* [PATCH] dbus: update to 1.4.12
@ 2011-06-23 12:32 Koen Kooi
2011-06-30 23:24 ` Saul Wold
0 siblings, 1 reply; 2+ messages in thread
From: Koen Kooi @ 2011-06-23 12:32 UTC (permalink / raw)
To: openembedded-core; +Cc: Koen Kooi
[-- Warning: decoded text below may be mangled, UTF-8 assumed --]
[-- Attachment #1: Type: text/plain, Size: 11496 bytes --]
The tmpdir patch has been regenerated and can now be applied with git-am, no functional changes.
The biggest improvement is that dbus will log to syslog nowadays:
[ 22.238708] <29>dbus[237]: [system] Activating service name='fi.w1.wpa_supplicant1' (using servicehelper)
Signed-off-by: Koen Kooi <koen@dominion.thruhere.net>
---
meta/recipes-core/dbus/dbus-1.4.1/dbus-1.init | 121 -----------------------
meta/recipes-core/dbus/dbus-1.4.1/tmpdir.patch | 36 -------
meta/recipes-core/dbus/dbus-1.4.12/dbus-1.init | 121 +++++++++++++++++++++++
meta/recipes-core/dbus/dbus-1.4.12/tmpdir.patch | 44 ++++++++
meta/recipes-core/dbus/dbus_1.4.1.bb | 6 -
meta/recipes-core/dbus/dbus_1.4.12.bb | 4 +
6 files changed, 169 insertions(+), 163 deletions(-)
delete mode 100644 meta/recipes-core/dbus/dbus-1.4.1/dbus-1.init
delete mode 100644 meta/recipes-core/dbus/dbus-1.4.1/tmpdir.patch
create mode 100644 meta/recipes-core/dbus/dbus-1.4.12/dbus-1.init
create mode 100644 meta/recipes-core/dbus/dbus-1.4.12/tmpdir.patch
delete mode 100644 meta/recipes-core/dbus/dbus_1.4.1.bb
create mode 100644 meta/recipes-core/dbus/dbus_1.4.12.bb
diff --git a/meta/recipes-core/dbus/dbus-1.4.1/dbus-1.init b/meta/recipes-core/dbus/dbus-1.4.1/dbus-1.init
deleted file mode 100644
index 4abc4cb..0000000
--- a/meta/recipes-core/dbus/dbus-1.4.1/dbus-1.init
+++ /dev/null
@@ -1,121 +0,0 @@
-#! /bin/sh
-### BEGIN INIT INFO
-# Provides: dbus
-# Required-Start: $remote_fs $syslog
-# Required-Stop: $remote_fs $syslog
-# Default-Start: 2 3 4 5
-# Default-Stop: 1
-# Short-Description: D-Bus systemwide message bus
-# Description: D-Bus is a simple interprocess messaging system, used
-# for sending messages between applications.
-### END INIT INFO
-#
-# -*- coding: utf-8 -*-
-# Debian init.d script for D-BUS
-# Copyright © 2003 Colin Walters <walters@debian.org>
-
-set -e
-
-DAEMON=/usr/bin/dbus-daemon
-NAME=dbus
-DAEMONUSER=messagebus
-PIDDIR=/var/run/dbus
-PIDFILE=$PIDDIR/pid
-UUIDDIR=/var/lib/dbus
-DESC="system message bus"
-EVENTDIR=/etc/dbus-1/event.d
-
-test -x $DAEMON || exit 0
-
-# Source defaults file; edit that file to configure this script.
-ENABLED=1
-PARAMS=""
-if [ -e /etc/default/dbus ]; then
- . /etc/default/dbus
-fi
-
-test "$ENABLED" != "0" || exit 0
-
-start_it_up()
-{
- if [ ! -d $PIDDIR ]; then
- mkdir -p $PIDDIR
- chown $DAEMONUSER $PIDDIR
- chgrp $DAEMONUSER $PIDDIR
- fi
- if [ -e $PIDFILE ]; then
- PIDDIR=/proc/$(cat $PIDFILE)
- if [ -d ${PIDDIR} -a "$(readlink -f ${PIDDIR}/exe)" = "${DAEMON}" ]; then
- echo "$DESC already started; not starting."
- else
- echo "Removing stale PID file $PIDFILE."
- rm -f $PIDFILE
- fi
- fi
-
- if [ ! -d $UUIDDIR ]; then
- mkdir -p $UUIDDIR
- chown $DAEMONUSER $UUIDDIR
- chgrp $DAEMONUSER $UUIDDIR
- fi
-
- dbus-uuidgen --ensure
-
- echo -n "Starting $DESC: "
- start-stop-daemon --start --quiet --pidfile $PIDFILE \
- --user $DAEMONUSER --exec $DAEMON -- --system $PARAMS
- echo "$NAME."
- if [ -d $EVENTDIR ]; then
- run-parts --arg=start $EVENTDIR
- fi
-}
-
-shut_it_down()
-{
- if [ -d $EVENTDIR ]; then
- # TODO: --reverse when busybox supports it
- run-parts --arg=stop $EVENTDIR
- fi
- echo -n "Stopping $DESC: "
- start-stop-daemon --stop --quiet --pidfile $PIDFILE \
- --user $DAEMONUSER
- # We no longer include these arguments so that start-stop-daemon
- # can do its job even given that we may have been upgraded.
- # We rely on the pidfile being sanely managed
- # --exec $DAEMON -- --system $PARAMS
- echo "$NAME."
- rm -f $PIDFILE
-}
-
-reload_it()
-{
- echo -n "Reloading $DESC config: "
- dbus-send --print-reply --system --type=method_call \
- --dest=org.freedesktop.DBus \
- / org.freedesktop.DBus.ReloadConfig > /dev/null
- # hopefully this is enough time for dbus to reload it's config file.
- echo "done."
-}
-
-case "$1" in
- start)
- start_it_up
- ;;
- stop)
- shut_it_down
- ;;
- reload|force-reload)
- reload_it
- ;;
- restart)
- shut_it_down
- sleep 1
- start_it_up
- ;;
- *)
- echo "Usage: /etc/init.d/$NAME {start|stop|restart|reload|force-reload}" >&2
- exit 1
- ;;
-esac
-
-exit 0
diff --git a/meta/recipes-core/dbus/dbus-1.4.1/tmpdir.patch b/meta/recipes-core/dbus/dbus-1.4.1/tmpdir.patch
deleted file mode 100644
index de0766a..0000000
--- a/meta/recipes-core/dbus/dbus-1.4.1/tmpdir.patch
+++ /dev/null
@@ -1,36 +0,0 @@
-Upstream-Status: Inappropriate [embedded]
-
-# avoid to check tmp dir at build time. instead uses hard coded /tmp here
-#
-# comment added by Kevin Tian <kevin.tian@intel.com>
-
---- dbus-0.22/configure.in.orig 2004-08-13 00:57:16.000000000 +0200
-+++ dbus-0.22/configure.in 2004-12-30 21:15:57.000000000 +0100
-@@ -1047,15 +1048,18 @@
- AC_SUBST(ABSOLUTE_TOP_BUILDDIR)
-
- #### Find socket directories
--if ! test -z "$TMPDIR" ; then
-- DEFAULT_SOCKET_DIR=$TMPDIR
--elif ! test -z "$TEMP" ; then
-- DEFAULT_SOCKET_DIR=$TEMP
--elif ! test -z "$TMP" ; then
-- DEFAULT_SOCKET_DIR=$TMP
--else
-- DEFAULT_SOCKET_DIR=/tmp
--fi
-+#if ! test -z "$TMPDIR" ; then
-+# DEFAULT_SOCKET_DIR=$TMPDIR
-+#elif ! test -z "$TEMP" ; then
-+# DEFAULT_SOCKET_DIR=$TEMP
-+#elif ! test -z "$TMP" ; then
-+# DEFAULT_SOCKET_DIR=$TMP
-+#else
-+# DEFAULT_SOCKET_DIR=/tmp
-+#fi
-+
-+# checks disabled to avoid expanding this at build time
-+DEFAULT_SOCKET_DIR=/tmp
-
- if ! test -z "$with_test_socket_dir" ; then
- TEST_SOCKET_DIR="$with_test_socket_dir"
diff --git a/meta/recipes-core/dbus/dbus-1.4.12/dbus-1.init b/meta/recipes-core/dbus/dbus-1.4.12/dbus-1.init
new file mode 100644
index 0000000..4abc4cb
--- /dev/null
+++ b/meta/recipes-core/dbus/dbus-1.4.12/dbus-1.init
@@ -0,0 +1,121 @@
+#! /bin/sh
+### BEGIN INIT INFO
+# Provides: dbus
+# Required-Start: $remote_fs $syslog
+# Required-Stop: $remote_fs $syslog
+# Default-Start: 2 3 4 5
+# Default-Stop: 1
+# Short-Description: D-Bus systemwide message bus
+# Description: D-Bus is a simple interprocess messaging system, used
+# for sending messages between applications.
+### END INIT INFO
+#
+# -*- coding: utf-8 -*-
+# Debian init.d script for D-BUS
+# Copyright © 2003 Colin Walters <walters@debian.org>
+
+set -e
+
+DAEMON=/usr/bin/dbus-daemon
+NAME=dbus
+DAEMONUSER=messagebus
+PIDDIR=/var/run/dbus
+PIDFILE=$PIDDIR/pid
+UUIDDIR=/var/lib/dbus
+DESC="system message bus"
+EVENTDIR=/etc/dbus-1/event.d
+
+test -x $DAEMON || exit 0
+
+# Source defaults file; edit that file to configure this script.
+ENABLED=1
+PARAMS=""
+if [ -e /etc/default/dbus ]; then
+ . /etc/default/dbus
+fi
+
+test "$ENABLED" != "0" || exit 0
+
+start_it_up()
+{
+ if [ ! -d $PIDDIR ]; then
+ mkdir -p $PIDDIR
+ chown $DAEMONUSER $PIDDIR
+ chgrp $DAEMONUSER $PIDDIR
+ fi
+ if [ -e $PIDFILE ]; then
+ PIDDIR=/proc/$(cat $PIDFILE)
+ if [ -d ${PIDDIR} -a "$(readlink -f ${PIDDIR}/exe)" = "${DAEMON}" ]; then
+ echo "$DESC already started; not starting."
+ else
+ echo "Removing stale PID file $PIDFILE."
+ rm -f $PIDFILE
+ fi
+ fi
+
+ if [ ! -d $UUIDDIR ]; then
+ mkdir -p $UUIDDIR
+ chown $DAEMONUSER $UUIDDIR
+ chgrp $DAEMONUSER $UUIDDIR
+ fi
+
+ dbus-uuidgen --ensure
+
+ echo -n "Starting $DESC: "
+ start-stop-daemon --start --quiet --pidfile $PIDFILE \
+ --user $DAEMONUSER --exec $DAEMON -- --system $PARAMS
+ echo "$NAME."
+ if [ -d $EVENTDIR ]; then
+ run-parts --arg=start $EVENTDIR
+ fi
+}
+
+shut_it_down()
+{
+ if [ -d $EVENTDIR ]; then
+ # TODO: --reverse when busybox supports it
+ run-parts --arg=stop $EVENTDIR
+ fi
+ echo -n "Stopping $DESC: "
+ start-stop-daemon --stop --quiet --pidfile $PIDFILE \
+ --user $DAEMONUSER
+ # We no longer include these arguments so that start-stop-daemon
+ # can do its job even given that we may have been upgraded.
+ # We rely on the pidfile being sanely managed
+ # --exec $DAEMON -- --system $PARAMS
+ echo "$NAME."
+ rm -f $PIDFILE
+}
+
+reload_it()
+{
+ echo -n "Reloading $DESC config: "
+ dbus-send --print-reply --system --type=method_call \
+ --dest=org.freedesktop.DBus \
+ / org.freedesktop.DBus.ReloadConfig > /dev/null
+ # hopefully this is enough time for dbus to reload it's config file.
+ echo "done."
+}
+
+case "$1" in
+ start)
+ start_it_up
+ ;;
+ stop)
+ shut_it_down
+ ;;
+ reload|force-reload)
+ reload_it
+ ;;
+ restart)
+ shut_it_down
+ sleep 1
+ start_it_up
+ ;;
+ *)
+ echo "Usage: /etc/init.d/$NAME {start|stop|restart|reload|force-reload}" >&2
+ exit 1
+ ;;
+esac
+
+exit 0
diff --git a/meta/recipes-core/dbus/dbus-1.4.12/tmpdir.patch b/meta/recipes-core/dbus/dbus-1.4.12/tmpdir.patch
new file mode 100644
index 0000000..bf086e1
--- /dev/null
+++ b/meta/recipes-core/dbus/dbus-1.4.12/tmpdir.patch
@@ -0,0 +1,44 @@
+From 5105fedd7fa13dadd2d0d864fb77873b83b79a4b Mon Sep 17 00:00:00 2001
+From: Koen Kooi <koen@dominion.thruhere.net>
+Date: Thu, 23 Jun 2011 13:52:09 +0200
+Subject: [PATCH] buildsys: hardcode socketdir to /tmp
+
+the TMPDIR env var isn't always pointing to the right target path
+
+Upstream-Status: Inappropriate [embedded]
+
+Signed-off-by: Koen Kooi <koen@dominion.thruhere.net>
+
+Original comment:
+
+ avoid to check tmp dir at build time. instead uses hard coded /tmp here
+ comment added by Kevin Tian <kevin.tian@intel.com>
+---
+ configure.ac | 11 +----------
+ 1 files changed, 1 insertions(+), 10 deletions(-)
+
+diff --git a/configure.ac b/configure.ac
+index 408054b..6d26180 100644
+--- a/configure.ac
++++ b/configure.ac
+@@ -1483,16 +1483,7 @@ AC_SUBST(TEST_LAUNCH_HELPER_BINARY)
+ AC_DEFINE_UNQUOTED(DBUS_TEST_LAUNCH_HELPER_BINARY, "$TEST_LAUNCH_HELPER_BINARY",
+ [Full path to the launch helper test program in the builddir])
+
+-#### Find socket directories
+-if ! test -z "$TMPDIR" ; then
+- DEFAULT_SOCKET_DIR=$TMPDIR
+-elif ! test -z "$TEMP" ; then
+- DEFAULT_SOCKET_DIR=$TEMP
+-elif ! test -z "$TMP" ; then
+- DEFAULT_SOCKET_DIR=$TMP
+-else
+- DEFAULT_SOCKET_DIR=/tmp
+-fi
++DEFAULT_SOCKET_DIR=/tmp
+
+ DEFAULT_SOCKET_DIR=`echo $DEFAULT_SOCKET_DIR | sed 's/+/%2B/g'`
+
+--
+1.6.6.1
+
diff --git a/meta/recipes-core/dbus/dbus_1.4.1.bb b/meta/recipes-core/dbus/dbus_1.4.1.bb
deleted file mode 100644
index 252d160..0000000
--- a/meta/recipes-core/dbus/dbus_1.4.1.bb
+++ /dev/null
@@ -1,6 +0,0 @@
-include dbus.inc
-
-PR = "r6"
-
-SRC_URI[md5sum] = "99cb057700c0455fb68f8d57902f77ac"
-SRC_URI[sha256sum] = "caa1a0ded2d0f2e95c1d4ec7e3c8bd44834928c5b0ed41a7189963f3593983bd"
diff --git a/meta/recipes-core/dbus/dbus_1.4.12.bb b/meta/recipes-core/dbus/dbus_1.4.12.bb
new file mode 100644
index 0000000..ada53c9
--- /dev/null
+++ b/meta/recipes-core/dbus/dbus_1.4.12.bb
@@ -0,0 +1,4 @@
+include dbus.inc
+SRC_URI[md5sum] = "104f2ea94c10a896dfb1edecb5714cb1"
+SRC_URI[sha256sum] = "da3c97fd546610558d588799e27c4fa81101e754acbcd34747a42c131f30dbe7"
+
--
1.6.6.1
^ permalink raw reply related [flat|nested] 2+ messages in thread
* Re: [PATCH] dbus: update to 1.4.12
2011-06-23 12:32 [PATCH] dbus: update to 1.4.12 Koen Kooi
@ 2011-06-30 23:24 ` Saul Wold
0 siblings, 0 replies; 2+ messages in thread
From: Saul Wold @ 2011-06-30 23:24 UTC (permalink / raw)
To: Patches and discussions about the oe-core layer; +Cc: Koen Kooi
On 06/23/2011 05:32 AM, Koen Kooi wrote:
> The tmpdir patch has been regenerated and can now be applied with git-am, no functional changes.
>
> The biggest improvement is that dbus will log to syslog nowadays:
>
> [ 22.238708]<29>dbus[237]: [system] Activating service name='fi.w1.wpa_supplicant1' (using servicehelper)
>
> Signed-off-by: Koen Kooi<koen@dominion.thruhere.net>
> ---
> meta/recipes-core/dbus/dbus-1.4.1/dbus-1.init | 121 -----------------------
> meta/recipes-core/dbus/dbus-1.4.1/tmpdir.patch | 36 -------
> meta/recipes-core/dbus/dbus-1.4.12/dbus-1.init | 121 +++++++++++++++++++++++
> meta/recipes-core/dbus/dbus-1.4.12/tmpdir.patch | 44 ++++++++
> meta/recipes-core/dbus/dbus_1.4.1.bb | 6 -
> meta/recipes-core/dbus/dbus_1.4.12.bb | 4 +
> 6 files changed, 169 insertions(+), 163 deletions(-)
> delete mode 100644 meta/recipes-core/dbus/dbus-1.4.1/dbus-1.init
> delete mode 100644 meta/recipes-core/dbus/dbus-1.4.1/tmpdir.patch
> create mode 100644 meta/recipes-core/dbus/dbus-1.4.12/dbus-1.init
> create mode 100644 meta/recipes-core/dbus/dbus-1.4.12/tmpdir.patch
> delete mode 100644 meta/recipes-core/dbus/dbus_1.4.1.bb
> create mode 100644 meta/recipes-core/dbus/dbus_1.4.12.bb
>
> diff --git a/meta/recipes-core/dbus/dbus-1.4.1/dbus-1.init b/meta/recipes-core/dbus/dbus-1.4.1/dbus-1.init
> deleted file mode 100644
> index 4abc4cb..0000000
> --- a/meta/recipes-core/dbus/dbus-1.4.1/dbus-1.init
> +++ /dev/null
> @@ -1,121 +0,0 @@
> -#! /bin/sh
> -### BEGIN INIT INFO
> -# Provides: dbus
> -# Required-Start: $remote_fs $syslog
> -# Required-Stop: $remote_fs $syslog
> -# Default-Start: 2 3 4 5
> -# Default-Stop: 1
> -# Short-Description: D-Bus systemwide message bus
> -# Description: D-Bus is a simple interprocess messaging system, used
> -# for sending messages between applications.
> -### END INIT INFO
> -#
> -# -*- coding: utf-8 -*-
> -# Debian init.d script for D-BUS
> -# Copyright © 2003 Colin Walters<walters@debian.org>
> -
> -set -e
> -
> -DAEMON=/usr/bin/dbus-daemon
> -NAME=dbus
> -DAEMONUSER=messagebus
> -PIDDIR=/var/run/dbus
> -PIDFILE=$PIDDIR/pid
> -UUIDDIR=/var/lib/dbus
> -DESC="system message bus"
> -EVENTDIR=/etc/dbus-1/event.d
> -
> -test -x $DAEMON || exit 0
> -
> -# Source defaults file; edit that file to configure this script.
> -ENABLED=1
> -PARAMS=""
> -if [ -e /etc/default/dbus ]; then
> - . /etc/default/dbus
> -fi
> -
> -test "$ENABLED" != "0" || exit 0
> -
> -start_it_up()
> -{
> - if [ ! -d $PIDDIR ]; then
> - mkdir -p $PIDDIR
> - chown $DAEMONUSER $PIDDIR
> - chgrp $DAEMONUSER $PIDDIR
> - fi
> - if [ -e $PIDFILE ]; then
> - PIDDIR=/proc/$(cat $PIDFILE)
> - if [ -d ${PIDDIR} -a "$(readlink -f ${PIDDIR}/exe)" = "${DAEMON}" ]; then
> - echo "$DESC already started; not starting."
> - else
> - echo "Removing stale PID file $PIDFILE."
> - rm -f $PIDFILE
> - fi
> - fi
> -
> - if [ ! -d $UUIDDIR ]; then
> - mkdir -p $UUIDDIR
> - chown $DAEMONUSER $UUIDDIR
> - chgrp $DAEMONUSER $UUIDDIR
> - fi
> -
> - dbus-uuidgen --ensure
> -
> - echo -n "Starting $DESC: "
> - start-stop-daemon --start --quiet --pidfile $PIDFILE \
> - --user $DAEMONUSER --exec $DAEMON -- --system $PARAMS
> - echo "$NAME."
> - if [ -d $EVENTDIR ]; then
> - run-parts --arg=start $EVENTDIR
> - fi
> -}
> -
> -shut_it_down()
> -{
> - if [ -d $EVENTDIR ]; then
> - # TODO: --reverse when busybox supports it
> - run-parts --arg=stop $EVENTDIR
> - fi
> - echo -n "Stopping $DESC: "
> - start-stop-daemon --stop --quiet --pidfile $PIDFILE \
> - --user $DAEMONUSER
> - # We no longer include these arguments so that start-stop-daemon
> - # can do its job even given that we may have been upgraded.
> - # We rely on the pidfile being sanely managed
> - # --exec $DAEMON -- --system $PARAMS
> - echo "$NAME."
> - rm -f $PIDFILE
> -}
> -
> -reload_it()
> -{
> - echo -n "Reloading $DESC config: "
> - dbus-send --print-reply --system --type=method_call \
> - --dest=org.freedesktop.DBus \
> - / org.freedesktop.DBus.ReloadConfig> /dev/null
> - # hopefully this is enough time for dbus to reload it's config file.
> - echo "done."
> -}
> -
> -case "$1" in
> - start)
> - start_it_up
> - ;;
> - stop)
> - shut_it_down
> - ;;
> - reload|force-reload)
> - reload_it
> - ;;
> - restart)
> - shut_it_down
> - sleep 1
> - start_it_up
> - ;;
> - *)
> - echo "Usage: /etc/init.d/$NAME {start|stop|restart|reload|force-reload}">&2
> - exit 1
> - ;;
> -esac
> -
> -exit 0
> diff --git a/meta/recipes-core/dbus/dbus-1.4.1/tmpdir.patch b/meta/recipes-core/dbus/dbus-1.4.1/tmpdir.patch
> deleted file mode 100644
> index de0766a..0000000
> --- a/meta/recipes-core/dbus/dbus-1.4.1/tmpdir.patch
> +++ /dev/null
> @@ -1,36 +0,0 @@
> -Upstream-Status: Inappropriate [embedded]
> -
> -# avoid to check tmp dir at build time. instead uses hard coded /tmp here
> -#
> -# comment added by Kevin Tian<kevin.tian@intel.com>
> -
> ---- dbus-0.22/configure.in.orig 2004-08-13 00:57:16.000000000 +0200
> -+++ dbus-0.22/configure.in 2004-12-30 21:15:57.000000000 +0100
> -@@ -1047,15 +1048,18 @@
> - AC_SUBST(ABSOLUTE_TOP_BUILDDIR)
> -
> - #### Find socket directories
> --if ! test -z "$TMPDIR" ; then
> -- DEFAULT_SOCKET_DIR=$TMPDIR
> --elif ! test -z "$TEMP" ; then
> -- DEFAULT_SOCKET_DIR=$TEMP
> --elif ! test -z "$TMP" ; then
> -- DEFAULT_SOCKET_DIR=$TMP
> --else
> -- DEFAULT_SOCKET_DIR=/tmp
> --fi
> -+#if ! test -z "$TMPDIR" ; then
> -+# DEFAULT_SOCKET_DIR=$TMPDIR
> -+#elif ! test -z "$TEMP" ; then
> -+# DEFAULT_SOCKET_DIR=$TEMP
> -+#elif ! test -z "$TMP" ; then
> -+# DEFAULT_SOCKET_DIR=$TMP
> -+#else
> -+# DEFAULT_SOCKET_DIR=/tmp
> -+#fi
> -+
> -+# checks disabled to avoid expanding this at build time
> -+DEFAULT_SOCKET_DIR=/tmp
> -
> - if ! test -z "$with_test_socket_dir" ; then
> - TEST_SOCKET_DIR="$with_test_socket_dir"
> diff --git a/meta/recipes-core/dbus/dbus-1.4.12/dbus-1.init b/meta/recipes-core/dbus/dbus-1.4.12/dbus-1.init
> new file mode 100644
> index 0000000..4abc4cb
> --- /dev/null
> +++ b/meta/recipes-core/dbus/dbus-1.4.12/dbus-1.init
> @@ -0,0 +1,121 @@
> +#! /bin/sh
> +### BEGIN INIT INFO
> +# Provides: dbus
> +# Required-Start: $remote_fs $syslog
> +# Required-Stop: $remote_fs $syslog
> +# Default-Start: 2 3 4 5
> +# Default-Stop: 1
> +# Short-Description: D-Bus systemwide message bus
> +# Description: D-Bus is a simple interprocess messaging system, used
> +# for sending messages between applications.
> +### END INIT INFO
> +#
> +# -*- coding: utf-8 -*-
> +# Debian init.d script for D-BUS
> +# Copyright © 2003 Colin Walters<walters@debian.org>
> +
> +set -e
> +
> +DAEMON=/usr/bin/dbus-daemon
> +NAME=dbus
> +DAEMONUSER=messagebus
> +PIDDIR=/var/run/dbus
> +PIDFILE=$PIDDIR/pid
> +UUIDDIR=/var/lib/dbus
> +DESC="system message bus"
> +EVENTDIR=/etc/dbus-1/event.d
> +
> +test -x $DAEMON || exit 0
> +
> +# Source defaults file; edit that file to configure this script.
> +ENABLED=1
> +PARAMS=""
> +if [ -e /etc/default/dbus ]; then
> + . /etc/default/dbus
> +fi
> +
> +test "$ENABLED" != "0" || exit 0
> +
> +start_it_up()
> +{
> + if [ ! -d $PIDDIR ]; then
> + mkdir -p $PIDDIR
> + chown $DAEMONUSER $PIDDIR
> + chgrp $DAEMONUSER $PIDDIR
> + fi
> + if [ -e $PIDFILE ]; then
> + PIDDIR=/proc/$(cat $PIDFILE)
> + if [ -d ${PIDDIR} -a "$(readlink -f ${PIDDIR}/exe)" = "${DAEMON}" ]; then
> + echo "$DESC already started; not starting."
> + else
> + echo "Removing stale PID file $PIDFILE."
> + rm -f $PIDFILE
> + fi
> + fi
> +
> + if [ ! -d $UUIDDIR ]; then
> + mkdir -p $UUIDDIR
> + chown $DAEMONUSER $UUIDDIR
> + chgrp $DAEMONUSER $UUIDDIR
> + fi
> +
> + dbus-uuidgen --ensure
> +
> + echo -n "Starting $DESC: "
> + start-stop-daemon --start --quiet --pidfile $PIDFILE \
> + --user $DAEMONUSER --exec $DAEMON -- --system $PARAMS
> + echo "$NAME."
> + if [ -d $EVENTDIR ]; then
> + run-parts --arg=start $EVENTDIR
> + fi
> +}
> +
> +shut_it_down()
> +{
> + if [ -d $EVENTDIR ]; then
> + # TODO: --reverse when busybox supports it
> + run-parts --arg=stop $EVENTDIR
> + fi
> + echo -n "Stopping $DESC: "
> + start-stop-daemon --stop --quiet --pidfile $PIDFILE \
> + --user $DAEMONUSER
> + # We no longer include these arguments so that start-stop-daemon
> + # can do its job even given that we may have been upgraded.
> + # We rely on the pidfile being sanely managed
> + # --exec $DAEMON -- --system $PARAMS
> + echo "$NAME."
> + rm -f $PIDFILE
> +}
> +
> +reload_it()
> +{
> + echo -n "Reloading $DESC config: "
> + dbus-send --print-reply --system --type=method_call \
> + --dest=org.freedesktop.DBus \
> + / org.freedesktop.DBus.ReloadConfig> /dev/null
> + # hopefully this is enough time for dbus to reload it's config file.
> + echo "done."
> +}
> +
> +case "$1" in
> + start)
> + start_it_up
> + ;;
> + stop)
> + shut_it_down
> + ;;
> + reload|force-reload)
> + reload_it
> + ;;
> + restart)
> + shut_it_down
> + sleep 1
> + start_it_up
> + ;;
> + *)
> + echo "Usage: /etc/init.d/$NAME {start|stop|restart|reload|force-reload}">&2
> + exit 1
> + ;;
> +esac
> +
> +exit 0
> diff --git a/meta/recipes-core/dbus/dbus-1.4.12/tmpdir.patch b/meta/recipes-core/dbus/dbus-1.4.12/tmpdir.patch
> new file mode 100644
> index 0000000..bf086e1
> --- /dev/null
> +++ b/meta/recipes-core/dbus/dbus-1.4.12/tmpdir.patch
> @@ -0,0 +1,44 @@
> +From 5105fedd7fa13dadd2d0d864fb77873b83b79a4b Mon Sep 17 00:00:00 2001
> +From: Koen Kooi<koen@dominion.thruhere.net>
> +Date: Thu, 23 Jun 2011 13:52:09 +0200
> +Subject: [PATCH] buildsys: hardcode socketdir to /tmp
> +
> +the TMPDIR env var isn't always pointing to the right target path
> +
> +Upstream-Status: Inappropriate [embedded]
> +
> +Signed-off-by: Koen Kooi<koen@dominion.thruhere.net>
> +
> +Original comment:
> +
> + avoid to check tmp dir at build time. instead uses hard coded /tmp here
> + comment added by Kevin Tian<kevin.tian@intel.com>
> +---
> + configure.ac | 11 +----------
> + 1 files changed, 1 insertions(+), 10 deletions(-)
> +
> +diff --git a/configure.ac b/configure.ac
> +index 408054b..6d26180 100644
> +--- a/configure.ac
> ++++ b/configure.ac
> +@@ -1483,16 +1483,7 @@ AC_SUBST(TEST_LAUNCH_HELPER_BINARY)
> + AC_DEFINE_UNQUOTED(DBUS_TEST_LAUNCH_HELPER_BINARY, "$TEST_LAUNCH_HELPER_BINARY",
> + [Full path to the launch helper test program in the builddir])
> +
> +-#### Find socket directories
> +-if ! test -z "$TMPDIR" ; then
> +- DEFAULT_SOCKET_DIR=$TMPDIR
> +-elif ! test -z "$TEMP" ; then
> +- DEFAULT_SOCKET_DIR=$TEMP
> +-elif ! test -z "$TMP" ; then
> +- DEFAULT_SOCKET_DIR=$TMP
> +-else
> +- DEFAULT_SOCKET_DIR=/tmp
> +-fi
> ++DEFAULT_SOCKET_DIR=/tmp
> +
> + DEFAULT_SOCKET_DIR=`echo $DEFAULT_SOCKET_DIR | sed 's/+/%2B/g'`
> +
> +--
> +1.6.6.1
> +
> diff --git a/meta/recipes-core/dbus/dbus_1.4.1.bb b/meta/recipes-core/dbus/dbus_1.4.1.bb
> deleted file mode 100644
> index 252d160..0000000
> --- a/meta/recipes-core/dbus/dbus_1.4.1.bb
> +++ /dev/null
> @@ -1,6 +0,0 @@
> -include dbus.inc
> -
> -PR = "r6"
> -
> -SRC_URI[md5sum] = "99cb057700c0455fb68f8d57902f77ac"
> -SRC_URI[sha256sum] = "caa1a0ded2d0f2e95c1d4ec7e3c8bd44834928c5b0ed41a7189963f3593983bd"
> diff --git a/meta/recipes-core/dbus/dbus_1.4.12.bb b/meta/recipes-core/dbus/dbus_1.4.12.bb
> new file mode 100644
> index 0000000..ada53c9
> --- /dev/null
> +++ b/meta/recipes-core/dbus/dbus_1.4.12.bb
> @@ -0,0 +1,4 @@
> +include dbus.inc
> +SRC_URI[md5sum] = "104f2ea94c10a896dfb1edecb5714cb1"
> +SRC_URI[sha256sum] = "da3c97fd546610558d588799e27c4fa81101e754acbcd34747a42c131f30dbe7"
> +
>
>
>
> _______________________________________________
> Openembedded-core mailing list
> Openembedded-core@lists.openembedded.org
> http://lists.linuxtogo.org/cgi-bin/mailman/listinfo/openembedded-core
Merged into OE-Core
Thanks
Sau!
^ permalink raw reply [flat|nested] 2+ messages in thread
end of thread, other threads:[~2011-06-30 23:28 UTC | newest]
Thread overview: 2+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2011-06-23 12:32 [PATCH] dbus: update to 1.4.12 Koen Kooi
2011-06-30 23:24 ` Saul Wold
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.