From mboxrd@z Thu Jan 1 00:00:00 1970 Return-path: Received: from mx1.redhat.com ([209.132.183.28]:8114 "EHLO mx1.redhat.com" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1751402Ab1GGNxB (ORCPT ); Thu, 7 Jul 2011 09:53:01 -0400 Message-ID: <4E15BA35.9090806@redhat.com> Date: Thu, 07 Jul 2011 10:52:53 -0300 From: Mauro Carvalho Chehab MIME-Version: 1.0 To: Hans Verkuil CC: Tomasz Stanislawski , linux-media@vger.kernel.org, m.szyprowski@samsung.com, kyungmin.park@samsung.com, laurent.pinchart@ideasonboard.com Subject: Re: [RFC] DV timings spec fixes at V4L2 API - was: [PATCH 1/8] v4l: add macro for 1080p59_54 preset References: <1309351877-32444-1-git-send-email-t.stanislaws@samsung.com> <761c3894fa161d5e702cccf80443c7dd.squirrel@webmail.xs4all.nl> <4E14BA02.1010207@redhat.com> <201107071333.24501.hverkuil@xs4all.nl> In-Reply-To: <201107071333.24501.hverkuil@xs4all.nl> Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 7bit List-ID: Sender: Em 07-07-2011 08:33, Hans Verkuil escreveu: > On Wednesday, July 06, 2011 21:39:46 Mauro Carvalho Chehab wrote: >> Em 06-07-2011 09:14, Hans Verkuil escreveu: >>>> Em 06-07-2011 08:31, Hans Verkuil escreveu: >>>>>> Em 05-07-2011 10:20, Hans Verkuil escreveu: >>>>>> >>>>>>>> I failed to see what information is provided by the "presets" name. >>>>>>>> If >>>>>>>> this were removed >>>>>>>> from the ioctl, and fps would be added instead, the API would be >>>>>>>> clearer. The only >>>>>>>> adjustment would be to use "index" as the preset selection key. >>>>>>>> Anyway, >>>>>>>> it is too late >>>>>>>> for such change. We need to live with that. >>>>>>> >>>>>>> Adding the fps solves nothing. Because that still does not give you >>>>>>> specific timings. >>>>>>> You can have 1920x1080P60 that has quite different timings from the >>>>>>> CEA-861 standard >>>>>>> and that may not be supported by a TV. >>>>>>> >>>>>>> If you are working with HDMI, then you may want to filter all >>>>>>> supported >>>>>>> presets to >>>>>>> those of the CEA standard. >>>>>>> >>>>>>> That's one thing that is missing at the moment: that presets belonging >>>>>>> to a certain >>>>>>> standard get their own range. Since we only do CEA861 right now it >>>>>>> hasn't been an >>>>>>> issue, but it will. >>>>>> >>>>>> I prepared a long email about that, but then I realized that we're >>>>>> investing our time into >>>>>> something broken, at the light of all DV timing standards. So, I've >>>>>> dropped it and >>>>>> started from scratch. >>>>>> >>>>>> From what I've got, there are some hardware that can only do a limited >>>>>> set >>>>>> of DV timings. >>>>>> If this were not the case, we could simply just use the >>>>>> VIDIOC_S_DV_TIMINGS/VIDIOC_G_DV_TIMINGS, >>>>>> and put the CEA 861 and VESA timings into some userspace library. >>>>>> >>>>>> In other words, the PRESET API is meant to solve the case where >>>>>> hardware >>>>>> only support >>>>>> a limited set of frequencies, that may or may not be inside the CEA >>>>>> standard. >>>>>> >>>>>> Let's assume we never added the current API, and discuss how it would >>>>>> properly fulfill >>>>>> the user needs. An API that would likely work is: >>>>>> >>>>>> struct v4l2_dv_enum_preset2 { >>>>>> __u32 index; >>>>>> __u8 name[32]; /* Name of the preset timing */ >>>>>> >>>>>> struct v4l2_fract fps; >>>>>> >>>>>> #define DV_PRESET_IS_PROGRESSIVE 1<<31 >>>>>> #define DV_PRESET_SPEC(flag) (flag && 0xff) >>>>>> #define DV_PRESET_IS_CEA861 1 >>>>>> #define DV_PRESET_IS_DMT 2 >>>>>> #define DV_PRESET_IS_CVF 3 >>>>>> #define DV_PRESET_IS_GTF 4 >>>>>> #define DV_PRESET_IS_VENDOR_SPECIFIC 5 >>>>>> >>>>>> __u32 flags; /* Interlaced/progressive, DV specs, etc */ >>>>>> >>>>>> __u32 width; /* width in pixels */ >>>>>> __u32 height; /* height in lines */ >>>>>> __u32 polarities; /* Positive or negative polarity */ >>>>>> __u64 pixelclock; /* Pixel clock in HZ. Ex. 74.25MHz->74250000 */ >>>>>> __u32 hfrontporch; /* Horizpontal front porch in pixels */ >>>>>> __u32 hsync; /* Horizontal Sync length in pixels */ >>>>>> __u32 hbackporch; /* Horizontal back porch in pixels */ >>>>>> __u32 vfrontporch; /* Vertical front porch in pixels */ >>>>>> __u32 vsync; /* Vertical Sync length in lines */ >>>>>> __u32 vbackporch; /* Vertical back porch in lines */ >>>>>> __u32 il_vfrontporch; /* Vertical front porch for bottom field of >>>>>> * interlaced field formats >>>>>> */ >>>>>> __u32 il_vsync; /* Vertical sync length for bottom field of >>>>>> * interlaced field formats >>>>>> */ >>>>>> __u32 il_vbackporch; /* Vertical back porch for bottom field of >>>>>> * interlaced field formats >>>>>> */ >>>>>> __u32 reserved[4]; >>>>>> }; >>>>>> >>>>>> #define VIDIOC_ENUM_DV_PRESETS2 _IOWR('V', 83, struct >>>>>> v4l2_dv_enum_preset2) >>>>>> #define VIDIOC_S_DV_PRESET2 _IOWR('V', 84, u32 index) >>>>>> #define VIDIOC_G_DV_PRESET2 _IOWR('V', 85, u32 index) >>>>>> >>>>>> Such preset API seems to work for all cases. Userspace can use any DV >>>>>> timing >>>>>> information to select the desired format, and don't need to have a >>>>>> switch >>>>>> for >>>>>> a preset macro to try to guess what the format actually means. Also, >>>>>> there's no >>>>>> need to touch at the API spec every time a new DV timeline is needed. >>>>>> >>>>>> Also, it should be noticed that, since the size of the data on the >>>>>> above >>>>>> definitions >>>>>> are different than the old ones, _IO macros will provide a different >>>>>> magic >>>>>> number, >>>>>> so, adding these won't break the existing API. >>>>>> >>>>>> So, I think we should work on this proposal, and mark the existing one >>>>>> as >>>>>> deprecated. >>>>> >>>>> This proposal makes it very hard for applications to directly select a >>>>> format like 720p50 because the indices can change at any time. >>>> >>>> Why? All the application needs to do is to call VIDIOC_ENUM_DV_PRESETS2, >>>> check what line it wants, >>> >>> It's not so easy as you think to find the right timings: you have to check >>> many parameters to be certain you have the right one and not some subtle >>> variation. >>> >>>> and do a S_DV_PRESET2, just like any other place >>>> where V4L2 defines an ENUM function. >>>> >>>> The enum won't change during application runtime, so, they can be stored >>>> if the application would need to switch to other formats latter. >>>> >>>>> I think >>>>> this is a very desirable feature, particularly for apps running on >>>>> embedded systems where the hardware is known. This was one of the design >>>>> considerations at the time this API was made. >>>> >>>> This is a very weak argument. With just one ENUM loop, the application can >>>> quickly get the right format(s), and associate them with any internal >>>> namespace. >>> >>> That actually isn't easy at all. >> >> For the trivial case where the application just wants one of the CEA861 standard >> (or VESA DMT), the check is trivial. >> >> >> The speed of the test can even be improved if the order at the struct would >> be changed to be: >> >> struct v4l2_dv_enum_preset2 { >> __u32 index; >> __u32 flags; >> >> struct v4l2_fract fps; >> __u32 width; /* width in pixels */ >> __u32 height; /* height in lines */ >> >> ... >> } >> >> The dv preset seek routine at the application can then be coded as: >> >> struct seek_preset { /* Need to follow the same order/arguments as v4l2_dv_enum_preset2 */ >> struct v4l2_fract fps; >> __u32 width; >> __u32 height; >> }; >> >> struct myapp_preset { >> __u32 flags; >> >> struct seek_preset preset; >> }; >> >> struct myapp_preset cea861_vic16 = { >> .flags = DV_PRESET_IS_PROGRESSIVE | DV_PRESET_IS_CEA861, >> .width = 1920, >> .height = 1080, >> }; >> >> int return_dv_preset_index(fp, struct myapp_preset *needed) >> { >> int found = -1; >> struct v4l2_dv_enum_preset2 preset; >> do { >> rc = ioctl(fp, VIDIOC_ENUM_DV_PRESETS, &preset); >> if (rc == -1) >> break; >> if ((preset.flags & needed->flags) != needed->flags) >> continue; >> if (!memcmp(&preset.fps, &needed->preset)) { >> found = preset->index; >> break; >> } >> } while (!rc && found < 0); >> } >> >> void main(void) { >> ... >> index = return_dv_preset_index(fp, cea861_vic16); >> ... >> } > > And the current equivalent is: > > struct v4l_dv_preset preset = { V4L2_DV_1080P60 }; > ioctl(f, VIDIOC_S_DV_PRESET, &preset); Yes, except for the fact that: - API spec needs addition for every new preset that we standardize; - It doesn't support a vendor-specific preset, as there's no way to discover what are the timing constants for the preset; - Namespacing is broken. > You want a whole new API that in my view makes things only more complicated and > misses existing functionality (such as the one above). I prefer to fix the API, if it is possible/doable on a non-messy way. Yet, as this API is currently used only by two drivers (DaVinci and tvp7002), it is better to fix it sooner than later, to avoid more efforts on fixing it. > Whereas with a few tweaks and possibly a new VIDIOC_G_PRESET_TIMINGS ioctl you > can offer the same functionality with the existing API. You're proposing a new "enum" preset timings that would present the missing info that VIDIOC_S_DV_PRESET doesn't present, except that an application will need to call 2 ioctl's in order to enumerate the presets, instead of one. > So, once again my proposal: > > ENUM_DV_PRESETS is extended with a flags field and a fps v4l2_fract (or frame_period, > whatever works best). Flags give you progressive vs interlaced, and I've no problem > adding things like IS_CEA861 or similar flags to that. > > The current set of presets remain in use (but get renamed with the old ones as aliases) > for CEA861 and (in the near future) VESA DMT timings. > Note that all the hardware I > know that has predefined timings does so only for those two standards. Makes sense > too: only the consumer electronic standards for SDTV/HDTV and the VGA-like PC monitor > standards are typical standards. We need a further investigation about that. What are the predefined timings defined for Samgung hardware? Also, one possible implementation for output devices would be to use EDID to retrieve the timings acceptable by the monitor/TV and compare to its internal capabilities. This is probably the only way to avoid requiring CAP_SYS_ADMIN for the DV calls, as a bad timing may damage the monitor and/or the V4L device. If a vendor decides to implement something like that (either in firmware or on Kernel), then the list of presets will likely have a mix with all standards. > For presets not related to those standards the easiest method I see is just to assign > a preset like (0x80000000 | index). I've thinked about that already. Yeah, this would fix part of the problem, allowing the implementation of vendor-specific timings and the support for other standards not covered yet. There are, however, some issues: 1) the API will be messier; 2) Imagine that a new timing were added as a vendor-specific timing. Later, that standard got recognized by some forum and were added at some standard. In that case, the vendor cannot simply change the preset index, as it will break the API. Also, duplicating the information is not a good idea. With the preset standards as flags, when this happens, all the driver needs is to add a new flag, without breaking the API. > We may need to add a VIDIOC_G_PRESET_TIMINGS, but I am not certain we really need > that. ENUM_DV_PRESETS may give sufficient information already. This will only work if there aren't two timings with the same fps/resolution, including on the vendor-specific timings. Let's suppose that there are two non-DMT, non-CEA standars, from two different vendors, that have different timings. With the current API, there's no way to differentiate them. > Based on my experience with GTF/CVT formats I strongly suspect that drivers will > need to implement a VIDIOC_QUERY_DV_TIMINGS ioctl and let a userspace library detect > the GTF/CVT standard. This is surprisingly complex (mostly due to extremely shoddy > standards). Maybe, but I bet that there are a few GTF/CVT standards that are implemented on a large amount of TV/monitors. It may make sense to have those added as presets. I'd love to get some feedback from other developers about that. Samsung? The issue with S_DV_TIMINGS is that we likely need to request for CAP_SYS_ADMIN, as a bad timing may damage the hardware. Currently, there's not such requirement for DaVinci/tvp7002, nor v4l2-ioctl enforces that, but this needs a fix. > For GTF/CVT output you want to use VIDIOC_S_DV_TIMINGS anyway. True. > The reason > there is no GTF/CVT support yet is simply because I don't want to make proposals > unless I actually implemented it and worked with it for some time to see what works > best. > > Everything you can do with your proposal you can do with mine, and mine doesn't > deprecate anything. See above. > BTW, in the case of HD-SDI transmitters/receivers the CEA-861 standard does not > apply, strictly speaking. That standard is covered by SMPTE 292M. It does support > most of the usual SDTV/HDTV formats as are defined in CEA-861, except that things > like front/back porch etc. do not apply to this serial interface. The idea behind > the presets is that it defines industry standard resolution/framerate combinations, > but the standards behind those differ per interface type. You don't really care > about those in an application. The user (or developer) just wants to select 1080P60 or > WUXGA. Ok. > I am frankly not certain anymore if we want to have the standard as part of > the macro name. Something like V4L2_DV_HDTV_1920X1080P60 might be more appropriate, > with comments next to it referring to the relevant standards depending on the > physical interface type. That's the problem with the namespace. I think that that's basically the reason why Xorg never created a macro naming for the resolutions. Whatever namespace we choose, we'll have troubles. I bet that, with your proposal, we'll end by having conflicts between two different standards that implement the same resolution/fps/"progressiveness". > And instead of using flags to denote the used standard, it might be better to > reserve a u16 for the standard. It seems that a standards bitmask may work better, as, eventually, the same timing may be defined by more than one standard. > History has shown that video formats stay around for a looong time, but the standards > describing them evolve continuously. True. We might end to have some timings that are different on a new standard revision, in order to fix some issue. That's why I think we need to expose all the timings at the DV enum ioctl. This gives more flexibility to the application to reject an specific standard if needed for whatever reason. Regards, Mauro