From mboxrd@z Thu Jan 1 00:00:00 1970 Return-path: Received: from mx1.polytechnique.org ([129.104.30.34]:52473 "EHLO mx1.polytechnique.org" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1752922Ab0KRT7c (ORCPT ); Thu, 18 Nov 2010 14:59:32 -0500 Message-ID: <4CE5858E.10905@free.fr> Date: Thu, 18 Nov 2010 20:59:10 +0100 From: Massis Sirapian MIME-Version: 1.0 To: Stefan Ringel CC: Richard Zidlicky , linux-media@vger.kernel.org Subject: Re: HVR900H : IR Remote Control References: <4CDFF446.2000403@free.fr> <4CE0047D.8060401@arcor.de> <4CE03704.4070300@free.fr> <20101115091544.GA23490@linux-m68k.org> <4CE1715B.2070403@arcor.de> <4CE19F86.3010901@free.fr> <4CE1A13C.9000707@arcor.de> <4CE2E8FE.2030004@free.fr> <4CE2EA70.3060306@arcor.de> <4CE2ECB2.2010004@free.fr> <4CE2EF14.40007@arcor.de> <4CE42E0D.6030903@free.fr> In-Reply-To: <4CE42E0D.6030903@free.fr> Content-Type: text/plain; charset=ISO-8859-1; format=flowed Content-Transfer-Encoding: 8bit List-ID: Sender: Le 17/11/2010 20:33, Massis Sirapian a écrit : > >>>> load the tm6000 module with the parameter "ir_debug=1". (not the >>>> tm6000_dvb), and check dmsg after you pressed a button. Have the >>>> received code the same from the map? >>>> >>> I have only >>> [ 5232.133592] tm5600/60x0 IR (tm6000 #0)/ir: ir->get_key result >>> data=0000 >>> endlessly, and nothing seems to change when I press a button. >> can you test a little change in tm6000-input.c. The dprintk line "this >> line" move to "here", and then testing it. >> >> return; >> } >> >> dprintk("ir->get_key result data=%04x\n", poll_result.rc_data); // this >> line >> >> if (ir->key) { >> // here >> ir_keydown(ir->rc, poll_result.rc_data, 0); >> ir->key = 0; >> >> >> >> -- >> To unsubscribe from this list: send the line "unsubscribe linux-media" in >> the body of a message to majordomo@vger.kernel.org >> More majordomo info at http://vger.kernel.org/majordomo-info.html >> > I've just tested the new kernel compiled with the modifie tm6000-cards.c > > Nothing happens when I press a button : > > [ 227.643920] input: tm5600/60x0 IR (tm6000 #0) as > /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.4/rc/rc0/input7 > [ 227.643965] rc0: tm5600/60x0 IR (tm6000 #0) as > /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.4/rc/rc0 > [ 227.759492] usbcore: registered new interface driver tm6000 > [ 229.015963] tm6000: open called (dev=video1) > > are the last lines of dmesg, and my pressing any button doesn't change > anything. > > Massis > > -- > To unsubscribe from this list: send the line "unsubscribe linux-media" in > the body of a message to majordomo@vger.kernel.org > More majordomo info at http://vger.kernel.org/majordomo-info.html > Hi, Does it mean that the IR isn't wired in the case of HVR900H ? When you said that your Terratec equals the HVR900H, does it imply that if IR works on cinergy xe, it should on the HVR900H? Thank you Massis