From mboxrd@z Thu Jan  1 00:00:00 1970
From: Graeme Russ <graeme.russ@gmail.com>
Date: Mon, 27 Feb 2012 17:42:53 +1100
Subject: [U-Boot] Unable to run scripts with autoscr command
In-Reply-To: <CAEVEsMa+UCJ4yeEFK-aTS56qK5POCzVe=1OPeYoHKH+wh1KZ-Q@mail.gmail.com>
References: <CAEVEsMY6TtXBsohFGyCxDhStnhrCgOo0VMgh7ZXpNspdMJdcVQ@mail.gmail.com>
	<m2r4xtwk6a.fsf@ohwell.denx.de>
	<loom.20120220T110453-91@post.gmane.org>
	<CAEVEsMYjDsUZ=NtxP0-0F-5JXAxwif75eEB3mnR-E2=m6J6SsQ@mail.gmail.com>
	<CALButCJ3=a6+WRwhH=YzvZKkCRNftSvS6PV+D=EibBfDOm83YQ@mail.gmail.com>
	<CAEVEsMY0wHR+9pNKrMdQhY7Phr6UT6u_XXqLBKMNBmXL30cZBA@mail.gmail.com>
	<4F4835E9.9000700@gmail.com>
	<CAEVEsMY+BSLPG+Fe8vC8+BNAXjU0Ut9weNPkarVPwK9cuTtuFQ@mail.gmail.com>
	<CALButC++NB=Zop6hni1c+j+MsY3OvhvFCwAM9zogHm3UeAkPrQ@mail.gmail.com>
	<CAEVEsMa+UCJ4yeEFK-aTS56qK5POCzVe=1OPeYoHKH+wh1KZ-Q@mail.gmail.com>
Message-ID: <4F4B25ED.6020207@gmail.com>
List-Id: <u-boot.lists.denx.de>
MIME-Version: 1.0
Content-Type: text/plain; charset="us-ascii"
Content-Transfer-Encoding: 7bit
To: u-boot@lists.denx.de

Hi Asif,

On 02/27/2012 05:26 PM, Asif Sulikeri wrote:
>     >> And the increase of 100kB is massive - are you sure you are
>     compiling with
>     >> the same set of options defined in the board config file? If you are
>     sure,
>     >> then it would be interesting to find out what has caused it.
> 
> 
> I am compiling with the default options, with no additional changes made to
> the conf file, the 1.3.4 version used to give me 150kB binary as compared
> to the 252kB binary generated by the 2010.06 version.

Ah - Looks like some more options have crept into the default configuration
- Can you send the two board config files (as inline text, not attachments)
so I can compare?

Regards,

Graeme