From mboxrd@z Thu Jan 1 00:00:00 1970 Return-path: Received: from mail-yw0-f46.google.com ([209.85.213.46]:39746 "EHLO mail-yw0-f46.google.com" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1750830Ab1CTA4I (ORCPT ); Sat, 19 Mar 2011 20:56:08 -0400 Received: by ywj3 with SMTP id 3so2011170ywj.19 for ; Sat, 19 Mar 2011 17:56:07 -0700 (PDT) Message-ID: <4D8550A3.5010604@aapt.net.au> Date: Sun, 20 Mar 2011 11:56:03 +1100 From: Andrew Goff Reply-To: goffa72@gmail.com MIME-Version: 1.0 To: linux-media@vger.kernel.org Subject: Leadtek Winfast 1800H FM Tuner Content-Type: text/plain; charset=UTF-8; format=flowed Content-Transfer-Encoding: 8bit List-ID: Sender: Hi, I hope someone may be able to help me solve a problem or point me in the right direction. I have been using a Leadtek Winfast DTV1800H card (Xceive xc3028 tuner) for a while now without any issues (DTV & Radio have been working well), I recently decided to get another tuner card, Leadtek Winfast DTV2000DS (Tuner: NXP TDA18211, but detected as TDA18271 by V4L drivers, Chipset: AF9015 + AF9013 ) and had to compile and install the V4L drivers to get it working. Now DTV on both cards work well but there is a problem with the radio tuner on the 1800H card. After installing the more recent V4L drivers the radio frequency is 2.7MHz out, so if I want to listen to 104.9 I need to tune the radio to 107.6. Now I could just change all my preset stations but I can not listen to my preferred stations as I need to set the frequency above 108MHz. Andrew