From: Fernando Lopez-Lezcano <nando@ccrma.Stanford.EDU>
To: Thomas Gleixner <tglx@linutronix.de>
Cc: LKML <linux-kernel@vger.kernel.org>,
linux-rt-users <linux-rt-users@vger.kernel.org>,
Peter Zijlstra <peterz@infradead.org>,
"Paul E. McKenney" <paulmck@linux.vnet.ibm.com>,
Fernando Lopez-Lezcano <nando@ccrma.Stanford.EDU>
Subject: Re: [ANNOUNCE] 3.0-rt6
Date: Wed, 03 Aug 2011 23:34:36 -0700 [thread overview]
Message-ID: <4E3A3D7C.6050403@localhost> (raw)
In-Reply-To: <alpine.LFD.2.02.1107282213000.31246@ionos>
On 07/28/2011 02:43 PM, Thomas Gleixner wrote:
> Dear RT Folks,
>
> I'm pleased to announce the 3.0-rt6 release.
Thanks, here's some feedback from a user of Planet CCRMA (running an
unreleased build of rt6 on x86_64 which I have not had a chance to test
yet). See below for some details...
-- Fernando
-------- Original Message --------
Subject: More grist for the RT mill
Date: Wed, 3 Aug 2011 03:39:46 -0700
From: Tracey Hytry
After a lot of work I've managed to install Feodra15 on one of the
machines...
just to be able to test the x86_64 version of the new builds.
Enclosed is info from just after boot.
I didn't have anything set up to test it, but there were no more errors
afterwards;
starting x and transferring some files via nfs.
You can pass this along to linux-rt-users if needed.
----------------------------------------------
dmesg:
[ 117.025914]
[ 117.025916] =================================
[ 117.025918] [ INFO: inconsistent lock state ]
[ 117.025920] 3.0.0-1.rt6.1.fc15.ccrma.x86_64.rt #1
[ 117.025922] ---------------------------------
[ 117.025924] inconsistent {IN-HARDIRQ-W} -> {HARDIRQ-ON-W} usage.
[ 117.025927] posixcputmr/0/6 [HC0[0]:SC0[0]:HE1:SE1] takes:
[ 117.025929] (&sig->cputimer.lock){?.....}, at: [<ffffffff8107b6f1>]
__run_posix_cpu_timers+0x8f/0x353
[ 117.025936] {IN-HARDIRQ-W} state was registered at:
[ 117.025938] [<ffffffff8108c8df>] __lock_acquire+0x2ce/0xd0c
[ 117.025943] [<ffffffff8108d820>] lock_acquire+0xf3/0x13e
[ 117.025946] [<ffffffff814ef322>] _raw_spin_lock+0x45/0x79
[ 117.025949] [<ffffffff8104a617>] __account_system_time+0x4a/0x81
[ 117.025952] [<ffffffff8104e9c7>] account_system_time+0xa1/0xa8
[ 117.025955] [<ffffffff8104ec1e>] account_process_tick+0x78/0x86
[ 117.025957] [<ffffffff81068ff1>] update_process_times+0x2f/0x54
[ 117.025961] [<ffffffff81088c6b>] tick_sched_timer+0xff/0x128
[ 117.025964] [<ffffffff8107c5f6>] __run_hrtimer+0xed/0x1db
[ 117.025967] [<ffffffff8107d008>] hrtimer_interrupt+0x1a1/0x2af
[ 117.025969] [<ffffffff814f719c>] smp_apic_timer_interrupt+0x77/0x8a
[ 117.025973] [<ffffffff814f6053>] apic_timer_interrupt+0x13/0x20
[ 117.025976] [<ffffffff814ef64c>] _raw_spin_unlock_irqrestore+0x4d/0x73
[ 117.025978] [<ffffffff8107a943>] thread_group_cputimer+0xae/0xbd
[ 117.025981] [<ffffffff8107a97d>] cpu_timer_sample_group+0x2b/0x75
[ 117.025984] [<ffffffff8107bc04>] set_process_cpu_timer+0x36/0xdf
[ 117.025987] [<ffffffff8107bcf1>] update_rlimit_cpu+0x44/0x63
[ 117.025989] [<ffffffff81206305>]
selinux_bprm_committing_creds+0xd3/0xd8
[ 117.025994] [<ffffffff811fd99c>]
security_bprm_committing_creds+0x13/0x15
[ 117.025998] [<ffffffff8114279e>] install_exec_creds+0x13/0x52
[ 117.026001] [<ffffffff811816d2>] load_elf_binary+0xf40/0x175e
[ 117.026004] [<ffffffff81143630>] search_binary_handler+0xad/0x25d
[ 117.026007] [<ffffffff81144600>] do_execve_common+0x186/0x283
[ 117.026009] [<ffffffff81144740>] do_execve+0x43/0x45
[ 117.026009] [<ffffffff810114e4>] sys_execve+0x43/0x5a
[ 117.026009] [<ffffffff814f5adc>] stub_execve+0x6c/0xc0
[ 117.026009] irq event stamp: 37
[ 117.026009] hardirqs last enabled at (37): [<ffffffff814ef69f>]
_raw_spin_unlock_irq+0x2d/0x59
[ 117.026009] hardirqs last disabled at (36): [<ffffffff814ef405>]
_raw_spin_lock_irq+0x1d/0x82
[ 117.026009] softirqs last enabled at (0): [<ffffffff8105838a>]
copy_process+0x6c1/0x14a0
[ 117.026009] softirqs last disabled at (0): [< (null)>]
(null)
[ 117.026009]
[ 117.026009] other info that might help us debug this:
[ 117.026009] Possible unsafe locking scenario:
[ 117.026009]
[ 117.026009] CPU0
[ 117.026009] ----
[ 117.026009] lock(&sig->cputimer.lock);
[ 117.026009] <Interrupt>
[ 117.026009] lock(&sig->cputimer.lock);
[ 117.026009]
[ 117.026009] *** DEADLOCK ***
[ 117.026009]
[ 117.026009] no locks held by posixcputmr/0/6.
[ 117.026009]
[ 117.026009] stack backtrace:
[ 117.026009] Pid: 6, comm: posixcputmr/0 Not tainted
3.0.0-1.rt6.1.fc15.ccrma.x86_64.rt #1
[ 117.026009] Call Trace:
[ 117.026009] [<ffffffff814e6278>] print_usage_bug+0x1e3/0x1f4
[ 117.026009] [<ffffffff810154e5>] ? save_stack_trace+0x2c/0x49
[ 117.026009] [<ffffffff8108be73>] ? check_usage_forwards+0xa6/0xa6
[ 117.026009] [<ffffffff8108c4f7>] mark_lock+0x106/0x220
[ 117.026009] [<ffffffff8108c956>] __lock_acquire+0x345/0xd0c
[ 117.026009] [<ffffffff8108a020>] ? trace_hardirqs_off+0xd/0xf
[ 117.026009] [<ffffffff8108a5f5>] ?
lock_release_holdtime.part.10+0x59/0x62
[ 117.026009] [<ffffffff814ef69f>] ? _raw_spin_unlock_irq+0x2d/0x59
[ 117.026009] [<ffffffff8107b6f1>] ? __run_posix_cpu_timers+0x8f/0x353
[ 117.026009] [<ffffffff8108d820>] lock_acquire+0xf3/0x13e
[ 117.026009] [<ffffffff8107b6f1>] ? __run_posix_cpu_timers+0x8f/0x353
[ 117.026009] [<ffffffff8104aacd>] ? finish_task_switch+0x7c/0xf5
[ 117.026009] [<ffffffff8104aa90>] ? finish_task_switch+0x3f/0xf5
[ 117.026009] [<ffffffff814ef322>] _raw_spin_lock+0x45/0x79
[ 117.026009] [<ffffffff8107b6f1>] ? __run_posix_cpu_timers+0x8f/0x353
[ 117.026009] [<ffffffff8107b6f1>] __run_posix_cpu_timers+0x8f/0x353
[ 117.026009] [<ffffffff81049045>] ? need_resched+0x23/0x2d
[ 117.026009] [<ffffffff8107ba6c>] posix_cpu_timers_thread+0xb7/0x14b
[ 117.026009] [<ffffffff8107b9b5>] ? __run_posix_cpu_timers+0x353/0x353
[ 117.026009] [<ffffffff810785da>] kthread+0x99/0xa1
[ 117.026009] [<ffffffff8108a020>] ? trace_hardirqs_off+0xd/0xf
[ 117.026009] [<ffffffff8108dc5b>] ? trace_hardirqs_on+0xd/0xf
[ 117.026009] [<ffffffff814f67a4>] kernel_thread_helper+0x4/0x10
[ 117.026009] [<ffffffff814efa58>] ? retint_restore_args+0x13/0x13
[ 117.026009] [<ffffffff81078541>] ? __init_kthread_worker+0x8c/0x8c
[ 117.026009] [<ffffffff814f67a0>] ? gs_change+0x13/0x13
----------------------------------------------
lsmod:
Module Size Used by
fuse 70197 3
sunrpc 222384 1
powernow_k8 29079 1
nf_conntrack_ipv4 14700 1
nf_defrag_ipv4 12673 1 nf_conntrack_ipv4
xt_state 12578 1
nf_conntrack 81796 2 nf_conntrack_ipv4,xt_state
snd_ice1712 63535 0
snd_ice17xx_ak4xxx 13128 1 snd_ice1712
snd_ak4xxx_adda 18480 2 snd_ice1712,snd_ice17xx_ak4xxx
snd_cs8427 14054 1 snd_ice1712
snd_ac97_codec 121717 1 snd_ice1712
snd_seq 61755 0
snd_pcm 85387 2 snd_ice1712,snd_ac97_codec
xfs 763810 1
snd_timer 29239 2 snd_seq,snd_pcm
snd_page_alloc 14039 1 snd_pcm
ac97_bus 12682 1 snd_ac97_codec
snd_i2c 14050 2 snd_ice1712,snd_cs8427
snd_mpu401_uart 14244 1 snd_ice1712
ppdev 17712 0
snd_rawmidi 25881 1 snd_mpu401_uart
snd_seq_device 14209 2 snd_seq,snd_rawmidi
nv_tco 13564 0
snd 71052 11
snd_ice1712,snd_ak4xxx_adda,snd_cs8427,snd_ac97_codec,snd_seq,snd_pcm,snd_timer,snd_i2c,snd_mpu401_uart,snd_rawmidi,snd_seq_device
parport_pc 28208 0
edac_core 48073 0
forcedeth 55667 0
edac_mce_amd 18786 0
parport 40931 2 ppdev,parport_pc
asus_atk0110 18767 0
k8temp 13123 0
i2c_nforce2 13166 0
soundcore 14562 1 snd
firewire_ohci 36465 0
uas 17919 0
firewire_core 62263 1 firewire_ohci
usb_storage 52308 0
ata_generic 12899 0
crc_itu_t 12579 1 firewire_core
pata_jmicron 12747 0
pata_acpi 13027 0
sata_nv 27864 6
pata_amd 18256 1
nouveau 556740 3
ttm 65945 1 nouveau
drm_kms_helper 36330 1 nouveau
drm 206243 5 nouveau,ttm,drm_kms_helper
i2c_algo_bit 13246 1 nouveau
i2c_core 34149 5
i2c_nforce2,nouveau,drm_kms_helper,drm,i2c_algo_bit
mxm_wmi 12823 1 nouveau
wmi 18697 1 mxm_wmi
video 19210 1 nouveau
----------------------------------------------
lspci:
00:00.0 RAM memory: nVidia Corporation MCP55 Memory Controller (rev a1)
00:01.0 ISA bridge: nVidia Corporation MCP55 LPC Bridge (rev a2)
00:01.1 SMBus: nVidia Corporation MCP55 SMBus (rev a2)
00:01.2 RAM memory: nVidia Corporation MCP55 Memory Controller (rev a2)
00:02.0 USB Controller: nVidia Corporation MCP55 USB Controller (rev a1)
00:02.1 USB Controller: nVidia Corporation MCP55 USB Controller (rev a2)
00:04.0 IDE interface: nVidia Corporation MCP55 IDE (rev a1)
00:05.0 IDE interface: nVidia Corporation MCP55 SATA Controller (rev a2)
00:05.1 IDE interface: nVidia Corporation MCP55 SATA Controller (rev a2)
00:05.2 IDE interface: nVidia Corporation MCP55 SATA Controller (rev a2)
00:06.0 PCI bridge: nVidia Corporation MCP55 PCI bridge (rev a2)
00:08.0 Bridge: nVidia Corporation MCP55 Ethernet (rev a2)
00:09.0 Bridge: nVidia Corporation MCP55 Ethernet (rev a2)
00:0e.0 PCI bridge: nVidia Corporation MCP55 PCI Express bridge (rev a2)
00:0f.0 PCI bridge: nVidia Corporation MCP55 PCI Express bridge (rev a2)
00:18.0 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron]
HyperTransport Technology Configuration
00:18.1 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron]
Address Map
00:18.2 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron]
DRAM Controller
00:18.3 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron]
Miscellaneous Control
01:07.0 Multimedia audio controller: VIA Technologies Inc. ICE1712
[Envy24] PCI Multi-Channel I/O Controller (rev 02)
01:0b.0 FireWire (IEEE 1394): Texas Instruments TSB43AB22/A
IEEE-1394a-2000 Controller (PHY/Link)
02:00.0 SATA controller: JMicron Technology Corp. JMB362/JMB363 Serial
ATA Controller (rev 03)
02:00.1 IDE interface: JMicron Technology Corp. JMB362/JMB363 Serial ATA
Controller (rev 03)
03:00.0 VGA compatible controller: nVidia Corporation G98 [GeForce 8400
GS] (rev a1)
next prev parent reply other threads:[~2011-08-04 6:34 UTC|newest]
Thread overview: 29+ messages / expand[flat|nested] mbox.gz Atom feed top
2011-07-28 21:43 [ANNOUNCE] 3.0-rt6 Thomas Gleixner
2011-07-28 22:33 ` Madovsky
2011-07-28 23:33 ` Peter W. Morreale
2011-07-29 0:56 ` Thomas Gleixner
2011-07-29 6:05 ` Mike Galbraith
2011-07-29 14:03 ` Paul E. McKenney
2011-07-29 15:57 ` [ANNOUNCE] 3.0-rt6 (kgdb working) Darren Hart
2011-07-30 15:49 ` [ANNOUNCE] 3.0-rt6 Remy Bohmer
2011-07-30 15:49 ` Remy Bohmer
2011-07-30 20:21 ` Remy Bohmer
2011-08-07 10:44 ` Remy Bohmer
2011-08-01 8:42 ` Rolando Martins
2011-08-01 10:34 ` Mike Galbraith
2011-08-01 10:45 ` Rolando Martins
2011-08-01 10:45 ` Rolando Martins
2011-08-01 11:06 ` Peter Zijlstra
2011-08-01 11:10 ` Rolando Martins
2011-08-04 6:34 ` Fernando Lopez-Lezcano [this message]
2011-08-04 9:42 ` Peter Zijlstra
2011-08-04 19:05 ` Fernando Lopez-Lezcano
2011-08-04 20:15 ` Uwe Kleine-König
2011-08-05 9:28 ` Uwe Kleine-König
2011-08-05 16:03 ` Fernando Lopez-Lezcano
2011-08-08 17:25 ` Fernando Lopez-Lezcano
2011-08-04 16:34 ` [ANNOUNCE] 3.0-rt6 : BUG at kernel/trmutex.c:724! Tim Sander
2011-08-04 16:34 ` Tim Sander
2011-08-04 16:37 ` Peter Zijlstra
2011-08-04 17:04 ` Tim Sander
2011-08-04 17:04 ` Tim Sander
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=4E3A3D7C.6050403@localhost \
--to=nando@ccrma.stanford.edu \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-rt-users@vger.kernel.org \
--cc=paulmck@linux.vnet.ibm.com \
--cc=peterz@infradead.org \
--cc=tglx@linutronix.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.