[ 0.000000] Initializing cgroup subsys cpuset [ 0.000000] Initializing cgroup subsys cpu [ 0.000000] Linux version 2.6.32-30-generic (buildd@vernadsky) (gcc version 4.4.3 (Ubuntu 4.4.3-4ubuntu5) ) #59-Ubuntu SMP Tue Mar 1 21:30:21 UTC 2011 (Ubuntu 2.6.32-30.59-generic 2.6.32.29+drm33.13) [ 0.000000] KERNEL supported cpus: [ 0.000000] Intel GenuineIntel [ 0.000000] AMD AuthenticAMD [ 0.000000] NSC Geode by NSC [ 0.000000] Cyrix CyrixInstead [ 0.000000] Centaur CentaurHauls [ 0.000000] Transmeta GenuineTMx86 [ 0.000000] Transmeta TransmetaCPU [ 0.000000] UMC UMC UMC UMC [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009ec00 (usable) [ 0.000000] BIOS-e820: 000000000009ec00 - 00000000000a0000 (reserved) [ 0.000000] BIOS-e820: 00000000000e3000 - 0000000000100000 (reserved) [ 0.000000] BIOS-e820: 0000000000100000 - 000000005ff90000 (usable) [ 0.000000] BIOS-e820: 000000005ff90000 - 000000005ff9e000 (ACPI data) [ 0.000000] BIOS-e820: 000000005ff9e000 - 000000005ffe0000 (ACPI NVS) [ 0.000000] BIOS-e820: 000000005ffe0000 - 000000005ffee000 (reserved) [ 0.000000] BIOS-e820: 000000005fff0000 - 0000000060000000 (reserved) [ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved) [ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fef00000 (reserved) [ 0.000000] BIOS-e820: 00000000fff00000 - 0000000100000000 (reserved) [ 0.000000] DMI present. [ 0.000000] AMI BIOS detected: BIOS may corrupt low RAM, working around it. [ 0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved) [ 0.000000] last_pfn = 0x5ff90 max_arch_pfn = 0x100000 [ 0.000000] MTRR default type: uncachable [ 0.000000] MTRR fixed ranges enabled: [ 0.000000] 00000-9FFFF write-back [ 0.000000] A0000-EFFFF uncachable [ 0.000000] F0000-FFFFF write-protect [ 0.000000] MTRR variable ranges enabled: [ 0.000000] 0 base 0000000000 mask FFC0000000 write-back [ 0.000000] 1 base 0040000000 mask FFE0000000 write-back [ 0.000000] 2 disabled [ 0.000000] 3 disabled [ 0.000000] 4 disabled [ 0.000000] 5 disabled [ 0.000000] 6 disabled [ 0.000000] 7 disabled [ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106 [ 0.000000] Scanning 0 areas for low memory corruption [ 0.000000] modified physical RAM map: [ 0.000000] modified: 0000000000000000 - 0000000000010000 (reserved) [ 0.000000] modified: 0000000000010000 - 000000000009ec00 (usable) [ 0.000000] modified: 000000000009ec00 - 00000000000a0000 (reserved) [ 0.000000] modified: 00000000000e3000 - 0000000000100000 (reserved) [ 0.000000] modified: 0000000000100000 - 000000005ff90000 (usable) [ 0.000000] modified: 000000005ff90000 - 000000005ff9e000 (ACPI data) [ 0.000000] modified: 000000005ff9e000 - 000000005ffe0000 (ACPI NVS) [ 0.000000] modified: 000000005ffe0000 - 000000005ffee000 (reserved) [ 0.000000] modified: 000000005fff0000 - 0000000060000000 (reserved) [ 0.000000] modified: 00000000fec00000 - 00000000fec01000 (reserved) [ 0.000000] modified: 00000000fee00000 - 00000000fef00000 (reserved) [ 0.000000] modified: 00000000fff00000 - 0000000100000000 (reserved) [ 0.000000] initial memory mapped : 0 - 00c00000 [ 0.000000] init_memory_mapping: 0000000000000000-00000000377fe000 [ 0.000000] Using x86 segment limits to approximate NX protection [ 0.000000] 0000000000 - 0000400000 page 4k [ 0.000000] 0000400000 - 0037400000 page 2M [ 0.000000] 0037400000 - 00377fe000 page 4k [ 0.000000] kernel direct mapping tables up to 377fe000 @ 10000-15000 [ 0.000000] RAMDISK: 37857000 - 37fefa7d [ 0.000000] Allocated new RAMDISK: 008e6000 - 0107ea7d [ 0.000000] Move RAMDISK from 0000000037857000 - 0000000037fefa7c to 008e6000 - 0107ea7c [ 0.000000] ACPI: RSDP 000fb6b0 00014 (v00 ACPIAM) [ 0.000000] ACPI: RSDT 5ff90000 00044 (v01 011309 RSDT1412 20090113 MSFT 00000097) [ 0.000000] ACPI: FACP 5ff90200 00084 (v01 011309 FACP1412 20090113 MSFT 00000097) [ 0.000000] ACPI: DSDT 5ff90450 0AA8D (v01 A1043 A1043000 00000000 INTL 20051117) [ 0.000000] ACPI: FACS 5ff9e000 00040 [ 0.000000] ACPI: APIC 5ff90390 00080 (v01 011309 APIC1412 20090113 MSFT 00000097) [ 0.000000] ACPI: MCFG 5ff90410 0003C (v01 011309 OEMMCFG 20090113 MSFT 00000097) [ 0.000000] ACPI: OEMB 5ff9e040 00072 (v01 011309 OEMB1412 20090113 MSFT 00000097) [ 0.000000] ACPI: HPET 5ff9aee0 00038 (v01 011309 OEMHPET0 20090113 MSFT 00000097) [ 0.000000] ACPI: INFO 5ff9e0c0 00124 (v01 011309 AMDINFO 20090113 MSFT 00000097) [ 0.000000] ACPI: NVHD 5ff9e1f0 00284 (v01 011309 NVHDCP 20090113 MSFT 00000097) [ 0.000000] ACPI: SSDT 5ff9af20 0028A (v01 A M I POWERNOW 00000001 AMD 00000001) [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] 647MB HIGHMEM available. [ 0.000000] 887MB LOWMEM available. [ 0.000000] mapped low ram: 0 - 377fe000 [ 0.000000] low ram: 0 - 377fe000 [ 0.000000] node 0 low ram: 00000000 - 377fe000 [ 0.000000] node 0 bootmap 00011000 - 00017f00 [ 0.000000] (9 early reservations) ==> bootmem [0000000000 - 00377fe000] [ 0.000000] #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000] [ 0.000000] #1 [0000001000 - 0000002000] EX TRAMPOLINE ==> [0000001000 - 0000002000] [ 0.000000] #2 [0000006000 - 0000007000] TRAMPOLINE ==> [0000006000 - 0000007000] [ 0.000000] #3 [0000100000 - 00008e1ed8] TEXT DATA BSS ==> [0000100000 - 00008e1ed8] [ 0.000000] #4 [000009ec00 - 0000100000] BIOS reserved ==> [000009ec00 - 0000100000] [ 0.000000] #5 [00008e2000 - 00008e522c] BRK ==> [00008e2000 - 00008e522c] [ 0.000000] #6 [0000010000 - 0000011000] PGTABLE ==> [0000010000 - 0000011000] [ 0.000000] #7 [00008e6000 - 000107ea7d] NEW RAMDISK ==> [00008e6000 - 000107ea7d] [ 0.000000] #8 [0000011000 - 0000018000] BOOTMAP ==> [0000011000 - 0000018000] [ 0.000000] found SMP MP-table at [c00ff780] ff780 [ 0.000000] Zone PFN ranges: [ 0.000000] DMA 0x00000010 -> 0x00001000 [ 0.000000] Normal 0x00001000 -> 0x000377fe [ 0.000000] HighMem 0x000377fe -> 0x0005ff90 [ 0.000000] Movable zone start PFN for each node [ 0.000000] early_node_map[2] active PFN ranges [ 0.000000] 0: 0x00000010 -> 0x0000009e [ 0.000000] 0: 0x00000100 -> 0x0005ff90 [ 0.000000] On node 0 totalpages: 392990 [ 0.000000] free_area_init_node: node 0, pgdat c079c940, node_mem_map c1080200 [ 0.000000] DMA zone: 32 pages used for memmap [ 0.000000] DMA zone: 0 pages reserved [ 0.000000] DMA zone: 3950 pages, LIFO batch:0 [ 0.000000] Normal zone: 1744 pages used for memmap [ 0.000000] Normal zone: 221486 pages, LIFO batch:31 [ 0.000000] HighMem zone: 1296 pages used for memmap [ 0.000000] HighMem zone: 164482 pages, LIFO batch:31 [ 0.000000] Using APIC driver default [ 0.000000] Detected use of extended apic ids on hypertransport bus [ 0.000000] ACPI: PM-Timer IO Port: 0x508 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x82] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x83] disabled) [ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0]) [ 0.000000] IOAPIC[0]: apic_id 2, version 17, address 0xfec00000, GSI 0-23 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 14 global_irq 14 high edge) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 15 global_irq 15 high edge) [ 0.000000] ACPI: IRQ0 used by override. [ 0.000000] ACPI: IRQ2 used by override. [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] ACPI: IRQ14 used by override. [ 0.000000] ACPI: IRQ15 used by override. [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] ACPI: HPET id: 0x10de8201 base: 0xfed00000 [ 0.000000] SMP: Allowing 4 CPUs, 2 hotplug CPUs [ 0.000000] nr_irqs_gsi: 24 [ 0.000000] PM: Registered nosave memory: 000000000009e000 - 000000000009f000 [ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000 [ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000e3000 [ 0.000000] PM: Registered nosave memory: 00000000000e3000 - 0000000000100000 [ 0.000000] Allocating PCI resources starting at 60000000 (gap: 60000000:9ec00000) [ 0.000000] Booting paravirtualized kernel on bare hardware [ 0.000000] NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:4 nr_node_ids:1 [ 0.000000] PERCPU: Embedded 14 pages/cpu @c2000000 s36056 r0 d21288 u1048576 [ 0.000000] pcpu-alloc: s36056 r0 d21288 u1048576 alloc=1*4194304 [ 0.000000] pcpu-alloc: [0] 0 1 2 3 [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 389918 [ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-2.6.32-30-generic root=UUID=dd3314e4-053f-455a-a0a3-aff02ba20c44 ro quiet splash [ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes) [ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) [ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) [ 0.000000] Enabling fast FPU save and restore... done. [ 0.000000] Enabling unmasked SIMD FPU exception support... done. [ 0.000000] Initializing CPU#0 [ 0.000000] allocated 7861760 bytes of page_cgroup [ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups [ 0.000000] Initializing HighMem for node 0 (000377fe:0005ff90) [ 0.000000] Memory: 1533868k/1572416k available (4689k kernel code, 36908k reserved, 2122k data, 664k init, 663112k highmem) [ 0.000000] virtual kernel memory layout: [ 0.000000] fixmap : 0xfff1d000 - 0xfffff000 ( 904 kB) [ 0.000000] pkmap : 0xff800000 - 0xffc00000 (4096 kB) [ 0.000000] vmalloc : 0xf7ffe000 - 0xff7fe000 ( 120 MB) [ 0.000000] lowmem : 0xc0000000 - 0xf77fe000 ( 887 MB) [ 0.000000] .init : 0xc07a7000 - 0xc084d000 ( 664 kB) [ 0.000000] .data : 0xc0594467 - 0xc07a6f08 (2122 kB) [ 0.000000] .text : 0xc0100000 - 0xc0594467 (4689 kB) [ 0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok. [ 0.000000] SLUB: Genslabs=13, HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1 [ 0.000000] Hierarchical RCU implementation. [ 0.000000] NR_IRQS:2304 nr_irqs:440 [ 0.000000] spurious 8259A interrupt: IRQ7. [ 0.000000] Console: colour VGA+ 80x25 [ 0.000000] console [tty0] enabled [ 0.000000] hpet clockevent registered [ 0.000000] HPET: 3 timers in total, 0 timers will be used for per-cpu timer [ 0.000000] Fast TSC calibration using PIT [ 0.000000] Detected 2499.647 MHz processor. [ 0.004005] Calibrating delay loop (skipped), value calculated using timer frequency.. 4999.29 BogoMIPS (lpj=9998588) [ 0.004020] Security Framework initialized [ 0.004039] AppArmor: AppArmor initialized [ 0.004046] Mount-cache hash table entries: 512 [ 0.004161] Initializing cgroup subsys ns [ 0.004164] Initializing cgroup subsys cpuacct [ 0.004168] Initializing cgroup subsys memory [ 0.004174] Initializing cgroup subsys devices [ 0.004176] Initializing cgroup subsys freezer [ 0.004178] Initializing cgroup subsys net_cls [ 0.004195] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) [ 0.004197] CPU: L2 Cache: 512K (64 bytes/line) [ 0.004199] CPU: Physical Processor ID: 0 [ 0.004201] CPU: Processor Core ID: 0 [ 0.004204] mce: CPU supports 5 MCE banks [ 0.004213] using C1E aware idle routine [ 0.004220] Performance Events: AMD PMU driver. [ 0.004225] ... version: 0 [ 0.004227] ... bit width: 48 [ 0.004228] ... generic registers: 4 [ 0.004230] ... value mask: 0000ffffffffffff [ 0.004232] ... max period: 00007fffffffffff [ 0.004233] ... fixed-purpose events: 0 [ 0.004235] ... event mask: 000000000000000f [ 0.004238] Checking 'hlt' instruction... OK. [ 0.021898] ACPI: Core revision 20090903 [ 0.035034] ftrace: converting mcount calls to 0f 1f 44 00 00 [ 0.035039] ftrace: allocating 21799 entries in 43 pages [ 0.036095] Enabling APIC mode: Flat. Using 1 I/O APICs [ 0.036571] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 [ 0.076903] CPU0: AMD Athlon(tm) Dual Core Processor 4850e stepping 02 [ 0.080001] Booting processor 1 APIC 0x1 ip 0x6000 [ 0.008000] Initializing CPU#1 [ 0.008000] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) [ 0.008000] CPU: L2 Cache: 512K (64 bytes/line) [ 0.008000] CPU: Physical Processor ID: 0 [ 0.008000] CPU: Processor Core ID: 1 [ 0.008000] System has AMD C1E enabled [ 0.164044] CPU1: AMD Athlon(tm) Dual Core Processor 4850e stepping 02 [ 0.008000] Switch to broadcast mode on CPU1 [ 0.164068] Brought up 2 CPUs [ 0.164070] Total of 2 processors activated (9999.27 BogoMIPS). [ 0.164279] CPU0 attaching sched-domain: [ 0.164281] domain 0: span 0-1 level MC [ 0.164283] groups: 0 1 [ 0.164289] CPU1 attaching sched-domain: [ 0.164291] domain 0: span 0-1 level MC [ 0.164293] groups: 1 0 [ 0.164355] Switch to broadcast mode on CPU0 [ 0.164355] devtmpfs: initialized [ 0.164355] regulator: core version 0.5 [ 0.164355] Time: 9:00:44 Date: 03/21/11 [ 0.164355] NET: Registered protocol family 16 [ 0.164355] EISA bus registered [ 0.164355] ACPI: bus type pci registered [ 0.164355] PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 255 [ 0.164355] PCI: Not using MMCONFIG. [ 0.164945] PCI: PCI BIOS revision 3.00 entry at 0xf0031, last bus=5 [ 0.164947] PCI: Using configuration type 1 for base access [ 0.164968] mtrr: your CPUs had inconsistent fixed MTRR settings [ 0.164970] mtrr: probably your BIOS does not setup all CPUs. [ 0.164972] mtrr: corrected configuration. [ 0.165748] Trying to unpack rootfs image as initramfs... [ 0.172051] bio: create slab at 0 [ 0.173060] ACPI: EC: Look up EC in DSDT [ 0.175881] ACPI: Executed 1 blocks of module-level executable AML code [ 0.184264] ACPI: Interpreter enabled [ 0.184268] ACPI: (supports S0 S1 S3 S4 S5) [ 0.184288] ACPI: Using IOAPIC for interrupt routing [ 0.184339] PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 255 [ 0.192229] PCI: MCFG area at e0000000 reserved in ACPI motherboard resources [ 0.192231] PCI: Using MMCONFIG for extended config space [ 0.207378] ACPI Warning: Incorrect checksum in table [OEMB] - 76, should be 69 (20090903/tbutils-314) [ 0.207617] ACPI: No dock devices found. [ 0.208013] ACPI: PCI Root Bridge [PCI0] (0000:00) [ 0.208271] pci 0000:00:01.0: reg 10 io port: [0x900-0x9ff] [ 0.208311] pci 0000:00:01.1: reg 10 io port: [0xe00-0xe3f] [ 0.208321] pci 0000:00:01.1: reg 20 io port: [0x600-0x63f] [ 0.208325] pci 0000:00:01.1: reg 24 io port: [0x700-0x73f] [ 0.208345] pci 0000:00:01.1: PME# supported from D3hot D3cold [ 0.208351] pci 0000:00:01.1: PME# disabled [ 0.208411] pci 0000:00:01.3: reg 10 32bit mmio: [0xf9e80000-0xf9efffff] [ 0.208538] pci 0000:00:02.0: reg 10 32bit mmio: [0xf9e7e000-0xf9e7efff] [ 0.208561] pci 0000:00:02.0: supports D1 D2 [ 0.208563] pci 0000:00:02.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.208566] pci 0000:00:02.0: PME# disabled [ 0.208588] pci 0000:00:02.1: reg 10 32bit mmio: [0xf9e7fc00-0xf9e7fcff] [ 0.208616] pci 0000:00:02.1: supports D1 D2 [ 0.208618] pci 0000:00:02.1: PME# supported from D0 D1 D2 D3hot D3cold [ 0.208621] pci 0000:00:02.1: PME# disabled [ 0.208647] pci 0000:00:04.0: reg 10 32bit mmio: [0xf9e7d000-0xf9e7dfff] [ 0.208670] pci 0000:00:04.0: supports D1 D2 [ 0.208672] pci 0000:00:04.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.208674] pci 0000:00:04.0: PME# disabled [ 0.208697] pci 0000:00:04.1: reg 10 32bit mmio: [0xf9e7f800-0xf9e7f8ff] [ 0.208725] pci 0000:00:04.1: supports D1 D2 [ 0.208726] pci 0000:00:04.1: PME# supported from D0 D1 D2 D3hot D3cold [ 0.208729] pci 0000:00:04.1: PME# disabled [ 0.208763] pci 0000:00:06.0: reg 20 io port: [0xffa0-0xffaf] [ 0.208801] pci 0000:00:07.0: reg 10 32bit mmio: [0xf9e78000-0xf9e7bfff] [ 0.208829] pci 0000:00:07.0: PME# supported from D3hot D3cold [ 0.208831] pci 0000:00:07.0: PME# disabled [ 0.208888] pci 0000:00:09.0: reg 10 io port: [0xc480-0xc487] [ 0.208892] pci 0000:00:09.0: reg 14 io port: [0xc400-0xc403] [ 0.208896] pci 0000:00:09.0: reg 18 io port: [0xc080-0xc087] [ 0.208899] pci 0000:00:09.0: reg 1c io port: [0xc000-0xc003] [ 0.208903] pci 0000:00:09.0: reg 20 io port: [0xbc00-0xbc0f] [ 0.208907] pci 0000:00:09.0: reg 24 32bit mmio: [0xf9e76000-0xf9e77fff] [ 0.208945] pci 0000:00:0a.0: reg 10 32bit mmio: [0xf9e7c000-0xf9e7cfff] [ 0.208949] pci 0000:00:0a.0: reg 14 io port: [0xb880-0xb887] [ 0.208952] pci 0000:00:0a.0: reg 18 32bit mmio: [0xf9e7f400-0xf9e7f4ff] [ 0.208956] pci 0000:00:0a.0: reg 1c 32bit mmio: [0xf9e7f000-0xf9e7f00f] [ 0.208976] pci 0000:00:0a.0: supports D1 D2 [ 0.208978] pci 0000:00:0a.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.208982] pci 0000:00:0a.0: PME# disabled [ 0.209017] pci 0000:00:0b.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.209020] pci 0000:00:0b.0: PME# disabled [ 0.209265] pci 0000:00:10.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.209272] pci 0000:00:10.0: PME# disabled [ 0.209546] pci 0000:00:12.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.209554] pci 0000:00:12.0: PME# disabled [ 0.209826] pci 0000:00:13.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.209834] pci 0000:00:13.0: PME# disabled [ 0.209968] pci 0000:01:06.0: reg 10 32bit mmio: [0xfa000000-0xfaffffff] [ 0.210027] pci 0000:01:06.1: reg 10 32bit mmio: [0xfb000000-0xfbffffff] [ 0.210082] pci 0000:01:06.2: reg 10 32bit mmio: [0xfc000000-0xfcffffff] [ 0.210154] pci 0000:01:07.0: reg 20 io port: [0xdc00-0xdc1f] [ 0.210174] pci 0000:01:07.0: supports D1 D2 [ 0.210176] pci 0000:01:07.0: PME# supported from D0 D1 D2 D3hot [ 0.210180] pci 0000:01:07.0: PME# disabled [ 0.210205] pci 0000:01:07.2: reg 10 32bit mmio: [0xf9fffc00-0xf9fffcff] [ 0.210239] pci 0000:01:07.2: supports D1 D2 [ 0.210241] pci 0000:01:07.2: PME# supported from D0 D1 D2 D3hot [ 0.210244] pci 0000:01:07.2: PME# disabled [ 0.210275] pci 0000:00:08.0: transparent bridge [ 0.210278] pci 0000:00:08.0: bridge io port: [0xd000-0xdfff] [ 0.210281] pci 0000:00:08.0: bridge 32bit mmio: [0xf9f00000-0xfcffffff] [ 0.210300] pci 0000:02:00.0: reg 10 32bit mmio: [0xfd000000-0xfdffffff] [ 0.210306] pci 0000:02:00.0: reg 14 64bit mmio pref: [0xd8000000-0xdfffffff] [ 0.210311] pci 0000:02:00.0: reg 1c 64bit mmio pref: [0xd6000000-0xd7ffffff] [ 0.210315] pci 0000:02:00.0: reg 24 io port: [0xec00-0xec7f] [ 0.210319] pci 0000:02:00.0: reg 30 32bit mmio pref: [0xfeae0000-0xfeafffff] [ 0.210345] pci 0000:00:0b.0: bridge io port: [0xe000-0xefff] [ 0.210348] pci 0000:00:0b.0: bridge 32bit mmio: [0xfd000000-0xfeafffff] [ 0.210352] pci 0000:00:0b.0: bridge 64bit mmio pref: [0xd6000000-0xdfffffff] [ 0.210537] pci 0000:05:00.0: reg 10 32bit mmio: [0xfebff800-0xfebfffff] [ 0.210546] pci 0000:05:00.0: reg 14 32bit mmio: [0xfebff400-0xfebff47f] [ 0.210568] pci 0000:05:00.0: reg 20 32bit mmio: [0xfebff000-0xfebff07f] [ 0.210577] pci 0000:05:00.0: reg 24 32bit mmio: [0xfebfec00-0xfebfec7f] [ 0.210674] pci 0000:00:13.0: bridge 32bit mmio: [0xfeb00000-0xfebfffff] [ 0.210726] pci_bus 0000:00: on NUMA node 0 [ 0.210730] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] [ 0.211016] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P1._PRT] [ 0.211101] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.IXVE._PRT] [ 0.211164] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.MXR0._PRT] [ 0.211229] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.BR12._PRT] [ 0.211302] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.BR13._PRT] [ 0.228492] ACPI: PCI Interrupt Link [LNKA] (IRQs 16 17 18 19) *11 [ 0.228736] ACPI: PCI Interrupt Link [LNKB] (IRQs 16 17 18 19) *10 [ 0.228968] ACPI: PCI Interrupt Link [LNKC] (IRQs 16 17 18 19) *0, disabled. [ 0.229205] ACPI: PCI Interrupt Link [LNKD] (IRQs 16 17 18 19) *15 [ 0.229442] ACPI: PCI Interrupt Link [LN0A] (IRQs 16 17 18 19) *10 [ 0.229676] ACPI: PCI Interrupt Link [LN0B] (IRQs 16 17 18 19) *0, disabled. [ 0.229910] ACPI: PCI Interrupt Link [LN0C] (IRQs 16 17 18 19) *0, disabled. [ 0.230142] ACPI: PCI Interrupt Link [LN0D] (IRQs 16 17 18 19) *0, disabled. [ 0.230375] ACPI: PCI Interrupt Link [LN1A] (IRQs 16 17 18 19) *0, disabled. [ 0.230613] ACPI: PCI Interrupt Link [LN1B] (IRQs 16 17 18 19) *0, disabled. [ 0.230847] ACPI: PCI Interrupt Link [LN1C] (IRQs 16 17 18 19) *0, disabled. [ 0.231082] ACPI: PCI Interrupt Link [LN1D] (IRQs 16 17 18 19) *0, disabled. [ 0.231318] ACPI: PCI Interrupt Link [LN2A] (IRQs 16 17 18 19) *11 [ 0.231551] ACPI: PCI Interrupt Link [LN2B] (IRQs 16 17 18 19) *0, disabled. [ 0.231784] ACPI: PCI Interrupt Link [LN2C] (IRQs 16 17 18 19) *0, disabled. [ 0.232028] ACPI: PCI Interrupt Link [LN2D] (IRQs 16 17 18 19) *0, disabled. [ 0.232267] ACPI: PCI Interrupt Link [LN3A] (IRQs 16 17 18 19) *15 [ 0.232501] ACPI: PCI Interrupt Link [LN3B] (IRQs 16 17 18 19) *0, disabled. [ 0.232736] ACPI: PCI Interrupt Link [LN3C] (IRQs 16 17 18 19) *0, disabled. [ 0.232970] ACPI: PCI Interrupt Link [LN3D] (IRQs 16 17 18 19) *0, disabled. [ 0.233203] ACPI: PCI Interrupt Link [LN4A] (IRQs 16 17 18 19) *0, disabled. [ 0.233439] ACPI: PCI Interrupt Link [LN4B] (IRQs 16 17 18 19) *0, disabled. [ 0.233673] ACPI: PCI Interrupt Link [LN4C] (IRQs 16 17 18 19) *0, disabled. [ 0.233907] ACPI: PCI Interrupt Link [LN4D] (IRQs 16 17 18 19) *0, disabled. [ 0.234141] ACPI: PCI Interrupt Link [LN5A] (IRQs 16 17 18 19) *0, disabled. [ 0.234376] ACPI: PCI Interrupt Link [LN5B] (IRQs 16 17 18 19) *0, disabled. [ 0.234612] ACPI: PCI Interrupt Link [LN5C] (IRQs 16 17 18 19) *0, disabled. [ 0.234847] ACPI: PCI Interrupt Link [LN5D] (IRQs 16 17 18 19) *0, disabled. [ 0.235081] ACPI: PCI Interrupt Link [LN6A] (IRQs 16 17 18 19) *0, disabled. [ 0.235316] ACPI: PCI Interrupt Link [LN6B] (IRQs 16 17 18 19) *0, disabled. [ 0.235550] ACPI: PCI Interrupt Link [LN6C] (IRQs 16 17 18 19) *0, disabled. [ 0.235786] ACPI: PCI Interrupt Link [LN6D] (IRQs 16 17 18 19) *0, disabled. [ 0.236029] ACPI: PCI Interrupt Link [LN7A] (IRQs 16 17 18 19) *0, disabled. [ 0.236264] ACPI: PCI Interrupt Link [LN7B] (IRQs 16 17 18 19) *0, disabled. [ 0.236499] ACPI: PCI Interrupt Link [LN7C] (IRQs 16 17 18 19) *0, disabled. [ 0.236734] ACPI: PCI Interrupt Link [LN7D] (IRQs 16 17 18 19) *0, disabled. [ 0.236972] ACPI: PCI Interrupt Link [LUB0] (IRQs 20 21 22 23) *10 [ 0.237209] ACPI: PCI Interrupt Link [LUB2] (IRQs 20 21 22 23) *10 [ 0.237447] ACPI: PCI Interrupt Link [LMAC] (IRQs 20 21 22 23) *10 [ 0.237684] ACPI: PCI Interrupt Link [LAZA] (IRQs 20 21 22 23) *10 [ 0.237925] ACPI: PCI Interrupt Link [SGRU] (IRQs 20 21 22 23) *10 [ 0.238169] ACPI: PCI Interrupt Link [LSMB] (IRQs 20 21 22 23) *15 [ 0.238407] ACPI: PCI Interrupt Link [LPMU] (IRQs 20 21 22 23) *11 [ 0.238646] ACPI: PCI Interrupt Link [LSA0] (IRQs 20 21 22 23) *5 [ 0.238928] ACPI: PCI Interrupt Link [LATA] (IRQs 20 21 22 23) *0, disabled. [ 0.239166] ACPI: PCI Interrupt Link [UB11] (IRQs 20 21 22 23) *15 [ 0.239403] ACPI: PCI Interrupt Link [UB12] (IRQs 20 21 22 23) *11 [ 0.239524] vgaarb: device added: PCI:0000:02:00.0,decodes=io+mem,owns=io+mem,locks=none [ 0.239527] vgaarb: loaded [ 0.239638] SCSI subsystem initialized [ 0.240001] libata version 3.00 loaded. [ 0.240001] usbcore: registered new interface driver usbfs [ 0.240001] usbcore: registered new interface driver hub [ 0.240001] usbcore: registered new device driver usb [ 0.240001] ACPI: WMI: Mapper loaded [ 0.240001] PCI: Using ACPI for IRQ routing [ 0.240156] NetLabel: Initializing [ 0.240158] NetLabel: domain hash size = 128 [ 0.240160] NetLabel: protocols = UNLABELED CIPSOv4 [ 0.240172] NetLabel: unlabeled traffic allowed by default [ 0.240204] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 31 [ 0.240208] hpet0: 3 comparators, 32-bit 25.000000 MHz counter [ 0.248118] Switching to clocksource hpet [ 0.253723] AppArmor: AppArmor Filesystem Enabled [ 0.253742] pnp: PnP ACPI init [ 0.253759] ACPI: bus type pnp registered [ 0.257267] pnp 00:06: io resource (0x900-0x97f) overlaps 0000:00:01.0 BAR 0 (0x900-0x9ff), disabling [ 0.257270] pnp 00:06: io resource (0x980-0x9ff) overlaps 0000:00:01.0 BAR 0 (0x900-0x9ff), disabling [ 0.262619] pnp: PnP ACPI: found 14 devices [ 0.262621] ACPI: ACPI bus type pnp unregistered [ 0.262624] PnPBIOS: Disabled by ACPI PNP [ 0.262637] system 00:06: ioport range 0x4d0-0x4d1 has been reserved [ 0.262640] system 00:06: ioport range 0x800-0x80f has been reserved [ 0.262642] system 00:06: ioport range 0x500-0x57f has been reserved [ 0.262645] system 00:06: ioport range 0x580-0x5ff has been reserved [ 0.262647] system 00:06: ioport range 0x800-0x87f could not be reserved [ 0.262650] system 00:06: ioport range 0x880-0x8ff has been reserved [ 0.262653] system 00:06: ioport range 0xd00-0xd7f has been reserved [ 0.262655] system 00:06: ioport range 0xd80-0xdff has been reserved [ 0.262659] system 00:06: iomem range 0xfed04000-0xfed04fff has been reserved [ 0.262662] system 00:06: iomem range 0xfee01000-0xfeefffff has been reserved [ 0.262668] system 00:09: iomem range 0xfec00000-0xfec00fff could not be reserved [ 0.262671] system 00:09: iomem range 0xfee00000-0xfee00fff has been reserved [ 0.262675] system 00:0a: ioport range 0x230-0x23f has been reserved [ 0.262678] system 00:0a: ioport range 0x290-0x29f has been reserved [ 0.262680] system 00:0a: ioport range 0xa00-0xa0f has been reserved [ 0.262683] system 00:0a: ioport range 0xa10-0xa1f has been reserved [ 0.262688] system 00:0c: iomem range 0xe0000000-0xefffffff has been reserved [ 0.262693] system 00:0d: iomem range 0x0-0x9ffff could not be reserved [ 0.262695] system 00:0d: iomem range 0xc0000-0xcffff could not be reserved [ 0.262698] system 00:0d: iomem range 0xe0000-0xfffff could not be reserved [ 0.262701] system 00:0d: iomem range 0x100000-0x7fffffff could not be reserved [ 0.262704] system 00:0d: iomem range 0xfec00000-0xffffffff could not be reserved [ 0.297450] pci 0000:00:08.0: PCI bridge, secondary bus 0000:01 [ 0.297453] pci 0000:00:08.0: IO window: 0xd000-0xdfff [ 0.297457] pci 0000:00:08.0: MEM window: 0xf9f00000-0xfcffffff [ 0.297460] pci 0000:00:08.0: PREFETCH window: disabled [ 0.297464] pci 0000:00:0b.0: PCI bridge, secondary bus 0000:02 [ 0.297467] pci 0000:00:0b.0: IO window: 0xe000-0xefff [ 0.297470] pci 0000:00:0b.0: MEM window: 0xfd000000-0xfeafffff [ 0.297473] pci 0000:00:0b.0: PREFETCH window: 0x000000d6000000-0x000000dfffffff [ 0.297477] pci 0000:00:10.0: PCI bridge, secondary bus 0000:03 [ 0.297479] pci 0000:00:10.0: IO window: disabled [ 0.297488] pci 0000:00:10.0: MEM window: disabled [ 0.297495] pci 0000:00:10.0: PREFETCH window: disabled [ 0.297507] pci 0000:00:12.0: PCI bridge, secondary bus 0000:04 [ 0.297508] pci 0000:00:12.0: IO window: disabled [ 0.297518] pci 0000:00:12.0: MEM window: disabled [ 0.297524] pci 0000:00:12.0: PREFETCH window: disabled [ 0.297537] pci 0000:00:13.0: PCI bridge, secondary bus 0000:05 [ 0.297539] pci 0000:00:13.0: IO window: disabled [ 0.297548] pci 0000:00:13.0: MEM window: 0xfeb00000-0xfebfffff [ 0.297555] pci 0000:00:13.0: PREFETCH window: disabled [ 0.297573] pci 0000:00:08.0: setting latency timer to 64 [ 0.297578] pci 0000:00:0b.0: setting latency timer to 64 [ 0.297922] ACPI: PCI Interrupt Link [LN0A] enabled at IRQ 19 [ 0.297925] alloc irq_desc for 19 on node -1 [ 0.297926] alloc kstat_irqs on node -1 [ 0.297934] pci 0000:00:10.0: PCI INT A -> Link[LN0A] -> GSI 19 (level, low) -> IRQ 19 [ 0.297942] pci 0000:00:10.0: setting latency timer to 64 [ 0.298273] ACPI: PCI Interrupt Link [LN2A] enabled at IRQ 18 [ 0.298276] alloc irq_desc for 18 on node -1 [ 0.298277] alloc kstat_irqs on node -1 [ 0.298284] pci 0000:00:12.0: PCI INT A -> Link[LN2A] -> GSI 18 (level, low) -> IRQ 18 [ 0.298292] pci 0000:00:12.0: setting latency timer to 64 [ 0.298621] ACPI: PCI Interrupt Link [LN3A] enabled at IRQ 17 [ 0.298623] alloc irq_desc for 17 on node -1 [ 0.298625] alloc kstat_irqs on node -1 [ 0.298631] pci 0000:00:13.0: PCI INT A -> Link[LN3A] -> GSI 17 (level, low) -> IRQ 17 [ 0.298639] pci 0000:00:13.0: setting latency timer to 64 [ 0.298645] pci_bus 0000:00: resource 0 io: [0x00-0xffff] [ 0.298647] pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffff] [ 0.298650] pci_bus 0000:01: resource 0 io: [0xd000-0xdfff] [ 0.298652] pci_bus 0000:01: resource 1 mem: [0xf9f00000-0xfcffffff] [ 0.298654] pci_bus 0000:01: resource 3 io: [0x00-0xffff] [ 0.298656] pci_bus 0000:01: resource 4 mem: [0x000000-0xffffffff] [ 0.298659] pci_bus 0000:02: resource 0 io: [0xe000-0xefff] [ 0.298661] pci_bus 0000:02: resource 1 mem: [0xfd000000-0xfeafffff] [ 0.298663] pci_bus 0000:02: resource 2 pref mem [0xd6000000-0xdfffffff] [ 0.298666] pci_bus 0000:05: resource 1 mem: [0xfeb00000-0xfebfffff] [ 0.298698] NET: Registered protocol family 2 [ 0.298789] IP route cache hash table entries: 32768 (order: 5, 131072 bytes) [ 0.299087] TCP established hash table entries: 131072 (order: 8, 1048576 bytes) [ 0.299703] TCP bind hash table entries: 65536 (order: 7, 524288 bytes) [ 0.300008] TCP: Hash tables configured (established 131072 bind 65536) [ 0.300011] TCP reno registered [ 0.300118] NET: Registered protocol family 1 [ 0.348637] pci 0000:00:07.0: Enabling HT MSI Mapping [ 0.348736] pci 0000:00:08.0: Enabling HT MSI Mapping [ 0.348841] pci 0000:00:09.0: Enabling HT MSI Mapping [ 0.348952] pci 0000:00:0a.0: Enabling HT MSI Mapping [ 0.349062] pci 0000:00:0b.0: Enabling HT MSI Mapping [ 0.349257] pci 0000:02:00.0: Boot video device [ 0.349454] cpufreq-nforce2: No nForce2 chipset. [ 0.349477] Scanning for low memory corruption every 60 seconds [ 0.349566] audit: initializing netlink socket (disabled) [ 0.349576] type=2000 audit(1300698044.348:1): initialized [ 0.357814] highmem bounce pool size: 64 pages [ 0.357819] HugeTLB registered 4 MB page size, pre-allocated 0 pages [ 0.359190] VFS: Disk quotas dquot_6.5.2 [ 0.359241] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) [ 0.359760] fuse init (API version 7.13) [ 0.359834] msgmni has been set to 1703 [ 0.360036] alg: No test for stdrng (krng) [ 0.360087] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253) [ 0.360090] io scheduler noop registered [ 0.360092] io scheduler anticipatory registered [ 0.360094] io scheduler deadline registered [ 0.360131] io scheduler cfq registered (default) [ 0.360457] alloc irq_desc for 24 on node -1 [ 0.360459] alloc kstat_irqs on node -1 [ 0.360479] pcieport 0000:00:10.0: irq 24 for MSI/MSI-X [ 0.360525] pcieport 0000:00:10.0: setting latency timer to 64 [ 0.360895] alloc irq_desc for 25 on node -1 [ 0.360897] alloc kstat_irqs on node -1 [ 0.360913] pcieport 0000:00:12.0: irq 25 for MSI/MSI-X [ 0.360931] pcieport 0000:00:12.0: setting latency timer to 64 [ 0.361286] alloc irq_desc for 26 on node -1 [ 0.361287] alloc kstat_irqs on node -1 [ 0.361303] pcieport 0000:00:13.0: irq 26 for MSI/MSI-X [ 0.361321] pcieport 0000:00:13.0: setting latency timer to 64 [ 0.361473] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 [ 0.361493] pciehp: PCI Express Hot Plug Controller Driver version: 0.4 [ 0.361615] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0 [ 0.361620] ACPI: Power Button [PWRB] [ 0.361669] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1 [ 0.361672] ACPI: Power Button [PWRF] [ 0.362012] ACPI: processor limited to max C-state 1 [ 0.362037] processor LNXCPU:00: registered as cooling_device0 [ 0.362069] processor LNXCPU:01: registered as cooling_device1 [ 0.370284] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 0.370385] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A [ 0.370687] 00:0b: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A [ 0.371613] brd: module loaded [ 0.372031] loop: module loaded [ 0.372110] input: Macintosh mouse button emulation as /devices/virtual/input/input2 [ 0.372277] pata_acpi 0000:00:06.0: setting latency timer to 64 [ 0.372730] ACPI: PCI Interrupt Link [LSA0] enabled at IRQ 23 [ 0.372734] alloc irq_desc for 23 on node -1 [ 0.372736] alloc kstat_irqs on node -1 [ 0.372746] pata_acpi 0000:00:09.0: PCI INT A -> Link[LSA0] -> GSI 23 (level, low) -> IRQ 23 [ 0.372761] pata_acpi 0000:00:09.0: setting latency timer to 64 [ 0.372767] pata_acpi 0000:00:09.0: PCI INT A disabled [ 0.373033] Fixed MDIO Bus: probed [ 0.373063] PPP generic driver version 2.4.2 [ 0.373100] tun: Universal TUN/TAP device driver, 1.6 [ 0.373102] tun: (C) 1999-2004 Max Krasnyansky [ 0.373178] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 0.373536] ACPI: PCI Interrupt Link [LUB2] enabled at IRQ 22 [ 0.373539] alloc irq_desc for 22 on node -1 [ 0.373540] alloc kstat_irqs on node -1 [ 0.373547] ehci_hcd 0000:00:02.1: PCI INT B -> Link[LUB2] -> GSI 22 (level, low) -> IRQ 22 [ 0.373563] ehci_hcd 0000:00:02.1: setting latency timer to 64 [ 0.373566] ehci_hcd 0000:00:02.1: EHCI Host Controller [ 0.373596] ehci_hcd 0000:00:02.1: new USB bus registered, assigned bus number 1 [ 0.373627] ehci_hcd 0000:00:02.1: debug port 1 [ 0.373635] ehci_hcd 0000:00:02.1: cache line size of 64 is not supported [ 0.373658] ehci_hcd 0000:00:02.1: irq 22, io mem 0xf9e7fc00 [ 0.373704] isapnp: Scanning for PnP cards... [ 0.386983] Freeing initrd memory: 7778k freed [ 0.391255] ehci_hcd 0000:00:02.1: USB 2.0 started, EHCI 1.00 [ 0.391395] usb usb1: configuration #1 chosen from 1 choice [ 0.391424] hub 1-0:1.0: USB hub found [ 0.391435] hub 1-0:1.0: 6 ports detected [ 0.391910] ACPI: PCI Interrupt Link [UB12] enabled at IRQ 21 [ 0.391915] alloc irq_desc for 21 on node -1 [ 0.391916] alloc kstat_irqs on node -1 [ 0.391927] ehci_hcd 0000:00:04.1: PCI INT B -> Link[UB12] -> GSI 21 (level, low) -> IRQ 21 [ 0.391944] ehci_hcd 0000:00:04.1: setting latency timer to 64 [ 0.391947] ehci_hcd 0000:00:04.1: EHCI Host Controller [ 0.391983] ehci_hcd 0000:00:04.1: new USB bus registered, assigned bus number 2 [ 0.392036] ehci_hcd 0000:00:04.1: debug port 1 [ 0.392043] ehci_hcd 0000:00:04.1: cache line size of 64 is not supported [ 0.392066] ehci_hcd 0000:00:04.1: irq 21, io mem 0xf9e7f800 [ 0.404019] ehci_hcd 0000:00:04.1: USB 2.0 started, EHCI 1.00 [ 0.404080] usb usb2: configuration #1 chosen from 1 choice [ 0.404102] hub 2-0:1.0: USB hub found [ 0.404109] hub 2-0:1.0: 6 ports detected [ 0.404509] ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 16 [ 0.404511] alloc irq_desc for 16 on node -1 [ 0.404513] alloc kstat_irqs on node -1 [ 0.404520] ehci_hcd 0000:01:07.2: PCI INT C -> Link[LNKD] -> GSI 16 (level, low) -> IRQ 16 [ 0.404529] ehci_hcd 0000:01:07.2: EHCI Host Controller [ 0.404558] ehci_hcd 0000:01:07.2: new USB bus registered, assigned bus number 3 [ 0.404605] ehci_hcd 0000:01:07.2: irq 16, io mem 0xf9fffc00 [ 0.420016] ehci_hcd 0000:01:07.2: USB 2.0 started, EHCI 1.00 [ 0.420078] usb usb3: configuration #1 chosen from 1 choice [ 0.420101] hub 3-0:1.0: USB hub found [ 0.420107] hub 3-0:1.0: 2 ports detected [ 0.420153] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 0.420513] ACPI: PCI Interrupt Link [LUB0] enabled at IRQ 20 [ 0.420515] alloc irq_desc for 20 on node -1 [ 0.420517] alloc kstat_irqs on node -1 [ 0.420523] ohci_hcd 0000:00:02.0: PCI INT A -> Link[LUB0] -> GSI 20 (level, low) -> IRQ 20 [ 0.420531] ohci_hcd 0000:00:02.0: setting latency timer to 64 [ 0.420534] ohci_hcd 0000:00:02.0: OHCI Host Controller [ 0.420563] ohci_hcd 0000:00:02.0: new USB bus registered, assigned bus number 4 [ 0.420584] ohci_hcd 0000:00:02.0: irq 20, io mem 0xf9e7e000 [ 0.482060] usb usb4: configuration #1 chosen from 1 choice [ 0.482085] hub 4-0:1.0: USB hub found [ 0.482092] hub 4-0:1.0: 6 ports detected [ 0.482479] ACPI: PCI Interrupt Link [UB11] enabled at IRQ 23 [ 0.482482] ohci_hcd 0000:00:04.0: PCI INT A -> Link[UB11] -> GSI 23 (level, low) -> IRQ 23 [ 0.482489] ohci_hcd 0000:00:04.0: setting latency timer to 64 [ 0.482492] ohci_hcd 0000:00:04.0: OHCI Host Controller [ 0.482521] ohci_hcd 0000:00:04.0: new USB bus registered, assigned bus number 5 [ 0.482543] ohci_hcd 0000:00:04.0: irq 23, io mem 0xf9e7d000 [ 0.542061] usb usb5: configuration #1 chosen from 1 choice [ 0.542085] hub 5-0:1.0: USB hub found [ 0.542093] hub 5-0:1.0: 6 ports detected [ 0.542137] uhci_hcd: USB Universal Host Controller Interface driver [ 0.542503] ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 19 [ 0.542506] uhci_hcd 0000:01:07.0: PCI INT A -> Link[LNKB] -> GSI 19 (level, low) -> IRQ 19 [ 0.542513] uhci_hcd 0000:01:07.0: UHCI Host Controller [ 0.542548] uhci_hcd 0000:01:07.0: new USB bus registered, assigned bus number 6 [ 0.542579] uhci_hcd 0000:01:07.0: irq 19, io base 0x0000dc00 [ 0.542669] usb usb6: configuration #1 chosen from 1 choice [ 0.542691] hub 6-0:1.0: USB hub found [ 0.542698] hub 6-0:1.0: 2 ports detected [ 0.542777] PNP: No PS/2 controller found. Probing ports directly. [ 0.543207] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 0.543216] serio: i8042 AUX port at 0x60,0x64 irq 12 [ 0.543286] mice: PS/2 mouse device common for all mice [ 0.543378] rtc_cmos 00:08: RTC can wake from S4 [ 0.543411] rtc_cmos 00:08: rtc core: registered rtc_cmos as rtc0 [ 0.543465] rtc0: alarms up to one year, y3k, 114 bytes nvram, hpet irqs [ 0.543555] device-mapper: uevent: version 1.0.3 [ 0.543655] device-mapper: ioctl: 4.15.0-ioctl (2009-04-01) initialised: dm-devel@redhat.com [ 0.543715] device-mapper: multipath: version 1.1.0 loaded [ 0.543717] device-mapper: multipath round-robin: version 1.0.0 loaded [ 0.543817] EISA: Probing bus 0 at eisa.0 [ 0.543841] EISA: Detected 0 cards. [ 0.543907] cpuidle: using governor ladder [ 0.543909] cpuidle: using governor menu [ 0.544272] TCP cubic registered [ 0.544409] NET: Registered protocol family 10 [ 0.544801] lo: Disabled Privacy Extensions [ 0.545095] NET: Registered protocol family 17 [ 0.545124] powernow-k8: Found 1 AMD Athlon(tm) Dual Core Processor 4850e processors (2 cpu cores) (version 2.20.00) [ 0.545167] powernow-k8: 0 : fid 0x11 (2500 MHz), vid 0xe [ 0.545169] powernow-k8: 1 : fid 0x10 (2400 MHz), vid 0xf [ 0.545171] powernow-k8: 2 : fid 0xe (2200 MHz), vid 0x11 [ 0.545173] powernow-k8: 3 : fid 0xc (2000 MHz), vid 0x13 [ 0.545175] powernow-k8: 4 : fid 0xa (1800 MHz), vid 0x15 [ 0.545177] powernow-k8: 5 : fid 0x2 (1000 MHz), vid 0x16 [ 0.545214] Using IPI No-Shortcut mode [ 0.545281] PM: Resume from disk failed. [ 0.545292] registered taskstats version 1 [ 0.545880] Magic number: 3:473:20 [ 0.546011] rtc_cmos 00:08: setting system clock to 2011-03-21 09:00:44 UTC (1300698044) [ 0.546014] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found [ 0.546015] EDD information not available. [ 0.727323] isapnp: No Plug & Play device found [ 0.727347] Freeing unused kernel memory: 664k freed [ 0.727791] Write protecting the kernel text: 4692k [ 0.727823] Write protecting the kernel read-only data: 1844k [ 0.744290] udev: starting version 151 [ 0.794167] pata_amd 0000:00:06.0: version 0.4.1 [ 0.794222] pata_amd 0000:00:06.0: setting latency timer to 64 [ 0.815877] scsi0 : pata_amd [ 0.816047] usb 1-3: new high speed USB device using ehci_hcd and address 3 [ 0.821312] scsi1 : pata_amd [ 0.822955] ata1: PATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0xffa0 irq 14 [ 0.822959] ata2: PATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0xffa8 irq 15 [ 0.837503] forcedeth: Reverse Engineered nForce ethernet driver. Version 0.64. [ 0.837916] ACPI: PCI Interrupt Link [LMAC] enabled at IRQ 22 [ 0.837922] forcedeth 0000:00:0a.0: PCI INT A -> Link[LMAC] -> GSI 22 (level, low) -> IRQ 22 [ 0.837926] forcedeth 0000:00:0a.0: setting latency timer to 64 [ 0.892805] FDC 0 is a post-1991 82077 [ 0.905501] forcedeth 0000:00:0a.0: ifname eth0, PHY OUI 0x732 @ 3, addr 00:24:8c:37:9a:30 [ 0.905505] forcedeth 0000:00:0a.0: highdma csum pwrctl mgmt gbit lnktim msi desc-v3 [ 0.905534] ahci 0000:00:09.0: version 3.0 [ 0.905550] ahci 0000:00:09.0: PCI INT A -> Link[LSA0] -> GSI 23 (level, low) -> IRQ 23 [ 0.905590] alloc irq_desc for 27 on node -1 [ 0.905592] alloc kstat_irqs on node -1 [ 0.905600] ahci 0000:00:09.0: irq 27 for MSI/MSI-X [ 0.905685] ahci 0000:00:09.0: AHCI 0001.0200 32 slots 6 ports 3 Gbps 0x3f impl IDE mode [ 0.905688] ahci 0000:00:09.0: flags: 64bit ncq sntf led clo pmp pio boh [ 0.905692] ahci 0000:00:09.0: setting latency timer to 64 [ 0.906287] scsi2 : ahci [ 0.906355] scsi3 : ahci [ 0.906407] scsi4 : ahci [ 0.906477] scsi5 : ahci [ 0.906604] scsi6 : ahci [ 0.906678] scsi7 : ahci [ 0.906825] ata3: SATA max UDMA/133 abar m8192@0xf9e76000 port 0xf9e76100 irq 27 [ 0.906828] ata4: SATA max UDMA/133 abar m8192@0xf9e76000 port 0xf9e76180 irq 27 [ 0.906830] ata5: SATA max UDMA/133 abar m8192@0xf9e76000 port 0xf9e76200 irq 27 [ 0.906833] ata6: SATA max UDMA/133 abar m8192@0xf9e76000 port 0xf9e76280 irq 27 [ 0.906835] ata7: SATA max UDMA/133 abar m8192@0xf9e76000 port 0xf9e76300 irq 27 [ 0.906838] ata8: SATA max UDMA/133 abar m8192@0xf9e76000 port 0xf9e76380 irq 27 [ 0.992756] ata1.00: ATA-4: QUANTUM FIREBALLlct10 10, A03.0900, max UDMA/66 [ 0.992759] ata1.00: 20044080 sectors, multi 16: LBA [ 0.992786] ata1.01: ATAPI: _NEC DVD+RW ND-1100A, 10GE, max UDMA/33 [ 0.992807] ata1: nv_mode_filter: 0x1f39f&0x1f39f->0x1f39f, BIOS=0x1f000 (0xc5c00000) ACPI=0x1f01f (30:60:0x15) [ 0.992810] ata1.00: limited to UDMA/33 due to 40-wire cable [ 0.992814] ata1: nv_mode_filter: 0x739f&0x739f->0x739f, BIOS=0x7000 (0xc5c00000) ACPI=0x701f (30:60:0x15) [ 1.008754] ata1.00: configured for UDMA/33 [ 1.024549] ata1.01: configured for UDMA/33 [ 1.025045] scsi 0:0:0:0: Direct-Access ATA QUANTUM FIREBALL A03. PQ: 0 ANSI: 5 [ 1.025203] sd 0:0:0:0: Attached scsi generic sg0 type 0 [ 1.025270] sd 0:0:0:0: [sda] 20044080 512-byte logical blocks: (10.2 GB/9.55 GiB) [ 1.027569] scsi 0:0:1:0: CD-ROM _NEC DVD+RW ND-1100A 10GE PQ: 0 ANSI: 5 [ 1.027587] sd 0:0:0:0: [sda] Write Protect is off [ 1.027590] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 1.027610] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 1.032658] sr0: scsi3-mmc drive: 40x/40x writer cd/rw xa/form2 cdda tray [ 1.032661] Uniform CD-ROM driver Revision: 3.20 [ 1.032770] sr 0:0:1:0: Attached scsi CD-ROM sr0 [ 1.032793] sda: [ 1.032828] sr 0:0:1:0: Attached scsi generic sg1 type 5 [ 1.032895] ata2: port disabled. ignoring. [ 1.053285] sda1 sda2 sda3 sda4 [ 1.072478] sd 0:0:0:0: [sda] Attached SCSI disk [ 1.088414] usb 1-3: configuration #1 chosen from 1 choice [ 1.224140] ata7: SATA link down (SStatus 0 SControl 300) [ 1.224161] ata5: SATA link down (SStatus 0 SControl 300) [ 1.224180] ata3: SATA link down (SStatus 0 SControl 300) [ 1.228141] ata8: SATA link down (SStatus 0 SControl 300) [ 1.228155] ata6: SATA link down (SStatus 0 SControl 300) [ 1.312218] usb 3-1: new high speed USB device using ehci_hcd and address 2 [ 1.388070] ata4: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 1.389171] ata4.00: ATA-8: WDC WD10EADS-00L5B1, 01.01A01, max UDMA/133 [ 1.389174] ata4.00: 1953525168 sectors, multi 16: LBA48 NCQ (depth 31/32) [ 1.390562] ata4.00: configured for UDMA/133 [ 1.390711] scsi 3:0:0:0: Direct-Access ATA WDC WD10EADS-00L 01.0 PQ: 0 ANSI: 5 [ 1.390861] sd 3:0:0:0: [sdb] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB) [ 1.390886] sd 3:0:0:0: Attached scsi generic sg2 type 0 [ 1.391018] sd 3:0:0:0: [sdb] Write Protect is off [ 1.391021] sd 3:0:0:0: [sdb] Mode Sense: 00 3a 00 00 [ 1.391069] sd 3:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 1.391265] sdb: sdb1 sdb2 sdb3 [ 1.398684] sd 3:0:0:0: [sdb] Attached SCSI disk [ 1.401708] ohci1394 0000:05:00.0: PCI INT A -> Link[LN3A] -> GSI 17 (level, low) -> IRQ 17 [ 1.401717] ohci1394 0000:05:00.0: setting latency timer to 64 [ 1.449031] usb 3-1: configuration #1 chosen from 1 choice [ 1.457653] ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[17] MMIO=[febff800-febfffff] Max Packet=[2048] IR/IT contexts=[4/4] [ 1.752121] usb 5-1: new full speed USB device using ohci_hcd and address 2 [ 1.974159] usb 5-1: configuration #1 chosen from 1 choice [ 1.990230] usbcore: registered new interface driver hiddev [ 1.995550] input: Logitech USB Receiver as /devices/pci0000:00/0000:00:04.0/usb5/5-1/5-1:1.0/input/input3 [ 1.995641] generic-usb 0003:046D:C52E.0001: input,hidraw0: USB HID v1.11 Keyboard [Logitech USB Receiver] on usb-0000:00:04.0-1/input0 [ 2.002781] input: Logitech USB Receiver as /devices/pci0000:00/0000:00:04.0/usb5/5-1/5-1:1.1/input/input4 [ 2.002933] generic-usb 0003:046D:C52E.0002: input,hiddev96,hidraw1: USB HID v1.11 Mouse [Logitech USB Receiver] on usb-0000:00:04.0-1/input1 [ 2.002960] usbcore: registered new interface driver usbhid [ 2.002962] usbhid: v2.6:USB HID core driver [ 2.110235] EXT3-fs: INFO: recovery required on readonly filesystem. [ 2.110239] EXT3-fs: write access will be enabled during recovery. [ 2.284128] usb 4-1: new full speed USB device using ohci_hcd and address 2 [ 2.488191] usb 4-1: configuration #1 chosen from 1 choice [ 2.736844] ieee1394: Host added: ID:BUS[0-00:1023] GUID[001e8c0001c5c208] [ 7.219132] kjournald starting. Commit interval 5 seconds [ 7.219156] EXT3-fs: sda1: orphan cleanup on readonly fs [ 7.219163] ext3_orphan_cleanup: deleting unreferenced inode 246038 [ 7.219193] ext3_orphan_cleanup: deleting unreferenced inode 245942 [ 7.219201] ext3_orphan_cleanup: deleting unreferenced inode 245940 [ 7.219207] ext3_orphan_cleanup: deleting unreferenced inode 245939 [ 7.219215] ext3_orphan_cleanup: deleting unreferenced inode 245865 [ 7.219221] EXT3-fs: sda1: 5 orphan inodes deleted [ 7.219223] EXT3-fs: recovery complete. [ 7.244983] EXT3-fs: mounted filesystem with ordered data mode. [ 35.138926] udev: starting version 151 [ 35.342937] i2c i2c-0: nForce2 SMBus adapter at 0x600 [ 35.342943] ACPI: resource nForce2_smbus [0x700-0x73f] conflicts with ACPI region SM00 [0x700-0x73f] [ 35.342945] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver [ 35.342948] nForce2_smbus 0000:00:01.1: Error probing SMB2. [ 35.349259] k8temp 0000:00:18.3: Temperature readouts might be wrong - check erratum #141 [ 35.351984] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 [ 35.379899] lp: driver loaded but no devices found [ 35.419785] vga16fb: initializing [ 35.419790] vga16fb: mapped to 0xc00a0000 [ 35.419953] fb0: VGA16 VGA frame buffer device [ 35.425055] cfg80211: Calling CRDA to update world regulatory domain [ 35.465335] type=1505 audit(1300698079.418:2): operation="profile_load" pid=563 name="/sbin/dhclient3" [ 35.465360] type=1505 audit(1300698079.418:3): operation="profile_replace" pid=553 name="/sbin/dhclient3" [ 35.465574] type=1505 audit(1300698079.418:4): operation="profile_load" pid=563 name="/usr/lib/NetworkManager/nm-dhcp-client.action" [ 35.465619] type=1505 audit(1300698079.418:5): operation="profile_replace" pid=553 name="/usr/lib/NetworkManager/nm-dhcp-client.action" [ 35.465714] type=1505 audit(1300698079.418:6): operation="profile_load" pid=563 name="/usr/lib/connman/scripts/dhclient-script" [ 35.465768] type=1505 audit(1300698079.418:7): operation="profile_replace" pid=553 name="/usr/lib/connman/scripts/dhclient-script" [ 35.468950] Linux agpgart interface v0.103 [ 35.475152] type=1505 audit(1300698079.426:8): operation="profile_load" pid=675 name="/usr/sbin/ntpd" [ 35.478077] type=1505 audit(1300698079.430:9): operation="profile_replace" pid=676 name="/usr/sbin/ntpd" [ 35.542651] cfg80211: World regulatory domain updated: [ 35.542654] (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [ 35.542657] (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 35.542660] (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [ 35.542663] (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [ 35.542665] (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 35.542667] (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 35.565122] Linux video capture interface: v2.00 [ 35.565127] WARNING: You're using an experimental version of the V4L stack. As the driver [ 35.565129] is backported to an older kernel, it doesn't offer enough quality for [ 35.565130] its usage in production. [ 35.565131] Use it with care. [ 35.588535] [Firmware Bug]: ACPI(IGPU) defines _DOD but not _DOS [ 35.588780] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A03:00/device:11/LNXVIDEO:00/input/input5 [ 35.588847] ACPI: Video Device [IGPU] (multi-head: yes rom: no post: no) [ 35.594219] gspca: main v2.9.0 registered [ 35.595260] gspca: probing 046d:08d7 [ 35.596041] parport_pc 00:05: reported by Plug and Play ACPI [ 35.596090] parport0: PC-style at 0x378, irq 7 [PCSPP,TRISTATE] [ 35.633649] nvidia: module license 'NVIDIA' taints kernel. [ 35.633653] Disabling lock debugging due to kernel taint [ 35.764600] lp0: using parport0 (interrupt-driven). [ 35.778512] Console: switching to colour frame buffer device 80x30 [ 36.630440] Adding 819304k swap on /dev/sda2. Priority:-1 extents:1 across:819304k [ 36.688651] WARNING: You're using an experimental version of the DVB stack. As the driver [ 36.688653] is backported to an older kernel, it doesn't offer enough quality for [ 36.688655] its usage in production. [ 36.688655] Use it with care. [ 36.763515] ppdev: user-space parallel port driver [ 36.777466] ACPI: PCI Interrupt Link [SGRU] enabled at IRQ 21 [ 36.777473] nvidia 0000:02:00.0: PCI INT A -> Link[SGRU] -> GSI 21 (level, low) -> IRQ 21 [ 36.777482] nvidia 0000:02:00.0: setting latency timer to 64 [ 36.777487] vgaarb: device changed decodes: PCI:0000:02:00.0,olddecodes=io+mem,decodes=none:owns=io+mem [ 36.777837] NVRM: loading NVIDIA UNIX x86 Kernel Module 195.36.24 Thu Apr 22 09:18:20 PDT 2010 [ 36.821235] cx88/2: cx2388x MPEG-TS Driver Manager version 0.0.8 loaded [ 36.821630] cx88[0]: subsystem: 107d:6654, board: Leadtek WinFast DTV1800 Hybrid [card=81,autodetected], frontend(s): 1 [ 36.821633] cx88[0]: TV tuner type 71, Radio tuner type 71 [ 36.849677] IR NEC protocol handler initialized [ 36.867609] HDA Intel 0000:00:07.0: power state changed by ACPI to D0 [ 36.867647] HDA Intel 0000:00:07.0: power state changed by ACPI to D0 [ 36.867997] ACPI: PCI Interrupt Link [LAZA] enabled at IRQ 20 [ 36.868006] HDA Intel 0000:00:07.0: PCI INT A -> Link[LAZA] -> GSI 20 (level, low) -> IRQ 20 [ 36.868009] hda_intel: Disable MSI for Nvidia chipset [ 36.868037] HDA Intel 0000:00:07.0: setting latency timer to 64 [ 36.878561] phy0 -> rt2500usb_init_eeprom: Error - Invalid RT chipset detected. [ 36.878905] phy0 -> rt2x00lib_probe_dev: Error - Failed to allocate device. [ 36.879226] usbcore: registered new interface driver rt2500usb [ 36.880534] cx88/0: cx2388x v4l2 driver version 0.0.8 loaded [ 36.921200] cx2388x alsa driver version 0.0.8 loaded [ 36.951271] EXT3 FS on sda1, internal journal [ 37.100860] tuner 1-0061: chip found @ 0xc2 (cx88[0]) [ 37.138128] IR RC5(x) protocol handler initialized [ 37.144033] zc3xx: probe 2wr ov vga 0x0000 [ 37.153612] IR RC6 protocol handler initialized [ 37.154955] phy1: Selected rate control algorithm 'minstrel' [ 37.155629] Registered led device: rt73usb-phy1::radio [ 37.155644] Registered led device: rt73usb-phy1::assoc [ 37.155658] Registered led device: rt73usb-phy1::quality [ 37.156102] usbcore: registered new interface driver rt73usb [ 37.170652] xc2028 1-0061: creating new instance [ 37.170657] xc2028 1-0061: type set to XCeive xc2028/xc3028 tuner [ 37.170663] xc2028 1-0061: destroying instance [ 37.170734] xc2028 1-0061: creating new instance [ 37.170736] xc2028 1-0061: type set to XCeive xc2028/xc3028 tuner [ 37.170738] cx88[0]: Asking xc2028/3028 to load firmware xc3028-v27.fw [ 37.172699] IR JVC protocol handler initialized [ 37.195212] IR Sony protocol handler initialized [ 37.212037] zc3xx: probe sensor -> 0011 [ 37.212040] zc3xx: Find Sensor HV7131R(c) [ 37.218105] input: zc3xx as /devices/pci0000:00/0000:00:02.0/usb4/4-1/input/input6 [ 37.218187] gspca: video0 created [ 37.218190] gspca: found int in endpoint: 0x82, buffer_len=8, interval=10 [ 37.218206] gspca: 046d:08d7 bad interface 1 [ 37.218216] gspca: 046d:08d7 bad interface 2 [ 37.218240] usbcore: registered new interface driver zc3xx [ 37.218242] zc3xx: registered [ 37.243371] kjournald starting. Commit interval 5 seconds [ 37.243385] EXT3-fs warning: maximal mount count reached, running e2fsck is recommended [ 37.244959] EXT3 FS on sdb1, internal journal [ 37.244963] EXT3-fs: recovery complete. [ 37.245138] EXT3-fs: mounted filesystem with ordered data mode. [ 37.252640] Registered IR keymap rc-winfast [ 37.252740] input: cx88 IR (Leadtek WinFast DTV180 as /devices/pci0000:00/0000:00:08.0/0000:01:06.2/rc/rc0/input7 [ 37.252796] rc0: cx88 IR (Leadtek WinFast DTV180 as /devices/pci0000:00/0000:00:08.0/0000:01:06.2/rc/rc0 [ 37.252800] cx88[0]/2: cx2388x 8802 Driver Manager [ 37.253229] ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 18 [ 37.253234] cx88-mpeg driver manager 0000:01:06.2: PCI INT A -> Link[LNKA] -> GSI 18 (level, low) -> IRQ 18 [ 37.253245] cx88[0]/2: found at 0000:01:06.2, rev: 5, irq: 18, latency: 64, mmio: 0xfc000000 [ 37.253252] IRQ 18/cx88[0]: IRQF_DISABLED is not guaranteed on shared IRQs [ 37.253328] cx8800 0000:01:06.0: PCI INT A -> Link[LNKA] -> GSI 18 (level, low) -> IRQ 18 [ 37.253338] cx88[0]/0: found at 0000:01:06.0, rev: 5, irq: 18, latency: 64, mmio: 0xfa000000 [ 37.253351] IRQ 18/cx88[0]: IRQF_DISABLED is not guaranteed on shared IRQs [ 37.253432] cx88[0]/0: registered device video1 [v4l2] [ 37.253457] cx88[0]/0: registered device vbi0 [ 37.253482] cx88[0]/0: registered device radio0 [ 37.253569] cx88-mpeg driver manager 0000:01:06.2: firmware: requesting xc3028-v27.fw [ 37.291360] usbcore: registered new interface driver snd-usb-audio [ 37.301468] xc2028 1-0061: Loading 80 firmware images from xc3028-v27.fw, type: xc2028 firmware, ver 2.7 [ 37.301581] cx88[0]: Calling XC2028/3028 callback [ 37.302645] kjournald starting. Commit interval 5 seconds [ 37.302660] EXT3-fs warning: maximal mount count reached, running e2fsck is recommended [ 37.302960] EXT3 FS on sdb2, internal journal [ 37.302963] EXT3-fs: recovery complete. [ 37.303090] EXT3-fs: mounted filesystem with ordered data mode. [ 37.341148] kjournald starting. Commit interval 5 seconds [ 37.341161] EXT3-fs warning: maximal mount count reached, running e2fsck is recommended [ 37.341284] EXT3 FS on sdb3, internal journal [ 37.341287] EXT3-fs: recovery complete. [ 37.341393] EXT3-fs: mounted filesystem with ordered data mode. [ 37.375004] dvb-usb: found a 'Leadtek WinFast DTV2000DS' in warm state. [ 37.375060] dvb-usb: will pass the complete MPEG2 transport stream to the software demuxer. [ 37.375557] DVB: registering new adapter (Leadtek WinFast DTV2000DS) [ 37.450376] xc2028 1-0061: Loading firmware for type=BASE (1), id 0000000000000000. [ 37.450380] cx88[0]: Calling XC2028/3028 callback [ 37.490433] rt73usb 1-3:1.0: firmware: requesting rt73.bin [ 37.492845] cx88/2: cx2388x dvb driver version 0.0.8 loaded [ 37.492849] cx88/2: registering cx8802 driver, type: dvb access: shared [ 37.492852] cx88[0]/2: subsystem: 107d:6654, board: Leadtek WinFast DTV1800 Hybrid [card=81] [ 37.492855] cx88[0]/2: cx2388x based DVB/ATSC card [ 37.492857] cx8802_alloc_frontends() allocating 1 frontend(s) [ 37.522379] type=1505 audit(1300698081.474:10): operation="profile_replace" pid=916 name="/sbin/dhclient3" [ 37.522901] type=1505 audit(1300698081.474:11): operation="profile_replace" pid=916 name="/usr/lib/NetworkManager/nm-dhcp-client.action" [ 37.597058] xc2028 1-0061: attaching existing instance [ 37.597062] xc2028 1-0061: type set to XCeive xc2028/xc3028 tuner [ 37.690301] af9013: firmware version:4.95.0 [ 37.693561] DVB: registering adapter 0 frontend 0 (Afatech AF9013 DVB-T)... [ 37.700079] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:07.0/input/input8 [ 37.873421] ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 37.875527] alloc irq_desc for 28 on node -1 [ 37.875531] alloc kstat_irqs on node -1 [ 37.875544] forcedeth 0000:00:0a.0: irq 28 for MSI/MSI-X [ 37.875759] eth0: no link during initialization. [ 37.876224] ADDRCONF(NETDEV_UP): eth0: link is not ready [ 38.258081] tda18271 2-00c0: creating new instance [ 38.263797] TDA18271HD/C2 detected @ 2-00c0 [ 38.333089] CPU0 attaching NULL sched-domain. [ 38.333096] CPU1 attaching NULL sched-domain.