All of lore.kernel.org
 help / color / mirror / Atom feed
diff for duplicates of <4E5366AF.7040108@freescale.com>

diff --git a/a/1.txt b/N1/1.txt
index 655a241..ae2d167 100644
--- a/a/1.txt
+++ b/N1/1.txt
@@ -1,40 +1,29 @@
-=E4=BA=8E 2011=E5=B9=B408=E6=9C=8819=E6=97=A5 00:25, Scott Wood =E5=86=99=
-=E9=81=93:
+于 2011年08月19日 00:25, Scott Wood 写道:
 > On 08/17/2011 09:33 PM, b35362@freescale.com wrote:
 >> From: Liu Shuo<b35362@freescale.com>
 >>
->> Freescale FCM controller has a 2K size limitation of buffer RAM. In or=
-der
->> to support the Nand flash chip whose page size is larger than 2K bytes=
-,
->> we divide a page into multi-2K pages for MTD layer driver. In that cas=
-e,
->> we force to set the page size to 2K bytes. We convert the page address=
- of
->> MTD layer driver to a real page address in flash chips and a column in=
-dex
->> in fsl_elbc driver. We can issue any column address by UA instruction =
-of
+>> Freescale FCM controller has a 2K size limitation of buffer RAM. In order
+>> to support the Nand flash chip whose page size is larger than 2K bytes,
+>> we divide a page into multi-2K pages for MTD layer driver. In that case,
+>> we force to set the page size to 2K bytes. We convert the page address of
+>> MTD layer driver to a real page address in flash chips and a column index
+>> in fsl_elbc driver. We can issue any column address by UA instruction of
 >> elbc controller.
 >>
->> NOTE: Due to there is a limitation of 'Number of Partial Program Cycle=
-s in
->> the Same Page (NOP)', the flash chip which is supported by this workar=
-ound
+>> NOTE: Due to there is a limitation of 'Number of Partial Program Cycles in
+>> the Same Page (NOP)', the flash chip which is supported by this workaround
 >> have to meet below conditions.
 >> 	1. page size is not greater than 4KB
 >> 	2.	1) if main area and spare area have independent NOPs:
->> 			  main  area NOP    :>=3D3
->> 			  spare area NOP    :>=3D2?
+>> 			  main  area NOP    :>=3
+>> 			  spare area NOP    :>=2?
 > How often are the NOPs split like this?
 >
 >> 		2) if main area and spare area have a common NOP:
->> 			  NOP               :>=3D4
+>> 			  NOP               :>=4
 > This depends on how the flash is used.  If you treat it as a NOP1 flash
-> (e.g. run ubifs rather than jffs2), then you need NOP2 for a 4K chip an=
-d
-> NOP4 for an 8K chip.  OTOH, if you would be making full use of NOP4 on =
-a
+> (e.g. run ubifs rather than jffs2), then you need NOP2 for a 4K chip and
+> NOP4 for an 8K chip.  OTOH, if you would be making full use of NOP4 on a
 > real 2K chip, you'll need NOP8 for a 4K chip.
 >
 > The NOP restrictions should be documented in the code itself, not just
@@ -51,8 +40,7 @@ let the customers select how to use the flash on their board.
 -LiuShuo
 > If it's less than 4
 > for 4K or 8 for 8K, also print a message saying not to use jffs2 (does
-> yaffs2 do similar things?).  If it's less than 2 for 4K or 4 for 8K, th=
-e
+> yaffs2 do similar things?).  If it's less than 2 for 4K or 4 for 8K, the
 > probe should fail.
 >
 > -Scott
\ No newline at end of file
diff --git a/a/content_digest b/N1/content_digest
index 013b38f..da48a18 100644
--- a/a/content_digest
+++ b/N1/content_digest
@@ -29,43 +29,32 @@
   "b\0"
 ]
 [
-  "=E4=BA=8E 2011=E5=B9=B408=E6=9C=8819=E6=97=A5 00:25, Scott Wood =E5=86=99=\n",
-  "=E9=81=93:\n",
+  "\344\272\216 2011\345\271\26408\346\234\21019\346\227\245 00:25, Scott Wood \345\206\231\351\201\223:\n",
   "> On 08/17/2011 09:33 PM, b35362\@freescale.com wrote:\n",
   ">> From: Liu Shuo<b35362\@freescale.com>\n",
   ">>\n",
-  ">> Freescale FCM controller has a 2K size limitation of buffer RAM. In or=\n",
-  "der\n",
-  ">> to support the Nand flash chip whose page size is larger than 2K bytes=\n",
-  ",\n",
-  ">> we divide a page into multi-2K pages for MTD layer driver. In that cas=\n",
-  "e,\n",
-  ">> we force to set the page size to 2K bytes. We convert the page address=\n",
-  " of\n",
-  ">> MTD layer driver to a real page address in flash chips and a column in=\n",
-  "dex\n",
-  ">> in fsl_elbc driver. We can issue any column address by UA instruction =\n",
-  "of\n",
+  ">> Freescale FCM controller has a 2K size limitation of buffer RAM. In order\n",
+  ">> to support the Nand flash chip whose page size is larger than 2K bytes,\n",
+  ">> we divide a page into multi-2K pages for MTD layer driver. In that case,\n",
+  ">> we force to set the page size to 2K bytes. We convert the page address of\n",
+  ">> MTD layer driver to a real page address in flash chips and a column index\n",
+  ">> in fsl_elbc driver. We can issue any column address by UA instruction of\n",
   ">> elbc controller.\n",
   ">>\n",
-  ">> NOTE: Due to there is a limitation of 'Number of Partial Program Cycle=\n",
-  "s in\n",
-  ">> the Same Page (NOP)', the flash chip which is supported by this workar=\n",
-  "ound\n",
+  ">> NOTE: Due to there is a limitation of 'Number of Partial Program Cycles in\n",
+  ">> the Same Page (NOP)', the flash chip which is supported by this workaround\n",
   ">> have to meet below conditions.\n",
   ">> \t1. page size is not greater than 4KB\n",
   ">> \t2.\t1) if main area and spare area have independent NOPs:\n",
-  ">> \t\t\t  main  area NOP    :>=3D3\n",
-  ">> \t\t\t  spare area NOP    :>=3D2?\n",
+  ">> \t\t\t  main  area NOP    :>=3\n",
+  ">> \t\t\t  spare area NOP    :>=2?\n",
   "> How often are the NOPs split like this?\n",
   ">\n",
   ">> \t\t2) if main area and spare area have a common NOP:\n",
-  ">> \t\t\t  NOP               :>=3D4\n",
+  ">> \t\t\t  NOP               :>=4\n",
   "> This depends on how the flash is used.  If you treat it as a NOP1 flash\n",
-  "> (e.g. run ubifs rather than jffs2), then you need NOP2 for a 4K chip an=\n",
-  "d\n",
-  "> NOP4 for an 8K chip.  OTOH, if you would be making full use of NOP4 on =\n",
-  "a\n",
+  "> (e.g. run ubifs rather than jffs2), then you need NOP2 for a 4K chip and\n",
+  "> NOP4 for an 8K chip.  OTOH, if you would be making full use of NOP4 on a\n",
   "> real 2K chip, you'll need NOP8 for a 4K chip.\n",
   ">\n",
   "> The NOP restrictions should be documented in the code itself, not just\n",
@@ -82,11 +71,10 @@
   "-LiuShuo\n",
   "> If it's less than 4\n",
   "> for 4K or 8 for 8K, also print a message saying not to use jffs2 (does\n",
-  "> yaffs2 do similar things?).  If it's less than 2 for 4K or 4 for 8K, th=\n",
-  "e\n",
+  "> yaffs2 do similar things?).  If it's less than 2 for 4K or 4 for 8K, the\n",
   "> probe should fail.\n",
   ">\n",
   "> -Scott"
 ]
 
-1c1d8ed348643ef073db6ffe5063748d45fbc66e94ffc9eddbb1ce0056803c1c
+2758468ac4a7a9780f15b89f3a8d24b68dc4fdda93ec7cac23f0292a667ff3a9

This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.