From mboxrd@z Thu Jan 1 00:00:00 1970 From: Peizhao Hu Date: Wed, 16 Feb 2011 10:10:40 +1000 Subject: [ath9k-devel] Progress on Ath9k HT support on Adhoc mode In-Reply-To: References: Message-ID: <4D5B1600.7050300@gmail.com> List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: ath9k-devel@lists.ath9k.org Hi, I meant the number of actual antenna was used. I am not sure whether it has the same antenna setting in /sys/kernel/debug/ieee80211 like ath5k. regards; Peizhao On 15/02/11 19:10, Sagar Bijwe wrote: > I would also like to know that... > -Sagar > > On Tue, Feb 15, 2011 at 2:35 PM, Baldomero Coll > wrote: > > Hello, > > Can you please tell me how do you select one o two antennas? > > I'm using a similar setting than you: > Linux kernel: 2.6.32-28-generic-pae. > Driver: compat-wireless-2011-01-17 and iw-0.9.21 with the patch > suggested by Alex. > Radio card: Ubiquiti SR71x > > Thanks in advance, > Baldomero > > > Hi all, > > I would like to confirm my findings. My test platform > configurations are > follow. > Board: pcengine alix3d2 > Linux kernel: 2.6.35 from linux-wireless git > Driver: compat-wireless-2011-01-17 and iw-0.9.21 with the patch > suggested by Alex. > Radio card: Ubiqiti SR71a on channel 36 with HT40+ > Measurement tool and settings: Iperf, UDP, 100Mb offered load > > Recored throughput: 50-54Mbps (one antenna); 78-80Mbps (two or > three > antennas). > > > > _______________________________________________ > ath9k-devel mailing list > ath9k-devel at lists.ath9k.org > https://lists.ath9k.org/mailman/listinfo/ath9k-devel > > > > _______________________________________________ > ath9k-devel mailing list > ath9k-devel at lists.ath9k.org > https://lists.ath9k.org/mailman/listinfo/ath9k-devel -------------- next part -------------- An HTML attachment was scrubbed... URL: http://lists.ath9k.org/pipermail/ath9k-devel/attachments/20110216/15447189/attachment.htm