RC6 protocol handler initialized >>>> [ 253.890209] IR JVC protocol handler initialized >>>> [ 253.891515] IR Sony protocol handler initialized >>>> [ 253.893815] lirc_dev: IR Remote Control driver registered, major 250 >>>> [ 253.894722] IR LIRC bridge handler initialized >>>> [ 254.806122] Board version = 0x67980bf4 >>>> [ 255.197098] board=0x67980bf4 >>>> [ 255.320786] tm6000 #0: i2c eeprom 00: 01 59 54 45 12 01 00 02 00 00 >>>> 00 40 40 20 00 66 .YTE.......@@ .f >>>> [ 255.512277] tm6000 #0: i2c eeprom 10: 69 00 10 20 40 01 02 03 48 00 >>>> 79 00 62 00 72 00 i.. @...H.y.b.r. >>>> [ 255.703783] tm6000 #0: i2c eeprom 20: ff 00 64 ff ff ff ff ff ff ff >>>> ff ff ff ff ff ff ..d............. >>>> [ 255.895281] tm6000 #0: i2c eeprom 30: ff ff ff ff ff ff ff ff ff ff >>>> ff ff ff ff ff ff ................ >>>> [ 256.086786] tm6000 #0: i2c eeprom 40: 10 03 48 00 56 00 52 00 39 00 >>>> 30 00 30 00 48 00 ..H.V.R.9.0.0.H. >>>> [ 256.278289] tm6000 #0: i2c eeprom 50: ff ff ff ff ff ff ff ff ff ff >>>> ff ff ff ff ff ff ................ >>>> [ 256.469783] tm6000 #0: i2c eeprom 60: 30 ff ff ff 0f ff ff ff ff ff >>>> 0a 03 32 00 2e 00 0...........2... >>>> [ 256.661287] tm6000 #0: i2c eeprom 70: 3f 00 ff ff ff ff ff ff ff ff >>>> ff ff ff ff ff ff ?............... >>>> [ 256.852786] tm6000 #0: i2c eeprom 80: ff ff ff ff ff ff ff ff ff ff >>>> ff ff ff ff ff ff ................ >>>> [ 257.044307] tm6000 #0: i2c eeprom 90: 30 ff ff ff 16 03 34 00 30 00 >>>> 33 00 32 00 32 00 0.....4.0.3.2.2. >>>> [ 257.235798] tm6000 #0: i2c eeprom a0: 33 00 36 00 39 00 30 00 35 00 >>>> 00 00 77 00 ff ff 3.6.9.0.5...w... >>>> [ 257.427295] tm6000 #0: i2c eeprom b0: ff ff ff ff ff ff ff ff ff ff >>>> ff ff ff ff ff ff ................ >>>> [ 257.618794] tm6000 #0: i2c eeprom c0: ff ff ff ff ff ff ff ff ff ff >>>> ff ff ff ff ff ff ................ >>>> [ 257.810303] tm6000 #0: i2c eeprom d0: ff ff ff ff ff ff ff ff ff ff >>>> ff ff ff ff ff ff ................ >>>> [ 258.001810] tm6000 #0: i2c eeprom e0: ff ff ff ff ff ff ff ff ff ff >>>> ff ff ff ff ff ff ................ >>>> [ 258.193291] tm6000 #0: i2c eeprom f0: ff ff ff ff ff ff ff ff ff ff >>>> ff ff ff ff ff ff ................ >>>> [ 258.372825] ................ >>>> [ 258.378849] tuner 4-0061: chip found @ 0xc2 (tm6000 #0) >>>> [ 258.400777] xc2028 4-0061: creating new instance >>>> [ 258.400779] xc2028 4-0061: type set to XCeive xc2028/xc3028 tuner >>>> [ 258.400781] Setting firmware parameters for xc2028 >>>> [ 258.427221] xc2028 4-0061: Loading 81 firmware images from >>>> xc3028L-v36.fw, type: xc2028 firmware, ver 3.6 >>>> [ 258.668063] xc2028 4-0061: Loading firmware for type=BASE (1), id >>>> 0000000000000000. >>>> [ 333.245767] xc2028 4-0061: Loading firmware for type=(0), id >>>> 000000000000b700. >>>> [ 334.510473] SCODE (20000000), id 000000000000b700: >>>> [ 334.510476] xc2028 4-0061: Loading SCODE for type=MONO SCODE >>>> HAS_IF_4320 (60008000), id 0000000000008000. >>>> [ 335.783252] Trident TVMaster TM5600/TM6000/TM6010 USB2 board (Load >>>> status: 0) >>>> [ 335.783271] usbcore: registered new interface driver tm6000 >>>> [ 335.784191] tm6000: open called (dev=video1) >>>> [ 335.815994] tm6000_dvb: module is from the staging directory, the >>>> quality is unknown, you have been warned. >>>> [ 335.854973] DVB: registering new adapter (Trident TVMaster 6000 >>>> DVB-T) >>>> [ 335.854976] DVB: registering adapter 0 frontend 0 (Zarlink ZL10353 >>>> DVB-T)... >>>> [ 335.855087] xc2028 4-0061: attaching existing instance >>>> [ 335.855088] xc2028 4-0061: type set to XCeive xc2028/xc3028 tuner >>>> [ 335.855090] tm6000: XC2028/3028 asked to be attached to frontend! >>>> [ 335.855343] tm6000 #0: Initialized (TM6000 dvb Extension) extension >>>> [ 337.338951] tm6000: open called (dev=video1) >>>> >>>> Then, ir-keytable complains : "Couldn't find any node at >>>> /sys/class/rc/rc*." >>>> >>>> So it looks Jarod is right : tm6000 is loading, it calls lirc_dev and >>>> a bunch of protocol modules, but the IR doesn't seem to be handled. >>>> >>>> I saw some ir lines in tm6000-cards.c for the HVR900H and thought the >>>> IR receiver was supported. It's a bit disturbing if the cinergy stick >>>> you evoke is equivalent to HVR900H and works, while HVR900H's IR part >>>> isn't implemented ? >>>> >>>> Massis >>>> >>>> >>>> -- >>>> To unsubscribe from this list: send the line "unsubscribe >>>> linux-media" in >>>> the body of a message to majordomo@vger.kernel.org >>>> More majordomo info at http://vger.kernel.org/majordomo-info.html >>> add this line with the right map name >>> >>> .ir_codes = RC_MAP_NEC_TERRATEC_CINERGY_XS, >>> >>> in this struct >>> >>> [TM6010_BOARD_HAUPPAUGE_900H] = { >>> .name = "Hauppauge WinTV HVR-900H / WinTV USB2-Stick", >>> .tuner_type = TUNER_XC2028, /* has a XC3028 */ >>> .tuner_addr = 0xc2 >> 1, >>> .demod_addr = 0x1e >> 1, >>> .type = TM6010, >>> .caps = { >>> .has_tuner = 1, >>> .has_dvb = 1, >>> .has_zl10353 = 1, >>> .has_eeprom = 1, >>> .has_remote = 1, >>> }, >>> .gpio = { >>> .tuner_reset = TM6010_GPIO_2, >>> .tuner_on = TM6010_GPIO_3, >>> .demod_reset = TM6010_GPIO_1, >>> .demod_on = TM6010_GPIO_4, >>> .power_led = TM6010_GPIO_7, >>> .dvb_led = TM6010_GPIO_5, >>> .ir = TM6010_GPIO_0, >>> }, >>> >>> Stefan >>> >> Thank you Stefan, I've added .ir_codes = RC_MAP_DIB0700_RC5_TABLE (as >> you suggested to use the right map name and as Richard understated >> that the RC are similar) to the struct, and now, dmesg gives : >> >> [ 206.350288] Registered IR keymap rc-dib0700-rc5 >> [ 206.350442] input: tm5600/60x0 IR (tm6000 #0) as >> /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.4/rc/rc0/input7 >> [ 206.350489] rc0: tm5600/60x0 IR (tm6000 #0) as >> /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.4/rc/rc0 >> >> ir-keytable comes : found /sys/class/rc/rc0/ (/dev/input/event7) with: >> Driver tm6000, table rc-dib0700-rc5 >> Supported protocols: NEC RC-5 Enabled protocols: RC-5 >> >> However, when I press some RC buttons, I hhave no output on the screen >> ; with lircd --driver=devinput --device=/dev/input/event7 and irw, >> nothing happens when I use the RC. I've tried to switch protocol from >> RC5 to NEC, but nothing occurs anyway. >> >> Does it mean I have to test with another RC_MAPs in the tm6000-cards.c >> ? How to use the created input device? >> >> Thanks >> >> Massis >> >> -- >> To unsubscribe from this list: send the line "unsubscribe linux-media" in >> the body of a message to majordomo@vger.kernel.org >> More majordomo info at http://vger.kernel.org/majordomo-info.html > load the tm6000 module with the parameter "ir_debug=1". (not the > tm6000_dvb), and check dmsg after you pressed a button. Have the > received code the same from the map? > I have only [ 5232.133592] tm5600/60x0 IR (tm6000 #0)/ir: ir->get_key result data=0000 endlessly, and nothing seems to change when I press a button.