* [U-Boot] [GIT PULL] Pull request: u-boot-imx
@ 2011-06-30 9:38 Stefano Babic
2011-06-30 10:52 ` Albert ARIBAUD
0 siblings, 1 reply; 116+ messages in thread
From: Stefano Babic @ 2011-06-30 9:38 UTC (permalink / raw)
To: u-boot
Hi Albert,
please pull from u-boot-imx.
The following changes since commit 385d2e0e93ca09fa9f763053afd03076b317228f:
arm: Update jadecpu board (2011-06-29 20:25:06 +0200)
are available in the git repository at:
git://www.denx.de/git/u-boot-imx.git master
Fabio Estevam (5):
MX5: Make the weim structure complete
MX5: Add iomux structure
MX5: Introduce a function for setting the chip select size
MX53: Add initial support for MX53ARD
vision2: Fix build due to WEIM registers name change
MAINTAINERS | 1 +
arch/arm/cpu/armv7/mx5/soc.c | 30 +++
arch/arm/include/asm/arch-mx5/imx-regs.h | 159 ++++++++++++++-
arch/arm/include/asm/arch-mx5/sys_proto.h | 2 +-
board/freescale/mx53ard/Makefile | 48 +++++
board/freescale/mx53ard/imximage_dd3.cfg | 96 +++++++++
board/freescale/mx53ard/mx53ard.c | 306
+++++++++++++++++++++++++++++
board/ttcontrol/vision2/vision2.c | 10 +-
boards.cfg | 1 +
include/configs/mx53ard.h | 198 +++++++++++++++++++
10 files changed, 839 insertions(+), 12 deletions(-)
create mode 100644 board/freescale/mx53ard/Makefile
create mode 100644 board/freescale/mx53ard/imximage_dd3.cfg
create mode 100644 board/freescale/mx53ard/mx53ard.c
create mode 100644 include/configs/mx53ard.h
Best regards,
Stefano
--
=====================================================================
DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: +49-8142-66989-0 Fax: +49-8142-66989-80 Email: office at denx.de
=====================================================================
^ permalink raw reply [flat|nested] 116+ messages in thread
* [U-Boot] [GIT PULL] Pull request: u-boot-imx
2011-06-30 9:38 [U-Boot] [GIT PULL] Pull request: u-boot-imx Stefano Babic
@ 2011-06-30 10:52 ` Albert ARIBAUD
0 siblings, 0 replies; 116+ messages in thread
From: Albert ARIBAUD @ 2011-06-30 10:52 UTC (permalink / raw)
To: u-boot
Hi Stefano,
Le 30/06/2011 11:38, Stefano Babic a ?crit :
> Hi Albert,
>
> please pull from u-boot-imx.
>
> The following changes since commit 385d2e0e93ca09fa9f763053afd03076b317228f:
>
> arm: Update jadecpu board (2011-06-29 20:25:06 +0200)
>
> are available in the git repository at:
> git://www.denx.de/git/u-boot-imx.git master
>
> Fabio Estevam (5):
> MX5: Make the weim structure complete
> MX5: Add iomux structure
> MX5: Introduce a function for setting the chip select size
> MX53: Add initial support for MX53ARD
> vision2: Fix build due to WEIM registers name change
>
> MAINTAINERS | 1 +
> arch/arm/cpu/armv7/mx5/soc.c | 30 +++
> arch/arm/include/asm/arch-mx5/imx-regs.h | 159 ++++++++++++++-
> arch/arm/include/asm/arch-mx5/sys_proto.h | 2 +-
> board/freescale/mx53ard/Makefile | 48 +++++
> board/freescale/mx53ard/imximage_dd3.cfg | 96 +++++++++
> board/freescale/mx53ard/mx53ard.c | 306
> +++++++++++++++++++++++++++++
> board/ttcontrol/vision2/vision2.c | 10 +-
> boards.cfg | 1 +
> include/configs/mx53ard.h | 198 +++++++++++++++++++
> 10 files changed, 839 insertions(+), 12 deletions(-)
> create mode 100644 board/freescale/mx53ard/Makefile
> create mode 100644 board/freescale/mx53ard/imximage_dd3.cfg
> create mode 100644 board/freescale/mx53ard/mx53ard.c
> create mode 100644 include/configs/mx53ard.h
Applied to u-boot-arm/master, thanks.
> Best regards,
> Stefano
Amicalement,
--
Albert.
^ permalink raw reply [flat|nested] 116+ messages in thread
* [U-Boot] [GIT PULL] Pull request: u-boot-imx
2012-09-28 15:39 Stefano Babic
@ 2012-09-29 9:48 ` Albert ARIBAUD
0 siblings, 0 replies; 116+ messages in thread
From: Albert ARIBAUD @ 2012-09-29 9:48 UTC (permalink / raw)
To: u-boot
Hi Stefano,
On Fri, 28 Sep 2012 17:39:24 +0200, Stefano Babic <sbabic@denx.de>
wrote:
> Hi Albert,
>
> some fixes for the release. Please pull from u-boot-imx, thanks.
>
> The following changes since commit 1d9b033269263a69f7402f508c17b242fc7fea43:
>
> mx35pdk: README: Remove NAND references (2012-09-17 13:17:17 +0200)
>
> are available in the git repository at:
>
> git://www.denx.de/git/u-boot-imx.git master
>
> for you to fetch changes up to 7577a4b3c27af9ad21a4aedf732754ae96225448:
>
> mx28evk: Add missing 'setexpr' command (2012-09-24 11:00:08 +0200)
>
> ----------------------------------------------------------------
> Beno?t Th?baudeau (2):
> mx51evk: Add CONFIG_REVISION_TAG
> KARO TX25: Fix NAND Flash R/W cycle times
>
> Eric Nelson (2):
> i.MX: mxc_ipuv3_fb: add ipuv3_fb_shutdown() routine to stop IPU
> frame buffer
> i.MX: shut down video before launch of O/S
>
> Fabio Estevam (1):
> mx28evk: Remove fecmxc_mii_postcall()
>
> Otavio Salvador (1):
> mx28evk: Add missing 'setexpr' command
>
> arch/arm/imx-common/cpu.c | 9 +++++++++
> arch/arm/include/asm/arch-mx5/imx-regs.h | 2 ++
> board/freescale/mx28evk/mx28evk.c | 25 -------------------------
> board/freescale/mx51evk/mx51evk.c | 8 ++++++++
> board/karo/tx25/lowlevel_init.S | 8 ++++++++
> drivers/video/mxc_ipuv3_fb.c | 20 ++++++++++++++++++++
> include/configs/mx28evk.h | 1 +
> include/configs/mx51evk.h | 1 +
> include/ipu_pixfmt.h | 1 +
> 9 files changed, 50 insertions(+), 25 deletions(-)
>
>
Applied to u-boot-arm/master, thanks!
Amicalement,
--
Albert.
^ permalink raw reply [flat|nested] 116+ messages in thread
* [U-Boot] [GIT PULL] Pull request: u-boot-imx
@ 2012-09-28 15:39 Stefano Babic
2012-09-29 9:48 ` Albert ARIBAUD
0 siblings, 1 reply; 116+ messages in thread
From: Stefano Babic @ 2012-09-28 15:39 UTC (permalink / raw)
To: u-boot
Hi Albert,
some fixes for the release. Please pull from u-boot-imx, thanks.
The following changes since commit 1d9b033269263a69f7402f508c17b242fc7fea43:
mx35pdk: README: Remove NAND references (2012-09-17 13:17:17 +0200)
are available in the git repository at:
git://www.denx.de/git/u-boot-imx.git master
for you to fetch changes up to 7577a4b3c27af9ad21a4aedf732754ae96225448:
mx28evk: Add missing 'setexpr' command (2012-09-24 11:00:08 +0200)
----------------------------------------------------------------
Beno?t Th?baudeau (2):
mx51evk: Add CONFIG_REVISION_TAG
KARO TX25: Fix NAND Flash R/W cycle times
Eric Nelson (2):
i.MX: mxc_ipuv3_fb: add ipuv3_fb_shutdown() routine to stop IPU
frame buffer
i.MX: shut down video before launch of O/S
Fabio Estevam (1):
mx28evk: Remove fecmxc_mii_postcall()
Otavio Salvador (1):
mx28evk: Add missing 'setexpr' command
arch/arm/imx-common/cpu.c | 9 +++++++++
arch/arm/include/asm/arch-mx5/imx-regs.h | 2 ++
board/freescale/mx28evk/mx28evk.c | 25 -------------------------
board/freescale/mx51evk/mx51evk.c | 8 ++++++++
board/karo/tx25/lowlevel_init.S | 8 ++++++++
drivers/video/mxc_ipuv3_fb.c | 20 ++++++++++++++++++++
include/configs/mx28evk.h | 1 +
include/configs/mx51evk.h | 1 +
include/ipu_pixfmt.h | 1 +
9 files changed, 50 insertions(+), 25 deletions(-)
--
=====================================================================
DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: +49-8142-66989-53 Fax: +49-8142-66989-80 Email: sbabic at denx.de
=====================================================================
^ permalink raw reply [flat|nested] 116+ messages in thread
* [U-Boot] [GIT PULL] Pull request: u-boot-imx
2012-09-17 13:53 Stefano Babic
@ 2012-09-20 22:46 ` Albert ARIBAUD
0 siblings, 0 replies; 116+ messages in thread
From: Albert ARIBAUD @ 2012-09-20 22:46 UTC (permalink / raw)
To: u-boot
Hi Stefano,
On Mon, 17 Sep 2012 15:53:54 +0200, Stefano Babic <sbabic@denx.de>
wrote:
> Hi Albert,
>
> please pull from u-boot-imx, thanks.
>
> The following changes since commit
> a9f1a4893364ddbb8b7942cded91d4c17c4f5948:
>
> lsxl: support power switch (2012-09-03 17:48:51 +0530)
>
> are available in the git repository at:
>
> git://www.denx.de/git/u-boot-imx.git master
>
> for you to fetch changes up to
> 1d9b033269263a69f7402f508c17b242fc7fea43:
>
> mx35pdk: README: Remove NAND references (2012-09-17 13:17:17 +0200)
>
> ----------------------------------------------------------------
> Ashok Kumar Reddy (2):
> ima3-mx53:Rename CONFIG_PRIME => CONFIG_ETHPRME, remove
> mx6qsabrelite:Use IMX_GPIO_NR Macro
>
> Beno?t Th?baudeau (8):
> mx35: Fix decode_pll
> mx35: Add definitions for clock gate values
> mx35: Fix clock dividers
> mx25: Define default SoC input clock frequencies
> mx35: Define default SoC input clock frequencies
> mx35 timer: Switch to 32-kHz source
> Fix mx31_decode_pll
> mx31: Define default SoC input clock frequencies
>
> Fabio Estevam (3):
> mx28evk: Convert to mxs_adjust_memory_params()
> mx28evk: Add USB Ethernet support
> mx35pdk: README: Remove NAND references
>
> Marek Vasut (7):
> M28: Fix the use of gpmi-nand in mtdparts
> MX28: Cleanup mxsboot within make mrproper
> MX28: Fixup the ad-hoc use of DIGCTL_MICROSECONDS
> SCSPS1: Enable caches
> MX28: SPI: Fix the DMA DCache race condition
> MX28: SPI: Fix the DMA chaining
> MX28: MMC: Avoid DMA DCache race condition
>
> Matt Sealey (1):
> efikamx: refine USB support
>
> Otavio Salvador (3):
> MX28: mx28evk: Align SSP clock speed
> MX28: mx28evk: Enable SPI DMA
> mx28evk: extend default environment
>
> Stefano Babic (3):
> MX: set a common place to share code for Freescale i.MX
> MX35: mx35pdk: add support for MMC
> MX6: drop binary constants from iomux header
>
> Makefile | 8 +-
> arch/arm/cpu/arm1136/mx31/generic.c | 12 +-
> arch/arm/cpu/arm1136/mx31/timer.c | 16 +--
> arch/arm/cpu/arm1136/mx35/generic.c | 90
> ++++++-------- arch/arm/cpu/arm1136/mx35/timer.c |
> 46 +++++--- arch/arm/cpu/arm926ejs/mx25/generic.c | 2
> +- arch/arm/cpu/arm926ejs/mx25/timer.c | 16 +--
> arch/arm/cpu/arm926ejs/mxs/spl_boot.c | 8 +-
> arch/arm/{cpu/armv7 => }/imx-common/Makefile | 4 +-
> arch/arm/{cpu/armv7 => }/imx-common/cmd_bmode.c | 0
> arch/arm/{cpu/armv7 => }/imx-common/cpu.c | 0
> .../imx-common/i2c.c => imx-common/i2c-mxv7.c} | 0
> arch/arm/{cpu/armv7 => }/imx-common/iomux-v3.c | 0
> arch/arm/{cpu/armv7 => }/imx-common/speed.c | 0
> arch/arm/{cpu/armv7 => }/imx-common/timer.c | 0
> arch/arm/include/asm/arch-mx25/clock.h | 14 +++
> arch/arm/include/asm/arch-mx31/clock.h | 14 +++
> arch/arm/include/asm/arch-mx35/clock.h | 14 +++
> arch/arm/include/asm/arch-mx35/crm_regs.h | 48 +++-----
> arch/arm/include/asm/arch-mx6/iomux.h | 124
> ++++++++++----------
> board/freescale/mx28evk/iomux.c | 2 +-
> board/freescale/mx28evk/mx28evk.c | 4 +-
> board/freescale/mx35pdk/README | 78
> +----------- board/freescale/mx35pdk/mx35pdk.c |
> 25 ++++ board/freescale/mx6qsabrelite/mx6qsabrelite.c | 24 ++--
> board/genesi/mx51_efikamx/Makefile | 6 +-
> board/genesi/mx51_efikamx/efikamx-usb.c | 12 ++
> board/genesi/mx51_efikamx/efikamx.c | 3 -
> drivers/mmc/mxsmmc.c | 4 +
> drivers/spi/mxs_spi.c | 58 +++++----
> include/configs/flea3.h | 1 -
> include/configs/ima3-mx53.h | 3 +-
> include/configs/imx31_litekit.h | 1 -
> include/configs/imx31_phycore.h | 1 -
> include/configs/m28evk.h | 4 +-
> include/configs/mx25pdk.h | 1 -
> include/configs/mx28evk.h | 86
> ++++++++++++-- include/configs/mx31ads.h
> | 2 - include/configs/mx31pdk.h | 2 -
> include/configs/mx35pdk.h | 18 ++-
> include/configs/qong.h | 2 -
> include/configs/sc_sps_1.h | 2 -
> include/configs/tt01.h | 2 -
> include/configs/zmx25.h | 1 -
> 44 files changed, 409 insertions(+), 349 deletions(-)
> rename arch/arm/{cpu/armv7 => }/imx-common/Makefile (94%)
> rename arch/arm/{cpu/armv7 => }/imx-common/cmd_bmode.c (100%)
> rename arch/arm/{cpu/armv7 => }/imx-common/cpu.c (100%)
> rename arch/arm/{cpu/armv7/imx-common/i2c.c => imx-common/i2c-mxv7.c}
> (100%)
> rename arch/arm/{cpu/armv7 => }/imx-common/iomux-v3.c (100%)
> rename arch/arm/{cpu/armv7 => }/imx-common/speed.c (100%)
> rename arch/arm/{cpu/armv7 => }/imx-common/timer.c (100%)
>
>
Applied to u-boot-arm/master, thanks!
Amicalement,
--
Albert.
^ permalink raw reply [flat|nested] 116+ messages in thread
* [U-Boot] [GIT PULL] Pull request: u-boot-imx
@ 2012-09-17 13:53 Stefano Babic
2012-09-20 22:46 ` Albert ARIBAUD
0 siblings, 1 reply; 116+ messages in thread
From: Stefano Babic @ 2012-09-17 13:53 UTC (permalink / raw)
To: u-boot
Hi Albert,
please pull from u-boot-imx, thanks.
The following changes since commit a9f1a4893364ddbb8b7942cded91d4c17c4f5948:
lsxl: support power switch (2012-09-03 17:48:51 +0530)
are available in the git repository at:
git://www.denx.de/git/u-boot-imx.git master
for you to fetch changes up to 1d9b033269263a69f7402f508c17b242fc7fea43:
mx35pdk: README: Remove NAND references (2012-09-17 13:17:17 +0200)
----------------------------------------------------------------
Ashok Kumar Reddy (2):
ima3-mx53:Rename CONFIG_PRIME => CONFIG_ETHPRME, remove
mx6qsabrelite:Use IMX_GPIO_NR Macro
Beno?t Th?baudeau (8):
mx35: Fix decode_pll
mx35: Add definitions for clock gate values
mx35: Fix clock dividers
mx25: Define default SoC input clock frequencies
mx35: Define default SoC input clock frequencies
mx35 timer: Switch to 32-kHz source
Fix mx31_decode_pll
mx31: Define default SoC input clock frequencies
Fabio Estevam (3):
mx28evk: Convert to mxs_adjust_memory_params()
mx28evk: Add USB Ethernet support
mx35pdk: README: Remove NAND references
Marek Vasut (7):
M28: Fix the use of gpmi-nand in mtdparts
MX28: Cleanup mxsboot within make mrproper
MX28: Fixup the ad-hoc use of DIGCTL_MICROSECONDS
SCSPS1: Enable caches
MX28: SPI: Fix the DMA DCache race condition
MX28: SPI: Fix the DMA chaining
MX28: MMC: Avoid DMA DCache race condition
Matt Sealey (1):
efikamx: refine USB support
Otavio Salvador (3):
MX28: mx28evk: Align SSP clock speed
MX28: mx28evk: Enable SPI DMA
mx28evk: extend default environment
Stefano Babic (3):
MX: set a common place to share code for Freescale i.MX
MX35: mx35pdk: add support for MMC
MX6: drop binary constants from iomux header
Makefile | 8 +-
arch/arm/cpu/arm1136/mx31/generic.c | 12 +-
arch/arm/cpu/arm1136/mx31/timer.c | 16 +--
arch/arm/cpu/arm1136/mx35/generic.c | 90 ++++++--------
arch/arm/cpu/arm1136/mx35/timer.c | 46 +++++---
arch/arm/cpu/arm926ejs/mx25/generic.c | 2 +-
arch/arm/cpu/arm926ejs/mx25/timer.c | 16 +--
arch/arm/cpu/arm926ejs/mxs/spl_boot.c | 8 +-
arch/arm/{cpu/armv7 => }/imx-common/Makefile | 4 +-
arch/arm/{cpu/armv7 => }/imx-common/cmd_bmode.c | 0
arch/arm/{cpu/armv7 => }/imx-common/cpu.c | 0
.../imx-common/i2c.c => imx-common/i2c-mxv7.c} | 0
arch/arm/{cpu/armv7 => }/imx-common/iomux-v3.c | 0
arch/arm/{cpu/armv7 => }/imx-common/speed.c | 0
arch/arm/{cpu/armv7 => }/imx-common/timer.c | 0
arch/arm/include/asm/arch-mx25/clock.h | 14 +++
arch/arm/include/asm/arch-mx31/clock.h | 14 +++
arch/arm/include/asm/arch-mx35/clock.h | 14 +++
arch/arm/include/asm/arch-mx35/crm_regs.h | 48 +++-----
arch/arm/include/asm/arch-mx6/iomux.h | 124
++++++++++----------
board/freescale/mx28evk/iomux.c | 2 +-
board/freescale/mx28evk/mx28evk.c | 4 +-
board/freescale/mx35pdk/README | 78 +-----------
board/freescale/mx35pdk/mx35pdk.c | 25 ++++
board/freescale/mx6qsabrelite/mx6qsabrelite.c | 24 ++--
board/genesi/mx51_efikamx/Makefile | 6 +-
board/genesi/mx51_efikamx/efikamx-usb.c | 12 ++
board/genesi/mx51_efikamx/efikamx.c | 3 -
drivers/mmc/mxsmmc.c | 4 +
drivers/spi/mxs_spi.c | 58 +++++----
include/configs/flea3.h | 1 -
include/configs/ima3-mx53.h | 3 +-
include/configs/imx31_litekit.h | 1 -
include/configs/imx31_phycore.h | 1 -
include/configs/m28evk.h | 4 +-
include/configs/mx25pdk.h | 1 -
include/configs/mx28evk.h | 86 ++++++++++++--
include/configs/mx31ads.h | 2 -
include/configs/mx31pdk.h | 2 -
include/configs/mx35pdk.h | 18 ++-
include/configs/qong.h | 2 -
include/configs/sc_sps_1.h | 2 -
include/configs/tt01.h | 2 -
include/configs/zmx25.h | 1 -
44 files changed, 409 insertions(+), 349 deletions(-)
rename arch/arm/{cpu/armv7 => }/imx-common/Makefile (94%)
rename arch/arm/{cpu/armv7 => }/imx-common/cmd_bmode.c (100%)
rename arch/arm/{cpu/armv7 => }/imx-common/cpu.c (100%)
rename arch/arm/{cpu/armv7/imx-common/i2c.c => imx-common/i2c-mxv7.c}
(100%)
rename arch/arm/{cpu/armv7 => }/imx-common/iomux-v3.c (100%)
rename arch/arm/{cpu/armv7 => }/imx-common/speed.c (100%)
rename arch/arm/{cpu/armv7 => }/imx-common/timer.c (100%)
--
=====================================================================
DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: +49-8142-66989-53 Fax: +49-8142-66989-80 Email: sbabic at denx.de
=====================================================================
^ permalink raw reply [flat|nested] 116+ messages in thread
* [U-Boot] [GIT PULL] Pull request: u-boot-imx
2012-08-27 6:41 Stefano Babic
@ 2012-09-01 12:57 ` Albert ARIBAUD
0 siblings, 0 replies; 116+ messages in thread
From: Albert ARIBAUD @ 2012-09-01 12:57 UTC (permalink / raw)
To: u-boot
Hi Stefano,
On Mon, 27 Aug 2012 08:41:16 +0200, Stefano Babic <sbabic@denx.de>
wrote:
> Hi Albert,
>
> please pull from u-boot-imx, thanks.
>
> The following changes since commit
> 5f50310588e87f2ff501992564d1b05df71419f4:
>
> davinci, c6x: Always use C version of reset code (2012-08-25
> 13:40:03 +0200)
>
> are available in the git repository at:
>
> git://www.denx.de/git/u-boot-imx.git master
>
> for you to fetch changes up to
> ff1728c902587c2dc76869a30a32013ef005b84a:
>
> mxs: Convert timeout parameter to 'unsigned int' (2012-08-27
> 08:28:01 +0200)
>
> ----------------------------------------------------------------
> Ashok Kumar Reddy (1):
> mx6qarm2:Use IMX_GPIO_NR macro
>
> Beno?t Th?baudeau (17):
> mxc_spi: Round up clock divider
> mx25: Enable dcache
> mx5: Enable dcache
> mx35: Fix typo on EDIO
> mx3: Fix typo on IPU_CONF_CSI_EN
> mx5/6 timer: Round up tick_to_time() value
> mx5: cosmetic: Clean up lowlevel_init
> mx35: Remove duplicate GPIO3_BASE_ADDR
> mx5/6: Fix cpu_mmc_init() return value
> mx35: Add cpu_mmc_init()
> mx5: Undeclare imx_decode_pll()
> mx35 iomux: Remove unused macro
> mx35: Fix broken pin definitions
> mx35: Remove declaration of non-existing function
> mx35: Move clock enums to clock.h
> mx35: Remove declaration of non-existing function
> mxc: Make gpio_get_value() use PSR
>
> Fabio Estevam (7):
> m28evk: Turn on caches
> apx4devkit: Turn on caches
> mx28evk: Remove unneeded 'undef'
> mxs: Use correct function name to initialize dram
> mx53loco: Use IMX_GPIO_NR macro
> mx51evk: Use IMX_GPIO_NR macro
> mx53ard: Use IMX_GPIO_NR macro
>
> Marek Vasut (7):
> MX28: Drop the cp15 reconfiguration from SPL
> MX28: Shuffle around the power management code
> MX28: DMA: Align the struct mxs_dma_desc
> MX28: DMA: Prolong the DMA timeout
> MX28: SPI: Supercharge the SPI driver
> MX28: m28evk: Align SSP clock speed
> MX28: m28evk: Enable SPI DMA
>
> Matt Sealey (7):
> spi: fix mxc_spi_slave structure allocation to clear memory
> spi: fix mxs_spi_slave structure allocation to clear memory
> mx5: add iomux-mx51.h include
> efikamx: move and rename Efika MX directories and config files
> to prepare for new boards
> efikamx: remove drive strength function and roll its
> functionality into the DCD
> efikamx: configure Smarttop PCBID and LED pads in DCD for
> convenience efikamx: update MAINTAINERS for Genesi Efika MX systems
>
> Otavio Salvador (9):
> mxs: Remove not required explicit iomux-mx28.h include
> mxs: Remove not required include of iomux-mx28.h
> mxs: rename regs-clkctrl.h to regs-clkctrl-mx28.h
> mxs: Convert sys_proto.h prefixes to 'mxs'
> MX28: config: Allow different target generation in elftosb call
> MX28: Move "regs-base.h" include after SoC type configuration
> mxs: Replace i.MX233 by i.MX23 on copyright header
> mxs: Only build internal Ethernet controller for i.MX28
> mxs: Rename 'mx28_dram_init' to 'mxs_dram_init'
>
> Stefano Babic (1):
> MX: Set a common gpio.h for all i.MX
>
> Troy Kisky (4):
> iomux: move IOMUX_GPR13_xxx defines
> imx-common/cmd_bmode.c: add imx bmode (bootmode) command
> mx6qsabrelite: add boot_mode support
> mx53evk: add boot_mode support
>
> Vikram Narayanan (1):
> tx25: Use generic gpio_* calls
>
> fabio.estevam at freescale.com (1):
> mxs: Convert timeout parameter to 'unsigned int'
>
> trem (3):
> rtc: add support of mx27 rtc
> gpio: add gpio api support to mx27 (v4)
> imx27lite: update with gpio api change (v4)
>
> MAINTAINERS | 7 +-
> Makefile | 5 +-
> arch/arm/cpu/arm1136/mx35/generic.c | 19 ++-
> arch/arm/cpu/arm1136/mx35/iomux.c | 2 -
> arch/arm/cpu/arm926ejs/mx25/generic.c | 8 +
> arch/arm/cpu/arm926ejs/mx27/generic.c | 11 +-
> arch/arm/cpu/arm926ejs/mxs/mxs.c | 40 ++---
> arch/arm/cpu/arm926ejs/mxs/spl_boot.c | 7 +-
> arch/arm/cpu/arm926ejs/mxs/spl_mem_init.c | 1 -
> arch/arm/cpu/arm926ejs/mxs/spl_power_init.c | 9 +-
> arch/arm/cpu/arm926ejs/mxs/start.S | 42 -----
> arch/arm/cpu/arm926ejs/mxs/timer.c | 2 +-
> .../arm926ejs/mxs/{u-boot.bd => u-boot-imx28.bd} | 0
> arch/arm/cpu/armv7/imx-common/Makefile | 1 +
> arch/arm/cpu/armv7/imx-common/cmd_bmode.c | 119
> ++++++++++++++ arch/arm/cpu/armv7/imx-common/cpu.c
> | 6 +- arch/arm/cpu/armv7/imx-common/timer.c | 2 +-
> arch/arm/cpu/armv7/mx5/lowlevel_init.S | 46 +++---
> arch/arm/cpu/armv7/mx5/soc.c | 39 +++++
> arch/arm/cpu/armv7/mx6/soc.c | 36 +++++
> arch/arm/include/asm/arch-mx25/gpio.h | 17 +-
> arch/arm/include/asm/arch-mx27/gpio.h | 55 +++++++
> arch/arm/include/asm/arch-mx27/imx-regs.h | 33 ++--
> arch/arm/include/asm/arch-mx27/regs-rtc.h | 40 +++++
> arch/arm/include/asm/arch-mx31/gpio.h | 7 +-
> arch/arm/include/asm/arch-mx31/imx-regs.h | 2 +-
> arch/arm/include/asm/arch-mx35/clock.h | 28 +++-
> arch/arm/include/asm/arch-mx35/crm_regs.h | 4 +-
> arch/arm/include/asm/arch-mx35/gpio.h | 12 +-
> arch/arm/include/asm/arch-mx35/imx-regs.h | 29 +---
> arch/arm/include/asm/arch-mx35/mx35_pins.h | 3 -
> arch/arm/include/asm/arch-mx35/sys_proto.h | 1 -
> arch/arm/include/asm/arch-mx5/clock.h | 2 -
> arch/arm/include/asm/arch-mx5/gpio.h | 7 +-
> arch/arm/include/asm/arch-mx5/imx-regs.h | 18 +++
> arch/arm/include/asm/arch-mx5/iomux-mx51.h | 164
> ++++++++++++++++++++
> arch/arm/include/asm/arch-mx6/gpio.h | 7 +-
> arch/arm/include/asm/arch-mx6/imx-regs.h | 23 ++-
> arch/arm/include/asm/arch-mx6/iomux.h | 129
> +++++++++++++++ arch/arm/include/asm/arch-mxs/dma.h
> | 3 +- arch/arm/include/asm/arch-mxs/imx-regs.h | 2 +-
> .../{regs-clkctrl.h => regs-clkctrl-mx28.h} | 0
> arch/arm/include/asm/arch-mxs/sys_proto.h | 24 +--
> arch/arm/include/asm/imx-common/boot_mode.h | 36 +++++
> arch/arm/include/asm/imx-common/gpio.h | 39 +++++
> arch/arm/include/asm/imx-common/iomux-v3.h | 111
> ------------- board/CarMediaLab/flea3/flea3.c |
> 6 +- board/bluegiga/apx4devkit/apx4devkit.c | 4 +-
> board/denx/m28evk/m28evk.c | 6 +-
> board/freescale/mx28evk/mx28evk.c | 2 +-
> board/freescale/mx35pdk/mx35pdk.c | 2 +-
> board/freescale/mx51evk/mx51evk.c | 6 +-
> board/freescale/mx53ard/mx53ard.c | 2 +-
> board/freescale/mx53evk/mx53evk.c | 13 ++
> board/freescale/mx53loco/mx53loco.c | 2 +-
> board/freescale/mx6qarm2/mx6qarm2.c | 4 +-
> board/freescale/mx6qsabrelite/mx6qsabrelite.c | 43 +++--
> board/{efikamx => genesi/mx51_efikamx}/Makefile | 0
> .../{efikamx => genesi/mx51_efikamx}/efikamx-usb.c | 2 +-
> board/{efikamx => genesi/mx51_efikamx}/efikamx.c | 77 ---------
> .../mx51_efikamx}/imximage_mx.cfg | 50 +++---
> .../mx51_efikamx}/imximage_sb.cfg | 0
> board/karo/tx25/tx25.c | 25 ++-
> board/logicpd/imx27lite/imx27lite.c | 5 +-
> board/schulercontrol/sc_sps_1/sc_sps_1.c | 2 +-
> board/syteco/zmx25/zmx25.c | 26 ++--
> boards.cfg | 4 +-
> drivers/dma/apbh_dma.c | 6 +-
> drivers/gpio/mxc_gpio.c | 10 +-
> drivers/i2c/mxs_i2c.c | 2 +-
> drivers/mmc/mxsmmc.c | 2 +-
> drivers/mtd/nand/mxs_nand.c | 6 +-
> drivers/rtc/Makefile | 1 +
> drivers/rtc/mx27rtc.c | 83 ++++++++++
> drivers/rtc/mxsrtc.c | 4 +-
> drivers/spi/mxc_spi.c | 6 +-
> drivers/spi/mxs_spi.c | 106
> ++++++++----- drivers/usb/host/ehci-mxs.c |
> 2 +- include/configs/apx4devkit.h | 6 +-
> include/configs/imx27lite-common.h | 5 +
> include/configs/m28evk.h | 11 +-
> include/configs/mx28evk.h | 6 +-
> include/configs/{efikamx.h => mx51_efikamx.h} | 0
> include/configs/mx53evk.h | 3 +
> include/configs/mx6qsabrelite.h | 6 +-
> include/configs/sc_sps_1.h | 4 +-
> 86 files changed, 1163 insertions(+), 585 deletions(-)
> rename arch/arm/cpu/arm926ejs/mxs/{u-boot.bd => u-boot-imx28.bd}
> (100%) create mode 100644 arch/arm/cpu/armv7/imx-common/cmd_bmode.c
> create mode 100644 arch/arm/include/asm/arch-mx27/gpio.h
> create mode 100644 arch/arm/include/asm/arch-mx27/regs-rtc.h
> create mode 100644 arch/arm/include/asm/arch-mx5/iomux-mx51.h
> create mode 100644 arch/arm/include/asm/arch-mx6/iomux.h
> rename arch/arm/include/asm/arch-mxs/{regs-clkctrl.h =>
> regs-clkctrl-mx28.h} (100%)
> create mode 100644 arch/arm/include/asm/imx-common/boot_mode.h
> create mode 100644 arch/arm/include/asm/imx-common/gpio.h
> rename board/{efikamx => genesi/mx51_efikamx}/Makefile (100%)
> rename board/{efikamx => genesi/mx51_efikamx}/efikamx-usb.c (99%)
> rename board/{efikamx => genesi/mx51_efikamx}/efikamx.c (85%)
> rename board/{efikamx => genesi/mx51_efikamx}/imximage_mx.cfg (71%)
> rename board/{efikamx => genesi/mx51_efikamx}/imximage_sb.cfg (100%)
> create mode 100644 drivers/rtc/mx27rtc.c
> rename include/configs/{efikamx.h => mx51_efikamx.h} (100%)
>
Applied to u-boot-arm/master, thanks!
Amicalement,
--
Albert.
^ permalink raw reply [flat|nested] 116+ messages in thread
* [U-Boot] [GIT PULL] Pull request: u-boot-imx
@ 2012-08-27 6:41 Stefano Babic
2012-09-01 12:57 ` Albert ARIBAUD
0 siblings, 1 reply; 116+ messages in thread
From: Stefano Babic @ 2012-08-27 6:41 UTC (permalink / raw)
To: u-boot
Hi Albert,
please pull from u-boot-imx, thanks.
The following changes since commit 5f50310588e87f2ff501992564d1b05df71419f4:
davinci, c6x: Always use C version of reset code (2012-08-25 13:40:03
+0200)
are available in the git repository at:
git://www.denx.de/git/u-boot-imx.git master
for you to fetch changes up to ff1728c902587c2dc76869a30a32013ef005b84a:
mxs: Convert timeout parameter to 'unsigned int' (2012-08-27 08:28:01
+0200)
----------------------------------------------------------------
Ashok Kumar Reddy (1):
mx6qarm2:Use IMX_GPIO_NR macro
Beno?t Th?baudeau (17):
mxc_spi: Round up clock divider
mx25: Enable dcache
mx5: Enable dcache
mx35: Fix typo on EDIO
mx3: Fix typo on IPU_CONF_CSI_EN
mx5/6 timer: Round up tick_to_time() value
mx5: cosmetic: Clean up lowlevel_init
mx35: Remove duplicate GPIO3_BASE_ADDR
mx5/6: Fix cpu_mmc_init() return value
mx35: Add cpu_mmc_init()
mx5: Undeclare imx_decode_pll()
mx35 iomux: Remove unused macro
mx35: Fix broken pin definitions
mx35: Remove declaration of non-existing function
mx35: Move clock enums to clock.h
mx35: Remove declaration of non-existing function
mxc: Make gpio_get_value() use PSR
Fabio Estevam (7):
m28evk: Turn on caches
apx4devkit: Turn on caches
mx28evk: Remove unneeded 'undef'
mxs: Use correct function name to initialize dram
mx53loco: Use IMX_GPIO_NR macro
mx51evk: Use IMX_GPIO_NR macro
mx53ard: Use IMX_GPIO_NR macro
Marek Vasut (7):
MX28: Drop the cp15 reconfiguration from SPL
MX28: Shuffle around the power management code
MX28: DMA: Align the struct mxs_dma_desc
MX28: DMA: Prolong the DMA timeout
MX28: SPI: Supercharge the SPI driver
MX28: m28evk: Align SSP clock speed
MX28: m28evk: Enable SPI DMA
Matt Sealey (7):
spi: fix mxc_spi_slave structure allocation to clear memory
spi: fix mxs_spi_slave structure allocation to clear memory
mx5: add iomux-mx51.h include
efikamx: move and rename Efika MX directories and config files to
prepare for new boards
efikamx: remove drive strength function and roll its functionality
into the DCD
efikamx: configure Smarttop PCBID and LED pads in DCD for convenience
efikamx: update MAINTAINERS for Genesi Efika MX systems
Otavio Salvador (9):
mxs: Remove not required explicit iomux-mx28.h include
mxs: Remove not required include of iomux-mx28.h
mxs: rename regs-clkctrl.h to regs-clkctrl-mx28.h
mxs: Convert sys_proto.h prefixes to 'mxs'
MX28: config: Allow different target generation in elftosb call
MX28: Move "regs-base.h" include after SoC type configuration
mxs: Replace i.MX233 by i.MX23 on copyright header
mxs: Only build internal Ethernet controller for i.MX28
mxs: Rename 'mx28_dram_init' to 'mxs_dram_init'
Stefano Babic (1):
MX: Set a common gpio.h for all i.MX
Troy Kisky (4):
iomux: move IOMUX_GPR13_xxx defines
imx-common/cmd_bmode.c: add imx bmode (bootmode) command
mx6qsabrelite: add boot_mode support
mx53evk: add boot_mode support
Vikram Narayanan (1):
tx25: Use generic gpio_* calls
fabio.estevam at freescale.com (1):
mxs: Convert timeout parameter to 'unsigned int'
trem (3):
rtc: add support of mx27 rtc
gpio: add gpio api support to mx27 (v4)
imx27lite: update with gpio api change (v4)
MAINTAINERS | 7 +-
Makefile | 5 +-
arch/arm/cpu/arm1136/mx35/generic.c | 19 ++-
arch/arm/cpu/arm1136/mx35/iomux.c | 2 -
arch/arm/cpu/arm926ejs/mx25/generic.c | 8 +
arch/arm/cpu/arm926ejs/mx27/generic.c | 11 +-
arch/arm/cpu/arm926ejs/mxs/mxs.c | 40 ++---
arch/arm/cpu/arm926ejs/mxs/spl_boot.c | 7 +-
arch/arm/cpu/arm926ejs/mxs/spl_mem_init.c | 1 -
arch/arm/cpu/arm926ejs/mxs/spl_power_init.c | 9 +-
arch/arm/cpu/arm926ejs/mxs/start.S | 42 -----
arch/arm/cpu/arm926ejs/mxs/timer.c | 2 +-
.../arm926ejs/mxs/{u-boot.bd => u-boot-imx28.bd} | 0
arch/arm/cpu/armv7/imx-common/Makefile | 1 +
arch/arm/cpu/armv7/imx-common/cmd_bmode.c | 119 ++++++++++++++
arch/arm/cpu/armv7/imx-common/cpu.c | 6 +-
arch/arm/cpu/armv7/imx-common/timer.c | 2 +-
arch/arm/cpu/armv7/mx5/lowlevel_init.S | 46 +++---
arch/arm/cpu/armv7/mx5/soc.c | 39 +++++
arch/arm/cpu/armv7/mx6/soc.c | 36 +++++
arch/arm/include/asm/arch-mx25/gpio.h | 17 +-
arch/arm/include/asm/arch-mx27/gpio.h | 55 +++++++
arch/arm/include/asm/arch-mx27/imx-regs.h | 33 ++--
arch/arm/include/asm/arch-mx27/regs-rtc.h | 40 +++++
arch/arm/include/asm/arch-mx31/gpio.h | 7 +-
arch/arm/include/asm/arch-mx31/imx-regs.h | 2 +-
arch/arm/include/asm/arch-mx35/clock.h | 28 +++-
arch/arm/include/asm/arch-mx35/crm_regs.h | 4 +-
arch/arm/include/asm/arch-mx35/gpio.h | 12 +-
arch/arm/include/asm/arch-mx35/imx-regs.h | 29 +---
arch/arm/include/asm/arch-mx35/mx35_pins.h | 3 -
arch/arm/include/asm/arch-mx35/sys_proto.h | 1 -
arch/arm/include/asm/arch-mx5/clock.h | 2 -
arch/arm/include/asm/arch-mx5/gpio.h | 7 +-
arch/arm/include/asm/arch-mx5/imx-regs.h | 18 +++
arch/arm/include/asm/arch-mx5/iomux-mx51.h | 164
++++++++++++++++++++
arch/arm/include/asm/arch-mx6/gpio.h | 7 +-
arch/arm/include/asm/arch-mx6/imx-regs.h | 23 ++-
arch/arm/include/asm/arch-mx6/iomux.h | 129 +++++++++++++++
arch/arm/include/asm/arch-mxs/dma.h | 3 +-
arch/arm/include/asm/arch-mxs/imx-regs.h | 2 +-
.../{regs-clkctrl.h => regs-clkctrl-mx28.h} | 0
arch/arm/include/asm/arch-mxs/sys_proto.h | 24 +--
arch/arm/include/asm/imx-common/boot_mode.h | 36 +++++
arch/arm/include/asm/imx-common/gpio.h | 39 +++++
arch/arm/include/asm/imx-common/iomux-v3.h | 111 -------------
board/CarMediaLab/flea3/flea3.c | 6 +-
board/bluegiga/apx4devkit/apx4devkit.c | 4 +-
board/denx/m28evk/m28evk.c | 6 +-
board/freescale/mx28evk/mx28evk.c | 2 +-
board/freescale/mx35pdk/mx35pdk.c | 2 +-
board/freescale/mx51evk/mx51evk.c | 6 +-
board/freescale/mx53ard/mx53ard.c | 2 +-
board/freescale/mx53evk/mx53evk.c | 13 ++
board/freescale/mx53loco/mx53loco.c | 2 +-
board/freescale/mx6qarm2/mx6qarm2.c | 4 +-
board/freescale/mx6qsabrelite/mx6qsabrelite.c | 43 +++--
board/{efikamx => genesi/mx51_efikamx}/Makefile | 0
.../{efikamx => genesi/mx51_efikamx}/efikamx-usb.c | 2 +-
board/{efikamx => genesi/mx51_efikamx}/efikamx.c | 77 ---------
.../mx51_efikamx}/imximage_mx.cfg | 50 +++---
.../mx51_efikamx}/imximage_sb.cfg | 0
board/karo/tx25/tx25.c | 25 ++-
board/logicpd/imx27lite/imx27lite.c | 5 +-
board/schulercontrol/sc_sps_1/sc_sps_1.c | 2 +-
board/syteco/zmx25/zmx25.c | 26 ++--
boards.cfg | 4 +-
drivers/dma/apbh_dma.c | 6 +-
drivers/gpio/mxc_gpio.c | 10 +-
drivers/i2c/mxs_i2c.c | 2 +-
drivers/mmc/mxsmmc.c | 2 +-
drivers/mtd/nand/mxs_nand.c | 6 +-
drivers/rtc/Makefile | 1 +
drivers/rtc/mx27rtc.c | 83 ++++++++++
drivers/rtc/mxsrtc.c | 4 +-
drivers/spi/mxc_spi.c | 6 +-
drivers/spi/mxs_spi.c | 106 ++++++++-----
drivers/usb/host/ehci-mxs.c | 2 +-
include/configs/apx4devkit.h | 6 +-
include/configs/imx27lite-common.h | 5 +
include/configs/m28evk.h | 11 +-
include/configs/mx28evk.h | 6 +-
include/configs/{efikamx.h => mx51_efikamx.h} | 0
include/configs/mx53evk.h | 3 +
include/configs/mx6qsabrelite.h | 6 +-
include/configs/sc_sps_1.h | 4 +-
86 files changed, 1163 insertions(+), 585 deletions(-)
rename arch/arm/cpu/arm926ejs/mxs/{u-boot.bd => u-boot-imx28.bd} (100%)
create mode 100644 arch/arm/cpu/armv7/imx-common/cmd_bmode.c
create mode 100644 arch/arm/include/asm/arch-mx27/gpio.h
create mode 100644 arch/arm/include/asm/arch-mx27/regs-rtc.h
create mode 100644 arch/arm/include/asm/arch-mx5/iomux-mx51.h
create mode 100644 arch/arm/include/asm/arch-mx6/iomux.h
rename arch/arm/include/asm/arch-mxs/{regs-clkctrl.h =>
regs-clkctrl-mx28.h} (100%)
create mode 100644 arch/arm/include/asm/imx-common/boot_mode.h
create mode 100644 arch/arm/include/asm/imx-common/gpio.h
rename board/{efikamx => genesi/mx51_efikamx}/Makefile (100%)
rename board/{efikamx => genesi/mx51_efikamx}/efikamx-usb.c (99%)
rename board/{efikamx => genesi/mx51_efikamx}/efikamx.c (85%)
rename board/{efikamx => genesi/mx51_efikamx}/imximage_mx.cfg (71%)
rename board/{efikamx => genesi/mx51_efikamx}/imximage_sb.cfg (100%)
create mode 100644 drivers/rtc/mx27rtc.c
rename include/configs/{efikamx.h => mx51_efikamx.h} (100%)
--
=====================================================================
DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: +49-8142-66989-53 Fax: +49-8142-66989-80 Email: sbabic at denx.de
=====================================================================
^ permalink raw reply [flat|nested] 116+ messages in thread
* [U-Boot] [GIT PULL] Pull request: u-boot-imx
@ 2012-08-07 16:00 Stefano Babic
0 siblings, 0 replies; 116+ messages in thread
From: Stefano Babic @ 2012-08-07 16:00 UTC (permalink / raw)
To: u-boot
Hi Albert,
please pull from u-boot-imx, thanks.
The following changes since commit 8abcd8ab962cd5fb2a4c025e7c7b62a9faf4aa08:
DaVinci DA8xx: fix set_cpu_clk_info() (2012-08-05 22:02:40 +0200)
are available in the git repository at:
git://www.denx.de/git/u-boot-imx.git master
for you to fetch changes up to c031cea4c7f5af2aba58e8883eb5cca871213d1b:
MX28: Add SchulerControl SC_SPS_1 platform (2012-08-07 17:49:55 +0200)
----------------------------------------------------------------
Fabio Estevam (3):
mx28evk: Turn on caches
mx51evk: do not overwrite the console
vision2: do not overwrite the console
Marek Vasut (9):
MX28: SPI: Refactor spi_xfer a bit
MX28: SPI: Pull out the PIO transfer function
MX28: SPI: Add DMA transfer support
MX28: Fix up the MMC driver DMA mode
MX28: Split out the PIO and DMA transfer functions
MX28: Transfer small blocks via PIO in MXS MMC
MX28: Fix MXS MMC DMA issues
MX28: Move the u-boot.bd info CPUDIR/SOCDIR
MX28: Add SchulerControl SC_SPS_1 platform
Otavio Salvador (9):
imx: Use a clear identification of an unidentified CPU type
MX28: extend print_cpuinfo() to use chip information
MX28: use a clear name for DDR2 initialization
mxs: reorganize source directory for easy sharing of code in i.MXS
SoCs
mxs: prefix register acessor macros with 'mxs' prefix
mxs: prefix register structs with 'mxs' prefix
mxs: Reowork SPL to use 'mxs' prefix for methods
mxs: Clarify why we poweroff in case of brownout in 5v conflict
mxs: rename mx28.c to mxs.c as it is common to i.MX233 and i.MX28 SoCs
Stathis Voukelatos (1):
i.MX28: bug fixes in PMU configuration code
Stefano Babic (1):
MX5: mx53loco: do not overwrite the console
Veli-Pekka Peltola (1):
Add support for Bluegiga APX4 Development Kit
MAINTAINERS | 5 +
Makefile | 2 +-
arch/arm/cpu/arm926ejs/{mx28 => mxs}/Makefile | 2 +-
arch/arm/cpu/arm926ejs/{mx28 => mxs}/clock.c | 40 +--
arch/arm/cpu/arm926ejs/{mx28 => mxs}/iomux.c | 6 +-
arch/arm/cpu/arm926ejs/{mx28/mx28.c => mxs/mxs.c} | 72 +++--
.../arm926ejs/{mx28/mx28_init.h => mxs/mxs_init.h} | 14 +-
arch/arm/cpu/arm926ejs/{mx28 => mxs}/spl_boot.c | 20 +-
.../cpu/arm926ejs/{mx28 => mxs}/spl_lradc_init.c | 10 +-
.../arm/cpu/arm926ejs/{mx28 => mxs}/spl_mem_init.c | 64 ++---
.../cpu/arm926ejs/{mx28 => mxs}/spl_power_init.c | 274
++++++++++----------
arch/arm/cpu/arm926ejs/{mx28 => mxs}/start.S | 0
arch/arm/cpu/arm926ejs/{mx28 => mxs}/timer.c | 8 +-
.../arm/cpu/arm926ejs/{mx28 => mxs}/u-boot-spl.lds | 2 +-
.../arm/cpu/arm926ejs/mxs}/u-boot.bd | 0
arch/arm/cpu/armv7/imx-common/cpu.c | 4 +-
.../include/asm/{arch-mx28 => arch-mxs}/clock.h | 0
arch/arm/include/asm/{arch-mx28 => arch-mxs}/dma.h | 0
.../arm/include/asm/{arch-mx28 => arch-mxs}/gpio.h | 0
.../include/asm/{arch-mx28 => arch-mxs}/imx-regs.h | 0
.../asm/{arch-mx28 => arch-mxs}/iomux-mx28.h | 0
.../include/asm/{arch-mx28 => arch-mxs}/iomux.h | 0
.../asm/{arch-mx28 => arch-mxs}/regs-apbh.h | 256
+++++++++---------
.../asm/{arch-mx28 => arch-mxs}/regs-base.h | 0
.../include/asm/{arch-mx28 => arch-mxs}/regs-bch.h | 44 ++--
.../asm/{arch-mx28 => arch-mxs}/regs-clkctrl.h | 60 ++---
.../asm/{arch-mx28 => arch-mxs}/regs-common.h | 34 +--
.../asm/{arch-mx28 => arch-mxs}/regs-digctl.h | 56 ++--
.../asm/{arch-mx28 => arch-mxs}/regs-gpmi.h | 28 +-
.../include/asm/{arch-mx28 => arch-mxs}/regs-i2c.h | 30 +--
.../asm/{arch-mx28 => arch-mxs}/regs-lcdif.h | 66 ++---
.../asm/{arch-mx28 => arch-mxs}/regs-lradc.h | 50 ++--
.../asm/{arch-mx28 => arch-mxs}/regs-ocotp.h | 88 +++----
.../asm/{arch-mx28 => arch-mxs}/regs-pinctrl.h | 170 ++++++------
.../asm/{arch-mx28 => arch-mxs}/regs-power.h | 30 +--
.../include/asm/{arch-mx28 => arch-mxs}/regs-rtc.h | 30 +--
.../include/asm/{arch-mx28 => arch-mxs}/regs-ssp.h | 42 +--
.../asm/{arch-mx28 => arch-mxs}/regs-timrot.h | 40 +--
.../include/asm/{arch-mx28 => arch-mxs}/regs-usb.h | 2 +-
.../asm/{arch-mx28 => arch-mxs}/regs-usbphy.h | 22 +-
.../asm/{arch-mx28 => arch-mxs}/sys_proto.h | 10 +-
board/bluegiga/apx4devkit/Makefile | 47 ++++
board/bluegiga/apx4devkit/apx4devkit.c | 150 +++++++++++
board/bluegiga/apx4devkit/spl_boot.c | 164 ++++++++++++
board/denx/m28evk/m28evk.c | 4 +-
board/denx/m28evk/spl_boot.c | 2 +-
board/freescale/mx28evk/iomux.c | 2 +-
board/freescale/mx28evk/mx28evk.c | 4 +-
board/freescale/mx28evk/u-boot.bd | 14 -
board/freescale/mx51evk/mx51evk.c | 10 +-
board/freescale/mx53loco/mx53loco.c | 12 +-
board/schulercontrol/sc_sps_1/Makefile | 47 ++++
board/schulercontrol/sc_sps_1/sc_sps_1.c | 113 ++++++++
board/schulercontrol/sc_sps_1/spl_boot.c | 165 ++++++++++++
board/ttcontrol/vision2/vision2.c | 11 +-
boards.cfg | 6 +-
doc/README.m28 | 4 +-
doc/README.mx28evk | 4 +-
drivers/dma/apbh_dma.c | 32 +--
drivers/gpio/mxs_gpio.c | 16 +-
drivers/i2c/mxs_i2c.c | 12 +-
drivers/mmc/mxsmmc.c | 202 ++++++++-------
drivers/mtd/nand/mxs_nand.c | 12 +-
drivers/rtc/mxsrtc.c | 6 +-
drivers/spi/mxs_spi.c | 200 +++++++++++---
drivers/usb/host/ehci-mxs.c | 24 +-
include/configs/apx4devkit.h | 238 +++++++++++++++++
include/configs/m28evk.h | 4 +-
include/configs/mx28evk.h | 6 +-
include/configs/mx51evk.h | 2 +
include/configs/mx53loco.h | 2 +
include/configs/sc_sps_1.h | 208 +++++++++++++++
include/configs/vision2.h | 2 +
73 files changed, 2324 insertions(+), 982 deletions(-)
rename arch/arm/cpu/arm926ejs/{mx28 => mxs}/Makefile (97%)
rename arch/arm/cpu/arm926ejs/{mx28 => mxs}/clock.c (89%)
rename arch/arm/cpu/arm926ejs/{mx28 => mxs}/iomux.c (94%)
rename arch/arm/cpu/arm926ejs/{mx28/mx28.c => mxs/mxs.c} (79%)
rename arch/arm/cpu/arm926ejs/{mx28/mx28_init.h => mxs/mxs_init.h} (81%)
rename arch/arm/cpu/arm926ejs/{mx28 => mxs}/spl_boot.c (90%)
rename arch/arm/cpu/arm926ejs/{mx28 => mxs}/spl_lradc_init.c (91%)
rename arch/arm/cpu/arm926ejs/{mx28 => mxs}/spl_mem_init.c (83%)
rename arch/arm/cpu/arm926ejs/{mx28 => mxs}/spl_power_init.c (81%)
rename arch/arm/cpu/arm926ejs/{mx28 => mxs}/start.S (100%)
rename arch/arm/cpu/arm926ejs/{mx28 => mxs}/timer.c (95%)
rename arch/arm/cpu/arm926ejs/{mx28 => mxs}/u-boot-spl.lds (97%)
rename {board/denx/m28evk => arch/arm/cpu/arm926ejs/mxs}/u-boot.bd (100%)
rename arch/arm/include/asm/{arch-mx28 => arch-mxs}/clock.h (100%)
rename arch/arm/include/asm/{arch-mx28 => arch-mxs}/dma.h (100%)
rename arch/arm/include/asm/{arch-mx28 => arch-mxs}/gpio.h (100%)
rename arch/arm/include/asm/{arch-mx28 => arch-mxs}/imx-regs.h (100%)
rename arch/arm/include/asm/{arch-mx28 => arch-mxs}/iomux-mx28.h (100%)
rename arch/arm/include/asm/{arch-mx28 => arch-mxs}/iomux.h (100%)
rename arch/arm/include/asm/{arch-mx28 => arch-mxs}/regs-apbh.h (77%)
rename arch/arm/include/asm/{arch-mx28 => arch-mxs}/regs-base.h (100%)
rename arch/arm/include/asm/{arch-mx28 => arch-mxs}/regs-bch.h (92%)
rename arch/arm/include/asm/{arch-mx28 => arch-mxs}/regs-clkctrl.h (88%)
rename arch/arm/include/asm/{arch-mx28 => arch-mxs}/regs-common.h (78%)
rename arch/arm/include/asm/{arch-mx28 => arch-mxs}/regs-digctl.h (77%)
rename arch/arm/include/asm/{arch-mx28 => arch-mxs}/regs-gpmi.h (95%)
rename arch/arm/include/asm/{arch-mx28 => arch-mxs}/regs-i2c.h (94%)
rename arch/arm/include/asm/{arch-mx28 => arch-mxs}/regs-lcdif.h (84%)
rename arch/arm/include/asm/{arch-mx28 => arch-mxs}/regs-lradc.h (96%)
rename arch/arm/include/asm/{arch-mx28 => arch-mxs}/regs-ocotp.h (71%)
rename arch/arm/include/asm/{arch-mx28 => arch-mxs}/regs-pinctrl.h (93%)
rename arch/arm/include/asm/{arch-mx28 => arch-mxs}/regs-power.h (97%)
rename arch/arm/include/asm/{arch-mx28 => arch-mxs}/regs-rtc.h (91%)
rename arch/arm/include/asm/{arch-mx28 => arch-mxs}/regs-ssp.h (95%)
rename arch/arm/include/asm/{arch-mx28 => arch-mxs}/regs-timrot.h (90%)
rename arch/arm/include/asm/{arch-mx28 => arch-mxs}/regs-usb.h (99%)
rename arch/arm/include/asm/{arch-mx28 => arch-mxs}/regs-usbphy.h (94%)
rename arch/arm/include/asm/{arch-mx28 => arch-mxs}/sys_proto.h (89%)
create mode 100644 board/bluegiga/apx4devkit/Makefile
create mode 100644 board/bluegiga/apx4devkit/apx4devkit.c
create mode 100644 board/bluegiga/apx4devkit/spl_boot.c
delete mode 100644 board/freescale/mx28evk/u-boot.bd
create mode 100644 board/schulercontrol/sc_sps_1/Makefile
create mode 100644 board/schulercontrol/sc_sps_1/sc_sps_1.c
create mode 100644 board/schulercontrol/sc_sps_1/spl_boot.c
create mode 100644 include/configs/apx4devkit.h
create mode 100644 include/configs/sc_sps_1.h
Best regards,
Stefano
--
=====================================================================
DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: +49-8142-66989-53 Fax: +49-8142-66989-80 Email: sbabic at denx.de
=====================================================================
^ permalink raw reply [flat|nested] 116+ messages in thread
* [U-Boot] [GIT PULL] Pull request: u-boot-imx
2012-07-02 18:03 Stefano Babic
@ 2012-07-05 8:23 ` Albert ARIBAUD
0 siblings, 0 replies; 116+ messages in thread
From: Albert ARIBAUD @ 2012-07-05 8:23 UTC (permalink / raw)
To: u-boot
Hi Stefano,
On Mon, 02 Jul 2012 20:03:02 +0200, Stefano Babic <sbabic@denx.de>
wrote:
> Hi Albert,
>
> please pull from u-boot-imx. Thanks !
>
> The following changes since commit
> 3e0cac6b5158b22248f57cdf7769bf8d610fec5e:
>
> EXYNOS: SMDK5250: Enable the pinmux setup (2012-06-25 22:51:36
> +0200)
>
> are available in the git repository at:
>
> git://www.denx.de/git/u-boot-imx.git master
>
> for you to fetch changes up to
> c45272e25bdf241fbb27638465f16ce2342ed1b6:
>
> i.MX6 USDHC: Use the ESDHC clock (2012-07-02 19:53:20 +0200)
Applied, thanks.
Amicalement,
--
Albert.
^ permalink raw reply [flat|nested] 116+ messages in thread
* [U-Boot] [GIT PULL] Pull request: u-boot-imx
@ 2012-07-02 18:03 Stefano Babic
2012-07-05 8:23 ` Albert ARIBAUD
0 siblings, 1 reply; 116+ messages in thread
From: Stefano Babic @ 2012-07-02 18:03 UTC (permalink / raw)
To: u-boot
Hi Albert,
please pull from u-boot-imx. Thanks !
The following changes since commit 3e0cac6b5158b22248f57cdf7769bf8d610fec5e:
EXYNOS: SMDK5250: Enable the pinmux setup (2012-06-25 22:51:36 +0200)
are available in the git repository at:
git://www.denx.de/git/u-boot-imx.git master
for you to fetch changes up to c45272e25bdf241fbb27638465f16ce2342ed1b6:
i.MX6 USDHC: Use the ESDHC clock (2012-07-02 19:53:20 +0200)
----------------------------------------------------------------
Fabio Estevam (21):
mx53loco: Fix revision of Dialog boards
mx53: Fix mask for SATA reference clock
mx53loco: Remove unused SOBJS
mx53evk: Remove unused SOBJS
mx53ard: Remove unused SOBJS
mx53smd: Remove unused SOBJS
mx51evk: Remove unused SOBJS
efikamx: Remove unused SOBJS
vision2: Remove unused SOBJS
ima3-mx53: Remove unused SOBJS
mx6qarm2: Remove unused SOBJS
mx6qsabrelite: Remove unused SOBJS
mx53ard: Remove unused CONFIG_MII_GASKET
imx31_phycore: Remove CONFIG_SYS_I2C_SLAVE definition
mx35pdk: Remove CONFIG_SYS_I2C_SLAVE definition
mx53ard: Remove CONFIG_SYS_I2C_SLAVE definition
mx53evk: Remove CONFIG_SYS_I2C_SLAVE definition
mx53loco: Remove CONFIG_SYS_I2C_SLAVE definition
mx53smd: Remove CONFIG_SYS_I2C_SLAVE definition
mx28evk: Fix PSWITCH key position
mx28evk: Fix boot by adjusting HW_DRAM_CTL29 register
Jason Liu (1):
i.mx: i.mx6x: NO_MUX_I/NO_PAD_I not set correctly
Marek Vasut (1):
i.MX28: Add function to adjust memory parameters
Michael Langer (1):
i.MX6 USDHC: Use the ESDHC clock
Otavio Salvador (6):
MX28: Fix a typo in mx28_reg_8 macro
m28evk: fix board config include guardian macro name
mx28evk: ensure command definition is in alphabetic order
mx28evk: fix board config include guardian macro name
m28evk: drop duplicated definition of CONFIG_OF_LIBFDT
m28evk: use same notation to alloc the 128kB stack
Vikram Narayanan (1):
mx6: Avoid writing to read-only bits in imximage.cfg
arch/arm/cpu/arm926ejs/mx28/spl_mem_init.c | 8 ++++++++
arch/arm/cpu/armv7/imx-common/speed.c | 4 ++++
arch/arm/cpu/armv7/mx5/clock.c | 2 +-
arch/arm/include/asm/arch-mx28/regs-common.h | 2 +-
arch/arm/include/asm/arch-mx6/mx6x_pins.h | 4 ++--
board/efikamx/Makefile | 7 +++----
board/esg/ima3-mx53/Makefile | 2 +-
board/freescale/mx28evk/iomux.c | 14 ++++++++++++++
board/freescale/mx51evk/Makefile | 7 +++----
board/freescale/mx53ard/Makefile | 7 +++----
board/freescale/mx53evk/Makefile | 7 +++----
board/freescale/mx53loco/Makefile | 7 +++----
board/freescale/mx53loco/mx53loco.c | 12 +++++++-----
board/freescale/mx53smd/Makefile | 7 +++----
board/freescale/mx6qarm2/Makefile | 7 +++----
board/freescale/mx6qarm2/imximage.cfg | 2 +-
board/freescale/mx6qsabrelite/Makefile | 7 +++----
board/freescale/mx6qsabrelite/imximage.cfg | 2 +-
board/ttcontrol/vision2/Makefile | 5 ++---
doc/README.mx28evk | 2 +-
include/configs/imx31_phycore.h | 1 -
include/configs/m28evk.h | 10 ++++------
include/configs/mx28evk.h | 8 ++++----
include/configs/mx35pdk.h | 1 -
include/configs/mx53ard.h | 2 --
include/configs/mx53evk.h | 1 -
include/configs/mx53loco.h | 2 --
include/configs/mx53smd.h | 1 -
28 files changed, 75 insertions(+), 66 deletions(-)
--
=====================================================================
DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: +49-8142-66989-53 Fax: +49-8142-66989-80 Email: sbabic at denx.de
=====================================================================
^ permalink raw reply [flat|nested] 116+ messages in thread
* [U-Boot] [GIT PULL] Pull request: u-boot-imx
2012-05-09 16:38 Stefano Babic
@ 2012-05-15 6:24 ` Albert ARIBAUD
0 siblings, 0 replies; 116+ messages in thread
From: Albert ARIBAUD @ 2012-05-15 6:24 UTC (permalink / raw)
To: u-boot
Hi Stefano,
Le 09/05/2012 18:38, Stefano Babic a ?crit :
> Hi Albert,
>
> please pull from u-boot-imx:
>
> The following changes since commit 026251a5e825d61d3bcdf6dffcc27d15afd574f4:
>
> EXYNOS: Change bits per pixel value proper for u-boot. (2012-04-25
> 16:23:26 +0900)
>
> are available in the git repository at:
>
> git://www.denx.de/git/u-boot-imx.git master
>
> for you to fetch changes up to baff308162c3980e7616b624e19889a4d757aae8:
>
> i.MX28: Avoid redefining serial_put[cs]() (2012-05-09 12:49:14 +0200)
Applied to u-boot-arm/master for58 commits, thanks.
Amicalement,
--
Albert.
^ permalink raw reply [flat|nested] 116+ messages in thread
* [U-Boot] [GIT PULL] Pull request: u-boot-imx
@ 2012-05-09 16:38 Stefano Babic
2012-05-15 6:24 ` Albert ARIBAUD
0 siblings, 1 reply; 116+ messages in thread
From: Stefano Babic @ 2012-05-09 16:38 UTC (permalink / raw)
To: u-boot
Hi Albert,
please pull from u-boot-imx:
The following changes since commit 026251a5e825d61d3bcdf6dffcc27d15afd574f4:
EXYNOS: Change bits per pixel value proper for u-boot. (2012-04-25
16:23:26 +0900)
are available in the git repository at:
git://www.denx.de/git/u-boot-imx.git master
for you to fetch changes up to baff308162c3980e7616b624e19889a4d757aae8:
i.MX28: Avoid redefining serial_put[cs]() (2012-05-09 12:49:14 +0200)
----------------------------------------------------------------
Dirk Behme (1):
i.MX6: Add ANATOP regulator init
Eric Nelson (3):
i.MX6Q: mx6qsabrelite: Add keypress support to alter boot flow
i.MX6: add enable_sata_clock()
i.MX6: mx6q_sabrelite: add SATA bindings
Fabio Estevam (19):
pmic: Add support for the Dialog DA9053 PMIC
mx6qsabrelite: No need to set the direction for GPIO3_23 again
mx28evk: Allow to booting a dt kernel
m28evk: Allow to booting a dt kernel
mx28evk: Allow booting a zImage kernel
mx6qsabrelite: Allow booting a zImage kernel
mx6qarm2: Allow booting a zImage kernel
mx31pdk: Allow booting a zImage kernel
imx-common: Factor out get_ahb_clk()
mx5: Add clock config interface
mx53loco: Allow to print CPU information at a later stage
mx53loco: Add support for 1GHz operation for DA9053-based boards
pmic: dialog: Avoid name conflicts
mx53loco: Add mc34708 support and set mx53 frequency at 1GHz
mx53loco: Turn on VUSB regulator
mx53loco: Add CONFIG_REVISION_TAG
mx53loco: Remove unneeded gpio_set_value()
spi: mxs: Introduce spi_cs_is_valid()
spi: mxs: Allow other chip selects to work
Lauri Hintsala (1):
mx28evk: add NAND support
Marek Vasut (17):
M28: Enable FDT support
Revert "i.MX28: Enable additional DRAM address bits"
M28: Scan only first 512 MB of DRAM to avoid memory wraparound
i.MX28: Add delay after CPU bypass is cleared
FEC: Abstract out register setup
M28EVK: Implement support for new board V2.0
M28EVK: Add SD update command
i.MX28: Improve passing of data from SPL to U-Boot
i.MX28: Implement boot pads sampling and reporting
i.MX28: Add LCDIF register definitions
i.MX28: Shut down the LCD controller before reset
i.MX28: Add LRADC register definitions
i.MX28: Add LRADC init to i.MX28 SPL
i.MX28: Reorder battery status functions in SPL
i.MX28: Add battery boot components to SPL
i.MX28: Check if WP detection is implemented at all
i.MX28: Avoid redefining serial_put[cs]()
Stefano Babic (9):
Define UART4 and UART5 base addresses
NET: fec_mxc.c: Add a way to disable auto negotiation
MX5: Add definitions for SATA controller
SATA: check for return value from sata functions
MX53: add function to set SATA clock to internal
SATA: add driver for MX5 / MX6 SOCs
MX53: Add support to ESG ima3 board
MX53: mx53loco: Add SATA support
MX5: PAD_CTL_DRV_VOT_LOW and PAD_CTL_DRV_VOT_HIGH exchanged
Timo Ketola (7):
i.MX25: esdhc: Add mxc_get_clock infrastructure
i.MX25: This architecture has a GPIO4 too
imx: nand: Support flash based BBT
i.MX25: usb: Set PORTSCx register
imx: usb: There is no such register
i.MX2: Include asm/types.h in arch-mx25/imx-regs.h
imx: Add u-boot.imx as target for ARM9 i.MX SOCs
Wolfgang Grandegger (1):
USB: ehci-mx6: Fix broken IO access
arch/arm/cpu/arm926ejs/config.mk | 6 +
arch/arm/cpu/arm926ejs/mx25/generic.c | 27 +
arch/arm/cpu/arm926ejs/mx28/Makefile | 2 +-
arch/arm/cpu/arm926ejs/mx28/mx28.c | 29 +-
arch/arm/cpu/arm926ejs/mx28/mx28_init.h | 4 +
arch/arm/cpu/arm926ejs/mx28/spl_boot.c | 57 ++
arch/arm/cpu/arm926ejs/mx28/spl_lradc_init.c | 86 ++
arch/arm/cpu/arm926ejs/mx28/spl_mem_init.c | 14 +-
arch/arm/cpu/arm926ejs/mx28/spl_power_init.c | 224 +++--
arch/arm/cpu/armv7/imx-common/cpu.c | 15 +-
arch/arm/cpu/armv7/mx5/clock.c | 493 +++++++++-
arch/arm/cpu/armv7/mx6/clock.c | 50 +-
arch/arm/cpu/armv7/mx6/soc.c | 30 +
arch/arm/include/asm/arch-mx25/clock.h | 23 +
arch/arm/include/asm/arch-mx25/imx-regs.h | 3 +
arch/arm/include/asm/arch-mx28/imx-regs.h | 2 +
arch/arm/include/asm/arch-mx28/regs-lcdif.h | 212 +++++
arch/arm/include/asm/arch-mx28/regs-lradc.h | 400 ++++++++
arch/arm/include/asm/arch-mx28/sys_proto.h | 30 +
arch/arm/include/asm/arch-mx5/clock.h | 7 +-
arch/arm/include/asm/arch-mx5/crm_regs.h | 6 +
arch/arm/include/asm/arch-mx5/imx-regs.h | 11 +
arch/arm/include/asm/arch-mx5/iomux.h | 4 +-
arch/arm/include/asm/arch-mx5/sys_proto.h | 3 +
arch/arm/include/asm/arch-mx6/clock.h | 1 +
.../asm/arch-mx6/{ccm_regs.h => crm_regs.h} | 2 +-
arch/arm/include/asm/arch-mx6/imx-regs.h | 9 +
arch/arm/include/asm/arch-mx6/iomux-v3.h | 111 +++
arch/arm/include/asm/arch-mx6/sys_proto.h | 5 +-
board/denx/m28evk/m28evk.c | 20 +-
board/denx/m28evk/spl_boot.c | 8 +-
board/esg/ima3-mx53/Makefile | 41 +
board/esg/ima3-mx53/ima3-mx53.c | 302 ++++++
board/esg/ima3-mx53/imximage.cfg | 108 +++
board/freescale/mx28evk/iomux.c | 21 +
board/freescale/mx53loco/mx53loco.c | 146 ++-
board/freescale/mx6qsabrelite/mx6qsabrelite.c | 155 +++-
boards.cfg | 1 +
common/cmd_sata.c | 9 +-
drivers/block/Makefile | 1 +
drivers/block/dwc_ahsata.c | 969
++++++++++++++++++++
drivers/block/dwc_ahsata.h | 335 +++++++
drivers/gpio/mxc_gpio.c | 3 +-
drivers/misc/Makefile | 1 +
drivers/misc/pmic_dialog.c | 37 +
drivers/mmc/mxsmmc.c | 3 +-
drivers/mtd/nand/mxc_nand.c | 33 +
drivers/net/fec_mxc.c | 88 +-
drivers/spi/mxs_spi.c | 23 +-
drivers/usb/host/ehci-mx6.c | 5 +-
drivers/usb/host/ehci-mxc.c | 4 -
include/ahci.h | 5 +-
include/configs/ima3-mx53.h | 269 ++++++
include/configs/m28evk.h | 15 +-
include/configs/mx28evk.h | 13 +
include/configs/mx31pdk.h | 1 +
include/configs/mx53loco.h | 29 +-
include/configs/mx6qarm2.h | 1 +
include/configs/mx6qsabrelite.h | 17 +
include/dialog_pmic.h | 187 ++++
include/fsl_pmic.h | 11 +
include/pmic.h | 1 +
62 files changed, 4523 insertions(+), 205 deletions(-)
create mode 100644 arch/arm/cpu/arm926ejs/mx28/spl_lradc_init.c
create mode 100644 arch/arm/include/asm/arch-mx28/regs-lcdif.h
create mode 100644 arch/arm/include/asm/arch-mx28/regs-lradc.h
rename arch/arm/include/asm/arch-mx6/{ccm_regs.h => crm_regs.h} (99%)
create mode 100644 board/esg/ima3-mx53/Makefile
create mode 100644 board/esg/ima3-mx53/ima3-mx53.c
create mode 100644 board/esg/ima3-mx53/imximage.cfg
create mode 100644 drivers/block/dwc_ahsata.c
create mode 100644 drivers/block/dwc_ahsata.h
create mode 100644 drivers/misc/pmic_dialog.c
create mode 100644 include/configs/ima3-mx53.h
create mode 100644 include/dialog_pmic.h
Regards,
Stefano
--
=====================================================================
DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: +49-8142-66989-53 Fax: +49-8142-66989-80 Email: sbabic at denx.de
=====================================================================
^ permalink raw reply [flat|nested] 116+ messages in thread
* [U-Boot] [GIT PULL] Pull request: u-boot-imx
2012-04-11 14:22 Stefano Babic
@ 2012-04-16 13:04 ` Albert ARIBAUD
0 siblings, 0 replies; 116+ messages in thread
From: Albert ARIBAUD @ 2012-04-16 13:04 UTC (permalink / raw)
To: u-boot
Hi Stefano,
Le 11/04/2012 16:22, Stefano Babic a ?crit :
> Hi Albert,
>
> please pull from u-boot-imx. Note: I rebased on u-boot mainline, because
> I needed some patches for testing that were merged by Wolfgang, and I
> could not find in u-boot-arm. Let me know if this is a problem for you ;-)
>
> The following changes since commit 3f0675d1a532dbf1fd906103e4b61a6fb842c257:
>
> Merge branch 'marek.vasut at gmail.com' of
> git://git.denx.de/u-boot-staging (2012-04-09 21:34:27 +0200)
>
> are available in the git repository at:
>
> git://www.denx.de/git/u-boot-imx.git master
>
> Anatolij Gustschin (1):
> ARM1136: add cache flush and invalidate operations
>
> Eric Nelson (3):
> i.MX6: define CACHELINE_SIZE
> i.MX6: implement enable_caches()
> i.MX6: mx6qsabrelite: add cache commands if cache is enabled
>
> Fabio Estevam (4):
> mx28: Split the README into a common part and a m28 specific part
> mx28evk: Add a README file
> mx6qsabrelite: Add boot switch setting information into the README
> mx6qsabrelite: Fix the serial console port
>
> Marek Vasut (4):
> i.MX28: Fix initial stack pointer position
> i.MX28: Allow coexistence of PIO and DMA mode for SD/MMC
> DMA: Split the APBH DMA init into block and channel init
> M28: Pull out CONFIG_APBH_DMA so it's always enabled
>
> Stefano Babic (7):
> ARM: 926ejs: use debug() for misaligned addresses
> mx35: flea3: fix when cache functions are linked
> mx35: mx35pdk: fix when cache functions are linked
> MX31: mx31pdk: drop enable_caches from board file
> ARM: add u-boot.imx as target for i.MX SOCs
> ARM1136: MX35: Make asm routines volatile in cache ops
> MX35: mx35pdk: wrong board revision
>
> Troy Kisky (1):
> MX53: DDR: Fix ZQHWCTRL field TZQ_CS
>
> Vikram Narayanan (4):
> imx: Remove unneeded/repititive definitions from imx headers
> imx: Add GPIO_TO_PORT macro in the mxc_gpio driver
> imx: Use GPIO_TO_PORT macro in the gpio driver instead of (gpio>> 5)
> imx: Return gpio_set_value in gpio_direction_output
>
> arch/arm/cpu/arm1136/cpu.c | 103 ++++++++++++-
> arch/arm/cpu/arm926ejs/cache.c | 2 +-
> arch/arm/cpu/arm926ejs/mx28/mx28.c | 6 +
> arch/arm/cpu/armv7/config.mk | 3 +
> arch/arm/cpu/armv7/mx6/soc.c | 8 +
> arch/arm/include/asm/arch-mx28/dma.h | 4 +-
> arch/arm/include/asm/arch-mx35/mx35_pins.h | 2 -
> arch/arm/include/asm/arch-mx5/mx5x_pins.h | 2 -
> arch/arm/include/asm/arch-mx6/imx-regs.h | 4 +-
> board/freescale/mx31pdk/mx31pdk.c | 8 -
> board/freescale/mx35pdk/mx35pdk.c | 11 --
> board/freescale/mx53ard/imximage_dd3.cfg | 2 +-
> board/freescale/mx53evk/imximage.cfg | 2 +-
> board/freescale/mx53loco/imximage.cfg | 2 +-
> board/freescale/mx53smd/imximage.cfg | 2 +-
> doc/README.m28 | 219
> +--------------------------
> doc/README.mx28_common | 226
> ++++++++++++++++++++++++++++
> doc/README.mx28evk | 29 ++++
> doc/README.mx6qsabrelite | 3 +-
> drivers/dma/apbh_dma.c | 38 ++---
> drivers/gpio/mxc_gpio.c | 12 +-
> drivers/mmc/mxsmmc.c | 53 +++++++-
> drivers/mtd/nand/mxs_nand.c | 11 +-
> include/configs/flea3.h | 2 +
> include/configs/m28evk.h | 8 +-
> include/configs/mx28evk.h | 2 +-
> include/configs/mx35pdk.h | 3 +-
> include/configs/mx6qarm2.h | 2 +
> include/configs/mx6qsabrelite.h | 8 +-
> 29 files changed, 492 insertions(+), 285 deletions(-)
> create mode 100644 doc/README.mx28_common
> create mode 100644 doc/README.mx28evk
>
>
> Stefano
Applied to u-boot-arm/master, thanks!
Amicalement,
--
Albert.
^ permalink raw reply [flat|nested] 116+ messages in thread
* [U-Boot] [GIT PULL] Pull request: u-boot-imx
@ 2012-04-11 14:22 Stefano Babic
2012-04-16 13:04 ` Albert ARIBAUD
0 siblings, 1 reply; 116+ messages in thread
From: Stefano Babic @ 2012-04-11 14:22 UTC (permalink / raw)
To: u-boot
Hi Albert,
please pull from u-boot-imx. Note: I rebased on u-boot mainline, because
I needed some patches for testing that were merged by Wolfgang, and I
could not find in u-boot-arm. Let me know if this is a problem for you ;-)
The following changes since commit 3f0675d1a532dbf1fd906103e4b61a6fb842c257:
Merge branch 'marek.vasut at gmail.com' of
git://git.denx.de/u-boot-staging (2012-04-09 21:34:27 +0200)
are available in the git repository at:
git://www.denx.de/git/u-boot-imx.git master
Anatolij Gustschin (1):
ARM1136: add cache flush and invalidate operations
Eric Nelson (3):
i.MX6: define CACHELINE_SIZE
i.MX6: implement enable_caches()
i.MX6: mx6qsabrelite: add cache commands if cache is enabled
Fabio Estevam (4):
mx28: Split the README into a common part and a m28 specific part
mx28evk: Add a README file
mx6qsabrelite: Add boot switch setting information into the README
mx6qsabrelite: Fix the serial console port
Marek Vasut (4):
i.MX28: Fix initial stack pointer position
i.MX28: Allow coexistence of PIO and DMA mode for SD/MMC
DMA: Split the APBH DMA init into block and channel init
M28: Pull out CONFIG_APBH_DMA so it's always enabled
Stefano Babic (7):
ARM: 926ejs: use debug() for misaligned addresses
mx35: flea3: fix when cache functions are linked
mx35: mx35pdk: fix when cache functions are linked
MX31: mx31pdk: drop enable_caches from board file
ARM: add u-boot.imx as target for i.MX SOCs
ARM1136: MX35: Make asm routines volatile in cache ops
MX35: mx35pdk: wrong board revision
Troy Kisky (1):
MX53: DDR: Fix ZQHWCTRL field TZQ_CS
Vikram Narayanan (4):
imx: Remove unneeded/repititive definitions from imx headers
imx: Add GPIO_TO_PORT macro in the mxc_gpio driver
imx: Use GPIO_TO_PORT macro in the gpio driver instead of (gpio >> 5)
imx: Return gpio_set_value in gpio_direction_output
arch/arm/cpu/arm1136/cpu.c | 103 ++++++++++++-
arch/arm/cpu/arm926ejs/cache.c | 2 +-
arch/arm/cpu/arm926ejs/mx28/mx28.c | 6 +
arch/arm/cpu/armv7/config.mk | 3 +
arch/arm/cpu/armv7/mx6/soc.c | 8 +
arch/arm/include/asm/arch-mx28/dma.h | 4 +-
arch/arm/include/asm/arch-mx35/mx35_pins.h | 2 -
arch/arm/include/asm/arch-mx5/mx5x_pins.h | 2 -
arch/arm/include/asm/arch-mx6/imx-regs.h | 4 +-
board/freescale/mx31pdk/mx31pdk.c | 8 -
board/freescale/mx35pdk/mx35pdk.c | 11 --
board/freescale/mx53ard/imximage_dd3.cfg | 2 +-
board/freescale/mx53evk/imximage.cfg | 2 +-
board/freescale/mx53loco/imximage.cfg | 2 +-
board/freescale/mx53smd/imximage.cfg | 2 +-
doc/README.m28 | 219
+--------------------------
doc/README.mx28_common | 226
++++++++++++++++++++++++++++
doc/README.mx28evk | 29 ++++
doc/README.mx6qsabrelite | 3 +-
drivers/dma/apbh_dma.c | 38 ++---
drivers/gpio/mxc_gpio.c | 12 +-
drivers/mmc/mxsmmc.c | 53 +++++++-
drivers/mtd/nand/mxs_nand.c | 11 +-
include/configs/flea3.h | 2 +
include/configs/m28evk.h | 8 +-
include/configs/mx28evk.h | 2 +-
include/configs/mx35pdk.h | 3 +-
include/configs/mx6qarm2.h | 2 +
include/configs/mx6qsabrelite.h | 8 +-
29 files changed, 492 insertions(+), 285 deletions(-)
create mode 100644 doc/README.mx28_common
create mode 100644 doc/README.mx28evk
Stefano
--
=====================================================================
DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: +49-8142-66989-53 Fax: +49-8142-66989-80 Email: sbabic at denx.de
=====================================================================
^ permalink raw reply [flat|nested] 116+ messages in thread
* [U-Boot] [GIT PULL] Pull request: u-boot-imx
2012-03-26 21:08 ` Albert ARIBAUD
@ 2012-03-27 7:39 ` Stefano Babic
0 siblings, 0 replies; 116+ messages in thread
From: Stefano Babic @ 2012-03-27 7:39 UTC (permalink / raw)
To: u-boot
On 26/03/2012 23:08, Albert ARIBAUD wrote:
> Le 26/03/2012 22:45, Albert ARIBAUD a ?crit :
>> Hi Stefano,
>>
>> Le 08/03/2012 08:52, Stefano Babic a ?crit :
>>> Hi Albert,
>>>
>>> please pull from u-boot-imx, thanks.
>>>
>>> The following changes since commit
>>> 32ec258f829808dd7cf74fd83ba999fdaaeab715:
>>>
>>> IXP: Fix GPIO_INT_ACT_LOW_SET() (2012-03-08 08:11:45 +0100)
>>>
>>> are available in the git repository at:
>>> git://www.denx.de/git/u-boot-imx.git master
>>>
>>> Dirk Behme (1):
>>> imximage: Remove overwriting of flash_offset
>>>
>>> Eric Nelson (2):
>>> i.MX6: mx6qsabrelite: add ext2 support
>>> mx6q: mx6qsabrelite: setup_spi() should be called in board_init to
>>> allow use for environment
>>>
>>> Fabio Estevam (5):
>>> mx51evk: Fix CONFIG_SYS_MEMTEST_END
>>> mx53evk: Fix CONFIG_SYS_MEMTEST_END
>>> mx53smd: Fix CONFIG_SYS_MEMTEST_END
>>> efikamx: Fix CONFIG_SYS_MEMTEST_END
>>> mx31pdk: Fix CONFIG_SYS_MEMTEST_END
>>>
>>> Helmut Raiger (1):
>>> mx31: add "ARM11P power gating" to get_reset_cause
>>>
>>> arch/arm/cpu/arm1136/mx31/generic.c | 2 ++
>>> board/freescale/mx6qsabrelite/mx6qsabrelite.c | 8 ++++----
>>> include/configs/efikamx.h | 2 +-
>>> include/configs/mx31pdk.h | 2 +-
>>> include/configs/mx51evk.h | 2 +-
>>> include/configs/mx53evk.h | 2 +-
>>> include/configs/mx53smd.h | 2 +-
>>> include/configs/mx6qsabrelite.h | 1 +
>>> tools/imximage.c | 18 ++++++++++++++----
>>> tools/imximage.h | 1 +
>>> 10 files changed, 27 insertions(+), 13 deletions(-)
>>
>> Applied to u-boot-arm/master, thanks.
>>
>> Amicalement,
>
> Correction: I seem to have misapplied this and the TI tree, so I rolled
> back my changes...
>
> The imx master branch has moved and no longer starts with the commits
> above from the base above. Stefano, can you rebase on u-boot-arm and
> re-issue an up-to-date request?
Yes, you're right- I had to rebase on u-boot.git because I needed some
fixes. I will resend my pull request.
Stefano
>
> Amicalement,
--
=====================================================================
DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: +49-8142-66989-53 Fax: +49-8142-66989-80 Email: sbabic at denx.de
=====================================================================
^ permalink raw reply [flat|nested] 116+ messages in thread
* [U-Boot] [GIT PULL] Pull request: u-boot-imx
2012-03-26 20:45 ` Albert ARIBAUD
@ 2012-03-26 21:08 ` Albert ARIBAUD
2012-03-27 7:39 ` Stefano Babic
0 siblings, 1 reply; 116+ messages in thread
From: Albert ARIBAUD @ 2012-03-26 21:08 UTC (permalink / raw)
To: u-boot
Le 26/03/2012 22:45, Albert ARIBAUD a ?crit :
> Hi Stefano,
>
> Le 08/03/2012 08:52, Stefano Babic a ?crit :
>> Hi Albert,
>>
>> please pull from u-boot-imx, thanks.
>>
>> The following changes since commit
>> 32ec258f829808dd7cf74fd83ba999fdaaeab715:
>>
>> IXP: Fix GPIO_INT_ACT_LOW_SET() (2012-03-08 08:11:45 +0100)
>>
>> are available in the git repository at:
>> git://www.denx.de/git/u-boot-imx.git master
>>
>> Dirk Behme (1):
>> imximage: Remove overwriting of flash_offset
>>
>> Eric Nelson (2):
>> i.MX6: mx6qsabrelite: add ext2 support
>> mx6q: mx6qsabrelite: setup_spi() should be called in board_init to
>> allow use for environment
>>
>> Fabio Estevam (5):
>> mx51evk: Fix CONFIG_SYS_MEMTEST_END
>> mx53evk: Fix CONFIG_SYS_MEMTEST_END
>> mx53smd: Fix CONFIG_SYS_MEMTEST_END
>> efikamx: Fix CONFIG_SYS_MEMTEST_END
>> mx31pdk: Fix CONFIG_SYS_MEMTEST_END
>>
>> Helmut Raiger (1):
>> mx31: add "ARM11P power gating" to get_reset_cause
>>
>> arch/arm/cpu/arm1136/mx31/generic.c | 2 ++
>> board/freescale/mx6qsabrelite/mx6qsabrelite.c | 8 ++++----
>> include/configs/efikamx.h | 2 +-
>> include/configs/mx31pdk.h | 2 +-
>> include/configs/mx51evk.h | 2 +-
>> include/configs/mx53evk.h | 2 +-
>> include/configs/mx53smd.h | 2 +-
>> include/configs/mx6qsabrelite.h | 1 +
>> tools/imximage.c | 18 ++++++++++++++----
>> tools/imximage.h | 1 +
>> 10 files changed, 27 insertions(+), 13 deletions(-)
>
> Applied to u-boot-arm/master, thanks.
>
> Amicalement,
Correction: I seem to have misapplied this and the TI tree, so I rolled
back my changes...
The imx master branch has moved and no longer starts with the commits
above from the base above. Stefano, can you rebase on u-boot-arm and
re-issue an up-to-date request?
Amicalement,
--
Albert.
^ permalink raw reply [flat|nested] 116+ messages in thread
* [U-Boot] [GIT PULL] Pull request: u-boot-imx
2012-03-08 7:52 Stefano Babic
@ 2012-03-26 20:45 ` Albert ARIBAUD
2012-03-26 21:08 ` Albert ARIBAUD
0 siblings, 1 reply; 116+ messages in thread
From: Albert ARIBAUD @ 2012-03-26 20:45 UTC (permalink / raw)
To: u-boot
Hi Stefano,
Le 08/03/2012 08:52, Stefano Babic a ?crit :
> Hi Albert,
>
> please pull from u-boot-imx, thanks.
>
> The following changes since commit 32ec258f829808dd7cf74fd83ba999fdaaeab715:
>
> IXP: Fix GPIO_INT_ACT_LOW_SET() (2012-03-08 08:11:45 +0100)
>
> are available in the git repository at:
> git://www.denx.de/git/u-boot-imx.git master
>
> Dirk Behme (1):
> imximage: Remove overwriting of flash_offset
>
> Eric Nelson (2):
> i.MX6: mx6qsabrelite: add ext2 support
> mx6q: mx6qsabrelite: setup_spi() should be called in board_init to
> allow use for environment
>
> Fabio Estevam (5):
> mx51evk: Fix CONFIG_SYS_MEMTEST_END
> mx53evk: Fix CONFIG_SYS_MEMTEST_END
> mx53smd: Fix CONFIG_SYS_MEMTEST_END
> efikamx: Fix CONFIG_SYS_MEMTEST_END
> mx31pdk: Fix CONFIG_SYS_MEMTEST_END
>
> Helmut Raiger (1):
> mx31: add "ARM11P power gating" to get_reset_cause
>
> arch/arm/cpu/arm1136/mx31/generic.c | 2 ++
> board/freescale/mx6qsabrelite/mx6qsabrelite.c | 8 ++++----
> include/configs/efikamx.h | 2 +-
> include/configs/mx31pdk.h | 2 +-
> include/configs/mx51evk.h | 2 +-
> include/configs/mx53evk.h | 2 +-
> include/configs/mx53smd.h | 2 +-
> include/configs/mx6qsabrelite.h | 1 +
> tools/imximage.c | 18 ++++++++++++++----
> tools/imximage.h | 1 +
> 10 files changed, 27 insertions(+), 13 deletions(-)
Applied to u-boot-arm/master, thanks.
Amicalement,
--
Albert.
^ permalink raw reply [flat|nested] 116+ messages in thread
* [U-Boot] [GIT PULL] Pull request: u-boot-imx
@ 2012-03-08 7:52 Stefano Babic
2012-03-26 20:45 ` Albert ARIBAUD
0 siblings, 1 reply; 116+ messages in thread
From: Stefano Babic @ 2012-03-08 7:52 UTC (permalink / raw)
To: u-boot
Hi Albert,
please pull from u-boot-imx, thanks.
The following changes since commit 32ec258f829808dd7cf74fd83ba999fdaaeab715:
IXP: Fix GPIO_INT_ACT_LOW_SET() (2012-03-08 08:11:45 +0100)
are available in the git repository at:
git://www.denx.de/git/u-boot-imx.git master
Dirk Behme (1):
imximage: Remove overwriting of flash_offset
Eric Nelson (2):
i.MX6: mx6qsabrelite: add ext2 support
mx6q: mx6qsabrelite: setup_spi() should be called in board_init to
allow use for environment
Fabio Estevam (5):
mx51evk: Fix CONFIG_SYS_MEMTEST_END
mx53evk: Fix CONFIG_SYS_MEMTEST_END
mx53smd: Fix CONFIG_SYS_MEMTEST_END
efikamx: Fix CONFIG_SYS_MEMTEST_END
mx31pdk: Fix CONFIG_SYS_MEMTEST_END
Helmut Raiger (1):
mx31: add "ARM11P power gating" to get_reset_cause
arch/arm/cpu/arm1136/mx31/generic.c | 2 ++
board/freescale/mx6qsabrelite/mx6qsabrelite.c | 8 ++++----
include/configs/efikamx.h | 2 +-
include/configs/mx31pdk.h | 2 +-
include/configs/mx51evk.h | 2 +-
include/configs/mx53evk.h | 2 +-
include/configs/mx53smd.h | 2 +-
include/configs/mx6qsabrelite.h | 1 +
tools/imximage.c | 18 ++++++++++++++----
tools/imximage.h | 1 +
10 files changed, 27 insertions(+), 13 deletions(-)
--
=====================================================================
DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: +49-8142-66989-0 Fax: +49-8142-66989-80 Email: office at denx.de
=====================================================================
^ permalink raw reply [flat|nested] 116+ messages in thread
* [U-Boot] [GIT PULL] Pull request: u-boot-imx
2012-03-03 11:38 Stefano Babic
@ 2012-03-05 12:37 ` Albert ARIBAUD
0 siblings, 0 replies; 116+ messages in thread
From: Albert ARIBAUD @ 2012-03-05 12:37 UTC (permalink / raw)
To: u-boot
Hi Stefano,
Le 03/03/2012 12:38, Stefano Babic a ?crit :
> Hi Albert,
>
> please pull from u-boot-imx, thanks.
>
> The following changes since commit 2271e7c6e8eef883b834fb7d07911848a54fde13:
>
> Ethernut 5: fix build error (2012-02-29 01:06:56 +0100)
>
> are available in the git repository at:
> git://www.denx.de/git/u-boot-imx.git master
>
> Dirk Behme (1):
> mx6q: mx6qsabrelite: Update the README
>
> Marek Vasut (3):
> M28: Fix LCD PINMUX
> M28: Support for the old M28 SoM v1.0
> i.MX28: Reformat the DRAM memory configuration data
>
> Robert Delien (5):
> i.mx28: Added register definitions for DIGCTL registers
> i.mx28: Replaced magic numbers for scratch register addresses with
> register definitions
> Renamed mx28_register to mx28_register_32 to prepare for
> mx28_register_8
> Introducing 8-bit wide register, mx28_register_8
> Fix erroneous 32-bit access to hw_clkctrl_frac0 and
> hw_clkctrl_frac1 registers
>
> Wolfgang Grandegger (2):
> usb/ehci: Add USB support for the MX6Q
> mx6qsabrelite: add and enable USB Host 1 support
>
> arch/arm/cpu/arm926ejs/mx28/clock.c | 74 +++-----
> arch/arm/cpu/arm926ejs/mx28/iomux.c | 6 +-
> arch/arm/cpu/arm926ejs/mx28/mx28.c | 14 +-
> arch/arm/cpu/arm926ejs/mx28/spl_mem_init.c | 120 ++++++------
> arch/arm/cpu/armv7/mx6/clock.c | 13 ++
> arch/arm/include/asm/arch-mx28/imx-regs.h | 1 +
> arch/arm/include/asm/arch-mx28/regs-apbh.h | 254
> ++++++++++++------------
> arch/arm/include/asm/arch-mx28/regs-bch.h | 42 ++--
> arch/arm/include/asm/arch-mx28/regs-clkctrl.h | 98 ++++------
> arch/arm/include/asm/arch-mx28/regs-common.h | 28 ++-
> arch/arm/include/asm/arch-mx28/regs-digctl.h | 155 +++++++++++++++
> arch/arm/include/asm/arch-mx28/regs-gpmi.h | 26 ++--
> arch/arm/include/asm/arch-mx28/regs-i2c.h | 28 ++--
> arch/arm/include/asm/arch-mx28/regs-ocotp.h | 86 ++++----
> arch/arm/include/asm/arch-mx28/regs-pinctrl.h | 168 ++++++++--------
> arch/arm/include/asm/arch-mx28/regs-power.h | 28 ++--
> arch/arm/include/asm/arch-mx28/regs-rtc.h | 28 ++--
> arch/arm/include/asm/arch-mx28/regs-ssp.h | 40 ++--
> arch/arm/include/asm/arch-mx28/regs-timrot.h | 38 ++--
> arch/arm/include/asm/arch-mx28/regs-usbphy.h | 20 +-
> arch/arm/include/asm/arch-mx28/sys_proto.h | 10 +-
> arch/arm/include/asm/arch-mx6/clock.h | 1 +
> arch/arm/include/asm/arch-mx6/imx-regs.h | 3 +
> board/denx/m28evk/spl_boot.c | 16 +-
> board/freescale/mx6qsabrelite/mx6qsabrelite.c | 18 ++
> doc/README.mx6qsabrelite | 12 +-
> drivers/gpio/mxs_gpio.c | 16 +-
> drivers/usb/host/Makefile | 1 +
> drivers/usb/host/ehci-mx6.c | 205 ++++++++++++++++++++
> drivers/usb/host/ehci-mxs.c | 8 +-
> include/configs/mx6qsabrelite.h | 13 ++
> 31 files changed, 988 insertions(+), 582 deletions(-)
> create mode 100644 arch/arm/include/asm/arch-mx28/regs-digctl.h
> create mode 100644 drivers/usb/host/ehci-mx6.c
>
> Best regards,
> Stefano Babic
Applied to u-boot-arm/master, thanks.
Amicalement,
--
Albert.
^ permalink raw reply [flat|nested] 116+ messages in thread
* [U-Boot] [GIT PULL] Pull request: u-boot-imx
@ 2012-03-03 11:38 Stefano Babic
2012-03-05 12:37 ` Albert ARIBAUD
0 siblings, 1 reply; 116+ messages in thread
From: Stefano Babic @ 2012-03-03 11:38 UTC (permalink / raw)
To: u-boot
Hi Albert,
please pull from u-boot-imx, thanks.
The following changes since commit 2271e7c6e8eef883b834fb7d07911848a54fde13:
Ethernut 5: fix build error (2012-02-29 01:06:56 +0100)
are available in the git repository at:
git://www.denx.de/git/u-boot-imx.git master
Dirk Behme (1):
mx6q: mx6qsabrelite: Update the README
Marek Vasut (3):
M28: Fix LCD PINMUX
M28: Support for the old M28 SoM v1.0
i.MX28: Reformat the DRAM memory configuration data
Robert Delien (5):
i.mx28: Added register definitions for DIGCTL registers
i.mx28: Replaced magic numbers for scratch register addresses with
register definitions
Renamed mx28_register to mx28_register_32 to prepare for
mx28_register_8
Introducing 8-bit wide register, mx28_register_8
Fix erroneous 32-bit access to hw_clkctrl_frac0 and
hw_clkctrl_frac1 registers
Wolfgang Grandegger (2):
usb/ehci: Add USB support for the MX6Q
mx6qsabrelite: add and enable USB Host 1 support
arch/arm/cpu/arm926ejs/mx28/clock.c | 74 +++-----
arch/arm/cpu/arm926ejs/mx28/iomux.c | 6 +-
arch/arm/cpu/arm926ejs/mx28/mx28.c | 14 +-
arch/arm/cpu/arm926ejs/mx28/spl_mem_init.c | 120 ++++++------
arch/arm/cpu/armv7/mx6/clock.c | 13 ++
arch/arm/include/asm/arch-mx28/imx-regs.h | 1 +
arch/arm/include/asm/arch-mx28/regs-apbh.h | 254
++++++++++++------------
arch/arm/include/asm/arch-mx28/regs-bch.h | 42 ++--
arch/arm/include/asm/arch-mx28/regs-clkctrl.h | 98 ++++------
arch/arm/include/asm/arch-mx28/regs-common.h | 28 ++-
arch/arm/include/asm/arch-mx28/regs-digctl.h | 155 +++++++++++++++
arch/arm/include/asm/arch-mx28/regs-gpmi.h | 26 ++--
arch/arm/include/asm/arch-mx28/regs-i2c.h | 28 ++--
arch/arm/include/asm/arch-mx28/regs-ocotp.h | 86 ++++----
arch/arm/include/asm/arch-mx28/regs-pinctrl.h | 168 ++++++++--------
arch/arm/include/asm/arch-mx28/regs-power.h | 28 ++--
arch/arm/include/asm/arch-mx28/regs-rtc.h | 28 ++--
arch/arm/include/asm/arch-mx28/regs-ssp.h | 40 ++--
arch/arm/include/asm/arch-mx28/regs-timrot.h | 38 ++--
arch/arm/include/asm/arch-mx28/regs-usbphy.h | 20 +-
arch/arm/include/asm/arch-mx28/sys_proto.h | 10 +-
arch/arm/include/asm/arch-mx6/clock.h | 1 +
arch/arm/include/asm/arch-mx6/imx-regs.h | 3 +
board/denx/m28evk/spl_boot.c | 16 +-
board/freescale/mx6qsabrelite/mx6qsabrelite.c | 18 ++
doc/README.mx6qsabrelite | 12 +-
drivers/gpio/mxs_gpio.c | 16 +-
drivers/usb/host/Makefile | 1 +
drivers/usb/host/ehci-mx6.c | 205 ++++++++++++++++++++
drivers/usb/host/ehci-mxs.c | 8 +-
include/configs/mx6qsabrelite.h | 13 ++
31 files changed, 988 insertions(+), 582 deletions(-)
create mode 100644 arch/arm/include/asm/arch-mx28/regs-digctl.h
create mode 100644 drivers/usb/host/ehci-mx6.c
Best regards,
Stefano Babic
--
=====================================================================
DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: +49-8142-66989-0 Fax: +49-8142-66989-80 Email: office at denx.de
=====================================================================
^ permalink raw reply [flat|nested] 116+ messages in thread
* [U-Boot] [GIT PULL] Pull request: u-boot-imx
2012-02-20 7:10 Stefano Babic
@ 2012-02-20 7:54 ` Albert ARIBAUD
0 siblings, 0 replies; 116+ messages in thread
From: Albert ARIBAUD @ 2012-02-20 7:54 UTC (permalink / raw)
To: u-boot
Hi Stefano,
Le 20/02/2012 08:10, Stefano Babic a ?crit :
> Hi Albert,
>
> please pull from u-boot-imx, thanks.
>
> The following changes since commit 4608adb8f66f3a70379fcc108755f88454af0d08:
>
> integrator: update the Integrator/CP config (2012-02-18 16:44:39 +0100)
>
> are available in the git repository at:
> git://www.denx.de/git/u-boot-imx.git master
>
> Helmut Raiger (3):
> tt01: fix environment size
> tt01: add video support
> tt01: fix hush parser config, add release config
>
> Troy Kisky (5):
> net: fec_mxc: add 1000 Mbps selection
> net: fec_mxc: add PHYLIB support
> net: phy: add support for Micrel's KSZ9021
> net: phy: make board_phy_config responsible for calling drv->config
> i.mx6q: mx6qsabrelite: Update the network configuration
>
> arch/arm/include/asm/arch-mx31/sys_proto.h | 1 +
> arch/arm/include/asm/arch-mx6/imx-regs.h | 1 +
> board/freescale/corenet_ds/eth_p4080.c | 2 +
> board/freescale/mpc8544ds/mpc8544ds.c | 2 +
> board/freescale/mx6qsabrelite/mx6qsabrelite.c | 47 ++-----
> board/hale/tt01/tt01.c | 21 +++
> drivers/net/fec_mxc.c | 165
> +++++++++++++++++--------
> drivers/net/fec_mxc.h | 7 +
> drivers/net/phy/micrel.c | 87 +++++++++++++
> drivers/net/phy/phy.c | 5 +-
> include/configs/mx6qsabrelite.h | 2 +
> include/configs/tt01.h | 40 ++++++-
> include/micrel.h | 16 +++
> include/phy.h | 1 +
> 14 files changed, 307 insertions(+), 90 deletions(-)
> create mode 100644 include/micrel.h
Applied to u-boot-arm/master, thanks!
Amicalement,
--
Albert.
^ permalink raw reply [flat|nested] 116+ messages in thread
* [U-Boot] [GIT PULL] Pull request: u-boot-imx
@ 2012-02-20 7:10 Stefano Babic
2012-02-20 7:54 ` Albert ARIBAUD
0 siblings, 1 reply; 116+ messages in thread
From: Stefano Babic @ 2012-02-20 7:10 UTC (permalink / raw)
To: u-boot
Hi Albert,
please pull from u-boot-imx, thanks.
The following changes since commit 4608adb8f66f3a70379fcc108755f88454af0d08:
integrator: update the Integrator/CP config (2012-02-18 16:44:39 +0100)
are available in the git repository at:
git://www.denx.de/git/u-boot-imx.git master
Helmut Raiger (3):
tt01: fix environment size
tt01: add video support
tt01: fix hush parser config, add release config
Troy Kisky (5):
net: fec_mxc: add 1000 Mbps selection
net: fec_mxc: add PHYLIB support
net: phy: add support for Micrel's KSZ9021
net: phy: make board_phy_config responsible for calling drv->config
i.mx6q: mx6qsabrelite: Update the network configuration
arch/arm/include/asm/arch-mx31/sys_proto.h | 1 +
arch/arm/include/asm/arch-mx6/imx-regs.h | 1 +
board/freescale/corenet_ds/eth_p4080.c | 2 +
board/freescale/mpc8544ds/mpc8544ds.c | 2 +
board/freescale/mx6qsabrelite/mx6qsabrelite.c | 47 ++-----
board/hale/tt01/tt01.c | 21 +++
drivers/net/fec_mxc.c | 165
+++++++++++++++++--------
drivers/net/fec_mxc.h | 7 +
drivers/net/phy/micrel.c | 87 +++++++++++++
drivers/net/phy/phy.c | 5 +-
include/configs/mx6qsabrelite.h | 2 +
include/configs/tt01.h | 40 ++++++-
include/micrel.h | 16 +++
include/phy.h | 1 +
14 files changed, 307 insertions(+), 90 deletions(-)
create mode 100644 include/micrel.h
--
=====================================================================
DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: +49-8142-66989-0 Fax: +49-8142-66989-80 Email: office at denx.de
=====================================================================
^ permalink raw reply [flat|nested] 116+ messages in thread
* [U-Boot] [GIT PULL] Pull request: u-boot-imx
2012-02-12 16:06 Stefano Babic
@ 2012-02-13 8:03 ` Albert ARIBAUD
0 siblings, 0 replies; 116+ messages in thread
From: Albert ARIBAUD @ 2012-02-13 8:03 UTC (permalink / raw)
To: u-boot
Hi Stefano,
Le 12/02/2012 17:06, Stefano Babic a ?crit :
> Hi Albert,
>
> please pull from u-boot-imx.
>
> The following changes since commit 9a3aae22edf1eda6326cc51c28631ca5c23b7706:
>
> arm, davinci: Add support for the Calimain board from OMICRON
> electronics (2012-02-12 10:11:33 +0100)
>
> are available in the git repository at:
> git://www.denx.de/git/u-boot-imx.git master
>
> Eric Nelson (6):
> mx6q: define GPIO macros for translating between ordinals and
> port:index
> mxc_spi: move machine specifics into CPU headers
> mx6q: Add support for ECSPI through mxc_spi driver
> mx6q: mx6qsabrelite: Add ECSPI support to the Sabrelite platform
> mx6q: mx6qsabrelite: Provide default serial flash bus and chip-select
> mx6q: mx6qsabrelite: Conditionally define macros for environment
> in serial flash
>
> Fabio Estevam (7):
> mx53loco: Use gpio_direction_input prior to gpio_get_value
> mx53ard: Use gpio_direction_input prior to gpio_get_value
> mx53evk: Use gpio_direction_input prior to gpio_get_value
> mx53smd: Use gpio_direction_input prior to gpio_get_value
> mx51evk: Use gpio_direction_input prior to gpio_get_value
> mx35: generic: Let get_reset_cause be defined only when
> CONFIG_DISPLAY_CPUINFO is selected
> mx35pdk: Remove duplicate CPU revision and reset cause information
>
> Marek Vasut (2):
> i.MX28: Fix VDDIO and VDDA setup
> MX28: Fix get_timer() / get_tbclk() issue
>
> Matthias Fuchs (4):
> mx28evk: add RTC support
> mx28evk: add USB support
> mx28evk: add SPI support
> mx28: fix SPL code to make USB booting work
>
> Shawn Guo (1):
> common/image.c: align usage of fdt_high with initrd_high
>
> Stefano Babic (4):
> MX35: add missing get_ticks() and get_tbclk()
> MX31: add missing get_tbclk()
> MX5/MX6: add missing get_ticks() and get_tbclk()
> MX27: add missing get_tbclk()
>
> README | 8 ++
> arch/arm/cpu/arm1136/mx31/timer.c | 9 ++
> arch/arm/cpu/arm1136/mx35/generic.c | 2 +-
> arch/arm/cpu/arm1136/mx35/timer.c | 103
> +++++++++++++++---------
> arch/arm/cpu/arm926ejs/mx27/timer.c | 5 +
> arch/arm/cpu/arm926ejs/mx28/spl_power_init.c | 16 +++-
> arch/arm/cpu/arm926ejs/mx28/start.S | 21 +++++-
> arch/arm/cpu/arm926ejs/mx28/timer.c | 19 ++++-
> arch/arm/cpu/armv7/imx-common/timer.c | 75 ++++++++++++++-----
> arch/arm/include/asm/arch-mx31/imx-regs.h | 27 +++++++
> arch/arm/include/asm/arch-mx35/imx-regs.h | 25 ++++++
> arch/arm/include/asm/arch-mx5/imx-regs.h | 30 +++++++
> arch/arm/include/asm/arch-mx6/imx-regs.h | 48 ++++++++++++
> board/freescale/mx28evk/iomux.c | 8 ++
> board/freescale/mx28evk/mx28evk.c | 7 ++
> board/freescale/mx35pdk/mx35pdk.c | 27 +------
> board/freescale/mx51evk/mx51evk.c | 2 +
> board/freescale/mx53ard/mx53ard.c | 2 +
> board/freescale/mx53evk/mx53evk.c | 2 +
> board/freescale/mx53loco/mx53loco.c | 2 +
> board/freescale/mx53smd/mx53smd.c | 1 +
> board/freescale/mx6qsabrelite/imximage.cfg | 2 +-
> board/freescale/mx6qsabrelite/mx6qsabrelite.c | 25 ++++++
> common/image.c | 12 +--
> drivers/spi/mxc_spi.c | 93
> ++---------------------
> include/configs/mx28evk.h | 64 +++++++++++++++-
> include/configs/mx6qsabrelite.h | 29 ++++++-
> 27 files changed, 472 insertions(+), 192 deletions(-)
>
> Best regards,
> Stefano
Applied to u-boot-arm/master, thanks!
(that's not on u-boot/master yet though, as my pull request was sent out
before this one)
Amicalement,
--
Albert.
^ permalink raw reply [flat|nested] 116+ messages in thread
* [U-Boot] [GIT PULL] Pull request: u-boot-imx
@ 2012-02-12 16:06 Stefano Babic
2012-02-13 8:03 ` Albert ARIBAUD
0 siblings, 1 reply; 116+ messages in thread
From: Stefano Babic @ 2012-02-12 16:06 UTC (permalink / raw)
To: u-boot
Hi Albert,
please pull from u-boot-imx.
The following changes since commit 9a3aae22edf1eda6326cc51c28631ca5c23b7706:
arm, davinci: Add support for the Calimain board from OMICRON
electronics (2012-02-12 10:11:33 +0100)
are available in the git repository at:
git://www.denx.de/git/u-boot-imx.git master
Eric Nelson (6):
mx6q: define GPIO macros for translating between ordinals and
port:index
mxc_spi: move machine specifics into CPU headers
mx6q: Add support for ECSPI through mxc_spi driver
mx6q: mx6qsabrelite: Add ECSPI support to the Sabrelite platform
mx6q: mx6qsabrelite: Provide default serial flash bus and chip-select
mx6q: mx6qsabrelite: Conditionally define macros for environment
in serial flash
Fabio Estevam (7):
mx53loco: Use gpio_direction_input prior to gpio_get_value
mx53ard: Use gpio_direction_input prior to gpio_get_value
mx53evk: Use gpio_direction_input prior to gpio_get_value
mx53smd: Use gpio_direction_input prior to gpio_get_value
mx51evk: Use gpio_direction_input prior to gpio_get_value
mx35: generic: Let get_reset_cause be defined only when
CONFIG_DISPLAY_CPUINFO is selected
mx35pdk: Remove duplicate CPU revision and reset cause information
Marek Vasut (2):
i.MX28: Fix VDDIO and VDDA setup
MX28: Fix get_timer() / get_tbclk() issue
Matthias Fuchs (4):
mx28evk: add RTC support
mx28evk: add USB support
mx28evk: add SPI support
mx28: fix SPL code to make USB booting work
Shawn Guo (1):
common/image.c: align usage of fdt_high with initrd_high
Stefano Babic (4):
MX35: add missing get_ticks() and get_tbclk()
MX31: add missing get_tbclk()
MX5/MX6: add missing get_ticks() and get_tbclk()
MX27: add missing get_tbclk()
README | 8 ++
arch/arm/cpu/arm1136/mx31/timer.c | 9 ++
arch/arm/cpu/arm1136/mx35/generic.c | 2 +-
arch/arm/cpu/arm1136/mx35/timer.c | 103
+++++++++++++++---------
arch/arm/cpu/arm926ejs/mx27/timer.c | 5 +
arch/arm/cpu/arm926ejs/mx28/spl_power_init.c | 16 +++-
arch/arm/cpu/arm926ejs/mx28/start.S | 21 +++++-
arch/arm/cpu/arm926ejs/mx28/timer.c | 19 ++++-
arch/arm/cpu/armv7/imx-common/timer.c | 75 ++++++++++++++-----
arch/arm/include/asm/arch-mx31/imx-regs.h | 27 +++++++
arch/arm/include/asm/arch-mx35/imx-regs.h | 25 ++++++
arch/arm/include/asm/arch-mx5/imx-regs.h | 30 +++++++
arch/arm/include/asm/arch-mx6/imx-regs.h | 48 ++++++++++++
board/freescale/mx28evk/iomux.c | 8 ++
board/freescale/mx28evk/mx28evk.c | 7 ++
board/freescale/mx35pdk/mx35pdk.c | 27 +------
board/freescale/mx51evk/mx51evk.c | 2 +
board/freescale/mx53ard/mx53ard.c | 2 +
board/freescale/mx53evk/mx53evk.c | 2 +
board/freescale/mx53loco/mx53loco.c | 2 +
board/freescale/mx53smd/mx53smd.c | 1 +
board/freescale/mx6qsabrelite/imximage.cfg | 2 +-
board/freescale/mx6qsabrelite/mx6qsabrelite.c | 25 ++++++
common/image.c | 12 +--
drivers/spi/mxc_spi.c | 93
++---------------------
include/configs/mx28evk.h | 64 +++++++++++++++-
include/configs/mx6qsabrelite.h | 29 ++++++-
27 files changed, 472 insertions(+), 192 deletions(-)
Best regards,
Stefano
--
=====================================================================
DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: +49-8142-66989-0 Fax: +49-8142-66989-80 Email: office at denx.de
=====================================================================
^ permalink raw reply [flat|nested] 116+ messages in thread
* [U-Boot] [GIT PULL] Pull request: u-boot-imx
2012-02-04 16:57 ` Albert ARIBAUD
@ 2012-02-05 13:32 ` Stefano Babic
0 siblings, 0 replies; 116+ messages in thread
From: Stefano Babic @ 2012-02-05 13:32 UTC (permalink / raw)
To: u-boot
On 04/02/2012 17:57, Albert ARIBAUD wrote:
> Hi Stefano,
>
Hi Albert,
> Do you want me to ignore these and honor the initial 11-commit pull
> request, or would you prefer to issue an [UPDATE] pull req for the whole
> 16 commits?
I send yaou an update pull req, thanks.
Stefano
--
=====================================================================
DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: +49-8142-66989-0 Fax: +49-8142-66989-80 Email: office at denx.de
=====================================================================
^ permalink raw reply [flat|nested] 116+ messages in thread
* [U-Boot] [GIT PULL] Pull request: u-boot-imx
2012-01-22 13:06 Stefano Babic
@ 2012-02-04 16:57 ` Albert ARIBAUD
2012-02-05 13:32 ` Stefano Babic
0 siblings, 1 reply; 116+ messages in thread
From: Albert ARIBAUD @ 2012-02-04 16:57 UTC (permalink / raw)
To: u-boot
Hi Stefano,
Le 22/01/2012 14:06, Stefano Babic a ?crit :
> Hi Albert,
>
> please pull from u-boot-imx, thanks.
>
> The following changes since commit 5d250e52ffd5554834a45ac8d53762fbbf36933c:
>
> tegra2: Enable data cache (2012-01-18 15:54:07 -0700)
>
> are available in the git repository at:
> git://www.denx.de/git/u-boot-imx.git master
This branch has moved since the pull request and now includes, in
addition to the 11 commits mentioned in your request, the following 5
new commits:
Fabio Estevam (1):
mx28: Show CPU frequency
Helmut Raiger (2):
mc13783.h: create and add regulator mode 0 and 1
tt01: add MMC support
Jason Liu (1):
i.mx: i.mx5: update imx_get_mac_from_fuse function
Matthias Fuchs (1):
mx28: fix i.MX28 spi driver
Do you want me to ignore these and honor the initial 11-commit pull
request, or would you prefer to issue an [UPDATE] pull req for the whole
16 commits?
Amicalement,
--
Albert.
^ permalink raw reply [flat|nested] 116+ messages in thread
* [U-Boot] [GIT PULL] Pull request: u-boot-imx
@ 2012-01-22 13:06 Stefano Babic
2012-02-04 16:57 ` Albert ARIBAUD
0 siblings, 1 reply; 116+ messages in thread
From: Stefano Babic @ 2012-01-22 13:06 UTC (permalink / raw)
To: u-boot
Hi Albert,
please pull from u-boot-imx, thanks.
The following changes since commit 5d250e52ffd5554834a45ac8d53762fbbf36933c:
tegra2: Enable data cache (2012-01-18 15:54:07 -0700)
are available in the git repository at:
git://www.denx.de/git/u-boot-imx.git master
Dirk Behme (4):
imximage: Add MX53 to the documentation
imximage: Add support for i.MX6
imximage: Sort bootops alphabetically
i.mx6q: configs: Add fdt_high and initrd_high variables
Fabio Estevam (2):
sdhc_boot: Introduce CONFIG_FSL_FIXED_MMC_LOCATION option
configs: Remove CONFIG_NET_MULTI from board files
Helmut Raiger (1):
mmc: access mxcmmc from mx31 boards
Jason Liu (1):
i.mx6q: mx6qsabrelite: Add the ethernet function support
Stefano Babic (1):
imx6: mx6qarm2: updated board_mmc_getcd() to the new prototype
Troy Kisky (2):
i.mx6: mx6x_pins: Fix uart txd definitions
i.mx6q: mx6qsabrelite: Setup uart1 pinmux
arch/arm/cpu/arm1136/mx31/generic.c | 1 +
arch/arm/cpu/arm926ejs/mx27/generic.c | 35 ++++++--
arch/arm/include/asm/arch-mx27/clock.h | 22 ++---
arch/arm/include/asm/arch-mx31/clock.h | 3 +-
arch/arm/include/asm/arch-mx31/imx-regs.h | 11 +++
arch/arm/include/asm/arch-mx31/sys_proto.h | 2 +-
arch/arm/include/asm/arch-mx6/mx6x_pins.h | 36 +++-----
board/freescale/common/Makefile | 2 +-
board/freescale/mx6qarm2/mx6qarm2.c | 9 +-
board/freescale/mx6qsabrelite/mx6qsabrelite.c | 114
+++++++++++++++++++++++++
doc/README.imximage | 13 ++--
drivers/mmc/mxcmmc.c | 8 +-
include/configs/MPC8536DS.h | 1 +
include/configs/P1010RDB.h | 5 +-
include/configs/P1_P2_RDB.h | 1 +
include/configs/P2020COME.h | 1 +
include/configs/P2020DS.h | 1 +
include/configs/P2041RDB.h | 1 +
include/configs/PM826.h | 2 -
include/configs/PM828.h | 2 -
include/configs/cam_enc_4xx.h | 1 -
include/configs/coreboot.h | 6 --
include/configs/corenet_ds.h | 1 +
include/configs/ecovec.h | 1 -
include/configs/efikamx.h | 1 -
include/configs/enbw_cmc.h | 1 -
include/configs/ethernut5.h | 1 -
include/configs/flea3.h | 1 -
include/configs/m28evk.h | 1 -
include/configs/mx6qarm2.h | 2 +
include/configs/mx6qsabrelite.h | 15 +++-
include/configs/omap3_evm_common.h | 1 -
include/configs/omap3_mvblx.h | 1 -
include/configs/p1_p2_rdb_pc.h | 7 +--
include/configs/tam3517-common.h | 1 -
tools/imximage.c | 8 +-
tools/imximage.h | 2 +
37 files changed, 222 insertions(+), 99 deletions(-)
--
=====================================================================
DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: +49-8142-66989-0 Fax: +49-8142-66989-80 Email: office at denx.de
=====================================================================
^ permalink raw reply [flat|nested] 116+ messages in thread
* [U-Boot] [GIT PULL] Pull request: u-boot-imx
2012-01-04 16:57 Stefano Babic
2012-01-04 17:41 ` Fabio Estevam
@ 2012-01-12 22:01 ` Albert ARIBAUD
1 sibling, 0 replies; 116+ messages in thread
From: Albert ARIBAUD @ 2012-01-12 22:01 UTC (permalink / raw)
To: u-boot
Hi Stefano,
Le 04/01/2012 17:57, Stefano Babic a ?crit :
> Hi Albert,
>
> please pull from u-boot-imx, thanks.
>
> The following changes since commit a747cc0a8c55d69a56a6db80a35cdb48c853447d:
>
> tegra2: Optimize out-of-tree build for Ventana. (2011-12-24 10:23:32
> +0100)
>
> are available in the git repository at:
> git://www.denx.de/git/u-boot-imx.git master
>
> Eric Nelson (1):
> i.mx6q: mx6qarm2: Enable the usboh3 clock
>
> Fabio Estevam (6):
> net: imx: Add multi-FEC support for imx_get_mac_from_fuse
> mx28: Let imx_get_mac_from_fuse be common for mx28
> mx28: Let dram_init be common for mx28
> mx28evk: Add initial support for MX28EVK board
> mx28evk: Remove 'all' target from Makefile
> m28evk: Use GENERATED_GBL_DATA_SIZE
>
> Jason Liu (4):
> i.mx: i.mx6q: Add the enet clock function
> fec: add the i.mx6q enet driver support
> i.mx6q: arm2: Add the enet function support
> i.mx6:imx6q: allign MAC address with burned-in ordering
>
> Marek Vasut (1):
> MX28: Fix MXSBOOT segfault if no params specified
>
> Veli-Pekka Peltola (1):
> mx28: remove omap specific config options
>
> MAINTAINERS | 1 +
> arch/arm/cpu/arm1136/mx35/generic.c | 2 +-
> arch/arm/cpu/arm926ejs/mx25/generic.c | 2 +-
> arch/arm/cpu/arm926ejs/mx27/generic.c | 2 +-
> arch/arm/cpu/arm926ejs/mx28/mx28.c | 67 +++++++++++
> arch/arm/cpu/arm926ejs/mx28/start.S | 6 -
> arch/arm/cpu/armv7/mx6/clock.c | 5 +
> arch/arm/cpu/armv7/mx6/soc.c | 16 ++-
> arch/arm/include/asm/arch-mx28/sys_proto.h | 2 +
> arch/arm/include/asm/arch-mx6/imx-regs.h | 4 +-
> board/denx/m28evk/m28evk.c | 53 +--------
> board/freescale/mx28evk/Makefile | 47 ++++++++
> board/freescale/mx28evk/iomux.c | 138 ++++++++++++++++++++++
> board/freescale/mx28evk/mx28evk.c | 169
> ++++++++++++++++++++++++++
> board/freescale/mx28evk/u-boot.bd | 14 +++
> board/freescale/mx6qarm2/imximage.cfg | 2 +-
> board/freescale/mx6qarm2/mx6qarm2.c | 90 ++++++++++++++
> boards.cfg | 1 +
> drivers/net/fec_mxc.c | 19 +++-
> drivers/net/fec_mxc.h | 9 +-
> include/configs/m28evk.h | 9 ++-
> include/configs/mx28evk.h | 176
> ++++++++++++++++++++++++++++
> include/configs/mx6qarm2.h | 12 ++-
> tools/mxsboot.c | 3 +
> 24 files changed, 769 insertions(+), 80 deletions(-)
> create mode 100644 board/freescale/mx28evk/Makefile
> create mode 100644 board/freescale/mx28evk/iomux.c
> create mode 100644 board/freescale/mx28evk/mx28evk.c
> create mode 100644 board/freescale/mx28evk/u-boot.bd
> create mode 100644 include/configs/mx28evk.h
Applied to u-boot-arm/master, thanks!
Amicalement,
--
Albert.
^ permalink raw reply [flat|nested] 116+ messages in thread
* [U-Boot] [GIT PULL] Pull request: u-boot-imx
2012-01-04 17:41 ` Fabio Estevam
@ 2012-01-04 17:56 ` Stefano Babic
0 siblings, 0 replies; 116+ messages in thread
From: Stefano Babic @ 2012-01-04 17:56 UTC (permalink / raw)
To: u-boot
On 04/01/2012 18:41, Fabio Estevam wrote:
> Hi Stefano,
>
> On Wed, Jan 4, 2012 at 2:57 PM, Stefano Babic <sbabic@denx.de> wrote:
>
>> Fabio Estevam (6):
>> net: imx: Add multi-FEC support for imx_get_mac_from_fuse
>> mx28: Let imx_get_mac_from_fuse be common for mx28
>> mx28: Let dram_init be common for mx28
>> mx28evk: Add initial support for MX28EVK board
>> mx28evk: Remove 'all' target from Makefile
>
> Looks like the similar patch for m28evk is missing.
That's right, thanks, I did not merge it.
>
> Please find it here: http://patchwork.ozlabs.org/patch/133542/
There is no drawbacks for the current pull request if the patch is
missing, and I merge the patch into my next branch for the next time.
Thanks,
Stefano Babic
--
=====================================================================
DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: +49-8142-66989-0 Fax: +49-8142-66989-80 Email: office at denx.de
=====================================================================
^ permalink raw reply [flat|nested] 116+ messages in thread
* [U-Boot] [GIT PULL] Pull request: u-boot-imx
2012-01-04 16:57 Stefano Babic
@ 2012-01-04 17:41 ` Fabio Estevam
2012-01-04 17:56 ` Stefano Babic
2012-01-12 22:01 ` Albert ARIBAUD
1 sibling, 1 reply; 116+ messages in thread
From: Fabio Estevam @ 2012-01-04 17:41 UTC (permalink / raw)
To: u-boot
Hi Stefano,
On Wed, Jan 4, 2012 at 2:57 PM, Stefano Babic <sbabic@denx.de> wrote:
> Fabio Estevam (6):
> ? ? ?net: imx: Add multi-FEC support for imx_get_mac_from_fuse
> ? ? ?mx28: Let imx_get_mac_from_fuse be common for mx28
> ? ? ?mx28: Let dram_init be common for mx28
> ? ? ?mx28evk: Add initial support for MX28EVK board
> ? ? ?mx28evk: Remove 'all' target from Makefile
Looks like the similar patch for m28evk is missing.
Please find it here: http://patchwork.ozlabs.org/patch/133542/
Regards,
Fabio Estevam
^ permalink raw reply [flat|nested] 116+ messages in thread
* [U-Boot] [GIT PULL] Pull request: u-boot-imx
@ 2012-01-04 16:57 Stefano Babic
2012-01-04 17:41 ` Fabio Estevam
2012-01-12 22:01 ` Albert ARIBAUD
0 siblings, 2 replies; 116+ messages in thread
From: Stefano Babic @ 2012-01-04 16:57 UTC (permalink / raw)
To: u-boot
Hi Albert,
please pull from u-boot-imx, thanks.
The following changes since commit a747cc0a8c55d69a56a6db80a35cdb48c853447d:
tegra2: Optimize out-of-tree build for Ventana. (2011-12-24 10:23:32
+0100)
are available in the git repository at:
git://www.denx.de/git/u-boot-imx.git master
Eric Nelson (1):
i.mx6q: mx6qarm2: Enable the usboh3 clock
Fabio Estevam (6):
net: imx: Add multi-FEC support for imx_get_mac_from_fuse
mx28: Let imx_get_mac_from_fuse be common for mx28
mx28: Let dram_init be common for mx28
mx28evk: Add initial support for MX28EVK board
mx28evk: Remove 'all' target from Makefile
m28evk: Use GENERATED_GBL_DATA_SIZE
Jason Liu (4):
i.mx: i.mx6q: Add the enet clock function
fec: add the i.mx6q enet driver support
i.mx6q: arm2: Add the enet function support
i.mx6:imx6q: allign MAC address with burned-in ordering
Marek Vasut (1):
MX28: Fix MXSBOOT segfault if no params specified
Veli-Pekka Peltola (1):
mx28: remove omap specific config options
MAINTAINERS | 1 +
arch/arm/cpu/arm1136/mx35/generic.c | 2 +-
arch/arm/cpu/arm926ejs/mx25/generic.c | 2 +-
arch/arm/cpu/arm926ejs/mx27/generic.c | 2 +-
arch/arm/cpu/arm926ejs/mx28/mx28.c | 67 +++++++++++
arch/arm/cpu/arm926ejs/mx28/start.S | 6 -
arch/arm/cpu/armv7/mx6/clock.c | 5 +
arch/arm/cpu/armv7/mx6/soc.c | 16 ++-
arch/arm/include/asm/arch-mx28/sys_proto.h | 2 +
arch/arm/include/asm/arch-mx6/imx-regs.h | 4 +-
board/denx/m28evk/m28evk.c | 53 +--------
board/freescale/mx28evk/Makefile | 47 ++++++++
board/freescale/mx28evk/iomux.c | 138 ++++++++++++++++++++++
board/freescale/mx28evk/mx28evk.c | 169
++++++++++++++++++++++++++
board/freescale/mx28evk/u-boot.bd | 14 +++
board/freescale/mx6qarm2/imximage.cfg | 2 +-
board/freescale/mx6qarm2/mx6qarm2.c | 90 ++++++++++++++
boards.cfg | 1 +
drivers/net/fec_mxc.c | 19 +++-
drivers/net/fec_mxc.h | 9 +-
include/configs/m28evk.h | 9 ++-
include/configs/mx28evk.h | 176
++++++++++++++++++++++++++++
include/configs/mx6qarm2.h | 12 ++-
tools/mxsboot.c | 3 +
24 files changed, 769 insertions(+), 80 deletions(-)
create mode 100644 board/freescale/mx28evk/Makefile
create mode 100644 board/freescale/mx28evk/iomux.c
create mode 100644 board/freescale/mx28evk/mx28evk.c
create mode 100644 board/freescale/mx28evk/u-boot.bd
create mode 100644 include/configs/mx28evk.h
--
=====================================================================
DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: +49-8142-66989-0 Fax: +49-8142-66989-80 Email: office at denx.de
=====================================================================
^ permalink raw reply [flat|nested] 116+ messages in thread
* [U-Boot] [GIT PULL] Pull request: u-boot-imx
2011-12-19 7:45 Stefano Babic
@ 2011-12-19 8:39 ` Albert ARIBAUD
0 siblings, 0 replies; 116+ messages in thread
From: Albert ARIBAUD @ 2011-12-19 8:39 UTC (permalink / raw)
To: u-boot
Hi Stefano,
Le 19/12/2011 08:45, Stefano Babic a ?crit :
> Hi Albert,
>
> please pull from u-boot-imx (a couple of fixes):
>
> The following changes since commit a7b39185338c333a052728a7952b5f1cba4fc22a:
>
> tools/setlocalversion: Update from the Linux Kernel (2011-12-17
> 20:58:48 +0100)
>
> are available in the git repository at:
> git://www.denx.de/git/u-boot-imx.git master
>
> Anatolij Gustschin (1):
> Fix building for mx51evk board
>
> Marek Vasut (1):
> M28: Fix tab indent in u-boot.bd
>
> board/denx/m28evk/u-boot.bd | 8 ++++----
> board/freescale/mx51evk/mx51evk.c | 3 ++-
> board/freescale/mx53loco/mx53loco.c | 3 ++-
> 3 files changed, 8 insertions(+), 6 deletions(-)
Applied tu u-boot-arm/master, thanks.
Amicalement,
--
Albert.
^ permalink raw reply [flat|nested] 116+ messages in thread
* [U-Boot] [GIT PULL] Pull request: u-boot-imx
@ 2011-12-19 7:45 Stefano Babic
2011-12-19 8:39 ` Albert ARIBAUD
0 siblings, 1 reply; 116+ messages in thread
From: Stefano Babic @ 2011-12-19 7:45 UTC (permalink / raw)
To: u-boot
Hi Albert,
please pull from u-boot-imx (a couple of fixes):
The following changes since commit a7b39185338c333a052728a7952b5f1cba4fc22a:
tools/setlocalversion: Update from the Linux Kernel (2011-12-17
20:58:48 +0100)
are available in the git repository at:
git://www.denx.de/git/u-boot-imx.git master
Anatolij Gustschin (1):
Fix building for mx51evk board
Marek Vasut (1):
M28: Fix tab indent in u-boot.bd
board/denx/m28evk/u-boot.bd | 8 ++++----
board/freescale/mx51evk/mx51evk.c | 3 ++-
board/freescale/mx53loco/mx53loco.c | 3 ++-
3 files changed, 8 insertions(+), 6 deletions(-)
--
=====================================================================
DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: +49-8142-66989-0 Fax: +49-8142-66989-80 Email: office at denx.de
=====================================================================
^ permalink raw reply [flat|nested] 116+ messages in thread
* [U-Boot] [GIT PULL] Pull request: u-boot-imx
2011-12-09 14:34 Stefano Babic
@ 2011-12-09 16:40 ` Albert ARIBAUD
0 siblings, 0 replies; 116+ messages in thread
From: Albert ARIBAUD @ 2011-12-09 16:40 UTC (permalink / raw)
To: u-boot
Hi Stefano,
Le 09/12/2011 15:34, Stefano Babic a ?crit :
> Hi Albert,
>
> please pull from u-boot-imx. It is rebased on u-boot mainline, because
> Wolfgang has already merged your u-boot-arm/master + some fixes.
>
> The following changes since commit d82a27bc5c404da907f71960a3ed2e148ac73fd0:
>
> drivers/net/inca-ip_sw.c: Fix GCC 4.6 build warning (2011-12-08
> 21:01:19 +0100)
>
> are available in the git repository at:
> git://www.denx.de/git/u-boot-imx.git master
>
> Jason Liu (4):
> i.mx: introduce the armv7/imx-common folder
> i.mx: add the initial support for freescale i.MX6Q processor
> i.mx: mxc_gpio: add the i.mx6q support
> i.mx: i.mx6q: add the initial support for i.mx6q ARM2 board
>
> Marek Vasut (4):
> M28: Document that units has to be set to sectors on SD bootcard
> M28: Fix typo
> i.MX28: Move SPL to arch/arm/cpu/arm926ejs/mx28
> M28: Cleanup memsize.o OOT build
>
> MAINTAINERS | 1 +
> Makefile | 8 +
> arch/arm/cpu/arm926ejs/mx28/Makefile | 4 +
> .../arm/cpu/arm926ejs/mx28/mx28_init.h | 0
> arch/arm/cpu/arm926ejs/mx28/spl_boot.c | 78 +
> .../arm/cpu/arm926ejs/mx28/spl_mem_init.c | 2 +-
> .../arm/cpu/arm926ejs/mx28/spl_power_init.c | 2 +-
> .../m28evk => arch/arm/cpu/arm926ejs/mx28}/start.S | 0
> .../arm/cpu/arm926ejs/mx28}/u-boot-spl.lds | 14 +-
> arch/arm/cpu/armv7/imx-common/Makefile | 47 +
> arch/arm/cpu/armv7/imx-common/cpu.c | 108 ++
> arch/arm/cpu/armv7/{mx5 => imx-common}/speed.c | 0
> arch/arm/cpu/armv7/{mx5 => imx-common}/timer.c | 17 +-
> arch/arm/cpu/armv7/mx5/Makefile | 2 +-
> arch/arm/cpu/armv7/mx5/soc.c | 77 -
> arch/arm/cpu/armv7/mx6/lowlevel_init.S | 24 +
> arch/arm/cpu/armv7/mx6/soc.c | 82 +
> arch/arm/include/asm/arch-mx28/sys_proto.h | 6 +
> arch/arm/include/asm/arch-mx6/ccm_regs.h | 892 +++++++++++
> arch/arm/include/asm/arch-mx6/clock.h | 50 +
> arch/arm/include/asm/arch-mx6/gpio.h | 35 +
> arch/arm/include/asm/arch-mx6/imx-regs.h | 236 +++
> arch/arm/include/asm/arch-mx6/iomux-v3.h | 103 ++
> arch/arm/include/asm/arch-mx6/mx6x_pins.h | 1683
> ++++++++++++++++++++
> arch/arm/include/asm/arch-mx6/sys_proto.h | 38 +
> board/denx/m28evk/Makefile | 11 +-
> board/denx/m28evk/m28evk.c | 2 +-
> board/denx/m28evk/{mmc_boot.c => spl_boot.c} | 61 +-
> board/freescale/mx6qarm2/Makefile | 42 +
> board/freescale/mx6qarm2/imximage.cfg | 167 ++
> board/freescale/mx6qarm2/mx6qarm2.c | 155 ++
> boards.cfg | 1 +
> doc/README.m28 | 3 +-
> drivers/gpio/mxc_gpio.c | 4 +-
> include/configs/m28evk.h | 6 +-
> include/configs/mx6qarm2.h | 162 ++
> 39 files changed, 4441 insertions(+), 167 deletions(-)
> rename board/denx/m28evk/m28_init.h =>
> arch/arm/cpu/arm926ejs/mx28/mx28_init.h (100%)
> create mode 100644 arch/arm/cpu/arm926ejs/mx28/spl_boot.c
> rename board/denx/m28evk/mem_init.c =>
> arch/arm/cpu/arm926ejs/mx28/spl_mem_init.c (99%)
> rename board/denx/m28evk/power_init.c =>
> arch/arm/cpu/arm926ejs/mx28/spl_power_init.c (99%)
> rename {board/denx/m28evk => arch/arm/cpu/arm926ejs/mx28}/start.S (100%)
> rename {board/denx/m28evk =>
> arch/arm/cpu/arm926ejs/mx28}/u-boot-spl.lds (93%)
> create mode 100644 arch/arm/cpu/armv7/imx-common/Makefile
> create mode 100644 arch/arm/cpu/armv7/imx-common/cpu.c
> rename arch/arm/cpu/armv7/{mx5 => imx-common}/speed.c (100%)
> rename arch/arm/cpu/armv7/{mx5 => imx-common}/timer.c (84%)
> mode change 100644 => 100755
> create mode 100644 arch/arm/cpu/armv7/mx6/Makefile
> create mode 100644 arch/arm/cpu/armv7/mx6/clock.c
> create mode 100644 arch/arm/cpu/armv7/mx6/iomux-v3.c
> create mode 100644 arch/arm/cpu/armv7/mx6/lowlevel_init.S
> create mode 100644 arch/arm/cpu/armv7/mx6/soc.c
> create mode 100644 arch/arm/include/asm/arch-mx6/ccm_regs.h
> create mode 100644 arch/arm/include/asm/arch-mx6/clock.h
> create mode 100644 arch/arm/include/asm/arch-mx6/gpio.h
> create mode 100644 arch/arm/include/asm/arch-mx6/imx-regs.h
> create mode 100644 arch/arm/include/asm/arch-mx6/iomux-v3.h
> create mode 100644 arch/arm/include/asm/arch-mx6/mx6x_pins.h
> create mode 100644 arch/arm/include/asm/arch-mx6/sys_proto.h
> rename board/denx/m28evk/{mmc_boot.c => spl_boot.c} (87%)
> create mode 100644 board/freescale/mx6qarm2/Makefile
> create mode 100644 board/freescale/mx6qarm2/imximage.cfg
> create mode 100644 board/freescale/mx6qarm2/mx6qarm2.c
> create mode 100644 include/configs/mx6qarm2.h
>
> Best regards,
> Stefano
Applied to u-boot-arm/master, thanks.
Amicalement,
--
Albert.
^ permalink raw reply [flat|nested] 116+ messages in thread
* [U-Boot] [GIT PULL] Pull request: u-boot-imx
@ 2011-12-09 14:34 Stefano Babic
2011-12-09 16:40 ` Albert ARIBAUD
0 siblings, 1 reply; 116+ messages in thread
From: Stefano Babic @ 2011-12-09 14:34 UTC (permalink / raw)
To: u-boot
Hi Albert,
please pull from u-boot-imx. It is rebased on u-boot mainline, because
Wolfgang has already merged your u-boot-arm/master + some fixes.
The following changes since commit d82a27bc5c404da907f71960a3ed2e148ac73fd0:
drivers/net/inca-ip_sw.c: Fix GCC 4.6 build warning (2011-12-08
21:01:19 +0100)
are available in the git repository at:
git://www.denx.de/git/u-boot-imx.git master
Jason Liu (4):
i.mx: introduce the armv7/imx-common folder
i.mx: add the initial support for freescale i.MX6Q processor
i.mx: mxc_gpio: add the i.mx6q support
i.mx: i.mx6q: add the initial support for i.mx6q ARM2 board
Marek Vasut (4):
M28: Document that units has to be set to sectors on SD bootcard
M28: Fix typo
i.MX28: Move SPL to arch/arm/cpu/arm926ejs/mx28
M28: Cleanup memsize.o OOT build
MAINTAINERS | 1 +
Makefile | 8 +
arch/arm/cpu/arm926ejs/mx28/Makefile | 4 +
.../arm/cpu/arm926ejs/mx28/mx28_init.h | 0
arch/arm/cpu/arm926ejs/mx28/spl_boot.c | 78 +
.../arm/cpu/arm926ejs/mx28/spl_mem_init.c | 2 +-
.../arm/cpu/arm926ejs/mx28/spl_power_init.c | 2 +-
.../m28evk => arch/arm/cpu/arm926ejs/mx28}/start.S | 0
.../arm/cpu/arm926ejs/mx28}/u-boot-spl.lds | 14 +-
arch/arm/cpu/armv7/imx-common/Makefile | 47 +
arch/arm/cpu/armv7/imx-common/cpu.c | 108 ++
arch/arm/cpu/armv7/{mx5 => imx-common}/speed.c | 0
arch/arm/cpu/armv7/{mx5 => imx-common}/timer.c | 17 +-
arch/arm/cpu/armv7/mx5/Makefile | 2 +-
arch/arm/cpu/armv7/mx5/soc.c | 77 -
arch/arm/cpu/armv7/mx6/lowlevel_init.S | 24 +
arch/arm/cpu/armv7/mx6/soc.c | 82 +
arch/arm/include/asm/arch-mx28/sys_proto.h | 6 +
arch/arm/include/asm/arch-mx6/ccm_regs.h | 892 +++++++++++
arch/arm/include/asm/arch-mx6/clock.h | 50 +
arch/arm/include/asm/arch-mx6/gpio.h | 35 +
arch/arm/include/asm/arch-mx6/imx-regs.h | 236 +++
arch/arm/include/asm/arch-mx6/iomux-v3.h | 103 ++
arch/arm/include/asm/arch-mx6/mx6x_pins.h | 1683
++++++++++++++++++++
arch/arm/include/asm/arch-mx6/sys_proto.h | 38 +
board/denx/m28evk/Makefile | 11 +-
board/denx/m28evk/m28evk.c | 2 +-
board/denx/m28evk/{mmc_boot.c => spl_boot.c} | 61 +-
board/freescale/mx6qarm2/Makefile | 42 +
board/freescale/mx6qarm2/imximage.cfg | 167 ++
board/freescale/mx6qarm2/mx6qarm2.c | 155 ++
boards.cfg | 1 +
doc/README.m28 | 3 +-
drivers/gpio/mxc_gpio.c | 4 +-
include/configs/m28evk.h | 6 +-
include/configs/mx6qarm2.h | 162 ++
39 files changed, 4441 insertions(+), 167 deletions(-)
rename board/denx/m28evk/m28_init.h =>
arch/arm/cpu/arm926ejs/mx28/mx28_init.h (100%)
create mode 100644 arch/arm/cpu/arm926ejs/mx28/spl_boot.c
rename board/denx/m28evk/mem_init.c =>
arch/arm/cpu/arm926ejs/mx28/spl_mem_init.c (99%)
rename board/denx/m28evk/power_init.c =>
arch/arm/cpu/arm926ejs/mx28/spl_power_init.c (99%)
rename {board/denx/m28evk => arch/arm/cpu/arm926ejs/mx28}/start.S (100%)
rename {board/denx/m28evk =>
arch/arm/cpu/arm926ejs/mx28}/u-boot-spl.lds (93%)
create mode 100644 arch/arm/cpu/armv7/imx-common/Makefile
create mode 100644 arch/arm/cpu/armv7/imx-common/cpu.c
rename arch/arm/cpu/armv7/{mx5 => imx-common}/speed.c (100%)
rename arch/arm/cpu/armv7/{mx5 => imx-common}/timer.c (84%)
mode change 100644 => 100755
create mode 100644 arch/arm/cpu/armv7/mx6/Makefile
create mode 100644 arch/arm/cpu/armv7/mx6/clock.c
create mode 100644 arch/arm/cpu/armv7/mx6/iomux-v3.c
create mode 100644 arch/arm/cpu/armv7/mx6/lowlevel_init.S
create mode 100644 arch/arm/cpu/armv7/mx6/soc.c
create mode 100644 arch/arm/include/asm/arch-mx6/ccm_regs.h
create mode 100644 arch/arm/include/asm/arch-mx6/clock.h
create mode 100644 arch/arm/include/asm/arch-mx6/gpio.h
create mode 100644 arch/arm/include/asm/arch-mx6/imx-regs.h
create mode 100644 arch/arm/include/asm/arch-mx6/iomux-v3.h
create mode 100644 arch/arm/include/asm/arch-mx6/mx6x_pins.h
create mode 100644 arch/arm/include/asm/arch-mx6/sys_proto.h
rename board/denx/m28evk/{mmc_boot.c => spl_boot.c} (87%)
create mode 100644 board/freescale/mx6qarm2/Makefile
create mode 100644 board/freescale/mx6qarm2/imximage.cfg
create mode 100644 board/freescale/mx6qarm2/mx6qarm2.c
create mode 100644 include/configs/mx6qarm2.h
Best regards,
Stefano
--
=====================================================================
DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: +49-8142-66989-0 Fax: +49-8142-66989-80 Email: office at denx.de
=====================================================================
^ permalink raw reply [flat|nested] 116+ messages in thread
* [U-Boot] [GIT PULL] Pull request: u-boot-imx
2011-12-05 17:22 Stefano Babic
@ 2011-12-05 17:27 ` Albert ARIBAUD
0 siblings, 0 replies; 116+ messages in thread
From: Albert ARIBAUD @ 2011-12-05 17:27 UTC (permalink / raw)
To: u-boot
Hi Stefano,
Le 05/12/2011 18:22, Stefano Babic a ?crit :
> Hi Albert,
>
> please pull from u-boot-imx (this time rebased on u-boot-arm/master..)
>
> The following changes since commit d4870a914b73884f2f3e8fb082ae50f75fc01ebc:
>
> arm, arm926ejs: Fix clear bss loop for zero length bss (2011-12-05
> 18:03:51 +0100)
>
> are available in the git repository at:
> git://www.denx.de/git/u-boot-imx.git master
>
> Fabio Estevam (5):
> mx53loco: Configure the pins as GPIOs prior to using gpio_get_value
> mx53ard: Configure the pins as GPIOs prior to using gpio_get_value
> mx53evk: Configure the pins as GPIOs prior to using gpio_get_value
> mx53smd: Configure the pins as GPIOs prior to using gpio_get_value
> mx51evk: Configure the pins as GPIOs prior to using gpio_get_value
>
> Marek Vasut (3):
> MC13892: Add REGMODE0 bits definitions
> Efika: Configure additional regulators for HDMI output
> MXS: Add static annotations to dma driver
>
> Robert Deli?n (1):
> M28: Fix OB1 bug in GPIO driver
>
> Simon Glass (1):
> mx5: Correct a warning in clock.c
>
> Stefano Babic (2):
> MX: serial_mxc: cleanup removing nasty #ifdef
> MX35: flea3: changes due to hardware revision B
>
> Wolfram Sang (1):
> apbh_dma: return error value on timeout
Applied tu u-boot-arm/master, thanks!
Amicalement,
--
Albert.
^ permalink raw reply [flat|nested] 116+ messages in thread
* [U-Boot] [GIT PULL] Pull request: u-boot-imx
@ 2011-12-05 17:22 Stefano Babic
2011-12-05 17:27 ` Albert ARIBAUD
0 siblings, 1 reply; 116+ messages in thread
From: Stefano Babic @ 2011-12-05 17:22 UTC (permalink / raw)
To: u-boot
Hi Albert,
please pull from u-boot-imx (this time rebased on u-boot-arm/master..)
The following changes since commit d4870a914b73884f2f3e8fb082ae50f75fc01ebc:
arm, arm926ejs: Fix clear bss loop for zero length bss (2011-12-05
18:03:51 +0100)
are available in the git repository at:
git://www.denx.de/git/u-boot-imx.git master
Fabio Estevam (5):
mx53loco: Configure the pins as GPIOs prior to using gpio_get_value
mx53ard: Configure the pins as GPIOs prior to using gpio_get_value
mx53evk: Configure the pins as GPIOs prior to using gpio_get_value
mx53smd: Configure the pins as GPIOs prior to using gpio_get_value
mx51evk: Configure the pins as GPIOs prior to using gpio_get_value
Marek Vasut (3):
MC13892: Add REGMODE0 bits definitions
Efika: Configure additional regulators for HDMI output
MXS: Add static annotations to dma driver
Robert Deli?n (1):
M28: Fix OB1 bug in GPIO driver
Simon Glass (1):
mx5: Correct a warning in clock.c
Stefano Babic (2):
MX: serial_mxc: cleanup removing nasty #ifdef
MX35: flea3: changes due to hardware revision B
Wolfram Sang (1):
apbh_dma: return error value on timeout
arch/arm/cpu/arm1136/mx31/devices.c | 4 -
arch/arm/cpu/armv7/mx5/clock.c | 2 +-
arch/arm/include/asm/arch-mx25/imx-regs.h | 10 +-
arch/arm/include/asm/arch-mx27/imx-regs.h | 8 +-
arch/arm/include/asm/arch-mx28/dma.h | 25 ----
arch/arm/include/asm/arch-mx31/imx-regs.h | 6 +
arch/arm/include/asm/arch-mx35/imx-regs.h | 6 +-
arch/arm/include/asm/arch-mx5/imx-regs.h | 6 +-
board/CarMediaLab/flea3/flea3.c | 4 +-
board/efikamx/efikamx.c | 15 ++-
board/freescale/mx51evk/mx51evk.c | 3 +
board/freescale/mx53ard/mx53ard.c | 3 +
board/freescale/mx53evk/mx53evk.c | 3 +
board/freescale/mx53loco/mx53loco.c | 3 +
board/freescale/mx53smd/mx53smd.c | 1 +
drivers/dma/apbh_dma.c | 211
+++++++----------------------
drivers/gpio/mxs_gpio.c | 2 +-
drivers/serial/serial_mxc.c | 37 +-----
include/configs/efikamx.h | 2 +-
include/configs/flea3.h | 22 ++--
include/configs/imx27lite-common.h | 2 +-
include/configs/imx31_litekit.h | 4 +-
include/configs/imx31_phycore.h | 2 +-
include/configs/mx25pdk.h | 2 +-
include/configs/mx31ads.h | 4 +-
include/configs/mx31pdk.h | 2 +-
include/configs/mx35pdk.h | 2 +-
include/configs/mx51evk.h | 2 +-
include/configs/mx53ard.h | 2 +-
include/configs/mx53evk.h | 2 +-
include/configs/mx53loco.h | 2 +-
include/configs/mx53smd.h | 2 +-
include/configs/qong.h | 4 +-
include/configs/tt01.h | 2 +-
include/configs/tx25.h | 2 +-
include/configs/vision2.h | 2 +-
include/configs/zmx25.h | 2 +-
include/mc13892.h | 16 +++
38 files changed, 153 insertions(+), 276 deletions(-)
--
=====================================================================
DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: +49-8142-66989-0 Fax: +49-8142-66989-80 Email: office at denx.de
=====================================================================
^ permalink raw reply [flat|nested] 116+ messages in thread
* [U-Boot] [GIT PULL] Pull request: u-boot-imx
2011-12-05 16:57 ` Albert ARIBAUD
@ 2011-12-05 17:19 ` Stefano Babic
0 siblings, 0 replies; 116+ messages in thread
From: Stefano Babic @ 2011-12-05 17:19 UTC (permalink / raw)
To: u-boot
On 05/12/2011 17:57, Albert ARIBAUD wrote:
>
> Hmm... Your master is based on my next, not on my master. Do you intend
> me to add these onto my 'next' or 'master' branch?
Sorry, I have applied the wrong script, I presume.
I will send a new pull request soon.
Best regards,
Stefano Babic
--
=====================================================================
DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: +49-8142-66989-0 Fax: +49-8142-66989-80 Email: office at denx.de
=====================================================================
^ permalink raw reply [flat|nested] 116+ messages in thread
* [U-Boot] [GIT PULL] Pull request: u-boot-imx
2011-12-01 16:14 Stefano Babic
@ 2011-12-05 16:57 ` Albert ARIBAUD
2011-12-05 17:19 ` Stefano Babic
0 siblings, 1 reply; 116+ messages in thread
From: Albert ARIBAUD @ 2011-12-05 16:57 UTC (permalink / raw)
To: u-boot
Hi Stefano,
Le 01/12/2011 17:14, Stefano Babic a ?crit :
> Hi Albert,
>
> please pull from u-boot-imx, thanks.
>
> The following changes since commit 3be4bab07b614c23f3bffaa6febca9a5a2c4dfa6:
>
> vision2: Fix checkpatch warning (2011-11-28 13:10:36 +0100)
>
> are available in the git repository at:
> git://www.denx.de/git/u-boot-imx.git master
>
> Fabio Estevam (5):
> mx53loco: Configure the pins as GPIOs prior to using gpio_get_value
> mx53ard: Configure the pins as GPIOs prior to using gpio_get_value
> mx53evk: Configure the pins as GPIOs prior to using gpio_get_value
> mx53smd: Configure the pins as GPIOs prior to using gpio_get_value
> mx51evk: Configure the pins as GPIOs prior to using gpio_get_value
>
> Marek Vasut (3):
> MC13892: Add REGMODE0 bits definitions
> Efika: Configure additional regulators for HDMI output
> MXS: Add static annotations to dma driver
>
> Robert Deli?n (1):
> M28: Fix OB1 bug in GPIO driver
>
> Simon Glass (1):
> mx5: Correct a warning in clock.c
>
> Stefano Babic (2):
> MX: serial_mxc: cleanup removing nasty #ifdef
> MX35: flea3: changes due to hardware revision B
>
> Wolfram Sang (1):
> apbh_dma: return error value on timeout
Hmm... Your master is based on my next, not on my master. Do you intend
me to add these onto my 'next' or 'master' branch?
Amicalement,
--
Albert.
^ permalink raw reply [flat|nested] 116+ messages in thread
* [U-Boot] [GIT PULL] Pull request: u-boot-imx
@ 2011-12-01 16:14 Stefano Babic
2011-12-05 16:57 ` Albert ARIBAUD
0 siblings, 1 reply; 116+ messages in thread
From: Stefano Babic @ 2011-12-01 16:14 UTC (permalink / raw)
To: u-boot
Hi Albert,
please pull from u-boot-imx, thanks.
The following changes since commit 3be4bab07b614c23f3bffaa6febca9a5a2c4dfa6:
vision2: Fix checkpatch warning (2011-11-28 13:10:36 +0100)
are available in the git repository at:
git://www.denx.de/git/u-boot-imx.git master
Fabio Estevam (5):
mx53loco: Configure the pins as GPIOs prior to using gpio_get_value
mx53ard: Configure the pins as GPIOs prior to using gpio_get_value
mx53evk: Configure the pins as GPIOs prior to using gpio_get_value
mx53smd: Configure the pins as GPIOs prior to using gpio_get_value
mx51evk: Configure the pins as GPIOs prior to using gpio_get_value
Marek Vasut (3):
MC13892: Add REGMODE0 bits definitions
Efika: Configure additional regulators for HDMI output
MXS: Add static annotations to dma driver
Robert Deli?n (1):
M28: Fix OB1 bug in GPIO driver
Simon Glass (1):
mx5: Correct a warning in clock.c
Stefano Babic (2):
MX: serial_mxc: cleanup removing nasty #ifdef
MX35: flea3: changes due to hardware revision B
Wolfram Sang (1):
apbh_dma: return error value on timeout
arch/arm/cpu/arm1136/mx31/devices.c | 4 -
arch/arm/cpu/armv7/mx5/clock.c | 2 +-
arch/arm/include/asm/arch-mx25/imx-regs.h | 10 +-
arch/arm/include/asm/arch-mx27/imx-regs.h | 8 +-
arch/arm/include/asm/arch-mx28/dma.h | 25 ----
arch/arm/include/asm/arch-mx31/imx-regs.h | 6 +
arch/arm/include/asm/arch-mx35/imx-regs.h | 6 +-
arch/arm/include/asm/arch-mx5/imx-regs.h | 6 +-
board/CarMediaLab/flea3/flea3.c | 4 +-
board/efikamx/efikamx.c | 15 ++-
board/freescale/mx51evk/mx51evk.c | 3 +
board/freescale/mx53ard/mx53ard.c | 3 +
board/freescale/mx53evk/mx53evk.c | 3 +
board/freescale/mx53loco/mx53loco.c | 3 +
board/freescale/mx53smd/mx53smd.c | 1 +
drivers/dma/apbh_dma.c | 211
+++++++----------------------
drivers/gpio/mxs_gpio.c | 2 +-
drivers/serial/serial_mxc.c | 37 +-----
include/configs/efikamx.h | 2 +-
include/configs/flea3.h | 22 ++--
include/configs/imx27lite-common.h | 2 +-
include/configs/imx31_litekit.h | 4 +-
include/configs/imx31_phycore.h | 2 +-
include/configs/mx25pdk.h | 2 +-
include/configs/mx31ads.h | 4 +-
include/configs/mx31pdk.h | 2 +-
include/configs/mx35pdk.h | 2 +-
include/configs/mx51evk.h | 2 +-
include/configs/mx53ard.h | 2 +-
include/configs/mx53evk.h | 2 +-
include/configs/mx53loco.h | 2 +-
include/configs/mx53smd.h | 2 +-
include/configs/qong.h | 4 +-
include/configs/tt01.h | 2 +-
include/configs/tx25.h | 2 +-
include/configs/vision2.h | 2 +-
include/configs/zmx25.h | 2 +-
include/mc13892.h | 16 +++
38 files changed, 153 insertions(+), 276 deletions(-)
--
=====================================================================
DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: +49-8142-66989-0 Fax: +49-8142-66989-80 Email: office at denx.de
=====================================================================
^ permalink raw reply [flat|nested] 116+ messages in thread
* [U-Boot] [GIT PULL] Pull request: u-boot-imx
2011-11-11 10:40 Stefano Babic
@ 2011-11-15 21:24 ` Albert ARIBAUD
0 siblings, 0 replies; 116+ messages in thread
From: Albert ARIBAUD @ 2011-11-15 21:24 UTC (permalink / raw)
To: u-boot
Hi Stefano,
Le 11/11/2011 11:40, Stefano Babic a ?crit :
> Hi Albert,
>
> please pull from u-boot-imx.
>
> The following changes since commit 06194b6b65f701a9d6ef2d9b4123c4afe57d8783:
>
> da850: add new config file for AM18xx (2011-11-10 16:30:41 +0100)
>
> are available in the git repository at:
> git://www.denx.de/git/u-boot-imx.git master
>
> Fabio Estevam (5):
> qong: Use generic function for configuring GPR register
> mx31: Remove duplicate definition for GPR register
> mx31: Use proper IO accessor for GPR register
> mx31: Fix checkpatch warnings in generic.c
> m28evk: Fix comment about the number of RAM banks
>
> Marek Vasut (20):
> iMX28: Initial support for iMX28 CPU
> iMX28: Add SSP MMC driver
> FEC: Add support for iMX28 quirks
> iMX28: Add PINMUX control
> iMX28: Add I2C bus driver
> iMX28: Add GPIO control
> iMX28: Add SPI driver
> iMX28: Add APBH DMA driver
> iMX28: Add GPMI NAND driver
> iMX28: Add driver for internal RTC
> iMX28: Add image header generator tool
> iMX28: Add u-boot.sb target to Makefile
> iMX28: Add support for DENX M28EVK board
> M28: Add MMC SPL
> M28: Add doc/README.m28 documentation
> iMX28: Fix ARM vector handling
> M28: Add memory detection into SPL
> iMX28: Add USB and USB PHY register definitions
> iMX28: Add USB HOST driver
> M28EVK: Enable USB HOST support
>
> Stefano Babic (1):
> MX25: zmx25: GCC4.6 fix build warnings
>
> .gitignore | 1 +
> MAINTAINERS | 1 +
> Makefile | 5 +
> arch/arm/cpu/arm1136/mx31/generic.c | 11 +-
> arch/arm/cpu/arm926ejs/mx28/Makefile | 46 +
> arch/arm/cpu/arm926ejs/mx28/clock.c | 355 +++++++
> arch/arm/cpu/arm926ejs/mx28/iomux.c | 109 +++
> arch/arm/cpu/arm926ejs/mx28/mx28.c | 221 +++++
> arch/arm/cpu/arm926ejs/mx28/timer.c | 141 +++
> arch/arm/include/asm/arch-mx28/clock.h | 61 ++
> arch/arm/include/asm/arch-mx28/dma.h | 170 ++++
> arch/arm/include/asm/arch-mx28/gpio.h | 32 +
> arch/arm/include/asm/arch-mx28/imx-regs.h | 39 +
> arch/arm/include/asm/arch-mx28/iomux-mx28.h | 537 +++++++++++
> arch/arm/include/asm/arch-mx28/iomux.h | 168 ++++
> arch/arm/include/asm/arch-mx28/regs-apbh.h | 466 +++++++++
> arch/arm/include/asm/arch-mx28/regs-base.h | 88 ++
> arch/arm/include/asm/arch-mx28/regs-bch.h | 230 +++++
> arch/arm/include/asm/arch-mx28/regs-clkctrl.h | 312 ++++++
> arch/arm/include/asm/arch-mx28/regs-common.h | 66 ++
> arch/arm/include/asm/arch-mx28/regs-gpmi.h | 222 +++++
> arch/arm/include/asm/arch-mx28/regs-i2c.h | 207 ++++
> arch/arm/include/asm/arch-mx28/regs-ocotp.h | 173 ++++
> arch/arm/include/asm/arch-mx28/regs-pinctrl.h | 1284
> +++++++++++++++++++++++++
> arch/arm/include/asm/arch-mx28/regs-power.h | 413 ++++++++
> arch/arm/include/asm/arch-mx28/regs-rtc.h | 147 +++
> arch/arm/include/asm/arch-mx28/regs-ssp.h | 349 +++++++
> arch/arm/include/asm/arch-mx28/regs-timrot.h | 171 ++++
> arch/arm/include/asm/arch-mx28/regs-usb.h | 178 ++++
> arch/arm/include/asm/arch-mx28/regs-usbphy.h | 151 +++
> arch/arm/include/asm/arch-mx28/sys_proto.h | 32 +
> arch/arm/include/asm/arch-mx31/imx-regs.h | 7 +-
> board/davedenx/qong/qong.c | 2 +-
> board/denx/m28evk/Makefile | 56 ++
> board/denx/m28evk/m28_init.h | 41 +
> board/denx/m28evk/m28evk.c | 216 +++++
> board/denx/m28evk/mem_init.c | 240 +++++
> board/denx/m28evk/mmc_boot.c | 273 ++++++
> board/denx/m28evk/power_init.c | 913 ++++++++++++++++++
> board/denx/m28evk/start.S | 234 +++++
> board/denx/m28evk/u-boot-spl.lds | 87 ++
> board/denx/m28evk/u-boot.bd | 14 +
> board/syteco/zmx25/zmx25.c | 2 -
> boards.cfg | 1 +
> doc/README.m28 | 223 +++++
> drivers/dma/Makefile | 1 +
> drivers/dma/apbh_dma.c | 691 +++++++++++++
> drivers/gpio/Makefile | 1 +
> drivers/gpio/mxs_gpio.c | 136 +++
> drivers/i2c/Makefile | 1 +
> drivers/i2c/mxs_i2c.c | 246 +++++
> drivers/mmc/Makefile | 1 +
> drivers/mmc/mxsmmc.c | 351 +++++++
> drivers/mtd/nand/Makefile | 1 +
> drivers/mtd/nand/mxs_nand.c | 1118 +++++++++++++++++++++
> drivers/net/fec_mxc.c | 44 +-
> drivers/rtc/Makefile | 1 +
> drivers/rtc/mxsrtc.c | 86 ++
> drivers/spi/Makefile | 1 +
> drivers/spi/mxs_spi.c | 186 ++++
> drivers/usb/host/Makefile | 1 +
> drivers/usb/host/ehci-mxs.c | 154 +++
> include/configs/m28evk.h | 303 ++++++
> tools/.gitignore | 1 +
> tools/Makefile | 6 +
> tools/mxsboot.c | 684 +++++++++++++
> 66 files changed, 12697 insertions(+), 12 deletions(-)
> create mode 100644 arch/arm/cpu/arm926ejs/mx28/Makefile
> create mode 100644 arch/arm/cpu/arm926ejs/mx28/clock.c
> create mode 100644 arch/arm/cpu/arm926ejs/mx28/iomux.c
> create mode 100644 arch/arm/cpu/arm926ejs/mx28/mx28.c
> create mode 100644 arch/arm/cpu/arm926ejs/mx28/timer.c
> create mode 100644 arch/arm/include/asm/arch-mx28/clock.h
> create mode 100644 arch/arm/include/asm/arch-mx28/dma.h
> create mode 100644 arch/arm/include/asm/arch-mx28/gpio.h
> create mode 100644 arch/arm/include/asm/arch-mx28/imx-regs.h
> create mode 100644 arch/arm/include/asm/arch-mx28/iomux-mx28.h
> create mode 100644 arch/arm/include/asm/arch-mx28/iomux.h
> create mode 100644 arch/arm/include/asm/arch-mx28/regs-apbh.h
> create mode 100644 arch/arm/include/asm/arch-mx28/regs-base.h
> create mode 100644 arch/arm/include/asm/arch-mx28/regs-bch.h
> create mode 100644 arch/arm/include/asm/arch-mx28/regs-clkctrl.h
> create mode 100644 arch/arm/include/asm/arch-mx28/regs-common.h
> create mode 100644 arch/arm/include/asm/arch-mx28/regs-gpmi.h
> create mode 100644 arch/arm/include/asm/arch-mx28/regs-i2c.h
> create mode 100644 arch/arm/include/asm/arch-mx28/regs-ocotp.h
> create mode 100644 arch/arm/include/asm/arch-mx28/regs-pinctrl.h
> create mode 100644 arch/arm/include/asm/arch-mx28/regs-power.h
> create mode 100644 arch/arm/include/asm/arch-mx28/regs-rtc.h
> create mode 100644 arch/arm/include/asm/arch-mx28/regs-ssp.h
> create mode 100644 arch/arm/include/asm/arch-mx28/regs-timrot.h
> create mode 100644 arch/arm/include/asm/arch-mx28/regs-usb.h
> create mode 100644 arch/arm/include/asm/arch-mx28/regs-usbphy.h
> create mode 100644 arch/arm/include/asm/arch-mx28/sys_proto.h
> create mode 100644 board/denx/m28evk/Makefile
> create mode 100644 board/denx/m28evk/m28_init.h
> create mode 100644 board/denx/m28evk/m28evk.c
> create mode 100644 board/denx/m28evk/mem_init.c
> create mode 100644 board/denx/m28evk/mmc_boot.c
> create mode 100644 board/denx/m28evk/power_init.c
> create mode 100644 board/denx/m28evk/start.S
> create mode 100644 board/denx/m28evk/u-boot-spl.lds
> create mode 100644 board/denx/m28evk/u-boot.bd
> create mode 100644 doc/README.m28
> create mode 100644 drivers/dma/apbh_dma.c
> create mode 100644 drivers/gpio/mxs_gpio.c
> create mode 100644 drivers/i2c/mxs_i2c.c
> create mode 100644 drivers/mmc/mxsmmc.c
> create mode 100644 drivers/mtd/nand/mxs_nand.c
> create mode 100644 drivers/rtc/mxsrtc.c
> create mode 100644 drivers/spi/mxs_spi.c
> create mode 100644 drivers/usb/host/ehci-mxs.c
> create mode 100644 include/configs/m28evk.h
> create mode 100644 tools/mxsboot.c
Applied to u-boot-arm/master, thanks.
Amicalement,
--
Albert.
^ permalink raw reply [flat|nested] 116+ messages in thread
* [U-Boot] [GIT PULL] Pull request: u-boot-imx
@ 2011-11-11 10:40 Stefano Babic
2011-11-15 21:24 ` Albert ARIBAUD
0 siblings, 1 reply; 116+ messages in thread
From: Stefano Babic @ 2011-11-11 10:40 UTC (permalink / raw)
To: u-boot
Hi Albert,
please pull from u-boot-imx.
The following changes since commit 06194b6b65f701a9d6ef2d9b4123c4afe57d8783:
da850: add new config file for AM18xx (2011-11-10 16:30:41 +0100)
are available in the git repository at:
git://www.denx.de/git/u-boot-imx.git master
Fabio Estevam (5):
qong: Use generic function for configuring GPR register
mx31: Remove duplicate definition for GPR register
mx31: Use proper IO accessor for GPR register
mx31: Fix checkpatch warnings in generic.c
m28evk: Fix comment about the number of RAM banks
Marek Vasut (20):
iMX28: Initial support for iMX28 CPU
iMX28: Add SSP MMC driver
FEC: Add support for iMX28 quirks
iMX28: Add PINMUX control
iMX28: Add I2C bus driver
iMX28: Add GPIO control
iMX28: Add SPI driver
iMX28: Add APBH DMA driver
iMX28: Add GPMI NAND driver
iMX28: Add driver for internal RTC
iMX28: Add image header generator tool
iMX28: Add u-boot.sb target to Makefile
iMX28: Add support for DENX M28EVK board
M28: Add MMC SPL
M28: Add doc/README.m28 documentation
iMX28: Fix ARM vector handling
M28: Add memory detection into SPL
iMX28: Add USB and USB PHY register definitions
iMX28: Add USB HOST driver
M28EVK: Enable USB HOST support
Stefano Babic (1):
MX25: zmx25: GCC4.6 fix build warnings
.gitignore | 1 +
MAINTAINERS | 1 +
Makefile | 5 +
arch/arm/cpu/arm1136/mx31/generic.c | 11 +-
arch/arm/cpu/arm926ejs/mx28/Makefile | 46 +
arch/arm/cpu/arm926ejs/mx28/clock.c | 355 +++++++
arch/arm/cpu/arm926ejs/mx28/iomux.c | 109 +++
arch/arm/cpu/arm926ejs/mx28/mx28.c | 221 +++++
arch/arm/cpu/arm926ejs/mx28/timer.c | 141 +++
arch/arm/include/asm/arch-mx28/clock.h | 61 ++
arch/arm/include/asm/arch-mx28/dma.h | 170 ++++
arch/arm/include/asm/arch-mx28/gpio.h | 32 +
arch/arm/include/asm/arch-mx28/imx-regs.h | 39 +
arch/arm/include/asm/arch-mx28/iomux-mx28.h | 537 +++++++++++
arch/arm/include/asm/arch-mx28/iomux.h | 168 ++++
arch/arm/include/asm/arch-mx28/regs-apbh.h | 466 +++++++++
arch/arm/include/asm/arch-mx28/regs-base.h | 88 ++
arch/arm/include/asm/arch-mx28/regs-bch.h | 230 +++++
arch/arm/include/asm/arch-mx28/regs-clkctrl.h | 312 ++++++
arch/arm/include/asm/arch-mx28/regs-common.h | 66 ++
arch/arm/include/asm/arch-mx28/regs-gpmi.h | 222 +++++
arch/arm/include/asm/arch-mx28/regs-i2c.h | 207 ++++
arch/arm/include/asm/arch-mx28/regs-ocotp.h | 173 ++++
arch/arm/include/asm/arch-mx28/regs-pinctrl.h | 1284
+++++++++++++++++++++++++
arch/arm/include/asm/arch-mx28/regs-power.h | 413 ++++++++
arch/arm/include/asm/arch-mx28/regs-rtc.h | 147 +++
arch/arm/include/asm/arch-mx28/regs-ssp.h | 349 +++++++
arch/arm/include/asm/arch-mx28/regs-timrot.h | 171 ++++
arch/arm/include/asm/arch-mx28/regs-usb.h | 178 ++++
arch/arm/include/asm/arch-mx28/regs-usbphy.h | 151 +++
arch/arm/include/asm/arch-mx28/sys_proto.h | 32 +
arch/arm/include/asm/arch-mx31/imx-regs.h | 7 +-
board/davedenx/qong/qong.c | 2 +-
board/denx/m28evk/Makefile | 56 ++
board/denx/m28evk/m28_init.h | 41 +
board/denx/m28evk/m28evk.c | 216 +++++
board/denx/m28evk/mem_init.c | 240 +++++
board/denx/m28evk/mmc_boot.c | 273 ++++++
board/denx/m28evk/power_init.c | 913 ++++++++++++++++++
board/denx/m28evk/start.S | 234 +++++
board/denx/m28evk/u-boot-spl.lds | 87 ++
board/denx/m28evk/u-boot.bd | 14 +
board/syteco/zmx25/zmx25.c | 2 -
boards.cfg | 1 +
doc/README.m28 | 223 +++++
drivers/dma/Makefile | 1 +
drivers/dma/apbh_dma.c | 691 +++++++++++++
drivers/gpio/Makefile | 1 +
drivers/gpio/mxs_gpio.c | 136 +++
drivers/i2c/Makefile | 1 +
drivers/i2c/mxs_i2c.c | 246 +++++
drivers/mmc/Makefile | 1 +
drivers/mmc/mxsmmc.c | 351 +++++++
drivers/mtd/nand/Makefile | 1 +
drivers/mtd/nand/mxs_nand.c | 1118 +++++++++++++++++++++
drivers/net/fec_mxc.c | 44 +-
drivers/rtc/Makefile | 1 +
drivers/rtc/mxsrtc.c | 86 ++
drivers/spi/Makefile | 1 +
drivers/spi/mxs_spi.c | 186 ++++
drivers/usb/host/Makefile | 1 +
drivers/usb/host/ehci-mxs.c | 154 +++
include/configs/m28evk.h | 303 ++++++
tools/.gitignore | 1 +
tools/Makefile | 6 +
tools/mxsboot.c | 684 +++++++++++++
66 files changed, 12697 insertions(+), 12 deletions(-)
create mode 100644 arch/arm/cpu/arm926ejs/mx28/Makefile
create mode 100644 arch/arm/cpu/arm926ejs/mx28/clock.c
create mode 100644 arch/arm/cpu/arm926ejs/mx28/iomux.c
create mode 100644 arch/arm/cpu/arm926ejs/mx28/mx28.c
create mode 100644 arch/arm/cpu/arm926ejs/mx28/timer.c
create mode 100644 arch/arm/include/asm/arch-mx28/clock.h
create mode 100644 arch/arm/include/asm/arch-mx28/dma.h
create mode 100644 arch/arm/include/asm/arch-mx28/gpio.h
create mode 100644 arch/arm/include/asm/arch-mx28/imx-regs.h
create mode 100644 arch/arm/include/asm/arch-mx28/iomux-mx28.h
create mode 100644 arch/arm/include/asm/arch-mx28/iomux.h
create mode 100644 arch/arm/include/asm/arch-mx28/regs-apbh.h
create mode 100644 arch/arm/include/asm/arch-mx28/regs-base.h
create mode 100644 arch/arm/include/asm/arch-mx28/regs-bch.h
create mode 100644 arch/arm/include/asm/arch-mx28/regs-clkctrl.h
create mode 100644 arch/arm/include/asm/arch-mx28/regs-common.h
create mode 100644 arch/arm/include/asm/arch-mx28/regs-gpmi.h
create mode 100644 arch/arm/include/asm/arch-mx28/regs-i2c.h
create mode 100644 arch/arm/include/asm/arch-mx28/regs-ocotp.h
create mode 100644 arch/arm/include/asm/arch-mx28/regs-pinctrl.h
create mode 100644 arch/arm/include/asm/arch-mx28/regs-power.h
create mode 100644 arch/arm/include/asm/arch-mx28/regs-rtc.h
create mode 100644 arch/arm/include/asm/arch-mx28/regs-ssp.h
create mode 100644 arch/arm/include/asm/arch-mx28/regs-timrot.h
create mode 100644 arch/arm/include/asm/arch-mx28/regs-usb.h
create mode 100644 arch/arm/include/asm/arch-mx28/regs-usbphy.h
create mode 100644 arch/arm/include/asm/arch-mx28/sys_proto.h
create mode 100644 board/denx/m28evk/Makefile
create mode 100644 board/denx/m28evk/m28_init.h
create mode 100644 board/denx/m28evk/m28evk.c
create mode 100644 board/denx/m28evk/mem_init.c
create mode 100644 board/denx/m28evk/mmc_boot.c
create mode 100644 board/denx/m28evk/power_init.c
create mode 100644 board/denx/m28evk/start.S
create mode 100644 board/denx/m28evk/u-boot-spl.lds
create mode 100644 board/denx/m28evk/u-boot.bd
create mode 100644 doc/README.m28
create mode 100644 drivers/dma/apbh_dma.c
create mode 100644 drivers/gpio/mxs_gpio.c
create mode 100644 drivers/i2c/mxs_i2c.c
create mode 100644 drivers/mmc/mxsmmc.c
create mode 100644 drivers/mtd/nand/mxs_nand.c
create mode 100644 drivers/rtc/mxsrtc.c
create mode 100644 drivers/spi/mxs_spi.c
create mode 100644 drivers/usb/host/ehci-mxs.c
create mode 100644 include/configs/m28evk.h
create mode 100644 tools/mxsboot.c
--
=====================================================================
DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: +49-8142-66989-0 Fax: +49-8142-66989-80 Email: office at denx.de
=====================================================================
^ permalink raw reply [flat|nested] 116+ messages in thread
* [U-Boot] [GIT PULL] Pull request: u-boot-imx
2011-11-04 6:47 Stefano Babic
@ 2011-11-04 21:11 ` Albert ARIBAUD
0 siblings, 0 replies; 116+ messages in thread
From: Albert ARIBAUD @ 2011-11-04 21:11 UTC (permalink / raw)
To: u-boot
Hi Stefano,
Le 04/11/2011 07:47, Stefano Babic a ?crit :
> Hi Albert,
>
> please pull from u-boot-imx.
>
> The following changes since commit 92e86c8daed649a9e9ddd6c0b52d61cb25b62c3a:
>
> Davinci: ea20: added PREBOOT to configuration (2011-11-03 22:56:26 +0100)
>
> are available in the git repository at:
> git://www.denx.de/git/u-boot-imx.git master
>
> Anatolij Gustschin (1):
> imx: imx31_phycore.h: fix checkpatch warnings
>
> Fabio Estevam (10):
> mx53evk: Remove unneeded '1' from mx53evk.h
> mx53loco: Remove unused get_board_rev function
> mx53evk: Add RTC support
> mx53evk: Remove unused get_board_rev function
> mx53ard: Remove unused get_board_rev function
> mx53smd: Remove unused get_board_rev function
> vision2: Remove unused get_board_rev function
> mx53: Turn off child clocks before reconfigure perclk_root
> README: Fix supported i.MX SoC list for CONFIG_MXC_SPI
> mx31pdk: Enable D and I caches
>
> Wolfgang Denk (1):
> qong: enable support for compressed images
>
> Wolfgang Grandegger (1):
> ehci-mxc: remove incorrect comment
>
> README | 2 +-
> arch/arm/cpu/armv7/mx5/lowlevel_init.S | 15 +++
> board/freescale/mx31pdk/mx31pdk.c | 8 ++
> board/freescale/mx53ard/mx53ard.c | 5 -
> board/freescale/mx53evk/mx53evk.c | 5 -
> board/freescale/mx53loco/mx53loco.c | 5 -
> board/freescale/mx53smd/mx53smd.c | 5 -
> board/ttcontrol/vision2/vision2.c | 9 --
> drivers/usb/host/ehci-mxc.c | 1 -
> include/configs/imx31_phycore.h | 153
> +++++++++++++++++--------------
> include/configs/mx53ard.h | 1 -
> include/configs/mx53evk.h | 17 ++--
> include/configs/mx53loco.h | 1 -
> include/configs/mx53smd.h | 1 -
> include/configs/qong.h | 5 +-
> include/configs/vision2.h | 1 -
> 16 files changed, 121 insertions(+), 113 deletions(-)
Applied to u-boot-arm/master (once rebased, as I had applied u-boot-ti
first), thanks!
> Best regards,
> Stefano Babic
Amicalement,
--
Albert.
^ permalink raw reply [flat|nested] 116+ messages in thread
* [U-Boot] [GIT PULL] Pull request: u-boot-imx
@ 2011-11-04 6:47 Stefano Babic
2011-11-04 21:11 ` Albert ARIBAUD
0 siblings, 1 reply; 116+ messages in thread
From: Stefano Babic @ 2011-11-04 6:47 UTC (permalink / raw)
To: u-boot
Hi Albert,
please pull from u-boot-imx.
The following changes since commit 92e86c8daed649a9e9ddd6c0b52d61cb25b62c3a:
Davinci: ea20: added PREBOOT to configuration (2011-11-03 22:56:26 +0100)
are available in the git repository at:
git://www.denx.de/git/u-boot-imx.git master
Anatolij Gustschin (1):
imx: imx31_phycore.h: fix checkpatch warnings
Fabio Estevam (10):
mx53evk: Remove unneeded '1' from mx53evk.h
mx53loco: Remove unused get_board_rev function
mx53evk: Add RTC support
mx53evk: Remove unused get_board_rev function
mx53ard: Remove unused get_board_rev function
mx53smd: Remove unused get_board_rev function
vision2: Remove unused get_board_rev function
mx53: Turn off child clocks before reconfigure perclk_root
README: Fix supported i.MX SoC list for CONFIG_MXC_SPI
mx31pdk: Enable D and I caches
Wolfgang Denk (1):
qong: enable support for compressed images
Wolfgang Grandegger (1):
ehci-mxc: remove incorrect comment
README | 2 +-
arch/arm/cpu/armv7/mx5/lowlevel_init.S | 15 +++
board/freescale/mx31pdk/mx31pdk.c | 8 ++
board/freescale/mx53ard/mx53ard.c | 5 -
board/freescale/mx53evk/mx53evk.c | 5 -
board/freescale/mx53loco/mx53loco.c | 5 -
board/freescale/mx53smd/mx53smd.c | 5 -
board/ttcontrol/vision2/vision2.c | 9 --
drivers/usb/host/ehci-mxc.c | 1 -
include/configs/imx31_phycore.h | 153
+++++++++++++++++--------------
include/configs/mx53ard.h | 1 -
include/configs/mx53evk.h | 17 ++--
include/configs/mx53loco.h | 1 -
include/configs/mx53smd.h | 1 -
include/configs/qong.h | 5 +-
include/configs/vision2.h | 1 -
16 files changed, 121 insertions(+), 113 deletions(-)
Best regards,
Stefano Babic
--
=====================================================================
DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: +49-8142-66989-0 Fax: +49-8142-66989-80 Email: office at denx.de
=====================================================================
^ permalink raw reply [flat|nested] 116+ messages in thread
* [U-Boot] [GIT PULL] Pull request: u-boot-imx
2011-10-28 12:37 Stefano Babic
@ 2011-10-28 15:20 ` Albert ARIBAUD
0 siblings, 0 replies; 116+ messages in thread
From: Albert ARIBAUD @ 2011-10-28 15:20 UTC (permalink / raw)
To: u-boot
Hi Stefano,
Le 28/10/2011 14:37, Stefano Babic a ?crit :
> Hi Albert,
>
> please pull from u-boot-imx.
>
> The following changes since commit ce5207e191c59b3135303fd03b98dd2ac3701ba2:
>
> e1000: Allow direct access to the E1000 SPI EEPROM device (2011-10-28
> 00:37:01 +0200)
>
> are available in the git repository at:
> git://www.denx.de/git/u-boot-imx.git master
>
> Fabio Estevam (12):
> qong: remove unneeded "1" from qong.h
> mx31pdk: Add MC13783 PMIC support
> mx31: Introduce mx31_set_gpr function
> qong: Use mx31_set_gpr to setup USBH2 pins
> qong: remove unneeded IOMUX settings
> rtc: Make mc13783-rtc driver generic
> mx51evk: Add RTC support
> mx51evk: Use GPIO API for configuring the IOMUX
> mx35pdk: Add RTC support
> mx51evk: Remove unneeded '1' from mx51evk.h
> mx51evk: Remove unused get_board_rev function
> vision2: Remove unused header file
>
> Helmut Raiger (4):
> misc: pmic: fix regression in pmic_fsl.c (SPI)
> mx31: define pins and init for UART2 and CSPI3
> mx31: add ESD control registers
> mx31: Add board support for HALE TT-01
>
> Marek Vasut (1):
> I2C: Fix mxc_i2c.c problem on imx31_phycore
>
> Stefano Babic (9):
> MX35: added ESDC structure to imx-regs
> MX35: add pins definition for UART3
> MX35: add reset cause as provided by other i.MX
> MX35: factorize common assembly code
> I2C: added I2C-2 and I2C-3 to MX35
> MX35: Drop unnecessary prototypes from imx-regs.h
> MX51: vision2: add MACH_TYPE in config file
> MX35: add support for flea3 board
> MX25: tx25: Fix building due to missing MACH_TYPE
>
> Wolfgang Grandegger (1):
> mx5 configs: CONFIG_PRIME should really be CONFIG_ETHPRIME
>
> MAINTAINERS | 5 +
> README | 2 +-
> arch/arm/cpu/arm1136/mx31/devices.c | 15 ++
> arch/arm/cpu/arm1136/mx31/generic.c | 15 ++
> arch/arm/cpu/arm1136/mx35/generic.c | 31 +++-
> arch/arm/include/asm/arch-mx31/clock.h | 2 +
> arch/arm/include/asm/arch-mx31/imx-regs.h | 67 ++++++
> arch/arm/include/asm/arch-mx35/imx-regs.h | 34 +++-
> arch/arm/include/asm/arch-mx35/lowlevel_macro.S | 140 +++++++++++
> arch/arm/include/asm/arch-mx35/mx35_pins.h | 3 +
> board/CarMediaLab/flea3/Makefile | 49 ++++
> board/CarMediaLab/flea3/flea3.c | 289
> +++++++++++++++++++++++
> board/CarMediaLab/flea3/lowlevel_init.S | 79 ++++++
> board/davedenx/qong/qong.c | 8 +-
> board/freescale/mx31pdk/mx31pdk.c | 12 +
> board/freescale/mx35pdk/mx35pdk.h | 18 --
> board/freescale/mx51evk/mx51evk.c | 17 +-
> board/hale/tt01/Makefile | 51 ++++
> board/hale/tt01/lowlevel_init.S | 32 +++
> board/hale/tt01/tt01.c | 200 ++++++++++++++++
> board/karo/tx25/tx25.c | 1 -
> board/ttcontrol/vision2/vision2.c | 1 -
> boards.cfg | 2 +
> drivers/i2c/mxc_i2c.c | 41 +++-
> drivers/misc/pmic_fsl.c | 5 +-
> drivers/misc/pmic_spi.c | 3 +-
> drivers/rtc/Makefile | 2 +-
> drivers/rtc/{mc13783-rtc.c => mc13xxx-rtc.c} | 0
> include/configs/efikamx.h | 2 +-
> include/configs/flea3.h | 286
> ++++++++++++++++++++++
> include/configs/imx31_litekit.h | 2 +-
> include/configs/mx31ads.h | 2 +-
> include/configs/mx31pdk.h | 2 +-
> include/configs/mx35pdk.h | 2 +
> include/configs/mx51evk.h | 14 +-
> include/configs/mx53ard.h | 2 +-
> include/configs/mx53evk.h | 2 +-
> include/configs/mx53loco.h | 2 +-
> include/configs/mx53smd.h | 2 +-
> include/configs/qong.h | 36 ++--
> include/configs/tt01.h | 254 ++++++++++++++++++++
> include/configs/tx25.h | 6 +
> include/configs/vision2.h | 5 +-
> 43 files changed, 1644 insertions(+), 99 deletions(-)
> create mode 100644 arch/arm/include/asm/arch-mx35/lowlevel_macro.S
> create mode 100644 board/CarMediaLab/flea3/Makefile
> create mode 100644 board/CarMediaLab/flea3/flea3.c
> create mode 100644 board/CarMediaLab/flea3/lowlevel_init.S
> create mode 100644 board/hale/tt01/Makefile
> create mode 100644 board/hale/tt01/lowlevel_init.S
> create mode 100644 board/hale/tt01/tt01.c
> rename drivers/rtc/{mc13783-rtc.c => mc13xxx-rtc.c} (100%)
> create mode 100644 include/configs/flea3.h
> create mode 100644 include/configs/tt01.h
>
> Thanks,
> Stefano
Applied to u-boot-arm/master, thanks!
Amicalement,
--
Albert.
^ permalink raw reply [flat|nested] 116+ messages in thread
* [U-Boot] [GIT PULL] Pull request: u-boot-imx
@ 2011-10-28 12:37 Stefano Babic
2011-10-28 15:20 ` Albert ARIBAUD
0 siblings, 1 reply; 116+ messages in thread
From: Stefano Babic @ 2011-10-28 12:37 UTC (permalink / raw)
To: u-boot
Hi Albert,
please pull from u-boot-imx.
The following changes since commit ce5207e191c59b3135303fd03b98dd2ac3701ba2:
e1000: Allow direct access to the E1000 SPI EEPROM device (2011-10-28
00:37:01 +0200)
are available in the git repository at:
git://www.denx.de/git/u-boot-imx.git master
Fabio Estevam (12):
qong: remove unneeded "1" from qong.h
mx31pdk: Add MC13783 PMIC support
mx31: Introduce mx31_set_gpr function
qong: Use mx31_set_gpr to setup USBH2 pins
qong: remove unneeded IOMUX settings
rtc: Make mc13783-rtc driver generic
mx51evk: Add RTC support
mx51evk: Use GPIO API for configuring the IOMUX
mx35pdk: Add RTC support
mx51evk: Remove unneeded '1' from mx51evk.h
mx51evk: Remove unused get_board_rev function
vision2: Remove unused header file
Helmut Raiger (4):
misc: pmic: fix regression in pmic_fsl.c (SPI)
mx31: define pins and init for UART2 and CSPI3
mx31: add ESD control registers
mx31: Add board support for HALE TT-01
Marek Vasut (1):
I2C: Fix mxc_i2c.c problem on imx31_phycore
Stefano Babic (9):
MX35: added ESDC structure to imx-regs
MX35: add pins definition for UART3
MX35: add reset cause as provided by other i.MX
MX35: factorize common assembly code
I2C: added I2C-2 and I2C-3 to MX35
MX35: Drop unnecessary prototypes from imx-regs.h
MX51: vision2: add MACH_TYPE in config file
MX35: add support for flea3 board
MX25: tx25: Fix building due to missing MACH_TYPE
Wolfgang Grandegger (1):
mx5 configs: CONFIG_PRIME should really be CONFIG_ETHPRIME
MAINTAINERS | 5 +
README | 2 +-
arch/arm/cpu/arm1136/mx31/devices.c | 15 ++
arch/arm/cpu/arm1136/mx31/generic.c | 15 ++
arch/arm/cpu/arm1136/mx35/generic.c | 31 +++-
arch/arm/include/asm/arch-mx31/clock.h | 2 +
arch/arm/include/asm/arch-mx31/imx-regs.h | 67 ++++++
arch/arm/include/asm/arch-mx35/imx-regs.h | 34 +++-
arch/arm/include/asm/arch-mx35/lowlevel_macro.S | 140 +++++++++++
arch/arm/include/asm/arch-mx35/mx35_pins.h | 3 +
board/CarMediaLab/flea3/Makefile | 49 ++++
board/CarMediaLab/flea3/flea3.c | 289
+++++++++++++++++++++++
board/CarMediaLab/flea3/lowlevel_init.S | 79 ++++++
board/davedenx/qong/qong.c | 8 +-
board/freescale/mx31pdk/mx31pdk.c | 12 +
board/freescale/mx35pdk/mx35pdk.h | 18 --
board/freescale/mx51evk/mx51evk.c | 17 +-
board/hale/tt01/Makefile | 51 ++++
board/hale/tt01/lowlevel_init.S | 32 +++
board/hale/tt01/tt01.c | 200 ++++++++++++++++
board/karo/tx25/tx25.c | 1 -
board/ttcontrol/vision2/vision2.c | 1 -
boards.cfg | 2 +
drivers/i2c/mxc_i2c.c | 41 +++-
drivers/misc/pmic_fsl.c | 5 +-
drivers/misc/pmic_spi.c | 3 +-
drivers/rtc/Makefile | 2 +-
drivers/rtc/{mc13783-rtc.c => mc13xxx-rtc.c} | 0
include/configs/efikamx.h | 2 +-
include/configs/flea3.h | 286
++++++++++++++++++++++
include/configs/imx31_litekit.h | 2 +-
include/configs/mx31ads.h | 2 +-
include/configs/mx31pdk.h | 2 +-
include/configs/mx35pdk.h | 2 +
include/configs/mx51evk.h | 14 +-
include/configs/mx53ard.h | 2 +-
include/configs/mx53evk.h | 2 +-
include/configs/mx53loco.h | 2 +-
include/configs/mx53smd.h | 2 +-
include/configs/qong.h | 36 ++--
include/configs/tt01.h | 254 ++++++++++++++++++++
include/configs/tx25.h | 6 +
include/configs/vision2.h | 5 +-
43 files changed, 1644 insertions(+), 99 deletions(-)
create mode 100644 arch/arm/include/asm/arch-mx35/lowlevel_macro.S
create mode 100644 board/CarMediaLab/flea3/Makefile
create mode 100644 board/CarMediaLab/flea3/flea3.c
create mode 100644 board/CarMediaLab/flea3/lowlevel_init.S
create mode 100644 board/hale/tt01/Makefile
create mode 100644 board/hale/tt01/lowlevel_init.S
create mode 100644 board/hale/tt01/tt01.c
rename drivers/rtc/{mc13783-rtc.c => mc13xxx-rtc.c} (100%)
create mode 100644 include/configs/flea3.h
create mode 100644 include/configs/tt01.h
Thanks,
Stefano
--
=====================================================================
DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: +49-8142-66989-0 Fax: +49-8142-66989-80 Email: office at denx.de
=====================================================================
^ permalink raw reply [flat|nested] 116+ messages in thread
* [U-Boot] [GIT PULL] Pull request: u-boot-imx
2011-10-17 8:05 Stefano Babic
2011-10-18 18:12 ` Albert ARIBAUD
@ 2011-10-19 11:25 ` Albert ARIBAUD
1 sibling, 0 replies; 116+ messages in thread
From: Albert ARIBAUD @ 2011-10-19 11:25 UTC (permalink / raw)
To: u-boot
Hi Stefano,
Le 17/10/2011 10:05, Stefano Babic a ?crit :
> Hi Albert,
>
> please pull from u-boot-imx, thanks. Generating the pull request I see
> that three patches are missing (the three patches by ?ukasz Majewski).
> However, everything in the tree seems correct and the tree is already
> rebased on uboot_arm. Let me know if you find any issue.
>
> The following changes since commit e36544d37385c4a4b525e18326feb3664d2268fa:
>
> omap: overo: Disable pull-ups on camera PCLK, HS and VS signals
> (2011-10-14 22:15:13 +0200)
>
> are available in the git repository at:
> git://www.denx.de/git/u-boot-imx.git master
Applied to u-boot-arm/master, with the agreed-upon amendment to the list
of patches and ownership:
> Fabio Estevam (2):
> mx31pdk: Remove unneeded config
> imx: fix coding style
>
> Helmut Raiger (1):
> mx31: provide readable WEIM CS accessor
>
> Marek Vasut (1):
> I2C: Add i2c_get/set_speed() to mxc_i2c.c
>
> Stefano Babic (15):
> MX51: vision2: Set global macros
> misc: pmic: Freescale PMIC switches to generic PMIC driver
> MX5: vision2: use new pmic driver
> RTC: Switch mc13783 to generic pmic code
> MX3: qong: use new pmic driver
> MX5: efikamx/efikasb: use new pmic driver
> misc: pmic: use I2C_SET_BUS in pmic I2C
> misc: pmic: addI2C support to pmic_fsl driver
> MX35: mx35pdk: use new pmic driver
> MX5: mx51evk: use new pmic driver
> MX5: mx53evk: use new pmic driver
> MX31: mx31_litekit: use new pmic driver
> MX31: mx31ads: use new pmic driver
MX31: mx31pdk: use new pmic driver
misc: pmic: drop old Freescale's pmic driver
?ukasz Majewski (3):
misc:pmic:core New generic PMIC driver
> misc:pmic:max8998 MAX8998 support at a new PMIC driver.
> misc:pmic:samsung Enable PMIC driver at GONI target
>
> arch/arm/cpu/arm1136/mx31/generic.c | 11 ++
> arch/arm/cpu/arm1136/mx31/timer.c | 23 ++-
> arch/arm/cpu/arm1136/mx35/generic.c | 2 +-
> arch/arm/cpu/arm926ejs/mx25/generic.c | 110 +++++++-------
> arch/arm/cpu/arm926ejs/mx25/reset.c | 2 +-
> arch/arm/cpu/arm926ejs/mx25/timer.c | 16 +-
> arch/arm/cpu/arm926ejs/mx27/reset.c | 2 +-
> arch/arm/cpu/arm926ejs/mx27/timer.c | 14 +-
> arch/arm/cpu/armv7/mx5/soc.c | 10 +-
> arch/arm/include/asm/arch-mx31/imx-regs.h | 35 ++++-
> arch/arm/include/asm/arch-mx31/sys_proto.h | 35 ++++
> arch/arm/include/asm/arch-mx5/sys_proto.h | 8 +
> board/davedenx/qong/qong.c | 107 ++++++-------
> board/efikamx/efikamx.c | 51 ++++---
> board/freescale/mx31ads/mx31ads.c | 16 ++-
> board/freescale/mx31pdk/mx31pdk.c | 14 ++-
> board/freescale/mx35pdk/mx35pdk.c | 18 ++-
> board/freescale/mx51evk/mx51evk.c | 47 +++---
> board/freescale/mx53evk/mx53evk.c | 17 ++-
> board/imx31_phycore/imx31_phycore.c | 41 ++++-
> board/karo/tx25/tx25.c | 2 +-
> board/logicpd/imx27lite/imx27lite.c | 6 +-
> board/logicpd/imx31_litekit/imx31_litekit.c | 30 +++-
> board/samsung/goni/goni.c | 4 +
> board/ttcontrol/vision2/vision2.c | 33 +++--
> boards.cfg | 3 +-
> drivers/i2c/mxc_i2c.c | 31 +++-
> drivers/misc/Makefile | 6 +-
> drivers/misc/fsl_pmic.c | 235
> ---------------------------
> drivers/misc/pmic_core.c | 147 +++++++++++++++++
> drivers/misc/pmic_fsl.c | 66 ++++++++
> drivers/misc/pmic_i2c.c | 92 +++++++++++
> drivers/misc/pmic_max8998.c | 43 +++++
> drivers/misc/pmic_spi.c | 109 +++++++++++++
> drivers/rtc/mc13783-rtc.c | 20 ++-
> include/configs/efikamx.h | 5 +-
> include/configs/imx31_litekit.h | 9 +-
> include/configs/mx31ads.h | 8 +-
> include/configs/mx31pdk.h | 6 +-
> include/configs/mx35pdk.h | 5 +-
> include/configs/mx51evk.h | 6 +-
> include/configs/mx53evk.h | 5 +-
> include/configs/qong.h | 5 +-
> include/configs/s5p_goni.h | 4 +
> include/configs/vision2.h | 22 ++-
> include/fsl_pmic.h | 5 +-
> include/max8998_pmic.h | 84 ++++++++++
> include/pmic.h | 71 ++++++++
> 48 files changed, 1110 insertions(+), 531 deletions(-)
> create mode 100644 arch/arm/include/asm/arch-mx31/sys_proto.h
> delete mode 100644 drivers/misc/fsl_pmic.c
> create mode 100644 drivers/misc/pmic_core.c
> create mode 100644 drivers/misc/pmic_fsl.c
> create mode 100644 drivers/misc/pmic_i2c.c
> create mode 100644 drivers/misc/pmic_max8998.c
> create mode 100644 drivers/misc/pmic_spi.c
> create mode 100644 include/max8998_pmic.h
> create mode 100644 include/pmic.h
>
> Thanks,
> Stefano
>
Amicalement,
--
Albert.
^ permalink raw reply [flat|nested] 116+ messages in thread
* [U-Boot] [GIT PULL] Pull request: u-boot-imx
2011-10-18 18:12 ` Albert ARIBAUD
@ 2011-10-19 9:30 ` Stefano Babic
0 siblings, 0 replies; 116+ messages in thread
From: Stefano Babic @ 2011-10-19 9:30 UTC (permalink / raw)
To: u-boot
On 10/18/2011 08:12 PM, Albert ARIBAUD wrote:
>
> Weird: these two commits:
>
>> misc:pmic:max8998 MAX8998 support at a new PMIC driver.
>> misc:pmic:samsung Enable PMIC driver at GONI target
>
> are attributed to you
..and they should not be...
> whereas in your branch they are attributed to
> ?ukasz Majewski --
That is correct - everything in the branch seems correct, but the
generated pull-request is wrong - weird ! I have already tried to
cherry-pick each single patch and then to check, but at the end I got
always a wrong pull-request list. I have supposed that is related to UTF
character in ?ukasz name, but I am probably wrong.
> plus a third one not mentioned above. I did a git
> request-pull on my side, and find the following entries:
>
> Stefano Babic (15):
> MX51: vision2: Set global macros
> misc: pmic: Freescale PMIC switches to generic PMIC driver
> MX5: vision2: use new pmic driver
> RTC: Switch mc13783 to generic pmic code
> MX3: qong: use new pmic driver
> MX5: efikamx/efikasb: use new pmic driver
> misc: pmic: use I2C_SET_BUS in pmic I2C
> misc: pmic: addI2C support to pmic_fsl driver
> MX35: mx35pdk: use new pmic driver
> MX5: mx51evk: use new pmic driver
> MX5: mx53evk: use new pmic driver
> MX31: mx31_litekit: use new pmic driver
> MX31: mx31ads: use new pmic driver
> (the next two commits are missing in your list)
> MX31: mx31pdk: use new pmic driver
> misc: pmic: drop old Freescale's pmic driver
>
> ?ukasz Majewski (3):
> (the next commit is missing in your list)
> misc:pmic:core New generic PMIC driver
> (the next two commits are misattributed in your list)
> misc:pmic:max8998 MAX8998 support at a new PMIC driver.
> misc:pmic:samsung Enable PMIC driver at GONI target
>
This is correct. It is exactly what I wanted...
Meanwhile (and I do neither touched the u-boot-imx, nor updated my PC),
git pull-request delivers today the right list:
The following changes since commit e36544d37385c4a4b525e18326feb3664d2268fa:
omap: overo: Disable pull-ups on camera PCLK, HS and VS signals
(2011-10-14 22:15:13 +0200)
are available in the git repository at:
git://www.denx.de/git/u-boot-imx.git master
Fabio Estevam (2):
mx31pdk: Remove unneeded config
imx: fix coding style
Helmut Raiger (1):
mx31: provide readable WEIM CS accessor
Marek Vasut (1):
I2C: Add i2c_get/set_speed() to mxc_i2c.c
Stefano Babic (15):
MX51: vision2: Set global macros
misc: pmic: Freescale PMIC switches to generic PMIC driver
MX5: vision2: use new pmic driver
RTC: Switch mc13783 to generic pmic code
MX3: qong: use new pmic driver
MX5: efikamx/efikasb: use new pmic driver
misc: pmic: use I2C_SET_BUS in pmic I2C
misc: pmic: addI2C support to pmic_fsl driver
MX35: mx35pdk: use new pmic driver
MX5: mx51evk: use new pmic driver
MX5: mx53evk: use new pmic driver
MX31: mx31_litekit: use new pmic driver
MX31: mx31ads: use new pmic driver
MX31: mx31pdk: use new pmic driver
misc: pmic: drop old Freescale's pmic driver
?ukasz Majewski (3):
misc:pmic:core New generic PMIC driver
misc:pmic:max8998 MAX8998 support at a new PMIC driver.
misc:pmic:samsung Enable PMIC driver at GONI target
> Note that I find the same list of modifications as stated below, which
> implies that only the attribution list above is incorrect.
>
>> arch/arm/cpu/arm1136/mx31/generic.c | 11 ++
>> arch/arm/cpu/arm1136/mx31/timer.c | 23 ++-
>> arch/arm/cpu/arm1136/mx35/generic.c | 2 +-
>> arch/arm/cpu/arm926ejs/mx25/generic.c | 110 +++++++-------
>> arch/arm/cpu/arm926ejs/mx25/reset.c | 2 +-
>> arch/arm/cpu/arm926ejs/mx25/timer.c | 16 +-
>> arch/arm/cpu/arm926ejs/mx27/reset.c | 2 +-
Yes, that is correct.
>
> Can you double-check this u-boot-imx/master branch?
Everything seems correct, and today even a correct pull-request is
generated...no idea really why the list was wrong !
thanks,
Stefano
--
=====================================================================
DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: +49-8142-66989-0 Fax: +49-8142-66989-80 Email: office at denx.de
=====================================================================
^ permalink raw reply [flat|nested] 116+ messages in thread
* [U-Boot] [GIT PULL] Pull request: u-boot-imx
2011-10-17 8:05 Stefano Babic
@ 2011-10-18 18:12 ` Albert ARIBAUD
2011-10-19 9:30 ` Stefano Babic
2011-10-19 11:25 ` Albert ARIBAUD
1 sibling, 1 reply; 116+ messages in thread
From: Albert ARIBAUD @ 2011-10-18 18:12 UTC (permalink / raw)
To: u-boot
Le 17/10/2011 10:05, Stefano Babic a ?crit :
> Hi Albert,
>
> please pull from u-boot-imx, thanks. Generating the pull request I see
> that three patches are missing (the three patches by ?ukasz Majewski).
> However, everything in the tree seems correct and the tree is already
> rebased on uboot_arm. Let me know if you find any issue.
>
> The following changes since commit e36544d37385c4a4b525e18326feb3664d2268fa:
>
> omap: overo: Disable pull-ups on camera PCLK, HS and VS signals
> (2011-10-14 22:15:13 +0200)
>
> are available in the git repository at:
> git://www.denx.de/git/u-boot-imx.git master
>
> Fabio Estevam (2):
> mx31pdk: Remove unneeded config
> imx: fix coding style
>
> Helmut Raiger (1):
> mx31: provide readable WEIM CS accessor
>
> Marek Vasut (1):
> I2C: Add i2c_get/set_speed() to mxc_i2c.c
>
> Stefano Babic (15):
> MX51: vision2: Set global macros
> misc: pmic: Freescale PMIC switches to generic PMIC driver
> MX5: vision2: use new pmic driver
> RTC: Switch mc13783 to generic pmic code
> MX3: qong: use new pmic driver
> MX5: efikamx/efikasb: use new pmic driver
> misc: pmic: use I2C_SET_BUS in pmic I2C
> misc: pmic: addI2C support to pmic_fsl driver
> MX35: mx35pdk: use new pmic driver
> MX5: mx51evk: use new pmic driver
> MX5: mx53evk: use new pmic driver
> MX31: mx31_litekit: use new pmic driver
> MX31: mx31ads: use new pmic driver
Weird: these two commits:
> misc:pmic:max8998 MAX8998 support at a new PMIC driver.
> misc:pmic:samsung Enable PMIC driver at GONI target
are attributed to you whereas in your branch they are attributed to
?ukasz Majewski -- plus a third one not mentioned above. I did a git
request-pull on my side, and find the following entries:
Stefano Babic (15):
MX51: vision2: Set global macros
misc: pmic: Freescale PMIC switches to generic PMIC driver
MX5: vision2: use new pmic driver
RTC: Switch mc13783 to generic pmic code
MX3: qong: use new pmic driver
MX5: efikamx/efikasb: use new pmic driver
misc: pmic: use I2C_SET_BUS in pmic I2C
misc: pmic: addI2C support to pmic_fsl driver
MX35: mx35pdk: use new pmic driver
MX5: mx51evk: use new pmic driver
MX5: mx53evk: use new pmic driver
MX31: mx31_litekit: use new pmic driver
MX31: mx31ads: use new pmic driver
(the next two commits are missing in your list)
MX31: mx31pdk: use new pmic driver
misc: pmic: drop old Freescale's pmic driver
?ukasz Majewski (3):
(the next commit is missing in your list)
misc:pmic:core New generic PMIC driver
(the next two commits are misattributed in your list)
misc:pmic:max8998 MAX8998 support at a new PMIC driver.
misc:pmic:samsung Enable PMIC driver at GONI target
Note that I find the same list of modifications as stated below, which
implies that only the attribution list above is incorrect.
> arch/arm/cpu/arm1136/mx31/generic.c | 11 ++
> arch/arm/cpu/arm1136/mx31/timer.c | 23 ++-
> arch/arm/cpu/arm1136/mx35/generic.c | 2 +-
> arch/arm/cpu/arm926ejs/mx25/generic.c | 110 +++++++-------
> arch/arm/cpu/arm926ejs/mx25/reset.c | 2 +-
> arch/arm/cpu/arm926ejs/mx25/timer.c | 16 +-
> arch/arm/cpu/arm926ejs/mx27/reset.c | 2 +-
> arch/arm/cpu/arm926ejs/mx27/timer.c | 14 +-
> arch/arm/cpu/armv7/mx5/soc.c | 10 +-
> arch/arm/include/asm/arch-mx31/imx-regs.h | 35 ++++-
> arch/arm/include/asm/arch-mx31/sys_proto.h | 35 ++++
> arch/arm/include/asm/arch-mx5/sys_proto.h | 8 +
> board/davedenx/qong/qong.c | 107 ++++++-------
> board/efikamx/efikamx.c | 51 ++++---
> board/freescale/mx31ads/mx31ads.c | 16 ++-
> board/freescale/mx31pdk/mx31pdk.c | 14 ++-
> board/freescale/mx35pdk/mx35pdk.c | 18 ++-
> board/freescale/mx51evk/mx51evk.c | 47 +++---
> board/freescale/mx53evk/mx53evk.c | 17 ++-
> board/imx31_phycore/imx31_phycore.c | 41 ++++-
> board/karo/tx25/tx25.c | 2 +-
> board/logicpd/imx27lite/imx27lite.c | 6 +-
> board/logicpd/imx31_litekit/imx31_litekit.c | 30 +++-
> board/samsung/goni/goni.c | 4 +
> board/ttcontrol/vision2/vision2.c | 33 +++--
> boards.cfg | 3 +-
> drivers/i2c/mxc_i2c.c | 31 +++-
> drivers/misc/Makefile | 6 +-
> drivers/misc/fsl_pmic.c | 235
> ---------------------------
> drivers/misc/pmic_core.c | 147 +++++++++++++++++
> drivers/misc/pmic_fsl.c | 66 ++++++++
> drivers/misc/pmic_i2c.c | 92 +++++++++++
> drivers/misc/pmic_max8998.c | 43 +++++
> drivers/misc/pmic_spi.c | 109 +++++++++++++
> drivers/rtc/mc13783-rtc.c | 20 ++-
> include/configs/efikamx.h | 5 +-
> include/configs/imx31_litekit.h | 9 +-
> include/configs/mx31ads.h | 8 +-
> include/configs/mx31pdk.h | 6 +-
> include/configs/mx35pdk.h | 5 +-
> include/configs/mx51evk.h | 6 +-
> include/configs/mx53evk.h | 5 +-
> include/configs/qong.h | 5 +-
> include/configs/s5p_goni.h | 4 +
> include/configs/vision2.h | 22 ++-
> include/fsl_pmic.h | 5 +-
> include/max8998_pmic.h | 84 ++++++++++
> include/pmic.h | 71 ++++++++
> 48 files changed, 1110 insertions(+), 531 deletions(-)
> create mode 100644 arch/arm/include/asm/arch-mx31/sys_proto.h
> delete mode 100644 drivers/misc/fsl_pmic.c
> create mode 100644 drivers/misc/pmic_core.c
> create mode 100644 drivers/misc/pmic_fsl.c
> create mode 100644 drivers/misc/pmic_i2c.c
> create mode 100644 drivers/misc/pmic_max8998.c
> create mode 100644 drivers/misc/pmic_spi.c
> create mode 100644 include/max8998_pmic.h
> create mode 100644 include/pmic.h
Can you double-check this u-boot-imx/master branch?
> Thanks,
> Stefano
Amicalement,
--
Albert.
^ permalink raw reply [flat|nested] 116+ messages in thread
* [U-Boot] [GIT PULL] Pull request: u-boot-imx
@ 2011-10-17 8:05 Stefano Babic
2011-10-18 18:12 ` Albert ARIBAUD
2011-10-19 11:25 ` Albert ARIBAUD
0 siblings, 2 replies; 116+ messages in thread
From: Stefano Babic @ 2011-10-17 8:05 UTC (permalink / raw)
To: u-boot
Hi Albert,
please pull from u-boot-imx, thanks. Generating the pull request I see
that three patches are missing (the three patches by ?ukasz Majewski).
However, everything in the tree seems correct and the tree is already
rebased on uboot_arm. Let me know if you find any issue.
The following changes since commit e36544d37385c4a4b525e18326feb3664d2268fa:
omap: overo: Disable pull-ups on camera PCLK, HS and VS signals
(2011-10-14 22:15:13 +0200)
are available in the git repository at:
git://www.denx.de/git/u-boot-imx.git master
Fabio Estevam (2):
mx31pdk: Remove unneeded config
imx: fix coding style
Helmut Raiger (1):
mx31: provide readable WEIM CS accessor
Marek Vasut (1):
I2C: Add i2c_get/set_speed() to mxc_i2c.c
Stefano Babic (15):
MX51: vision2: Set global macros
misc: pmic: Freescale PMIC switches to generic PMIC driver
MX5: vision2: use new pmic driver
RTC: Switch mc13783 to generic pmic code
MX3: qong: use new pmic driver
MX5: efikamx/efikasb: use new pmic driver
misc: pmic: use I2C_SET_BUS in pmic I2C
misc: pmic: addI2C support to pmic_fsl driver
MX35: mx35pdk: use new pmic driver
MX5: mx51evk: use new pmic driver
MX5: mx53evk: use new pmic driver
MX31: mx31_litekit: use new pmic driver
MX31: mx31ads: use new pmic driver
misc:pmic:max8998 MAX8998 support at a new PMIC driver.
misc:pmic:samsung Enable PMIC driver at GONI target
arch/arm/cpu/arm1136/mx31/generic.c | 11 ++
arch/arm/cpu/arm1136/mx31/timer.c | 23 ++-
arch/arm/cpu/arm1136/mx35/generic.c | 2 +-
arch/arm/cpu/arm926ejs/mx25/generic.c | 110 +++++++-------
arch/arm/cpu/arm926ejs/mx25/reset.c | 2 +-
arch/arm/cpu/arm926ejs/mx25/timer.c | 16 +-
arch/arm/cpu/arm926ejs/mx27/reset.c | 2 +-
arch/arm/cpu/arm926ejs/mx27/timer.c | 14 +-
arch/arm/cpu/armv7/mx5/soc.c | 10 +-
arch/arm/include/asm/arch-mx31/imx-regs.h | 35 ++++-
arch/arm/include/asm/arch-mx31/sys_proto.h | 35 ++++
arch/arm/include/asm/arch-mx5/sys_proto.h | 8 +
board/davedenx/qong/qong.c | 107 ++++++-------
board/efikamx/efikamx.c | 51 ++++---
board/freescale/mx31ads/mx31ads.c | 16 ++-
board/freescale/mx31pdk/mx31pdk.c | 14 ++-
board/freescale/mx35pdk/mx35pdk.c | 18 ++-
board/freescale/mx51evk/mx51evk.c | 47 +++---
board/freescale/mx53evk/mx53evk.c | 17 ++-
board/imx31_phycore/imx31_phycore.c | 41 ++++-
board/karo/tx25/tx25.c | 2 +-
board/logicpd/imx27lite/imx27lite.c | 6 +-
board/logicpd/imx31_litekit/imx31_litekit.c | 30 +++-
board/samsung/goni/goni.c | 4 +
board/ttcontrol/vision2/vision2.c | 33 +++--
boards.cfg | 3 +-
drivers/i2c/mxc_i2c.c | 31 +++-
drivers/misc/Makefile | 6 +-
drivers/misc/fsl_pmic.c | 235
---------------------------
drivers/misc/pmic_core.c | 147 +++++++++++++++++
drivers/misc/pmic_fsl.c | 66 ++++++++
drivers/misc/pmic_i2c.c | 92 +++++++++++
drivers/misc/pmic_max8998.c | 43 +++++
drivers/misc/pmic_spi.c | 109 +++++++++++++
drivers/rtc/mc13783-rtc.c | 20 ++-
include/configs/efikamx.h | 5 +-
include/configs/imx31_litekit.h | 9 +-
include/configs/mx31ads.h | 8 +-
include/configs/mx31pdk.h | 6 +-
include/configs/mx35pdk.h | 5 +-
include/configs/mx51evk.h | 6 +-
include/configs/mx53evk.h | 5 +-
include/configs/qong.h | 5 +-
include/configs/s5p_goni.h | 4 +
include/configs/vision2.h | 22 ++-
include/fsl_pmic.h | 5 +-
include/max8998_pmic.h | 84 ++++++++++
include/pmic.h | 71 ++++++++
48 files changed, 1110 insertions(+), 531 deletions(-)
create mode 100644 arch/arm/include/asm/arch-mx31/sys_proto.h
delete mode 100644 drivers/misc/fsl_pmic.c
create mode 100644 drivers/misc/pmic_core.c
create mode 100644 drivers/misc/pmic_fsl.c
create mode 100644 drivers/misc/pmic_i2c.c
create mode 100644 drivers/misc/pmic_max8998.c
create mode 100644 drivers/misc/pmic_spi.c
create mode 100644 include/max8998_pmic.h
create mode 100644 include/pmic.h
Thanks,
Stefano
--
=====================================================================
DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: +49-8142-66989-0 Fax: +49-8142-66989-80 Email: office at denx.de
=====================================================================
^ permalink raw reply [flat|nested] 116+ messages in thread
* [U-Boot] [GIT PULL] Pull request: u-boot-imx
2011-09-08 14:34 Stefano Babic
@ 2011-09-08 14:59 ` Albert ARIBAUD
0 siblings, 0 replies; 116+ messages in thread
From: Albert ARIBAUD @ 2011-09-08 14:59 UTC (permalink / raw)
To: u-boot
Hi Stefano,
Le 08/09/2011 16:34, Stefano Babic a ?crit :
> Hi Albert,
>
> Wolfgang has merged himself most of pending IMX patches. However, a few
> are missing and for the rest we agree we go on the "normal" way via pull
> request. With this pull request all IMX boards should be fixed.
>
> The following changes since commit 63cf97e825b8d821e2d3d6d6c6604634ac24810a:
>
> omap3: beagle: Fix build warning (2011-09-08 07:39:55 +0200)
>
> are available in the git repository at:
> git://www.denx.de/git/u-boot-imx.git master
>
> Fabio Estevam (2):
> MX25: tx25: Fix build by making use of GPIO framework
> MX25: tx25: Cleanup tx25.h config
>
> Stefano Babic (1):
> MX31: mx31pdk: make use of GPIO framework
>
> board/karo/tx25/tx25.c | 1 +
> include/configs/mx31pdk.h | 1 +
> include/configs/tx25.h | 16 ++++++++--------
> 3 files changed, 10 insertions(+), 8 deletions(-)
Applied to u-boot-arm/master, thanks!
> Regards,
> Stefano
Amicalement,
--
Albert.
^ permalink raw reply [flat|nested] 116+ messages in thread
* [U-Boot] [GIT PULL] Pull request: u-boot-imx
@ 2011-09-08 14:34 Stefano Babic
2011-09-08 14:59 ` Albert ARIBAUD
0 siblings, 1 reply; 116+ messages in thread
From: Stefano Babic @ 2011-09-08 14:34 UTC (permalink / raw)
To: u-boot
Hi Albert,
Wolfgang has merged himself most of pending IMX patches. However, a few
are missing and for the rest we agree we go on the "normal" way via pull
request. With this pull request all IMX boards should be fixed.
The following changes since commit 63cf97e825b8d821e2d3d6d6c6604634ac24810a:
omap3: beagle: Fix build warning (2011-09-08 07:39:55 +0200)
are available in the git repository at:
git://www.denx.de/git/u-boot-imx.git master
Fabio Estevam (2):
MX25: tx25: Fix build by making use of GPIO framework
MX25: tx25: Cleanup tx25.h config
Stefano Babic (1):
MX31: mx31pdk: make use of GPIO framework
board/karo/tx25/tx25.c | 1 +
include/configs/mx31pdk.h | 1 +
include/configs/tx25.h | 16 ++++++++--------
3 files changed, 10 insertions(+), 8 deletions(-)
Regards,
Stefano
--
=====================================================================
DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: +49-8142-66989-0 Fax: +49-8142-66989-80 Email: office at denx.de
=====================================================================
^ permalink raw reply [flat|nested] 116+ messages in thread
* [U-Boot] [GIT PULL] Pull request: u-boot-imx
2011-08-26 14:23 Stefano Babic
@ 2011-08-30 9:18 ` Albert ARIBAUD
0 siblings, 0 replies; 116+ messages in thread
From: Albert ARIBAUD @ 2011-08-30 9:18 UTC (permalink / raw)
To: u-boot
Hi Stefano,
Le 26/08/2011 16:23, Stefano Babic a ?crit :
> Hi Albert,
>
> please pull from u-boot-imx:
>
> The following changes since commit 5557e86bb0793012057d5462976c2a902bc629ac:
>
> omap4: increase SRAM budget to fix build error (2011-08-21 10:14:51 +0200)
>
> are available in the git repository at:
> git://www.denx.de/git/u-boot-imx.git master
>
> David Jander (1):
> ARM: MX51: PLL errata workaround
>
> Fabio Estevam (1):
> mx53: ddr3: Update DD3 initialization
>
> Stefano Babic (20):
> MX35: MX35PDK: support additional RAM on CSD1
> MX: MX35 / MX5: uniform clock command with powerpc
> IMX: uniform GPIO interface using GPIO framework
> MX25: make use of GPIO framework for MX25 processor
> MX31: make use of GPIO framework for MX31 processor
> MX5: make use of GPIO framework for MX5 processor
> MX35: make use of GPIO framework for MX35 processor
> MX31: QONG: make use of GPIO framework
> MX5: efikamx: make use of GPIO framework
> MX25: zmx25: make use of GPIO framework
> MX5: mx53ard: make use of GPIO framework
> MX5: mx53smd: make use of GPIO framework
> MX5: vision2: make use of GPIO framework
> MX5: mx53evk: make use of GPIO framework
> MX5: mx53loco: make use of GPIO framework
> MX35: mx35pdk: make use of GPIO framework
> MX5: mx51evk: make use of GPIO framework
> MX31: mx31ads: make use of GPIO framework
> MX31: imx31_litekit: make use of GPIO framework
> IMX: scb9328: drop warnings
Applied (after rebasing) to u-boot-arm/master, thanks !
Amicalement,
--
Albert.
^ permalink raw reply [flat|nested] 116+ messages in thread
* [U-Boot] [GIT PULL] Pull request: u-boot-imx
@ 2011-08-26 14:23 Stefano Babic
2011-08-30 9:18 ` Albert ARIBAUD
0 siblings, 1 reply; 116+ messages in thread
From: Stefano Babic @ 2011-08-26 14:23 UTC (permalink / raw)
To: u-boot
Hi Albert,
please pull from u-boot-imx:
The following changes since commit 5557e86bb0793012057d5462976c2a902bc629ac:
omap4: increase SRAM budget to fix build error (2011-08-21 10:14:51 +0200)
are available in the git repository at:
git://www.denx.de/git/u-boot-imx.git master
David Jander (1):
ARM: MX51: PLL errata workaround
Fabio Estevam (1):
mx53: ddr3: Update DD3 initialization
Stefano Babic (20):
MX35: MX35PDK: support additional RAM on CSD1
MX: MX35 / MX5: uniform clock command with powerpc
IMX: uniform GPIO interface using GPIO framework
MX25: make use of GPIO framework for MX25 processor
MX31: make use of GPIO framework for MX31 processor
MX5: make use of GPIO framework for MX5 processor
MX35: make use of GPIO framework for MX35 processor
MX31: QONG: make use of GPIO framework
MX5: efikamx: make use of GPIO framework
MX25: zmx25: make use of GPIO framework
MX5: mx53ard: make use of GPIO framework
MX5: mx53smd: make use of GPIO framework
MX5: vision2: make use of GPIO framework
MX5: mx53evk: make use of GPIO framework
MX5: mx53loco: make use of GPIO framework
MX35: mx35pdk: make use of GPIO framework
MX5: mx51evk: make use of GPIO framework
MX31: mx31ads: make use of GPIO framework
MX31: imx31_litekit: make use of GPIO framework
IMX: scb9328: drop warnings
arch/arm/cpu/arm1136/mx35/generic.c | 4 +-
arch/arm/cpu/armv7/mx5/clock.c | 4 +-
arch/arm/cpu/armv7/mx5/lowlevel_init.S | 38 +++++++++++
.../arm/include/asm/arch-mx25/gpio.h | 42 ++++--------
arch/arm/include/asm/arch-mx25/imx-regs.h | 12 ---
arch/arm/include/asm/arch-mx31/gpio.h | 35 ++++++++++
arch/arm/include/asm/arch-mx31/imx-regs.h | 7 --
arch/arm/include/asm/arch-mx35/gpio.h | 40 +++++++++++
arch/arm/include/asm/arch-mx5/gpio.h | 35 ++++++++++
arch/arm/include/asm/arch-mx5/imx-regs.h | 12 ++--
board/davedenx/qong/fpga.c | 10 ++--
board/davedenx/qong/qong.c | 36 +++++-----
board/efikamx/efikamx.c | 62
+++++++-----------
board/freescale/mx35pdk/lowlevel_init.S | 9 ++-
board/freescale/mx35pdk/mx35pdk.c | 22 +++++--
board/freescale/mx51evk/mx51evk.c | 18 ++----
board/freescale/mx53ard/imximage_dd3.cfg | 6 +-
board/freescale/mx53ard/mx53ard.c | 8 +-
board/freescale/mx53evk/mx53evk.c | 6 +-
board/freescale/mx53loco/imximage.cfg | 6 +-
board/freescale/mx53loco/mx53loco.c | 6 +-
board/freescale/mx53smd/imximage.cfg | 6 +-
board/freescale/mx53smd/mx53smd.c | 4 +-
board/scb9328/scb9328.c | 2 +-
board/syteco/zmx25/zmx25.c | 35 ++++------
board/ttcontrol/vision2/vision2.c | 71
++++++++------------
doc/README.imx5 | 17 +++++
drivers/gpio/mxc_gpio.c | 51 +++++++++++++-
drivers/spi/mxc_spi.c | 8 +-
include/configs/imx31_litekit.h | 1 +
include/configs/mx31ads.h | 1 +
include/configs/mx35pdk.h | 7 +-
include/configs/mx51evk.h | 1 +
33 files changed, 383 insertions(+), 239 deletions(-)
rename include/mxc_gpio.h => arch/arm/include/asm/arch-mx25/gpio.h (59%)
create mode 100644 arch/arm/include/asm/arch-mx31/gpio.h
create mode 100644 arch/arm/include/asm/arch-mx35/gpio.h
create mode 100644 arch/arm/include/asm/arch-mx5/gpio.h
create mode 100644 doc/README.imx5
Thanks,
Stefano
--
=====================================================================
DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: +49-8142-66989-0 Fax: +49-8142-66989-80 Email: office at denx.de
=====================================================================
^ permalink raw reply [flat|nested] 116+ messages in thread
* [U-Boot] [GIT PULL] Pull request: u-boot-imx
2011-08-26 9:31 Stefano Babic
@ 2011-08-26 9:38 ` Stefano Babic
0 siblings, 0 replies; 116+ messages in thread
From: Stefano Babic @ 2011-08-26 9:38 UTC (permalink / raw)
To: u-boot
On 08/26/2011 11:31 AM, Stefano Babic wrote:
> Hi Albert,
>
Please do not apply my last pull request. It was sent errouneosly too
fast....
Stefano
--
=====================================================================
DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: +49-8142-66989-0 Fax: +49-8142-66989-80 Email: office at denx.de
=====================================================================
^ permalink raw reply [flat|nested] 116+ messages in thread
* [U-Boot] [GIT PULL] Pull request: u-boot-imx
@ 2011-08-26 9:31 Stefano Babic
2011-08-26 9:38 ` Stefano Babic
0 siblings, 1 reply; 116+ messages in thread
From: Stefano Babic @ 2011-08-26 9:31 UTC (permalink / raw)
To: u-boot
Hi Albert,
please pull from u-boot-imx:
The following changes since commit 5557e86bb0793012057d5462976c2a902bc629ac:
omap4: increase SRAM budget to fix build error (2011-08-21 10:14:51 +0200)
are available in the git repository at:
git://www.denx.de/git/u-boot-imx.git master
David Jander (1):
ARM: MX51: PLL errata workaround
Fabio Estevam (1):
mx53: ddr3: Update DD3 initialization
Stefano Babic (17):
MX35: MX35PDK: support additional RAM on CSD1
MX: MX35 / MX5: uniform clock command with powerpc
IMX: uniform GPIO interface using GPIO framework
MX25: make use of GPIO framework for MX25 processor
MX31: make use of GPIO framework for MX31 processor
MX5: make use of GPIO framework for MX5 processor
MX35: make use of GPIO framework for MX35 processor
MX31: QONG: make use of GPIO framework
MX5: efikamx: make use of GPIO framework
MX25: zmx25: make use of GPIO framework
MX5: mx53ard: make use of GPIO framework
MX5: mx53smd: make use of GPIO framework
MX5: vision2: make use of GPIO framework
MX5: mx53evk: make use of GPIO framework
MX5: mx53loco: make use of GPIO framework
MX35: mx35pdk: make use of GPIO framework
MX5: mx51evk: make use of GPIO framework
arch/arm/cpu/arm1136/mx35/generic.c | 4 +-
arch/arm/cpu/armv7/mx5/clock.c | 4 +-
arch/arm/cpu/armv7/mx5/lowlevel_init.S | 38 +++++++++++
.../arm/include/asm/arch-mx25/gpio.h | 42 ++++--------
arch/arm/include/asm/arch-mx25/imx-regs.h | 12 ---
arch/arm/include/asm/arch-mx31/gpio.h | 35 ++++++++++
arch/arm/include/asm/arch-mx31/imx-regs.h | 7 --
arch/arm/include/asm/arch-mx35/gpio.h | 40 +++++++++++
arch/arm/include/asm/arch-mx5/gpio.h | 35 ++++++++++
arch/arm/include/asm/arch-mx5/imx-regs.h | 12 ++--
board/davedenx/qong/fpga.c | 10 ++--
board/davedenx/qong/qong.c | 36 +++++-----
board/efikamx/efikamx.c | 62
+++++++-----------
board/freescale/mx35pdk/lowlevel_init.S | 9 ++-
board/freescale/mx35pdk/mx35pdk.c | 22 +++++--
board/freescale/mx51evk/mx51evk.c | 18 ++----
board/freescale/mx53ard/imximage_dd3.cfg | 6 +-
board/freescale/mx53ard/mx53ard.c | 8 +-
board/freescale/mx53evk/mx53evk.c | 6 +-
board/freescale/mx53loco/imximage.cfg | 6 +-
board/freescale/mx53loco/mx53loco.c | 6 +-
board/freescale/mx53smd/imximage.cfg | 6 +-
board/freescale/mx53smd/mx53smd.c | 4 +-
board/syteco/zmx25/zmx25.c | 35 ++++------
board/ttcontrol/vision2/vision2.c | 71
++++++++------------
doc/README.imx5 | 17 +++++
drivers/gpio/mxc_gpio.c | 51 +++++++++++++-
drivers/spi/mxc_spi.c | 8 +-
include/configs/mx35pdk.h | 7 +-
include/configs/mx51evk.h | 1 +
30 files changed, 380 insertions(+), 238 deletions(-)
rename include/mxc_gpio.h => arch/arm/include/asm/arch-mx25/gpio.h (59%)
create mode 100644 arch/arm/include/asm/arch-mx31/gpio.h
create mode 100644 arch/arm/include/asm/arch-mx35/gpio.h
create mode 100644 arch/arm/include/asm/arch-mx5/gpio.h
create mode 100644 doc/README.imx5
Thanks,
Stefano
--
=====================================================================
DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: +49-8142-66989-0 Fax: +49-8142-66989-80 Email: office at denx.de
=====================================================================
^ permalink raw reply [flat|nested] 116+ messages in thread
* [U-Boot] [GIT PULL] Pull request: u-boot-imx
2011-08-12 14:08 Stefano Babic
@ 2011-08-12 17:53 ` Albert ARIBAUD
0 siblings, 0 replies; 116+ messages in thread
From: Albert ARIBAUD @ 2011-08-12 17:53 UTC (permalink / raw)
To: u-boot
Hi Stefano,
Le 12/08/2011 16:08, Stefano Babic a ?crit :
> Hi Albert,
>
> please pull from u-boot-imx (rebased on your current u-boot-arm):
>
> The following changes since commit ee9cb9fc8922b223f8029259e84f56d06d8c8b3b:
>
> integrator: convert to new build system (2011-08-12 14:29:15 +0200)
>
> are available in the git repository at:
> git://www.denx.de/git/u-boot-imx.git master
>
> Jason Liu (1):
> mx5: Remove CONFIG_L2_OFF and CONFIG_SYS_L2CACHE_OFF
>
> Stefano Babic (1):
> MX31: removed warnings due to clock.h
>
> arch/arm/include/asm/arch-mx31/clock.h | 2 +-
> include/configs/efikamx.h | 2 --
> include/configs/mx51evk.h | 2 --
> include/configs/mx53ard.h | 2 --
> include/configs/mx53evk.h | 2 --
> include/configs/mx53loco.h | 2 --
> include/configs/mx53smd.h | 2 --
> include/configs/vision2.h | 1 -
> 8 files changed, 1 insertions(+), 14 deletions(-)
>
> Stefano
Applied tu u-boot-arm/master, thanks!
Amicalement,
--
Albert.
^ permalink raw reply [flat|nested] 116+ messages in thread
* [U-Boot] [GIT PULL] Pull request: u-boot-imx
@ 2011-08-12 14:08 Stefano Babic
2011-08-12 17:53 ` Albert ARIBAUD
0 siblings, 1 reply; 116+ messages in thread
From: Stefano Babic @ 2011-08-12 14:08 UTC (permalink / raw)
To: u-boot
Hi Albert,
please pull from u-boot-imx (rebased on your current u-boot-arm):
The following changes since commit ee9cb9fc8922b223f8029259e84f56d06d8c8b3b:
integrator: convert to new build system (2011-08-12 14:29:15 +0200)
are available in the git repository at:
git://www.denx.de/git/u-boot-imx.git master
Jason Liu (1):
mx5: Remove CONFIG_L2_OFF and CONFIG_SYS_L2CACHE_OFF
Stefano Babic (1):
MX31: removed warnings due to clock.h
arch/arm/include/asm/arch-mx31/clock.h | 2 +-
include/configs/efikamx.h | 2 --
include/configs/mx51evk.h | 2 --
include/configs/mx53ard.h | 2 --
include/configs/mx53evk.h | 2 --
include/configs/mx53loco.h | 2 --
include/configs/mx53smd.h | 2 --
include/configs/vision2.h | 1 -
8 files changed, 1 insertions(+), 14 deletions(-)
Stefano
--
=====================================================================
DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: +49-8142-66989-0 Fax: +49-8142-66989-80 Email: office at denx.de
=====================================================================
^ permalink raw reply [flat|nested] 116+ messages in thread
* [U-Boot] [GIT PULL] Pull request: u-boot-imx
2011-07-18 12:45 Stefano Babic
@ 2011-07-18 13:38 ` Albert ARIBAUD
0 siblings, 0 replies; 116+ messages in thread
From: Albert ARIBAUD @ 2011-07-18 13:38 UTC (permalink / raw)
To: u-boot
Hi Stefano,
Le 18/07/2011 14:45, Stefano Babic a ?crit :
> Hi Albert,
>
> please pull from u-boot-imx.
>
> The following changes since commit 49473adabff703d0784f1f7457f29bde0a4893d1:
>
> am3517evm: change console device from ttyS2 to ttyO2 (2011-07-18
> 12:35:52 +0200)
>
> are available in the git repository at:
> git://www.denx.de/git/u-boot-imx.git master
>
> David Jander (1):
> ARM: MX5: Fix broken leftover TO-2 errata workaround
>
> Stefano Babic (1):
> MX31: Cleanup clock function
>
> Torsten Koschorrek (1):
> scb9328: Add ARM relocation support
>
> arch/arm/cpu/arm1136/mx31/generic.c | 21 ++++++++++++++++++++-
> arch/arm/cpu/armv7/mx5/lowlevel_init.S | 6 +++++-
> arch/arm/include/asm/arch-mx31/clock.h | 11 +++++++++--
> board/scb9328/config.mk | 10 ----------
> board/scb9328/scb9328.c | 24 +++++++++---------------
> drivers/spi/mxc_spi.c | 2 --
> include/configs/scb9328.h | 5 +++++
> 7 files changed, 48 insertions(+), 31 deletions(-)
> delete mode 100644 board/scb9328/config.mk
Applied to u-boot-arm/master, thanks!
Amicalement,
--
Albert.
^ permalink raw reply [flat|nested] 116+ messages in thread
* [U-Boot] [GIT PULL] Pull request: u-boot-imx
@ 2011-07-18 12:45 Stefano Babic
2011-07-18 13:38 ` Albert ARIBAUD
0 siblings, 1 reply; 116+ messages in thread
From: Stefano Babic @ 2011-07-18 12:45 UTC (permalink / raw)
To: u-boot
Hi Albert,
please pull from u-boot-imx.
The following changes since commit 49473adabff703d0784f1f7457f29bde0a4893d1:
am3517evm: change console device from ttyS2 to ttyO2 (2011-07-18
12:35:52 +0200)
are available in the git repository at:
git://www.denx.de/git/u-boot-imx.git master
David Jander (1):
ARM: MX5: Fix broken leftover TO-2 errata workaround
Stefano Babic (1):
MX31: Cleanup clock function
Torsten Koschorrek (1):
scb9328: Add ARM relocation support
arch/arm/cpu/arm1136/mx31/generic.c | 21 ++++++++++++++++++++-
arch/arm/cpu/armv7/mx5/lowlevel_init.S | 6 +++++-
arch/arm/include/asm/arch-mx31/clock.h | 11 +++++++++--
board/scb9328/config.mk | 10 ----------
board/scb9328/scb9328.c | 24 +++++++++---------------
drivers/spi/mxc_spi.c | 2 --
include/configs/scb9328.h | 5 +++++
7 files changed, 48 insertions(+), 31 deletions(-)
delete mode 100644 board/scb9328/config.mk
Thanks,
Stefano
--
=====================================================================
DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: +49-8142-66989-0 Fax: +49-8142-66989-80 Email: office at denx.de
=====================================================================
^ permalink raw reply [flat|nested] 116+ messages in thread
* [U-Boot] [GIT PULL] Pull request: u-boot-imx
2011-07-13 14:25 Stefano Babic
@ 2011-07-14 13:42 ` Albert ARIBAUD
0 siblings, 0 replies; 116+ messages in thread
From: Albert ARIBAUD @ 2011-07-14 13:42 UTC (permalink / raw)
To: u-boot
Hi Stefano,
Le 13/07/2011 16:25, Stefano Babic a ?crit :
> Hi Albert,
>
> please pull from u-boot-imx.
>
> The following changes since commit 79642098a8345e2506ab0ff02e8c7ac4da405d0c:
>
> Add support for Network Space v2 and parents (2011-07-04 10:55:28 +0200)
>
> are available in the git repository at:
> git://www.denx.de/git/u-boot-imx.git master
>
> Fabio Estevam (2):
> mx31pdk: cosmetic: Fix line over 80 characters
> mx27: Make the UART port number explicit
>
> Jana Rapava (2):
> EfikaMX: Use correct imximage.cfg
> EfikaMX: Add missing CONFIG_SYS_TEXT_BASE
>
> Marek Vasut (1):
> EfikaMX: Enable EXT2 booting
>
> Matthias Weisser (7):
> build: Add targets for auto gen of asm-offsets.h and use it in imx35
> imx: Add get_tbclk() function for imx25
> imx: Use correct imx25 reset.c
> imx: Add support for USB EHCI on imx25
> imx: Add auto generation of asm-offsets.h for imx25
> imx: Make imx25 compatible to mxc_gpio driver and fix in tx25
> imx: Add support for zmx25 board
>
> Stefano Babic (2):
> MX5: Update to autogenerated asm-offsets.h
> MX27: Update to autogenerated asm-offsets.h
>
> Torsten Koschorrek (1):
> ARM: Update maintainer of board scb9328
>
> MAINTAINERS | 7 +-
> arch/arm/cpu/arm1136/mx35/Makefile | 11 --
> arch/arm/cpu/arm926ejs/mx25/Makefile | 8 +-
> arch/arm/cpu/arm926ejs/mx25/asm-offsets.c | 60 ++++++++
> arch/arm/cpu/arm926ejs/mx25/timer.c | 12 ++
> arch/arm/cpu/arm926ejs/mx27/Makefile | 2 +
> arch/arm/cpu/arm926ejs/mx27/asm-offsets.c | 45 ++++++
> arch/arm/cpu/arm926ejs/mx27/generic.c | 2 +-
> arch/arm/cpu/armv7/mx5/Makefile | 2 +
> arch/arm/cpu/armv7/mx5/asm-offsets.c | 76 ++++++++++
> arch/arm/include/asm/arch-mx25/imx-regs.h | 49 ++++++-
> arch/arm/include/asm/arch-mx25/macro.h | 64 ++++++++
> arch/arm/include/asm/arch-mx27/asm-offsets.h | 16 --
> arch/arm/include/asm/arch-mx27/imx-regs.h | 2 +-
> arch/arm/include/asm/arch-mx31/imx-regs.h | 2 +-
> arch/arm/include/asm/arch-mx5/asm-offsets.h | 55 -------
> arch/arm/include/asm/arch-mx5/imx-regs.h | 18 +++
> board/karo/tx25/tx25.c | 26 ++--
> board/logicpd/imx27lite/imx27lite.c | 2 +-
> board/syteco/zmx25/Makefile | 51 +++++++
> board/syteco/zmx25/lowlevel_init.S | 110 ++++++++++++++
> board/syteco/zmx25/zmx25.c | 203
> ++++++++++++++++++++++++++
> boards.cfg | 3 +-
> drivers/usb/host/ehci-mxc.c | 33 +++-
> include/configs/efikamx.h | 3 +
> include/configs/mx31pdk.h | 6 +-
> include/configs/zmx25.h | 180 +++++++++++++++++++++++
> include/mxc_gpio.h | 5 +
> rules.mk | 10 ++
> 29 files changed, 944 insertions(+), 119 deletions(-)
> create mode 100644 arch/arm/cpu/arm926ejs/mx25/asm-offsets.c
> create mode 100644 arch/arm/cpu/arm926ejs/mx27/asm-offsets.c
> create mode 100644 arch/arm/cpu/armv7/mx5/asm-offsets.c
> create mode 100644 arch/arm/include/asm/arch-mx25/macro.h
> delete mode 100644 arch/arm/include/asm/arch-mx27/asm-offsets.h
> delete mode 100644 arch/arm/include/asm/arch-mx5/asm-offsets.h
> create mode 100644 board/syteco/zmx25/Makefile
> create mode 100644 board/syteco/zmx25/lowlevel_init.S
> create mode 100644 board/syteco/zmx25/zmx25.c
> create mode 100644 include/configs/zmx25.h
Applied to u-boot-arm/master, thanks.
> Best regards,
> Stefano Babic
Amicalement,
--
Albert.
^ permalink raw reply [flat|nested] 116+ messages in thread
* [U-Boot] [GIT PULL] Pull request: u-boot-imx
@ 2011-07-13 14:25 Stefano Babic
2011-07-14 13:42 ` Albert ARIBAUD
0 siblings, 1 reply; 116+ messages in thread
From: Stefano Babic @ 2011-07-13 14:25 UTC (permalink / raw)
To: u-boot
Hi Albert,
please pull from u-boot-imx.
The following changes since commit 79642098a8345e2506ab0ff02e8c7ac4da405d0c:
Add support for Network Space v2 and parents (2011-07-04 10:55:28 +0200)
are available in the git repository at:
git://www.denx.de/git/u-boot-imx.git master
Fabio Estevam (2):
mx31pdk: cosmetic: Fix line over 80 characters
mx27: Make the UART port number explicit
Jana Rapava (2):
EfikaMX: Use correct imximage.cfg
EfikaMX: Add missing CONFIG_SYS_TEXT_BASE
Marek Vasut (1):
EfikaMX: Enable EXT2 booting
Matthias Weisser (7):
build: Add targets for auto gen of asm-offsets.h and use it in imx35
imx: Add get_tbclk() function for imx25
imx: Use correct imx25 reset.c
imx: Add support for USB EHCI on imx25
imx: Add auto generation of asm-offsets.h for imx25
imx: Make imx25 compatible to mxc_gpio driver and fix in tx25
imx: Add support for zmx25 board
Stefano Babic (2):
MX5: Update to autogenerated asm-offsets.h
MX27: Update to autogenerated asm-offsets.h
Torsten Koschorrek (1):
ARM: Update maintainer of board scb9328
MAINTAINERS | 7 +-
arch/arm/cpu/arm1136/mx35/Makefile | 11 --
arch/arm/cpu/arm926ejs/mx25/Makefile | 8 +-
arch/arm/cpu/arm926ejs/mx25/asm-offsets.c | 60 ++++++++
arch/arm/cpu/arm926ejs/mx25/timer.c | 12 ++
arch/arm/cpu/arm926ejs/mx27/Makefile | 2 +
arch/arm/cpu/arm926ejs/mx27/asm-offsets.c | 45 ++++++
arch/arm/cpu/arm926ejs/mx27/generic.c | 2 +-
arch/arm/cpu/armv7/mx5/Makefile | 2 +
arch/arm/cpu/armv7/mx5/asm-offsets.c | 76 ++++++++++
arch/arm/include/asm/arch-mx25/imx-regs.h | 49 ++++++-
arch/arm/include/asm/arch-mx25/macro.h | 64 ++++++++
arch/arm/include/asm/arch-mx27/asm-offsets.h | 16 --
arch/arm/include/asm/arch-mx27/imx-regs.h | 2 +-
arch/arm/include/asm/arch-mx31/imx-regs.h | 2 +-
arch/arm/include/asm/arch-mx5/asm-offsets.h | 55 -------
arch/arm/include/asm/arch-mx5/imx-regs.h | 18 +++
board/karo/tx25/tx25.c | 26 ++--
board/logicpd/imx27lite/imx27lite.c | 2 +-
board/syteco/zmx25/Makefile | 51 +++++++
board/syteco/zmx25/lowlevel_init.S | 110 ++++++++++++++
board/syteco/zmx25/zmx25.c | 203
++++++++++++++++++++++++++
boards.cfg | 3 +-
drivers/usb/host/ehci-mxc.c | 33 +++-
include/configs/efikamx.h | 3 +
include/configs/mx31pdk.h | 6 +-
include/configs/zmx25.h | 180 +++++++++++++++++++++++
include/mxc_gpio.h | 5 +
rules.mk | 10 ++
29 files changed, 944 insertions(+), 119 deletions(-)
create mode 100644 arch/arm/cpu/arm926ejs/mx25/asm-offsets.c
create mode 100644 arch/arm/cpu/arm926ejs/mx27/asm-offsets.c
create mode 100644 arch/arm/cpu/armv7/mx5/asm-offsets.c
create mode 100644 arch/arm/include/asm/arch-mx25/macro.h
delete mode 100644 arch/arm/include/asm/arch-mx27/asm-offsets.h
delete mode 100644 arch/arm/include/asm/arch-mx5/asm-offsets.h
create mode 100644 board/syteco/zmx25/Makefile
create mode 100644 board/syteco/zmx25/lowlevel_init.S
create mode 100644 board/syteco/zmx25/zmx25.c
create mode 100644 include/configs/zmx25.h
Best regards,
Stefano Babic
--
=====================================================================
DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: +49-8142-66989-0 Fax: +49-8142-66989-80 Email: office at denx.de
=====================================================================
^ permalink raw reply [flat|nested] 116+ messages in thread
* [U-Boot] [GIT PULL] Pull request: u-boot-imx
2011-06-18 9:59 ` Stefano Babic
@ 2011-06-18 11:11 ` Albert ARIBAUD
0 siblings, 0 replies; 116+ messages in thread
From: Albert ARIBAUD @ 2011-06-18 11:11 UTC (permalink / raw)
To: u-boot
Hi Stefano,
Le 18/06/2011 11:59, Stefano Babic a ?crit :
> On 06/17/2011 09:37 PM, Albert ARIBAUD wrote:
>> Hi again Stefano,
>
> Hi Albert,
>
>>
>> Update: actually, can you rebase on u-boot-arm/master as it is
>> currently, and submit your pull request now? I'll pull Marvell in later.
>
> Done.
>
> The following changes since commit 7b2fac7654f7420c2787f74ec3b1540fa3b343e9:
>
> omap730p2: fix build breaks (2011-06-09 08:54:57 -0400)
>
> are available in the git repository at:
> git://www.denx.de/git/u-boot-imx.git master
>
> Fabio Estevam (3):
> mx1ads: Fix build by using new relocation scheme
> imx31_phycore: Fix build by using new relocation scheme
> mx31pdk: Add DHCP command
>
> Helmut Raiger (1):
> mxc_spi.c: typo fixed
>
> Stefano Babic (1):
> MX31: QONG: drop config.mk
>
> board/davedenx/qong/config.mk | 3 ---
> board/imx31_phycore/config.mk | 1 -
> board/imx31_phycore/imx31_phycore.c | 20 +++++++++++++-------
> board/mx1ads/config.mk | 25 -------------------------
> board/mx1ads/mx1ads.c | 27 +++++++++++++++++++--------
> drivers/spi/mxc_spi.c | 2 +-
> include/configs/imx31_phycore.h | 12 ++++++++++++
> include/configs/mx1ads.h | 10 ++++++++++
> include/configs/mx31pdk.h | 1 +
> include/configs/qong.h | 4 +++-
> 10 files changed, 59 insertions(+), 46 deletions(-)
> delete mode 100644 board/davedenx/qong/config.mk
> delete mode 100644 board/imx31_phycore/config.mk
> delete mode 100644 board/mx1ads/config.mk
>
> Best regards,
> Stefano Babic
Thanks a lot! Applied to u-boot-arm/master.
Amicalement,
--
Albert.
^ permalink raw reply [flat|nested] 116+ messages in thread
* [U-Boot] [GIT PULL] Pull request: u-boot-imx
2011-06-17 19:37 ` Albert ARIBAUD
@ 2011-06-18 9:59 ` Stefano Babic
2011-06-18 11:11 ` Albert ARIBAUD
0 siblings, 1 reply; 116+ messages in thread
From: Stefano Babic @ 2011-06-18 9:59 UTC (permalink / raw)
To: u-boot
On 06/17/2011 09:37 PM, Albert ARIBAUD wrote:
> Hi again Stefano,
Hi Albert,
>
> Update: actually, can you rebase on u-boot-arm/master as it is
> currently, and submit your pull request now? I'll pull Marvell in later.
Done.
The following changes since commit 7b2fac7654f7420c2787f74ec3b1540fa3b343e9:
omap730p2: fix build breaks (2011-06-09 08:54:57 -0400)
are available in the git repository at:
git://www.denx.de/git/u-boot-imx.git master
Fabio Estevam (3):
mx1ads: Fix build by using new relocation scheme
imx31_phycore: Fix build by using new relocation scheme
mx31pdk: Add DHCP command
Helmut Raiger (1):
mxc_spi.c: typo fixed
Stefano Babic (1):
MX31: QONG: drop config.mk
board/davedenx/qong/config.mk | 3 ---
board/imx31_phycore/config.mk | 1 -
board/imx31_phycore/imx31_phycore.c | 20 +++++++++++++-------
board/mx1ads/config.mk | 25 -------------------------
board/mx1ads/mx1ads.c | 27 +++++++++++++++++++--------
drivers/spi/mxc_spi.c | 2 +-
include/configs/imx31_phycore.h | 12 ++++++++++++
include/configs/mx1ads.h | 10 ++++++++++
include/configs/mx31pdk.h | 1 +
include/configs/qong.h | 4 +++-
10 files changed, 59 insertions(+), 46 deletions(-)
delete mode 100644 board/davedenx/qong/config.mk
delete mode 100644 board/imx31_phycore/config.mk
delete mode 100644 board/mx1ads/config.mk
Best regards,
Stefano Babic
--
=====================================================================
DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: +49-8142-66989-0 Fax: +49-8142-66989-80 Email: office at denx.de
=====================================================================
^ permalink raw reply [flat|nested] 116+ messages in thread
* [U-Boot] [GIT PULL] Pull request: u-boot-imx
2011-06-17 19:24 ` Albert ARIBAUD
@ 2011-06-17 19:37 ` Albert ARIBAUD
2011-06-18 9:59 ` Stefano Babic
0 siblings, 1 reply; 116+ messages in thread
From: Albert ARIBAUD @ 2011-06-17 19:37 UTC (permalink / raw)
To: u-boot
Hi again Stefano,
Le 17/06/2011 21:24, Albert ARIBAUD a ?crit :
> Hi Stefano,
>
> Le 15/06/2011 11:28, Stefano Babic a ?crit :
>> Hi Albert,
>>
>> please pull from u-boot-imx. There are only fix for a couple of still
>> broken boards.
>>
>> The following changes since commit
>> 9571865e0d32b1bcf8a6625497d1cd5d4bbad354:
>>
>> Merge branch 'master' of git://git.denx.de/u-boot-arm (2011-06-08
>> 23:29:04 +0200)
>>
>> are available in the git repository at:
>>
>> git://www.denx.de/git/u-boot-imx.git master
>
> Your request is based on u-boot/master... Can you please resend a pull
> request based on u-boot-arm/master? Please wait until I have pulled in
> Prafulla's pull request then you can fetch u-boot-arm/master and rebase
> on it. Sorry for the delay.
Update: actually, can you rebase on u-boot-arm/master as it is
currently, and submit your pull request now? I'll pull Marvell in later.
Amicalement,
--
Albert.
^ permalink raw reply [flat|nested] 116+ messages in thread
* [U-Boot] [GIT PULL] Pull request: u-boot-imx
2011-06-15 9:28 Stefano Babic
@ 2011-06-17 19:24 ` Albert ARIBAUD
2011-06-17 19:37 ` Albert ARIBAUD
0 siblings, 1 reply; 116+ messages in thread
From: Albert ARIBAUD @ 2011-06-17 19:24 UTC (permalink / raw)
To: u-boot
Hi Stefano,
Le 15/06/2011 11:28, Stefano Babic a ?crit :
> Hi Albert,
>
> please pull from u-boot-imx. There are only fix for a couple of still
> broken boards.
>
> The following changes since commit 9571865e0d32b1bcf8a6625497d1cd5d4bbad354:
>
> Merge branch 'master' of git://git.denx.de/u-boot-arm (2011-06-08
> 23:29:04 +0200)
>
> are available in the git repository at:
>
> git://www.denx.de/git/u-boot-imx.git master
Your request is based on u-boot/master... Can you please resend a pull
request based on u-boot-arm/master? Please wait until I have pulled in
Prafulla's pull request then you can fetch u-boot-arm/master and rebase
on it. Sorry for the delay.
Amicalement,
--
Albert.
^ permalink raw reply [flat|nested] 116+ messages in thread
* [U-Boot] [GIT PULL] Pull request: u-boot-imx
@ 2011-06-15 9:28 Stefano Babic
2011-06-17 19:24 ` Albert ARIBAUD
0 siblings, 1 reply; 116+ messages in thread
From: Stefano Babic @ 2011-06-15 9:28 UTC (permalink / raw)
To: u-boot
Hi Albert,
please pull from u-boot-imx. There are only fix for a couple of still
broken boards.
The following changes since commit 9571865e0d32b1bcf8a6625497d1cd5d4bbad354:
Merge branch 'master' of git://git.denx.de/u-boot-arm (2011-06-08
23:29:04 +0200)
are available in the git repository at:
git://www.denx.de/git/u-boot-imx.git master
Fabio Estevam (2):
mx1ads: Fix build by using new relocation scheme
imx31_phycore: Fix build by using new relocation scheme
Stefano Babic (1):
MX31: QONG: drop config.mk
board/davedenx/qong/config.mk | 3 ---
board/imx31_phycore/config.mk | 1 -
board/imx31_phycore/imx31_phycore.c | 20 +++++++++++++-------
board/mx1ads/config.mk | 25 -------------------------
board/mx1ads/mx1ads.c | 27 +++++++++++++++++++--------
include/configs/imx31_phycore.h | 12 ++++++++++++
include/configs/mx1ads.h | 10 ++++++++++
include/configs/qong.h | 4 +++-
8 files changed, 57 insertions(+), 45 deletions(-)
delete mode 100644 board/davedenx/qong/config.mk
delete mode 100644 board/imx31_phycore/config.mk
delete mode 100644 board/mx1ads/config.mk
Thanks,
Stefano
--
=====================================================================
DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: +49-8142-66989-0 Fax: +49-8142-66989-80 Email: office at denx.de
=====================================================================
^ permalink raw reply [flat|nested] 116+ messages in thread
* [U-Boot] [GIT PULL] Pull request: u-boot-imx
2011-06-08 11:36 Stefano Babic
@ 2011-06-08 20:08 ` Albert ARIBAUD
0 siblings, 0 replies; 116+ messages in thread
From: Albert ARIBAUD @ 2011-06-08 20:08 UTC (permalink / raw)
To: u-boot
Hi Stefano,
Le 08/06/2011 13:36, Stefano Babic a ?crit :
> Hi Albert,
>
> please pull from u-boot-imx.
>
> The following changes since commit 6f4dd40cddbd69c56fec1285fee02cbd5a3833d8:
>
> Prepare v2011.06-rc2 (2011-06-02 23:19:27 +0200)
>
> are available in the git repository at:
> git://www.denx.de/git/u-boot-imx.git master
>
> Fabio Estevam (4):
> mx31ads: Use the new relocation scheme
> mx31litekit: Fix boot with the new relocation scheme.
> imx31_litekit: Remove local config.mk
> imx27lite: Remove local config.mk
>
> Felix Radensky (1):
> mx31ads: Fix environment location on flash
>
> board/freescale/mx31ads/config.mk | 1 -
> board/freescale/mx31ads/mx31ads.c | 19 +++++++++--
> board/freescale/mx31ads/u-boot.lds | 42
> +++++++++++++++++++++------
> board/logicpd/imx27lite/config.mk | 5 ---
> board/logicpd/imx31_litekit/config.mk | 1 -
> board/logicpd/imx31_litekit/imx31_litekit.c | 17 +++++++----
> include/configs/imx27lite-common.h | 2 +
> include/configs/imx31_litekit.h | 3 ++
> include/configs/mx31ads.h | 21 +++++++++----
> 9 files changed, 78 insertions(+), 33 deletions(-)
> delete mode 100644 board/freescale/mx31ads/config.mk
> delete mode 100644 board/logicpd/imx27lite/config.mk
> delete mode 100644 board/logicpd/imx31_litekit/config.mk
>
> Thanks,
> Stefano
Applied, thanks!
Amicalement,
--
Albert.
^ permalink raw reply [flat|nested] 116+ messages in thread
* [U-Boot] [GIT PULL] Pull request: u-boot-imx
@ 2011-06-08 11:36 Stefano Babic
2011-06-08 20:08 ` Albert ARIBAUD
0 siblings, 1 reply; 116+ messages in thread
From: Stefano Babic @ 2011-06-08 11:36 UTC (permalink / raw)
To: u-boot
Hi Albert,
please pull from u-boot-imx.
The following changes since commit 6f4dd40cddbd69c56fec1285fee02cbd5a3833d8:
Prepare v2011.06-rc2 (2011-06-02 23:19:27 +0200)
are available in the git repository at:
git://www.denx.de/git/u-boot-imx.git master
Fabio Estevam (4):
mx31ads: Use the new relocation scheme
mx31litekit: Fix boot with the new relocation scheme.
imx31_litekit: Remove local config.mk
imx27lite: Remove local config.mk
Felix Radensky (1):
mx31ads: Fix environment location on flash
board/freescale/mx31ads/config.mk | 1 -
board/freescale/mx31ads/mx31ads.c | 19 +++++++++--
board/freescale/mx31ads/u-boot.lds | 42
+++++++++++++++++++++------
board/logicpd/imx27lite/config.mk | 5 ---
board/logicpd/imx31_litekit/config.mk | 1 -
board/logicpd/imx31_litekit/imx31_litekit.c | 17 +++++++----
include/configs/imx27lite-common.h | 2 +
include/configs/imx31_litekit.h | 3 ++
include/configs/mx31ads.h | 21 +++++++++----
9 files changed, 78 insertions(+), 33 deletions(-)
delete mode 100644 board/freescale/mx31ads/config.mk
delete mode 100644 board/logicpd/imx27lite/config.mk
delete mode 100644 board/logicpd/imx31_litekit/config.mk
Thanks,
Stefano
--
=====================================================================
DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: +49-8142-66989-0 Fax: +49-8142-66989-80 Email: office at denx.de
=====================================================================
^ permalink raw reply [flat|nested] 116+ messages in thread
* [U-Boot] [GIT PULL] Pull request: u-boot-imx
2011-05-20 15:58 Stefano Babic
@ 2011-05-20 18:35 ` Albert ARIBAUD
0 siblings, 0 replies; 116+ messages in thread
From: Albert ARIBAUD @ 2011-05-20 18:35 UTC (permalink / raw)
To: u-boot
Hi Stefano,
Le 20/05/2011 17:58, Stefano Babic a ?crit :
> Hi Albert,
>
> please pull from u-boot-imx.
>
> The following changes since commit 7a82c208143bbc774ffcb4e53239410f867a0794:
>
> Prepare v2011.06-rc1 (2011-05-19 22:23:50 +0200)
>
> are available in the git repository at:
> git://www.denx.de/git/u-boot-imx.git master
>
> Fabio Estevam (6):
> mx31pdk: Clean up mx31pdk.h file
> MX53: Add initial support for MX53SMD board.
> MX51: vision: Let video mode struct be independant of watchdog.
> MX51: vision2: Fix build for vision2 board.
> MX53: Handle silicon revision 2.1 case
> MX53: Remove CONFIG_SYS_BOOTMAPSZ from mx53 config files.
>
> Jason Liu (2):
> MX53: support for freescale MX53LOCO board
> mx5: board: code clean up for checkboard code
>
> Shawn Guo (2):
> mx5: Remove unnecessary CONFIG_SYS_BOOTMAPSZ definition
> mx5: Fix CONFIG_OF_LIBFDT redefined warning
>
> Stefano Babic (3):
> MX31: Make get_reset_cause() static and drop unreachable code
> MX5: drop config.mk from efikamx board
> MX31: drop warnings due to missing prototype for mxc_watchdog_reset()
>
> MAINTAINERS | 2 +
> arch/arm/cpu/arm1136/mx31/generic.c | 6 +-
> arch/arm/cpu/armv7/mx5/soc.c | 10 +-
> arch/arm/include/asm/arch-mx31/clock.h | 1 +
> board/efikamx/efikamx.c | 42 +---
> board/freescale/mx51evk/mx51evk.c | 36 +---
> board/freescale/mx53evk/mx53evk.c | 21 +--
> .../config.mk => freescale/mx53loco/Makefile} | 36 ++-
> board/freescale/mx53loco/imximage.cfg | 96 ++++++
> board/freescale/mx53loco/mx53loco.c | 302
> ++++++++++++++++++++
> .../config.mk => freescale/mx53smd/Makefile} | 35 ++-
> board/freescale/mx53smd/imximage.cfg | 96 ++++++
> board/freescale/mx53smd/mx53smd.c | 229 +++++++++++++++
> board/ttcontrol/vision2/vision2.c | 47 +---
> boards.cfg | 6 +-
> include/configs/mx31pdk.h | 32 +-
> include/configs/mx51evk.h | 3 -
> include/configs/mx53evk.h | 3 -
> include/configs/mx53loco.h | 185 ++++++++++++
> include/configs/mx53smd.h | 191 ++++++++++++
> include/configs/vision2.h | 1 +
> 21 files changed, 1191 insertions(+), 189 deletions(-)
> rename board/{efikamx/config.mk => freescale/mx53loco/Makefile} (51%)
> create mode 100644 board/freescale/mx53loco/imximage.cfg
> create mode 100644 board/freescale/mx53loco/mx53loco.c
> rename board/{ttcontrol/vision2/config.mk =>
> freescale/mx53smd/Makefile} (50%)
> create mode 100644 board/freescale/mx53smd/imximage.cfg
> create mode 100644 board/freescale/mx53smd/mx53smd.c
> create mode 100644 include/configs/mx53loco.h
> create mode 100644 include/configs/mx53smd.h
>
> Best regards,
> Stefano
Applied, thanks.
Amicalement,
--
Albert.
^ permalink raw reply [flat|nested] 116+ messages in thread
* [U-Boot] [GIT PULL] Pull request: u-boot-imx
@ 2011-05-20 15:58 Stefano Babic
2011-05-20 18:35 ` Albert ARIBAUD
0 siblings, 1 reply; 116+ messages in thread
From: Stefano Babic @ 2011-05-20 15:58 UTC (permalink / raw)
To: u-boot
Hi Albert,
please pull from u-boot-imx.
The following changes since commit 7a82c208143bbc774ffcb4e53239410f867a0794:
Prepare v2011.06-rc1 (2011-05-19 22:23:50 +0200)
are available in the git repository at:
git://www.denx.de/git/u-boot-imx.git master
Fabio Estevam (6):
mx31pdk: Clean up mx31pdk.h file
MX53: Add initial support for MX53SMD board.
MX51: vision: Let video mode struct be independant of watchdog.
MX51: vision2: Fix build for vision2 board.
MX53: Handle silicon revision 2.1 case
MX53: Remove CONFIG_SYS_BOOTMAPSZ from mx53 config files.
Jason Liu (2):
MX53: support for freescale MX53LOCO board
mx5: board: code clean up for checkboard code
Shawn Guo (2):
mx5: Remove unnecessary CONFIG_SYS_BOOTMAPSZ definition
mx5: Fix CONFIG_OF_LIBFDT redefined warning
Stefano Babic (3):
MX31: Make get_reset_cause() static and drop unreachable code
MX5: drop config.mk from efikamx board
MX31: drop warnings due to missing prototype for mxc_watchdog_reset()
MAINTAINERS | 2 +
arch/arm/cpu/arm1136/mx31/generic.c | 6 +-
arch/arm/cpu/armv7/mx5/soc.c | 10 +-
arch/arm/include/asm/arch-mx31/clock.h | 1 +
board/efikamx/efikamx.c | 42 +---
board/freescale/mx51evk/mx51evk.c | 36 +---
board/freescale/mx53evk/mx53evk.c | 21 +--
.../config.mk => freescale/mx53loco/Makefile} | 36 ++-
board/freescale/mx53loco/imximage.cfg | 96 ++++++
board/freescale/mx53loco/mx53loco.c | 302
++++++++++++++++++++
.../config.mk => freescale/mx53smd/Makefile} | 35 ++-
board/freescale/mx53smd/imximage.cfg | 96 ++++++
board/freescale/mx53smd/mx53smd.c | 229 +++++++++++++++
board/ttcontrol/vision2/vision2.c | 47 +---
boards.cfg | 6 +-
include/configs/mx31pdk.h | 32 +-
include/configs/mx51evk.h | 3 -
include/configs/mx53evk.h | 3 -
include/configs/mx53loco.h | 185 ++++++++++++
include/configs/mx53smd.h | 191 ++++++++++++
include/configs/vision2.h | 1 +
21 files changed, 1191 insertions(+), 189 deletions(-)
rename board/{efikamx/config.mk => freescale/mx53loco/Makefile} (51%)
create mode 100644 board/freescale/mx53loco/imximage.cfg
create mode 100644 board/freescale/mx53loco/mx53loco.c
rename board/{ttcontrol/vision2/config.mk =>
freescale/mx53smd/Makefile} (50%)
create mode 100644 board/freescale/mx53smd/imximage.cfg
create mode 100644 board/freescale/mx53smd/mx53smd.c
create mode 100644 include/configs/mx53loco.h
create mode 100644 include/configs/mx53smd.h
Best regards,
Stefano
--
=====================================================================
DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: +49-8142-66989-0 Fax: +49-8142-66989-80 Email: office at denx.de
=====================================================================
^ permalink raw reply [flat|nested] 116+ messages in thread
* [U-Boot] [GIT PULL] Pull request: u-boot-imx
2011-05-09 11:49 Stefano Babic
2011-05-10 21:55 ` Albert ARIBAUD
@ 2011-05-11 20:58 ` Albert ARIBAUD
1 sibling, 0 replies; 116+ messages in thread
From: Albert ARIBAUD @ 2011-05-11 20:58 UTC (permalink / raw)
To: u-boot
Hi Stefano,
Le 09/05/2011 13:49, Stefano Babic a ?crit :
> Hi Albert,
>
> please pull from u-boot-imx.
>
> The following changes since commit 96d04c3150ae9284500aef48803d7d132968f2b2:
>
> IDE: fix compiler warnings (2011-04-30 23:29:55 +0200)
>
> are available in the git repository at:
> git://www.denx.de/git/u-boot-imx.git master
>
> Fabio Estevam (2):
> MX31: mx31pdk: Add watchdog support
> gpio: imx: Fix return value on error
>
> Stefano Babic (2):
> MX31: removed warning due to missing prototype
> MX31: change return value of get_cpu_rev
>
> arch/arm/cpu/arm1136/mx31/generic.c | 31
> ++++++++++++++++------------
> arch/arm/include/asm/arch-mx31/clock.h | 1 +
> arch/arm/include/asm/arch-mx31/imx-regs.h | 2 +-
> board/freescale/mx31pdk/mx31pdk.c | 16 +++++++++++++++
> drivers/gpio/mxc_gpio.c | 5 ++-
> include/configs/mx31pdk.h | 3 ++
> 6 files changed, 42 insertions(+), 16 deletions(-)
Applied, thanks.
> Best regards,
> Stefano Babic
Amicalement,
--
Albert.
^ permalink raw reply [flat|nested] 116+ messages in thread
* [U-Boot] [GIT PULL] Pull request: u-boot-imx
2011-05-11 5:50 ` Stefano Babic
@ 2011-05-11 20:56 ` Albert ARIBAUD
0 siblings, 0 replies; 116+ messages in thread
From: Albert ARIBAUD @ 2011-05-11 20:56 UTC (permalink / raw)
To: u-boot
Hi Stefano,
Le 11/05/2011 07:50, Stefano Babic a ?crit :
> Sorry, my fault. I have already added a further patch to the master
> branch, instead of using my "next" as I am used to until you merge my
> master into u-boot-arm. It shoould be OK now.
It is, thanks.
> Best regards,
> Stefano
Amicalement,
--
Albert.
^ permalink raw reply [flat|nested] 116+ messages in thread
* [U-Boot] [GIT PULL] Pull request: u-boot-imx
2011-05-10 21:55 ` Albert ARIBAUD
@ 2011-05-11 5:50 ` Stefano Babic
2011-05-11 20:56 ` Albert ARIBAUD
0 siblings, 1 reply; 116+ messages in thread
From: Stefano Babic @ 2011-05-11 5:50 UTC (permalink / raw)
To: u-boot
On 05/10/2011 11:55 PM, Albert ARIBAUD wrote:
> Le 09/05/2011 13:49, Stefano Babic a ?crit :
>> Hi Albert,
>>
Hi Albert,
>> please pull from u-boot-imx.
>>
>> The following changes since commit
>> 96d04c3150ae9284500aef48803d7d132968f2b2:
>>
>> IDE: fix compiler warnings (2011-04-30 23:29:55 +0200)
>>
>> are available in the git repository at:
>> git://www.denx.de/git/u-boot-imx.git master
>>
>> Fabio Estevam (2):
>> MX31: mx31pdk: Add watchdog support
>> gpio: imx: Fix return value on error
>>
>> Stefano Babic (2):
>> MX31: removed warning due to missing prototype
>> MX31: change return value of get_cpu_rev
>
> Hi Stefano,
>
> This is weird: if I 'git fetch' your repo, I don't get a new master
> branch from it (previous fetch was when you sent out your previous pull
> request. The master I see from you is at "mx31pdk: Clean up mx31pdk.h
> file" (97ed77ba9c12158860b6a94caaa60df437588973), which is not in the
> list above. Can you double-check?
Sorry, my fault. I have already added a further patch to the master
branch, instead of using my "next" as I am used to until you merge my
master into u-boot-arm. It shoould be OK now.
Best regards,
Stefano
--
=====================================================================
DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: +49-8142-66989-0 Fax: +49-8142-66989-80 Email: office at denx.de
=====================================================================
^ permalink raw reply [flat|nested] 116+ messages in thread
* [U-Boot] [GIT PULL] Pull request: u-boot-imx
2011-05-09 11:49 Stefano Babic
@ 2011-05-10 21:55 ` Albert ARIBAUD
2011-05-11 5:50 ` Stefano Babic
2011-05-11 20:58 ` Albert ARIBAUD
1 sibling, 1 reply; 116+ messages in thread
From: Albert ARIBAUD @ 2011-05-10 21:55 UTC (permalink / raw)
To: u-boot
Le 09/05/2011 13:49, Stefano Babic a ?crit :
> Hi Albert,
>
> please pull from u-boot-imx.
>
> The following changes since commit 96d04c3150ae9284500aef48803d7d132968f2b2:
>
> IDE: fix compiler warnings (2011-04-30 23:29:55 +0200)
>
> are available in the git repository at:
> git://www.denx.de/git/u-boot-imx.git master
>
> Fabio Estevam (2):
> MX31: mx31pdk: Add watchdog support
> gpio: imx: Fix return value on error
>
> Stefano Babic (2):
> MX31: removed warning due to missing prototype
> MX31: change return value of get_cpu_rev
Hi Stefano,
This is weird: if I 'git fetch' your repo, I don't get a new master
branch from it (previous fetch was when you sent out your previous pull
request. The master I see from you is at "mx31pdk: Clean up mx31pdk.h
file" (97ed77ba9c12158860b6a94caaa60df437588973), which is not in the
list above. Can you double-check?
Amicalement,
--
Albert.
^ permalink raw reply [flat|nested] 116+ messages in thread
* [U-Boot] [GIT PULL] Pull request: u-boot-imx
@ 2011-05-09 11:49 Stefano Babic
2011-05-10 21:55 ` Albert ARIBAUD
2011-05-11 20:58 ` Albert ARIBAUD
0 siblings, 2 replies; 116+ messages in thread
From: Stefano Babic @ 2011-05-09 11:49 UTC (permalink / raw)
To: u-boot
Hi Albert,
please pull from u-boot-imx.
The following changes since commit 96d04c3150ae9284500aef48803d7d132968f2b2:
IDE: fix compiler warnings (2011-04-30 23:29:55 +0200)
are available in the git repository at:
git://www.denx.de/git/u-boot-imx.git master
Fabio Estevam (2):
MX31: mx31pdk: Add watchdog support
gpio: imx: Fix return value on error
Stefano Babic (2):
MX31: removed warning due to missing prototype
MX31: change return value of get_cpu_rev
arch/arm/cpu/arm1136/mx31/generic.c | 31
++++++++++++++++------------
arch/arm/include/asm/arch-mx31/clock.h | 1 +
arch/arm/include/asm/arch-mx31/imx-regs.h | 2 +-
board/freescale/mx31pdk/mx31pdk.c | 16 +++++++++++++++
drivers/gpio/mxc_gpio.c | 5 ++-
include/configs/mx31pdk.h | 3 ++
6 files changed, 42 insertions(+), 16 deletions(-)
Best regards,
Stefano Babic
--
=====================================================================
DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: +49-8142-66989-0 Fax: +49-8142-66989-80 Email: office at denx.de
=====================================================================
^ permalink raw reply [flat|nested] 116+ messages in thread
* [U-Boot] [GIT PULL] Pull request: u-boot-imx
@ 2011-04-22 12:50 Stefano Babic
0 siblings, 0 replies; 116+ messages in thread
From: Stefano Babic @ 2011-04-22 12:50 UTC (permalink / raw)
To: u-boot
Hi Albert,
my new pull request. Take care that I drop patches for the MX53 LOCO
board as discussed on the mailing list (they were part of last pull
request, commit 96c1b214b47416ae07aac267e45a600cc9567eed in uboot-arm).
This pull is against u-boot tree, as after dropping the patches I
rebased on it.
The following changes since commit 735eb0f0e66b544b1dfaf6c43ce6e4bd9ae64b5e:
tools/env: fix redundant env flag comparison (2011-04-21 00:25:08 +0200)
are available in the git repository at:
git://www.denx.de/git/u-boot-imx.git master
Fabio Estevam (5):
mx25: Make the UART port number explicit in its setup function
ARM: mx31: Print the silicon version
MX31: Introduce get_reset_cause()
MX31: mx31pdk: Make the board name simpler.
ARM: MX31: Fix file name label
Jason Liu (1):
MX5: factor out boot cause funciton to common code
Liu Hui-R64343 (2):
MX53: drop config.mk from mx53evk
MX5: Enable flat-device-tree support on mx51/53 evk board
Stefano Babic (6):
Makefile: change rule to build IMX image
MX51: drop config.mk from mx51evk
MX31: add support for MX31 watchdog
MX31: qong: add watchdog
IMX: MX31: Cleanup include files and drop nasty #ifdef in drivers
MX31: drop warnings in get_cpu_rev
Makefile | 2 +-
arch/arm/cpu/arm1136/mx31/devices.c | 4 +-
arch/arm/cpu/arm1136/mx31/generic.c | 59
+++++++++++++++++++-
arch/arm/cpu/arm1136/mx31/timer.c | 40 +++++++++++++-
arch/arm/cpu/arm926ejs/mx25/generic.c | 2 +-
arch/arm/cpu/armv7/mx5/soc.c | 28 +++++++++
arch/arm/include/asm/arch-mx31/{mx31.h => clock.h} | 6 +-
.../asm/arch-mx31/{mx31-regs.h => imx-regs.h} | 41 +++++++++++++-
board/davedenx/qong/fpga.c | 4 +-
board/davedenx/qong/lowlevel_init.S | 2 +-
board/davedenx/qong/qong.c | 16 +++++-
board/freescale/mx31ads/lowlevel_init.S | 2 +-
board/freescale/mx31ads/mx31ads.c | 4 +-
board/freescale/mx31pdk/lowlevel_init.S | 2 +-
board/freescale/mx31pdk/mx31pdk.c | 6 +-
board/freescale/mx51evk/config.mk | 25 --------
board/freescale/mx53evk/config.mk | 24 --------
board/imx31_phycore/imx31_phycore.c | 4 +-
board/imx31_phycore/lowlevel_init.S | 2 +-
board/karo/tx25/tx25.c | 4 +-
board/logicpd/imx31_litekit/imx31_litekit.c | 4 +-
board/logicpd/imx31_litekit/lowlevel_init.S | 2 +-
boards.cfg | 4 +-
drivers/gpio/mxc_gpio.c | 5 --
drivers/i2c/mxc_i2c.c | 7 +--
drivers/serial/serial_mxc.c | 4 -
drivers/spi/mxc_spi.c | 9 +--
drivers/usb/host/ehci-mxc.c | 2 +-
drivers/video/mx3fb.c | 6 +-
include/configs/imx31_litekit.h | 2 +-
include/configs/mx31ads.h | 2 +-
include/configs/mx31pdk.h | 2 +-
include/configs/mx51evk.h | 5 ++
include/configs/mx53evk.h | 3 +
include/configs/qong.h | 3 +-
nand_spl/nand_boot_fsl_nfc.c | 4 -
36 files changed, 221 insertions(+), 120 deletions(-)
rename arch/arm/include/asm/arch-mx31/{mx31.h => clock.h} (92%)
rename arch/arm/include/asm/arch-mx31/{mx31-regs.h => imx-regs.h} (97%)
delete mode 100644 board/freescale/mx51evk/config.mk
delete mode 100644 board/freescale/mx53evk/config.mk
--
=====================================================================
DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: +49-8142-66989-0 Fax: +49-8142-66989-80 Email: office at denx.de
=====================================================================
^ permalink raw reply [flat|nested] 116+ messages in thread
* [U-Boot] [GIT PULL] Pull request: u-boot-imx
2011-04-05 13:29 Stefano Babic
@ 2011-04-05 17:13 ` Albert ARIBAUD
0 siblings, 0 replies; 116+ messages in thread
From: Albert ARIBAUD @ 2011-04-05 17:13 UTC (permalink / raw)
To: u-boot
Hi Stefano,
Le 05/04/2011 15:29, Stefano Babic a ?crit :
> Hi Albert,
>
> The following changes since commit 67a490d60d70f2b01d55976440ba30154af96965:
>
> atmel_nand: don't require CONFIG_SYS_NAND_ENABLE_PIN (2011-04-01
> 14:49:08 -0500)
>
> are available in the git repository at:
> git://www.denx.de/git/u-boot-imx.git master
>
> Fabio Estevam (1):
> mx25: Make the UART port number explicit in its setup function
>
> Jason Liu (2):
> mx53loco: set mmc env to MMC slot1
> MX5: Enable flat-device-tree support on mx53 loco board
>
> Liu Hui-R64343 (3):
> MX53: drop config.mk from mx53evk
> MX53: support for freescale MX53LOCO board
> MX5: Enable flat-device-tree support on mx51/53 evk board
>
> Stefano Babic (5):
> Makefile: change rule to build IMX image
> MX51: drop config.mk from mx51evk
> MX31: add support for MX31 watchdog
> MX31: qong: add watchdog
> IMX: MX31: Cleanup include files and drop nasty #ifdef in drivers
>
> MAINTAINERS | 1 +
> Makefile | 2 +-
> arch/arm/cpu/arm1136/mx31/devices.c | 4 +-
> arch/arm/cpu/arm1136/mx31/generic.c | 2 +-
> arch/arm/cpu/arm1136/mx31/timer.c | 40 +++-
> arch/arm/cpu/arm926ejs/mx25/generic.c | 2 +-
> arch/arm/include/asm/arch-mx31/{mx31.h => clock.h} | 6 +-
> .../asm/arch-mx31/{mx31-regs.h => imx-regs.h} | 10 +
> board/davedenx/qong/fpga.c | 4 +-
> board/davedenx/qong/lowlevel_init.S | 2 +-
> board/davedenx/qong/qong.c | 16 +-
> board/freescale/mx31ads/lowlevel_init.S | 2 +-
> board/freescale/mx31ads/mx31ads.c | 4 +-
> board/freescale/mx31pdk/lowlevel_init.S | 2 +-
> board/freescale/mx31pdk/mx31pdk.c | 4 +-
> board/freescale/mx53evk/config.mk | 24 --
> .../{mx51evk/config.mk => mx53loco/Makefile} | 36 ++-
> board/freescale/mx53loco/imximage.cfg | 96 ++++++
> board/freescale/mx53loco/mx53loco.c | 316
> ++++++++++++++++++++
> board/imx31_phycore/imx31_phycore.c | 4 +-
> board/imx31_phycore/lowlevel_init.S | 2 +-
> board/karo/tx25/tx25.c | 4 +-
> board/logicpd/imx31_litekit/imx31_litekit.c | 4 +-
> board/logicpd/imx31_litekit/lowlevel_init.S | 2 +-
> boards.cfg | 5 +-
> drivers/gpio/mxc_gpio.c | 5 -
> drivers/i2c/mxc_i2c.c | 7 +-
> drivers/serial/serial_mxc.c | 4 -
> drivers/spi/mxc_spi.c | 9 +-
> drivers/usb/host/ehci-mxc.c | 2 +-
> drivers/video/mx3fb.c | 6 +-
> include/configs/imx31_litekit.h | 2 +-
> include/configs/mx31ads.h | 2 +-
> include/configs/mx31pdk.h | 2 +-
> include/configs/mx51evk.h | 5 +
> include/configs/mx53evk.h | 3 +
> include/configs/mx53loco.h | 199 ++++++++++++
> include/configs/qong.h | 3 +-
> nand_spl/nand_boot_fsl_nfc.c | 4 -
> 39 files changed, 751 insertions(+), 96 deletions(-)
> rename arch/arm/include/asm/arch-mx31/{mx31.h => clock.h} (92%)
> rename arch/arm/include/asm/arch-mx31/{mx31-regs.h => imx-regs.h} (99%)
> delete mode 100644 board/freescale/mx53evk/config.mk
> rename board/freescale/{mx51evk/config.mk => mx53loco/Makefile} (51%)
> create mode 100755 board/freescale/mx53loco/imximage.cfg
> create mode 100755 board/freescale/mx53loco/mx53loco.c
> create mode 100644 include/configs/mx53loco.h
>
> Best regards,
> Stefano
Applied, thanks.
Amicalement,
--
Albert.
^ permalink raw reply [flat|nested] 116+ messages in thread
* [U-Boot] [GIT PULL] Pull request: u-boot-imx
@ 2011-04-05 13:29 Stefano Babic
2011-04-05 17:13 ` Albert ARIBAUD
0 siblings, 1 reply; 116+ messages in thread
From: Stefano Babic @ 2011-04-05 13:29 UTC (permalink / raw)
To: u-boot
Hi Albert,
The following changes since commit 67a490d60d70f2b01d55976440ba30154af96965:
atmel_nand: don't require CONFIG_SYS_NAND_ENABLE_PIN (2011-04-01
14:49:08 -0500)
are available in the git repository at:
git://www.denx.de/git/u-boot-imx.git master
Fabio Estevam (1):
mx25: Make the UART port number explicit in its setup function
Jason Liu (2):
mx53loco: set mmc env to MMC slot1
MX5: Enable flat-device-tree support on mx53 loco board
Liu Hui-R64343 (3):
MX53: drop config.mk from mx53evk
MX53: support for freescale MX53LOCO board
MX5: Enable flat-device-tree support on mx51/53 evk board
Stefano Babic (5):
Makefile: change rule to build IMX image
MX51: drop config.mk from mx51evk
MX31: add support for MX31 watchdog
MX31: qong: add watchdog
IMX: MX31: Cleanup include files and drop nasty #ifdef in drivers
MAINTAINERS | 1 +
Makefile | 2 +-
arch/arm/cpu/arm1136/mx31/devices.c | 4 +-
arch/arm/cpu/arm1136/mx31/generic.c | 2 +-
arch/arm/cpu/arm1136/mx31/timer.c | 40 +++-
arch/arm/cpu/arm926ejs/mx25/generic.c | 2 +-
arch/arm/include/asm/arch-mx31/{mx31.h => clock.h} | 6 +-
.../asm/arch-mx31/{mx31-regs.h => imx-regs.h} | 10 +
board/davedenx/qong/fpga.c | 4 +-
board/davedenx/qong/lowlevel_init.S | 2 +-
board/davedenx/qong/qong.c | 16 +-
board/freescale/mx31ads/lowlevel_init.S | 2 +-
board/freescale/mx31ads/mx31ads.c | 4 +-
board/freescale/mx31pdk/lowlevel_init.S | 2 +-
board/freescale/mx31pdk/mx31pdk.c | 4 +-
board/freescale/mx53evk/config.mk | 24 --
.../{mx51evk/config.mk => mx53loco/Makefile} | 36 ++-
board/freescale/mx53loco/imximage.cfg | 96 ++++++
board/freescale/mx53loco/mx53loco.c | 316
++++++++++++++++++++
board/imx31_phycore/imx31_phycore.c | 4 +-
board/imx31_phycore/lowlevel_init.S | 2 +-
board/karo/tx25/tx25.c | 4 +-
board/logicpd/imx31_litekit/imx31_litekit.c | 4 +-
board/logicpd/imx31_litekit/lowlevel_init.S | 2 +-
boards.cfg | 5 +-
drivers/gpio/mxc_gpio.c | 5 -
drivers/i2c/mxc_i2c.c | 7 +-
drivers/serial/serial_mxc.c | 4 -
drivers/spi/mxc_spi.c | 9 +-
drivers/usb/host/ehci-mxc.c | 2 +-
drivers/video/mx3fb.c | 6 +-
include/configs/imx31_litekit.h | 2 +-
include/configs/mx31ads.h | 2 +-
include/configs/mx31pdk.h | 2 +-
include/configs/mx51evk.h | 5 +
include/configs/mx53evk.h | 3 +
include/configs/mx53loco.h | 199 ++++++++++++
include/configs/qong.h | 3 +-
nand_spl/nand_boot_fsl_nfc.c | 4 -
39 files changed, 751 insertions(+), 96 deletions(-)
rename arch/arm/include/asm/arch-mx31/{mx31.h => clock.h} (92%)
rename arch/arm/include/asm/arch-mx31/{mx31-regs.h => imx-regs.h} (99%)
delete mode 100644 board/freescale/mx53evk/config.mk
rename board/freescale/{mx51evk/config.mk => mx53loco/Makefile} (51%)
create mode 100755 board/freescale/mx53loco/imximage.cfg
create mode 100755 board/freescale/mx53loco/mx53loco.c
create mode 100644 include/configs/mx53loco.h
Best regards,
Stefano
--
=====================================================================
DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: +49-8142-66989-0 Fax: +49-8142-66989-80 Email: office at denx.de
=====================================================================
^ permalink raw reply [flat|nested] 116+ messages in thread
* [U-Boot] [GIT PULL] Pull request: u-boot-imx
2011-02-13 11:25 ` Albert ARIBAUD
@ 2011-02-13 11:57 ` Albert ARIBAUD
0 siblings, 0 replies; 116+ messages in thread
From: Albert ARIBAUD @ 2011-02-13 11:57 UTC (permalink / raw)
To: u-boot
Le 13/02/2011 12:25, Albert ARIBAUD a ?crit :
> Le 13/02/2011 10:56, Stefano Babic a ?crit :
>> Hi Albert,
>>
>> please pull from u-boot-imx.
>>
>> The following changes since commit 42d44f631c4e8e5359775bdc098f2fffde4e5c05:
>>
>> Prepare v2011.03-rc1 (2011-02-02 22:37:32 +0100)
>>
>> are available in the git repository at:
>> git://www.denx.de/git/u-boot-imx.git master
>
> Applied, thanks.
>
> Note pushing u-boot-arm/master caused a forced update of the remote
> branch although I had absolutely no error or warning when rebasing onto
> u-boot/master or merging u-boot-imx.
Note that I should note make notes while not having enough caffeine. The
rebase *is* the cause of the forced update, apparently.
Amicalement,
--
Albert.
^ permalink raw reply [flat|nested] 116+ messages in thread
* [U-Boot] [GIT PULL] Pull request: u-boot-imx
2011-02-13 9:56 Stefano Babic
@ 2011-02-13 11:25 ` Albert ARIBAUD
2011-02-13 11:57 ` Albert ARIBAUD
0 siblings, 1 reply; 116+ messages in thread
From: Albert ARIBAUD @ 2011-02-13 11:25 UTC (permalink / raw)
To: u-boot
Le 13/02/2011 10:56, Stefano Babic a ?crit :
> Hi Albert,
>
> please pull from u-boot-imx.
>
> The following changes since commit 42d44f631c4e8e5359775bdc098f2fffde4e5c05:
>
> Prepare v2011.03-rc1 (2011-02-02 22:37:32 +0100)
>
> are available in the git repository at:
> git://www.denx.de/git/u-boot-imx.git master
Applied, thanks.
Note pushing u-boot-arm/master caused a forced update of the remote
branch although I had absolutely no error or warning when rebasing onto
u-boot/master or merging u-boot-imx.
Amicalement,
--
Albert.
^ permalink raw reply [flat|nested] 116+ messages in thread
* [U-Boot] [GIT PULL] Pull request: u-boot-imx
@ 2011-02-13 9:56 Stefano Babic
2011-02-13 11:25 ` Albert ARIBAUD
0 siblings, 1 reply; 116+ messages in thread
From: Stefano Babic @ 2011-02-13 9:56 UTC (permalink / raw)
To: u-boot
Hi Albert,
please pull from u-boot-imx.
The following changes since commit 42d44f631c4e8e5359775bdc098f2fffde4e5c05:
Prepare v2011.03-rc1 (2011-02-02 22:37:32 +0100)
are available in the git repository at:
git://www.denx.de/git/u-boot-imx.git master
Fabio Estevam (2):
mx31pdk: Use the new relocation scheme
mx31pdk: Make the full boot log visible
Lo?c Minier (1):
EfikaMX: switch to MACH_TYPE_MX51_EFIKAMX
board/efikamx/efikamx.c | 2 +-
board/freescale/mx31pdk/mx31pdk.c | 17 ++++++-
include/configs/mx31pdk.h | 7 +++
nand_spl/board/freescale/mx31pdk/u-boot.lds | 59
+++++++++++++++++++++++---
4 files changed, 74 insertions(+), 11 deletions(-)
--
=====================================================================
DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: +49-8142-66989-0 Fax: +49-8142-66989-80 Email: office at denx.de
=====================================================================
^ permalink raw reply [flat|nested] 116+ messages in thread
* [U-Boot] [GIT PULL] Pull request: u-boot-imx
2011-02-01 18:13 Stefano Babic
@ 2011-02-01 23:58 ` Albert ARIBAUD
0 siblings, 0 replies; 116+ messages in thread
From: Albert ARIBAUD @ 2011-02-01 23:58 UTC (permalink / raw)
To: u-boot
Hi Stefano,
Le 01/02/2011 19:13, Stefano Babic a ?crit :
> Hi Albert,
>
> here my pull request for u-boot-imx. Since my last pull-request, I
> rebased my tree to substitute:
>
> imximage: Add MX53 boot image support
>
> I fixed the wrong mode,too, and I cherry-picked from u-boot-arm:
>
> ARM: fix broken build of ARM
>
> that you have already merged, to avoid leaving u-boot-imx broken. I hope
> this is not a problem for you.
Pulled into u-boot-arm/master, thanks -- had to force update, though.
Amicalement,
--
Albert.
^ permalink raw reply [flat|nested] 116+ messages in thread
* [U-Boot] [GIT PULL] Pull request: u-boot-imx
@ 2011-02-01 18:13 Stefano Babic
2011-02-01 23:58 ` Albert ARIBAUD
0 siblings, 1 reply; 116+ messages in thread
From: Stefano Babic @ 2011-02-01 18:13 UTC (permalink / raw)
To: u-boot
Hi Albert,
here my pull request for u-boot-imx. Since my last pull-request, I
rebased my tree to substitute:
imximage: Add MX53 boot image support
I fixed the wrong mode,too, and I cherry-picked from u-boot-arm:
ARM: fix broken build of ARM
that you have already merged, to avoid leaving u-boot-imx broken. I hope
this is not a problem for you.
The following changes since commit 6f918bd46482f889f4d94623b09daf659a1974bd:
Merge branch 'master' of git://git.denx.de/u-boot-mpc85xx (2011-01-31
23:20:32 +0100)
are available in the git repository at:
git://www.denx.de/git/u-boot-imx.git master
Anatolij Gustschin (2):
SPI: mxc_spi: fix swapping bug and add missing swapping in
unaligned rx case
SPI: mxc_spi: add SPI clock calculation and setup to the driver
Liu Hui-R64343 (9):
MX51EVK: UART does not print out the early information
MX5: Add initial support for MX53 processor
fec_mxc: add support for MX53 processor
serial_mxc: add support for MX53 processor
mxc_gpio: add support for MX53 processor
mxc_i2c: add support for MX53 processor
fsl_pmic: add I2C interface support
MX5:MX53: add initial support for MX53EVK board
imximage: Add MX53 boot image support
Marek Vasut (4):
BLOCK: Add freescale IMX51 PATA driver
MC13892: Add SWx buck switchers definitions
MX51EVK: Use SWx macros in PMIC init
iMX5: EfikaMX: Preliminary board support
Stefano Babic (13):
mxc_nand: add support for i.MX35 processor
Add support for MX35 processor
serial_mxc: add support for Freescale's i.MX35 processor
mxc_i2c: Add support for the i.MX35 processor
I2C: mxc_i2c: get rid of __REG access
I2C: mxc_i2c: address failure with mx35 processor
Add basic support for Freescale's mc9sdz60
SPI: mxc_spi: add support for i.MX35 processor
SPI: mxc_spi: replace fixed offsets with structures
Add support for Freescale's mx35pdk board.
MX5: Reuse the gd->tbl value for timestamp and add gd->lastinc for
lastinc bss
MXC: removed warnings from IMX51 ATA driver
ARM: fix broken build of ARM
MAINTAINERS | 8 +-
arch/arm/config.mk | 2 +-
arch/arm/cpu/arm1136/mx35/Makefile | 63 +++
arch/arm/cpu/arm1136/mx35/asm-offsets.c | 43 ++
arch/arm/cpu/arm1136/mx35/generic.c | 463 ++++++++++++++++++
arch/arm/cpu/arm1136/mx35/iomux.c | 116 +++++
arch/arm/cpu/arm1136/mx35/timer.c | 120 +++++
arch/arm/cpu/armv7/mx5/iomux.c | 30 +-
arch/arm/cpu/armv7/mx5/lowlevel_init.S | 91 +++--
arch/arm/cpu/armv7/mx5/soc.c | 22 +-
arch/arm/cpu/armv7/mx5/timer.c | 6 +-
arch/arm/include/asm/arch-mx31/mx31-regs.h | 11 +
arch/arm/include/asm/arch-mx35/clock.h | 45 ++
arch/arm/include/asm/arch-mx35/crm_regs.h | 270 +++++++++++
arch/arm/include/asm/arch-mx35/imx-regs.h | 303 ++++++++++++
arch/arm/include/asm/arch-mx35/iomux.h | 295 ++++++++++++
arch/arm/include/asm/arch-mx35/mx35_pins.h | 355 ++++++++++++++
arch/arm/include/asm/arch-mx35/sys_proto.h | 31 ++
arch/arm/include/asm/arch-mx5/asm-offsets.h | 5 +
arch/arm/include/asm/arch-mx5/imx-regs.h | 94 ++--
arch/arm/include/asm/arch-mx5/iomux.h | 102 ----
arch/arm/include/asm/arch-mx5/mx5x_pins.h | 469 ++++++++++++++++++-
board/efikamx/Makefile | 52 ++
board/efikamx/config.mk | 25 +
board/efikamx/efikamx.c | 689
+++++++++++++++++++++++++++
board/efikamx/imximage.cfg | 122 +++++
board/freescale/mx35pdk/Makefile | 49 ++
board/freescale/mx35pdk/lowlevel_init.S | 363 ++++++++++++++
board/freescale/mx35pdk/mx35pdk.c | 297 ++++++++++++
board/freescale/mx35pdk/mx35pdk.h | 101 ++++
board/freescale/mx51evk/mx51evk.c | 17 +-
board/freescale/mx53evk/Makefile | 48 ++
board/freescale/mx53evk/config.mk | 24 +
board/freescale/mx53evk/imximage.cfg | 112 +++++
board/freescale/mx53evk/mx53evk.c | 397 +++++++++++++++
boards.cfg | 3 +
doc/README.imximage | 12 +-
doc/README.mx35pdk | 188 ++++++++
drivers/block/Makefile | 1 +
drivers/block/mxc_ata.c | 146 ++++++
drivers/gpio/mxc_gpio.c | 9 +-
drivers/i2c/mxc_i2c.c | 172 +++++--
drivers/misc/Makefile | 5 +-
drivers/misc/fsl_pmic.c | 45 ++-
drivers/misc/mc9sdz60.c | 51 ++
drivers/mtd/nand/mxc_nand.c | 6 +-
drivers/net/fec_mxc.c | 2 +-
drivers/net/fec_mxc.h | 4 +-
drivers/serial/serial_mxc.c | 9 +-
drivers/spi/mxc_spi.c | 200 +++++----
include/configs/efikamx.h | 232 +++++++++
include/configs/mx35pdk.h | 303 ++++++++++++
include/configs/mx51evk.h | 5 +-
include/configs/mx53evk.h | 193 ++++++++
include/configs/vision2.h | 3 +-
include/mc13892.h | 44 ++
include/mc9sdz60.h | 84 ++++
include/netdev.h | 1 +
tools/imximage.c | 525 +++++++++++++++------
tools/imximage.h | 110 ++++-
60 files changed, 7067 insertions(+), 526 deletions(-)
create mode 100644 arch/arm/cpu/arm1136/mx35/Makefile
create mode 100644 arch/arm/cpu/arm1136/mx35/asm-offsets.c
create mode 100644 arch/arm/cpu/arm1136/mx35/generic.c
create mode 100644 arch/arm/cpu/arm1136/mx35/iomux.c
create mode 100644 arch/arm/cpu/arm1136/mx35/timer.c
create mode 100644 arch/arm/include/asm/arch-mx35/clock.h
create mode 100644 arch/arm/include/asm/arch-mx35/crm_regs.h
create mode 100644 arch/arm/include/asm/arch-mx35/imx-regs.h
create mode 100644 arch/arm/include/asm/arch-mx35/iomux.h
create mode 100644 arch/arm/include/asm/arch-mx35/mx35_pins.h
create mode 100644 arch/arm/include/asm/arch-mx35/sys_proto.h
create mode 100644 board/efikamx/Makefile
create mode 100644 board/efikamx/config.mk
create mode 100644 board/efikamx/efikamx.c
create mode 100644 board/efikamx/imximage.cfg
create mode 100644 board/freescale/mx35pdk/Makefile
create mode 100644 board/freescale/mx35pdk/lowlevel_init.S
create mode 100644 board/freescale/mx35pdk/mx35pdk.c
create mode 100644 board/freescale/mx35pdk/mx35pdk.h
create mode 100644 board/freescale/mx53evk/Makefile
create mode 100644 board/freescale/mx53evk/config.mk
create mode 100644 board/freescale/mx53evk/imximage.cfg
create mode 100644 board/freescale/mx53evk/mx53evk.c
create mode 100644 doc/README.mx35pdk
create mode 100644 drivers/block/mxc_ata.c
create mode 100644 drivers/misc/mc9sdz60.c
create mode 100644 include/configs/efikamx.h
create mode 100644 include/configs/mx35pdk.h
create mode 100644 include/configs/mx53evk.h
create mode 100644 include/mc9sdz60.h
Regards,
Stefano
--
=====================================================================
DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: +49-8142-66989-0 Fax: +49-8142-66989-80 Email: office at denx.de
=====================================================================
^ permalink raw reply [flat|nested] 116+ messages in thread
* [U-Boot] [GIT PULL] Pull request: u-boot-imx
2011-01-21 9:24 Stefano Babic
@ 2011-01-21 17:33 ` Albert ARIBAUD
0 siblings, 0 replies; 116+ messages in thread
From: Albert ARIBAUD @ 2011-01-21 17:33 UTC (permalink / raw)
To: u-boot
Le 21/01/2011 10:24, Stefano Babic a ?crit :
> Hi Albert,
>
> The following changes since commit d6a5e6d531e357dd8016141f73d370d02886a7eb:
>
> Cleanup .boards.depend when using an objtree (2011-01-21 08:56:50 +0100)
>
> are available in the git repository at:
> git://www.denx.de/git/u-boot-imx.git master
Pulled into u-boot-arm, thanks.
Amicalement,
--
Albert.
^ permalink raw reply [flat|nested] 116+ messages in thread
* [U-Boot] [GIT PULL] Pull request: u-boot-imx
@ 2011-01-21 9:24 Stefano Babic
2011-01-21 17:33 ` Albert ARIBAUD
0 siblings, 1 reply; 116+ messages in thread
From: Stefano Babic @ 2011-01-21 9:24 UTC (permalink / raw)
To: u-boot
Hi Albert,
The following changes since commit d6a5e6d531e357dd8016141f73d370d02886a7eb:
Cleanup .boards.depend when using an objtree (2011-01-21 08:56:50 +0100)
are available in the git repository at:
git://www.denx.de/git/u-boot-imx.git master
Liu Hui-R64343 (8):
MX51EVK: UART does not print out the early information
MX5: Add initial support for MX53 processor
fec_mxc: add support for MX53 processor
serial_mxc: add support for MX53 processor
mxc_gpio: add support for MX53 processor
mxc_i2c: add support for MX53 processor
fsl_pmic: add I2C interface support
MX5:MX53: add initial support for MX53EVK board
Marek Vasut (1):
BLOCK: Add freescale IMX51 PATA driver
Stefano Babic (1):
mxc_nand: add support for i.MX35 processor
MAINTAINERS | 4 +
arch/arm/cpu/armv7/mx5/iomux.c | 30 ++-
arch/arm/cpu/armv7/mx5/lowlevel_init.S | 91 +++---
arch/arm/cpu/armv7/mx5/soc.c | 22 +-
arch/arm/include/asm/arch-mx5/asm-offsets.h | 5 +
arch/arm/include/asm/arch-mx5/imx-regs.h | 82 ++---
arch/arm/include/asm/arch-mx5/iomux.h | 102 ------
arch/arm/include/asm/arch-mx5/mx5x_pins.h | 469
++++++++++++++++++++++++++-
board/freescale/mx51evk/mx51evk.c | 11 +-
board/freescale/mx53evk/Makefile | 48 +++
board/freescale/mx53evk/config.mk | 24 ++
board/freescale/mx53evk/imximage.cfg | 112 +++++++
board/freescale/mx53evk/mx53evk.c | 397 +++++++++++++++++++++++
boards.cfg | 1 +
drivers/block/Makefile | 1 +
drivers/block/mxc_ata.c | 149 +++++++++
drivers/gpio/mxc_gpio.c | 9 +-
drivers/i2c/mxc_i2c.c | 21 +-
drivers/misc/fsl_pmic.c | 45 +++-
drivers/mtd/nand/mxc_nand.c | 6 +-
drivers/net/fec_mxc.c | 2 +-
drivers/net/fec_mxc.h | 4 +-
drivers/serial/serial_mxc.c | 6 +
include/configs/mx51evk.h | 5 +-
include/configs/mx53evk.h | 193 +++++++++++
include/configs/vision2.h | 3 +-
include/mc13892.h | 5 +
27 files changed, 1620 insertions(+), 227 deletions(-)
mode change 100644 => 100755 arch/arm/cpu/armv7/mx5/iomux.c
mode change 100644 => 100755 arch/arm/cpu/armv7/mx5/lowlevel_init.S
mode change 100644 => 100755 arch/arm/include/asm/arch-mx5/imx-regs.h
mode change 100644 => 100755 arch/arm/include/asm/arch-mx5/mx5x_pins.h
create mode 100755 board/freescale/mx53evk/Makefile
create mode 100755 board/freescale/mx53evk/config.mk
create mode 100644 board/freescale/mx53evk/imximage.cfg
create mode 100755 board/freescale/mx53evk/mx53evk.c
create mode 100644 drivers/block/mxc_ata.c
mode change 100644 => 100755 drivers/i2c/mxc_i2c.c
mode change 100644 => 100755 include/configs/mx51evk.h
create mode 100755 include/configs/mx53evk.h
--
=====================================================================
DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: +49-8142-66989-0 Fax: +49-8142-66989-80 Email: office at denx.de
=====================================================================
^ permalink raw reply [flat|nested] 116+ messages in thread
* [U-Boot] [GIT PULL] Pull request: u-boot-imx
2011-01-17 19:10 ` Wolfgang Denk
@ 2011-01-17 19:30 ` Stefano Babic
0 siblings, 0 replies; 116+ messages in thread
From: Stefano Babic @ 2011-01-17 19:30 UTC (permalink / raw)
To: u-boot
On 01/17/2011 08:10 PM, Wolfgang Denk wrote:
> Is this really you working base? Then you should probably rebase
> against current master first.
Yes, I do it.
> Please sends your pull request to the Albert, ARM custodian.
Sorry, for the inconvenience. Albert has already saw I sent the pull
request to the wrong person and has pulled to u-boot-arm. I will be more
careful next time before sending the pull request.
Best regards,
Stefano Babic
--
=====================================================================
DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: +49-8142-66989-0 Fax: +49-8142-66989-80 Email: office at denx.de
=====================================================================
^ permalink raw reply [flat|nested] 116+ messages in thread
* [U-Boot] [GIT PULL] Pull request: u-boot-imx
2011-01-13 6:40 Stefano Babic
2011-01-13 7:20 ` Albert ARIBAUD
2011-01-13 21:30 ` Albert ARIBAUD
@ 2011-01-17 19:10 ` Wolfgang Denk
2011-01-17 19:30 ` Stefano Babic
2 siblings, 1 reply; 116+ messages in thread
From: Wolfgang Denk @ 2011-01-17 19:10 UTC (permalink / raw)
To: u-boot
Dear Stefano Babic,
In message <4D2E9E54.6040704@denx.de> you wrote:
> Hi Wolfgang,
>
> The following changes since commit cdc51c294ad33879c4e57edf4c9d2155381b1d59:
>
> Merge branch 'next' of ../next (2010-12-22 21:16:17 +0100)
Is this really you working base? Then you should probably rebase
against current master first.
> are available in the git repository at:
>
> git://www.denx.de/git/u-boot-imx.git master
Please sends your pull request to the Albert, ARM custodian.
Best regards,
Wolfgang Denk
--
DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd at denx.de
A modem is a baudy house.
^ permalink raw reply [flat|nested] 116+ messages in thread
* [U-Boot] [GIT PULL] Pull request: u-boot-imx
2011-01-13 6:40 Stefano Babic
2011-01-13 7:20 ` Albert ARIBAUD
@ 2011-01-13 21:30 ` Albert ARIBAUD
2011-01-17 19:10 ` Wolfgang Denk
2 siblings, 0 replies; 116+ messages in thread
From: Albert ARIBAUD @ 2011-01-13 21:30 UTC (permalink / raw)
To: u-boot
Le 13/01/2011 07:40, Stefano Babic a ?crit :
> Hi Wolfgang,
>
> The following changes since commit cdc51c294ad33879c4e57edf4c9d2155381b1d59:
>
> Merge branch 'next' of ../next (2010-12-22 21:16:17 +0100)
>
> are available in the git repository at:
>
> git://www.denx.de/git/u-boot-imx.git master
Applied to u-boot-arm/master, thanks.
Amicalement,
--
Albert.
^ permalink raw reply [flat|nested] 116+ messages in thread
* [U-Boot] [GIT PULL] Pull request: u-boot-imx
2011-01-13 7:20 ` Albert ARIBAUD
@ 2011-01-13 7:23 ` Stefano Babic
0 siblings, 0 replies; 116+ messages in thread
From: Stefano Babic @ 2011-01-13 7:23 UTC (permalink / raw)
To: u-boot
On 01/13/2011 08:20 AM, Albert ARIBAUD wrote:
>
> I think I should be the one doing the pull as the ARM custodian. I'll be
> doing it this evening.
Sorry, of course you are right, I forget to readdress my pull-request
after you became the ARM custodian ;-).
Stefano
--
=====================================================================
DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: +49-8142-66989-0 Fax: +49-8142-66989-80 Email: office at denx.de
=====================================================================
^ permalink raw reply [flat|nested] 116+ messages in thread
* [U-Boot] [GIT PULL] Pull request: u-boot-imx
2011-01-13 6:40 Stefano Babic
@ 2011-01-13 7:20 ` Albert ARIBAUD
2011-01-13 7:23 ` Stefano Babic
2011-01-13 21:30 ` Albert ARIBAUD
2011-01-17 19:10 ` Wolfgang Denk
2 siblings, 1 reply; 116+ messages in thread
From: Albert ARIBAUD @ 2011-01-13 7:20 UTC (permalink / raw)
To: u-boot
Le 13/01/2011 07:40, Stefano Babic a ?crit :
> Hi Wolfgang,
>
> The following changes since commit cdc51c294ad33879c4e57edf4c9d2155381b1d59:
>
> Merge branch 'next' of ../next (2010-12-22 21:16:17 +0100)
>
> are available in the git repository at:
>
> git://www.denx.de/git/u-boot-imx.git master
>
> Liu Hui-R64343 (9):
> MX51EVK: UART does not print out the early information
> MX5: Add initial support for MX53 processor
> fec_mxc: add support for MX53 processor
> serial_mxc: add support for MX53 processor
> mxc_gpio: add support for MX53 processor
> mxc_i2c: add support for MX53 processor
> fsl_pmic: add I2C interface support
> imximage: Add MX53 boot image support
> MX5:MX53: add initial support for MX53EVK board
>
> MAINTAINERS | 4 +
> arch/arm/cpu/armv7/mx5/iomux.c | 30 ++-
> arch/arm/cpu/armv7/mx5/lowlevel_init.S | 91 +++---
> arch/arm/cpu/armv7/mx5/soc.c | 22 +-
> arch/arm/include/asm/arch-mx5/asm-offsets.h | 5 +
> arch/arm/include/asm/arch-mx5/imx-regs.h | 82 ++---
> arch/arm/include/asm/arch-mx5/iomux.h | 102 ------
> arch/arm/include/asm/arch-mx5/mx5x_pins.h | 469
> ++++++++++++++++++++++++++-
> board/freescale/mx51evk/mx51evk.c | 11 +-
> board/freescale/mx53evk/Makefile | 48 +++
> board/freescale/mx53evk/config.mk | 24 ++
> board/freescale/mx53evk/imximage.cfg | 112 +++++++
> board/freescale/mx53evk/mx53evk.c | 397 +++++++++++++++++++++++
> boards.cfg | 1 +
> doc/README.imximage | 12 +-
> drivers/gpio/mxc_gpio.c | 9 +-
> drivers/i2c/mxc_i2c.c | 21 +-
> drivers/misc/fsl_pmic.c | 45 +++-
> drivers/net/fec_mxc.c | 2 +-
> drivers/net/fec_mxc.h | 4 +-
> drivers/serial/serial_mxc.c | 6 +
> include/configs/mx51evk.h | 5 +-
> include/configs/mx53evk.h | 193 +++++++++++
> include/configs/vision2.h | 3 +-
> include/mc13892.h | 5 +
> tools/imximage.c | 421 +++++++++++++++++++-----
> tools/imximage.h | 110 +++++--
> 27 files changed, 1900 insertions(+), 334 deletions(-)
> mode change 100644 => 100755 arch/arm/cpu/armv7/mx5/iomux.c
> mode change 100644 => 100755 arch/arm/cpu/armv7/mx5/lowlevel_init.S
> mode change 100644 => 100755 arch/arm/include/asm/arch-mx5/imx-regs.h
> mode change 100644 => 100755 arch/arm/include/asm/arch-mx5/mx5x_pins.h
> create mode 100755 board/freescale/mx53evk/Makefile
> create mode 100755 board/freescale/mx53evk/config.mk
> create mode 100644 board/freescale/mx53evk/imximage.cfg
> create mode 100755 board/freescale/mx53evk/mx53evk.c
> mode change 100644 => 100755 drivers/i2c/mxc_i2c.c
> mode change 100644 => 100755 include/configs/mx51evk.h
> create mode 100755 include/configs/mx53evk.h
I think I should be the one doing the pull as the ARM custodian. I'll be
doing it this evening.
Amicalement,
--
Albert.
^ permalink raw reply [flat|nested] 116+ messages in thread
* [U-Boot] [GIT PULL] Pull request: u-boot-imx
@ 2011-01-13 6:40 Stefano Babic
2011-01-13 7:20 ` Albert ARIBAUD
` (2 more replies)
0 siblings, 3 replies; 116+ messages in thread
From: Stefano Babic @ 2011-01-13 6:40 UTC (permalink / raw)
To: u-boot
Hi Wolfgang,
The following changes since commit cdc51c294ad33879c4e57edf4c9d2155381b1d59:
Merge branch 'next' of ../next (2010-12-22 21:16:17 +0100)
are available in the git repository at:
git://www.denx.de/git/u-boot-imx.git master
Liu Hui-R64343 (9):
MX51EVK: UART does not print out the early information
MX5: Add initial support for MX53 processor
fec_mxc: add support for MX53 processor
serial_mxc: add support for MX53 processor
mxc_gpio: add support for MX53 processor
mxc_i2c: add support for MX53 processor
fsl_pmic: add I2C interface support
imximage: Add MX53 boot image support
MX5:MX53: add initial support for MX53EVK board
MAINTAINERS | 4 +
arch/arm/cpu/armv7/mx5/iomux.c | 30 ++-
arch/arm/cpu/armv7/mx5/lowlevel_init.S | 91 +++---
arch/arm/cpu/armv7/mx5/soc.c | 22 +-
arch/arm/include/asm/arch-mx5/asm-offsets.h | 5 +
arch/arm/include/asm/arch-mx5/imx-regs.h | 82 ++---
arch/arm/include/asm/arch-mx5/iomux.h | 102 ------
arch/arm/include/asm/arch-mx5/mx5x_pins.h | 469
++++++++++++++++++++++++++-
board/freescale/mx51evk/mx51evk.c | 11 +-
board/freescale/mx53evk/Makefile | 48 +++
board/freescale/mx53evk/config.mk | 24 ++
board/freescale/mx53evk/imximage.cfg | 112 +++++++
board/freescale/mx53evk/mx53evk.c | 397 +++++++++++++++++++++++
boards.cfg | 1 +
doc/README.imximage | 12 +-
drivers/gpio/mxc_gpio.c | 9 +-
drivers/i2c/mxc_i2c.c | 21 +-
drivers/misc/fsl_pmic.c | 45 +++-
drivers/net/fec_mxc.c | 2 +-
drivers/net/fec_mxc.h | 4 +-
drivers/serial/serial_mxc.c | 6 +
include/configs/mx51evk.h | 5 +-
include/configs/mx53evk.h | 193 +++++++++++
include/configs/vision2.h | 3 +-
include/mc13892.h | 5 +
tools/imximage.c | 421 +++++++++++++++++++-----
tools/imximage.h | 110 +++++--
27 files changed, 1900 insertions(+), 334 deletions(-)
mode change 100644 => 100755 arch/arm/cpu/armv7/mx5/iomux.c
mode change 100644 => 100755 arch/arm/cpu/armv7/mx5/lowlevel_init.S
mode change 100644 => 100755 arch/arm/include/asm/arch-mx5/imx-regs.h
mode change 100644 => 100755 arch/arm/include/asm/arch-mx5/mx5x_pins.h
create mode 100755 board/freescale/mx53evk/Makefile
create mode 100755 board/freescale/mx53evk/config.mk
create mode 100644 board/freescale/mx53evk/imximage.cfg
create mode 100755 board/freescale/mx53evk/mx53evk.c
mode change 100644 => 100755 drivers/i2c/mxc_i2c.c
mode change 100644 => 100755 include/configs/mx51evk.h
create mode 100755 include/configs/mx53evk.h
--
=====================================================================
DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: +49-8142-66989-0 Fax: +49-8142-66989-80 Email: office at denx.de
=====================================================================
^ permalink raw reply [flat|nested] 116+ messages in thread
* [U-Boot] [GIT PULL] Pull request: u-boot-imx
2010-12-09 10:05 stefano babic
@ 2010-12-09 19:54 ` Wolfgang Denk
0 siblings, 0 replies; 116+ messages in thread
From: Wolfgang Denk @ 2010-12-09 19:54 UTC (permalink / raw)
To: u-boot
Dear stefano babic,
In message <4D00A9DD.5030105@denx.de> you wrote:
>
> I sent on 24/11 a pull request, but I can't find it in the ML archive
> and you have not yet merged, so it seems it was lost. I resubmit it as
> it is. Drop this mail if you have already seen it.
Sorry, seems I really missed that.
> The following changes since commit 8ad25bf8d9233eb7d0b614612108622a59069354:
>
> Net: clarify board/cpu_eth_init calls (2010-11-15 00:01:15 +0100)
>
> are available in the git repository at:
> git://www.denx.de/git/u-boot-imx.git master
>
> Jason Liu (1):
> mx51evk: savenv or env save command does not work
>
> Liu Hui-R64343 (1):
> imx: Get fec mac address from fuse
>
> arch/arm/cpu/arm926ejs/mx25/generic.c | 12 ++++++++++
> arch/arm/cpu/arm926ejs/mx27/generic.c | 12 ++++++++++
> arch/arm/cpu/armv7/mx5/soc.c | 14 ++++++++++++
> arch/arm/include/asm/arch-mx25/imx-regs.h | 19 +++++++++------
> arch/arm/include/asm/arch-mx27/imx-regs.h | 20 +++++++++++------
> arch/arm/include/asm/arch-mx5/imx-regs.h | 34
> +++++++++++++++++++++++++++++
> drivers/net/fec_mxc.c | 17 +------------
> include/configs/mx51evk.h | 7 +++--
> 8 files changed, 102 insertions(+), 33 deletions(-)
Apllied (directly to master). Thanks.
Best regards,
Wolfgang Denk
--
DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd at denx.de
The IQ of the group is the lowest IQ of a member of the group divided
by the number of people in the group.
^ permalink raw reply [flat|nested] 116+ messages in thread
* [U-Boot] [GIT PULL] Pull request: u-boot-imx
@ 2010-12-09 10:05 stefano babic
2010-12-09 19:54 ` Wolfgang Denk
0 siblings, 1 reply; 116+ messages in thread
From: stefano babic @ 2010-12-09 10:05 UTC (permalink / raw)
To: u-boot
Hi Wolfgang,
I sent on 24/11 a pull request, but I can't find it in the ML archive
and you have not yet merged, so it seems it was lost. I resubmit it as
it is. Drop this mail if you have already seen it.
The following changes since commit 8ad25bf8d9233eb7d0b614612108622a59069354:
Net: clarify board/cpu_eth_init calls (2010-11-15 00:01:15 +0100)
are available in the git repository at:
git://www.denx.de/git/u-boot-imx.git master
Jason Liu (1):
mx51evk: savenv or env save command does not work
Liu Hui-R64343 (1):
imx: Get fec mac address from fuse
arch/arm/cpu/arm926ejs/mx25/generic.c | 12 ++++++++++
arch/arm/cpu/arm926ejs/mx27/generic.c | 12 ++++++++++
arch/arm/cpu/armv7/mx5/soc.c | 14 ++++++++++++
arch/arm/include/asm/arch-mx25/imx-regs.h | 19 +++++++++------
arch/arm/include/asm/arch-mx27/imx-regs.h | 20 +++++++++++------
arch/arm/include/asm/arch-mx5/imx-regs.h | 34
+++++++++++++++++++++++++++++
drivers/net/fec_mxc.c | 17 +------------
include/configs/mx51evk.h | 7 +++--
8 files changed, 102 insertions(+), 33 deletions(-)
--
=====================================================================
DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: +49-8142-66989-0 Fax: +49-8142-66989-80 Email: office at denx.de
=====================================================================
^ permalink raw reply [flat|nested] 116+ messages in thread
* [U-Boot] [GIT PULL] Pull request: u-boot-imx
2010-10-28 11:25 Stefano Babic
@ 2010-10-29 19:50 ` Wolfgang Denk
0 siblings, 0 replies; 116+ messages in thread
From: Wolfgang Denk @ 2010-10-29 19:50 UTC (permalink / raw)
To: u-boot
Dear Stefano Babic,
In message <4CC95DBE.9040809@denx.de> you wrote:
> Hi Wolfgang,
>
> please pull from u-boot-imx
>
> The following changes since commit 908614f20f7f0f5df736eed21b88e81ebbf14e86:
>
> Prepare v2010.12-rc1 (2010-10-27 22:49:13 +0200)
>
> are available in the git repository at:
> git://www.denx.de/git/u-boot-imx.git master
>
> Jason Liu (1):
> MX5:use common u-boot.lds of cpu layer
>
> Matthias Weisser (1):
> imx25: Fix reset
>
> Shawn Guo (3):
> mx51evk: Fix 2 hours reset issue
> mx51evk: consolidate env for mmcboot and netboot
> mx51evk: support new relocation scheme
>
> Stefano Babic (2):
> MX51: add CONFIG_SYS_TEXT_BASE to vision2 board, use general ld script
> MX51: remove warning in clock.c
>
> arch/arm/cpu/arm926ejs/mx25/reset.c | 8 ++--
> arch/arm/cpu/armv7/mx5/clock.c | 2 +-
> arch/arm/cpu/armv7/mx5/u-boot.lds | 73
> -----------------------------
> arch/arm/include/asm/arch-mx25/imx-regs.h | 14 +++--
> arch/arm/include/asm/arch-mx5/imx-regs.h | 3 +-
> board/freescale/mx51evk/config.mk | 1 -
> board/freescale/mx51evk/mx51evk.c | 14 +++---
> board/ttcontrol/vision2/config.mk | 4 +-
> include/configs/mx51evk.h | 62 +++++++++++++++++++------
> include/mc13892.h | 16 +++---
> 10 files changed, 80 insertions(+), 117 deletions(-)
> delete mode 100644 arch/arm/cpu/armv7/mx5/u-boot.lds
Applied, thanks.
Best regards,
Wolfgang Denk
--
DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd at denx.de
"If you want to eat hippopatomus, you've got to pay the freight." -
attributed to an IBM guy, about why IBM software uses so much memory
^ permalink raw reply [flat|nested] 116+ messages in thread
* [U-Boot] [GIT PULL] Pull request: u-boot-imx
@ 2010-10-28 11:25 Stefano Babic
2010-10-29 19:50 ` Wolfgang Denk
0 siblings, 1 reply; 116+ messages in thread
From: Stefano Babic @ 2010-10-28 11:25 UTC (permalink / raw)
To: u-boot
Hi Wolfgang,
please pull from u-boot-imx
The following changes since commit 908614f20f7f0f5df736eed21b88e81ebbf14e86:
Prepare v2010.12-rc1 (2010-10-27 22:49:13 +0200)
are available in the git repository at:
git://www.denx.de/git/u-boot-imx.git master
Jason Liu (1):
MX5:use common u-boot.lds of cpu layer
Matthias Weisser (1):
imx25: Fix reset
Shawn Guo (3):
mx51evk: Fix 2 hours reset issue
mx51evk: consolidate env for mmcboot and netboot
mx51evk: support new relocation scheme
Stefano Babic (2):
MX51: add CONFIG_SYS_TEXT_BASE to vision2 board, use general ld script
MX51: remove warning in clock.c
arch/arm/cpu/arm926ejs/mx25/reset.c | 8 ++--
arch/arm/cpu/armv7/mx5/clock.c | 2 +-
arch/arm/cpu/armv7/mx5/u-boot.lds | 73
-----------------------------
arch/arm/include/asm/arch-mx25/imx-regs.h | 14 +++--
arch/arm/include/asm/arch-mx5/imx-regs.h | 3 +-
board/freescale/mx51evk/config.mk | 1 -
board/freescale/mx51evk/mx51evk.c | 14 +++---
board/ttcontrol/vision2/config.mk | 4 +-
include/configs/mx51evk.h | 62 +++++++++++++++++++------
include/mc13892.h | 16 +++---
10 files changed, 80 insertions(+), 117 deletions(-)
delete mode 100644 arch/arm/cpu/armv7/mx5/u-boot.lds
--
=====================================================================
DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: +49-8142-66989-0 Fax: +49-8142-66989-80 Email: office at denx.de
=====================================================================
^ permalink raw reply [flat|nested] 116+ messages in thread
* [U-Boot] [GIT PULL] Pull request: u-boot-imx
2010-10-19 14:09 Stefano Babic
@ 2010-10-19 18:58 ` Wolfgang Denk
0 siblings, 0 replies; 116+ messages in thread
From: Wolfgang Denk @ 2010-10-19 18:58 UTC (permalink / raw)
To: u-boot
Dear Stefano Babic,
In message <4CBDA6A2.5010806@denx.de> you wrote:
> Hi Wolfgang,
>
> please pull from u-boot-imx.
>
> The following changes since commit cacc342d5aa311673efdc05770cb53246dd41c9f:
>
> Merge branch 'master' of git://git.denx.de/u-boot-arm (2010-10-17
> 20:25:05 +0200)
>
> are available in the git repository at:
>
> git://git.denx.de/u-boot-imx master
>
> Jason Liu (2):
> MX5: rename mx51 to mx5
> MX5: Remove dead code with ENABLE_IMPRECISE_ABORT
>
> Magnus Lilja (1):
> i.MX31: Fix Litekit board to use new ARM relocation support.
>
> Stefano Babic (1):
> MX31: add delay between USB port setup and reset
>
> Wolfgang Denk (1):
> QONG: fix and update board config file
>
> arch/arm/cpu/armv7/{mx51 => mx5}/Makefile | 0
> arch/arm/cpu/armv7/{mx51 => mx5}/clock.c | 42
> ++++++++++----------
> arch/arm/cpu/armv7/{mx51 => mx5}/iomux.c | 2 +-
> arch/arm/cpu/armv7/{mx51 => mx5}/lowlevel_init.S | 14 -------
> arch/arm/cpu/armv7/{mx51 => mx5}/soc.c | 28 ++++++++-----
> arch/arm/cpu/armv7/{mx51 => mx5}/speed.c | 0
> arch/arm/cpu/armv7/{mx51 => mx5}/timer.c | 8 ++--
> arch/arm/cpu/armv7/{mx51 => mx5}/u-boot.lds | 0
> .../asm/{arch-mx51 => arch-mx5}/asm-offsets.h | 0
> .../include/asm/{arch-mx51 => arch-mx5}/clock.h | 0
> .../include/asm/{arch-mx51 => arch-mx5}/crm_regs.h | 0
> .../include/asm/{arch-mx51 => arch-mx5}/imx-regs.h | 0
> .../include/asm/{arch-mx51 => arch-mx5}/iomux.h | 8 ++--
> .../mx51_pins.h => arch-mx5/mx5x_pins.h} | 6 +-
> .../asm/{arch-mx51 => arch-mx5}/sys_proto.h | 0
> board/freescale/mx51evk/mx51evk.c | 2 +-
> board/logicpd/imx31_litekit/config.mk | 2 +-
> board/logicpd/imx31_litekit/imx31_litekit.c | 10 ++++-
> board/ttcontrol/vision2/vision2.c | 2 +-
> boards.cfg | 4 +-
> drivers/usb/host/ehci-mxc.c | 2 +
> include/configs/imx31_litekit.h | 7 +++
> include/configs/mx51evk.h | 4 +-
> include/configs/qong.h | 32 +++++++--------
> include/configs/vision2.h | 4 +-
> 25 files changed, 90 insertions(+), 87 deletions(-)
> rename arch/arm/cpu/armv7/{mx51 => mx5}/Makefile (100%)
> rename arch/arm/cpu/armv7/{mx51 => mx5}/clock.c (85%)
> rename arch/arm/cpu/armv7/{mx51 => mx5}/iomux.c (99%)
> rename arch/arm/cpu/armv7/{mx51 => mx5}/lowlevel_init.S (95%)
> rename arch/arm/cpu/armv7/{mx51 => mx5}/soc.c (81%)
> rename arch/arm/cpu/armv7/{mx51 => mx5}/speed.c (100%)
> rename arch/arm/cpu/armv7/{mx51 => mx5}/timer.c (92%)
> rename arch/arm/cpu/armv7/{mx51 => mx5}/u-boot.lds (100%)
> rename arch/arm/include/asm/{arch-mx51 => arch-mx5}/asm-offsets.h (100%)
> rename arch/arm/include/asm/{arch-mx51 => arch-mx5}/clock.h (100%)
> rename arch/arm/include/asm/{arch-mx51 => arch-mx5}/crm_regs.h (100%)
> rename arch/arm/include/asm/{arch-mx51 => arch-mx5}/imx-regs.h (100%)
> rename arch/arm/include/asm/{arch-mx51 => arch-mx5}/iomux.h (98%)
> rename arch/arm/include/asm/{arch-mx51/mx51_pins.h =>
> arch-mx5/mx5x_pins.h} (99%)
> rename arch/arm/include/asm/{arch-mx51 => arch-mx5}/sys_proto.h (100%)
Applied, thanks.
Best regards,
Wolfgang Denk
--
DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd at denx.de
It is practically impossible to teach good programming style to stu-
dents that have had prior exposure to BASIC: as potential programmers
they are mentally mutilated beyond hope of regeneration. - Dijkstra
^ permalink raw reply [flat|nested] 116+ messages in thread
* [U-Boot] [GIT PULL] Pull request: u-boot-imx
@ 2010-10-19 14:09 Stefano Babic
2010-10-19 18:58 ` Wolfgang Denk
0 siblings, 1 reply; 116+ messages in thread
From: Stefano Babic @ 2010-10-19 14:09 UTC (permalink / raw)
To: u-boot
Hi Wolfgang,
please pull from u-boot-imx.
The following changes since commit cacc342d5aa311673efdc05770cb53246dd41c9f:
Merge branch 'master' of git://git.denx.de/u-boot-arm (2010-10-17
20:25:05 +0200)
are available in the git repository at:
git://git.denx.de/u-boot-imx master
Jason Liu (2):
MX5: rename mx51 to mx5
MX5: Remove dead code with ENABLE_IMPRECISE_ABORT
Magnus Lilja (1):
i.MX31: Fix Litekit board to use new ARM relocation support.
Stefano Babic (1):
MX31: add delay between USB port setup and reset
Wolfgang Denk (1):
QONG: fix and update board config file
arch/arm/cpu/armv7/{mx51 => mx5}/Makefile | 0
arch/arm/cpu/armv7/{mx51 => mx5}/clock.c | 42
++++++++++----------
arch/arm/cpu/armv7/{mx51 => mx5}/iomux.c | 2 +-
arch/arm/cpu/armv7/{mx51 => mx5}/lowlevel_init.S | 14 -------
arch/arm/cpu/armv7/{mx51 => mx5}/soc.c | 28 ++++++++-----
arch/arm/cpu/armv7/{mx51 => mx5}/speed.c | 0
arch/arm/cpu/armv7/{mx51 => mx5}/timer.c | 8 ++--
arch/arm/cpu/armv7/{mx51 => mx5}/u-boot.lds | 0
.../asm/{arch-mx51 => arch-mx5}/asm-offsets.h | 0
.../include/asm/{arch-mx51 => arch-mx5}/clock.h | 0
.../include/asm/{arch-mx51 => arch-mx5}/crm_regs.h | 0
.../include/asm/{arch-mx51 => arch-mx5}/imx-regs.h | 0
.../include/asm/{arch-mx51 => arch-mx5}/iomux.h | 8 ++--
.../mx51_pins.h => arch-mx5/mx5x_pins.h} | 6 +-
.../asm/{arch-mx51 => arch-mx5}/sys_proto.h | 0
board/freescale/mx51evk/mx51evk.c | 2 +-
board/logicpd/imx31_litekit/config.mk | 2 +-
board/logicpd/imx31_litekit/imx31_litekit.c | 10 ++++-
board/ttcontrol/vision2/vision2.c | 2 +-
boards.cfg | 4 +-
drivers/usb/host/ehci-mxc.c | 2 +
include/configs/imx31_litekit.h | 7 +++
include/configs/mx51evk.h | 4 +-
include/configs/qong.h | 32 +++++++--------
include/configs/vision2.h | 4 +-
25 files changed, 90 insertions(+), 87 deletions(-)
rename arch/arm/cpu/armv7/{mx51 => mx5}/Makefile (100%)
rename arch/arm/cpu/armv7/{mx51 => mx5}/clock.c (85%)
rename arch/arm/cpu/armv7/{mx51 => mx5}/iomux.c (99%)
rename arch/arm/cpu/armv7/{mx51 => mx5}/lowlevel_init.S (95%)
rename arch/arm/cpu/armv7/{mx51 => mx5}/soc.c (81%)
rename arch/arm/cpu/armv7/{mx51 => mx5}/speed.c (100%)
rename arch/arm/cpu/armv7/{mx51 => mx5}/timer.c (92%)
rename arch/arm/cpu/armv7/{mx51 => mx5}/u-boot.lds (100%)
rename arch/arm/include/asm/{arch-mx51 => arch-mx5}/asm-offsets.h (100%)
rename arch/arm/include/asm/{arch-mx51 => arch-mx5}/clock.h (100%)
rename arch/arm/include/asm/{arch-mx51 => arch-mx5}/crm_regs.h (100%)
rename arch/arm/include/asm/{arch-mx51 => arch-mx5}/imx-regs.h (100%)
rename arch/arm/include/asm/{arch-mx51 => arch-mx5}/iomux.h (98%)
rename arch/arm/include/asm/{arch-mx51/mx51_pins.h =>
arch-mx5/mx5x_pins.h} (99%)
rename arch/arm/include/asm/{arch-mx51 => arch-mx5}/sys_proto.h (100%)
--
=====================================================================
DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: +49-8142-66989-0 Fax: +49-8142-66989-80 Email: office at denx.de
=====================================================================
^ permalink raw reply [flat|nested] 116+ messages in thread
* [U-Boot] [GIT PULL] Pull request: u-boot-imx
2010-10-14 8:42 Stefano Babic
@ 2010-10-17 17:57 ` Wolfgang Denk
0 siblings, 0 replies; 116+ messages in thread
From: Wolfgang Denk @ 2010-10-17 17:57 UTC (permalink / raw)
To: u-boot
Dear Stefano Babic,
In message <4CB6C28D.8030307@denx.de> you wrote:
>
> please pull from u-boot-imx
>
> The following changes since commit e79f48393dd919079b34f37957c933f8e75c164d:
> Lei Wen (1):
> env_mmc: fix cannot save env issue
>
> are available in the git repository at:
>
> git://git.denx.de/u-boot-imx master
>
> Loic Minier (1):
> mx51evk: add u-boot.imx to ALL target
>
> Stefano Babic (6):
> FPGA: add support for downloading Lattice bitstream
> MX31: Adding missing iomux pin to MX.31 registers
> MX31: Add support to update FPGA bitstream
> MX31: add support for setting pin pads
> MX31: Add support for MXC EHCI controller
> MX31: Add USB Host support to the QONG board
>
> arch/arm/cpu/arm1136/mx31/generic.c | 17 +
> arch/arm/include/asm/arch-mx31/mx31-regs.h | 411 ++++
> board/davedenx/qong/Makefile | 2 +-
> board/davedenx/qong/fpga.c | 95 +
> board/davedenx/qong/qong.c | 44 +
> board/davedenx/qong/qong_fpga.h | 3 +-
> board/freescale/mx51evk/config.mk | 1 +
> drivers/fpga/Makefile | 1 +
> drivers/fpga/fpga.c | 11 +
> drivers/fpga/ivm_core.c | 3167
> ++++++++++++++++++++++++++++
> drivers/fpga/lattice.c | 399 ++++
> drivers/usb/host/Makefile | 1 +
> drivers/usb/host/ehci-mxc.c | 130 ++
> drivers/video/mx3fb.c | 31 -
> include/configs/qong.h | 21 +-
> include/fpga.h | 1 +
> include/lattice.h | 319 +++
> 17 files changed, 4619 insertions(+), 35 deletions(-)
> create mode 100644 board/davedenx/qong/fpga.c
> create mode 100755 drivers/fpga/ivm_core.c
> create mode 100644 drivers/fpga/lattice.c
> create mode 100644 drivers/usb/host/ehci-mxc.c
> create mode 100755 include/lattice.h
Applied, thanks.
Best regards,
Wolfgang Denk
--
DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd at denx.de
It would be illogical to assume that all conditions remain stable
-- Spock, "The Enterprise" Incident", stardate 5027.3
^ permalink raw reply [flat|nested] 116+ messages in thread
* [U-Boot] [GIT PULL] Pull request: u-boot-imx
@ 2010-10-14 8:42 Stefano Babic
2010-10-17 17:57 ` Wolfgang Denk
0 siblings, 1 reply; 116+ messages in thread
From: Stefano Babic @ 2010-10-14 8:42 UTC (permalink / raw)
To: u-boot
Hi Wolfgang,
please pull from u-boot-imx
The following changes since commit e79f48393dd919079b34f37957c933f8e75c164d:
Lei Wen (1):
env_mmc: fix cannot save env issue
are available in the git repository at:
git://git.denx.de/u-boot-imx master
Loic Minier (1):
mx51evk: add u-boot.imx to ALL target
Stefano Babic (6):
FPGA: add support for downloading Lattice bitstream
MX31: Adding missing iomux pin to MX.31 registers
MX31: Add support to update FPGA bitstream
MX31: add support for setting pin pads
MX31: Add support for MXC EHCI controller
MX31: Add USB Host support to the QONG board
arch/arm/cpu/arm1136/mx31/generic.c | 17 +
arch/arm/include/asm/arch-mx31/mx31-regs.h | 411 ++++
board/davedenx/qong/Makefile | 2 +-
board/davedenx/qong/fpga.c | 95 +
board/davedenx/qong/qong.c | 44 +
board/davedenx/qong/qong_fpga.h | 3 +-
board/freescale/mx51evk/config.mk | 1 +
drivers/fpga/Makefile | 1 +
drivers/fpga/fpga.c | 11 +
drivers/fpga/ivm_core.c | 3167
++++++++++++++++++++++++++++
drivers/fpga/lattice.c | 399 ++++
drivers/usb/host/Makefile | 1 +
drivers/usb/host/ehci-mxc.c | 130 ++
drivers/video/mx3fb.c | 31 -
include/configs/qong.h | 21 +-
include/fpga.h | 1 +
include/lattice.h | 319 +++
17 files changed, 4619 insertions(+), 35 deletions(-)
create mode 100644 board/davedenx/qong/fpga.c
create mode 100755 drivers/fpga/ivm_core.c
create mode 100644 drivers/fpga/lattice.c
create mode 100644 drivers/usb/host/ehci-mxc.c
create mode 100755 include/lattice.h
--
=====================================================================
DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: +49-8142-66989-0 Fax: +49-8142-66989-80 Email: office at denx.de
=====================================================================
^ permalink raw reply [flat|nested] 116+ messages in thread
* [U-Boot] [GIT PULL] Pull request: u-boot-imx
2010-10-07 8:28 Stefano Babic
@ 2010-10-11 8:23 ` Wolfgang Denk
0 siblings, 0 replies; 116+ messages in thread
From: Wolfgang Denk @ 2010-10-11 8:23 UTC (permalink / raw)
To: u-boot
Dear Stefano Babic,
In message <4CAD8492.3000702@denx.de> you wrote:
> Hi Wolfgang,
>
> please pull from u-boot-imx.
>
> The following changes since commit 2e6e1772c0e34871769be4aef79748fe3e47d953:
> Wolfgang Denk (1):
> Merge branch 'next' of /home/wd/git/u-boot/next
>
> are available in the git repository at:
>
> git://git.denx.de/u-boot-imx master
>
> Stefano Babic (10):
> Use common function to set GPIOs for MX3 and MX5
> ARM: Use syslib functions for all CORTEXA8
> MX51: Added pins definition to set up pads
> MX51: add structure to access System Reset Controller
> MXC: Add watchdog support to serial driver
> MX51: Drop unused header file for mx51evk
> MXC: Correct SPI_CPOL setting in SPI driver
> MXC: Fix byte-ordering in SPI driver for i.MX31/i.MX51
> MX51: Register definitions cannot be included in board config file
> MX51: Support for TTECH vision2 board
>
> MAINTAINERS | 1 +
> arch/arm/cpu/armv7/Makefile | 3 +-
> arch/arm/cpu/armv7/omap-common/Makefile | 1 -
> arch/arm/cpu/armv7/{omap-common => }/syslib.c | 0
> arch/arm/include/asm/arch-mx31/mx31-regs.h | 14 +-
> arch/arm/include/asm/arch-mx31/mx31.h | 25 -
> arch/arm/include/asm/arch-mx51/imx-regs.h | 26 +-
> arch/arm/include/asm/arch-mx51/mx51_pins.h | 44 ++
> arch/arm/include/asm/arch-mx51/sys_proto.h | 1 +
> board/davedenx/qong/qong.c | 29 +-
> board/freescale/mx51evk/mx51evk.c | 2 -
> board/ttcontrol/vision2/Makefile | 48 ++
> board/ttcontrol/vision2/config.mk | 25 +
> board/ttcontrol/vision2/imximage_hynix.cfg | 209 ++++++
> board/ttcontrol/vision2/vision2.c | 711
> ++++++++++++++++++++
> boards.cfg | 1 +
> drivers/gpio/Makefile | 2 +-
> drivers/gpio/{mx31_gpio.c => mxc_gpio.c} | 47 +-
> drivers/misc/fsl_pmic.c | 10 +-
> drivers/serial/serial_mxc.c | 7 +-
> drivers/spi/mxc_spi.c | 168 ++++--
> include/configs/imx31_litekit.h | 4 +-
> include/configs/imx31_phycore.h | 2 +-
> include/configs/mx31ads.h | 4 +-
> include/configs/mx31pdk.h | 4 +-
> include/configs/mx51evk.h | 2 +-
> include/configs/qong.h | 6 +-
> include/configs/vision2.h | 214 ++++++
> include/mc13892.h | 3 +
> .../mx51evk/mx51evk.h => include/mxc_gpio.h | 50 +-
> 30 files changed, 1510 insertions(+), 153 deletions(-)
> rename arch/arm/cpu/armv7/{omap-common => }/syslib.c (100%)
> create mode 100644 board/ttcontrol/vision2/Makefile
> create mode 100644 board/ttcontrol/vision2/config.mk
> create mode 100644 board/ttcontrol/vision2/imximage_hynix.cfg
> create mode 100644 board/ttcontrol/vision2/vision2.c
> rename drivers/gpio/{mx31_gpio.c => mxc_gpio.c} (63%)
> create mode 100644 include/configs/vision2.h
> rename board/freescale/mx51evk/mx51evk.h => include/mxc_gpio.h (54%)
Applied, thanks.
Best regards,
Wolfgang Denk
--
DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd at denx.de
"Though a program be but three lines long,
someday it will have to be maintained."
- The Tao of Programming
^ permalink raw reply [flat|nested] 116+ messages in thread
* [U-Boot] [GIT PULL] Pull request: u-boot-imx
@ 2010-10-07 8:28 Stefano Babic
2010-10-11 8:23 ` Wolfgang Denk
0 siblings, 1 reply; 116+ messages in thread
From: Stefano Babic @ 2010-10-07 8:28 UTC (permalink / raw)
To: u-boot
Hi Wolfgang,
please pull from u-boot-imx.
The following changes since commit 2e6e1772c0e34871769be4aef79748fe3e47d953:
Wolfgang Denk (1):
Merge branch 'next' of /home/wd/git/u-boot/next
are available in the git repository at:
git://git.denx.de/u-boot-imx master
Stefano Babic (10):
Use common function to set GPIOs for MX3 and MX5
ARM: Use syslib functions for all CORTEXA8
MX51: Added pins definition to set up pads
MX51: add structure to access System Reset Controller
MXC: Add watchdog support to serial driver
MX51: Drop unused header file for mx51evk
MXC: Correct SPI_CPOL setting in SPI driver
MXC: Fix byte-ordering in SPI driver for i.MX31/i.MX51
MX51: Register definitions cannot be included in board config file
MX51: Support for TTECH vision2 board
MAINTAINERS | 1 +
arch/arm/cpu/armv7/Makefile | 3 +-
arch/arm/cpu/armv7/omap-common/Makefile | 1 -
arch/arm/cpu/armv7/{omap-common => }/syslib.c | 0
arch/arm/include/asm/arch-mx31/mx31-regs.h | 14 +-
arch/arm/include/asm/arch-mx31/mx31.h | 25 -
arch/arm/include/asm/arch-mx51/imx-regs.h | 26 +-
arch/arm/include/asm/arch-mx51/mx51_pins.h | 44 ++
arch/arm/include/asm/arch-mx51/sys_proto.h | 1 +
board/davedenx/qong/qong.c | 29 +-
board/freescale/mx51evk/mx51evk.c | 2 -
board/ttcontrol/vision2/Makefile | 48 ++
board/ttcontrol/vision2/config.mk | 25 +
board/ttcontrol/vision2/imximage_hynix.cfg | 209 ++++++
board/ttcontrol/vision2/vision2.c | 711
++++++++++++++++++++
boards.cfg | 1 +
drivers/gpio/Makefile | 2 +-
drivers/gpio/{mx31_gpio.c => mxc_gpio.c} | 47 +-
drivers/misc/fsl_pmic.c | 10 +-
drivers/serial/serial_mxc.c | 7 +-
drivers/spi/mxc_spi.c | 168 ++++--
include/configs/imx31_litekit.h | 4 +-
include/configs/imx31_phycore.h | 2 +-
include/configs/mx31ads.h | 4 +-
include/configs/mx31pdk.h | 4 +-
include/configs/mx51evk.h | 2 +-
include/configs/qong.h | 6 +-
include/configs/vision2.h | 214 ++++++
include/mc13892.h | 3 +
.../mx51evk/mx51evk.h => include/mxc_gpio.h | 50 +-
30 files changed, 1510 insertions(+), 153 deletions(-)
rename arch/arm/cpu/armv7/{omap-common => }/syslib.c (100%)
create mode 100644 board/ttcontrol/vision2/Makefile
create mode 100644 board/ttcontrol/vision2/config.mk
create mode 100644 board/ttcontrol/vision2/imximage_hynix.cfg
create mode 100644 board/ttcontrol/vision2/vision2.c
rename drivers/gpio/{mx31_gpio.c => mxc_gpio.c} (63%)
create mode 100644 include/configs/vision2.h
rename board/freescale/mx51evk/mx51evk.h => include/mxc_gpio.h (54%)
--
=====================================================================
DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: +49-8142-66989-0 Fax: +49-8142-66989-80 Email: office at denx.de
=====================================================================
^ permalink raw reply [flat|nested] 116+ messages in thread
* [U-Boot] [GIT PULL] Pull request: u-boot-imx
[not found] <4BE12AA5.8020605@denx.de>
@ 2010-05-11 15:04 ` Tom Rix
0 siblings, 0 replies; 116+ messages in thread
From: Tom Rix @ 2010-05-11 15:04 UTC (permalink / raw)
To: u-boot
Stefano Babic wrote:
>
> Hi Tom,
>
> please pull from u-boot-imx.
Applied,
Thanks
Tom
>
> The following changes since commit b88c5988db176a0f9de5598d5167ee2498637d40:
> Kim Phillips (1):
> configs: remove unused CONFIG_COMMAND_HISTORY
>
> are available in the git repository at:
>
> git://git.denx.de/u-boot-imx master
>
> Anatolij Gustschin (1):
> tx25: fix crash while booting Linux
>
> Fabio Estevam (1):
> MX51: Fix MX51 CPU detect message
>
> Magnus Lilja (1):
> i.MX31: Activate NAND support for i.MX31 Litekit board.
>
> Stefano Babic (7):
> MX51evk: Removed warnings
> MX: Added Freescale Power Management Driver
> MX: RTC13783 uses general function to access PMIC
> MX31: Add support for PMIC to the QONG module
> SPI: added support for MX51 to mxc_spi
> MX: Added definition file for MC13892
> Add SPI support to mx51evk board
>
> arch/arm/cpu/arm_cortexa8/mx51/soc.c | 2 +-
> board/davedenx/qong/qong.c | 20 +++
> board/freescale/mx51evk/mx51evk.c | 143 +++++++++++++++++++++-
> board/karo/tx25/tx25.c | 3 +
> drivers/misc/Makefile | 1 +
> drivers/misc/fsl_pmic.c | 200 +++++++++++++++++++++++++++++
> drivers/rtc/mc13783-rtc.c | 72 +++---------
> drivers/spi/mxc_spi.c | 231
> +++++++++++++++++++++++++++++++---
> include/configs/imx31_litekit.h | 19 +++-
> include/configs/mx31ads.h | 8 +-
> include/configs/mx31pdk.h | 9 +-
> include/configs/mx51evk.h | 15 +++
> include/configs/qong.h | 14 ++
> include/fsl_pmic.h | 128 +++++++++++++++++++
> include/mc13892.h | 160 +++++++++++++++++++++++
> 15 files changed, 935 insertions(+), 90 deletions(-)
> create mode 100644 drivers/misc/fsl_pmic.c
> create mode 100644 include/fsl_pmic.h
> create mode 100644 include/mc13892.h
>
>
^ permalink raw reply [flat|nested] 116+ messages in thread
* [U-Boot] [GIT PULL] Pull request: u-boot-imx
@ 2010-05-05 8:15 Stefano Babic
0 siblings, 0 replies; 116+ messages in thread
From: Stefano Babic @ 2010-05-05 8:15 UTC (permalink / raw)
To: u-boot
Hi Tom,
please pull from u-boot-imx.
The following changes since commit b88c5988db176a0f9de5598d5167ee2498637d40:
Kim Phillips (1):
configs: remove unused CONFIG_COMMAND_HISTORY
are available in the git repository at:
git://git.denx.de/u-boot-imx master
Anatolij Gustschin (1):
tx25: fix crash while booting Linux
Fabio Estevam (1):
MX51: Fix MX51 CPU detect message
Magnus Lilja (1):
i.MX31: Activate NAND support for i.MX31 Litekit board.
Stefano Babic (7):
MX51evk: Removed warnings
MX: Added Freescale Power Management Driver
MX: RTC13783 uses general function to access PMIC
MX31: Add support for PMIC to the QONG module
SPI: added support for MX51 to mxc_spi
MX: Added definition file for MC13892
Add SPI support to mx51evk board
arch/arm/cpu/arm_cortexa8/mx51/soc.c | 2 +-
board/davedenx/qong/qong.c | 20 +++
board/freescale/mx51evk/mx51evk.c | 143 +++++++++++++++++++++-
board/karo/tx25/tx25.c | 3 +
drivers/misc/Makefile | 1 +
drivers/misc/fsl_pmic.c | 200 +++++++++++++++++++++++++++++
drivers/rtc/mc13783-rtc.c | 72 +++---------
drivers/spi/mxc_spi.c | 231
+++++++++++++++++++++++++++++++---
include/configs/imx31_litekit.h | 19 +++-
include/configs/mx31ads.h | 8 +-
include/configs/mx31pdk.h | 9 +-
include/configs/mx51evk.h | 15 +++
include/configs/qong.h | 14 ++
include/fsl_pmic.h | 128 +++++++++++++++++++
include/mc13892.h | 160 +++++++++++++++++++++++
15 files changed, 935 insertions(+), 90 deletions(-)
create mode 100644 drivers/misc/fsl_pmic.c
create mode 100644 include/fsl_pmic.h
create mode 100644 include/mc13892.h
--
=====================================================================
DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: +49-8142-66989-0 Fax: +49-8142-66989-80 Email: office at denx.de
=====================================================================
^ permalink raw reply [flat|nested] 116+ messages in thread
* [U-Boot] [GIT PULL] Pull request: u-boot-imx
@ 2010-04-19 13:52 Stefano Babic
0 siblings, 0 replies; 116+ messages in thread
From: Stefano Babic @ 2010-04-19 13:52 UTC (permalink / raw)
To: u-boot
Hi Tom,
The following changes since commit 7c33c16f3bf53e563aa57e25e2399d0069a08749:
Stefano Babic (1):
Moved board specific values in config file
are available in the git repository at:
git://www.denx.de/git/u-boot-imx.git master
John Rigby (1):
MX25 print arm clock instead of mpllclk on boot
Stefano Babic (8):
mkimage: correct spelling error in imximage
mx51evk: correct list of possible BOOT_FROM values
MX31: add accessor function to get a gpio
MX31: add pin definitions for NAND controller
MX31: Add support for NAND to QONG board
MX31: Support 128MB RAM on QONG module
MX31: Add UBI support to QONG module
MX31: Removed erroneous board name from QONG
arch/arm/cpu/arm926ejs/mx25/generic.c | 2 +-
arch/arm/include/asm/arch-mx31/mx31-regs.h | 15 +++
arch/arm/include/asm/arch-mx31/mx31.h | 5 +
board/davedenx/qong/lowlevel_init.S | 130
+++++++++++++++++++++-------
board/davedenx/qong/qong.c | 95 ++++++++++++++++-----
board/davedenx/qong/qong_fpga.h | 4 +-
board/freescale/mx51evk/imximage.cfg | 2 +-
drivers/gpio/mx31_gpio.c | 15 +++
include/configs/qong.h | 40 ++++++++-
tools/imximage.c | 2 +-
10 files changed, 246 insertions(+), 64 deletions(-)
Thanks,
Stefano
--
=====================================================================
DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: +49-8142-66989-0 Fax: +49-8142-66989-80 Email: office at denx.de
=====================================================================
^ permalink raw reply [flat|nested] 116+ messages in thread
* [U-Boot] [GIT PULL] Pull request: u-boot-imx
2010-04-06 9:38 Stefano Babic
@ 2010-04-18 11:45 ` Tom Rix
0 siblings, 0 replies; 116+ messages in thread
From: Tom Rix @ 2010-04-18 11:45 UTC (permalink / raw)
To: u-boot
Stefano Babic wrote:
> Hi Tom,
>
> in the pull request there are also two patches by Heiko that were
> already included in the late pull, but they generated warnings and are
> not yet in mainline.
> The patch to remove these warnings was already merged by Wolfgang and it
> is in mainline.
>
>
> The following changes since commit ffa37fc98d71ef930bccd4e9eed37f6ce6b4d6af:
> Wolfgang Denk (1):
> Merge branch 'next'
>
> are available in the git repository at:
>
> git.denx.de/u-boot-imx.git master
>
> Fabio Estevam (1):
> MX51EVK: Remove CPLD related code
>
> Heiko Schocher (2):
> arm, mx27: add support for SDHC1 pin init
> arm, i.mx27: add support for magnesium board from projectiondesign
>
> Stefano Babic (1):
> Moved board specific values in config file
>
> MAINTAINERS | 4 +
> MAKEALL | 1 +
> Makefile | 1 +
> board/freescale/mx51evk/mx51evk.c | 67 ---------
> board/freescale/mx51evk/mx51evk.h | 1 -
> board/logicpd/imx27lite/imx27lite.c | 18 +++-
> cpu/arm926ejs/mx27/generic.c | 17 +++
> cpu/arm_cortexa8/mx51/lowlevel_init.S | 5 +-
> include/asm-arm/arch-mx27/imx-regs.h | 1 +
> include/configs/imx27lite-common.h | 237
> +++++++++++++++++++++++++++++++++
> include/configs/imx27lite.h | 200 +---------------------------
> include/configs/magnesium.h | 71 ++++++++++
> include/configs/mx51evk.h | 3 +
> 13 files changed, 360 insertions(+), 266 deletions(-)
> create mode 100644 include/configs/imx27lite-common.h
> create mode 100644 include/configs/magnesium.h
>
Applied to arm/master.
Thanks
Tom
^ permalink raw reply [flat|nested] 116+ messages in thread
* [U-Boot] [GIT PULL] Pull request: u-boot-imx
@ 2010-04-06 9:38 Stefano Babic
2010-04-18 11:45 ` Tom Rix
0 siblings, 1 reply; 116+ messages in thread
From: Stefano Babic @ 2010-04-06 9:38 UTC (permalink / raw)
To: u-boot
Hi Tom,
in the pull request there are also two patches by Heiko that were
already included in the late pull, but they generated warnings and are
not yet in mainline.
The patch to remove these warnings was already merged by Wolfgang and it
is in mainline.
The following changes since commit ffa37fc98d71ef930bccd4e9eed37f6ce6b4d6af:
Wolfgang Denk (1):
Merge branch 'next'
are available in the git repository at:
git.denx.de/u-boot-imx.git master
Fabio Estevam (1):
MX51EVK: Remove CPLD related code
Heiko Schocher (2):
arm, mx27: add support for SDHC1 pin init
arm, i.mx27: add support for magnesium board from projectiondesign
Stefano Babic (1):
Moved board specific values in config file
MAINTAINERS | 4 +
MAKEALL | 1 +
Makefile | 1 +
board/freescale/mx51evk/mx51evk.c | 67 ---------
board/freescale/mx51evk/mx51evk.h | 1 -
board/logicpd/imx27lite/imx27lite.c | 18 +++-
cpu/arm926ejs/mx27/generic.c | 17 +++
cpu/arm_cortexa8/mx51/lowlevel_init.S | 5 +-
include/asm-arm/arch-mx27/imx-regs.h | 1 +
include/configs/imx27lite-common.h | 237
+++++++++++++++++++++++++++++++++
include/configs/imx27lite.h | 200 +---------------------------
include/configs/magnesium.h | 71 ++++++++++
include/configs/mx51evk.h | 3 +
13 files changed, 360 insertions(+), 266 deletions(-)
create mode 100644 include/configs/imx27lite-common.h
create mode 100644 include/configs/magnesium.h
--
=====================================================================
DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: +49-8142-66989-0 Fax: +49-8142-66989-80 Email: office at denx.de
=====================================================================
^ permalink raw reply [flat|nested] 116+ messages in thread
* [U-Boot] [GIT PULL] Pull request: u-boot-imx
2010-03-05 14:54 ` Stefano Babic
@ 2010-03-05 17:24 ` Stefano Babic
0 siblings, 0 replies; 116+ messages in thread
From: Stefano Babic @ 2010-03-05 17:24 UTC (permalink / raw)
To: u-boot
Tom,
this is the pull request after you have already merged part of u-boot-imx.
The following changes since commit 75b464b721408cd8b26ba92a249f0726f37c7249:
John Rigby (1):
Add support for KARO TX25 board
are available in the git repository at:
git://git.denx.de/u-boot-imx master
Heiko Schocher (2):
arm, mx27: add support for SDHC1 pin init
arm, i.mx27: add support for magnesium board from projectiondesign
Stefano Babic (1):
MX51: removed warnings for the mx51evk
MAINTAINERS | 4 +
MAKEALL | 1 +
Makefile | 1 +
board/freescale/mx51evk/mx51evk.c | 11 +--
board/logicpd/imx27lite/imx27lite.c | 18 +++-
cpu/arm926ejs/mx27/generic.c | 17 +++
cpu/arm_cortexa8/mx51/clock.c | 3 +-
cpu/arm_cortexa8/mx51/iomux.c | 1 +
cpu/arm_cortexa8/mx51/lowlevel_init.S | 1 -
cpu/arm_cortexa8/mx51/soc.c | 7 +-
cpu/arm_cortexa8/mx51/speed.c | 1 +
include/asm-arm/arch-mx27/imx-regs.h | 1 +
include/asm-arm/arch-mx51/clock.h | 16 ++-
include/asm-arm/arch-mx51/imx-regs.h | 21 ---
include/asm-arm/arch-mx51/sys_proto.h | 30 ++++
include/configs/imx27lite-common.h | 237
+++++++++++++++++++++++++++++++++
include/configs/imx27lite.h | 200 +---------------------------
include/configs/magnesium.h | 71 ++++++++++
18 files changed, 408 insertions(+), 233 deletions(-)
create mode 100644 include/asm-arm/arch-mx51/sys_proto.h
create mode 100644 include/configs/imx27lite-common.h
create mode 100644 include/configs/magnesium.h
Thanks,
Stefano
--
=====================================================================
DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: +49-8142-66989-0 Fax: +49-8142-66989-80 Email: office at denx.de
=====================================================================
^ permalink raw reply [flat|nested] 116+ messages in thread
* [U-Boot] [GIT PULL] Pull request: u-boot-imx
2010-03-04 16:03 ` Tom
@ 2010-03-05 14:54 ` Stefano Babic
2010-03-05 17:24 ` Stefano Babic
0 siblings, 1 reply; 116+ messages in thread
From: Stefano Babic @ 2010-03-05 14:54 UTC (permalink / raw)
To: u-boot
Tom,
this is the updated pull-request for u-boot-imx. Warnings from mx51evk
were removed and the magnesium board was added (acked by Wolfgang to get
it in the release).
The following changes since commit f3651764e57e353251695691677bd95ba5a420bc:
Frans Meulenbroeks (1):
cmd_itest.c: fix pointer dereferencing
are available in the git repository at:
git://git.denx.de/u-boot-imx master
Heiko Schocher (2):
arm, mx27: add support for SDHC1 pin init
arm, i.mx27: add support for magnesium board from projectiondesign
John Rigby (5):
mxc_serial replace platform specific clock
Add support for Freescale MX25 SOC
fec_mxc: cleanup and factor out MX27 dependencies
fec_mxc: add MX25 support
Add support for KARO TX25 board
Stefano Babic (9):
MX51: Add initial support for the Freescale MX51
MX51: Add register definitions
MX51: Add pin and multiplexer definitions.
serial_mxc: add support for MX51 processor
mmc: check correctness of the voltage mask in ocr
MMC: add weak function to detect MMC/SD card
ARM: add accessors functions
fsl_esdhc: add support for mx51 processor
Add initial support for Freescale mx51evk board
MAINTAINERS | 12 +
MAKEALL | 2 +
Makefile | 9 +
board/freescale/mx51evk/Makefile | 48 ++++
board/freescale/mx51evk/config.mk | 25 ++
board/freescale/mx51evk/imximage.cfg | 119 +++++++++
board/freescale/mx51evk/mx51evk.c | 397
++++++++++++++++++++++++++++
board/freescale/mx51evk/mx51evk.h | 51 ++++
board/karo/tx25/Makefile | 51 ++++
board/karo/tx25/config.mk | 5 +
board/karo/tx25/lowlevel_init.S | 131 +++++++++
board/karo/tx25/tx25.c | 176 +++++++++++++
board/logicpd/imx27lite/imx27lite.c | 18 ++-
cpu/arm926ejs/mx25/Makefile | 46 ++++
cpu/arm926ejs/mx25/generic.c | 263 +++++++++++++++++++
cpu/arm926ejs/mx25/reset.c | 56 ++++
cpu/arm926ejs/mx25/timer.c | 187 +++++++++++++
cpu/arm926ejs/mx27/generic.c | 22 ++
cpu/arm_cortexa8/mx51/Makefile | 48 ++++
cpu/arm_cortexa8/mx51/clock.c | 294 +++++++++++++++++++++
cpu/arm_cortexa8/mx51/iomux.c | 166 ++++++++++++
cpu/arm_cortexa8/mx51/lowlevel_init.S | 288 ++++++++++++++++++++
cpu/arm_cortexa8/mx51/soc.c | 114 ++++++++
cpu/arm_cortexa8/mx51/speed.c | 39 +++
cpu/arm_cortexa8/mx51/timer.c | 119 +++++++++
cpu/arm_cortexa8/mx51/u-boot.lds | 61 +++++
drivers/mmc/fsl_esdhc.c | 149 +++++++----
drivers/mmc/mmc.c | 17 ++-
drivers/net/fec_mxc.c | 44 +++-
drivers/net/fec_mxc.h | 32 +++-
drivers/serial/serial_mxc.c | 28 ++-
include/asm-arm/arch-mx25/clock.h | 36 +++
include/asm-arm/arch-mx25/imx-regs.h | 316 ++++++++++++++++++++++
include/asm-arm/arch-mx27/imx-regs.h | 1 +
include/asm-arm/arch-mx31/mx31.h | 1 +
include/asm-arm/arch-mx51/asm-offsets.h | 50 ++++
include/asm-arm/arch-mx51/clock.h | 43 +++
include/asm-arm/arch-mx51/crm_regs.h | 192 ++++++++++++++
include/asm-arm/arch-mx51/imx-regs.h | 261 ++++++++++++++++++
include/asm-arm/arch-mx51/iomux.h | 193 ++++++++++++++
include/asm-arm/arch-mx51/mx51_pins.h | 374 ++++++++++++++++++++++++++
include/asm-arm/arch-mx51/sys_proto.h | 30 +++
include/asm-arm/global_data.h | 3 +
include/asm-arm/io.h | 55 ++++
include/configs/imx27lite-common.h | 237 +++++++++++++++++
include/configs/imx27lite.h | 200 +--------------
include/configs/magnesium.h | 71 +++++
include/configs/mx51evk.h | 172 ++++++++++++
include/configs/tx25.h | 179 +++++++++++++
include/fsl_esdhc.h | 27 ++
include/mmc.h | 1 +
lib_arm/board.c | 3 +
nand_spl/board/karo/tx25/Makefile | 78 ++++++
nand_spl/board/karo/tx25/config.mk | 1 +
nand_spl/board/karo/tx25/u-boot.lds | 58 ++++
57 files changed, 5758 insertions(+), 265 deletions(-)
create mode 100644 board/freescale/mx51evk/Makefile
create mode 100644 board/freescale/mx51evk/config.mk
create mode 100644 board/freescale/mx51evk/imximage.cfg
create mode 100644 board/freescale/mx51evk/mx51evk.c
create mode 100644 board/freescale/mx51evk/mx51evk.h
create mode 100644 board/karo/tx25/Makefile
create mode 100644 board/karo/tx25/config.mk
create mode 100644 board/karo/tx25/lowlevel_init.S
create mode 100644 board/karo/tx25/tx25.c
create mode 100644 cpu/arm926ejs/mx25/Makefile
create mode 100644 cpu/arm926ejs/mx25/generic.c
create mode 100644 cpu/arm926ejs/mx25/reset.c
create mode 100644 cpu/arm926ejs/mx25/timer.c
create mode 100644 cpu/arm_cortexa8/mx51/Makefile
create mode 100644 cpu/arm_cortexa8/mx51/clock.c
create mode 100644 cpu/arm_cortexa8/mx51/iomux.c
create mode 100644 cpu/arm_cortexa8/mx51/lowlevel_init.S
create mode 100644 cpu/arm_cortexa8/mx51/soc.c
create mode 100644 cpu/arm_cortexa8/mx51/speed.c
create mode 100644 cpu/arm_cortexa8/mx51/timer.c
create mode 100644 cpu/arm_cortexa8/mx51/u-boot.lds
create mode 100644 include/asm-arm/arch-mx25/clock.h
create mode 100644 include/asm-arm/arch-mx25/imx-regs.h
create mode 100644 include/asm-arm/arch-mx25/imx25-pinmux.h
create mode 100644 include/asm-arm/arch-mx51/asm-offsets.h
create mode 100644 include/asm-arm/arch-mx51/clock.h
create mode 100644 include/asm-arm/arch-mx51/crm_regs.h
create mode 100644 include/asm-arm/arch-mx51/imx-regs.h
create mode 100644 include/asm-arm/arch-mx51/iomux.h
create mode 100644 include/asm-arm/arch-mx51/mx51_pins.h
create mode 100644 include/asm-arm/arch-mx51/sys_proto.h
create mode 100644 include/configs/imx27lite-common.h
create mode 100644 include/configs/magnesium.h
create mode 100644 include/configs/mx51evk.h
create mode 100644 include/configs/tx25.h
create mode 100644 nand_spl/board/karo/tx25/Makefile
create mode 100644 nand_spl/board/karo/tx25/config.mk
create mode 100644 nand_spl/board/karo/tx25/u-boot.lds
--
=====================================================================
DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: +49-8142-66989-0 Fax: +49-8142-66989-80 Email: office at denx.de
=====================================================================
^ permalink raw reply [flat|nested] 116+ messages in thread
* [U-Boot] [GIT PULL] Pull request: u-boot-imx
2010-03-05 14:40 ` Tom
@ 2010-03-05 14:48 ` Stefano Babic
0 siblings, 0 replies; 116+ messages in thread
From: Stefano Babic @ 2010-03-05 14:48 UTC (permalink / raw)
To: u-boot
Tom wrote:
> I think the best thing to do is to send me a pull request soon when you
> think the imx branch is in good shape. I noticed, but did not apply, some
> of the imx changes that came after your first pull request. These should
> be included in the next pull request.
Ok, thanks. I send you the pull request.
Stefano
--
=====================================================================
DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: +49-8142-66989-0 Fax: +49-8142-66989-80 Email: office at denx.de
=====================================================================
^ permalink raw reply [flat|nested] 116+ messages in thread
* [U-Boot] [GIT PULL] Pull request: u-boot-imx
2010-03-05 14:16 ` Stefano Babic
@ 2010-03-05 14:40 ` Tom
2010-03-05 14:48 ` Stefano Babic
0 siblings, 1 reply; 116+ messages in thread
From: Tom @ 2010-03-05 14:40 UTC (permalink / raw)
To: u-boot
Stefano Babic wrote:
> Tom wrote:
>> This has been applied to ARM/master
>> The fixes for the warning expected but not required.
>> Thanks,
>> Tom
>
> Thanks, Tom. You are faster as I can send a git-pull-request ;)
>
> In fact, I have an hour ago updated the u-boot-imx branch, pulling the
> modified patches to remove warnings (patches was sent for small review
> yesterday, I have waited a while to be sure). Is there a chance to take
> the updated u-boot-imx branch or I have to send patches on top of arm
> master ?
>
> Stefano
>
I think the best thing to do is to send me a pull request soon when you
think the imx branch is in good shape. I noticed, but did not apply, some
of the imx changes that came after your first pull request. These should
be included in the next pull request.
I will send Wolfgang a pull request soon (this weekend) so if
there is something that needs to get into the main release, please send
me a request today or at the latest tomorrow.
Tom
^ permalink raw reply [flat|nested] 116+ messages in thread
* [U-Boot] [GIT PULL] Pull request: u-boot-imx
2010-03-05 14:00 ` Tom
@ 2010-03-05 14:16 ` Stefano Babic
2010-03-05 14:40 ` Tom
0 siblings, 1 reply; 116+ messages in thread
From: Stefano Babic @ 2010-03-05 14:16 UTC (permalink / raw)
To: u-boot
Tom wrote:
> This has been applied to ARM/master
> The fixes for the warning expected but not required.
> Thanks,
> Tom
Thanks, Tom. You are faster as I can send a git-pull-request ;)
In fact, I have an hour ago updated the u-boot-imx branch, pulling the
modified patches to remove warnings (patches was sent for small review
yesterday, I have waited a while to be sure). Is there a chance to take
the updated u-boot-imx branch or I have to send patches on top of arm
master ?
Stefano
--
=====================================================================
DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: +49-8142-66989-0 Fax: +49-8142-66989-80 Email: office at denx.de
=====================================================================
^ permalink raw reply [flat|nested] 116+ messages in thread
* [U-Boot] [GIT PULL] Pull request: u-boot-imx
2010-03-02 18:45 Stefano Babic
2010-03-04 16:03 ` Tom
@ 2010-03-05 14:00 ` Tom
2010-03-05 14:16 ` Stefano Babic
1 sibling, 1 reply; 116+ messages in thread
From: Tom @ 2010-03-05 14:00 UTC (permalink / raw)
To: u-boot
Stefano Babic wrote:
> Hi Tom,
>
> The following changes since commit f3651764e57e353251695691677bd95ba5a420bc:
> Frans Meulenbroeks (1):
> cmd_itest.c: fix pointer dereferencing
>
> are available in the git repository at:
>
> git://git.denx.de/u-boot-imx master
>
> John Rigby (5):
> mxc_serial replace platform specific clock
> Add support for Freescale MX25 SOC
> fec_mxc: cleanup and factor out MX27 dependencies
> fec_mxc: add MX25 support
> Add support for KARO TX25 board
>
> Stefano Babic (9):
> MX51: Add initial support for the Freescale MX51
> MX51: Add register definitions
> MX51: Add pin and multiplexer definitions.
> serial_mxc: add support for MX51 processor
> mmc: check correctness of the voltage mask in ocr
> MMC: add weak function to detect MMC/SD card
> ARM: add accessors functions
> fsl_esdhc: add support for mx51 processor
> Add initial support for Freescale mx51evk board
>
This has been applied to ARM/master
The fixes for the warning expected but not required.
Thanks,
Tom
> MAINTAINERS | 8 +
> MAKEALL | 1 +
> Makefile | 8 +
> board/freescale/mx51evk/Makefile | 48 ++++
> board/freescale/mx51evk/config.mk | 25 ++
> board/freescale/mx51evk/imximage.cfg | 119 +++++++++
> board/freescale/mx51evk/mx51evk.c | 406
> ++++++++++++++++++++++++++++
> board/freescale/mx51evk/mx51evk.h | 51 ++++
> board/karo/tx25/Makefile | 51 ++++
> board/karo/tx25/config.mk | 5 +
> board/karo/tx25/lowlevel_init.S | 131 +++++++++
> board/karo/tx25/tx25.c | 176 +++++++++++++
> cpu/arm926ejs/mx25/Makefile | 46 ++++
> cpu/arm926ejs/mx25/generic.c | 263 +++++++++++++++++++
> cpu/arm926ejs/mx25/reset.c | 56 ++++
> cpu/arm926ejs/mx25/timer.c | 187 +++++++++++++
> cpu/arm926ejs/mx27/generic.c | 5 +
> cpu/arm_cortexa8/mx51/Makefile | 48 ++++
> cpu/arm_cortexa8/mx51/clock.c | 293 +++++++++++++++++++++
> cpu/arm_cortexa8/mx51/iomux.c | 165 ++++++++++++
> cpu/arm_cortexa8/mx51/lowlevel_init.S | 289 ++++++++++++++++++++
> cpu/arm_cortexa8/mx51/soc.c | 109 ++++++++
> cpu/arm_cortexa8/mx51/speed.c | 38 +++
> cpu/arm_cortexa8/mx51/timer.c | 119 +++++++++
> cpu/arm_cortexa8/mx51/u-boot.lds | 61 +++++
> drivers/mmc/fsl_esdhc.c | 149 +++++++----
> drivers/mmc/mmc.c | 17 ++-
> drivers/net/fec_mxc.c | 44 +++-
> drivers/net/fec_mxc.h | 32 +++-
> drivers/serial/serial_mxc.c | 28 ++-
> include/asm-arm/arch-mx25/clock.h | 36 +++
> include/asm-arm/arch-mx25/imx-regs.h | 316 ++++++++++++++++++++++
> include/asm-arm/arch-mx25/imx25-pinmux.h | 421
> ++++++++++++++++++++++++++++++
> include/asm-arm/arch-mx27/clock.h | 3 +
> include/asm-arm/arch-mx31/mx31.h | 1 +
> include/asm-arm/arch-mx51/asm-offsets.h | 50 ++++
> include/asm-arm/arch-mx51/clock.h | 31 +++
> include/asm-arm/arch-mx51/crm_regs.h | 192 ++++++++++++++
> include/asm-arm/arch-mx51/imx-regs.h | 282 ++++++++++++++++++++
> include/asm-arm/arch-mx51/iomux.h | 193 ++++++++++++++
> include/asm-arm/arch-mx51/mx51_pins.h | 374 ++++++++++++++++++++++++++
> include/asm-arm/global_data.h | 3 +
> include/asm-arm/io.h | 55 ++++
> include/configs/mx51evk.h | 172 ++++++++++++
> include/configs/tx25.h | 179 +++++++++++++
> include/fsl_esdhc.h | 27 ++
> include/mmc.h | 1 +
> lib_arm/board.c | 3 +
> nand_spl/board/karo/tx25/Makefile | 78 ++++++
> nand_spl/board/karo/tx25/config.mk | 1 +
> nand_spl/board/karo/tx25/u-boot.lds | 58 ++++
> 51 files changed, 5386 insertions(+), 68 deletions(-)
> create mode 100644 board/freescale/mx51evk/Makefile
> create mode 100644 board/freescale/mx51evk/config.mk
> create mode 100644 board/freescale/mx51evk/imximage.cfg
> create mode 100644 board/freescale/mx51evk/mx51evk.c
> create mode 100644 board/freescale/mx51evk/mx51evk.h
> create mode 100644 board/karo/tx25/Makefile
> create mode 100644 board/karo/tx25/config.mk
> create mode 100644 board/karo/tx25/lowlevel_init.S
> create mode 100644 board/karo/tx25/tx25.c
> create mode 100644 cpu/arm926ejs/mx25/Makefile
> create mode 100644 cpu/arm926ejs/mx25/generic.c
> create mode 100644 cpu/arm926ejs/mx25/reset.c
> create mode 100644 cpu/arm926ejs/mx25/timer.c
> create mode 100644 cpu/arm_cortexa8/mx51/Makefile
> create mode 100644 cpu/arm_cortexa8/mx51/clock.c
> create mode 100644 cpu/arm_cortexa8/mx51/iomux.c
> create mode 100644 cpu/arm_cortexa8/mx51/lowlevel_init.S
> create mode 100644 cpu/arm_cortexa8/mx51/soc.c
> create mode 100644 cpu/arm_cortexa8/mx51/speed.c
> create mode 100644 cpu/arm_cortexa8/mx51/timer.c
> create mode 100644 cpu/arm_cortexa8/mx51/u-boot.lds
> create mode 100644 include/asm-arm/arch-mx25/clock.h
> create mode 100644 include/asm-arm/arch-mx25/imx-regs.h
> create mode 100644 include/asm-arm/arch-mx25/imx25-pinmux.h
> create mode 100644 include/asm-arm/arch-mx51/asm-offsets.h
> create mode 100644 include/asm-arm/arch-mx51/clock.h
> create mode 100644 include/asm-arm/arch-mx51/crm_regs.h
> create mode 100644 include/asm-arm/arch-mx51/imx-regs.h
> create mode 100644 include/asm-arm/arch-mx51/iomux.h
> create mode 100644 include/asm-arm/arch-mx51/mx51_pins.h
> create mode 100644 include/configs/mx51evk.h
> create mode 100644 include/configs/tx25.h
> create mode 100644 nand_spl/board/karo/tx25/Makefile
> create mode 100644 nand_spl/board/karo/tx25/config.mk
> create mode 100644 nand_spl/board/karo/tx25/u-boot.lds
>
^ permalink raw reply [flat|nested] 116+ messages in thread
* [U-Boot] [GIT PULL] Pull request: u-boot-imx
2010-03-02 18:45 Stefano Babic
@ 2010-03-04 16:03 ` Tom
2010-03-05 14:54 ` Stefano Babic
2010-03-05 14:00 ` Tom
1 sibling, 1 reply; 116+ messages in thread
From: Tom @ 2010-03-04 16:03 UTC (permalink / raw)
To: u-boot
There are some compiler warnings.
These should be resolved.
mx51evk.ERR
soc.c: In function 'print_cpuinfo':
soc.c:68: warning: implicit declaration of function 'get_mcu_main_clk'
soc.c: In function 'cpu_mmc_init':
soc.c:99: warning: implicit declaration of function 'fsl_esdhc_mmc_init'
clock.c:45: warning: initialization makes pointer from integer without a cast
speed.c: In function 'get_clocks':
speed.c:35: warning: implicit declaration of function 'mxc_get_clock'
mx51evk.c: In function 'board_init':
mx51evk.c:354: warning: implicit declaration of function 'get_cpu_rev'
Tom
Stefano Babic wrote:
> Hi Tom,
>
> The following changes since commit f3651764e57e353251695691677bd95ba5a420bc:
> Frans Meulenbroeks (1):
> cmd_itest.c: fix pointer dereferencing
>
> are available in the git repository at:
>
> git://git.denx.de/u-boot-imx master
>
> John Rigby (5):
> mxc_serial replace platform specific clock
> Add support for Freescale MX25 SOC
> fec_mxc: cleanup and factor out MX27 dependencies
> fec_mxc: add MX25 support
> Add support for KARO TX25 board
>
> Stefano Babic (9):
> MX51: Add initial support for the Freescale MX51
> MX51: Add register definitions
> MX51: Add pin and multiplexer definitions.
> serial_mxc: add support for MX51 processor
> mmc: check correctness of the voltage mask in ocr
> MMC: add weak function to detect MMC/SD card
> ARM: add accessors functions
> fsl_esdhc: add support for mx51 processor
> Add initial support for Freescale mx51evk board
>
> MAINTAINERS | 8 +
> MAKEALL | 1 +
> Makefile | 8 +
> board/freescale/mx51evk/Makefile | 48 ++++
> board/freescale/mx51evk/config.mk | 25 ++
> board/freescale/mx51evk/imximage.cfg | 119 +++++++++
> board/freescale/mx51evk/mx51evk.c | 406
> ++++++++++++++++++++++++++++
> board/freescale/mx51evk/mx51evk.h | 51 ++++
> board/karo/tx25/Makefile | 51 ++++
> board/karo/tx25/config.mk | 5 +
> board/karo/tx25/lowlevel_init.S | 131 +++++++++
> board/karo/tx25/tx25.c | 176 +++++++++++++
> cpu/arm926ejs/mx25/Makefile | 46 ++++
> cpu/arm926ejs/mx25/generic.c | 263 +++++++++++++++++++
> cpu/arm926ejs/mx25/reset.c | 56 ++++
> cpu/arm926ejs/mx25/timer.c | 187 +++++++++++++
> cpu/arm926ejs/mx27/generic.c | 5 +
> cpu/arm_cortexa8/mx51/Makefile | 48 ++++
> cpu/arm_cortexa8/mx51/clock.c | 293 +++++++++++++++++++++
> cpu/arm_cortexa8/mx51/iomux.c | 165 ++++++++++++
> cpu/arm_cortexa8/mx51/lowlevel_init.S | 289 ++++++++++++++++++++
> cpu/arm_cortexa8/mx51/soc.c | 109 ++++++++
> cpu/arm_cortexa8/mx51/speed.c | 38 +++
> cpu/arm_cortexa8/mx51/timer.c | 119 +++++++++
> cpu/arm_cortexa8/mx51/u-boot.lds | 61 +++++
> drivers/mmc/fsl_esdhc.c | 149 +++++++----
> drivers/mmc/mmc.c | 17 ++-
> drivers/net/fec_mxc.c | 44 +++-
> drivers/net/fec_mxc.h | 32 +++-
> drivers/serial/serial_mxc.c | 28 ++-
> include/asm-arm/arch-mx25/clock.h | 36 +++
> include/asm-arm/arch-mx25/imx-regs.h | 316 ++++++++++++++++++++++
> include/asm-arm/arch-mx25/imx25-pinmux.h | 421
> ++++++++++++++++++++++++++++++
> include/asm-arm/arch-mx27/clock.h | 3 +
> include/asm-arm/arch-mx31/mx31.h | 1 +
> include/asm-arm/arch-mx51/asm-offsets.h | 50 ++++
> include/asm-arm/arch-mx51/clock.h | 31 +++
> include/asm-arm/arch-mx51/crm_regs.h | 192 ++++++++++++++
> include/asm-arm/arch-mx51/imx-regs.h | 282 ++++++++++++++++++++
> include/asm-arm/arch-mx51/iomux.h | 193 ++++++++++++++
> include/asm-arm/arch-mx51/mx51_pins.h | 374 ++++++++++++++++++++++++++
> include/asm-arm/global_data.h | 3 +
> include/asm-arm/io.h | 55 ++++
> include/configs/mx51evk.h | 172 ++++++++++++
> include/configs/tx25.h | 179 +++++++++++++
> include/fsl_esdhc.h | 27 ++
> include/mmc.h | 1 +
> lib_arm/board.c | 3 +
> nand_spl/board/karo/tx25/Makefile | 78 ++++++
> nand_spl/board/karo/tx25/config.mk | 1 +
> nand_spl/board/karo/tx25/u-boot.lds | 58 ++++
> 51 files changed, 5386 insertions(+), 68 deletions(-)
> create mode 100644 board/freescale/mx51evk/Makefile
> create mode 100644 board/freescale/mx51evk/config.mk
> create mode 100644 board/freescale/mx51evk/imximage.cfg
> create mode 100644 board/freescale/mx51evk/mx51evk.c
> create mode 100644 board/freescale/mx51evk/mx51evk.h
> create mode 100644 board/karo/tx25/Makefile
> create mode 100644 board/karo/tx25/config.mk
> create mode 100644 board/karo/tx25/lowlevel_init.S
> create mode 100644 board/karo/tx25/tx25.c
> create mode 100644 cpu/arm926ejs/mx25/Makefile
> create mode 100644 cpu/arm926ejs/mx25/generic.c
> create mode 100644 cpu/arm926ejs/mx25/reset.c
> create mode 100644 cpu/arm926ejs/mx25/timer.c
> create mode 100644 cpu/arm_cortexa8/mx51/Makefile
> create mode 100644 cpu/arm_cortexa8/mx51/clock.c
> create mode 100644 cpu/arm_cortexa8/mx51/iomux.c
> create mode 100644 cpu/arm_cortexa8/mx51/lowlevel_init.S
> create mode 100644 cpu/arm_cortexa8/mx51/soc.c
> create mode 100644 cpu/arm_cortexa8/mx51/speed.c
> create mode 100644 cpu/arm_cortexa8/mx51/timer.c
> create mode 100644 cpu/arm_cortexa8/mx51/u-boot.lds
> create mode 100644 include/asm-arm/arch-mx25/clock.h
> create mode 100644 include/asm-arm/arch-mx25/imx-regs.h
> create mode 100644 include/asm-arm/arch-mx25/imx25-pinmux.h
> create mode 100644 include/asm-arm/arch-mx51/asm-offsets.h
> create mode 100644 include/asm-arm/arch-mx51/clock.h
> create mode 100644 include/asm-arm/arch-mx51/crm_regs.h
> create mode 100644 include/asm-arm/arch-mx51/imx-regs.h
> create mode 100644 include/asm-arm/arch-mx51/iomux.h
> create mode 100644 include/asm-arm/arch-mx51/mx51_pins.h
> create mode 100644 include/configs/mx51evk.h
> create mode 100644 include/configs/tx25.h
> create mode 100644 nand_spl/board/karo/tx25/Makefile
> create mode 100644 nand_spl/board/karo/tx25/config.mk
> create mode 100644 nand_spl/board/karo/tx25/u-boot.lds
>
^ permalink raw reply [flat|nested] 116+ messages in thread
* [U-Boot] [GIT PULL] Pull request: u-boot-imx
@ 2010-03-02 18:45 Stefano Babic
2010-03-04 16:03 ` Tom
2010-03-05 14:00 ` Tom
0 siblings, 2 replies; 116+ messages in thread
From: Stefano Babic @ 2010-03-02 18:45 UTC (permalink / raw)
To: u-boot
Hi Tom,
The following changes since commit f3651764e57e353251695691677bd95ba5a420bc:
Frans Meulenbroeks (1):
cmd_itest.c: fix pointer dereferencing
are available in the git repository at:
git://git.denx.de/u-boot-imx master
John Rigby (5):
mxc_serial replace platform specific clock
Add support for Freescale MX25 SOC
fec_mxc: cleanup and factor out MX27 dependencies
fec_mxc: add MX25 support
Add support for KARO TX25 board
Stefano Babic (9):
MX51: Add initial support for the Freescale MX51
MX51: Add register definitions
MX51: Add pin and multiplexer definitions.
serial_mxc: add support for MX51 processor
mmc: check correctness of the voltage mask in ocr
MMC: add weak function to detect MMC/SD card
ARM: add accessors functions
fsl_esdhc: add support for mx51 processor
Add initial support for Freescale mx51evk board
MAINTAINERS | 8 +
MAKEALL | 1 +
Makefile | 8 +
board/freescale/mx51evk/Makefile | 48 ++++
board/freescale/mx51evk/config.mk | 25 ++
board/freescale/mx51evk/imximage.cfg | 119 +++++++++
board/freescale/mx51evk/mx51evk.c | 406
++++++++++++++++++++++++++++
board/freescale/mx51evk/mx51evk.h | 51 ++++
board/karo/tx25/Makefile | 51 ++++
board/karo/tx25/config.mk | 5 +
board/karo/tx25/lowlevel_init.S | 131 +++++++++
board/karo/tx25/tx25.c | 176 +++++++++++++
cpu/arm926ejs/mx25/Makefile | 46 ++++
cpu/arm926ejs/mx25/generic.c | 263 +++++++++++++++++++
cpu/arm926ejs/mx25/reset.c | 56 ++++
cpu/arm926ejs/mx25/timer.c | 187 +++++++++++++
cpu/arm926ejs/mx27/generic.c | 5 +
cpu/arm_cortexa8/mx51/Makefile | 48 ++++
cpu/arm_cortexa8/mx51/clock.c | 293 +++++++++++++++++++++
cpu/arm_cortexa8/mx51/iomux.c | 165 ++++++++++++
cpu/arm_cortexa8/mx51/lowlevel_init.S | 289 ++++++++++++++++++++
cpu/arm_cortexa8/mx51/soc.c | 109 ++++++++
cpu/arm_cortexa8/mx51/speed.c | 38 +++
cpu/arm_cortexa8/mx51/timer.c | 119 +++++++++
cpu/arm_cortexa8/mx51/u-boot.lds | 61 +++++
drivers/mmc/fsl_esdhc.c | 149 +++++++----
drivers/mmc/mmc.c | 17 ++-
drivers/net/fec_mxc.c | 44 +++-
drivers/net/fec_mxc.h | 32 +++-
drivers/serial/serial_mxc.c | 28 ++-
include/asm-arm/arch-mx25/clock.h | 36 +++
include/asm-arm/arch-mx25/imx-regs.h | 316 ++++++++++++++++++++++
include/asm-arm/arch-mx25/imx25-pinmux.h | 421
++++++++++++++++++++++++++++++
include/asm-arm/arch-mx27/clock.h | 3 +
include/asm-arm/arch-mx31/mx31.h | 1 +
include/asm-arm/arch-mx51/asm-offsets.h | 50 ++++
include/asm-arm/arch-mx51/clock.h | 31 +++
include/asm-arm/arch-mx51/crm_regs.h | 192 ++++++++++++++
include/asm-arm/arch-mx51/imx-regs.h | 282 ++++++++++++++++++++
include/asm-arm/arch-mx51/iomux.h | 193 ++++++++++++++
include/asm-arm/arch-mx51/mx51_pins.h | 374 ++++++++++++++++++++++++++
include/asm-arm/global_data.h | 3 +
include/asm-arm/io.h | 55 ++++
include/configs/mx51evk.h | 172 ++++++++++++
include/configs/tx25.h | 179 +++++++++++++
include/fsl_esdhc.h | 27 ++
include/mmc.h | 1 +
lib_arm/board.c | 3 +
nand_spl/board/karo/tx25/Makefile | 78 ++++++
nand_spl/board/karo/tx25/config.mk | 1 +
nand_spl/board/karo/tx25/u-boot.lds | 58 ++++
51 files changed, 5386 insertions(+), 68 deletions(-)
create mode 100644 board/freescale/mx51evk/Makefile
create mode 100644 board/freescale/mx51evk/config.mk
create mode 100644 board/freescale/mx51evk/imximage.cfg
create mode 100644 board/freescale/mx51evk/mx51evk.c
create mode 100644 board/freescale/mx51evk/mx51evk.h
create mode 100644 board/karo/tx25/Makefile
create mode 100644 board/karo/tx25/config.mk
create mode 100644 board/karo/tx25/lowlevel_init.S
create mode 100644 board/karo/tx25/tx25.c
create mode 100644 cpu/arm926ejs/mx25/Makefile
create mode 100644 cpu/arm926ejs/mx25/generic.c
create mode 100644 cpu/arm926ejs/mx25/reset.c
create mode 100644 cpu/arm926ejs/mx25/timer.c
create mode 100644 cpu/arm_cortexa8/mx51/Makefile
create mode 100644 cpu/arm_cortexa8/mx51/clock.c
create mode 100644 cpu/arm_cortexa8/mx51/iomux.c
create mode 100644 cpu/arm_cortexa8/mx51/lowlevel_init.S
create mode 100644 cpu/arm_cortexa8/mx51/soc.c
create mode 100644 cpu/arm_cortexa8/mx51/speed.c
create mode 100644 cpu/arm_cortexa8/mx51/timer.c
create mode 100644 cpu/arm_cortexa8/mx51/u-boot.lds
create mode 100644 include/asm-arm/arch-mx25/clock.h
create mode 100644 include/asm-arm/arch-mx25/imx-regs.h
create mode 100644 include/asm-arm/arch-mx25/imx25-pinmux.h
create mode 100644 include/asm-arm/arch-mx51/asm-offsets.h
create mode 100644 include/asm-arm/arch-mx51/clock.h
create mode 100644 include/asm-arm/arch-mx51/crm_regs.h
create mode 100644 include/asm-arm/arch-mx51/imx-regs.h
create mode 100644 include/asm-arm/arch-mx51/iomux.h
create mode 100644 include/asm-arm/arch-mx51/mx51_pins.h
create mode 100644 include/configs/mx51evk.h
create mode 100644 include/configs/tx25.h
create mode 100644 nand_spl/board/karo/tx25/Makefile
create mode 100644 nand_spl/board/karo/tx25/config.mk
create mode 100644 nand_spl/board/karo/tx25/u-boot.lds
--
=====================================================================
DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: +49-8142-66989-0 Fax: +49-8142-66989-80 Email: office at denx.de
=====================================================================
^ permalink raw reply [flat|nested] 116+ messages in thread
end of thread, other threads:[~2012-09-29 9:48 UTC | newest]
Thread overview: 116+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2011-06-30 9:38 [U-Boot] [GIT PULL] Pull request: u-boot-imx Stefano Babic
2011-06-30 10:52 ` Albert ARIBAUD
-- strict thread matches above, loose matches on Subject: below --
2012-09-28 15:39 Stefano Babic
2012-09-29 9:48 ` Albert ARIBAUD
2012-09-17 13:53 Stefano Babic
2012-09-20 22:46 ` Albert ARIBAUD
2012-08-27 6:41 Stefano Babic
2012-09-01 12:57 ` Albert ARIBAUD
2012-08-07 16:00 Stefano Babic
2012-07-02 18:03 Stefano Babic
2012-07-05 8:23 ` Albert ARIBAUD
2012-05-09 16:38 Stefano Babic
2012-05-15 6:24 ` Albert ARIBAUD
2012-04-11 14:22 Stefano Babic
2012-04-16 13:04 ` Albert ARIBAUD
2012-03-08 7:52 Stefano Babic
2012-03-26 20:45 ` Albert ARIBAUD
2012-03-26 21:08 ` Albert ARIBAUD
2012-03-27 7:39 ` Stefano Babic
2012-03-03 11:38 Stefano Babic
2012-03-05 12:37 ` Albert ARIBAUD
2012-02-20 7:10 Stefano Babic
2012-02-20 7:54 ` Albert ARIBAUD
2012-02-12 16:06 Stefano Babic
2012-02-13 8:03 ` Albert ARIBAUD
2012-01-22 13:06 Stefano Babic
2012-02-04 16:57 ` Albert ARIBAUD
2012-02-05 13:32 ` Stefano Babic
2012-01-04 16:57 Stefano Babic
2012-01-04 17:41 ` Fabio Estevam
2012-01-04 17:56 ` Stefano Babic
2012-01-12 22:01 ` Albert ARIBAUD
2011-12-19 7:45 Stefano Babic
2011-12-19 8:39 ` Albert ARIBAUD
2011-12-09 14:34 Stefano Babic
2011-12-09 16:40 ` Albert ARIBAUD
2011-12-05 17:22 Stefano Babic
2011-12-05 17:27 ` Albert ARIBAUD
2011-12-01 16:14 Stefano Babic
2011-12-05 16:57 ` Albert ARIBAUD
2011-12-05 17:19 ` Stefano Babic
2011-11-11 10:40 Stefano Babic
2011-11-15 21:24 ` Albert ARIBAUD
2011-11-04 6:47 Stefano Babic
2011-11-04 21:11 ` Albert ARIBAUD
2011-10-28 12:37 Stefano Babic
2011-10-28 15:20 ` Albert ARIBAUD
2011-10-17 8:05 Stefano Babic
2011-10-18 18:12 ` Albert ARIBAUD
2011-10-19 9:30 ` Stefano Babic
2011-10-19 11:25 ` Albert ARIBAUD
2011-09-08 14:34 Stefano Babic
2011-09-08 14:59 ` Albert ARIBAUD
2011-08-26 14:23 Stefano Babic
2011-08-30 9:18 ` Albert ARIBAUD
2011-08-26 9:31 Stefano Babic
2011-08-26 9:38 ` Stefano Babic
2011-08-12 14:08 Stefano Babic
2011-08-12 17:53 ` Albert ARIBAUD
2011-07-18 12:45 Stefano Babic
2011-07-18 13:38 ` Albert ARIBAUD
2011-07-13 14:25 Stefano Babic
2011-07-14 13:42 ` Albert ARIBAUD
2011-06-15 9:28 Stefano Babic
2011-06-17 19:24 ` Albert ARIBAUD
2011-06-17 19:37 ` Albert ARIBAUD
2011-06-18 9:59 ` Stefano Babic
2011-06-18 11:11 ` Albert ARIBAUD
2011-06-08 11:36 Stefano Babic
2011-06-08 20:08 ` Albert ARIBAUD
2011-05-20 15:58 Stefano Babic
2011-05-20 18:35 ` Albert ARIBAUD
2011-05-09 11:49 Stefano Babic
2011-05-10 21:55 ` Albert ARIBAUD
2011-05-11 5:50 ` Stefano Babic
2011-05-11 20:56 ` Albert ARIBAUD
2011-05-11 20:58 ` Albert ARIBAUD
2011-04-22 12:50 Stefano Babic
2011-04-05 13:29 Stefano Babic
2011-04-05 17:13 ` Albert ARIBAUD
2011-02-13 9:56 Stefano Babic
2011-02-13 11:25 ` Albert ARIBAUD
2011-02-13 11:57 ` Albert ARIBAUD
2011-02-01 18:13 Stefano Babic
2011-02-01 23:58 ` Albert ARIBAUD
2011-01-21 9:24 Stefano Babic
2011-01-21 17:33 ` Albert ARIBAUD
2011-01-13 6:40 Stefano Babic
2011-01-13 7:20 ` Albert ARIBAUD
2011-01-13 7:23 ` Stefano Babic
2011-01-13 21:30 ` Albert ARIBAUD
2011-01-17 19:10 ` Wolfgang Denk
2011-01-17 19:30 ` Stefano Babic
2010-12-09 10:05 stefano babic
2010-12-09 19:54 ` Wolfgang Denk
2010-10-28 11:25 Stefano Babic
2010-10-29 19:50 ` Wolfgang Denk
2010-10-19 14:09 Stefano Babic
2010-10-19 18:58 ` Wolfgang Denk
2010-10-14 8:42 Stefano Babic
2010-10-17 17:57 ` Wolfgang Denk
2010-10-07 8:28 Stefano Babic
2010-10-11 8:23 ` Wolfgang Denk
[not found] <4BE12AA5.8020605@denx.de>
2010-05-11 15:04 ` Tom Rix
2010-05-05 8:15 Stefano Babic
2010-04-19 13:52 Stefano Babic
2010-04-06 9:38 Stefano Babic
2010-04-18 11:45 ` Tom Rix
2010-03-02 18:45 Stefano Babic
2010-03-04 16:03 ` Tom
2010-03-05 14:54 ` Stefano Babic
2010-03-05 17:24 ` Stefano Babic
2010-03-05 14:00 ` Tom
2010-03-05 14:16 ` Stefano Babic
2010-03-05 14:40 ` Tom
2010-03-05 14:48 ` Stefano Babic
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.