* [PATCH V4 0/2] staging: iio: add isl29028 driver
@ 2012-04-12 14:01 ` Laxman Dewangan
0 siblings, 0 replies; 20+ messages in thread
From: Laxman Dewangan @ 2012-04-12 14:01 UTC (permalink / raw)
To: jic23, gregkh, grant.likely, rob.herring, jbrenner, rklein, max
Cc: linux-iio, devel, linux-kernel, devicetree-discuss, Laxman Dewangan
ISL29028 is concurrent Ambient light and proximity sensor
from intersil.
Adding driver for supporting this device.
Changes from V1:
- Taken care of cleanups comments.
Changes from V2:
- Implement the sampling frequency selection per channel wise.
- Remove documentation change as it is already there.
- Use the channel info for selecting proximity sampling rather than
exposing new sysfs from driver.
Changes from V3:
- change samp_freq to sampling_frequency
- Remove sysfs range and add scale through channel info.
Laxman Dewangan (2):
staging: iio: add channel info for sampling frequency
staging: iio: add driver for isl29028
drivers/staging/iio/iio.h | 5 +
drivers/staging/iio/industrialio-core.c | 1 +
drivers/staging/iio/light/Kconfig | 10 +
drivers/staging/iio/light/Makefile | 1 +
drivers/staging/iio/light/isl29028.c | 563 +++++++++++++++++++++++++++++++
5 files changed, 580 insertions(+), 0 deletions(-)
create mode 100644 drivers/staging/iio/light/isl29028.c
^ permalink raw reply [flat|nested] 20+ messages in thread
* [PATCH V4 0/2] staging: iio: add isl29028 driver
@ 2012-04-12 14:01 ` Laxman Dewangan
0 siblings, 0 replies; 20+ messages in thread
From: Laxman Dewangan @ 2012-04-12 14:01 UTC (permalink / raw)
To: jic23-KWPb1pKIrIJaa/9Udqfwiw,
gregkh-hQyY1W1yCW8ekmWlsbkhG0B+6BGkLq7r,
grant.likely-s3s/WqlpOiPyB63q8FvJNQ,
rob.herring-bsGFqQB8/DxBDgjK7y7TUQ,
jbrenner-yYKgigLBUwlBDgjK7y7TUQ, rklein-DDmLM1+adcrQT0dZR+AlfA,
max-U9r9yeDMy7A
Cc: linux-iio-u79uwXL29TY76Z2rM5mHXA,
devel-gWbeCf7V1WCQmaza687I9mD2FQJk+8+b,
linux-kernel-u79uwXL29TY76Z2rM5mHXA,
devicetree-discuss-uLR06cmDAlY/bJ5BZ2RsiQ, Laxman Dewangan
ISL29028 is concurrent Ambient light and proximity sensor
from intersil.
Adding driver for supporting this device.
Changes from V1:
- Taken care of cleanups comments.
Changes from V2:
- Implement the sampling frequency selection per channel wise.
- Remove documentation change as it is already there.
- Use the channel info for selecting proximity sampling rather than
exposing new sysfs from driver.
Changes from V3:
- change samp_freq to sampling_frequency
- Remove sysfs range and add scale through channel info.
Laxman Dewangan (2):
staging: iio: add channel info for sampling frequency
staging: iio: add driver for isl29028
drivers/staging/iio/iio.h | 5 +
drivers/staging/iio/industrialio-core.c | 1 +
drivers/staging/iio/light/Kconfig | 10 +
drivers/staging/iio/light/Makefile | 1 +
drivers/staging/iio/light/isl29028.c | 563 +++++++++++++++++++++++++++++++
5 files changed, 580 insertions(+), 0 deletions(-)
create mode 100644 drivers/staging/iio/light/isl29028.c
^ permalink raw reply [flat|nested] 20+ messages in thread
* [PATCH V4 1/2] staging: iio: add channel info for sampling frequency
2012-04-12 14:01 ` Laxman Dewangan
(?)
@ 2012-04-12 14:01 ` Laxman Dewangan
2012-04-12 14:27 ` Jonathan Cameron
-1 siblings, 1 reply; 20+ messages in thread
From: Laxman Dewangan @ 2012-04-12 14:01 UTC (permalink / raw)
To: jic23, gregkh, grant.likely, rob.herring, jbrenner, rklein, max
Cc: linux-iio, devel, linux-kernel, devicetree-discuss, Laxman Dewangan
Adding channel info IIO_CHAN_INFO_SAMP_FREQ to select
different sampling frequency per channel wise.
Signed-off-by: Laxman Dewangan <ldewangan@nvidia.com>
---
changes from V3:
- Change the info name to "sampling_frequency"
drivers/staging/iio/iio.h | 5 +++++
drivers/staging/iio/industrialio-core.c | 1 +
2 files changed, 6 insertions(+), 0 deletions(-)
diff --git a/drivers/staging/iio/iio.h b/drivers/staging/iio/iio.h
index b9cd454..9aa0dd5 100644
--- a/drivers/staging/iio/iio.h
+++ b/drivers/staging/iio/iio.h
@@ -36,6 +36,7 @@ enum iio_chan_info_enum {
IIO_CHAN_INFO_QUADRATURE_CORRECTION_RAW,
IIO_CHAN_INFO_AVERAGE_RAW,
IIO_CHAN_INFO_LOW_PASS_FILTER_3DB_FREQUENCY,
+ IIO_CHAN_INFO_SAMP_FREQ,
};
#define IIO_CHAN_INFO_SHARED_BIT(type) BIT(type*2)
@@ -81,6 +82,10 @@ enum iio_chan_info_enum {
#define IIO_CHAN_INFO_LOW_PASS_FILTER_3DB_FREQUENCY_SEPARATE_BIT \
IIO_CHAN_INFO_SEPARATE_BIT( \
IIO_CHAN_INFO_LOW_PASS_FILTER_3DB_FREQUENCY)
+#define IIO_CHAN_INFO_SAMP_FREQ_SEPARATE_BIT \
+ IIO_CHAN_INFO_SEPARATE_BIT(IIO_CHAN_INFO_SAMP_FREQ)
+#define IIO_CHAN_INFO_SAMP_FREQ_SHARED_BIT \
+ IIO_CHAN_INFO_SHARED_BIT(IIO_CHAN_INFO_SAMP_FREQ)
enum iio_endian {
IIO_CPU,
diff --git a/drivers/staging/iio/industrialio-core.c b/drivers/staging/iio/industrialio-core.c
index d303bfb..9e42713 100644
--- a/drivers/staging/iio/industrialio-core.c
+++ b/drivers/staging/iio/industrialio-core.c
@@ -90,6 +90,7 @@ static const char * const iio_chan_info_postfix[] = {
[IIO_CHAN_INFO_AVERAGE_RAW] = "mean_raw",
[IIO_CHAN_INFO_LOW_PASS_FILTER_3DB_FREQUENCY]
= "filter_low_pass_3db_frequency",
+ [IIO_CHAN_INFO_SAMP_FREQ] = "sampling_frequency",
};
const struct iio_chan_spec
--
1.7.1.1
^ permalink raw reply related [flat|nested] 20+ messages in thread
* [PATCH V4 2/2] staging: iio: add driver for isl29028
@ 2012-04-12 14:01 ` Laxman Dewangan
0 siblings, 0 replies; 20+ messages in thread
From: Laxman Dewangan @ 2012-04-12 14:01 UTC (permalink / raw)
To: jic23, gregkh, grant.likely, rob.herring, jbrenner, rklein, max
Cc: linux-iio, devel, linux-kernel, devicetree-discuss, Laxman Dewangan
Intersil's ISL29028 is concurrent Ambient Light and
Proximity Sensor device.
Add driver to access the light and IR intensity and
proximity value via iio interface.
Signed-off-by: Laxman Dewangan <ldewangan@nvidia.com>
---
Changes from V1:
- Taken care of cleanups comments.
Changes from V2:
- use the channel info for sampling frequency selection rather than
exposing separate sysfs from driver.
Changes from V3:
- Remove sysfs range and add scale through channel info.
drivers/staging/iio/light/Kconfig | 10 +
drivers/staging/iio/light/Makefile | 1 +
drivers/staging/iio/light/isl29028.c | 563 ++++++++++++++++++++++++++++++++++
3 files changed, 574 insertions(+), 0 deletions(-)
create mode 100644 drivers/staging/iio/light/isl29028.c
diff --git a/drivers/staging/iio/light/Kconfig b/drivers/staging/iio/light/Kconfig
index e7e9159..53b49f7 100644
--- a/drivers/staging/iio/light/Kconfig
+++ b/drivers/staging/iio/light/Kconfig
@@ -14,6 +14,16 @@ config SENSORS_ISL29018
in lux, proximity infrared sensing and normal infrared sensing.
Data from sensor is accessible via sysfs.
+config SENSORS_ISL29028
+ tristate "Intersil ISL29028 Concurrent Light and Proximity Sensor"
+ depends on I2C
+ select REGMAP_I2C
+ help
+ Provides driver for the Intersil's ISL29028 device.
+ This driver supports the sysfs interface to get the ALS, IR intensity,
+ Proximity value via iio. The ISL29028 provides the concurrent sensing
+ of ambient light and proximity.
+
config SENSORS_TSL2563
tristate "TAOS TSL2560, TSL2561, TSL2562 and TSL2563 ambient light sensors"
depends on I2C
diff --git a/drivers/staging/iio/light/Makefile b/drivers/staging/iio/light/Makefile
index 3011fbf..535d313 100644
--- a/drivers/staging/iio/light/Makefile
+++ b/drivers/staging/iio/light/Makefile
@@ -4,4 +4,5 @@
obj-$(CONFIG_SENSORS_TSL2563) += tsl2563.o
obj-$(CONFIG_SENSORS_ISL29018) += isl29018.o
+obj-$(CONFIG_SENSORS_ISL29028) += isl29028.o
obj-$(CONFIG_TSL2583) += tsl2583.o
diff --git a/drivers/staging/iio/light/isl29028.c b/drivers/staging/iio/light/isl29028.c
new file mode 100644
index 0000000..faa64f7
--- /dev/null
+++ b/drivers/staging/iio/light/isl29028.c
@@ -0,0 +1,563 @@
+/*
+ * IIO driver for the light sensor ISL29028.
+ * ISL29028 is Concurrent Ambient Light and Proximity Sensor
+ *
+ * Copyright (c) 2012, NVIDIA CORPORATION. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms and conditions of the GNU General Public License,
+ * version 2, as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program. If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#include <linux/module.h>
+#include <linux/i2c.h>
+#include <linux/err.h>
+#include <linux/mutex.h>
+#include <linux/delay.h>
+#include <linux/slab.h>
+#include <linux/regmap.h>
+#include "../iio.h"
+#include "../sysfs.h"
+
+#define CONVERSION_TIME_MS 100
+
+#define ISL29028_REG_CONFIGURE 0x01
+
+#define CONFIGURE_ALS_IR_MODE_ALS 0
+#define CONFIGURE_ALS_IR_MODE_IR BIT(0)
+#define CONFIGURE_ALS_IR_MODE_MASK BIT(0)
+
+#define CONFIGURE_ALS_RANGE_LOW_LUX 0
+#define CONFIGURE_ALS_RANGE_HIGH_LUX BIT(1)
+#define CONFIGURE_ALS_RANGE_MASK BIT(1)
+
+#define CONFIGURE_ALS_DIS 0
+#define CONFIGURE_ALS_EN BIT(2)
+#define CONFIGURE_ALS_EN_MASK BIT(2)
+
+#define CONFIGURE_PROX_DRIVE BIT(3)
+
+#define CONFIGURE_PROX_SLP_SH 4
+#define CONFIGURE_PROX_SLP_MASK (7 << CONFIGURE_PROX_SLP_SH)
+
+#define CONFIGURE_PROX_EN BIT(7)
+#define CONFIGURE_PROX_EN_MASK BIT(7)
+
+#define ISL29028_REG_INTERRUPT 0x02
+
+#define ISL29028_REG_PROX_DATA 0x08
+#define ISL29028_REG_ALSIR_L 0x09
+#define ISL29028_REG_ALSIR_U 0x0A
+
+#define ISL29028_REG_TEST1_MODE 0x0E
+#define ISL29028_REG_TEST2_MODE 0x0F
+
+#define ISL29028_MAX_REGS (ISL29028_REG_TEST2_MODE + 1)
+
+enum als_ir_mode {
+ MODE_NONE = 0,
+ MODE_ALS,
+ MODE_IR
+};
+
+struct isl29028_chip {
+ struct device *dev;
+ struct mutex lock;
+ struct regmap *regmap;
+
+ unsigned int prox_sampling;
+ bool enable_prox;
+
+ int lux_scale;
+ int als_ir_mode;
+};
+
+static int isl29028_set_proxim_sampling(struct isl29028_chip *chip,
+ unsigned int sampling)
+{
+ static unsigned int prox_period[] = {800, 400, 200, 100, 75, 50, 12, 0};
+ int sel;
+ unsigned int period = DIV_ROUND_UP(1000, sampling);
+
+ for (sel = 0; sel < ARRAY_SIZE(prox_period); ++sel) {
+ if (period >= prox_period[sel])
+ break;
+ }
+ return regmap_update_bits(chip->regmap, ISL29028_REG_CONFIGURE,
+ CONFIGURE_PROX_SLP_MASK, sel << CONFIGURE_PROX_SLP_SH);
+}
+
+static int isl29028_enable_proximity(struct isl29028_chip *chip, bool enable)
+{
+ int ret;
+ int val = 0;
+
+ if (enable)
+ val = CONFIGURE_PROX_EN;
+ ret = regmap_update_bits(chip->regmap, ISL29028_REG_CONFIGURE,
+ CONFIGURE_PROX_EN_MASK, val);
+ if (ret < 0)
+ return ret;
+
+ /* Wait for conversion to be complete for first sample */
+ mdelay(DIV_ROUND_UP(1000, chip->prox_sampling));
+ return 0;
+}
+
+static int isl29028_set_als_scale(struct isl29028_chip *chip, int lux_scale)
+{
+ int val = (lux_scale == 2000) ? CONFIGURE_ALS_RANGE_HIGH_LUX :
+ CONFIGURE_ALS_RANGE_LOW_LUX;
+
+ return regmap_update_bits(chip->regmap, ISL29028_REG_CONFIGURE,
+ CONFIGURE_ALS_RANGE_MASK, val);
+}
+
+static int isl29028_set_als_ir_mode(struct isl29028_chip *chip,
+ enum als_ir_mode mode)
+{
+ int ret = 0;
+
+ switch (mode) {
+ case MODE_ALS:
+ ret = regmap_update_bits(chip->regmap, ISL29028_REG_CONFIGURE,
+ CONFIGURE_ALS_IR_MODE_MASK, CONFIGURE_ALS_IR_MODE_ALS);
+ if (ret < 0)
+ return ret;
+
+ ret = regmap_update_bits(chip->regmap, ISL29028_REG_CONFIGURE,
+ CONFIGURE_ALS_RANGE_MASK, CONFIGURE_ALS_RANGE_HIGH_LUX);
+ break;
+
+ case MODE_IR:
+ ret = regmap_update_bits(chip->regmap, ISL29028_REG_CONFIGURE,
+ CONFIGURE_ALS_IR_MODE_MASK, CONFIGURE_ALS_IR_MODE_IR);
+ break;
+
+ case MODE_NONE:
+ return regmap_update_bits(chip->regmap, ISL29028_REG_CONFIGURE,
+ CONFIGURE_ALS_EN_MASK, CONFIGURE_ALS_DIS);
+ }
+
+ if (ret < 0)
+ return ret;
+
+ /* Enable the ALS/IR */
+ ret = regmap_update_bits(chip->regmap, ISL29028_REG_CONFIGURE,
+ CONFIGURE_ALS_EN_MASK, CONFIGURE_ALS_EN);
+ if (ret < 0)
+ return ret;
+
+ /* Need to wait for conversion time if ALS/IR mode enabled */
+ mdelay(CONVERSION_TIME_MS);
+ return 0;
+}
+
+static int isl29028_read_als_ir(struct isl29028_chip *chip, int *als_ir)
+{
+ unsigned int lsb;
+ unsigned int msb;
+ int ret;
+
+ ret = regmap_read(chip->regmap, ISL29028_REG_ALSIR_L, &lsb);
+ if (ret < 0) {
+ dev_err(chip->dev,
+ "Error in reading register ALSIR_L err %d\n", ret);
+ return ret;
+ }
+
+ ret = regmap_read(chip->regmap, ISL29028_REG_ALSIR_U, &msb);
+ if (ret < 0) {
+ dev_err(chip->dev,
+ "Error in reading register ALSIR_U err %d\n", ret);
+ return ret;
+ }
+
+ *als_ir = ((msb & 0xF) << 8) | (lsb & 0xFF);
+ return 0;
+}
+
+static int isl29028_read_proxim(struct isl29028_chip *chip, int *prox)
+{
+ unsigned int data;
+ int ret;
+
+ ret = regmap_read(chip->regmap, ISL29028_REG_PROX_DATA, &data);
+ if (ret < 0) {
+ dev_err(chip->dev, "Error in reading register %d, error %d\n",
+ ISL29028_REG_PROX_DATA, ret);
+ return ret;
+ }
+ *prox = data;
+ return 0;
+}
+
+static int isl29028_proxim_get(struct isl29028_chip *chip, int *prox_data)
+{
+ int ret;
+
+ if (!chip->enable_prox) {
+ ret = isl29028_enable_proximity(chip, true);
+ if (ret < 0)
+ return ret;
+ chip->enable_prox = true;
+ }
+ return isl29028_read_proxim(chip, prox_data);
+}
+
+static int isl29028_als_get(struct isl29028_chip *chip, int *als_data)
+{
+ int ret;
+ int als_ir_data;
+
+ if (chip->als_ir_mode != MODE_ALS) {
+ ret = isl29028_set_als_ir_mode(chip, MODE_ALS);
+ if (ret < 0) {
+ dev_err(chip->dev,
+ "Error in enabling ALS mode err %d\n", ret);
+ return ret;
+ }
+ chip->als_ir_mode = MODE_ALS;
+ }
+
+ ret = isl29028_read_als_ir(chip, &als_ir_data);
+ if (ret < 0)
+ return ret;
+
+ /*
+ * convert als data count to lux.
+ * if lux_scale = 125, lux = count * 0.031
+ * if lux_scale = 2000, lux = count * 0.49
+ */
+ if (chip->lux_scale == 125)
+ als_ir_data = (als_ir_data * 31) / 1000;
+ else
+ als_ir_data = (als_ir_data * 49) / 100;
+
+ *als_data = als_ir_data;
+ return 0;
+}
+
+static int isl29028_ir_get(struct isl29028_chip *chip, int *ir_data)
+{
+ int ret;
+
+ if (chip->als_ir_mode != MODE_IR) {
+ ret = isl29028_set_als_ir_mode(chip, MODE_IR);
+ if (ret < 0) {
+ dev_err(chip->dev,
+ "Error in enabling IR mode err %d\n", ret);
+ return ret;
+ }
+ chip->als_ir_mode = MODE_IR;
+ }
+ return isl29028_read_als_ir(chip, ir_data);
+}
+
+/* Channel IO */
+static int isl29028_write_raw(struct iio_dev *indio_dev,
+ struct iio_chan_spec const *chan, int val, int val2, long mask)
+{
+ struct isl29028_chip *chip = iio_priv(indio_dev);
+ int ret = -EINVAL;
+
+ mutex_lock(&chip->lock);
+ switch (chan->type) {
+ case IIO_PROXIMITY:
+ if (mask != IIO_CHAN_INFO_SAMP_FREQ_SEPARATE_BIT) {
+ dev_err(chip->dev,
+ "proximity: mask value 0x%08lx not supported\n",
+ mask);
+ break;
+ }
+ if (val < 1 || val > 100) {
+ dev_err(chip->dev,
+ "Samp_freq %d is not in range[1:100]\n", val);
+ break;
+ }
+ ret = isl29028_set_proxim_sampling(chip, val);
+ if (ret < 0) {
+ dev_err(chip->dev,
+ "Setting proximity samp_freq fail, err %d\n",
+ ret);
+ break;
+ }
+ chip->prox_sampling = val;
+ break;
+
+ case IIO_LIGHT:
+ if (mask != IIO_CHAN_INFO_SCALE_SEPARATE_BIT) {
+ dev_err(chip->dev,
+ "light: mask value 0x%08lx not supported\n",
+ mask);
+ break;
+ }
+ if ((val != 125) && (val != 2000)) {
+ dev_err(chip->dev,
+ "lux scale %d is invalid [125, 2000]\n", val);
+ break;
+ }
+ ret = isl29028_set_als_scale(chip, val);
+ if (ret < 0) {
+ dev_err(chip->dev,
+ "Setting lux scale fail with error %d\n", ret);
+ break;
+ }
+ chip->lux_scale = val;
+ break;
+
+ default:
+ dev_err(chip->dev, "Unsupported channel type\n");
+ break;
+ }
+ mutex_unlock(&chip->lock);
+ return ret;
+}
+
+static int isl29028_read_raw(struct iio_dev *indio_dev,
+ struct iio_chan_spec const *chan, int *val, int *val2, long mask)
+{
+ struct isl29028_chip *chip = iio_priv(indio_dev);
+ int ret = -EINVAL;
+
+ mutex_lock(&chip->lock);
+ switch (mask) {
+ case 0:
+ switch (chan->type) {
+ case IIO_LIGHT:
+ ret = isl29028_als_get(chip, val);
+ break;
+ case IIO_INTENSITY:
+ ret = isl29028_ir_get(chip, val);
+ break;
+ case IIO_PROXIMITY:
+ ret = isl29028_proxim_get(chip, val);
+ break;
+ default:
+ break;
+ }
+ if (ret < 0)
+ break;
+ ret = IIO_VAL_INT;
+ break;
+
+ case IIO_CHAN_INFO_SAMP_FREQ_SEPARATE_BIT:
+ if (chan->type != IIO_PROXIMITY)
+ break;
+ *val = chip->prox_sampling;
+ ret = IIO_VAL_INT;
+ break;
+
+ case IIO_CHAN_INFO_SCALE_SEPARATE_BIT:
+ if (chan->type != IIO_LIGHT)
+ break;
+ *val = chip->lux_scale;
+ ret = IIO_VAL_INT;
+ break;
+
+ default:
+ dev_err(chip->dev, "mask value 0x%08lx not supported\n", mask);
+ break;
+ }
+ mutex_unlock(&chip->lock);
+ return ret;
+}
+
+static IIO_CONST_ATTR(proximity_sampling_frequency_available,
+ "1, 3, 5, 10, 13, 20, 83, 100");
+static IIO_CONST_ATTR(illuminance_scale_available, "125, 2000");
+
+#define ISL29028_DEV_ATTR(name) (&iio_dev_attr_##name.dev_attr.attr)
+#define ISL29028_CONST_ATTR(name) (&iio_const_attr_##name.dev_attr.attr)
+static struct attribute *isl29028_attributes[] = {
+ ISL29028_CONST_ATTR(proximity_sampling_frequency_available),
+ ISL29028_CONST_ATTR(illuminance_scale_available),
+ NULL,
+};
+
+static const struct attribute_group isl29108_group = {
+ .attrs = isl29028_attributes,
+};
+
+static const struct iio_chan_spec isl29028_channels[] = {
+ {
+ .type = IIO_LIGHT,
+ .processed_val = 1,
+ .info_mask = IIO_CHAN_INFO_SCALE_SEPARATE_BIT,
+ }, {
+ .type = IIO_INTENSITY,
+ }, {
+ .type = IIO_PROXIMITY,
+ .info_mask = IIO_CHAN_INFO_SAMP_FREQ_SEPARATE_BIT,
+ }
+};
+
+static const struct iio_info isl29028_info = {
+ .attrs = &isl29108_group,
+ .driver_module = THIS_MODULE,
+ .read_raw = &isl29028_read_raw,
+ .write_raw = &isl29028_write_raw,
+};
+
+static int isl29028_chip_init(struct isl29028_chip *chip)
+{
+ int ret;
+
+ chip->enable_prox = false;
+ chip->prox_sampling = 20;
+ chip->lux_scale = 2000;
+ chip->als_ir_mode = MODE_NONE;
+
+ ret = regmap_write(chip->regmap, ISL29028_REG_TEST1_MODE, 0x0);
+ if (ret < 0) {
+ dev_err(chip->dev, "%s(): write to reg %d failed, err = %d\n",
+ __func__, ISL29028_REG_TEST1_MODE, ret);
+ return ret;
+ }
+ ret = regmap_write(chip->regmap, ISL29028_REG_TEST2_MODE, 0x0);
+ if (ret < 0) {
+ dev_err(chip->dev, "%s(): write to reg %d failed, err = %d\n",
+ __func__, ISL29028_REG_TEST2_MODE, ret);
+ return ret;
+ }
+
+ ret = regmap_write(chip->regmap, ISL29028_REG_CONFIGURE, 0x0);
+ if (ret < 0) {
+ dev_err(chip->dev, "%s(): write to reg %d failed, err = %d\n",
+ __func__, ISL29028_REG_CONFIGURE, ret);
+ return ret;
+ }
+
+ ret = isl29028_set_proxim_sampling(chip, chip->prox_sampling);
+ if (ret < 0) {
+ dev_err(chip->dev, "%s(): setting the proximity, err = %d\n",
+ __func__, ret);
+ return ret;
+ }
+
+ ret = isl29028_set_als_scale(chip, chip->lux_scale);
+ if (ret < 0)
+ dev_err(chip->dev, "%s(): setting als scale failed, err = %d\n",
+ __func__, ret);
+ return ret;
+}
+
+static bool is_volatile_reg(struct device *dev, unsigned int reg)
+{
+ switch (reg) {
+ case ISL29028_REG_INTERRUPT:
+ case ISL29028_REG_PROX_DATA:
+ case ISL29028_REG_ALSIR_L:
+ case ISL29028_REG_ALSIR_U:
+ return true;
+ default:
+ return false;
+ }
+}
+
+static const struct regmap_config isl29028_regmap_config = {
+ .reg_bits = 8,
+ .val_bits = 8,
+ .volatile_reg = is_volatile_reg,
+ .max_register = ISL29028_MAX_REGS - 1,
+ .num_reg_defaults_raw = ISL29028_MAX_REGS,
+ .cache_type = REGCACHE_RBTREE,
+};
+
+static int __devinit isl29028_probe(struct i2c_client *client,
+ const struct i2c_device_id *id)
+{
+ struct isl29028_chip *chip;
+ struct iio_dev *indio_dev;
+ int ret;
+
+ indio_dev = iio_allocate_device(sizeof(*chip));
+ if (!indio_dev) {
+ dev_err(&client->dev, "iio allocation fails\n");
+ return -ENOMEM;
+ }
+
+ chip = iio_priv(indio_dev);
+
+ i2c_set_clientdata(client, indio_dev);
+ chip->dev = &client->dev;
+ mutex_init(&chip->lock);
+
+ chip->regmap = devm_regmap_init_i2c(client, &isl29028_regmap_config);
+ if (IS_ERR(chip->regmap)) {
+ ret = PTR_ERR(chip->regmap);
+ dev_err(chip->dev, "regmap initialization failed: %d\n", ret);
+ goto exit_iio_free;
+ }
+
+ ret = isl29028_chip_init(chip);
+ if (ret < 0) {
+ dev_err(chip->dev, "chip initialization failed: %d\n", ret);
+ goto exit_iio_free;
+ }
+
+ indio_dev->info = &isl29028_info;
+ indio_dev->channels = isl29028_channels;
+ indio_dev->num_channels = ARRAY_SIZE(isl29028_channels);
+ indio_dev->name = id->name;
+ indio_dev->dev.parent = &client->dev;
+ indio_dev->modes = INDIO_DIRECT_MODE;
+ ret = iio_device_register(indio_dev);
+ if (ret < 0) {
+ dev_err(chip->dev, "iio registration fails with error %d\n",
+ ret);
+ goto exit_iio_free;
+ }
+ return 0;
+
+exit_iio_free:
+ iio_free_device(indio_dev);
+ return ret;
+}
+
+static int __devexit isl29028_remove(struct i2c_client *client)
+{
+ struct iio_dev *indio_dev = i2c_get_clientdata(client);
+
+ iio_device_unregister(indio_dev);
+ iio_free_device(indio_dev);
+ return 0;
+}
+
+static const struct i2c_device_id isl29028_id[] = {
+ {"isl29028", 0},
+ {}
+};
+MODULE_DEVICE_TABLE(i2c, isl29028_id);
+
+static const struct of_device_id isl29028_of_match[] = {
+ { .compatible = "isl,isl29028", },
+ { },
+};
+MODULE_DEVICE_TABLE(of, isl29028_of_match);
+
+static struct i2c_driver isl29028_driver = {
+ .class = I2C_CLASS_HWMON,
+ .driver = {
+ .name = "isl29028",
+ .owner = THIS_MODULE,
+ .of_match_table = isl29028_of_match,
+ },
+ .probe = isl29028_probe,
+ .remove = __devexit_p(isl29028_remove),
+ .id_table = isl29028_id,
+};
+
+module_i2c_driver(isl29028_driver);
+
+MODULE_DESCRIPTION("ISL29028 Ambient Light and Proximity Sensor driver");
+MODULE_LICENSE("GPL v2");
+MODULE_AUTHOR("Laxman Dewangan <ldewangan@nvidia.com>");
--
1.7.1.1
^ permalink raw reply related [flat|nested] 20+ messages in thread
* [PATCH V4 2/2] staging: iio: add driver for isl29028
@ 2012-04-12 14:01 ` Laxman Dewangan
0 siblings, 0 replies; 20+ messages in thread
From: Laxman Dewangan @ 2012-04-12 14:01 UTC (permalink / raw)
To: jic23-KWPb1pKIrIJaa/9Udqfwiw,
gregkh-hQyY1W1yCW8ekmWlsbkhG0B+6BGkLq7r,
grant.likely-s3s/WqlpOiPyB63q8FvJNQ,
rob.herring-bsGFqQB8/DxBDgjK7y7TUQ,
jbrenner-yYKgigLBUwlBDgjK7y7TUQ, rklein-DDmLM1+adcrQT0dZR+AlfA,
max-U9r9yeDMy7A
Cc: linux-iio-u79uwXL29TY76Z2rM5mHXA,
devel-gWbeCf7V1WCQmaza687I9mD2FQJk+8+b,
linux-kernel-u79uwXL29TY76Z2rM5mHXA,
devicetree-discuss-uLR06cmDAlY/bJ5BZ2RsiQ, Laxman Dewangan
Intersil's ISL29028 is concurrent Ambient Light and
Proximity Sensor device.
Add driver to access the light and IR intensity and
proximity value via iio interface.
Signed-off-by: Laxman Dewangan <ldewangan-DDmLM1+adcrQT0dZR+AlfA@public.gmane.org>
---
Changes from V1:
- Taken care of cleanups comments.
Changes from V2:
- use the channel info for sampling frequency selection rather than
exposing separate sysfs from driver.
Changes from V3:
- Remove sysfs range and add scale through channel info.
drivers/staging/iio/light/Kconfig | 10 +
drivers/staging/iio/light/Makefile | 1 +
drivers/staging/iio/light/isl29028.c | 563 ++++++++++++++++++++++++++++++++++
3 files changed, 574 insertions(+), 0 deletions(-)
create mode 100644 drivers/staging/iio/light/isl29028.c
diff --git a/drivers/staging/iio/light/Kconfig b/drivers/staging/iio/light/Kconfig
index e7e9159..53b49f7 100644
--- a/drivers/staging/iio/light/Kconfig
+++ b/drivers/staging/iio/light/Kconfig
@@ -14,6 +14,16 @@ config SENSORS_ISL29018
in lux, proximity infrared sensing and normal infrared sensing.
Data from sensor is accessible via sysfs.
+config SENSORS_ISL29028
+ tristate "Intersil ISL29028 Concurrent Light and Proximity Sensor"
+ depends on I2C
+ select REGMAP_I2C
+ help
+ Provides driver for the Intersil's ISL29028 device.
+ This driver supports the sysfs interface to get the ALS, IR intensity,
+ Proximity value via iio. The ISL29028 provides the concurrent sensing
+ of ambient light and proximity.
+
config SENSORS_TSL2563
tristate "TAOS TSL2560, TSL2561, TSL2562 and TSL2563 ambient light sensors"
depends on I2C
diff --git a/drivers/staging/iio/light/Makefile b/drivers/staging/iio/light/Makefile
index 3011fbf..535d313 100644
--- a/drivers/staging/iio/light/Makefile
+++ b/drivers/staging/iio/light/Makefile
@@ -4,4 +4,5 @@
obj-$(CONFIG_SENSORS_TSL2563) += tsl2563.o
obj-$(CONFIG_SENSORS_ISL29018) += isl29018.o
+obj-$(CONFIG_SENSORS_ISL29028) += isl29028.o
obj-$(CONFIG_TSL2583) += tsl2583.o
diff --git a/drivers/staging/iio/light/isl29028.c b/drivers/staging/iio/light/isl29028.c
new file mode 100644
index 0000000..faa64f7
--- /dev/null
+++ b/drivers/staging/iio/light/isl29028.c
@@ -0,0 +1,563 @@
+/*
+ * IIO driver for the light sensor ISL29028.
+ * ISL29028 is Concurrent Ambient Light and Proximity Sensor
+ *
+ * Copyright (c) 2012, NVIDIA CORPORATION. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms and conditions of the GNU General Public License,
+ * version 2, as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program. If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#include <linux/module.h>
+#include <linux/i2c.h>
+#include <linux/err.h>
+#include <linux/mutex.h>
+#include <linux/delay.h>
+#include <linux/slab.h>
+#include <linux/regmap.h>
+#include "../iio.h"
+#include "../sysfs.h"
+
+#define CONVERSION_TIME_MS 100
+
+#define ISL29028_REG_CONFIGURE 0x01
+
+#define CONFIGURE_ALS_IR_MODE_ALS 0
+#define CONFIGURE_ALS_IR_MODE_IR BIT(0)
+#define CONFIGURE_ALS_IR_MODE_MASK BIT(0)
+
+#define CONFIGURE_ALS_RANGE_LOW_LUX 0
+#define CONFIGURE_ALS_RANGE_HIGH_LUX BIT(1)
+#define CONFIGURE_ALS_RANGE_MASK BIT(1)
+
+#define CONFIGURE_ALS_DIS 0
+#define CONFIGURE_ALS_EN BIT(2)
+#define CONFIGURE_ALS_EN_MASK BIT(2)
+
+#define CONFIGURE_PROX_DRIVE BIT(3)
+
+#define CONFIGURE_PROX_SLP_SH 4
+#define CONFIGURE_PROX_SLP_MASK (7 << CONFIGURE_PROX_SLP_SH)
+
+#define CONFIGURE_PROX_EN BIT(7)
+#define CONFIGURE_PROX_EN_MASK BIT(7)
+
+#define ISL29028_REG_INTERRUPT 0x02
+
+#define ISL29028_REG_PROX_DATA 0x08
+#define ISL29028_REG_ALSIR_L 0x09
+#define ISL29028_REG_ALSIR_U 0x0A
+
+#define ISL29028_REG_TEST1_MODE 0x0E
+#define ISL29028_REG_TEST2_MODE 0x0F
+
+#define ISL29028_MAX_REGS (ISL29028_REG_TEST2_MODE + 1)
+
+enum als_ir_mode {
+ MODE_NONE = 0,
+ MODE_ALS,
+ MODE_IR
+};
+
+struct isl29028_chip {
+ struct device *dev;
+ struct mutex lock;
+ struct regmap *regmap;
+
+ unsigned int prox_sampling;
+ bool enable_prox;
+
+ int lux_scale;
+ int als_ir_mode;
+};
+
+static int isl29028_set_proxim_sampling(struct isl29028_chip *chip,
+ unsigned int sampling)
+{
+ static unsigned int prox_period[] = {800, 400, 200, 100, 75, 50, 12, 0};
+ int sel;
+ unsigned int period = DIV_ROUND_UP(1000, sampling);
+
+ for (sel = 0; sel < ARRAY_SIZE(prox_period); ++sel) {
+ if (period >= prox_period[sel])
+ break;
+ }
+ return regmap_update_bits(chip->regmap, ISL29028_REG_CONFIGURE,
+ CONFIGURE_PROX_SLP_MASK, sel << CONFIGURE_PROX_SLP_SH);
+}
+
+static int isl29028_enable_proximity(struct isl29028_chip *chip, bool enable)
+{
+ int ret;
+ int val = 0;
+
+ if (enable)
+ val = CONFIGURE_PROX_EN;
+ ret = regmap_update_bits(chip->regmap, ISL29028_REG_CONFIGURE,
+ CONFIGURE_PROX_EN_MASK, val);
+ if (ret < 0)
+ return ret;
+
+ /* Wait for conversion to be complete for first sample */
+ mdelay(DIV_ROUND_UP(1000, chip->prox_sampling));
+ return 0;
+}
+
+static int isl29028_set_als_scale(struct isl29028_chip *chip, int lux_scale)
+{
+ int val = (lux_scale == 2000) ? CONFIGURE_ALS_RANGE_HIGH_LUX :
+ CONFIGURE_ALS_RANGE_LOW_LUX;
+
+ return regmap_update_bits(chip->regmap, ISL29028_REG_CONFIGURE,
+ CONFIGURE_ALS_RANGE_MASK, val);
+}
+
+static int isl29028_set_als_ir_mode(struct isl29028_chip *chip,
+ enum als_ir_mode mode)
+{
+ int ret = 0;
+
+ switch (mode) {
+ case MODE_ALS:
+ ret = regmap_update_bits(chip->regmap, ISL29028_REG_CONFIGURE,
+ CONFIGURE_ALS_IR_MODE_MASK, CONFIGURE_ALS_IR_MODE_ALS);
+ if (ret < 0)
+ return ret;
+
+ ret = regmap_update_bits(chip->regmap, ISL29028_REG_CONFIGURE,
+ CONFIGURE_ALS_RANGE_MASK, CONFIGURE_ALS_RANGE_HIGH_LUX);
+ break;
+
+ case MODE_IR:
+ ret = regmap_update_bits(chip->regmap, ISL29028_REG_CONFIGURE,
+ CONFIGURE_ALS_IR_MODE_MASK, CONFIGURE_ALS_IR_MODE_IR);
+ break;
+
+ case MODE_NONE:
+ return regmap_update_bits(chip->regmap, ISL29028_REG_CONFIGURE,
+ CONFIGURE_ALS_EN_MASK, CONFIGURE_ALS_DIS);
+ }
+
+ if (ret < 0)
+ return ret;
+
+ /* Enable the ALS/IR */
+ ret = regmap_update_bits(chip->regmap, ISL29028_REG_CONFIGURE,
+ CONFIGURE_ALS_EN_MASK, CONFIGURE_ALS_EN);
+ if (ret < 0)
+ return ret;
+
+ /* Need to wait for conversion time if ALS/IR mode enabled */
+ mdelay(CONVERSION_TIME_MS);
+ return 0;
+}
+
+static int isl29028_read_als_ir(struct isl29028_chip *chip, int *als_ir)
+{
+ unsigned int lsb;
+ unsigned int msb;
+ int ret;
+
+ ret = regmap_read(chip->regmap, ISL29028_REG_ALSIR_L, &lsb);
+ if (ret < 0) {
+ dev_err(chip->dev,
+ "Error in reading register ALSIR_L err %d\n", ret);
+ return ret;
+ }
+
+ ret = regmap_read(chip->regmap, ISL29028_REG_ALSIR_U, &msb);
+ if (ret < 0) {
+ dev_err(chip->dev,
+ "Error in reading register ALSIR_U err %d\n", ret);
+ return ret;
+ }
+
+ *als_ir = ((msb & 0xF) << 8) | (lsb & 0xFF);
+ return 0;
+}
+
+static int isl29028_read_proxim(struct isl29028_chip *chip, int *prox)
+{
+ unsigned int data;
+ int ret;
+
+ ret = regmap_read(chip->regmap, ISL29028_REG_PROX_DATA, &data);
+ if (ret < 0) {
+ dev_err(chip->dev, "Error in reading register %d, error %d\n",
+ ISL29028_REG_PROX_DATA, ret);
+ return ret;
+ }
+ *prox = data;
+ return 0;
+}
+
+static int isl29028_proxim_get(struct isl29028_chip *chip, int *prox_data)
+{
+ int ret;
+
+ if (!chip->enable_prox) {
+ ret = isl29028_enable_proximity(chip, true);
+ if (ret < 0)
+ return ret;
+ chip->enable_prox = true;
+ }
+ return isl29028_read_proxim(chip, prox_data);
+}
+
+static int isl29028_als_get(struct isl29028_chip *chip, int *als_data)
+{
+ int ret;
+ int als_ir_data;
+
+ if (chip->als_ir_mode != MODE_ALS) {
+ ret = isl29028_set_als_ir_mode(chip, MODE_ALS);
+ if (ret < 0) {
+ dev_err(chip->dev,
+ "Error in enabling ALS mode err %d\n", ret);
+ return ret;
+ }
+ chip->als_ir_mode = MODE_ALS;
+ }
+
+ ret = isl29028_read_als_ir(chip, &als_ir_data);
+ if (ret < 0)
+ return ret;
+
+ /*
+ * convert als data count to lux.
+ * if lux_scale = 125, lux = count * 0.031
+ * if lux_scale = 2000, lux = count * 0.49
+ */
+ if (chip->lux_scale == 125)
+ als_ir_data = (als_ir_data * 31) / 1000;
+ else
+ als_ir_data = (als_ir_data * 49) / 100;
+
+ *als_data = als_ir_data;
+ return 0;
+}
+
+static int isl29028_ir_get(struct isl29028_chip *chip, int *ir_data)
+{
+ int ret;
+
+ if (chip->als_ir_mode != MODE_IR) {
+ ret = isl29028_set_als_ir_mode(chip, MODE_IR);
+ if (ret < 0) {
+ dev_err(chip->dev,
+ "Error in enabling IR mode err %d\n", ret);
+ return ret;
+ }
+ chip->als_ir_mode = MODE_IR;
+ }
+ return isl29028_read_als_ir(chip, ir_data);
+}
+
+/* Channel IO */
+static int isl29028_write_raw(struct iio_dev *indio_dev,
+ struct iio_chan_spec const *chan, int val, int val2, long mask)
+{
+ struct isl29028_chip *chip = iio_priv(indio_dev);
+ int ret = -EINVAL;
+
+ mutex_lock(&chip->lock);
+ switch (chan->type) {
+ case IIO_PROXIMITY:
+ if (mask != IIO_CHAN_INFO_SAMP_FREQ_SEPARATE_BIT) {
+ dev_err(chip->dev,
+ "proximity: mask value 0x%08lx not supported\n",
+ mask);
+ break;
+ }
+ if (val < 1 || val > 100) {
+ dev_err(chip->dev,
+ "Samp_freq %d is not in range[1:100]\n", val);
+ break;
+ }
+ ret = isl29028_set_proxim_sampling(chip, val);
+ if (ret < 0) {
+ dev_err(chip->dev,
+ "Setting proximity samp_freq fail, err %d\n",
+ ret);
+ break;
+ }
+ chip->prox_sampling = val;
+ break;
+
+ case IIO_LIGHT:
+ if (mask != IIO_CHAN_INFO_SCALE_SEPARATE_BIT) {
+ dev_err(chip->dev,
+ "light: mask value 0x%08lx not supported\n",
+ mask);
+ break;
+ }
+ if ((val != 125) && (val != 2000)) {
+ dev_err(chip->dev,
+ "lux scale %d is invalid [125, 2000]\n", val);
+ break;
+ }
+ ret = isl29028_set_als_scale(chip, val);
+ if (ret < 0) {
+ dev_err(chip->dev,
+ "Setting lux scale fail with error %d\n", ret);
+ break;
+ }
+ chip->lux_scale = val;
+ break;
+
+ default:
+ dev_err(chip->dev, "Unsupported channel type\n");
+ break;
+ }
+ mutex_unlock(&chip->lock);
+ return ret;
+}
+
+static int isl29028_read_raw(struct iio_dev *indio_dev,
+ struct iio_chan_spec const *chan, int *val, int *val2, long mask)
+{
+ struct isl29028_chip *chip = iio_priv(indio_dev);
+ int ret = -EINVAL;
+
+ mutex_lock(&chip->lock);
+ switch (mask) {
+ case 0:
+ switch (chan->type) {
+ case IIO_LIGHT:
+ ret = isl29028_als_get(chip, val);
+ break;
+ case IIO_INTENSITY:
+ ret = isl29028_ir_get(chip, val);
+ break;
+ case IIO_PROXIMITY:
+ ret = isl29028_proxim_get(chip, val);
+ break;
+ default:
+ break;
+ }
+ if (ret < 0)
+ break;
+ ret = IIO_VAL_INT;
+ break;
+
+ case IIO_CHAN_INFO_SAMP_FREQ_SEPARATE_BIT:
+ if (chan->type != IIO_PROXIMITY)
+ break;
+ *val = chip->prox_sampling;
+ ret = IIO_VAL_INT;
+ break;
+
+ case IIO_CHAN_INFO_SCALE_SEPARATE_BIT:
+ if (chan->type != IIO_LIGHT)
+ break;
+ *val = chip->lux_scale;
+ ret = IIO_VAL_INT;
+ break;
+
+ default:
+ dev_err(chip->dev, "mask value 0x%08lx not supported\n", mask);
+ break;
+ }
+ mutex_unlock(&chip->lock);
+ return ret;
+}
+
+static IIO_CONST_ATTR(proximity_sampling_frequency_available,
+ "1, 3, 5, 10, 13, 20, 83, 100");
+static IIO_CONST_ATTR(illuminance_scale_available, "125, 2000");
+
+#define ISL29028_DEV_ATTR(name) (&iio_dev_attr_##name.dev_attr.attr)
+#define ISL29028_CONST_ATTR(name) (&iio_const_attr_##name.dev_attr.attr)
+static struct attribute *isl29028_attributes[] = {
+ ISL29028_CONST_ATTR(proximity_sampling_frequency_available),
+ ISL29028_CONST_ATTR(illuminance_scale_available),
+ NULL,
+};
+
+static const struct attribute_group isl29108_group = {
+ .attrs = isl29028_attributes,
+};
+
+static const struct iio_chan_spec isl29028_channels[] = {
+ {
+ .type = IIO_LIGHT,
+ .processed_val = 1,
+ .info_mask = IIO_CHAN_INFO_SCALE_SEPARATE_BIT,
+ }, {
+ .type = IIO_INTENSITY,
+ }, {
+ .type = IIO_PROXIMITY,
+ .info_mask = IIO_CHAN_INFO_SAMP_FREQ_SEPARATE_BIT,
+ }
+};
+
+static const struct iio_info isl29028_info = {
+ .attrs = &isl29108_group,
+ .driver_module = THIS_MODULE,
+ .read_raw = &isl29028_read_raw,
+ .write_raw = &isl29028_write_raw,
+};
+
+static int isl29028_chip_init(struct isl29028_chip *chip)
+{
+ int ret;
+
+ chip->enable_prox = false;
+ chip->prox_sampling = 20;
+ chip->lux_scale = 2000;
+ chip->als_ir_mode = MODE_NONE;
+
+ ret = regmap_write(chip->regmap, ISL29028_REG_TEST1_MODE, 0x0);
+ if (ret < 0) {
+ dev_err(chip->dev, "%s(): write to reg %d failed, err = %d\n",
+ __func__, ISL29028_REG_TEST1_MODE, ret);
+ return ret;
+ }
+ ret = regmap_write(chip->regmap, ISL29028_REG_TEST2_MODE, 0x0);
+ if (ret < 0) {
+ dev_err(chip->dev, "%s(): write to reg %d failed, err = %d\n",
+ __func__, ISL29028_REG_TEST2_MODE, ret);
+ return ret;
+ }
+
+ ret = regmap_write(chip->regmap, ISL29028_REG_CONFIGURE, 0x0);
+ if (ret < 0) {
+ dev_err(chip->dev, "%s(): write to reg %d failed, err = %d\n",
+ __func__, ISL29028_REG_CONFIGURE, ret);
+ return ret;
+ }
+
+ ret = isl29028_set_proxim_sampling(chip, chip->prox_sampling);
+ if (ret < 0) {
+ dev_err(chip->dev, "%s(): setting the proximity, err = %d\n",
+ __func__, ret);
+ return ret;
+ }
+
+ ret = isl29028_set_als_scale(chip, chip->lux_scale);
+ if (ret < 0)
+ dev_err(chip->dev, "%s(): setting als scale failed, err = %d\n",
+ __func__, ret);
+ return ret;
+}
+
+static bool is_volatile_reg(struct device *dev, unsigned int reg)
+{
+ switch (reg) {
+ case ISL29028_REG_INTERRUPT:
+ case ISL29028_REG_PROX_DATA:
+ case ISL29028_REG_ALSIR_L:
+ case ISL29028_REG_ALSIR_U:
+ return true;
+ default:
+ return false;
+ }
+}
+
+static const struct regmap_config isl29028_regmap_config = {
+ .reg_bits = 8,
+ .val_bits = 8,
+ .volatile_reg = is_volatile_reg,
+ .max_register = ISL29028_MAX_REGS - 1,
+ .num_reg_defaults_raw = ISL29028_MAX_REGS,
+ .cache_type = REGCACHE_RBTREE,
+};
+
+static int __devinit isl29028_probe(struct i2c_client *client,
+ const struct i2c_device_id *id)
+{
+ struct isl29028_chip *chip;
+ struct iio_dev *indio_dev;
+ int ret;
+
+ indio_dev = iio_allocate_device(sizeof(*chip));
+ if (!indio_dev) {
+ dev_err(&client->dev, "iio allocation fails\n");
+ return -ENOMEM;
+ }
+
+ chip = iio_priv(indio_dev);
+
+ i2c_set_clientdata(client, indio_dev);
+ chip->dev = &client->dev;
+ mutex_init(&chip->lock);
+
+ chip->regmap = devm_regmap_init_i2c(client, &isl29028_regmap_config);
+ if (IS_ERR(chip->regmap)) {
+ ret = PTR_ERR(chip->regmap);
+ dev_err(chip->dev, "regmap initialization failed: %d\n", ret);
+ goto exit_iio_free;
+ }
+
+ ret = isl29028_chip_init(chip);
+ if (ret < 0) {
+ dev_err(chip->dev, "chip initialization failed: %d\n", ret);
+ goto exit_iio_free;
+ }
+
+ indio_dev->info = &isl29028_info;
+ indio_dev->channels = isl29028_channels;
+ indio_dev->num_channels = ARRAY_SIZE(isl29028_channels);
+ indio_dev->name = id->name;
+ indio_dev->dev.parent = &client->dev;
+ indio_dev->modes = INDIO_DIRECT_MODE;
+ ret = iio_device_register(indio_dev);
+ if (ret < 0) {
+ dev_err(chip->dev, "iio registration fails with error %d\n",
+ ret);
+ goto exit_iio_free;
+ }
+ return 0;
+
+exit_iio_free:
+ iio_free_device(indio_dev);
+ return ret;
+}
+
+static int __devexit isl29028_remove(struct i2c_client *client)
+{
+ struct iio_dev *indio_dev = i2c_get_clientdata(client);
+
+ iio_device_unregister(indio_dev);
+ iio_free_device(indio_dev);
+ return 0;
+}
+
+static const struct i2c_device_id isl29028_id[] = {
+ {"isl29028", 0},
+ {}
+};
+MODULE_DEVICE_TABLE(i2c, isl29028_id);
+
+static const struct of_device_id isl29028_of_match[] = {
+ { .compatible = "isl,isl29028", },
+ { },
+};
+MODULE_DEVICE_TABLE(of, isl29028_of_match);
+
+static struct i2c_driver isl29028_driver = {
+ .class = I2C_CLASS_HWMON,
+ .driver = {
+ .name = "isl29028",
+ .owner = THIS_MODULE,
+ .of_match_table = isl29028_of_match,
+ },
+ .probe = isl29028_probe,
+ .remove = __devexit_p(isl29028_remove),
+ .id_table = isl29028_id,
+};
+
+module_i2c_driver(isl29028_driver);
+
+MODULE_DESCRIPTION("ISL29028 Ambient Light and Proximity Sensor driver");
+MODULE_LICENSE("GPL v2");
+MODULE_AUTHOR("Laxman Dewangan <ldewangan-DDmLM1+adcrQT0dZR+AlfA@public.gmane.org>");
--
1.7.1.1
^ permalink raw reply related [flat|nested] 20+ messages in thread
* Re: [PATCH V4 1/2] staging: iio: add channel info for sampling frequency
@ 2012-04-12 14:27 ` Jonathan Cameron
0 siblings, 0 replies; 20+ messages in thread
From: Jonathan Cameron @ 2012-04-12 14:27 UTC (permalink / raw)
To: Laxman Dewangan
Cc: gregkh, grant.likely, rob.herring, jbrenner, rklein, max,
linux-iio, devel, linux-kernel, devicetree-discuss
On 4/12/2012 3:01 PM, Laxman Dewangan wrote:
> Adding channel info IIO_CHAN_INFO_SAMP_FREQ to select
> different sampling frequency per channel wise.
>
> Signed-off-by: Laxman Dewangan<ldewangan@nvidia.com>
Acked-by: Jonathan Cameron <jic23@kernel.org>
> ---
> changes from V3:
> - Change the info name to "sampling_frequency"
>
> drivers/staging/iio/iio.h | 5 +++++
> drivers/staging/iio/industrialio-core.c | 1 +
> 2 files changed, 6 insertions(+), 0 deletions(-)
>
> diff --git a/drivers/staging/iio/iio.h b/drivers/staging/iio/iio.h
> index b9cd454..9aa0dd5 100644
> --- a/drivers/staging/iio/iio.h
> +++ b/drivers/staging/iio/iio.h
> @@ -36,6 +36,7 @@ enum iio_chan_info_enum {
> IIO_CHAN_INFO_QUADRATURE_CORRECTION_RAW,
> IIO_CHAN_INFO_AVERAGE_RAW,
> IIO_CHAN_INFO_LOW_PASS_FILTER_3DB_FREQUENCY,
> + IIO_CHAN_INFO_SAMP_FREQ,
> };
>
> #define IIO_CHAN_INFO_SHARED_BIT(type) BIT(type*2)
> @@ -81,6 +82,10 @@ enum iio_chan_info_enum {
> #define IIO_CHAN_INFO_LOW_PASS_FILTER_3DB_FREQUENCY_SEPARATE_BIT \
> IIO_CHAN_INFO_SEPARATE_BIT( \
> IIO_CHAN_INFO_LOW_PASS_FILTER_3DB_FREQUENCY)
> +#define IIO_CHAN_INFO_SAMP_FREQ_SEPARATE_BIT \
> + IIO_CHAN_INFO_SEPARATE_BIT(IIO_CHAN_INFO_SAMP_FREQ)
> +#define IIO_CHAN_INFO_SAMP_FREQ_SHARED_BIT \
> + IIO_CHAN_INFO_SHARED_BIT(IIO_CHAN_INFO_SAMP_FREQ)
>
> enum iio_endian {
> IIO_CPU,
> diff --git a/drivers/staging/iio/industrialio-core.c b/drivers/staging/iio/industrialio-core.c
> index d303bfb..9e42713 100644
> --- a/drivers/staging/iio/industrialio-core.c
> +++ b/drivers/staging/iio/industrialio-core.c
> @@ -90,6 +90,7 @@ static const char * const iio_chan_info_postfix[] = {
> [IIO_CHAN_INFO_AVERAGE_RAW] = "mean_raw",
> [IIO_CHAN_INFO_LOW_PASS_FILTER_3DB_FREQUENCY]
> = "filter_low_pass_3db_frequency",
> + [IIO_CHAN_INFO_SAMP_FREQ] = "sampling_frequency",
> };
>
> const struct iio_chan_spec
^ permalink raw reply [flat|nested] 20+ messages in thread
* Re: [PATCH V4 1/2] staging: iio: add channel info for sampling frequency
@ 2012-04-12 14:27 ` Jonathan Cameron
0 siblings, 0 replies; 20+ messages in thread
From: Jonathan Cameron @ 2012-04-12 14:27 UTC (permalink / raw)
To: Laxman Dewangan
Cc: gregkh-hQyY1W1yCW8ekmWlsbkhG0B+6BGkLq7r,
grant.likely-s3s/WqlpOiPyB63q8FvJNQ,
rob.herring-bsGFqQB8/DxBDgjK7y7TUQ,
jbrenner-yYKgigLBUwlBDgjK7y7TUQ, rklein-DDmLM1+adcrQT0dZR+AlfA,
max-U9r9yeDMy7A, linux-iio-u79uwXL29TY76Z2rM5mHXA,
devel-gWbeCf7V1WCQmaza687I9mD2FQJk+8+b,
linux-kernel-u79uwXL29TY76Z2rM5mHXA,
devicetree-discuss-uLR06cmDAlY/bJ5BZ2RsiQ
On 4/12/2012 3:01 PM, Laxman Dewangan wrote:
> Adding channel info IIO_CHAN_INFO_SAMP_FREQ to select
> different sampling frequency per channel wise.
>
> Signed-off-by: Laxman Dewangan<ldewangan-DDmLM1+adcrQT0dZR+AlfA@public.gmane.org>
Acked-by: Jonathan Cameron <jic23-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org>
> ---
> changes from V3:
> - Change the info name to "sampling_frequency"
>
> drivers/staging/iio/iio.h | 5 +++++
> drivers/staging/iio/industrialio-core.c | 1 +
> 2 files changed, 6 insertions(+), 0 deletions(-)
>
> diff --git a/drivers/staging/iio/iio.h b/drivers/staging/iio/iio.h
> index b9cd454..9aa0dd5 100644
> --- a/drivers/staging/iio/iio.h
> +++ b/drivers/staging/iio/iio.h
> @@ -36,6 +36,7 @@ enum iio_chan_info_enum {
> IIO_CHAN_INFO_QUADRATURE_CORRECTION_RAW,
> IIO_CHAN_INFO_AVERAGE_RAW,
> IIO_CHAN_INFO_LOW_PASS_FILTER_3DB_FREQUENCY,
> + IIO_CHAN_INFO_SAMP_FREQ,
> };
>
> #define IIO_CHAN_INFO_SHARED_BIT(type) BIT(type*2)
> @@ -81,6 +82,10 @@ enum iio_chan_info_enum {
> #define IIO_CHAN_INFO_LOW_PASS_FILTER_3DB_FREQUENCY_SEPARATE_BIT \
> IIO_CHAN_INFO_SEPARATE_BIT( \
> IIO_CHAN_INFO_LOW_PASS_FILTER_3DB_FREQUENCY)
> +#define IIO_CHAN_INFO_SAMP_FREQ_SEPARATE_BIT \
> + IIO_CHAN_INFO_SEPARATE_BIT(IIO_CHAN_INFO_SAMP_FREQ)
> +#define IIO_CHAN_INFO_SAMP_FREQ_SHARED_BIT \
> + IIO_CHAN_INFO_SHARED_BIT(IIO_CHAN_INFO_SAMP_FREQ)
>
> enum iio_endian {
> IIO_CPU,
> diff --git a/drivers/staging/iio/industrialio-core.c b/drivers/staging/iio/industrialio-core.c
> index d303bfb..9e42713 100644
> --- a/drivers/staging/iio/industrialio-core.c
> +++ b/drivers/staging/iio/industrialio-core.c
> @@ -90,6 +90,7 @@ static const char * const iio_chan_info_postfix[] = {
> [IIO_CHAN_INFO_AVERAGE_RAW] = "mean_raw",
> [IIO_CHAN_INFO_LOW_PASS_FILTER_3DB_FREQUENCY]
> = "filter_low_pass_3db_frequency",
> + [IIO_CHAN_INFO_SAMP_FREQ] = "sampling_frequency",
> };
>
> const struct iio_chan_spec
^ permalink raw reply [flat|nested] 20+ messages in thread
* Re: [PATCH V4 2/2] staging: iio: add driver for isl29028
@ 2012-04-12 14:34 ` Jonathan Cameron
0 siblings, 0 replies; 20+ messages in thread
From: Jonathan Cameron @ 2012-04-12 14:34 UTC (permalink / raw)
To: Laxman Dewangan
Cc: gregkh, grant.likely, rob.herring, jbrenner, rklein, max,
linux-iio, devel, linux-kernel, devicetree-discuss
On 4/12/2012 3:01 PM, Laxman Dewangan wrote:
> Intersil's ISL29028 is concurrent Ambient Light and
> Proximity Sensor device.
> Add driver to access the light and IR intensity and
> proximity value via iio interface.
Very nearly there. The available attributes need to match naming
of what they are providing values for. (we need a better way of handling
these but that's a job for another day).
Otherwise, all good.
>
> Signed-off-by: Laxman Dewangan<ldewangan@nvidia.com>
> ---
> Changes from V1:
> - Taken care of cleanups comments.
>
> Changes from V2:
> - use the channel info for sampling frequency selection rather than
> exposing separate sysfs from driver.
>
> Changes from V3:
> - Remove sysfs range and add scale through channel info.
>
> drivers/staging/iio/light/Kconfig | 10 +
> drivers/staging/iio/light/Makefile | 1 +
> drivers/staging/iio/light/isl29028.c | 563 ++++++++++++++++++++++++++++++++++
> 3 files changed, 574 insertions(+), 0 deletions(-)
> create mode 100644 drivers/staging/iio/light/isl29028.c
>
> diff --git a/drivers/staging/iio/light/Kconfig b/drivers/staging/iio/light/Kconfig
> index e7e9159..53b49f7 100644
> --- a/drivers/staging/iio/light/Kconfig
> +++ b/drivers/staging/iio/light/Kconfig
> @@ -14,6 +14,16 @@ config SENSORS_ISL29018
> in lux, proximity infrared sensing and normal infrared sensing.
> Data from sensor is accessible via sysfs.
>
> +config SENSORS_ISL29028
> + tristate "Intersil ISL29028 Concurrent Light and Proximity Sensor"
> + depends on I2C
> + select REGMAP_I2C
> + help
> + Provides driver for the Intersil's ISL29028 device.
> + This driver supports the sysfs interface to get the ALS, IR intensity,
> + Proximity value via iio. The ISL29028 provides the concurrent sensing
> + of ambient light and proximity.
> +
> config SENSORS_TSL2563
> tristate "TAOS TSL2560, TSL2561, TSL2562 and TSL2563 ambient light sensors"
> depends on I2C
> diff --git a/drivers/staging/iio/light/Makefile b/drivers/staging/iio/light/Makefile
> index 3011fbf..535d313 100644
> --- a/drivers/staging/iio/light/Makefile
> +++ b/drivers/staging/iio/light/Makefile
> @@ -4,4 +4,5 @@
>
> obj-$(CONFIG_SENSORS_TSL2563) += tsl2563.o
> obj-$(CONFIG_SENSORS_ISL29018) += isl29018.o
> +obj-$(CONFIG_SENSORS_ISL29028) += isl29028.o
> obj-$(CONFIG_TSL2583) += tsl2583.o
> diff --git a/drivers/staging/iio/light/isl29028.c b/drivers/staging/iio/light/isl29028.c
> new file mode 100644
> index 0000000..faa64f7
> --- /dev/null
> +++ b/drivers/staging/iio/light/isl29028.c
> @@ -0,0 +1,563 @@
> +/*
> + * IIO driver for the light sensor ISL29028.
> + * ISL29028 is Concurrent Ambient Light and Proximity Sensor
> + *
> + * Copyright (c) 2012, NVIDIA CORPORATION. All rights reserved.
> + *
> + * This program is free software; you can redistribute it and/or modify it
> + * under the terms and conditions of the GNU General Public License,
> + * version 2, as published by the Free Software Foundation.
> + *
> + * This program is distributed in the hope it will be useful, but WITHOUT
> + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
> + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
> + * more details.
> + *
> + * You should have received a copy of the GNU General Public License
> + * along with this program. If not, see<http://www.gnu.org/licenses/>.
> + */
> +
> +#include<linux/module.h>
> +#include<linux/i2c.h>
> +#include<linux/err.h>
> +#include<linux/mutex.h>
> +#include<linux/delay.h>
> +#include<linux/slab.h>
> +#include<linux/regmap.h>
> +#include "../iio.h"
> +#include "../sysfs.h"
> +
> +#define CONVERSION_TIME_MS 100
> +
> +#define ISL29028_REG_CONFIGURE 0x01
> +
> +#define CONFIGURE_ALS_IR_MODE_ALS 0
> +#define CONFIGURE_ALS_IR_MODE_IR BIT(0)
> +#define CONFIGURE_ALS_IR_MODE_MASK BIT(0)
> +
> +#define CONFIGURE_ALS_RANGE_LOW_LUX 0
> +#define CONFIGURE_ALS_RANGE_HIGH_LUX BIT(1)
> +#define CONFIGURE_ALS_RANGE_MASK BIT(1)
> +
> +#define CONFIGURE_ALS_DIS 0
> +#define CONFIGURE_ALS_EN BIT(2)
> +#define CONFIGURE_ALS_EN_MASK BIT(2)
> +
> +#define CONFIGURE_PROX_DRIVE BIT(3)
> +
> +#define CONFIGURE_PROX_SLP_SH 4
> +#define CONFIGURE_PROX_SLP_MASK (7<< CONFIGURE_PROX_SLP_SH)
> +
> +#define CONFIGURE_PROX_EN BIT(7)
> +#define CONFIGURE_PROX_EN_MASK BIT(7)
> +
> +#define ISL29028_REG_INTERRUPT 0x02
> +
> +#define ISL29028_REG_PROX_DATA 0x08
> +#define ISL29028_REG_ALSIR_L 0x09
> +#define ISL29028_REG_ALSIR_U 0x0A
> +
> +#define ISL29028_REG_TEST1_MODE 0x0E
> +#define ISL29028_REG_TEST2_MODE 0x0F
> +
> +#define ISL29028_MAX_REGS (ISL29028_REG_TEST2_MODE + 1)
> +
> +enum als_ir_mode {
> + MODE_NONE = 0,
> + MODE_ALS,
> + MODE_IR
> +};
> +
> +struct isl29028_chip {
> + struct device *dev;
> + struct mutex lock;
> + struct regmap *regmap;
> +
> + unsigned int prox_sampling;
> + bool enable_prox;
> +
> + int lux_scale;
> + int als_ir_mode;
> +};
> +
> +static int isl29028_set_proxim_sampling(struct isl29028_chip *chip,
> + unsigned int sampling)
> +{
> + static unsigned int prox_period[] = {800, 400, 200, 100, 75, 50, 12, 0};
> + int sel;
> + unsigned int period = DIV_ROUND_UP(1000, sampling);
> +
> + for (sel = 0; sel< ARRAY_SIZE(prox_period); ++sel) {
> + if (period>= prox_period[sel])
> + break;
> + }
> + return regmap_update_bits(chip->regmap, ISL29028_REG_CONFIGURE,
> + CONFIGURE_PROX_SLP_MASK, sel<< CONFIGURE_PROX_SLP_SH);
> +}
> +
> +static int isl29028_enable_proximity(struct isl29028_chip *chip, bool enable)
> +{
> + int ret;
> + int val = 0;
> +
> + if (enable)
> + val = CONFIGURE_PROX_EN;
> + ret = regmap_update_bits(chip->regmap, ISL29028_REG_CONFIGURE,
> + CONFIGURE_PROX_EN_MASK, val);
> + if (ret< 0)
> + return ret;
> +
> + /* Wait for conversion to be complete for first sample */
> + mdelay(DIV_ROUND_UP(1000, chip->prox_sampling));
> + return 0;
> +}
> +
> +static int isl29028_set_als_scale(struct isl29028_chip *chip, int lux_scale)
> +{
> + int val = (lux_scale == 2000) ? CONFIGURE_ALS_RANGE_HIGH_LUX :
> + CONFIGURE_ALS_RANGE_LOW_LUX;
> +
> + return regmap_update_bits(chip->regmap, ISL29028_REG_CONFIGURE,
> + CONFIGURE_ALS_RANGE_MASK, val);
> +}
> +
> +static int isl29028_set_als_ir_mode(struct isl29028_chip *chip,
> + enum als_ir_mode mode)
> +{
> + int ret = 0;
> +
> + switch (mode) {
> + case MODE_ALS:
> + ret = regmap_update_bits(chip->regmap, ISL29028_REG_CONFIGURE,
> + CONFIGURE_ALS_IR_MODE_MASK, CONFIGURE_ALS_IR_MODE_ALS);
> + if (ret< 0)
> + return ret;
> +
> + ret = regmap_update_bits(chip->regmap, ISL29028_REG_CONFIGURE,
> + CONFIGURE_ALS_RANGE_MASK, CONFIGURE_ALS_RANGE_HIGH_LUX);
> + break;
> +
> + case MODE_IR:
> + ret = regmap_update_bits(chip->regmap, ISL29028_REG_CONFIGURE,
> + CONFIGURE_ALS_IR_MODE_MASK, CONFIGURE_ALS_IR_MODE_IR);
> + break;
> +
> + case MODE_NONE:
> + return regmap_update_bits(chip->regmap, ISL29028_REG_CONFIGURE,
> + CONFIGURE_ALS_EN_MASK, CONFIGURE_ALS_DIS);
> + }
> +
> + if (ret< 0)
> + return ret;
> +
> + /* Enable the ALS/IR */
> + ret = regmap_update_bits(chip->regmap, ISL29028_REG_CONFIGURE,
> + CONFIGURE_ALS_EN_MASK, CONFIGURE_ALS_EN);
> + if (ret< 0)
> + return ret;
> +
> + /* Need to wait for conversion time if ALS/IR mode enabled */
> + mdelay(CONVERSION_TIME_MS);
> + return 0;
> +}
> +
> +static int isl29028_read_als_ir(struct isl29028_chip *chip, int *als_ir)
> +{
> + unsigned int lsb;
> + unsigned int msb;
> + int ret;
> +
> + ret = regmap_read(chip->regmap, ISL29028_REG_ALSIR_L,&lsb);
> + if (ret< 0) {
> + dev_err(chip->dev,
> + "Error in reading register ALSIR_L err %d\n", ret);
> + return ret;
> + }
> +
> + ret = regmap_read(chip->regmap, ISL29028_REG_ALSIR_U,&msb);
> + if (ret< 0) {
> + dev_err(chip->dev,
> + "Error in reading register ALSIR_U err %d\n", ret);
> + return ret;
> + }
> +
> + *als_ir = ((msb& 0xF)<< 8) | (lsb& 0xFF);
> + return 0;
> +}
> +
> +static int isl29028_read_proxim(struct isl29028_chip *chip, int *prox)
> +{
> + unsigned int data;
> + int ret;
> +
> + ret = regmap_read(chip->regmap, ISL29028_REG_PROX_DATA,&data);
> + if (ret< 0) {
> + dev_err(chip->dev, "Error in reading register %d, error %d\n",
> + ISL29028_REG_PROX_DATA, ret);
> + return ret;
> + }
> + *prox = data;
> + return 0;
> +}
> +
> +static int isl29028_proxim_get(struct isl29028_chip *chip, int *prox_data)
> +{
> + int ret;
> +
> + if (!chip->enable_prox) {
> + ret = isl29028_enable_proximity(chip, true);
> + if (ret< 0)
> + return ret;
> + chip->enable_prox = true;
> + }
> + return isl29028_read_proxim(chip, prox_data);
> +}
> +
> +static int isl29028_als_get(struct isl29028_chip *chip, int *als_data)
> +{
> + int ret;
> + int als_ir_data;
> +
> + if (chip->als_ir_mode != MODE_ALS) {
> + ret = isl29028_set_als_ir_mode(chip, MODE_ALS);
> + if (ret< 0) {
> + dev_err(chip->dev,
> + "Error in enabling ALS mode err %d\n", ret);
> + return ret;
> + }
> + chip->als_ir_mode = MODE_ALS;
> + }
> +
> + ret = isl29028_read_als_ir(chip,&als_ir_data);
> + if (ret< 0)
> + return ret;
> +
> + /*
> + * convert als data count to lux.
> + * if lux_scale = 125, lux = count * 0.031
> + * if lux_scale = 2000, lux = count * 0.49
> + */
> + if (chip->lux_scale == 125)
> + als_ir_data = (als_ir_data * 31) / 1000;
> + else
> + als_ir_data = (als_ir_data * 49) / 100;
> +
> + *als_data = als_ir_data;
> + return 0;
> +}
> +
> +static int isl29028_ir_get(struct isl29028_chip *chip, int *ir_data)
> +{
> + int ret;
> +
> + if (chip->als_ir_mode != MODE_IR) {
> + ret = isl29028_set_als_ir_mode(chip, MODE_IR);
> + if (ret< 0) {
> + dev_err(chip->dev,
> + "Error in enabling IR mode err %d\n", ret);
> + return ret;
> + }
> + chip->als_ir_mode = MODE_IR;
> + }
> + return isl29028_read_als_ir(chip, ir_data);
> +}
> +
> +/* Channel IO */
> +static int isl29028_write_raw(struct iio_dev *indio_dev,
> + struct iio_chan_spec const *chan, int val, int val2, long mask)
> +{
> + struct isl29028_chip *chip = iio_priv(indio_dev);
> + int ret = -EINVAL;
> +
> + mutex_lock(&chip->lock);
> + switch (chan->type) {
> + case IIO_PROXIMITY:
> + if (mask != IIO_CHAN_INFO_SAMP_FREQ_SEPARATE_BIT) {
> + dev_err(chip->dev,
> + "proximity: mask value 0x%08lx not supported\n",
> + mask);
> + break;
> + }
> + if (val< 1 || val> 100) {
> + dev_err(chip->dev,
> + "Samp_freq %d is not in range[1:100]\n", val);
> + break;
> + }
> + ret = isl29028_set_proxim_sampling(chip, val);
> + if (ret< 0) {
> + dev_err(chip->dev,
> + "Setting proximity samp_freq fail, err %d\n",
> + ret);
> + break;
> + }
> + chip->prox_sampling = val;
> + break;
> +
> + case IIO_LIGHT:
> + if (mask != IIO_CHAN_INFO_SCALE_SEPARATE_BIT) {
> + dev_err(chip->dev,
> + "light: mask value 0x%08lx not supported\n",
> + mask);
> + break;
> + }
> + if ((val != 125)&& (val != 2000)) {
> + dev_err(chip->dev,
> + "lux scale %d is invalid [125, 2000]\n", val);
> + break;
> + }
> + ret = isl29028_set_als_scale(chip, val);
> + if (ret< 0) {
> + dev_err(chip->dev,
> + "Setting lux scale fail with error %d\n", ret);
> + break;
> + }
> + chip->lux_scale = val;
> + break;
> +
> + default:
> + dev_err(chip->dev, "Unsupported channel type\n");
> + break;
> + }
> + mutex_unlock(&chip->lock);
> + return ret;
> +}
> +
> +static int isl29028_read_raw(struct iio_dev *indio_dev,
> + struct iio_chan_spec const *chan, int *val, int *val2, long mask)
> +{
> + struct isl29028_chip *chip = iio_priv(indio_dev);
> + int ret = -EINVAL;
> +
> + mutex_lock(&chip->lock);
> + switch (mask) {
> + case 0:
> + switch (chan->type) {
> + case IIO_LIGHT:
> + ret = isl29028_als_get(chip, val);
> + break;
> + case IIO_INTENSITY:
> + ret = isl29028_ir_get(chip, val);
> + break;
> + case IIO_PROXIMITY:
> + ret = isl29028_proxim_get(chip, val);
> + break;
> + default:
> + break;
> + }
> + if (ret< 0)
> + break;
> + ret = IIO_VAL_INT;
> + break;
> +
> + case IIO_CHAN_INFO_SAMP_FREQ_SEPARATE_BIT:
> + if (chan->type != IIO_PROXIMITY)
> + break;
> + *val = chip->prox_sampling;
> + ret = IIO_VAL_INT;
> + break;
> +
> + case IIO_CHAN_INFO_SCALE_SEPARATE_BIT:
> + if (chan->type != IIO_LIGHT)
> + break;
> + *val = chip->lux_scale;
> + ret = IIO_VAL_INT;
> + break;
> +
> + default:
> + dev_err(chip->dev, "mask value 0x%08lx not supported\n", mask);
> + break;
> + }
> + mutex_unlock(&chip->lock);
> + return ret;
> +}
> +
> +static IIO_CONST_ATTR(proximity_sampling_frequency_available,
> + "1, 3, 5, 10, 13, 20, 83, 100");
> +static IIO_CONST_ATTR(illuminance_scale_available, "125, 2000");
> +
> +#define ISL29028_DEV_ATTR(name) (&iio_dev_attr_##name.dev_attr.attr)
> +#define ISL29028_CONST_ATTR(name) (&iio_const_attr_##name.dev_attr.attr)
> +static struct attribute *isl29028_attributes[] = {
> + ISL29028_CONST_ATTR(proximity_sampling_frequency_available),
tiny disconnect now that you have in_proximity0_sampling frequency, this
should be in_proximity0_sampling_frequency_available
> + ISL29028_CONST_ATTR(illuminance_scale_available),
snap here (sorry, missed that last time).
in_illuminance0_scale_available
> + NULL,
> +};
> +
> +static const struct attribute_group isl29108_group = {
> + .attrs = isl29028_attributes,
> +};
> +
> +static const struct iio_chan_spec isl29028_channels[] = {
> + {
> + .type = IIO_LIGHT,
> + .processed_val = 1,
> + .info_mask = IIO_CHAN_INFO_SCALE_SEPARATE_BIT,
> + }, {
> + .type = IIO_INTENSITY,
> + }, {
> + .type = IIO_PROXIMITY,
> + .info_mask = IIO_CHAN_INFO_SAMP_FREQ_SEPARATE_BIT,
> + }
> +};
> +
> +static const struct iio_info isl29028_info = {
> + .attrs =&isl29108_group,
> + .driver_module = THIS_MODULE,
> + .read_raw =&isl29028_read_raw,
> + .write_raw =&isl29028_write_raw,
> +};
> +
> +static int isl29028_chip_init(struct isl29028_chip *chip)
> +{
> + int ret;
> +
> + chip->enable_prox = false;
> + chip->prox_sampling = 20;
> + chip->lux_scale = 2000;
> + chip->als_ir_mode = MODE_NONE;
> +
> + ret = regmap_write(chip->regmap, ISL29028_REG_TEST1_MODE, 0x0);
> + if (ret< 0) {
> + dev_err(chip->dev, "%s(): write to reg %d failed, err = %d\n",
> + __func__, ISL29028_REG_TEST1_MODE, ret);
> + return ret;
> + }
> + ret = regmap_write(chip->regmap, ISL29028_REG_TEST2_MODE, 0x0);
> + if (ret< 0) {
> + dev_err(chip->dev, "%s(): write to reg %d failed, err = %d\n",
> + __func__, ISL29028_REG_TEST2_MODE, ret);
> + return ret;
> + }
> +
> + ret = regmap_write(chip->regmap, ISL29028_REG_CONFIGURE, 0x0);
> + if (ret< 0) {
> + dev_err(chip->dev, "%s(): write to reg %d failed, err = %d\n",
> + __func__, ISL29028_REG_CONFIGURE, ret);
> + return ret;
> + }
> +
> + ret = isl29028_set_proxim_sampling(chip, chip->prox_sampling);
> + if (ret< 0) {
> + dev_err(chip->dev, "%s(): setting the proximity, err = %d\n",
> + __func__, ret);
> + return ret;
> + }
> +
> + ret = isl29028_set_als_scale(chip, chip->lux_scale);
> + if (ret< 0)
> + dev_err(chip->dev, "%s(): setting als scale failed, err = %d\n",
> + __func__, ret);
> + return ret;
> +}
> +
> +static bool is_volatile_reg(struct device *dev, unsigned int reg)
> +{
> + switch (reg) {
> + case ISL29028_REG_INTERRUPT:
> + case ISL29028_REG_PROX_DATA:
> + case ISL29028_REG_ALSIR_L:
> + case ISL29028_REG_ALSIR_U:
> + return true;
> + default:
> + return false;
> + }
> +}
> +
> +static const struct regmap_config isl29028_regmap_config = {
> + .reg_bits = 8,
> + .val_bits = 8,
> + .volatile_reg = is_volatile_reg,
> + .max_register = ISL29028_MAX_REGS - 1,
> + .num_reg_defaults_raw = ISL29028_MAX_REGS,
> + .cache_type = REGCACHE_RBTREE,
> +};
> +
> +static int __devinit isl29028_probe(struct i2c_client *client,
> + const struct i2c_device_id *id)
> +{
> + struct isl29028_chip *chip;
> + struct iio_dev *indio_dev;
> + int ret;
> +
> + indio_dev = iio_allocate_device(sizeof(*chip));
> + if (!indio_dev) {
> + dev_err(&client->dev, "iio allocation fails\n");
> + return -ENOMEM;
> + }
> +
> + chip = iio_priv(indio_dev);
> +
> + i2c_set_clientdata(client, indio_dev);
> + chip->dev =&client->dev;
> + mutex_init(&chip->lock);
> +
> + chip->regmap = devm_regmap_init_i2c(client,&isl29028_regmap_config);
> + if (IS_ERR(chip->regmap)) {
> + ret = PTR_ERR(chip->regmap);
> + dev_err(chip->dev, "regmap initialization failed: %d\n", ret);
> + goto exit_iio_free;
> + }
> +
> + ret = isl29028_chip_init(chip);
> + if (ret< 0) {
> + dev_err(chip->dev, "chip initialization failed: %d\n", ret);
> + goto exit_iio_free;
> + }
> +
> + indio_dev->info =&isl29028_info;
> + indio_dev->channels = isl29028_channels;
> + indio_dev->num_channels = ARRAY_SIZE(isl29028_channels);
> + indio_dev->name = id->name;
> + indio_dev->dev.parent =&client->dev;
> + indio_dev->modes = INDIO_DIRECT_MODE;
> + ret = iio_device_register(indio_dev);
> + if (ret< 0) {
> + dev_err(chip->dev, "iio registration fails with error %d\n",
> + ret);
> + goto exit_iio_free;
> + }
> + return 0;
> +
> +exit_iio_free:
> + iio_free_device(indio_dev);
> + return ret;
> +}
> +
> +static int __devexit isl29028_remove(struct i2c_client *client)
> +{
> + struct iio_dev *indio_dev = i2c_get_clientdata(client);
> +
> + iio_device_unregister(indio_dev);
> + iio_free_device(indio_dev);
> + return 0;
> +}
> +
> +static const struct i2c_device_id isl29028_id[] = {
> + {"isl29028", 0},
> + {}
> +};
> +MODULE_DEVICE_TABLE(i2c, isl29028_id);
> +
> +static const struct of_device_id isl29028_of_match[] = {
> + { .compatible = "isl,isl29028", },
> + { },
> +};
> +MODULE_DEVICE_TABLE(of, isl29028_of_match);
> +
> +static struct i2c_driver isl29028_driver = {
> + .class = I2C_CLASS_HWMON,
> + .driver = {
> + .name = "isl29028",
> + .owner = THIS_MODULE,
> + .of_match_table = isl29028_of_match,
> + },
> + .probe = isl29028_probe,
> + .remove = __devexit_p(isl29028_remove),
> + .id_table = isl29028_id,
> +};
> +
> +module_i2c_driver(isl29028_driver);
> +
> +MODULE_DESCRIPTION("ISL29028 Ambient Light and Proximity Sensor driver");
> +MODULE_LICENSE("GPL v2");
> +MODULE_AUTHOR("Laxman Dewangan<ldewangan@nvidia.com>");
^ permalink raw reply [flat|nested] 20+ messages in thread
* Re: [PATCH V4 2/2] staging: iio: add driver for isl29028
@ 2012-04-12 14:34 ` Jonathan Cameron
0 siblings, 0 replies; 20+ messages in thread
From: Jonathan Cameron @ 2012-04-12 14:34 UTC (permalink / raw)
To: Laxman Dewangan
Cc: gregkh-hQyY1W1yCW8ekmWlsbkhG0B+6BGkLq7r,
grant.likely-s3s/WqlpOiPyB63q8FvJNQ,
rob.herring-bsGFqQB8/DxBDgjK7y7TUQ,
jbrenner-yYKgigLBUwlBDgjK7y7TUQ, rklein-DDmLM1+adcrQT0dZR+AlfA,
max-U9r9yeDMy7A, linux-iio-u79uwXL29TY76Z2rM5mHXA,
devel-gWbeCf7V1WCQmaza687I9mD2FQJk+8+b,
linux-kernel-u79uwXL29TY76Z2rM5mHXA,
devicetree-discuss-uLR06cmDAlY/bJ5BZ2RsiQ
On 4/12/2012 3:01 PM, Laxman Dewangan wrote:
> Intersil's ISL29028 is concurrent Ambient Light and
> Proximity Sensor device.
> Add driver to access the light and IR intensity and
> proximity value via iio interface.
Very nearly there. The available attributes need to match naming
of what they are providing values for. (we need a better way of handling
these but that's a job for another day).
Otherwise, all good.
>
> Signed-off-by: Laxman Dewangan<ldewangan-DDmLM1+adcrQT0dZR+AlfA@public.gmane.org>
> ---
> Changes from V1:
> - Taken care of cleanups comments.
>
> Changes from V2:
> - use the channel info for sampling frequency selection rather than
> exposing separate sysfs from driver.
>
> Changes from V3:
> - Remove sysfs range and add scale through channel info.
>
> drivers/staging/iio/light/Kconfig | 10 +
> drivers/staging/iio/light/Makefile | 1 +
> drivers/staging/iio/light/isl29028.c | 563 ++++++++++++++++++++++++++++++++++
> 3 files changed, 574 insertions(+), 0 deletions(-)
> create mode 100644 drivers/staging/iio/light/isl29028.c
>
> diff --git a/drivers/staging/iio/light/Kconfig b/drivers/staging/iio/light/Kconfig
> index e7e9159..53b49f7 100644
> --- a/drivers/staging/iio/light/Kconfig
> +++ b/drivers/staging/iio/light/Kconfig
> @@ -14,6 +14,16 @@ config SENSORS_ISL29018
> in lux, proximity infrared sensing and normal infrared sensing.
> Data from sensor is accessible via sysfs.
>
> +config SENSORS_ISL29028
> + tristate "Intersil ISL29028 Concurrent Light and Proximity Sensor"
> + depends on I2C
> + select REGMAP_I2C
> + help
> + Provides driver for the Intersil's ISL29028 device.
> + This driver supports the sysfs interface to get the ALS, IR intensity,
> + Proximity value via iio. The ISL29028 provides the concurrent sensing
> + of ambient light and proximity.
> +
> config SENSORS_TSL2563
> tristate "TAOS TSL2560, TSL2561, TSL2562 and TSL2563 ambient light sensors"
> depends on I2C
> diff --git a/drivers/staging/iio/light/Makefile b/drivers/staging/iio/light/Makefile
> index 3011fbf..535d313 100644
> --- a/drivers/staging/iio/light/Makefile
> +++ b/drivers/staging/iio/light/Makefile
> @@ -4,4 +4,5 @@
>
> obj-$(CONFIG_SENSORS_TSL2563) += tsl2563.o
> obj-$(CONFIG_SENSORS_ISL29018) += isl29018.o
> +obj-$(CONFIG_SENSORS_ISL29028) += isl29028.o
> obj-$(CONFIG_TSL2583) += tsl2583.o
> diff --git a/drivers/staging/iio/light/isl29028.c b/drivers/staging/iio/light/isl29028.c
> new file mode 100644
> index 0000000..faa64f7
> --- /dev/null
> +++ b/drivers/staging/iio/light/isl29028.c
> @@ -0,0 +1,563 @@
> +/*
> + * IIO driver for the light sensor ISL29028.
> + * ISL29028 is Concurrent Ambient Light and Proximity Sensor
> + *
> + * Copyright (c) 2012, NVIDIA CORPORATION. All rights reserved.
> + *
> + * This program is free software; you can redistribute it and/or modify it
> + * under the terms and conditions of the GNU General Public License,
> + * version 2, as published by the Free Software Foundation.
> + *
> + * This program is distributed in the hope it will be useful, but WITHOUT
> + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
> + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
> + * more details.
> + *
> + * You should have received a copy of the GNU General Public License
> + * along with this program. If not, see<http://www.gnu.org/licenses/>.
> + */
> +
> +#include<linux/module.h>
> +#include<linux/i2c.h>
> +#include<linux/err.h>
> +#include<linux/mutex.h>
> +#include<linux/delay.h>
> +#include<linux/slab.h>
> +#include<linux/regmap.h>
> +#include "../iio.h"
> +#include "../sysfs.h"
> +
> +#define CONVERSION_TIME_MS 100
> +
> +#define ISL29028_REG_CONFIGURE 0x01
> +
> +#define CONFIGURE_ALS_IR_MODE_ALS 0
> +#define CONFIGURE_ALS_IR_MODE_IR BIT(0)
> +#define CONFIGURE_ALS_IR_MODE_MASK BIT(0)
> +
> +#define CONFIGURE_ALS_RANGE_LOW_LUX 0
> +#define CONFIGURE_ALS_RANGE_HIGH_LUX BIT(1)
> +#define CONFIGURE_ALS_RANGE_MASK BIT(1)
> +
> +#define CONFIGURE_ALS_DIS 0
> +#define CONFIGURE_ALS_EN BIT(2)
> +#define CONFIGURE_ALS_EN_MASK BIT(2)
> +
> +#define CONFIGURE_PROX_DRIVE BIT(3)
> +
> +#define CONFIGURE_PROX_SLP_SH 4
> +#define CONFIGURE_PROX_SLP_MASK (7<< CONFIGURE_PROX_SLP_SH)
> +
> +#define CONFIGURE_PROX_EN BIT(7)
> +#define CONFIGURE_PROX_EN_MASK BIT(7)
> +
> +#define ISL29028_REG_INTERRUPT 0x02
> +
> +#define ISL29028_REG_PROX_DATA 0x08
> +#define ISL29028_REG_ALSIR_L 0x09
> +#define ISL29028_REG_ALSIR_U 0x0A
> +
> +#define ISL29028_REG_TEST1_MODE 0x0E
> +#define ISL29028_REG_TEST2_MODE 0x0F
> +
> +#define ISL29028_MAX_REGS (ISL29028_REG_TEST2_MODE + 1)
> +
> +enum als_ir_mode {
> + MODE_NONE = 0,
> + MODE_ALS,
> + MODE_IR
> +};
> +
> +struct isl29028_chip {
> + struct device *dev;
> + struct mutex lock;
> + struct regmap *regmap;
> +
> + unsigned int prox_sampling;
> + bool enable_prox;
> +
> + int lux_scale;
> + int als_ir_mode;
> +};
> +
> +static int isl29028_set_proxim_sampling(struct isl29028_chip *chip,
> + unsigned int sampling)
> +{
> + static unsigned int prox_period[] = {800, 400, 200, 100, 75, 50, 12, 0};
> + int sel;
> + unsigned int period = DIV_ROUND_UP(1000, sampling);
> +
> + for (sel = 0; sel< ARRAY_SIZE(prox_period); ++sel) {
> + if (period>= prox_period[sel])
> + break;
> + }
> + return regmap_update_bits(chip->regmap, ISL29028_REG_CONFIGURE,
> + CONFIGURE_PROX_SLP_MASK, sel<< CONFIGURE_PROX_SLP_SH);
> +}
> +
> +static int isl29028_enable_proximity(struct isl29028_chip *chip, bool enable)
> +{
> + int ret;
> + int val = 0;
> +
> + if (enable)
> + val = CONFIGURE_PROX_EN;
> + ret = regmap_update_bits(chip->regmap, ISL29028_REG_CONFIGURE,
> + CONFIGURE_PROX_EN_MASK, val);
> + if (ret< 0)
> + return ret;
> +
> + /* Wait for conversion to be complete for first sample */
> + mdelay(DIV_ROUND_UP(1000, chip->prox_sampling));
> + return 0;
> +}
> +
> +static int isl29028_set_als_scale(struct isl29028_chip *chip, int lux_scale)
> +{
> + int val = (lux_scale == 2000) ? CONFIGURE_ALS_RANGE_HIGH_LUX :
> + CONFIGURE_ALS_RANGE_LOW_LUX;
> +
> + return regmap_update_bits(chip->regmap, ISL29028_REG_CONFIGURE,
> + CONFIGURE_ALS_RANGE_MASK, val);
> +}
> +
> +static int isl29028_set_als_ir_mode(struct isl29028_chip *chip,
> + enum als_ir_mode mode)
> +{
> + int ret = 0;
> +
> + switch (mode) {
> + case MODE_ALS:
> + ret = regmap_update_bits(chip->regmap, ISL29028_REG_CONFIGURE,
> + CONFIGURE_ALS_IR_MODE_MASK, CONFIGURE_ALS_IR_MODE_ALS);
> + if (ret< 0)
> + return ret;
> +
> + ret = regmap_update_bits(chip->regmap, ISL29028_REG_CONFIGURE,
> + CONFIGURE_ALS_RANGE_MASK, CONFIGURE_ALS_RANGE_HIGH_LUX);
> + break;
> +
> + case MODE_IR:
> + ret = regmap_update_bits(chip->regmap, ISL29028_REG_CONFIGURE,
> + CONFIGURE_ALS_IR_MODE_MASK, CONFIGURE_ALS_IR_MODE_IR);
> + break;
> +
> + case MODE_NONE:
> + return regmap_update_bits(chip->regmap, ISL29028_REG_CONFIGURE,
> + CONFIGURE_ALS_EN_MASK, CONFIGURE_ALS_DIS);
> + }
> +
> + if (ret< 0)
> + return ret;
> +
> + /* Enable the ALS/IR */
> + ret = regmap_update_bits(chip->regmap, ISL29028_REG_CONFIGURE,
> + CONFIGURE_ALS_EN_MASK, CONFIGURE_ALS_EN);
> + if (ret< 0)
> + return ret;
> +
> + /* Need to wait for conversion time if ALS/IR mode enabled */
> + mdelay(CONVERSION_TIME_MS);
> + return 0;
> +}
> +
> +static int isl29028_read_als_ir(struct isl29028_chip *chip, int *als_ir)
> +{
> + unsigned int lsb;
> + unsigned int msb;
> + int ret;
> +
> + ret = regmap_read(chip->regmap, ISL29028_REG_ALSIR_L,&lsb);
> + if (ret< 0) {
> + dev_err(chip->dev,
> + "Error in reading register ALSIR_L err %d\n", ret);
> + return ret;
> + }
> +
> + ret = regmap_read(chip->regmap, ISL29028_REG_ALSIR_U,&msb);
> + if (ret< 0) {
> + dev_err(chip->dev,
> + "Error in reading register ALSIR_U err %d\n", ret);
> + return ret;
> + }
> +
> + *als_ir = ((msb& 0xF)<< 8) | (lsb& 0xFF);
> + return 0;
> +}
> +
> +static int isl29028_read_proxim(struct isl29028_chip *chip, int *prox)
> +{
> + unsigned int data;
> + int ret;
> +
> + ret = regmap_read(chip->regmap, ISL29028_REG_PROX_DATA,&data);
> + if (ret< 0) {
> + dev_err(chip->dev, "Error in reading register %d, error %d\n",
> + ISL29028_REG_PROX_DATA, ret);
> + return ret;
> + }
> + *prox = data;
> + return 0;
> +}
> +
> +static int isl29028_proxim_get(struct isl29028_chip *chip, int *prox_data)
> +{
> + int ret;
> +
> + if (!chip->enable_prox) {
> + ret = isl29028_enable_proximity(chip, true);
> + if (ret< 0)
> + return ret;
> + chip->enable_prox = true;
> + }
> + return isl29028_read_proxim(chip, prox_data);
> +}
> +
> +static int isl29028_als_get(struct isl29028_chip *chip, int *als_data)
> +{
> + int ret;
> + int als_ir_data;
> +
> + if (chip->als_ir_mode != MODE_ALS) {
> + ret = isl29028_set_als_ir_mode(chip, MODE_ALS);
> + if (ret< 0) {
> + dev_err(chip->dev,
> + "Error in enabling ALS mode err %d\n", ret);
> + return ret;
> + }
> + chip->als_ir_mode = MODE_ALS;
> + }
> +
> + ret = isl29028_read_als_ir(chip,&als_ir_data);
> + if (ret< 0)
> + return ret;
> +
> + /*
> + * convert als data count to lux.
> + * if lux_scale = 125, lux = count * 0.031
> + * if lux_scale = 2000, lux = count * 0.49
> + */
> + if (chip->lux_scale == 125)
> + als_ir_data = (als_ir_data * 31) / 1000;
> + else
> + als_ir_data = (als_ir_data * 49) / 100;
> +
> + *als_data = als_ir_data;
> + return 0;
> +}
> +
> +static int isl29028_ir_get(struct isl29028_chip *chip, int *ir_data)
> +{
> + int ret;
> +
> + if (chip->als_ir_mode != MODE_IR) {
> + ret = isl29028_set_als_ir_mode(chip, MODE_IR);
> + if (ret< 0) {
> + dev_err(chip->dev,
> + "Error in enabling IR mode err %d\n", ret);
> + return ret;
> + }
> + chip->als_ir_mode = MODE_IR;
> + }
> + return isl29028_read_als_ir(chip, ir_data);
> +}
> +
> +/* Channel IO */
> +static int isl29028_write_raw(struct iio_dev *indio_dev,
> + struct iio_chan_spec const *chan, int val, int val2, long mask)
> +{
> + struct isl29028_chip *chip = iio_priv(indio_dev);
> + int ret = -EINVAL;
> +
> + mutex_lock(&chip->lock);
> + switch (chan->type) {
> + case IIO_PROXIMITY:
> + if (mask != IIO_CHAN_INFO_SAMP_FREQ_SEPARATE_BIT) {
> + dev_err(chip->dev,
> + "proximity: mask value 0x%08lx not supported\n",
> + mask);
> + break;
> + }
> + if (val< 1 || val> 100) {
> + dev_err(chip->dev,
> + "Samp_freq %d is not in range[1:100]\n", val);
> + break;
> + }
> + ret = isl29028_set_proxim_sampling(chip, val);
> + if (ret< 0) {
> + dev_err(chip->dev,
> + "Setting proximity samp_freq fail, err %d\n",
> + ret);
> + break;
> + }
> + chip->prox_sampling = val;
> + break;
> +
> + case IIO_LIGHT:
> + if (mask != IIO_CHAN_INFO_SCALE_SEPARATE_BIT) {
> + dev_err(chip->dev,
> + "light: mask value 0x%08lx not supported\n",
> + mask);
> + break;
> + }
> + if ((val != 125)&& (val != 2000)) {
> + dev_err(chip->dev,
> + "lux scale %d is invalid [125, 2000]\n", val);
> + break;
> + }
> + ret = isl29028_set_als_scale(chip, val);
> + if (ret< 0) {
> + dev_err(chip->dev,
> + "Setting lux scale fail with error %d\n", ret);
> + break;
> + }
> + chip->lux_scale = val;
> + break;
> +
> + default:
> + dev_err(chip->dev, "Unsupported channel type\n");
> + break;
> + }
> + mutex_unlock(&chip->lock);
> + return ret;
> +}
> +
> +static int isl29028_read_raw(struct iio_dev *indio_dev,
> + struct iio_chan_spec const *chan, int *val, int *val2, long mask)
> +{
> + struct isl29028_chip *chip = iio_priv(indio_dev);
> + int ret = -EINVAL;
> +
> + mutex_lock(&chip->lock);
> + switch (mask) {
> + case 0:
> + switch (chan->type) {
> + case IIO_LIGHT:
> + ret = isl29028_als_get(chip, val);
> + break;
> + case IIO_INTENSITY:
> + ret = isl29028_ir_get(chip, val);
> + break;
> + case IIO_PROXIMITY:
> + ret = isl29028_proxim_get(chip, val);
> + break;
> + default:
> + break;
> + }
> + if (ret< 0)
> + break;
> + ret = IIO_VAL_INT;
> + break;
> +
> + case IIO_CHAN_INFO_SAMP_FREQ_SEPARATE_BIT:
> + if (chan->type != IIO_PROXIMITY)
> + break;
> + *val = chip->prox_sampling;
> + ret = IIO_VAL_INT;
> + break;
> +
> + case IIO_CHAN_INFO_SCALE_SEPARATE_BIT:
> + if (chan->type != IIO_LIGHT)
> + break;
> + *val = chip->lux_scale;
> + ret = IIO_VAL_INT;
> + break;
> +
> + default:
> + dev_err(chip->dev, "mask value 0x%08lx not supported\n", mask);
> + break;
> + }
> + mutex_unlock(&chip->lock);
> + return ret;
> +}
> +
> +static IIO_CONST_ATTR(proximity_sampling_frequency_available,
> + "1, 3, 5, 10, 13, 20, 83, 100");
> +static IIO_CONST_ATTR(illuminance_scale_available, "125, 2000");
> +
> +#define ISL29028_DEV_ATTR(name) (&iio_dev_attr_##name.dev_attr.attr)
> +#define ISL29028_CONST_ATTR(name) (&iio_const_attr_##name.dev_attr.attr)
> +static struct attribute *isl29028_attributes[] = {
> + ISL29028_CONST_ATTR(proximity_sampling_frequency_available),
tiny disconnect now that you have in_proximity0_sampling frequency, this
should be in_proximity0_sampling_frequency_available
> + ISL29028_CONST_ATTR(illuminance_scale_available),
snap here (sorry, missed that last time).
in_illuminance0_scale_available
> + NULL,
> +};
> +
> +static const struct attribute_group isl29108_group = {
> + .attrs = isl29028_attributes,
> +};
> +
> +static const struct iio_chan_spec isl29028_channels[] = {
> + {
> + .type = IIO_LIGHT,
> + .processed_val = 1,
> + .info_mask = IIO_CHAN_INFO_SCALE_SEPARATE_BIT,
> + }, {
> + .type = IIO_INTENSITY,
> + }, {
> + .type = IIO_PROXIMITY,
> + .info_mask = IIO_CHAN_INFO_SAMP_FREQ_SEPARATE_BIT,
> + }
> +};
> +
> +static const struct iio_info isl29028_info = {
> + .attrs =&isl29108_group,
> + .driver_module = THIS_MODULE,
> + .read_raw =&isl29028_read_raw,
> + .write_raw =&isl29028_write_raw,
> +};
> +
> +static int isl29028_chip_init(struct isl29028_chip *chip)
> +{
> + int ret;
> +
> + chip->enable_prox = false;
> + chip->prox_sampling = 20;
> + chip->lux_scale = 2000;
> + chip->als_ir_mode = MODE_NONE;
> +
> + ret = regmap_write(chip->regmap, ISL29028_REG_TEST1_MODE, 0x0);
> + if (ret< 0) {
> + dev_err(chip->dev, "%s(): write to reg %d failed, err = %d\n",
> + __func__, ISL29028_REG_TEST1_MODE, ret);
> + return ret;
> + }
> + ret = regmap_write(chip->regmap, ISL29028_REG_TEST2_MODE, 0x0);
> + if (ret< 0) {
> + dev_err(chip->dev, "%s(): write to reg %d failed, err = %d\n",
> + __func__, ISL29028_REG_TEST2_MODE, ret);
> + return ret;
> + }
> +
> + ret = regmap_write(chip->regmap, ISL29028_REG_CONFIGURE, 0x0);
> + if (ret< 0) {
> + dev_err(chip->dev, "%s(): write to reg %d failed, err = %d\n",
> + __func__, ISL29028_REG_CONFIGURE, ret);
> + return ret;
> + }
> +
> + ret = isl29028_set_proxim_sampling(chip, chip->prox_sampling);
> + if (ret< 0) {
> + dev_err(chip->dev, "%s(): setting the proximity, err = %d\n",
> + __func__, ret);
> + return ret;
> + }
> +
> + ret = isl29028_set_als_scale(chip, chip->lux_scale);
> + if (ret< 0)
> + dev_err(chip->dev, "%s(): setting als scale failed, err = %d\n",
> + __func__, ret);
> + return ret;
> +}
> +
> +static bool is_volatile_reg(struct device *dev, unsigned int reg)
> +{
> + switch (reg) {
> + case ISL29028_REG_INTERRUPT:
> + case ISL29028_REG_PROX_DATA:
> + case ISL29028_REG_ALSIR_L:
> + case ISL29028_REG_ALSIR_U:
> + return true;
> + default:
> + return false;
> + }
> +}
> +
> +static const struct regmap_config isl29028_regmap_config = {
> + .reg_bits = 8,
> + .val_bits = 8,
> + .volatile_reg = is_volatile_reg,
> + .max_register = ISL29028_MAX_REGS - 1,
> + .num_reg_defaults_raw = ISL29028_MAX_REGS,
> + .cache_type = REGCACHE_RBTREE,
> +};
> +
> +static int __devinit isl29028_probe(struct i2c_client *client,
> + const struct i2c_device_id *id)
> +{
> + struct isl29028_chip *chip;
> + struct iio_dev *indio_dev;
> + int ret;
> +
> + indio_dev = iio_allocate_device(sizeof(*chip));
> + if (!indio_dev) {
> + dev_err(&client->dev, "iio allocation fails\n");
> + return -ENOMEM;
> + }
> +
> + chip = iio_priv(indio_dev);
> +
> + i2c_set_clientdata(client, indio_dev);
> + chip->dev =&client->dev;
> + mutex_init(&chip->lock);
> +
> + chip->regmap = devm_regmap_init_i2c(client,&isl29028_regmap_config);
> + if (IS_ERR(chip->regmap)) {
> + ret = PTR_ERR(chip->regmap);
> + dev_err(chip->dev, "regmap initialization failed: %d\n", ret);
> + goto exit_iio_free;
> + }
> +
> + ret = isl29028_chip_init(chip);
> + if (ret< 0) {
> + dev_err(chip->dev, "chip initialization failed: %d\n", ret);
> + goto exit_iio_free;
> + }
> +
> + indio_dev->info =&isl29028_info;
> + indio_dev->channels = isl29028_channels;
> + indio_dev->num_channels = ARRAY_SIZE(isl29028_channels);
> + indio_dev->name = id->name;
> + indio_dev->dev.parent =&client->dev;
> + indio_dev->modes = INDIO_DIRECT_MODE;
> + ret = iio_device_register(indio_dev);
> + if (ret< 0) {
> + dev_err(chip->dev, "iio registration fails with error %d\n",
> + ret);
> + goto exit_iio_free;
> + }
> + return 0;
> +
> +exit_iio_free:
> + iio_free_device(indio_dev);
> + return ret;
> +}
> +
> +static int __devexit isl29028_remove(struct i2c_client *client)
> +{
> + struct iio_dev *indio_dev = i2c_get_clientdata(client);
> +
> + iio_device_unregister(indio_dev);
> + iio_free_device(indio_dev);
> + return 0;
> +}
> +
> +static const struct i2c_device_id isl29028_id[] = {
> + {"isl29028", 0},
> + {}
> +};
> +MODULE_DEVICE_TABLE(i2c, isl29028_id);
> +
> +static const struct of_device_id isl29028_of_match[] = {
> + { .compatible = "isl,isl29028", },
> + { },
> +};
> +MODULE_DEVICE_TABLE(of, isl29028_of_match);
> +
> +static struct i2c_driver isl29028_driver = {
> + .class = I2C_CLASS_HWMON,
> + .driver = {
> + .name = "isl29028",
> + .owner = THIS_MODULE,
> + .of_match_table = isl29028_of_match,
> + },
> + .probe = isl29028_probe,
> + .remove = __devexit_p(isl29028_remove),
> + .id_table = isl29028_id,
> +};
> +
> +module_i2c_driver(isl29028_driver);
> +
> +MODULE_DESCRIPTION("ISL29028 Ambient Light and Proximity Sensor driver");
> +MODULE_LICENSE("GPL v2");
> +MODULE_AUTHOR("Laxman Dewangan<ldewangan-DDmLM1+adcrQT0dZR+AlfA@public.gmane.org>");
^ permalink raw reply [flat|nested] 20+ messages in thread
* Re: [PATCH V4 2/2] staging: iio: add driver for isl29028
@ 2012-04-12 15:36 ` Stephen Warren
0 siblings, 0 replies; 20+ messages in thread
From: Stephen Warren @ 2012-04-12 15:36 UTC (permalink / raw)
To: Laxman Dewangan
Cc: jic23, gregkh, grant.likely, rob.herring, jbrenner, rklein, max,
linux-iio, devel, linux-kernel, devicetree-discuss
On 04/12/2012 08:01 AM, Laxman Dewangan wrote:
> Intersil's ISL29028 is concurrent Ambient Light and
> Proximity Sensor device.
> Add driver to access the light and IR intensity and
> +static const struct regmap_config isl29028_regmap_config = {
...
> + .max_register = ISL29028_MAX_REGS - 1,
> + .num_reg_defaults_raw = ISL29028_MAX_REGS,
This should really be ISL29028_NUM_REGS, since you don't have a maximum
number of registers, just a number of regs.
However, if there's no other reason to respin the patch, don't worry
about it.
^ permalink raw reply [flat|nested] 20+ messages in thread
* Re: [PATCH V4 2/2] staging: iio: add driver for isl29028
@ 2012-04-12 15:36 ` Stephen Warren
0 siblings, 0 replies; 20+ messages in thread
From: Stephen Warren @ 2012-04-12 15:36 UTC (permalink / raw)
To: Laxman Dewangan
Cc: jic23-KWPb1pKIrIJaa/9Udqfwiw,
gregkh-hQyY1W1yCW8ekmWlsbkhG0B+6BGkLq7r,
grant.likely-s3s/WqlpOiPyB63q8FvJNQ,
rob.herring-bsGFqQB8/DxBDgjK7y7TUQ,
jbrenner-yYKgigLBUwlBDgjK7y7TUQ, rklein-DDmLM1+adcrQT0dZR+AlfA,
max-U9r9yeDMy7A, linux-iio-u79uwXL29TY76Z2rM5mHXA,
devel-gWbeCf7V1WCQmaza687I9mD2FQJk+8+b,
linux-kernel-u79uwXL29TY76Z2rM5mHXA,
devicetree-discuss-uLR06cmDAlY/bJ5BZ2RsiQ
On 04/12/2012 08:01 AM, Laxman Dewangan wrote:
> Intersil's ISL29028 is concurrent Ambient Light and
> Proximity Sensor device.
> Add driver to access the light and IR intensity and
> +static const struct regmap_config isl29028_regmap_config = {
...
> + .max_register = ISL29028_MAX_REGS - 1,
> + .num_reg_defaults_raw = ISL29028_MAX_REGS,
This should really be ISL29028_NUM_REGS, since you don't have a maximum
number of registers, just a number of regs.
However, if there's no other reason to respin the patch, don't worry
about it.
^ permalink raw reply [flat|nested] 20+ messages in thread
* Re: [PATCH V4 2/2] staging: iio: add driver for isl29028
@ 2012-04-13 9:48 ` Laxman Dewangan
0 siblings, 0 replies; 20+ messages in thread
From: Laxman Dewangan @ 2012-04-13 9:48 UTC (permalink / raw)
To: Jonathan Cameron
Cc: gregkh, grant.likely, rob.herring, jbrenner, Rhyland Klein, max,
linux-iio, devel, linux-kernel, devicetree-discuss
On Thursday 12 April 2012 08:04 PM, Jonathan Cameron wrote:
> On 4/12/2012 3:01 PM, Laxman Dewangan wrote:
>> Intersil's ISL29028 is concurrent Ambient Light and
>> Proximity Sensor device.
>> Add driver to access the light and IR intensity and
>> proximity value via iio interface.
> Very nearly there. The available attributes need to match naming
> of what they are providing values for. (we need a better way of handling
> these but that's a job for another day).
>
> Otherwise, all good.
Fine, I will do change.
>> + mutex_unlock(&chip->lock);
>> + return ret;
>> +}
>> +
>> +static IIO_CONST_ATTR(proximity_sampling_frequency_available,
>> + "1, 3, 5, 10, 13, 20, 83, 100");
>> +static IIO_CONST_ATTR(illuminance_scale_available, "125, 2000");
>> +
>> +#define ISL29028_DEV_ATTR(name) (&iio_dev_attr_##name.dev_attr.attr)
>> +#define ISL29028_CONST_ATTR(name) (&iio_const_attr_##name.dev_attr.attr)
>> +static struct attribute *isl29028_attributes[] = {
>> + ISL29028_CONST_ATTR(proximity_sampling_frequency_available),
> tiny disconnect now that you have in_proximity0_sampling frequency, this
> should be in_proximity0_sampling_frequency_available
>
I saw the attribute appear as
in_illuminance_input
in_illuminance_scale
in_intensity_raw
in_proximity_raw
in_proximity_sampling_frequency
As I have not set the .indexed to non-zero, I will go as non-indexd
name like
in_proximity_sampling_frequency_available.
>> + ISL29028_CONST_ATTR(illuminance_scale_available),
> snap here (sorry, missed that last time).
>
> in_illuminance0_scale_available
>
I think should be in_illuminance_scale_available
^ permalink raw reply [flat|nested] 20+ messages in thread
* Re: [PATCH V4 2/2] staging: iio: add driver for isl29028
@ 2012-04-13 9:48 ` Laxman Dewangan
0 siblings, 0 replies; 20+ messages in thread
From: Laxman Dewangan @ 2012-04-13 9:48 UTC (permalink / raw)
To: Jonathan Cameron
Cc: gregkh-hQyY1W1yCW8ekmWlsbkhG0B+6BGkLq7r,
grant.likely-s3s/WqlpOiPyB63q8FvJNQ,
rob.herring-bsGFqQB8/DxBDgjK7y7TUQ,
jbrenner-yYKgigLBUwlBDgjK7y7TUQ, Rhyland Klein, max-U9r9yeDMy7A,
linux-iio-u79uwXL29TY76Z2rM5mHXA,
devel-gWbeCf7V1WCQmaza687I9mD2FQJk+8+b,
linux-kernel-u79uwXL29TY76Z2rM5mHXA,
devicetree-discuss-uLR06cmDAlY/bJ5BZ2RsiQ
On Thursday 12 April 2012 08:04 PM, Jonathan Cameron wrote:
> On 4/12/2012 3:01 PM, Laxman Dewangan wrote:
>> Intersil's ISL29028 is concurrent Ambient Light and
>> Proximity Sensor device.
>> Add driver to access the light and IR intensity and
>> proximity value via iio interface.
> Very nearly there. The available attributes need to match naming
> of what they are providing values for. (we need a better way of handling
> these but that's a job for another day).
>
> Otherwise, all good.
Fine, I will do change.
>> + mutex_unlock(&chip->lock);
>> + return ret;
>> +}
>> +
>> +static IIO_CONST_ATTR(proximity_sampling_frequency_available,
>> + "1, 3, 5, 10, 13, 20, 83, 100");
>> +static IIO_CONST_ATTR(illuminance_scale_available, "125, 2000");
>> +
>> +#define ISL29028_DEV_ATTR(name) (&iio_dev_attr_##name.dev_attr.attr)
>> +#define ISL29028_CONST_ATTR(name) (&iio_const_attr_##name.dev_attr.attr)
>> +static struct attribute *isl29028_attributes[] = {
>> + ISL29028_CONST_ATTR(proximity_sampling_frequency_available),
> tiny disconnect now that you have in_proximity0_sampling frequency, this
> should be in_proximity0_sampling_frequency_available
>
I saw the attribute appear as
in_illuminance_input
in_illuminance_scale
in_intensity_raw
in_proximity_raw
in_proximity_sampling_frequency
As I have not set the .indexed to non-zero, I will go as non-indexd
name like
in_proximity_sampling_frequency_available.
>> + ISL29028_CONST_ATTR(illuminance_scale_available),
> snap here (sorry, missed that last time).
>
> in_illuminance0_scale_available
>
I think should be in_illuminance_scale_available
^ permalink raw reply [flat|nested] 20+ messages in thread
* Re: [PATCH V4 2/2] staging: iio: add driver for isl29028
@ 2012-04-13 9:48 ` Laxman Dewangan
0 siblings, 0 replies; 20+ messages in thread
From: Laxman Dewangan @ 2012-04-13 9:48 UTC (permalink / raw)
To: Jonathan Cameron
Cc: gregkh, grant.likely, rob.herring, jbrenner, Rhyland Klein, max,
linux-iio, devel, linux-kernel, devicetree-discuss
On Thursday 12 April 2012 08:04 PM, Jonathan Cameron wrote:
> On 4/12/2012 3:01 PM, Laxman Dewangan wrote:
>> Intersil's ISL29028 is concurrent Ambient Light and
>> Proximity Sensor device.
>> Add driver to access the light and IR intensity and
>> proximity value via iio interface.
> Very nearly there. The available attributes need to match naming
> of what they are providing values for. (we need a better way of handling
> these but that's a job for another day).
>
> Otherwise, all good.
Fine, I will do change.
>> + mutex_unlock(&chip->lock);
>> + return ret;
>> +}
>> +
>> +static IIO_CONST_ATTR(proximity_sampling_frequency_available,
>> + "1, 3, 5, 10, 13, 20, 83, 100");
>> +static IIO_CONST_ATTR(illuminance_scale_available, "125, 2000");
>> +
>> +#define ISL29028_DEV_ATTR(name) (&iio_dev_attr_##name.dev_attr.attr)
>> +#define ISL29028_CONST_ATTR(name) (&iio_const_attr_##name.dev_attr.attr)
>> +static struct attribute *isl29028_attributes[] = {
>> + ISL29028_CONST_ATTR(proximity_sampling_frequency_available),
> tiny disconnect now that you have in_proximity0_sampling frequency, this
> should be in_proximity0_sampling_frequency_available
>
I saw the attribute appear as
in_illuminance_input
in_illuminance_scale
in_intensity_raw
in_proximity_raw
in_proximity_sampling_frequency
As I have not set the .indexed to non-zero, I will go as non-indexd
name like
in_proximity_sampling_frequency_available.
>> + ISL29028_CONST_ATTR(illuminance_scale_available),
> snap here (sorry, missed that last time).
>
> in_illuminance0_scale_available
>
I think should be in_illuminance_scale_available
^ permalink raw reply [flat|nested] 20+ messages in thread
* Re: [PATCH V4 2/2] staging: iio: add driver for isl29028
@ 2012-04-13 9:49 ` Laxman Dewangan
0 siblings, 0 replies; 20+ messages in thread
From: Laxman Dewangan @ 2012-04-13 9:49 UTC (permalink / raw)
To: Jonathan Cameron
Cc: gregkh, grant.likely, rob.herring, jbrenner, Rhyland Klein, max,
linux-iio, devel, linux-kernel, devicetree-discuss
On Thursday 12 April 2012 08:04 PM, Jonathan Cameron wrote:
> On 4/12/2012 3:01 PM, Laxman Dewangan wrote:
>> Intersil's ISL29028 is concurrent Ambient Light and
>> Proximity Sensor device.
>> Add driver to access the light and IR intensity and
>> proximity value via iio interface.
> Very nearly there. The available attributes need to match naming
> of what they are providing values for. (we need a better way of handling
> these but that's a job for another day).
>
> Otherwise, all good.
Fine, I will do change.
>> + mutex_unlock(&chip->lock);
>> + return ret;
>> +}
>> +
>> +static IIO_CONST_ATTR(proximity_sampling_frequency_available,
>> + "1, 3, 5, 10, 13, 20, 83, 100");
>> +static IIO_CONST_ATTR(illuminance_scale_available, "125, 2000");
>> +
>> +#define ISL29028_DEV_ATTR(name) (&iio_dev_attr_##name.dev_attr.attr)
>> +#define ISL29028_CONST_ATTR(name) (&iio_const_attr_##name.dev_attr.attr)
>> +static struct attribute *isl29028_attributes[] = {
>> + ISL29028_CONST_ATTR(proximity_sampling_frequency_available),
> tiny disconnect now that you have in_proximity0_sampling frequency, this
> should be in_proximity0_sampling_frequency_available
>
I saw the attribute appear as
in_illuminance_input
in_illuminance_scale
in_intensity_raw
in_proximity_raw
in_proximity_sampling_frequency
As I have not set the .indexed to non-zero, I will go as non-indexd
name like
in_proximity_sampling_frequency_available.
>> + ISL29028_CONST_ATTR(illuminance_scale_available),
> snap here (sorry, missed that last time).
>
> in_illuminance0_scale_available
>
I think should be in_illuminance_scale_available
^ permalink raw reply [flat|nested] 20+ messages in thread
* Re: [PATCH V4 2/2] staging: iio: add driver for isl29028
@ 2012-04-13 9:49 ` Laxman Dewangan
0 siblings, 0 replies; 20+ messages in thread
From: Laxman Dewangan @ 2012-04-13 9:49 UTC (permalink / raw)
To: Jonathan Cameron
Cc: gregkh-hQyY1W1yCW8ekmWlsbkhG0B+6BGkLq7r,
grant.likely-s3s/WqlpOiPyB63q8FvJNQ,
rob.herring-bsGFqQB8/DxBDgjK7y7TUQ,
jbrenner-yYKgigLBUwlBDgjK7y7TUQ, Rhyland Klein, max-U9r9yeDMy7A,
linux-iio-u79uwXL29TY76Z2rM5mHXA,
devel-gWbeCf7V1WCQmaza687I9mD2FQJk+8+b,
linux-kernel-u79uwXL29TY76Z2rM5mHXA,
devicetree-discuss-uLR06cmDAlY/bJ5BZ2RsiQ
On Thursday 12 April 2012 08:04 PM, Jonathan Cameron wrote:
> On 4/12/2012 3:01 PM, Laxman Dewangan wrote:
>> Intersil's ISL29028 is concurrent Ambient Light and
>> Proximity Sensor device.
>> Add driver to access the light and IR intensity and
>> proximity value via iio interface.
> Very nearly there. The available attributes need to match naming
> of what they are providing values for. (we need a better way of handling
> these but that's a job for another day).
>
> Otherwise, all good.
Fine, I will do change.
>> + mutex_unlock(&chip->lock);
>> + return ret;
>> +}
>> +
>> +static IIO_CONST_ATTR(proximity_sampling_frequency_available,
>> + "1, 3, 5, 10, 13, 20, 83, 100");
>> +static IIO_CONST_ATTR(illuminance_scale_available, "125, 2000");
>> +
>> +#define ISL29028_DEV_ATTR(name) (&iio_dev_attr_##name.dev_attr.attr)
>> +#define ISL29028_CONST_ATTR(name) (&iio_const_attr_##name.dev_attr.attr)
>> +static struct attribute *isl29028_attributes[] = {
>> + ISL29028_CONST_ATTR(proximity_sampling_frequency_available),
> tiny disconnect now that you have in_proximity0_sampling frequency, this
> should be in_proximity0_sampling_frequency_available
>
I saw the attribute appear as
in_illuminance_input
in_illuminance_scale
in_intensity_raw
in_proximity_raw
in_proximity_sampling_frequency
As I have not set the .indexed to non-zero, I will go as non-indexd
name like
in_proximity_sampling_frequency_available.
>> + ISL29028_CONST_ATTR(illuminance_scale_available),
> snap here (sorry, missed that last time).
>
> in_illuminance0_scale_available
>
I think should be in_illuminance_scale_available
^ permalink raw reply [flat|nested] 20+ messages in thread
* Re: [PATCH V4 2/2] staging: iio: add driver for isl29028
@ 2012-04-13 9:49 ` Laxman Dewangan
0 siblings, 0 replies; 20+ messages in thread
From: Laxman Dewangan @ 2012-04-13 9:49 UTC (permalink / raw)
To: Jonathan Cameron
Cc: gregkh, grant.likely, rob.herring, jbrenner, Rhyland Klein, max,
linux-iio, devel, linux-kernel, devicetree-discuss
On Thursday 12 April 2012 08:04 PM, Jonathan Cameron wrote:
> On 4/12/2012 3:01 PM, Laxman Dewangan wrote:
>> Intersil's ISL29028 is concurrent Ambient Light and
>> Proximity Sensor device.
>> Add driver to access the light and IR intensity and
>> proximity value via iio interface.
> Very nearly there. The available attributes need to match naming
> of what they are providing values for. (we need a better way of handling
> these but that's a job for another day).
>
> Otherwise, all good.
Fine, I will do change.
>> + mutex_unlock(&chip->lock);
>> + return ret;
>> +}
>> +
>> +static IIO_CONST_ATTR(proximity_sampling_frequency_available,
>> + "1, 3, 5, 10, 13, 20, 83, 100");
>> +static IIO_CONST_ATTR(illuminance_scale_available, "125, 2000");
>> +
>> +#define ISL29028_DEV_ATTR(name) (&iio_dev_attr_##name.dev_attr.attr)
>> +#define ISL29028_CONST_ATTR(name) (&iio_const_attr_##name.dev_attr.attr)
>> +static struct attribute *isl29028_attributes[] = {
>> + ISL29028_CONST_ATTR(proximity_sampling_frequency_available),
> tiny disconnect now that you have in_proximity0_sampling frequency, this
> should be in_proximity0_sampling_frequency_available
>
I saw the attribute appear as
in_illuminance_input
in_illuminance_scale
in_intensity_raw
in_proximity_raw
in_proximity_sampling_frequency
As I have not set the .indexed to non-zero, I will go as non-indexd
name like
in_proximity_sampling_frequency_available.
>> + ISL29028_CONST_ATTR(illuminance_scale_available),
> snap here (sorry, missed that last time).
>
> in_illuminance0_scale_available
>
I think should be in_illuminance_scale_available
^ permalink raw reply [flat|nested] 20+ messages in thread
* Re: [PATCH V4 2/2] staging: iio: add driver for isl29028
2012-04-13 9:48 ` Laxman Dewangan
(?)
@ 2012-04-13 10:05 ` Jonathan Cameron
-1 siblings, 0 replies; 20+ messages in thread
From: Jonathan Cameron @ 2012-04-13 10:05 UTC (permalink / raw)
To: Laxman Dewangan
Cc: gregkh, grant.likely, rob.herring, jbrenner, Rhyland Klein, max,
linux-iio, devel, linux-kernel, devicetree-discuss
On 4/13/2012 10:48 AM, Laxman Dewangan wrote:
> On Thursday 12 April 2012 08:04 PM, Jonathan Cameron wrote:
>> On 4/12/2012 3:01 PM, Laxman Dewangan wrote:
>>> Intersil's ISL29028 is concurrent Ambient Light and
>>> Proximity Sensor device.
>>> Add driver to access the light and IR intensity and
>>> proximity value via iio interface.
>> Very nearly there. The available attributes need to match naming
>> of what they are providing values for. (we need a better way of handling
>> these but that's a job for another day).
>>
>> Otherwise, all good.
>
> Fine, I will do change.
>
>>> + mutex_unlock(&chip->lock);
>>> + return ret;
>>> +}
>>> +
>>> +static IIO_CONST_ATTR(proximity_sampling_frequency_available,
>>> + "1, 3, 5, 10, 13, 20, 83, 100");
>>> +static IIO_CONST_ATTR(illuminance_scale_available, "125, 2000");
>>> +
>>> +#define ISL29028_DEV_ATTR(name) (&iio_dev_attr_##name.dev_attr.attr)
>>> +#define ISL29028_CONST_ATTR(name)
>>> (&iio_const_attr_##name.dev_attr.attr)
>>> +static struct attribute *isl29028_attributes[] = {
>>> + ISL29028_CONST_ATTR(proximity_sampling_frequency_available),
>> tiny disconnect now that you have in_proximity0_sampling frequency, this
>> should be in_proximity0_sampling_frequency_available
>>
>
> I saw the attribute appear as
> in_illuminance_input
> in_illuminance_scale
> in_intensity_raw
> in_proximity_raw
> in_proximity_sampling_frequency
>
>
> As I have not set the .indexed to non-zero, I will go as non-indexd
> name like
> in_proximity_sampling_frequency_available.
Fair enough.
>
>>> + ISL29028_CONST_ATTR(illuminance_scale_available),
>> snap here (sorry, missed that last time).
>>
>> in_illuminance0_scale_available
>>
>
> I think should be in_illuminance_scale_available
yup
>
> --
> To unsubscribe from this list: send the line "unsubscribe linux-iio" in
> the body of a message to majordomo@vger.kernel.org
> More majordomo info at http://vger.kernel.org/majordomo-info.html
^ permalink raw reply [flat|nested] 20+ messages in thread
* Re: [PATCH V4 2/2] staging: iio: add driver for isl29028
@ 2012-04-13 10:05 ` Jonathan Cameron
0 siblings, 0 replies; 20+ messages in thread
From: Jonathan Cameron @ 2012-04-13 10:05 UTC (permalink / raw)
To: Laxman Dewangan
Cc: devel, max, jbrenner, linux-iio, gregkh, Rhyland Klein,
linux-kernel, rob.herring, grant.likely, devicetree-discuss
On 4/13/2012 10:48 AM, Laxman Dewangan wrote:
> On Thursday 12 April 2012 08:04 PM, Jonathan Cameron wrote:
>> On 4/12/2012 3:01 PM, Laxman Dewangan wrote:
>>> Intersil's ISL29028 is concurrent Ambient Light and
>>> Proximity Sensor device.
>>> Add driver to access the light and IR intensity and
>>> proximity value via iio interface.
>> Very nearly there. The available attributes need to match naming
>> of what they are providing values for. (we need a better way of handling
>> these but that's a job for another day).
>>
>> Otherwise, all good.
>
> Fine, I will do change.
>
>>> + mutex_unlock(&chip->lock);
>>> + return ret;
>>> +}
>>> +
>>> +static IIO_CONST_ATTR(proximity_sampling_frequency_available,
>>> + "1, 3, 5, 10, 13, 20, 83, 100");
>>> +static IIO_CONST_ATTR(illuminance_scale_available, "125, 2000");
>>> +
>>> +#define ISL29028_DEV_ATTR(name) (&iio_dev_attr_##name.dev_attr.attr)
>>> +#define ISL29028_CONST_ATTR(name)
>>> (&iio_const_attr_##name.dev_attr.attr)
>>> +static struct attribute *isl29028_attributes[] = {
>>> + ISL29028_CONST_ATTR(proximity_sampling_frequency_available),
>> tiny disconnect now that you have in_proximity0_sampling frequency, this
>> should be in_proximity0_sampling_frequency_available
>>
>
> I saw the attribute appear as
> in_illuminance_input
> in_illuminance_scale
> in_intensity_raw
> in_proximity_raw
> in_proximity_sampling_frequency
>
>
> As I have not set the .indexed to non-zero, I will go as non-indexd
> name like
> in_proximity_sampling_frequency_available.
Fair enough.
>
>>> + ISL29028_CONST_ATTR(illuminance_scale_available),
>> snap here (sorry, missed that last time).
>>
>> in_illuminance0_scale_available
>>
>
> I think should be in_illuminance_scale_available
yup
>
> --
> To unsubscribe from this list: send the line "unsubscribe linux-iio" in
> the body of a message to majordomo@vger.kernel.org
> More majordomo info at http://vger.kernel.org/majordomo-info.html
^ permalink raw reply [flat|nested] 20+ messages in thread
* Re: [PATCH V4 2/2] staging: iio: add driver for isl29028
@ 2012-04-13 10:05 ` Jonathan Cameron
0 siblings, 0 replies; 20+ messages in thread
From: Jonathan Cameron @ 2012-04-13 10:05 UTC (permalink / raw)
To: Laxman Dewangan
Cc: gregkh, grant.likely, rob.herring, jbrenner, Rhyland Klein, max,
linux-iio, devel, linux-kernel, devicetree-discuss
On 4/13/2012 10:48 AM, Laxman Dewangan wrote:
> On Thursday 12 April 2012 08:04 PM, Jonathan Cameron wrote:
>> On 4/12/2012 3:01 PM, Laxman Dewangan wrote:
>>> Intersil's ISL29028 is concurrent Ambient Light and
>>> Proximity Sensor device.
>>> Add driver to access the light and IR intensity and
>>> proximity value via iio interface.
>> Very nearly there. The available attributes need to match naming
>> of what they are providing values for. (we need a better way of handling
>> these but that's a job for another day).
>>
>> Otherwise, all good.
>
> Fine, I will do change.
>
>>> + mutex_unlock(&chip->lock);
>>> + return ret;
>>> +}
>>> +
>>> +static IIO_CONST_ATTR(proximity_sampling_frequency_available,
>>> + "1, 3, 5, 10, 13, 20, 83, 100");
>>> +static IIO_CONST_ATTR(illuminance_scale_available, "125, 2000");
>>> +
>>> +#define ISL29028_DEV_ATTR(name) (&iio_dev_attr_##name.dev_attr.attr)
>>> +#define ISL29028_CONST_ATTR(name)
>>> (&iio_const_attr_##name.dev_attr.attr)
>>> +static struct attribute *isl29028_attributes[] = {
>>> + ISL29028_CONST_ATTR(proximity_sampling_frequency_available),
>> tiny disconnect now that you have in_proximity0_sampling frequency, this
>> should be in_proximity0_sampling_frequency_available
>>
>
> I saw the attribute appear as
> in_illuminance_input
> in_illuminance_scale
> in_intensity_raw
> in_proximity_raw
> in_proximity_sampling_frequency
>
>
> As I have not set the .indexed to non-zero, I will go as non-indexd
> name like
> in_proximity_sampling_frequency_available.
Fair enough.
>
>>> + ISL29028_CONST_ATTR(illuminance_scale_available),
>> snap here (sorry, missed that last time).
>>
>> in_illuminance0_scale_available
>>
>
> I think should be in_illuminance_scale_available
yup
>
> --
> To unsubscribe from this list: send the line "unsubscribe linux-iio" in
> the body of a message to majordomo@vger.kernel.org
> More majordomo info at http://vger.kernel.org/majordomo-info.html
^ permalink raw reply [flat|nested] 20+ messages in thread
end of thread, other threads:[~2012-04-13 10:05 UTC | newest]
Thread overview: 20+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2012-04-12 14:01 [PATCH V4 0/2] staging: iio: add isl29028 driver Laxman Dewangan
2012-04-12 14:01 ` Laxman Dewangan
2012-04-12 14:01 ` [PATCH V4 1/2] staging: iio: add channel info for sampling frequency Laxman Dewangan
2012-04-12 14:27 ` Jonathan Cameron
2012-04-12 14:27 ` Jonathan Cameron
2012-04-12 14:01 ` [PATCH V4 2/2] staging: iio: add driver for isl29028 Laxman Dewangan
2012-04-12 14:01 ` Laxman Dewangan
2012-04-12 14:34 ` Jonathan Cameron
2012-04-12 14:34 ` Jonathan Cameron
2012-04-13 9:48 ` Laxman Dewangan
2012-04-13 9:48 ` Laxman Dewangan
2012-04-13 9:48 ` Laxman Dewangan
2012-04-13 10:05 ` Jonathan Cameron
2012-04-13 10:05 ` Jonathan Cameron
2012-04-13 10:05 ` Jonathan Cameron
2012-04-13 9:49 ` Laxman Dewangan
2012-04-13 9:49 ` Laxman Dewangan
2012-04-13 9:49 ` Laxman Dewangan
2012-04-12 15:36 ` Stephen Warren
2012-04-12 15:36 ` Stephen Warren
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.