Hi,

I have reached one problem with jffs2 fs ecc tested by nandsim on Microblaze.

I am getting the fault like this.
# md5sum /mnt/delete.png
uncorrectable error :
uncorrectable error :
uncorrectable error :
uncorrectable error :
uncorrectable error :
mtd->read(0xcda bytes from 0xc044) returned ECC error
Data CRC 3bcfd461 != calculated CRC e6038cde for node at 0000c000
uncorrectable error :
uncorrectable error :
uncorrectable error :
uncorrectable error :
uncorrectable error :
mtd->read(0xcda bytes from 0xc044) returned ECC error
Data CRC 3bcfd461 != calculated CRC e6038cde for node at 0000c000


The main problem is that there is one address with is not aligned which caused 
that ecc counting uses wrong data.

I also found in nand_ecc code that there is written
"It is assumed that the buffers are aligned." which is definitely wrong for my 
case. I expect that it is 4B alignment.

I generated jffs2 filesystem by the following command (mkfs.jffs2 revision 1.60)
mkfs.jffs2 -n -b -e 16KiB -t -d <folder> -o test.jffs2

test.jffs2 is also attached.

I use these command to mounted:
flash_eraseall /dev/mtd0
nandwrite -p /dev/mtd0 /var/ftp/test.jffs2
mount -t jffs2 mtd:"NAND simulator partition 0" /mnt

After enable some jffs2 debug message I have got the log.

[JFFS2 DBG] (74) jffs2_add_tn_to_tree: insert fragment 0x00-0x1000, ver 1 at 
00000900
[JFFS2 DBG] (74) jffs2_lookup_tn: root c0c37df8, offset 0
[JFFS2 DBG] (74) jffs2_add_tn_to_tree: 'this' found 0x1000-0x2000 (data)
[JFFS2 DBG] (74) jffs2_add_tn_to_tree: Ponder this ver 2, 0x1000-0x1000
[JFFS2 DBG] (74) read_dnode: After adding ver 1:
[JFFS2 DBG] (74) read_dnode: c78432c0: v 1 r 0x0-0x1000 ov 0
[JFFS2 DBG] (74) read_dnode: c78432e0: v 2 r 0x1000-0x2000 ov 0
[JFFS2 DBG] (74) read_dnode: c7843300: v 3 r 0x2000-0x3000 ov 0
[JFFS2 DBG] (74) read_dnode: c7843320: v 4 r 0x3000-0x364a ov 0
[JFFS2 DBG] (74) read_dnode: c7843340: v 5 r 0x364a-0x4000 ov 0
[JFFS2 DBG] (74) read_dnode: c7843360: v 6 r 0x4000-0x5000 ov 0
[JFFS2 DBG] (74) read_dnode: c7843380: v 7 r 0x5000-0x6000 ov 0
[JFFS2 DBG] (74) read_dnode: c78433a0: v 8 r 0x6000-0x7000 ov 0
[JFFS2 DBG] (74) read_dnode: c78433c0: v 9 r 0x7000-0x7316 ov 0


You see that tn->fn->ofs which is 0x364a which is not aligned. This offset is 
causing

I also tried to disable zlib compression which caused that map has changed and 
it is aligned and there is no problem with ECC computing.
mkfs.jffs2 -n -b -e 16KiB -t -d <folder> -o test-nozlib.jffs2 -x zlib

Have you ever seen this fault with alignment?
I think that the problem is with test.jffs2 generation.
Is there any option to setup that everything is aligned?
Or are you aware about any workaround how to prevent this fault?

I do some testing directly on Microblaze. Generate random files and test them 
and I haven't seen any problem when target read/write data from jffs2 on nand 
with ecc. The problem is only with test.jffs2 generated on host I see this fault.

Thanks,
Michal

-- 
Michal Simek, Ing. (M.Eng)
PetaLogix - Linux Solutions for a Reconfigurable World
w: www.petalogix.com p: +61-7-30090663,+42-0-721842854 f: +61-7-30090663