All of lore.kernel.org
 help / color / mirror / Atom feed
From: Witold Szczeponik <Witold.Szczeponik@gmx.net>
To: bhelgaas@google.com, lenb@kernel.org
Cc: linux-kernel@vger.kernel.org, linux-acpi@vger.kernel.org
Subject: [PATCH V2 1/3] PNP: Simplify setting of resources
Date: Wed, 11 Apr 2012 22:48:23 +0200	[thread overview]
Message-ID: <4F85EE17.1080905@gmx.net> (raw)
In-Reply-To: <4F85ED86.8010002@gmx.net>

This patch factors out the setting of PNP resources into one function which is 
then reused for all PNP resource types.  This makes the code more concise and 
avoids duplication.  The parameters "type" and "flags" are not used at the
moment but will be used by follow-up patches.  Placeholders for these patches 
can be found in the comment lines that contain the "TBD" marker. 

As the code does not make any changes to the ABI, no regressions are expected.

NB: While at it, support for bus type resources is added. 

The patch is applied against Linux 3.3.x.


Signed-off-by: Witold Szczeponik <Witold.Szczeponik@gmx.net>
Reviewed-by: Bjorn Helgaas <bhelgaas@google.com>


Index: linux/drivers/pnp/interface.c
===================================================================
--- linux.orig/drivers/pnp/interface.c
+++ linux/drivers/pnp/interface.c
@@ -298,6 +298,39 @@ static ssize_t pnp_show_current_resource
 	return ret;
 }
 
+static char *pnp_get_resource_value(char *buf,
+				    unsigned long type,
+				    resource_size_t *start,
+				    resource_size_t *end,
+				    unsigned long *flags)
+{
+	if (start)
+		*start = 0;
+	if (end)
+		*end = 0;
+	if (flags)
+		*flags = 0;
+
+	/* TBD: allow for disabled resources */
+
+	buf = skip_spaces(buf);
+	if (start) {
+		*start = simple_strtoull(buf, &buf, 0);
+		if (end) {
+			buf = skip_spaces(buf);
+			if (*buf == '-') {
+				buf = skip_spaces(buf + 1);
+				*end = simple_strtoull(buf, &buf, 0);
+			} else
+				*end = *start;
+		}
+	}
+
+	/* TBD: allow for additional flags, e.g., IORESOURCE_WINDOW */
+
+	return buf;
+}
+
 static ssize_t pnp_set_current_resources(struct device *dmdev,
 					 struct device_attribute *attr,
 					 const char *ubuf, size_t count)
@@ -305,7 +338,6 @@ static ssize_t pnp_set_current_resources
 	struct pnp_dev *dev = to_pnp_dev(dmdev);
 	char *buf = (void *)ubuf;
 	int retval = 0;
-	resource_size_t start, end;
 
 	if (dev->status & PNP_ATTACHED) {
 		retval = -EBUSY;
@@ -349,6 +381,10 @@ static ssize_t pnp_set_current_resources
 		goto done;
 	}
 	if (!strnicmp(buf, "set", 3)) {
+		resource_size_t start;
+		resource_size_t end;
+		unsigned long flags;
+
 		if (dev->active)
 			goto done;
 		buf += 3;
@@ -357,42 +393,37 @@ static ssize_t pnp_set_current_resources
 		while (1) {
 			buf = skip_spaces(buf);
 			if (!strnicmp(buf, "io", 2)) {
-				buf = skip_spaces(buf + 2);
-				start = simple_strtoul(buf, &buf, 0);
-				buf = skip_spaces(buf);
-				if (*buf == '-') {
-					buf = skip_spaces(buf + 1);
-					end = simple_strtoul(buf, &buf, 0);
-				} else
-					end = start;
-				pnp_add_io_resource(dev, start, end, 0);
-				continue;
-			}
-			if (!strnicmp(buf, "mem", 3)) {
-				buf = skip_spaces(buf + 3);
-				start = simple_strtoul(buf, &buf, 0);
-				buf = skip_spaces(buf);
-				if (*buf == '-') {
-					buf = skip_spaces(buf + 1);
-					end = simple_strtoul(buf, &buf, 0);
-				} else
-					end = start;
-				pnp_add_mem_resource(dev, start, end, 0);
-				continue;
-			}
-			if (!strnicmp(buf, "irq", 3)) {
-				buf = skip_spaces(buf + 3);
-				start = simple_strtoul(buf, &buf, 0);
-				pnp_add_irq_resource(dev, start, 0);
-				continue;
-			}
-			if (!strnicmp(buf, "dma", 3)) {
-				buf = skip_spaces(buf + 3);
-				start = simple_strtoul(buf, &buf, 0);
-				pnp_add_dma_resource(dev, start, 0);
-				continue;
-			}
-			break;
+				buf = pnp_get_resource_value(buf + 2,
+							     IORESOURCE_IO,
+							     &start, &end,
+							     &flags);
+				pnp_add_io_resource(dev, start, end, flags);
+			} else if (!strnicmp(buf, "mem", 3)) {
+				buf = pnp_get_resource_value(buf + 3,
+							     IORESOURCE_MEM,
+							     &start, &end,
+							     &flags);
+				pnp_add_mem_resource(dev, start, end, flags);
+			} else if (!strnicmp(buf, "irq", 3)) {
+				buf = pnp_get_resource_value(buf + 3,
+							     IORESOURCE_IRQ,
+							     &start, NULL,
+							     &flags);
+				pnp_add_irq_resource(dev, start, flags);
+			} else if (!strnicmp(buf, "dma", 3)) {
+				buf = pnp_get_resource_value(buf + 3,
+							     IORESOURCE_DMA,
+							     &start, NULL,
+							     &flags);
+				pnp_add_dma_resource(dev, start, flags);
+			} else if (!strnicmp(buf, "bus", 3)) {
+				buf = pnp_get_resource_value(buf + 3,
+							     IORESOURCE_BUS,
+							     &start, &end,
+							     NULL);
+				pnp_add_bus_resource(dev, start, end);
+			} else
+				break;
 		}
 		mutex_unlock(&pnp_res_mutex);
 		goto done;

  reply	other threads:[~2012-04-11 20:48 UTC|newest]

Thread overview: 7+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2012-04-11 20:45 [PATCH V2 0/3] PNP: Allow PNP resources to be disabled (interface) Witold Szczeponik
2012-04-11 20:48 ` Witold Szczeponik [this message]
2012-04-11 20:49 ` [PATCH V2 2/3] PNP: Allow resources to be set as disabled Witold Szczeponik
2012-04-11 20:51 ` [PATCH 3/3] PNP: Handle IORESOURCE_BITS in resource allocation Witold Szczeponik
2012-04-24  5:45   ` Witold Szczeponik
2012-04-23 16:42 ` [PATCH V2 0/3] PNP: Allow PNP resources to be disabled (interface) Bjorn Helgaas
2012-06-03 17:47   ` Witold Szczeponik

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=4F85EE17.1080905@gmx.net \
    --to=witold.szczeponik@gmx.net \
    --cc=bhelgaas@google.com \
    --cc=lenb@kernel.org \
    --cc=linux-acpi@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.