* [PATCH 0/4] Add support for Atmel's AT91SAM9N12-EK (With DT)
@ 2012-04-12 6:26 Hong Xu
2012-04-12 6:26 ` [PATCH 1/4] AT91: Add DT description files for AT91SAM9N12-EK Hong Xu
` (3 more replies)
0 siblings, 4 replies; 14+ messages in thread
From: Hong Xu @ 2012-04-12 6:26 UTC (permalink / raw)
To: linux-arm-kernel
This series adds support for Atmel's AT91SAM9N12-EK.
Patches are on top of v3.4-rc2 and target for v3.5
Hong Xu (4):
AT91: Add DT description files for AT91SAM9N12-EK
AT91: Add machine header file for AT91SAM9N12 SoC
AT91: Add machine files for AT91SAM9N12 SoC
Add default kernel configuration file for AT91SAM9N12-EK
arch/arm/boot/dts/at91sam9n12.dtsi | 223 +++
arch/arm/boot/dts/at91sam9n12ek.dts | 111 ++
arch/arm/configs/at91sam9n12ek_defconfig | 1862 ++++++++++++++++++++
arch/arm/mach-at91/Kconfig | 9 +
arch/arm/mach-at91/Makefile | 1 +
arch/arm/mach-at91/at91sam9n12.c | 275 +++
arch/arm/mach-at91/board-dt.c | 1 +
arch/arm/mach-at91/clock.c | 15 +-
arch/arm/mach-at91/include/mach/at91sam9n12.h | 68 +
.../mach-at91/include/mach/at91sam9n12_matrix.h | 53 +
arch/arm/mach-at91/include/mach/cpu.h | 10 +
arch/arm/mach-at91/include/mach/hardware.h | 2 +
arch/arm/mach-at91/setup.c | 6 +
arch/arm/mach-at91/soc.h | 5 +
14 files changed, 2636 insertions(+), 5 deletions(-)
create mode 100644 arch/arm/boot/dts/at91sam9n12.dtsi
create mode 100644 arch/arm/boot/dts/at91sam9n12ek.dts
create mode 100644 arch/arm/configs/at91sam9n12ek_defconfig
create mode 100644 arch/arm/mach-at91/at91sam9n12.c
create mode 100644 arch/arm/mach-at91/include/mach/at91sam9n12.h
create mode 100644 arch/arm/mach-at91/include/mach/at91sam9n12_matrix.h
--
1.7.3.3
^ permalink raw reply [flat|nested] 14+ messages in thread
* [PATCH 1/4] AT91: Add DT description files for AT91SAM9N12-EK
2012-04-12 6:26 [PATCH 0/4] Add support for Atmel's AT91SAM9N12-EK (With DT) Hong Xu
@ 2012-04-12 6:26 ` Hong Xu
2012-04-12 7:26 ` Ludovic Desroches
2012-04-13 16:20 ` Nicolas Ferre
2012-04-12 6:26 ` [PATCH 2/4] AT91: Add machine header file for AT91SAM9N12 SoC Hong Xu
` (2 subsequent siblings)
3 siblings, 2 replies; 14+ messages in thread
From: Hong Xu @ 2012-04-12 6:26 UTC (permalink / raw)
To: linux-arm-kernel
Added AT91SAM9N12 SoC DT file, as well as the board definition file
for AT91SAM9N12-EK
Signed-off-by: Hong Xu <hong.xu@atmel.com>
---
arch/arm/boot/dts/at91sam9n12.dtsi | 223 +++++++++++++++++++++++++++++++++++
arch/arm/boot/dts/at91sam9n12ek.dts | 111 +++++++++++++++++
2 files changed, 334 insertions(+), 0 deletions(-)
create mode 100644 arch/arm/boot/dts/at91sam9n12.dtsi
create mode 100644 arch/arm/boot/dts/at91sam9n12ek.dts
diff --git a/arch/arm/boot/dts/at91sam9n12.dtsi b/arch/arm/boot/dts/at91sam9n12.dtsi
new file mode 100644
index 0000000..e86372d
--- /dev/null
+++ b/arch/arm/boot/dts/at91sam9n12.dtsi
@@ -0,0 +1,223 @@
+/*
+ * at91sam9n12.dtsi - Device Tree include file for AT91SAM9N12 SoC
+ *
+ * Copyright (C) 2012 Atmel,
+ * 2012 Hong Xu <hong.xu@atmel.com>
+ *
+ * Licensed under GPLv2 or later.
+ */
+
+/include/ "skeleton.dtsi"
+
+/ {
+ model = "Atmel AT91SAM9N12 SoC";
+ compatible = "atmel,at91sam9n12";
+ interrupt-parent = <&aic>;
+
+ aliases {
+ serial0 = &dbgu;
+ serial1 = &usart0;
+ serial2 = &usart1;
+ serial3 = &usart2;
+ serial4 = &usart3;
+ gpio0 = &pioA;
+ gpio1 = &pioB;
+ gpio2 = &pioC;
+ gpio3 = &pioD;
+ tcb0 = &tcb0;
+ tcb1 = &tcb1;
+ };
+ cpus {
+ cpu at 0 {
+ compatible = "arm,arm926ejs";
+ };
+ };
+
+ memory at 20000000 {
+ reg = <0x20000000 0x10000000>;
+ };
+
+ ahb {
+ compatible = "simple-bus";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges;
+
+ apb {
+ compatible = "simple-bus";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges;
+
+ aic: interrupt-controller at fffff000 {
+ #interrupt-cells = <2>;
+ compatible = "atmel,at91rm9200-aic";
+ interrupt-controller;
+ interrupt-parent;
+ reg = <0xfffff000 0x200>;
+ };
+
+ ramc0: ramc at ffffe800 {
+ compatible = "atmel,at91sam9g45-ddramc";
+ reg = <0xffffe800 0x200>;
+ };
+
+ pmc: pmc at fffffc00 {
+ compatible = "atmel,at91rm9200-pmc";
+ reg = <0xfffffc00 0x100>;
+ };
+
+ rstc at fffffe00 {
+ compatible = "atmel,at91sam9g45-rstc";
+ reg = <0xfffffe00 0x10>;
+ };
+
+ pit: timer at fffffe30 {
+ compatible = "atmel,at91sam9260-pit";
+ reg = <0xfffffe30 0xf>;
+ interrupts = <1 4>;
+ };
+
+
+ shdwc at fffffe10 {
+ compatible = "atmel,at91sam9n12-shdwc";
+ reg = <0xfffffe10 0x10>;
+ };
+
+ tcb0: timer at f8008000 {
+ compatible = "atmel,at91sam9n12-tcb";
+ reg = <0xf8008000 0x100>;
+ interrupts = <17 4>;
+ };
+
+ tcb1: timer at f800c000 {
+ compatible = "atmel,at91sam9n12-tcb";
+ reg = <0xf800c000 0x100>;
+ interrupts = <17 4>;
+ };
+
+ dma: dma-controller at ffffec00 {
+ compatible = "atmel,at91sam9g45-dma";
+ reg = <0xffffec00 0x200>;
+ interrupts = <20 4>;
+ };
+
+ pioA: gpio at fffff400 {
+ compatible = "atmel,at91sam9x5-gpio", "atmel,at91rm9200-gpio";
+ reg = <0xfffff400 0x100>;
+ interrupts = <2 4>;
+ #gpio-cells = <2>;
+ gpio-controller;
+ interrupt-controller;
+ };
+
+ pioB: gpio at fffff600 {
+ compatible = "atmel,at91sam9x5-gpio", "atmel,at91rm9200-gpio";
+ reg = <0xfffff600 0x100>;
+ interrupts = <2 4>;
+ #gpio-cells = <2>;
+ gpio-controller;
+ interrupt-controller;
+ };
+
+ pioC: gpio at fffff800 {
+ compatible = "atmel,at91sam9x5-gpio", "atmel,at91rm9200-gpio";
+ reg = <0xfffff800 0x100>;
+ interrupts = <3 4>;
+ #gpio-cells = <2>;
+ gpio-controller;
+ interrupt-controller;
+ };
+
+ pioD: gpio at fffffa00 {
+ compatible = "atmel,at91sam9x5-gpio", "atmel,at91rm9200-gpio";
+ reg = <0xfffffa00 0x100>;
+ interrupts = <3 4>;
+ #gpio-cells = <2>;
+ gpio-controller;
+ interrupt-controller;
+ };
+
+ dbgu: serial at fffff200 {
+ compatible = "atmel,at91sam9260-usart";
+ reg = <0xfffff200 0x200>;
+ interrupts = <1 4>;
+ status = "disabled";
+ };
+
+ usart0: serial at f801c000 {
+ compatible = "atmel,at91sam9260-usart";
+ reg = <0xf801c000 0x4000>;
+ interrupts = <5 4>;
+ atmel,use-dma-rx;
+ atmel,use-dma-tx;
+ status = "disabled";
+ };
+
+ usart1: serial at f8020000 {
+ compatible = "atmel,at91sam9260-usart";
+ reg = <0xf8020000 0x4000>;
+ interrupts = <6 4>;
+ atmel,use-dma-rx;
+ atmel,use-dma-tx;
+ status = "disabled";
+ };
+
+ usart2: serial at f8024000 {
+ compatible = "atmel,at91sam9260-usart";
+ reg = <0xf8024000 0x4000>;
+ interrupts = <7 4>;
+ atmel,use-dma-rx;
+ atmel,use-dma-tx;
+ status = "disabled";
+ };
+
+ usart3: serial at f8028000 {
+ compatible = "atmel,at91sam9260-usart";
+ reg = <0xf8028000 0x4000>;
+ interrupts = <8 4>;
+ atmel,use-dma-rx;
+ atmel,use-dma-tx;
+ status = "disabled";
+ };
+ };
+
+ nand0: nand at 40000000 {
+ compatible = "atmel,at91rm9200-nand";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ reg = < 0x40000000 0x10000000
+ 0xffffe000 0x00000600
+ 0xffffe600 0x00000200
+ 0x00100000 0x00100000
+ >;
+ atmel,nand-addr-offset = <21>;
+ atmel,nand-cmd-offset = <22>;
+ gpios = <&pioD 5 0
+ &pioD 4 0
+ 0
+ >;
+ status = "disabled";
+ };
+
+ usb0: ohci at 00500000 {
+ compatible = "atmel,at91rm9200-ohci", "usb-ohci";
+ reg = <0x00500000 0x00100000>;
+ interrupts = <22 4>;
+ status = "disabled";
+ };
+ };
+
+ i2c at 0 {
+ compatible = "i2c-gpio";
+ gpios = <&pioA 30 0 /* sda */
+ &pioA 31 0 /* scl */
+ >;
+ i2c-gpio,sda-open-drain;
+ i2c-gpio,scl-open-drain;
+ i2c-gpio,delay-us = <2>; /* ~100 kHz */
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+};
diff --git a/arch/arm/boot/dts/at91sam9n12ek.dts b/arch/arm/boot/dts/at91sam9n12ek.dts
new file mode 100644
index 0000000..56b012f
--- /dev/null
+++ b/arch/arm/boot/dts/at91sam9n12ek.dts
@@ -0,0 +1,111 @@
+/*
+ * at91sam9n12ek.dts - Device Tree file for AT91SAM9N12-EK board
+ *
+ * Copyright (C) 2012 Atmel,
+ * 2012 Hong Xu <hong.xu@atmel.com>
+ *
+ * Licensed under GPLv2 or later.
+ */
+/dts-v1/;
+/include/ "at91sam9n12.dtsi"
+
+/ {
+ model = "Atmel AT91SAM9N12-EK";
+ compatible = "atmel,at91sam9n12ek", "atmel,at91sam9n12", "atmel,at91sam9";
+
+ chosen {
+ bootargs = "mem=128M console=ttyS0,115200 root=/dev/mtdblock1 rw rootfstype=jffs2";
+ };
+
+ memory at 20000000 {
+ reg = <0x20000000 0x10000000>;
+ };
+
+ clocks {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges;
+
+ main_clock: clock at 0 {
+ compatible = "atmel,osc", "fixed-clock";
+ clock-frequency = <16000000>;
+ };
+ };
+
+ ahb {
+ apb {
+ dbgu: serial at fffff200 {
+ status = "okay";
+ };
+
+ tcb0: timer at f8008000 {
+ status = "okay";
+ };
+
+ tcb1: timer at f800c000 {
+ status = "okay";
+ };
+ };
+
+ nand0: nand at 40000000 {
+ nand-bus-width = <8>;
+ nand-ecc-mode = "hw";
+ /*
+ nand-on-flash-bbt;
+ */
+ atmel,pmecc-cap = <2>;
+ atmel,sector-size = <512>;
+ status = "okay";
+
+ boot at 0 {
+ label = "bootstrap/uboot/kernel";
+ reg = <0x0 0x400000>;
+ };
+
+ rootfs at 400000 {
+ label = "rootfs";
+ reg = <0x400000 0x3C00000>;
+ };
+
+ data at 4000000 {
+ label = "data";
+ reg = <0x4000000 0xC000000>;
+ };
+ };
+ };
+
+ leds {
+ compatible = "gpio-leds";
+
+ d8 {
+ label = "d8";
+ gpios = <&pioB 4 1>;
+ linux,default-trigger = "mmc0";
+ };
+
+ d9 {
+ label = "d6";
+ gpios = <&pioB 5 1>;
+ linux,default-trigger = "nand-disk";
+ };
+
+ d10 {
+ label = "d7";
+ gpios = <&pioB 6 0>;
+ linux,default-trigger = "heartbeat";
+ };
+ };
+
+ gpio_keys {
+ compatible = "gpio-keys";
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ enter {
+ label = "Enter";
+ gpios = <&pioB 4 1>;
+ linux,code = <28>;
+ gpio-key,wakeup;
+ };
+ };
+};
--
1.7.3.3
^ permalink raw reply related [flat|nested] 14+ messages in thread
* [PATCH 2/4] AT91: Add machine header file for AT91SAM9N12 SoC
2012-04-12 6:26 [PATCH 0/4] Add support for Atmel's AT91SAM9N12-EK (With DT) Hong Xu
2012-04-12 6:26 ` [PATCH 1/4] AT91: Add DT description files for AT91SAM9N12-EK Hong Xu
@ 2012-04-12 6:26 ` Hong Xu
2012-04-13 16:17 ` Nicolas Ferre
2012-04-12 6:26 ` [PATCH 3/4] AT91: Add machine files " Hong Xu
2012-04-12 6:26 ` [PATCH 4/4] Add default kernel configuration file for AT91SAM9N12-EK Hong Xu
3 siblings, 1 reply; 14+ messages in thread
From: Hong Xu @ 2012-04-12 6:26 UTC (permalink / raw)
To: linux-arm-kernel
Signed-off-by: Hong Xu <hong.xu@atmel.com>
---
arch/arm/mach-at91/include/mach/at91sam9n12.h | 68 ++++++++++++++++++++
.../mach-at91/include/mach/at91sam9n12_matrix.h | 53 +++++++++++++++
arch/arm/mach-at91/include/mach/cpu.h | 10 +++
arch/arm/mach-at91/include/mach/hardware.h | 2 +
arch/arm/mach-at91/soc.h | 5 ++
5 files changed, 138 insertions(+), 0 deletions(-)
create mode 100644 arch/arm/mach-at91/include/mach/at91sam9n12.h
create mode 100644 arch/arm/mach-at91/include/mach/at91sam9n12_matrix.h
diff --git a/arch/arm/mach-at91/include/mach/at91sam9n12.h b/arch/arm/mach-at91/include/mach/at91sam9n12.h
new file mode 100644
index 0000000..ff14bbf
--- /dev/null
+++ b/arch/arm/mach-at91/include/mach/at91sam9n12.h
@@ -0,0 +1,68 @@
+/*
+ * SoC specific header file for the AT91SAM9N12
+ *
+ * Copyright (C) 2012 Atmel Corporation
+ *
+ * Common definitions, based on AT91SAM9N12 SoC datasheet
+ *
+ * Licensed under GPLv2 or later
+ */
+
+#ifndef _AT91SAM9N12_H_
+#define _AT91SAM9N12_H_
+
+/*
+ * Peripheral identifiers/interrupts.
+ */
+#define AT91SAM9N12_ID_PIOAB 2 /* Parallel I/O Controller A and B */
+#define AT91SAM9N12_ID_PIOCD 3 /* Parallel I/O Controller C and D */
+#define AT91SAM9N12_ID_FUSE 4 /* FUSE Controller */
+#define AT91SAM9N12_ID_USART0 5 /* USART 0 */
+#define AT91SAM9N12_ID_USART1 6 /* USART 1 */
+#define AT91SAM9N12_ID_USART2 7 /* USART 2 */
+#define AT91SAM9N12_ID_USART3 8 /* USART 3 */
+#define AT91SAM9N12_ID_TWI0 9 /* Two-Wire Interface 0 */
+#define AT91SAM9N12_ID_TWI1 10 /* Two-Wire Interface 1 */
+#define AT91SAM9N12_ID_MCI 12 /* High Speed Multimedia Card Interface */
+#define AT91SAM9N12_ID_SPI0 13 /* Serial Peripheral Interface 0 */
+#define AT91SAM9N12_ID_SPI1 14 /* Serial Peripheral Interface 1 */
+#define AT91SAM9N12_ID_UART0 15 /* UART 0 */
+#define AT91SAM9N12_ID_UART1 16 /* UART 1 */
+#define AT91SAM9N12_ID_TCB 17 /* Timer Counter 0, 1, 2, 3, 4 and 5 */
+#define AT91SAM9N12_ID_PWM 18 /* Pulse Width Modulation Controller */
+#define AT91SAM9N12_ID_ADC 19 /* ADC Controller */
+#define AT91SAM9N12_ID_DMA 20 /* DMA Controller */
+#define AT91SAM9N12_ID_UHP 22 /* USB Host High Speed */
+#define AT91SAM9N12_ID_UDP 23 /* USB Device High Speed */
+#define AT91SAM9N12_ID_LCDC 25 /* LCD Controller */
+#define AT91SAM9N12_ID_ISI 25 /* Image Sensor Interface */
+#define AT91SAM9N12_ID_SSC 28 /* Synchronous Serial Controller */
+#define AT91SAM9N12_ID_TRNG 30 /* TRNG */
+#define AT91SAM9N12_ID_IRQ0 31 /* Advanced Interrupt Controller */
+
+/*
+ * User Peripheral physical base addresses.
+ */
+#define AT91SAM9N12_BASE_USART0 0xf801c000
+#define AT91SAM9N12_BASE_USART1 0xf8020000
+#define AT91SAM9N12_BASE_USART2 0xf8024000
+#define AT91SAM9N12_BASE_USART3 0xf8028000
+
+/*
+ * Base addresses for early serial code (uncompress.h)
+ */
+#define AT91_DBGU AT91_BASE_DBGU0
+#define AT91_USART0 AT91SAM9N12_BASE_USART0
+#define AT91_USART1 AT91SAM9N12_BASE_USART1
+#define AT91_USART2 AT91SAM9N12_BASE_USART2
+
+/*
+ * Internal Memory.
+ */
+#define AT91SAM9N12_SRAM_BASE 0x00300000 /* Internal SRAM base address */
+#define AT91SAM9N12_SRAM_SIZE SZ_32K /* Internal SRAM size (32Kb) */
+
+#define AT91SAM9N12_ROM_BASE 0x00100000 /* Internal ROM base address */
+#define AT91SAM9N12_ROM_SIZE SZ_128K /* Internal ROM size (128Kb) */
+
+#endif
diff --git a/arch/arm/mach-at91/include/mach/at91sam9n12_matrix.h b/arch/arm/mach-at91/include/mach/at91sam9n12_matrix.h
new file mode 100644
index 0000000..40060cd
--- /dev/null
+++ b/arch/arm/mach-at91/include/mach/at91sam9n12_matrix.h
@@ -0,0 +1,53 @@
+/*
+ * Matrix-centric header file for the AT91SAM9N12
+ *
+ * Copyright (C) 2012 Atmel Corporation.
+ *
+ * Only EBI related registers.
+ * Write Protect register definitions may be useful.
+ *
+ * Licensed under GPLv2 or later.
+ */
+
+#ifndef _AT91SAM9N12_MATRIX_H_
+#define _AT91SAM9N12_MATRIX_H_
+
+#define AT91_MATRIX_EBICSA (AT91_MATRIX + 0x118) /* EBI Chip Select Assignment Register */
+#define AT91_MATRIX_EBI_CS1A (1 << 1) /* Chip Select 1 Assignment */
+#define AT91_MATRIX_EBI_CS1A_SMC (0 << 1)
+#define AT91_MATRIX_EBI_CS1A_SDRAMC (1 << 1)
+#define AT91_MATRIX_EBI_CS3A (1 << 3) /* Chip Select 3 Assignment */
+#define AT91_MATRIX_EBI_CS3A_SMC (0 << 3)
+#define AT91_MATRIX_EBI_CS3A_SMC_NANDFLASH (1 << 3)
+#define AT91_MATRIX_EBI_DBPUC (1 << 8) /* Data Bus Pull-up Configuration */
+#define AT91_MATRIX_EBI_DBPU_ON (0 << 8)
+#define AT91_MATRIX_EBI_DBPU_OFF (1 << 8)
+#define AT91_MATRIX_EBI_VDDIOMSEL (1 << 16) /* Memory voltage selection */
+#define AT91_MATRIX_EBI_VDDIOMSEL_1_8V (0 << 16)
+#define AT91_MATRIX_EBI_VDDIOMSEL_3_3V (1 << 16)
+#define AT91_MATRIX_EBI_EBI_IOSR (1 << 17) /* EBI I/O slew rate selection */
+#define AT91_MATRIX_EBI_EBI_IOSR_REDUCED (0 << 17)
+#define AT91_MATRIX_EBI_EBI_IOSR_NORMAL (1 << 17)
+#define AT91_MATRIX_EBI_DDR_IOSR (1 << 18) /* DDR2 dedicated port I/O slew rate selection */
+#define AT91_MATRIX_EBI_DDR_IOSR_REDUCED (0 << 18)
+#define AT91_MATRIX_EBI_DDR_IOSR_NORMAL (1 << 18)
+#define AT91_MATRIX_NFD0_SELECT (1 << 24) /* NAND Flash Data Bus Selection */
+#define AT91_MATRIX_NFD0_ON_D0 (0 << 24)
+#define AT91_MATRIX_NFD0_ON_D16 (1 << 24)
+#define AT91_MATRIX_DDR_MP_EN (1 << 25) /* DDR Multi-port Enable */
+#define AT91_MATRIX_MP_OFF (0 << 25)
+#define AT91_MATRIX_MP_ON (1 << 25)
+
+#define AT91_MATRIX_WPMR (AT91_MATRIX + 0x1E4) /* Write Protect Mode Register */
+#define AT91_MATRIX_WPMR_WPEN (1 << 0) /* Write Protect ENable */
+#define AT91_MATRIX_WPMR_WP_WPDIS (0 << 0)
+#define AT91_MATRIX_WPMR_WP_WPEN (1 << 0)
+#define AT91_MATRIX_WPMR_WPKEY (0xFFFFFF << 8) /* Write Protect KEY */
+
+#define AT91_MATRIX_WPSR (AT91_MATRIX + 0x1E8) /* Write Protect Status Register */
+#define AT91_MATRIX_WPSR_WPVS (1 << 0) /* Write Protect Violation Status */
+#define AT91_MATRIX_WPSR_NO_WPV (0 << 0)
+#define AT91_MATRIX_WPSR_WPV (1 << 0)
+#define AT91_MATRIX_WPSR_WPVSRC (0xFFFF << 8) /* Write Protect Violation Source */
+
+#endif
diff --git a/arch/arm/mach-at91/include/mach/cpu.h b/arch/arm/mach-at91/include/mach/cpu.h
index 0118c33..c7c64e9 100644
--- a/arch/arm/mach-at91/include/mach/cpu.h
+++ b/arch/arm/mach-at91/include/mach/cpu.h
@@ -25,6 +25,7 @@
#define ARCH_ID_AT91SAM9G45MRL 0x819b05a2 /* aka 9G45-ES2 & non ES lots */
#define ARCH_ID_AT91SAM9G45ES 0x819b05a1 /* 9G45-ES (Engineering Sample) */
#define ARCH_ID_AT91SAM9X5 0x819a05a0
+#define ARCH_ID_AT91SAM9N12 0x819a07a0
#define ARCH_ID_AT91SAM9XE128 0x329973a0
#define ARCH_ID_AT91SAM9XE256 0x329a93a0
@@ -70,6 +71,9 @@ enum at91_soc_type {
/* SAM9X5 */
AT91_SOC_SAM9X5,
+ /* SAM9N12 */
+ AT91_SOC_SAM9N12,
+
/* Unknown type */
AT91_SOC_NONE
};
@@ -184,6 +188,12 @@ static inline int at91_soc_is_detected(void)
#define cpu_is_at91sam9x25() (0)
#endif
+#ifdef CONFIG_ARCH_AT91SAM9N12
+#define cpu_is_at91sam9n12() (at91_soc_initdata.type == AT91_SOC_SAM9N12)
+#else
+#define cpu_is_at91sam9n12() (0)
+#endif
+
/*
* Since this is ARM, we will never run on any AVR32 CPU. But these
* definitions may reduce clutter in common drivers.
diff --git a/arch/arm/mach-at91/include/mach/hardware.h b/arch/arm/mach-at91/include/mach/hardware.h
index e9e29a6..39a5654 100644
--- a/arch/arm/mach-at91/include/mach/hardware.h
+++ b/arch/arm/mach-at91/include/mach/hardware.h
@@ -36,6 +36,8 @@
#include <mach/at91sam9g45.h>
#elif defined(CONFIG_ARCH_AT91SAM9X5)
#include <mach/at91sam9x5.h>
+#elif defined(CONFIG_ARCH_AT91SAM9N12)
+#include <mach/at91sam9n12.h>
#elif defined(CONFIG_ARCH_AT91X40)
#include <mach/at91x40.h>
#else
diff --git a/arch/arm/mach-at91/soc.h b/arch/arm/mach-at91/soc.h
index 5db4aa4..0e3fcb8 100644
--- a/arch/arm/mach-at91/soc.h
+++ b/arch/arm/mach-at91/soc.h
@@ -20,6 +20,7 @@ extern struct at91_init_soc at91sam9263_soc;
extern struct at91_init_soc at91sam9g45_soc;
extern struct at91_init_soc at91sam9rl_soc;
extern struct at91_init_soc at91sam9x5_soc;
+extern struct at91_init_soc at91sam9n12_soc;
static inline int at91_soc_is_enabled(void)
{
@@ -53,3 +54,7 @@ static inline int at91_soc_is_enabled(void)
#if !defined(CONFIG_ARCH_AT91SAM9X5)
#define at91sam9x5_soc at91_boot_soc
#endif
+
+#if !defined(CONFIG_ARCH_AT91SAM9N12)
+#define at91sam9n12_soc at91_boot_soc
+#endif
--
1.7.3.3
^ permalink raw reply related [flat|nested] 14+ messages in thread
* [PATCH 3/4] AT91: Add machine files for AT91SAM9N12 SoC
2012-04-12 6:26 [PATCH 0/4] Add support for Atmel's AT91SAM9N12-EK (With DT) Hong Xu
2012-04-12 6:26 ` [PATCH 1/4] AT91: Add DT description files for AT91SAM9N12-EK Hong Xu
2012-04-12 6:26 ` [PATCH 2/4] AT91: Add machine header file for AT91SAM9N12 SoC Hong Xu
@ 2012-04-12 6:26 ` Hong Xu
2012-04-13 16:27 ` Nicolas Ferre
2012-04-12 6:26 ` [PATCH 4/4] Add default kernel configuration file for AT91SAM9N12-EK Hong Xu
3 siblings, 1 reply; 14+ messages in thread
From: Hong Xu @ 2012-04-12 6:26 UTC (permalink / raw)
To: linux-arm-kernel
Signed-off-by: Hong Xu <hong.xu@atmel.com>
---
arch/arm/mach-at91/Kconfig | 9 ++
arch/arm/mach-at91/Makefile | 1 +
arch/arm/mach-at91/at91sam9n12.c | 275 ++++++++++++++++++++++++++++++++++++++
arch/arm/mach-at91/board-dt.c | 1 +
arch/arm/mach-at91/clock.c | 15 ++-
arch/arm/mach-at91/setup.c | 6 +
6 files changed, 302 insertions(+), 5 deletions(-)
create mode 100644 arch/arm/mach-at91/at91sam9n12.c
diff --git a/arch/arm/mach-at91/Kconfig b/arch/arm/mach-at91/Kconfig
index 45db05d..8fc8fb4 100644
--- a/arch/arm/mach-at91/Kconfig
+++ b/arch/arm/mach-at91/Kconfig
@@ -105,6 +105,15 @@ config ARCH_AT91SAM9X5
select HAVE_NET_MACB
select HAVE_AT91_DBGU0
+config ARCH_AT91SAM9N12
+ bool "AT91SAM9N12 SoC"
+ select CPU_ARM926T
+ select GENERIC_CLOCKEVENTS
+ select HAVE_FB_ATMEL
+ select HAVE_AT91_DBGU0
+ help
+ Select this if you are using Atmel's AT91SAM9N12 SoC.
+
config ARCH_AT91X40
bool "AT91x40"
select ARCH_USES_GETTIMEOFFSET
diff --git a/arch/arm/mach-at91/Makefile b/arch/arm/mach-at91/Makefile
index 8512e53..7ab5f5f 100644
--- a/arch/arm/mach-at91/Makefile
+++ b/arch/arm/mach-at91/Makefile
@@ -21,6 +21,7 @@ obj-$(CONFIG_ARCH_AT91SAM9RL) += at91sam9rl.o at91sam926x_time.o at91sam9rl_devi
obj-$(CONFIG_ARCH_AT91SAM9G20) += at91sam9260.o at91sam926x_time.o at91sam9260_devices.o sam9_smc.o
obj-$(CONFIG_ARCH_AT91SAM9G45) += at91sam9g45.o at91sam926x_time.o at91sam9g45_devices.o sam9_smc.o
obj-$(CONFIG_ARCH_AT91SAM9X5) += at91sam9x5.o at91sam926x_time.o sam9_smc.o
+obj-$(CONFIG_ARCH_AT91SAM9N12) += at91sam9n12.o at91sam926x_time.o sam9_smc.o
obj-$(CONFIG_ARCH_AT91X40) += at91x40.o at91x40_time.o
# AT91RM9200 board-specific support
diff --git a/arch/arm/mach-at91/at91sam9n12.c b/arch/arm/mach-at91/at91sam9n12.c
new file mode 100644
index 0000000..5187b95
--- /dev/null
+++ b/arch/arm/mach-at91/at91sam9n12.c
@@ -0,0 +1,275 @@
+/*
+ * SoC specific setup code for the AT91SAM9N12
+ *
+ * Copyright (C) 2012 Atmel Corporation.
+ *
+ * Licensed under GPLv2 or later.
+ */
+
+#include <linux/module.h>
+#include <linux/dma-mapping.h>
+
+#include <asm/irq.h>
+#include <asm/mach/arch.h>
+#include <asm/mach/map.h>
+#include <mach/at91sam9n12.h>
+#include <mach/at91_pmc.h>
+#include <mach/cpu.h>
+#include <mach/board.h>
+
+#include "soc.h"
+#include "generic.h"
+#include "clock.h"
+#include "sam9_smc.h"
+
+/* --------------------------------------------------------------------
+ * Clocks
+ * -------------------------------------------------------------------- */
+
+/*
+ * The peripheral clocks.
+ */
+static struct clk pioAB_clk = {
+ .name = "pioAB_clk",
+ .pmc_mask = 1 << AT91SAM9N12_ID_PIOAB,
+ .type = CLK_TYPE_PERIPHERAL,
+};
+static struct clk pioCD_clk = {
+ .name = "pioCD_clk",
+ .pmc_mask = 1 << AT91SAM9N12_ID_PIOCD,
+ .type = CLK_TYPE_PERIPHERAL,
+};
+static struct clk usart0_clk = {
+ .name = "usart0_clk",
+ .pmc_mask = 1 << AT91SAM9N12_ID_USART0,
+ .type = CLK_TYPE_PERIPHERAL,
+};
+static struct clk usart1_clk = {
+ .name = "usart1_clk",
+ .pmc_mask = 1 << AT91SAM9N12_ID_USART1,
+ .type = CLK_TYPE_PERIPHERAL,
+};
+static struct clk usart2_clk = {
+ .name = "usart2_clk",
+ .pmc_mask = 1 << AT91SAM9N12_ID_USART2,
+ .type = CLK_TYPE_PERIPHERAL,
+};
+static struct clk usart3_clk = {
+ .name = "usart3_clk",
+ .pmc_mask = 1 << AT91SAM9N12_ID_USART3,
+ .type = CLK_TYPE_PERIPHERAL,
+};
+static struct clk twi0_clk = {
+ .name = "twi0_clk",
+ .pmc_mask = 1 << AT91SAM9N12_ID_TWI0,
+ .type = CLK_TYPE_PERIPHERAL,
+};
+static struct clk twi1_clk = {
+ .name = "twi1_clk",
+ .pmc_mask = 1 << AT91SAM9N12_ID_TWI1,
+ .type = CLK_TYPE_PERIPHERAL,
+};
+static struct clk mmc_clk = {
+ .name = "mci_clk",
+ .pmc_mask = 1 << AT91SAM9N12_ID_MCI,
+ .type = CLK_TYPE_PERIPHERAL,
+};
+static struct clk spi0_clk = {
+ .name = "spi0_clk",
+ .pmc_mask = 1 << AT91SAM9N12_ID_SPI0,
+ .type = CLK_TYPE_PERIPHERAL,
+};
+static struct clk spi1_clk = {
+ .name = "spi1_clk",
+ .pmc_mask = 1 << AT91SAM9N12_ID_SPI1,
+ .type = CLK_TYPE_PERIPHERAL,
+};
+static struct clk uart0_clk = {
+ .name = "uart0_clk",
+ .pmc_mask = 1 << AT91SAM9N12_ID_UART0,
+ .type = CLK_TYPE_PERIPHERAL,
+};
+static struct clk uart1_clk = {
+ .name = "uart1_clk",
+ .pmc_mask = 1 << AT91SAM9N12_ID_UART1,
+ .type = CLK_TYPE_PERIPHERAL,
+};
+static struct clk tcb_clk = {
+ .name = "tcb_clk",
+ .pmc_mask = 1 << AT91SAM9N12_ID_TCB,
+ .type = CLK_TYPE_PERIPHERAL,
+};
+static struct clk pwm_clk = {
+ .name = "pwm_clk",
+ .pmc_mask = 1 << AT91SAM9N12_ID_PWM,
+ .type = CLK_TYPE_PERIPHERAL,
+};
+static struct clk adc_clk = {
+ .name = "adc_clk",
+ .pmc_mask = 1 << AT91SAM9N12_ID_ADC,
+ .type = CLK_TYPE_PERIPHERAL,
+};
+static struct clk dma_clk = {
+ .name = "dma_clk",
+ .pmc_mask = 1 << AT91SAM9N12_ID_DMA,
+ .type = CLK_TYPE_PERIPHERAL,
+};
+static struct clk uhp_clk = {
+ .name = "uhp",
+ .pmc_mask = 1 << AT91SAM9N12_ID_UHP,
+ .type = CLK_TYPE_PERIPHERAL,
+};
+static struct clk udp_clk = {
+ .name = "udp_clk",
+ .pmc_mask = 1 << AT91SAM9N12_ID_UDP,
+ .type = CLK_TYPE_PERIPHERAL,
+};
+static struct clk lcdc_clk = {
+ .name = "lcdc_clk",
+ .pmc_mask = 1 << AT91SAM9N12_ID_LCDC,
+ .type = CLK_TYPE_PERIPHERAL,
+};
+static struct clk ssc_clk = {
+ .name = "ssc_clk",
+ .pmc_mask = 1 << AT91SAM9N12_ID_SSC,
+ .type = CLK_TYPE_PERIPHERAL,
+};
+
+static struct clk *periph_clocks[] __initdata = {
+ &pioAB_clk,
+ &pioCD_clk,
+ &usart0_clk,
+ &usart1_clk,
+ &usart2_clk,
+ &usart3_clk,
+ &twi0_clk,
+ &twi1_clk,
+ &mmc_clk,
+ &spi0_clk,
+ &spi1_clk,
+ &lcdc_clk,
+ &uart0_clk,
+ &uart1_clk,
+ &tcb_clk,
+ &pwm_clk,
+ &adc_clk,
+ &dma_clk,
+ &uhp_clk,
+ &udp_clk,
+ &ssc_clk,
+};
+
+static struct clk_lookup periph_clocks_lookups[] = {
+ /* lookup table for DT entries */
+ CLKDEV_CON_DEV_ID("usart", "fffff200.serial", &mck),
+ CLKDEV_CON_DEV_ID("usart", "f801c000.serial", &usart0_clk),
+ CLKDEV_CON_DEV_ID("usart", "f8020000.serial", &usart1_clk),
+ CLKDEV_CON_DEV_ID("usart", "f8024000.serial", &usart2_clk),
+ CLKDEV_CON_DEV_ID("usart", "f8028000.serial", &usart3_clk),
+ CLKDEV_CON_DEV_ID("t0_clk", "f8008000.timer", &tcb_clk),
+ CLKDEV_CON_DEV_ID("t0_clk", "f800c000.timer", &tcb_clk),
+ CLKDEV_CON_DEV_ID("dma_clk", "ffffec00.dma-controller", &dma_clk),
+ CLKDEV_CON_ID("pioA", &pioAB_clk),
+ CLKDEV_CON_ID("pioB", &pioAB_clk),
+ CLKDEV_CON_ID("pioC", &pioCD_clk),
+ CLKDEV_CON_ID("pioD", &pioCD_clk),
+ /* additional fake clock for macb_hclk */
+ CLKDEV_CON_DEV_ID("hclk", "500000.ohci", &uhp_clk),
+ CLKDEV_CON_DEV_ID("ohci_clk", "500000.ohci", &uhp_clk),
+};
+
+/*
+ * The two programmable clocks.
+ * You must configure pin multiplexing to bring these signals out.
+ */
+static struct clk pck0 = {
+ .name = "pck0",
+ .pmc_mask = AT91_PMC_PCK0,
+ .type = CLK_TYPE_PROGRAMMABLE,
+ .id = 0,
+};
+static struct clk pck1 = {
+ .name = "pck1",
+ .pmc_mask = AT91_PMC_PCK1,
+ .type = CLK_TYPE_PROGRAMMABLE,
+ .id = 1,
+};
+
+static void __init at91sam9n12_register_clocks(void)
+{
+ int i;
+
+ for (i = 0; i < ARRAY_SIZE(periph_clocks); i++)
+ clk_register(periph_clocks[i]);
+ clk_register(&pck0);
+ clk_register(&pck1);
+
+ clkdev_add_table(periph_clocks_lookups,
+ ARRAY_SIZE(periph_clocks_lookups));
+
+}
+
+/* --------------------------------------------------------------------
+ * AT91SAM9N12 processor initialization
+ * -------------------------------------------------------------------- */
+
+static void __init at91sam9n12_map_io(void)
+{
+ at91_init_sram(0, AT91SAM9N12_SRAM_BASE, AT91SAM9N12_SRAM_SIZE);
+}
+
+void __init at91sam9n12_initialize(void)
+{
+ at91_extern_irq = (1 << AT91SAM9N12_ID_IRQ0);
+
+ /* Register GPIO subsystem (using DT) */
+ at91_gpio_init(NULL, 0);
+}
+
+/* --------------------------------------------------------------------
+ * Interrupt initialization
+ * -------------------------------------------------------------------- */
+/*
+ * The default interrupt priority levels (0 = lowest, 7 = highest).
+ */
+static unsigned int at91sam9n12_default_irq_priority[NR_AIC_IRQS] __initdata = {
+ 7, /* 00: Advanced Interrupt Controller (FIQ) */
+ 7, /* 01: System Peripherals */
+ 1, /* 02: Parallel IO Controller A and B */
+ 1, /* 03: Parallel IO Controller C and D */
+ 4, /* 04: FUSE Controller */
+ 5, /* 05: USART 0 */
+ 5, /* 06: USART 1 */
+ 5, /* 07: USART 2 */
+ 5, /* 08: USART 3 */
+ 6, /* 09: Two-Wire Interface 0 */
+ 6, /* 10: Two-Wire Interface 1 */
+ 0, /* 11: Reserved */
+ 0, /* 12: Multimedia Card Interface */
+ 5, /* 13: Serial Peripheral Interface 0 */
+ 5, /* 14: Serial Peripheral Interface 1 */
+ 5, /* 15: UART 0 */
+ 5, /* 16: UART 1 */
+ 0, /* 17: Timer Counter 0, 1, 2, 3, 4 and 5 */
+ 0, /* 18: Pulse Width Modulation Controller */
+ 0, /* 19: ADC Controller */
+ 0, /* 20: DMA Controller */
+ 0, /* 21: Reserved */
+ 2, /* 22: USB Host High Speed port */
+ 2, /* 23: USB Device High speed port */
+ 3, /* 24: Reserved */
+ 3, /* 25: LDC Controller or Image Sensor Interface */
+ 0, /* 26: Reserved */
+ 3, /* 27: Reserved */
+ 4, /* 28: Synchronous Serial Controller */
+ 4, /* 29: Reserved */
+ 4, /* 30: TRNG */
+ 0, /* 31: Advanced Interrupt Controller (IRQ0) */
+};
+
+struct at91_init_soc __initdata at91sam9n12_soc = {
+ .map_io = at91sam9n12_map_io,
+ .default_irq_priority = at91sam9n12_default_irq_priority,
+ .register_clocks = at91sam9n12_register_clocks,
+ .init = at91sam9n12_initialize,
+};
diff --git a/arch/arm/mach-at91/board-dt.c b/arch/arm/mach-at91/board-dt.c
index c18d4d3..0a21555 100644
--- a/arch/arm/mach-at91/board-dt.c
+++ b/arch/arm/mach-at91/board-dt.c
@@ -51,6 +51,7 @@ static void __init at91_dt_device_init(void)
static const char *at91_dt_board_compat[] __initdata = {
"atmel,at91sam9m10g45ek",
"atmel,at91sam9x5ek",
+ "atmel,at91sam9n12ek",
"calao,usb-a9g20",
NULL
};
diff --git a/arch/arm/mach-at91/clock.c b/arch/arm/mach-at91/clock.c
index a0f4d74..46130da 100644
--- a/arch/arm/mach-at91/clock.c
+++ b/arch/arm/mach-at91/clock.c
@@ -57,13 +57,15 @@ void __iomem *at91_pmc_base;
#define cpu_has_800M_plla() ( cpu_is_at91sam9g20() \
|| cpu_is_at91sam9g45() \
- || cpu_is_at91sam9x5())
+ || cpu_is_at91sam9x5() \
+ || cpu_is_at91sam9n12())
#define cpu_has_300M_plla() (cpu_is_at91sam9g10())
#define cpu_has_pllb() (!(cpu_is_at91sam9rl() \
|| cpu_is_at91sam9g45() \
- || cpu_is_at91sam9x5()))
+ || cpu_is_at91sam9x5() \
+ || cpu_is_at91sam9n12()))
#define cpu_has_upll() (cpu_is_at91sam9g45() \
|| cpu_is_at91sam9x5())
@@ -77,12 +79,15 @@ void __iomem *at91_pmc_base;
|| cpu_is_at91sam9x5()))
#define cpu_has_plladiv2() (cpu_is_at91sam9g45() \
- || cpu_is_at91sam9x5())
+ || cpu_is_at91sam9x5() \
+ || cpu_is_at91sam9n12())
#define cpu_has_mdiv3() (cpu_is_at91sam9g45() \
- || cpu_is_at91sam9x5())
+ || cpu_is_at91sam9x5() \
+ || cpu_is_at91sam9n12())
-#define cpu_has_alt_prescaler() (cpu_is_at91sam9x5())
+#define cpu_has_alt_prescaler() (cpu_is_at91sam9x5() \
+ || cpu_is_at91sam9n12())
static LIST_HEAD(clocks);
static DEFINE_SPINLOCK(clk_lock);
diff --git a/arch/arm/mach-at91/setup.c b/arch/arm/mach-at91/setup.c
index 97cc04d..34c9c27 100644
--- a/arch/arm/mach-at91/setup.c
+++ b/arch/arm/mach-at91/setup.c
@@ -142,6 +142,11 @@ static void __init soc_detect(u32 dbgu_base)
at91_soc_initdata.type = AT91_SOC_SAM9X5;
at91_boot_soc = at91sam9x5_soc;
break;
+
+ case ARCH_ID_AT91SAM9N12:
+ at91_soc_initdata.type = AT91_SOC_SAM9N12;
+ at91_boot_soc = at91sam9n12_soc;
+ break;
}
/* at91sam9g10 */
@@ -209,6 +214,7 @@ static const char *soc_name[] = {
[AT91_SOC_SAM9G45] = "at91sam9g45",
[AT91_SOC_SAM9RL] = "at91sam9rl",
[AT91_SOC_SAM9X5] = "at91sam9x5",
+ [AT91_SOC_SAM9N12] = "at91sam9n12",
[AT91_SOC_NONE] = "Unknown"
};
--
1.7.3.3
^ permalink raw reply related [flat|nested] 14+ messages in thread
* [PATCH 4/4] Add default kernel configuration file for AT91SAM9N12-EK
2012-04-12 6:26 [PATCH 0/4] Add support for Atmel's AT91SAM9N12-EK (With DT) Hong Xu
` (2 preceding siblings ...)
2012-04-12 6:26 ` [PATCH 3/4] AT91: Add machine files " Hong Xu
@ 2012-04-12 6:26 ` Hong Xu
2012-04-13 16:23 ` Nicolas Ferre
3 siblings, 1 reply; 14+ messages in thread
From: Hong Xu @ 2012-04-12 6:26 UTC (permalink / raw)
To: linux-arm-kernel
Signed-off-by: Hong Xu <hong.xu@atmel.com>
---
arch/arm/configs/at91sam9n12ek_defconfig | 1862 ++++++++++++++++++++++++++++++
1 files changed, 1862 insertions(+), 0 deletions(-)
create mode 100644 arch/arm/configs/at91sam9n12ek_defconfig
diff --git a/arch/arm/configs/at91sam9n12ek_defconfig b/arch/arm/configs/at91sam9n12ek_defconfig
new file mode 100644
index 0000000..3e7edd2
--- /dev/null
+++ b/arch/arm/configs/at91sam9n12ek_defconfig
@@ -0,0 +1,1862 @@
+#
+# Automatically generated make config: don't edit
+# Linux/arm 2.6.39 Kernel Configuration
+# Wed Nov 30 12:32:57 2011
+#
+CONFIG_ARM=y
+CONFIG_SYS_SUPPORTS_APM_EMULATION=y
+CONFIG_GENERIC_GPIO=y
+# CONFIG_ARCH_USES_GETTIMEOFFSET is not set
+CONFIG_GENERIC_CLOCKEVENTS=y
+CONFIG_KTIME_SCALAR=y
+CONFIG_HAVE_PROC_CPU=y
+CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_HAVE_LATENCYTOP_SUPPORT=y
+CONFIG_LOCKDEP_SUPPORT=y
+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
+CONFIG_HARDIRQS_SW_RESEND=y
+CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_RWSEM_GENERIC_SPINLOCK=y
+CONFIG_ARCH_HAS_CPU_IDLE_WAIT=y
+CONFIG_GENERIC_HWEIGHT=y
+CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_NEED_DMA_MAP_STATE=y
+CONFIG_VECTORS_BASE=0xffff0000
+# CONFIG_ARM_PATCH_PHYS_VIRT is not set
+CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+CONFIG_CONSTRUCTORS=y
+CONFIG_HAVE_IRQ_WORK=y
+
+#
+# General setup
+#
+CONFIG_EXPERIMENTAL=y
+CONFIG_BROKEN_ON_SMP=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
+CONFIG_CROSS_COMPILE=""
+CONFIG_LOCALVERSION=""
+# CONFIG_LOCALVERSION_AUTO is not set
+CONFIG_HAVE_KERNEL_GZIP=y
+CONFIG_HAVE_KERNEL_LZMA=y
+CONFIG_HAVE_KERNEL_LZO=y
+CONFIG_KERNEL_GZIP=y
+# CONFIG_KERNEL_LZMA is not set
+# CONFIG_KERNEL_LZO is not set
+# CONFIG_SWAP is not set
+CONFIG_SYSVIPC=y
+CONFIG_SYSVIPC_SYSCTL=y
+CONFIG_POSIX_MQUEUE=y
+CONFIG_POSIX_MQUEUE_SYSCTL=y
+# CONFIG_BSD_PROCESS_ACCT is not set
+# CONFIG_FHANDLE is not set
+# CONFIG_TASKSTATS is not set
+# CONFIG_AUDIT is not set
+CONFIG_HAVE_GENERIC_HARDIRQS=y
+
+#
+# IRQ subsystem
+#
+CONFIG_GENERIC_HARDIRQS=y
+CONFIG_HAVE_SPARSE_IRQ=y
+CONFIG_GENERIC_IRQ_SHOW=y
+# CONFIG_SPARSE_IRQ is not set
+
+#
+# RCU Subsystem
+#
+CONFIG_TINY_RCU=y
+# CONFIG_PREEMPT_RCU is not set
+# CONFIG_RCU_TRACE is not set
+# CONFIG_TREE_RCU_TRACE is not set
+CONFIG_IKCONFIG=y
+CONFIG_IKCONFIG_PROC=y
+CONFIG_LOG_BUF_SHIFT=16
+# CONFIG_CGROUPS is not set
+# CONFIG_NAMESPACES is not set
+# CONFIG_SCHED_AUTOGROUP is not set
+# CONFIG_SYSFS_DEPRECATED is not set
+# CONFIG_RELAY is not set
+CONFIG_BLK_DEV_INITRD=y
+CONFIG_INITRAMFS_SOURCE=""
+CONFIG_RD_GZIP=y
+CONFIG_RD_BZIP2=y
+# CONFIG_RD_LZMA is not set
+# CONFIG_RD_XZ is not set
+# CONFIG_RD_LZO is not set
+CONFIG_CC_OPTIMIZE_FOR_SIZE=y
+CONFIG_SYSCTL=y
+CONFIG_ANON_INODES=y
+CONFIG_EXPERT=y
+CONFIG_UID16=y
+CONFIG_SYSCTL_SYSCALL=y
+CONFIG_KALLSYMS=y
+# CONFIG_KALLSYMS_ALL is not set
+# CONFIG_KALLSYMS_EXTRA_PASS is not set
+CONFIG_HOTPLUG=y
+CONFIG_PRINTK=y
+CONFIG_BUG=y
+CONFIG_ELF_CORE=y
+CONFIG_BASE_FULL=y
+CONFIG_FUTEX=y
+CONFIG_EPOLL=y
+CONFIG_SIGNALFD=y
+CONFIG_TIMERFD=y
+CONFIG_EVENTFD=y
+CONFIG_SHMEM=y
+CONFIG_AIO=y
+CONFIG_EMBEDDED=y
+CONFIG_HAVE_PERF_EVENTS=y
+CONFIG_PERF_USE_VMALLOC=y
+
+#
+# Kernel Performance Events And Counters
+#
+# CONFIG_PERF_EVENTS is not set
+# CONFIG_PERF_COUNTERS is not set
+CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_COMPAT_BRK=y
+CONFIG_SLAB=y
+# CONFIG_SLUB is not set
+# CONFIG_SLOB is not set
+# CONFIG_PROFILING is not set
+CONFIG_HAVE_OPROFILE=y
+# CONFIG_KPROBES is not set
+CONFIG_HAVE_KPROBES=y
+CONFIG_HAVE_KRETPROBES=y
+CONFIG_HAVE_REGS_AND_STACK_ACCESS_API=y
+CONFIG_HAVE_CLK=y
+CONFIG_HAVE_DMA_API_DEBUG=y
+
+#
+# GCOV-based kernel profiling
+#
+# CONFIG_GCOV_KERNEL is not set
+CONFIG_HAVE_GENERIC_DMA_COHERENT=y
+CONFIG_SLABINFO=y
+CONFIG_RT_MUTEXES=y
+CONFIG_BASE_SMALL=0
+CONFIG_MODULES=y
+# CONFIG_MODULE_FORCE_LOAD is not set
+CONFIG_MODULE_UNLOAD=y
+# CONFIG_MODULE_FORCE_UNLOAD is not set
+# CONFIG_MODVERSIONS is not set
+# CONFIG_MODULE_SRCVERSION_ALL is not set
+CONFIG_BLOCK=y
+# CONFIG_LBDAF is not set
+# CONFIG_BLK_DEV_BSG is not set
+# CONFIG_BLK_DEV_INTEGRITY is not set
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+# CONFIG_IOSCHED_DEADLINE is not set
+# CONFIG_IOSCHED_CFQ is not set
+CONFIG_DEFAULT_NOOP=y
+CONFIG_DEFAULT_IOSCHED="noop"
+# CONFIG_INLINE_SPIN_TRYLOCK is not set
+# CONFIG_INLINE_SPIN_TRYLOCK_BH is not set
+# CONFIG_INLINE_SPIN_LOCK is not set
+# CONFIG_INLINE_SPIN_LOCK_BH is not set
+# CONFIG_INLINE_SPIN_LOCK_IRQ is not set
+# CONFIG_INLINE_SPIN_LOCK_IRQSAVE is not set
+CONFIG_INLINE_SPIN_UNLOCK=y
+# CONFIG_INLINE_SPIN_UNLOCK_BH is not set
+CONFIG_INLINE_SPIN_UNLOCK_IRQ=y
+# CONFIG_INLINE_SPIN_UNLOCK_IRQRESTORE is not set
+# CONFIG_INLINE_READ_TRYLOCK is not set
+# CONFIG_INLINE_READ_LOCK is not set
+# CONFIG_INLINE_READ_LOCK_BH is not set
+# CONFIG_INLINE_READ_LOCK_IRQ is not set
+# CONFIG_INLINE_READ_LOCK_IRQSAVE is not set
+CONFIG_INLINE_READ_UNLOCK=y
+# CONFIG_INLINE_READ_UNLOCK_BH is not set
+CONFIG_INLINE_READ_UNLOCK_IRQ=y
+# CONFIG_INLINE_READ_UNLOCK_IRQRESTORE is not set
+# CONFIG_INLINE_WRITE_TRYLOCK is not set
+# CONFIG_INLINE_WRITE_LOCK is not set
+# CONFIG_INLINE_WRITE_LOCK_BH is not set
+# CONFIG_INLINE_WRITE_LOCK_IRQ is not set
+# CONFIG_INLINE_WRITE_LOCK_IRQSAVE is not set
+CONFIG_INLINE_WRITE_UNLOCK=y
+# CONFIG_INLINE_WRITE_UNLOCK_BH is not set
+CONFIG_INLINE_WRITE_UNLOCK_IRQ=y
+# CONFIG_INLINE_WRITE_UNLOCK_IRQRESTORE is not set
+# CONFIG_MUTEX_SPIN_ON_OWNER is not set
+CONFIG_FREEZER=y
+
+#
+# System Type
+#
+CONFIG_MMU=y
+# CONFIG_ARCH_INTEGRATOR is not set
+# CONFIG_ARCH_REALVIEW is not set
+# CONFIG_ARCH_VERSATILE is not set
+# CONFIG_ARCH_VEXPRESS is not set
+CONFIG_ARCH_AT91=y
+# CONFIG_ARCH_BCMRING is not set
+# CONFIG_ARCH_CLPS711X is not set
+# CONFIG_ARCH_CNS3XXX is not set
+# CONFIG_ARCH_GEMINI is not set
+# CONFIG_ARCH_EBSA110 is not set
+# CONFIG_ARCH_EP93XX is not set
+# CONFIG_ARCH_FOOTBRIDGE is not set
+# CONFIG_ARCH_MXC is not set
+# CONFIG_ARCH_MXS is not set
+# CONFIG_ARCH_STMP3XXX is not set
+# CONFIG_ARCH_NETX is not set
+# CONFIG_ARCH_H720X is not set
+# CONFIG_ARCH_IOP13XX is not set
+# CONFIG_ARCH_IOP32X is not set
+# CONFIG_ARCH_IOP33X is not set
+# CONFIG_ARCH_IXP23XX is not set
+# CONFIG_ARCH_IXP2000 is not set
+# CONFIG_ARCH_IXP4XX is not set
+# CONFIG_ARCH_DOVE is not set
+# CONFIG_ARCH_KIRKWOOD is not set
+# CONFIG_ARCH_LOKI is not set
+# CONFIG_ARCH_LPC32XX is not set
+# CONFIG_ARCH_MV78XX0 is not set
+# CONFIG_ARCH_ORION5X is not set
+# CONFIG_ARCH_MMP is not set
+# CONFIG_ARCH_KS8695 is not set
+# CONFIG_ARCH_NS9XXX is not set
+# CONFIG_ARCH_W90X900 is not set
+# CONFIG_ARCH_NUC93X is not set
+# CONFIG_ARCH_TEGRA is not set
+# CONFIG_ARCH_PNX4008 is not set
+# CONFIG_ARCH_PXA is not set
+# CONFIG_ARCH_MSM is not set
+# CONFIG_ARCH_SHMOBILE is not set
+# CONFIG_ARCH_RPC is not set
+# CONFIG_ARCH_SA1100 is not set
+# CONFIG_ARCH_S3C2410 is not set
+# CONFIG_ARCH_S3C64XX is not set
+# CONFIG_ARCH_S5P64X0 is not set
+# CONFIG_ARCH_S5P6442 is not set
+# CONFIG_ARCH_S5PC100 is not set
+# CONFIG_ARCH_S5PV210 is not set
+# CONFIG_ARCH_EXYNOS4 is not set
+# CONFIG_ARCH_SHARK is not set
+# CONFIG_ARCH_TCC_926 is not set
+# CONFIG_ARCH_U300 is not set
+# CONFIG_ARCH_U8500 is not set
+# CONFIG_ARCH_NOMADIK is not set
+# CONFIG_ARCH_DAVINCI is not set
+# CONFIG_ARCH_OMAP is not set
+# CONFIG_PLAT_SPEAR is not set
+# CONFIG_ARCH_VT8500 is not set
+
+#
+# Atmel AT91 System-on-Chip
+#
+# CONFIG_ARCH_AT91RM9200 is not set
+# CONFIG_ARCH_AT91SAM9260 is not set
+# CONFIG_ARCH_AT91SAM9261 is not set
+# CONFIG_ARCH_AT91SAM9G10 is not set
+# CONFIG_ARCH_AT91SAM9263 is not set
+# CONFIG_ARCH_AT91SAM9RL is not set
+# CONFIG_ARCH_AT91SAM9G20 is not set
+# CONFIG_ARCH_AT91SAM9G45 is not set
+# CONFIG_ARCH_AT91SAM9X5 is not set
+CONFIG_ARCH_AT91SAM9N12=y
+# CONFIG_ARCH_AT91CAP9 is not set
+# CONFIG_ARCH_AT572D940HF is not set
+# CONFIG_ARCH_AT91X40 is not set
+CONFIG_AT91_PMC_UNIT=y
+
+#
+# AT91SAM9N12 Board Type
+#
+CONFIG_MACH_AT91SAM9N12EK=y
+
+#
+# AT91 Board Options
+#
+
+#
+# AT91 Feature Selections
+#
+CONFIG_AT91_PROGRAMMABLE_CLOCKS=y
+CONFIG_AT91_SLOW_CLOCK=y
+CONFIG_AT91_TIMER_HZ=100
+CONFIG_AT91_EARLY_DBGU=y
+# CONFIG_AT91_EARLY_USART0 is not set
+# CONFIG_AT91_EARLY_USART1 is not set
+# CONFIG_AT91_EARLY_USART2 is not set
+# CONFIG_GPIO_PCA953X is not set
+# CONFIG_KEYBOARD_GPIO_POLLED is not set
+
+#
+# System MMU
+#
+
+#
+# Processor Type
+#
+CONFIG_CPU_ARM926T=y
+CONFIG_CPU_32v5=y
+CONFIG_CPU_ABRT_EV5TJ=y
+CONFIG_CPU_PABRT_LEGACY=y
+CONFIG_CPU_CACHE_VIVT=y
+CONFIG_CPU_COPY_V4WB=y
+CONFIG_CPU_TLB_V4WBI=y
+CONFIG_CPU_CP15=y
+CONFIG_CPU_CP15_MMU=y
+CONFIG_CPU_USE_DOMAINS=y
+
+#
+# Processor Features
+#
+CONFIG_ARM_THUMB=y
+# CONFIG_CPU_ICACHE_DISABLE is not set
+# CONFIG_CPU_DCACHE_DISABLE is not set
+# CONFIG_CPU_DCACHE_WRITETHROUGH is not set
+# CONFIG_CPU_CACHE_ROUND_ROBIN is not set
+CONFIG_ARM_L1_CACHE_SHIFT=5
+
+#
+# Bus support
+#
+# CONFIG_PCI_SYSCALL is not set
+# CONFIG_ARCH_SUPPORTS_MSI is not set
+# CONFIG_PCCARD is not set
+
+#
+# Kernel Features
+#
+CONFIG_TICK_ONESHOT=y
+# CONFIG_NO_HZ is not set
+CONFIG_HIGH_RES_TIMERS=y
+CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
+CONFIG_VMSPLIT_3G=y
+# CONFIG_VMSPLIT_2G is not set
+# CONFIG_VMSPLIT_1G is not set
+CONFIG_PAGE_OFFSET=0xC0000000
+CONFIG_PREEMPT_NONE=y
+# CONFIG_PREEMPT_VOLUNTARY is not set
+# CONFIG_PREEMPT is not set
+CONFIG_HZ=100
+CONFIG_AEABI=y
+CONFIG_OABI_COMPAT=y
+# CONFIG_ARCH_SPARSEMEM_DEFAULT is not set
+# CONFIG_ARCH_SELECT_MEMORY_MODEL is not set
+# CONFIG_HIGHMEM is not set
+CONFIG_SELECT_MEMORY_MODEL=y
+CONFIG_FLATMEM_MANUAL=y
+CONFIG_FLATMEM=y
+CONFIG_FLAT_NODE_MEM_MAP=y
+CONFIG_HAVE_MEMBLOCK=y
+CONFIG_PAGEFLAGS_EXTENDED=y
+CONFIG_SPLIT_PTLOCK_CPUS=999999
+# CONFIG_COMPACTION is not set
+# CONFIG_PHYS_ADDR_T_64BIT is not set
+CONFIG_ZONE_DMA_FLAG=0
+CONFIG_VIRT_TO_BUS=y
+# CONFIG_KSM is not set
+CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
+CONFIG_NEED_PER_CPU_KM=y
+CONFIG_FORCE_MAX_ZONEORDER=11
+CONFIG_LEDS=y
+CONFIG_LEDS_CPU=y
+CONFIG_ALIGNMENT_TRAP=y
+CONFIG_UACCESS_WITH_MEMCPY=y
+# CONFIG_SECCOMP is not set
+# CONFIG_CC_STACKPROTECTOR is not set
+# CONFIG_DEPRECATED_PARAM_STRUCT is not set
+
+#
+# Boot options
+#
+CONFIG_ZBOOT_ROM_TEXT=0x0
+CONFIG_ZBOOT_ROM_BSS=0x0
+CONFIG_CMDLINE="console=ttyS0,115200 mtdparts=atmel_nand:8M(bootstrap/uboot/kernel)oo,-(rootfs) root=/dev/mtdblock1 rw rootfstype=ubifs ubi.mtd=1 root=ubi0:at91sam9n12ek-rootfs"
+# CONFIG_CMDLINE_FORCE is not set
+# CONFIG_XIP_KERNEL is not set
+# CONFIG_KEXEC is not set
+# CONFIG_CRASH_DUMP is not set
+CONFIG_AUTO_ZRELADDR=y
+
+#
+# CPU Power Management
+#
+# CONFIG_CPU_IDLE is not set
+
+#
+# Floating point emulation
+#
+
+#
+# At least one emulation must be selected
+#
+CONFIG_FPE_NWFPE=y
+# CONFIG_FPE_NWFPE_XP is not set
+# CONFIG_FPE_FASTFPE is not set
+# CONFIG_VFP is not set
+
+#
+# Userspace binary formats
+#
+CONFIG_BINFMT_ELF=y
+# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
+CONFIG_HAVE_AOUT=y
+# CONFIG_BINFMT_AOUT is not set
+# CONFIG_BINFMT_MISC is not set
+
+#
+# Power management options
+#
+CONFIG_SUSPEND=y
+CONFIG_SUSPEND_FREEZER=y
+CONFIG_PM_SLEEP=y
+# CONFIG_PM_RUNTIME is not set
+CONFIG_PM=y
+# CONFIG_PM_DEBUG is not set
+# CONFIG_APM_EMULATION is not set
+CONFIG_ARCH_SUSPEND_POSSIBLE=y
+CONFIG_NET=y
+
+#
+# Networking options
+#
+CONFIG_PACKET=y
+CONFIG_UNIX=y
+# CONFIG_NET_KEY is not set
+CONFIG_INET=y
+CONFIG_IP_MULTICAST=y
+CONFIG_IP_ADVANCED_ROUTER=y
+# CONFIG_IP_FIB_TRIE_STATS is not set
+# CONFIG_IP_MULTIPLE_TABLES is not set
+# CONFIG_IP_ROUTE_MULTIPATH is not set
+# CONFIG_IP_ROUTE_VERBOSE is not set
+CONFIG_IP_PNP=y
+CONFIG_IP_PNP_DHCP=y
+# CONFIG_IP_PNP_BOOTP is not set
+# CONFIG_IP_PNP_RARP is not set
+# CONFIG_NET_IPIP is not set
+# CONFIG_NET_IPGRE_DEMUX is not set
+# CONFIG_IP_MROUTE is not set
+# CONFIG_ARPD is not set
+# CONFIG_SYN_COOKIES is not set
+# CONFIG_INET_AH is not set
+# CONFIG_INET_ESP is not set
+# CONFIG_INET_IPCOMP is not set
+# CONFIG_INET_XFRM_TUNNEL is not set
+# CONFIG_INET_TUNNEL is not set
+# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
+# CONFIG_INET_XFRM_MODE_TUNNEL is not set
+# CONFIG_INET_XFRM_MODE_BEET is not set
+# CONFIG_INET_LRO is not set
+CONFIG_INET_DIAG=y
+CONFIG_INET_TCP_DIAG=y
+# CONFIG_TCP_CONG_ADVANCED is not set
+CONFIG_TCP_CONG_CUBIC=y
+CONFIG_DEFAULT_TCP_CONG="cubic"
+# CONFIG_TCP_MD5SIG is not set
+# CONFIG_IPV6 is not set
+# CONFIG_NETWORK_SECMARK is not set
+# CONFIG_NETWORK_PHY_TIMESTAMPING is not set
+# CONFIG_NETFILTER is not set
+# CONFIG_IP_DCCP is not set
+# CONFIG_IP_SCTP is not set
+# CONFIG_RDS is not set
+# CONFIG_TIPC is not set
+# CONFIG_ATM is not set
+# CONFIG_L2TP is not set
+# CONFIG_BRIDGE is not set
+# CONFIG_NET_DSA is not set
+# CONFIG_VLAN_8021Q is not set
+# CONFIG_DECNET is not set
+# CONFIG_LLC2 is not set
+# CONFIG_IPX is not set
+# CONFIG_ATALK is not set
+# CONFIG_X25 is not set
+# CONFIG_LAPB is not set
+# CONFIG_ECONET is not set
+# CONFIG_WAN_ROUTER is not set
+# CONFIG_PHONET is not set
+# CONFIG_IEEE802154 is not set
+# CONFIG_NET_SCHED is not set
+# CONFIG_DCB is not set
+CONFIG_DNS_RESOLVER=y
+# CONFIG_BATMAN_ADV is not set
+
+#
+# Network testing
+#
+# CONFIG_NET_PKTGEN is not set
+# CONFIG_HAMRADIO is not set
+# CONFIG_CAN is not set
+# CONFIG_IRDA is not set
+# CONFIG_BT is not set
+# CONFIG_AF_RXRPC is not set
+# CONFIG_WIRELESS is not set
+# CONFIG_WIMAX is not set
+# CONFIG_RFKILL is not set
+# CONFIG_NET_9P is not set
+# CONFIG_CAIF is not set
+# CONFIG_CEPH_LIB is not set
+
+#
+# Device Drivers
+#
+
+#
+# Generic Driver Options
+#
+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+# CONFIG_DEVTMPFS is not set
+# CONFIG_STANDALONE is not set
+# CONFIG_PREVENT_FIRMWARE_BUILD is not set
+CONFIG_FW_LOADER=y
+# CONFIG_FIRMWARE_IN_KERNEL is not set
+CONFIG_EXTRA_FIRMWARE=""
+# CONFIG_DEBUG_DRIVER is not set
+# CONFIG_DEBUG_DEVRES is not set
+# CONFIG_SYS_HYPERVISOR is not set
+# CONFIG_CONNECTOR is not set
+CONFIG_MTD=y
+# CONFIG_MTD_DEBUG is not set
+CONFIG_MTD_TESTS=m
+CONFIG_MTD_PARTITIONS=y
+# CONFIG_MTD_REDBOOT_PARTS is not set
+CONFIG_MTD_CMDLINE_PARTS=y
+# CONFIG_MTD_AFS_PARTS is not set
+# CONFIG_MTD_AR7_PARTS is not set
+
+#
+# User Modules And Translation Layers
+#
+CONFIG_MTD_CHAR=y
+CONFIG_MTD_BLKDEVS=y
+CONFIG_MTD_BLOCK=y
+# CONFIG_FTL is not set
+# CONFIG_NFTL is not set
+# CONFIG_INFTL is not set
+# CONFIG_RFD_FTL is not set
+# CONFIG_SSFDC is not set
+# CONFIG_SM_FTL is not set
+# CONFIG_MTD_OOPS is not set
+
+#
+# RAM/ROM/Flash chip drivers
+#
+# CONFIG_MTD_CFI is not set
+# CONFIG_MTD_JEDECPROBE is not set
+CONFIG_MTD_MAP_BANK_WIDTH_1=y
+CONFIG_MTD_MAP_BANK_WIDTH_2=y
+CONFIG_MTD_MAP_BANK_WIDTH_4=y
+# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
+CONFIG_MTD_CFI_I1=y
+CONFIG_MTD_CFI_I2=y
+# CONFIG_MTD_CFI_I4 is not set
+# CONFIG_MTD_CFI_I8 is not set
+# CONFIG_MTD_RAM is not set
+# CONFIG_MTD_ROM is not set
+# CONFIG_MTD_ABSENT is not set
+
+#
+# Mapping drivers for chip access
+#
+# CONFIG_MTD_COMPLEX_MAPPINGS is not set
+# CONFIG_MTD_PLATRAM is not set
+
+#
+# Self-contained MTD device drivers
+#
+# CONFIG_MTD_DATAFLASH is not set
+# CONFIG_MTD_M25P80 is not set
+# CONFIG_MTD_SST25L is not set
+# CONFIG_MTD_SLRAM is not set
+# CONFIG_MTD_PHRAM is not set
+# CONFIG_MTD_MTDRAM is not set
+# CONFIG_MTD_BLOCK2MTD is not set
+
+#
+# Disk-On-Chip Device Drivers
+#
+# CONFIG_MTD_DOC2000 is not set
+# CONFIG_MTD_DOC2001 is not set
+# CONFIG_MTD_DOC2001PLUS is not set
+CONFIG_MTD_NAND_ECC=y
+# CONFIG_MTD_NAND_ECC_SMC is not set
+CONFIG_MTD_NAND=y
+# CONFIG_MTD_NAND_VERIFY_WRITE is not set
+# CONFIG_MTD_NAND_ECC_BCH is not set
+# CONFIG_MTD_SM_COMMON is not set
+# CONFIG_MTD_NAND_MUSEUM_IDS is not set
+# CONFIG_MTD_NAND_GPIO is not set
+CONFIG_MTD_NAND_IDS=y
+# CONFIG_MTD_NAND_DISKONCHIP is not set
+CONFIG_MTD_NAND_ATMEL=y
+CONFIG_MTD_NAND_ATMEL_PMECC_HW=y
+# CONFIG_MTD_NAND_ATMEL_ECC_SOFT is not set
+# CONFIG_MTD_NAND_ATMEL_ECC_NONE is not set
+# CONFIG_MTD_NAND_NANDSIM is not set
+# CONFIG_MTD_NAND_PLATFORM is not set
+# CONFIG_MTD_ALAUDA is not set
+# CONFIG_MTD_ONENAND is not set
+
+#
+# LPDDR flash memory drivers
+#
+# CONFIG_MTD_LPDDR is not set
+CONFIG_MTD_UBI=y
+CONFIG_MTD_UBI_WL_THRESHOLD=4096
+CONFIG_MTD_UBI_BEB_RESERVE=1
+# CONFIG_MTD_UBI_GLUEBI is not set
+# CONFIG_MTD_UBI_DEBUG is not set
+# CONFIG_PARPORT is not set
+CONFIG_BLK_DEV=y
+# CONFIG_BLK_DEV_COW_COMMON is not set
+CONFIG_BLK_DEV_LOOP=y
+# CONFIG_BLK_DEV_CRYPTOLOOP is not set
+
+#
+# DRBD disabled because PROC_FS, INET or CONNECTOR not selected
+#
+# CONFIG_BLK_DEV_NBD is not set
+# CONFIG_BLK_DEV_UB is not set
+CONFIG_BLK_DEV_RAM=y
+CONFIG_BLK_DEV_RAM_COUNT=2
+CONFIG_BLK_DEV_RAM_SIZE=16384
+# CONFIG_BLK_DEV_XIP is not set
+# CONFIG_CDROM_PKTCDVD is not set
+# CONFIG_ATA_OVER_ETH is not set
+# CONFIG_MG_DISK is not set
+# CONFIG_BLK_DEV_RBD is not set
+# CONFIG_SENSORS_LIS3LV02D is not set
+CONFIG_MISC_DEVICES=y
+# CONFIG_AD525X_DPOT is not set
+CONFIG_ATMEL_TCLIB=y
+CONFIG_ATMEL_TCB_CLKSRC=y
+CONFIG_ATMEL_TCB_CLKSRC_BLOCK=0
+CONFIG_ATMEL_TCB_CLKSRC_32BIT=y
+# CONFIG_ICS932S401 is not set
+CONFIG_ATMEL_SSC=y
+# CONFIG_ENCLOSURE_SERVICES is not set
+# CONFIG_APDS9802ALS is not set
+# CONFIG_ISL29003 is not set
+# CONFIG_ISL29020 is not set
+# CONFIG_SENSORS_TSL2550 is not set
+# CONFIG_SENSORS_BH1780 is not set
+# CONFIG_SENSORS_BH1770 is not set
+# CONFIG_SENSORS_APDS990X is not set
+# CONFIG_HMC6352 is not set
+# CONFIG_DS1682 is not set
+# CONFIG_TI_DAC7512 is not set
+# CONFIG_BMP085 is not set
+# CONFIG_C2PORT is not set
+
+#
+# EEPROM support
+#
+# CONFIG_EEPROM_AT24 is not set
+# CONFIG_EEPROM_AT25 is not set
+# CONFIG_EEPROM_LEGACY is not set
+# CONFIG_EEPROM_MAX6875 is not set
+# CONFIG_EEPROM_93CX6 is not set
+# CONFIG_IWMC3200TOP is not set
+
+#
+# Texas Instruments shared transport line discipline
+#
+# CONFIG_SENSORS_LIS3_SPI is not set
+# CONFIG_SENSORS_LIS3_I2C is not set
+CONFIG_HAVE_IDE=y
+# CONFIG_IDE is not set
+
+#
+# SCSI device support
+#
+CONFIG_SCSI_MOD=y
+# CONFIG_RAID_ATTRS is not set
+CONFIG_SCSI=y
+CONFIG_SCSI_DMA=y
+# CONFIG_SCSI_TGT is not set
+# CONFIG_SCSI_NETLINK is not set
+CONFIG_SCSI_PROC_FS=y
+
+#
+# SCSI support type (disk, tape, CD-ROM)
+#
+CONFIG_BLK_DEV_SD=y
+# CONFIG_CHR_DEV_ST is not set
+# CONFIG_CHR_DEV_OSST is not set
+# CONFIG_BLK_DEV_SR is not set
+# CONFIG_CHR_DEV_SG is not set
+# CONFIG_CHR_DEV_SCH is not set
+CONFIG_SCSI_MULTI_LUN=y
+# CONFIG_SCSI_CONSTANTS is not set
+# CONFIG_SCSI_LOGGING is not set
+# CONFIG_SCSI_SCAN_ASYNC is not set
+CONFIG_SCSI_WAIT_SCAN=m
+
+#
+# SCSI Transports
+#
+# CONFIG_SCSI_SPI_ATTRS is not set
+# CONFIG_SCSI_FC_ATTRS is not set
+# CONFIG_SCSI_ISCSI_ATTRS is not set
+# CONFIG_SCSI_SAS_ATTRS is not set
+# CONFIG_SCSI_SAS_LIBSAS is not set
+# CONFIG_SCSI_SRP_ATTRS is not set
+# CONFIG_SCSI_LOWLEVEL is not set
+# CONFIG_SCSI_DH is not set
+# CONFIG_SCSI_OSD_INITIATOR is not set
+# CONFIG_ATA is not set
+# CONFIG_MD is not set
+# CONFIG_TARGET_CORE is not set
+CONFIG_NETDEVICES=y
+# CONFIG_DUMMY is not set
+# CONFIG_BONDING is not set
+# CONFIG_MACVLAN is not set
+# CONFIG_EQUALIZER is not set
+# CONFIG_TUN is not set
+# CONFIG_VETH is not set
+CONFIG_MII=y
+# CONFIG_PHYLIB is not set
+CONFIG_NET_ETHERNET=y
+# CONFIG_AX88796 is not set
+# CONFIG_SMC91X is not set
+# CONFIG_DM9000 is not set
+# CONFIG_ENC28J60 is not set
+# CONFIG_ETHOC is not set
+# CONFIG_SMC911X is not set
+# CONFIG_SMSC911X is not set
+# CONFIG_DNET is not set
+# CONFIG_IBM_NEW_EMAC_ZMII is not set
+# CONFIG_IBM_NEW_EMAC_RGMII is not set
+# CONFIG_IBM_NEW_EMAC_TAH is not set
+# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
+# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
+# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
+# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
+# CONFIG_B44 is not set
+# CONFIG_KS8842 is not set
+# CONFIG_KS8851 is not set
+CONFIG_KS8851_MLL=y
+# CONFIG_FTMAC100 is not set
+# CONFIG_NETDEV_1000 is not set
+# CONFIG_NETDEV_10000 is not set
+# CONFIG_WLAN is not set
+
+#
+# Enable WiMAX (Networking options) to see the WiMAX drivers
+#
+
+#
+# USB Network Adapters
+#
+# CONFIG_USB_CATC is not set
+# CONFIG_USB_KAWETH is not set
+# CONFIG_USB_PEGASUS is not set
+# CONFIG_USB_RTL8150 is not set
+# CONFIG_USB_USBNET is not set
+# CONFIG_USB_IPHETH is not set
+# CONFIG_WAN is not set
+
+#
+# CAIF transport drivers
+#
+# CONFIG_PPP is not set
+# CONFIG_SLIP is not set
+# CONFIG_NETCONSOLE is not set
+# CONFIG_NETPOLL is not set
+# CONFIG_NET_POLL_CONTROLLER is not set
+# CONFIG_ISDN is not set
+# CONFIG_PHONE is not set
+
+#
+# Input device support
+#
+CONFIG_INPUT=y
+# CONFIG_INPUT_FF_MEMLESS is not set
+# CONFIG_INPUT_POLLDEV is not set
+# CONFIG_INPUT_SPARSEKMAP is not set
+
+#
+# Userland interfaces
+#
+CONFIG_INPUT_MOUSEDEV=y
+CONFIG_INPUT_MOUSEDEV_PSAUX=y
+CONFIG_INPUT_MOUSEDEV_SCREEN_X=480
+CONFIG_INPUT_MOUSEDEV_SCREEN_Y=272
+# CONFIG_INPUT_JOYDEV is not set
+CONFIG_INPUT_EVDEV=y
+# CONFIG_INPUT_EVBUG is not set
+
+#
+# Input Device Drivers
+#
+CONFIG_INPUT_KEYBOARD=y
+# CONFIG_KEYBOARD_ADP5588 is not set
+# CONFIG_KEYBOARD_ATKBD is not set
+CONFIG_KEYBOARD_QT1070=y
+# CONFIG_KEYBOARD_QT2160 is not set
+# CONFIG_KEYBOARD_LKKBD is not set
+CONFIG_KEYBOARD_GPIO=y
+# CONFIG_KEYBOARD_TCA6416 is not set
+# CONFIG_KEYBOARD_MATRIX is not set
+# CONFIG_KEYBOARD_LM8323 is not set
+# CONFIG_KEYBOARD_MAX7359 is not set
+# CONFIG_KEYBOARD_MCS is not set
+# CONFIG_KEYBOARD_NEWTON is not set
+# CONFIG_KEYBOARD_OPENCORES is not set
+# CONFIG_KEYBOARD_STOWAWAY is not set
+# CONFIG_KEYBOARD_SUNKBD is not set
+# CONFIG_KEYBOARD_XTKBD is not set
+# CONFIG_INPUT_MOUSE is not set
+# CONFIG_INPUT_JOYSTICK is not set
+# CONFIG_INPUT_TABLET is not set
+CONFIG_INPUT_TOUCHSCREEN=y
+# CONFIG_TOUCHSCREEN_ADS7846 is not set
+# CONFIG_TOUCHSCREEN_AD7877 is not set
+# CONFIG_TOUCHSCREEN_AD7879 is not set
+# CONFIG_TOUCHSCREEN_ATMEL_MXT is not set
+# CONFIG_TOUCHSCREEN_BU21013 is not set
+# CONFIG_TOUCHSCREEN_CY8CTMG110 is not set
+# CONFIG_TOUCHSCREEN_DYNAPRO is not set
+# CONFIG_TOUCHSCREEN_HAMPSHIRE is not set
+# CONFIG_TOUCHSCREEN_EETI is not set
+# CONFIG_TOUCHSCREEN_FUJITSU is not set
+# CONFIG_TOUCHSCREEN_GUNZE is not set
+# CONFIG_TOUCHSCREEN_ELO is not set
+# CONFIG_TOUCHSCREEN_WACOM_W8001 is not set
+# CONFIG_TOUCHSCREEN_MCS5000 is not set
+# CONFIG_TOUCHSCREEN_MTOUCH is not set
+# CONFIG_TOUCHSCREEN_INEXIO is not set
+# CONFIG_TOUCHSCREEN_MK712 is not set
+# CONFIG_TOUCHSCREEN_PENMOUNT is not set
+# CONFIG_TOUCHSCREEN_TOUCHRIGHT is not set
+# CONFIG_TOUCHSCREEN_TOUCHWIN is not set
+CONFIG_TOUCHSCREEN_ATMEL_TSADCC=y
+# CONFIG_TOUCHSCREEN_USB_COMPOSITE is not set
+# CONFIG_TOUCHSCREEN_TOUCHIT213 is not set
+# CONFIG_TOUCHSCREEN_TSC2005 is not set
+# CONFIG_TOUCHSCREEN_TSC2007 is not set
+# CONFIG_TOUCHSCREEN_W90X900 is not set
+# CONFIG_TOUCHSCREEN_ST1232 is not set
+# CONFIG_TOUCHSCREEN_TPS6507X is not set
+# CONFIG_INPUT_MISC is not set
+
+#
+# Hardware I/O ports
+#
+# CONFIG_SERIO is not set
+# CONFIG_GAMEPORT is not set
+
+#
+# Character devices
+#
+CONFIG_VT=y
+CONFIG_CONSOLE_TRANSLATIONS=y
+# CONFIG_VT_CONSOLE is not set
+CONFIG_HW_CONSOLE=y
+# CONFIG_VT_HW_CONSOLE_BINDING is not set
+CONFIG_UNIX98_PTYS=y
+# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
+CONFIG_LEGACY_PTYS=y
+CONFIG_LEGACY_PTY_COUNT=8
+# CONFIG_SERIAL_NONSTANDARD is not set
+# CONFIG_N_GSM is not set
+CONFIG_DEVKMEM=y
+
+#
+# Serial drivers
+#
+# CONFIG_SERIAL_8250 is not set
+
+#
+# Non-8250 serial port support
+#
+CONFIG_SERIAL_ATMEL=y
+CONFIG_SERIAL_ATMEL_CONSOLE=y
+CONFIG_SERIAL_ATMEL_DMA=y
+# CONFIG_SERIAL_ATMEL_TTYAT is not set
+# CONFIG_SERIAL_MAX3100 is not set
+# CONFIG_SERIAL_MAX3107 is not set
+CONFIG_SERIAL_CORE=y
+CONFIG_SERIAL_CORE_CONSOLE=y
+# CONFIG_SERIAL_TIMBERDALE is not set
+# CONFIG_SERIAL_ALTERA_JTAGUART is not set
+# CONFIG_SERIAL_ALTERA_UART is not set
+# CONFIG_SERIAL_IFX6X60 is not set
+# CONFIG_TTY_PRINTK is not set
+# CONFIG_HVC_DCC is not set
+# CONFIG_IPMI_HANDLER is not set
+# CONFIG_HW_RANDOM is not set
+# CONFIG_R3964 is not set
+# CONFIG_RAW_DRIVER is not set
+# CONFIG_TCG_TPM is not set
+# CONFIG_RAMOOPS is not set
+CONFIG_I2C=y
+CONFIG_I2C_BOARDINFO=y
+# CONFIG_I2C_COMPAT is not set
+CONFIG_I2C_CHARDEV=y
+# CONFIG_I2C_MUX is not set
+CONFIG_I2C_HELPER_AUTO=y
+CONFIG_I2C_ALGOBIT=y
+
+#
+# I2C Hardware Bus support
+#
+
+#
+# I2C system bus drivers (mostly embedded / system-on-chip)
+#
+# CONFIG_I2C_DESIGNWARE is not set
+CONFIG_I2C_GPIO=y
+# CONFIG_I2C_OCORES is not set
+# CONFIG_I2C_PCA_PLATFORM is not set
+# CONFIG_I2C_PXA_PCI is not set
+# CONFIG_I2C_SIMTEC is not set
+# CONFIG_I2C_XILINX is not set
+
+#
+# External I2C/SMBus adapter drivers
+#
+# CONFIG_I2C_DIOLAN_U2C is not set
+# CONFIG_I2C_PARPORT_LIGHT is not set
+# CONFIG_I2C_TAOS_EVM is not set
+# CONFIG_I2C_TINY_USB is not set
+
+#
+# Other I2C/SMBus bus drivers
+#
+# CONFIG_I2C_STUB is not set
+# CONFIG_I2C_DEBUG_CORE is not set
+# CONFIG_I2C_DEBUG_ALGO is not set
+# CONFIG_I2C_DEBUG_BUS is not set
+CONFIG_SPI=y
+# CONFIG_SPI_DEBUG is not set
+CONFIG_SPI_MASTER=y
+
+#
+# SPI Master Controller Drivers
+#
+# CONFIG_SPI_ALTERA is not set
+CONFIG_SPI_ATMEL=y
+CONFIG_SPI_ATMEL_DMA=y
+# CONFIG_SPI_BITBANG is not set
+# CONFIG_SPI_GPIO is not set
+# CONFIG_SPI_OC_TINY is not set
+# CONFIG_SPI_PXA2XX_PCI is not set
+# CONFIG_SPI_XILINX is not set
+# CONFIG_SPI_DESIGNWARE is not set
+
+#
+# SPI Protocol Masters
+#
+# CONFIG_SPI_SPIDEV is not set
+# CONFIG_SPI_TLE62X0 is not set
+
+#
+# PPS support
+#
+# CONFIG_PPS is not set
+
+#
+# PPS generators support
+#
+CONFIG_ARCH_REQUIRE_GPIOLIB=y
+CONFIG_GPIOLIB=y
+# CONFIG_DEBUG_GPIO is not set
+CONFIG_GPIO_SYSFS=y
+
+#
+# Memory mapped GPIO expanders:
+#
+# CONFIG_GPIO_BASIC_MMIO is not set
+# CONFIG_GPIO_IT8761E is not set
+
+#
+# I2C GPIO expanders:
+#
+# CONFIG_GPIO_MAX7300 is not set
+# CONFIG_GPIO_MAX732X is not set
+# CONFIG_GPIO_PCF857X is not set
+# CONFIG_GPIO_SX150X is not set
+# CONFIG_GPIO_ADP5588 is not set
+
+#
+# PCI GPIO expanders:
+#
+
+#
+# SPI GPIO expanders:
+#
+# CONFIG_GPIO_MAX7301 is not set
+# CONFIG_GPIO_MCP23S08 is not set
+# CONFIG_GPIO_MC33880 is not set
+# CONFIG_GPIO_74X164 is not set
+
+#
+# AC97 GPIO expanders:
+#
+
+#
+# MODULbus GPIO expanders:
+#
+# CONFIG_W1 is not set
+# CONFIG_POWER_SUPPLY is not set
+# CONFIG_HWMON is not set
+# CONFIG_THERMAL is not set
+# CONFIG_WATCHDOG is not set
+CONFIG_SSB_POSSIBLE=y
+
+#
+# Sonics Silicon Backplane
+#
+# CONFIG_SSB is not set
+# CONFIG_MFD_SUPPORT is not set
+# CONFIG_REGULATOR is not set
+# CONFIG_MEDIA_SUPPORT is not set
+
+#
+# Graphics support
+#
+CONFIG_HAVE_FB_ATMEL=y
+CONFIG_FB_ATMEL_HLCD=y
+# CONFIG_DRM is not set
+# CONFIG_VGASTATE is not set
+# CONFIG_VIDEO_OUTPUT_CONTROL is not set
+CONFIG_FB=y
+# CONFIG_FIRMWARE_EDID is not set
+# CONFIG_FB_DDC is not set
+# CONFIG_FB_BOOT_VESA_SUPPORT is not set
+CONFIG_FB_CFB_FILLRECT=y
+CONFIG_FB_CFB_COPYAREA=y
+CONFIG_FB_CFB_IMAGEBLIT=y
+# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
+# CONFIG_FB_SYS_FILLRECT is not set
+# CONFIG_FB_SYS_COPYAREA is not set
+# CONFIG_FB_SYS_IMAGEBLIT is not set
+# CONFIG_FB_FOREIGN_ENDIAN is not set
+# CONFIG_FB_SYS_FOPS is not set
+# CONFIG_FB_WMT_GE_ROPS is not set
+# CONFIG_FB_SVGALIB is not set
+# CONFIG_FB_MACMODES is not set
+# CONFIG_FB_BACKLIGHT is not set
+# CONFIG_FB_MODE_HELPERS is not set
+# CONFIG_FB_TILEBLITTING is not set
+
+#
+# Frame buffer hardware drivers
+#
+# CONFIG_FB_S1D13XXX is not set
+CONFIG_FB_ATMEL=y
+# CONFIG_FB_UDL is not set
+# CONFIG_FB_VIRTUAL is not set
+# CONFIG_FB_METRONOME is not set
+# CONFIG_FB_MB862XX is not set
+# CONFIG_FB_BROADSHEET is not set
+CONFIG_BACKLIGHT_LCD_SUPPORT=y
+# CONFIG_LCD_CLASS_DEVICE is not set
+CONFIG_BACKLIGHT_CLASS_DEVICE=y
+CONFIG_BACKLIGHT_ATMEL_LCDC=y
+# CONFIG_BACKLIGHT_GENERIC is not set
+# CONFIG_BACKLIGHT_ADP8860 is not set
+
+#
+# Display device support
+#
+# CONFIG_DISPLAY_SUPPORT is not set
+
+#
+# Console display driver support
+#
+CONFIG_DUMMY_CONSOLE=y
+CONFIG_FRAMEBUFFER_CONSOLE=y
+# CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY is not set
+# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set
+CONFIG_FONTS=y
+CONFIG_FONT_8x8=y
+CONFIG_FONT_8x16=y
+# CONFIG_FONT_6x11 is not set
+# CONFIG_FONT_7x14 is not set
+# CONFIG_FONT_PEARL_8x8 is not set
+# CONFIG_FONT_ACORN_8x8 is not set
+# CONFIG_FONT_MINI_4x6 is not set
+# CONFIG_FONT_SUN8x16 is not set
+# CONFIG_FONT_SUN12x22 is not set
+# CONFIG_FONT_10x18 is not set
+CONFIG_LOGO=y
+CONFIG_LOGO_LINUX_MONO=y
+CONFIG_LOGO_LINUX_VGA16=y
+CONFIG_LOGO_LINUX_CLUT224=y
+CONFIG_SOUND=y
+CONFIG_SOUND_OSS_CORE=y
+CONFIG_SOUND_OSS_CORE_PRECLAIM=y
+CONFIG_SND=y
+CONFIG_SND_TIMER=y
+CONFIG_SND_PCM=y
+CONFIG_SND_JACK=y
+CONFIG_SND_SEQUENCER=y
+# CONFIG_SND_SEQ_DUMMY is not set
+CONFIG_SND_OSSEMUL=y
+CONFIG_SND_MIXER_OSS=y
+CONFIG_SND_PCM_OSS=y
+CONFIG_SND_PCM_OSS_PLUGINS=y
+# CONFIG_SND_SEQUENCER_OSS is not set
+# CONFIG_SND_HRTIMER is not set
+# CONFIG_SND_DYNAMIC_MINORS is not set
+# CONFIG_SND_SUPPORT_OLD_API is not set
+# CONFIG_SND_VERBOSE_PROCFS is not set
+# CONFIG_SND_VERBOSE_PRINTK is not set
+# CONFIG_SND_DEBUG is not set
+# CONFIG_SND_RAWMIDI_SEQ is not set
+# CONFIG_SND_OPL3_LIB_SEQ is not set
+# CONFIG_SND_OPL4_LIB_SEQ is not set
+# CONFIG_SND_SBAWE_SEQ is not set
+# CONFIG_SND_EMU10K1_SEQ is not set
+# CONFIG_SND_DRIVERS is not set
+# CONFIG_SND_ARM is not set
+
+#
+# Atmel devices (AVR32 and AT91)
+#
+# CONFIG_SND_ATMEL_AC97C is not set
+# CONFIG_SND_SPI is not set
+# CONFIG_SND_USB is not set
+CONFIG_SND_SOC=y
+# CONFIG_SND_SOC_CACHE_LZO is not set
+CONFIG_SND_ATMEL_SOC=y
+CONFIG_SND_ATMEL_SOC_SSC=y
+CONFIG_SND_AT91_SOC_SAM9N12EK_WM8904=y
+CONFIG_SND_SOC_I2C_AND_SPI=y
+# CONFIG_SND_SOC_ALL_CODECS is not set
+CONFIG_SND_SOC_WM8904=y
+# CONFIG_SOUND_PRIME is not set
+CONFIG_HID_SUPPORT=y
+CONFIG_HID=y
+# CONFIG_HIDRAW is not set
+
+#
+# USB Input Devices
+#
+CONFIG_USB_HID=y
+# CONFIG_HID_PID is not set
+# CONFIG_USB_HIDDEV is not set
+
+#
+# Special HID drivers
+#
+# CONFIG_HID_3M_PCT is not set
+# CONFIG_HID_A4TECH is not set
+# CONFIG_HID_ACRUX is not set
+# CONFIG_HID_APPLE is not set
+# CONFIG_HID_BELKIN is not set
+# CONFIG_HID_CANDO is not set
+# CONFIG_HID_CHERRY is not set
+# CONFIG_HID_CHICONY is not set
+# CONFIG_HID_PRODIKEYS is not set
+# CONFIG_HID_CYPRESS is not set
+# CONFIG_HID_DRAGONRISE is not set
+# CONFIG_HID_EMS_FF is not set
+# CONFIG_HID_EZKEY is not set
+# CONFIG_HID_KEYTOUCH is not set
+# CONFIG_HID_KYE is not set
+# CONFIG_HID_UCLOGIC is not set
+# CONFIG_HID_WALTOP is not set
+# CONFIG_HID_GYRATION is not set
+# CONFIG_HID_TWINHAN is not set
+# CONFIG_HID_KENSINGTON is not set
+# CONFIG_HID_LCPOWER is not set
+# CONFIG_HID_LOGITECH is not set
+# CONFIG_HID_MICROSOFT is not set
+# CONFIG_HID_MOSART is not set
+# CONFIG_HID_MONTEREY is not set
+# CONFIG_HID_MULTITOUCH is not set
+# CONFIG_HID_NTRIG is not set
+# CONFIG_HID_ORTEK is not set
+# CONFIG_HID_PANTHERLORD is not set
+# CONFIG_HID_PETALYNX is not set
+# CONFIG_HID_PICOLCD is not set
+# CONFIG_HID_QUANTA is not set
+# CONFIG_HID_ROCCAT is not set
+# CONFIG_HID_ROCCAT_ARVO is not set
+# CONFIG_HID_ROCCAT_KONE is not set
+# CONFIG_HID_ROCCAT_KONEPLUS is not set
+# CONFIG_HID_ROCCAT_KOVAPLUS is not set
+# CONFIG_HID_ROCCAT_PYRA is not set
+# CONFIG_HID_SAMSUNG is not set
+# CONFIG_HID_SONY is not set
+# CONFIG_HID_STANTUM is not set
+# CONFIG_HID_SUNPLUS is not set
+# CONFIG_HID_GREENASIA is not set
+# CONFIG_HID_SMARTJOYPLUS is not set
+# CONFIG_HID_TOPSEED is not set
+# CONFIG_HID_THRUSTMASTER is not set
+# CONFIG_HID_ZEROPLUS is not set
+# CONFIG_HID_ZYDACRON is not set
+CONFIG_USB_SUPPORT=y
+CONFIG_USB_ARCH_HAS_HCD=y
+CONFIG_USB_ARCH_HAS_OHCI=y
+# CONFIG_USB_ARCH_HAS_EHCI is not set
+CONFIG_USB=y
+# CONFIG_USB_DEBUG is not set
+# CONFIG_USB_ANNOUNCE_NEW_DEVICES is not set
+
+#
+# Miscellaneous USB options
+#
+# CONFIG_USB_DEVICEFS is not set
+# CONFIG_USB_DEVICE_CLASS is not set
+# CONFIG_USB_DYNAMIC_MINORS is not set
+# CONFIG_USB_OTG_WHITELIST is not set
+# CONFIG_USB_OTG_BLACKLIST_HUB is not set
+# CONFIG_USB_MON is not set
+# CONFIG_USB_WUSB is not set
+# CONFIG_USB_WUSB_CBAF is not set
+
+#
+# USB Host Controller Drivers
+#
+# CONFIG_USB_C67X00_HCD is not set
+# CONFIG_USB_OXU210HP_HCD is not set
+# CONFIG_USB_ISP116X_HCD is not set
+# CONFIG_USB_ISP1760_HCD is not set
+# CONFIG_USB_ISP1362_HCD is not set
+CONFIG_USB_OHCI_HCD=y
+# CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set
+# CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set
+CONFIG_USB_OHCI_LITTLE_ENDIAN=y
+# CONFIG_USB_SL811_HCD is not set
+# CONFIG_USB_R8A66597_HCD is not set
+# CONFIG_USB_HWA_HCD is not set
+# CONFIG_USB_MUSB_HDRC is not set
+
+#
+# USB Device Class drivers
+#
+# CONFIG_USB_ACM is not set
+# CONFIG_USB_PRINTER is not set
+# CONFIG_USB_WDM is not set
+# CONFIG_USB_TMC is not set
+
+#
+# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may
+#
+
+#
+# also be needed; see USB_STORAGE Help for more info
+#
+CONFIG_USB_STORAGE=y
+# CONFIG_USB_STORAGE_DEBUG is not set
+# CONFIG_USB_STORAGE_REALTEK is not set
+# CONFIG_USB_STORAGE_DATAFAB is not set
+# CONFIG_USB_STORAGE_FREECOM is not set
+# CONFIG_USB_STORAGE_ISD200 is not set
+# CONFIG_USB_STORAGE_USBAT is not set
+# CONFIG_USB_STORAGE_SDDR09 is not set
+# CONFIG_USB_STORAGE_SDDR55 is not set
+# CONFIG_USB_STORAGE_JUMPSHOT is not set
+# CONFIG_USB_STORAGE_ALAUDA is not set
+# CONFIG_USB_STORAGE_ONETOUCH is not set
+# CONFIG_USB_STORAGE_KARMA is not set
+# CONFIG_USB_STORAGE_CYPRESS_ATACB is not set
+# CONFIG_USB_STORAGE_ENE_UB6250 is not set
+# CONFIG_USB_UAS is not set
+CONFIG_USB_LIBUSUAL=y
+
+#
+# USB Imaging devices
+#
+# CONFIG_USB_MDC800 is not set
+# CONFIG_USB_MICROTEK is not set
+
+#
+# USB port drivers
+#
+# CONFIG_USB_SERIAL is not set
+
+#
+# USB Miscellaneous drivers
+#
+# CONFIG_USB_EMI62 is not set
+# CONFIG_USB_EMI26 is not set
+# CONFIG_USB_ADUTUX is not set
+# CONFIG_USB_SEVSEG is not set
+# CONFIG_USB_RIO500 is not set
+# CONFIG_USB_LEGOTOWER is not set
+# CONFIG_USB_LCD is not set
+# CONFIG_USB_LED is not set
+# CONFIG_USB_CYPRESS_CY7C63 is not set
+# CONFIG_USB_CYTHERM is not set
+# CONFIG_USB_IDMOUSE is not set
+# CONFIG_USB_FTDI_ELAN is not set
+# CONFIG_USB_APPLEDISPLAY is not set
+# CONFIG_USB_LD is not set
+# CONFIG_USB_TRANCEVIBRATOR is not set
+# CONFIG_USB_IOWARRIOR is not set
+# CONFIG_USB_TEST is not set
+# CONFIG_USB_ISIGHTFW is not set
+# CONFIG_USB_YUREX is not set
+CONFIG_USB_GADGET=y
+# CONFIG_USB_GADGET_DEBUG is not set
+# CONFIG_USB_GADGET_DEBUG_FILES is not set
+# CONFIG_USB_GADGET_DEBUG_FS is not set
+CONFIG_USB_GADGET_VBUS_DRAW=2
+CONFIG_USB_GADGET_SELECTED=y
+CONFIG_USB_GADGET_AT91=y
+CONFIG_USB_AT91=y
+# CONFIG_USB_GADGET_FUSB300 is not set
+# CONFIG_USB_GADGET_R8A66597 is not set
+# CONFIG_USB_GADGET_PXA_U2O is not set
+# CONFIG_USB_GADGET_M66592 is not set
+# CONFIG_USB_GADGET_DUMMY_HCD is not set
+# CONFIG_USB_GADGET_DUALSPEED is not set
+CONFIG_USB_ZERO=m
+# CONFIG_USB_AUDIO is not set
+CONFIG_USB_ETH=m
+CONFIG_USB_ETH_RNDIS=y
+# CONFIG_USB_ETH_EEM is not set
+# CONFIG_USB_G_NCM is not set
+# CONFIG_USB_GADGETFS is not set
+# CONFIG_USB_FUNCTIONFS is not set
+CONFIG_USB_FILE_STORAGE=m
+# CONFIG_USB_FILE_STORAGE_TEST is not set
+CONFIG_USB_MASS_STORAGE=m
+CONFIG_USB_G_SERIAL=m
+# CONFIG_USB_MIDI_GADGET is not set
+# CONFIG_USB_G_PRINTER is not set
+CONFIG_USB_CDC_COMPOSITE=m
+CONFIG_USB_G_MULTI=m
+CONFIG_USB_G_MULTI_RNDIS=y
+CONFIG_USB_G_MULTI_CDC=y
+# CONFIG_USB_G_HID is not set
+# CONFIG_USB_G_DBGP is not set
+
+#
+# OTG and related infrastructure
+#
+# CONFIG_USB_GPIO_VBUS is not set
+# CONFIG_USB_ULPI is not set
+# CONFIG_NOP_USB_XCEIV is not set
+CONFIG_MMC=y
+# CONFIG_MMC_DEBUG is not set
+# CONFIG_MMC_UNSAFE_RESUME is not set
+# CONFIG_MMC_CLKGATE is not set
+
+#
+# MMC/SD/SDIO Card Drivers
+#
+CONFIG_MMC_BLOCK=y
+CONFIG_MMC_BLOCK_MINORS=8
+# CONFIG_MMC_BLOCK_BOUNCE is not set
+# CONFIG_SDIO_UART is not set
+# CONFIG_MMC_TEST is not set
+
+#
+# MMC/SD/SDIO Host Controller Drivers
+#
+# CONFIG_MMC_SDHCI is not set
+# CONFIG_MMC_AT91 is not set
+CONFIG_MMC_ATMELMCI=y
+CONFIG_MMC_ATMELMCI_DMA=y
+# CONFIG_MMC_SPI is not set
+# CONFIG_MMC_DW is not set
+# CONFIG_MMC_USHC is not set
+# CONFIG_MEMSTICK is not set
+CONFIG_NEW_LEDS=y
+CONFIG_LEDS_CLASS=y
+
+#
+# LED drivers
+#
+# CONFIG_LEDS_LM3530 is not set
+# CONFIG_LEDS_PCA9532 is not set
+CONFIG_LEDS_GPIO=y
+CONFIG_LEDS_GPIO_PLATFORM=y
+# CONFIG_LEDS_LP3944 is not set
+# CONFIG_LEDS_LP5521 is not set
+# CONFIG_LEDS_LP5523 is not set
+# CONFIG_LEDS_PCA955X is not set
+# CONFIG_LEDS_DAC124S085 is not set
+# CONFIG_LEDS_BD2802 is not set
+# CONFIG_LEDS_LT3593 is not set
+CONFIG_LEDS_TRIGGERS=y
+
+#
+# LED Triggers
+#
+CONFIG_LEDS_TRIGGER_TIMER=y
+CONFIG_LEDS_TRIGGER_HEARTBEAT=y
+# CONFIG_LEDS_TRIGGER_BACKLIGHT is not set
+CONFIG_LEDS_TRIGGER_GPIO=y
+# CONFIG_LEDS_TRIGGER_DEFAULT_ON is not set
+
+#
+# iptables trigger is under Netfilter config (LED target)
+#
+# CONFIG_NFC_DEVICES is not set
+# CONFIG_ACCESSIBILITY is not set
+CONFIG_RTC_LIB=y
+CONFIG_RTC_CLASS=y
+CONFIG_RTC_HCTOSYS=y
+CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
+# CONFIG_RTC_DEBUG is not set
+
+#
+# RTC interfaces
+#
+CONFIG_RTC_INTF_SYSFS=y
+CONFIG_RTC_INTF_PROC=y
+CONFIG_RTC_INTF_DEV=y
+# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
+# CONFIG_RTC_DRV_TEST is not set
+
+#
+# I2C RTC drivers
+#
+# CONFIG_RTC_DRV_DS1307 is not set
+# CONFIG_RTC_DRV_DS1374 is not set
+# CONFIG_RTC_DRV_DS1672 is not set
+# CONFIG_RTC_DRV_DS3232 is not set
+# CONFIG_RTC_DRV_MAX6900 is not set
+# CONFIG_RTC_DRV_RS5C372 is not set
+# CONFIG_RTC_DRV_ISL1208 is not set
+# CONFIG_RTC_DRV_ISL12022 is not set
+# CONFIG_RTC_DRV_X1205 is not set
+# CONFIG_RTC_DRV_PCF8563 is not set
+# CONFIG_RTC_DRV_PCF8583 is not set
+# CONFIG_RTC_DRV_M41T80 is not set
+# CONFIG_RTC_DRV_BQ32K is not set
+# CONFIG_RTC_DRV_S35390A is not set
+# CONFIG_RTC_DRV_FM3130 is not set
+# CONFIG_RTC_DRV_RX8581 is not set
+# CONFIG_RTC_DRV_RX8025 is not set
+
+#
+# SPI RTC drivers
+#
+# CONFIG_RTC_DRV_M41T94 is not set
+# CONFIG_RTC_DRV_DS1305 is not set
+# CONFIG_RTC_DRV_DS1390 is not set
+# CONFIG_RTC_DRV_MAX6902 is not set
+# CONFIG_RTC_DRV_R9701 is not set
+# CONFIG_RTC_DRV_RS5C348 is not set
+# CONFIG_RTC_DRV_DS3234 is not set
+# CONFIG_RTC_DRV_PCF2123 is not set
+
+#
+# Platform RTC drivers
+#
+# CONFIG_RTC_DRV_CMOS is not set
+# CONFIG_RTC_DRV_DS1286 is not set
+# CONFIG_RTC_DRV_DS1511 is not set
+# CONFIG_RTC_DRV_DS1553 is not set
+# CONFIG_RTC_DRV_DS1742 is not set
+# CONFIG_RTC_DRV_STK17TA8 is not set
+# CONFIG_RTC_DRV_M48T86 is not set
+# CONFIG_RTC_DRV_M48T35 is not set
+# CONFIG_RTC_DRV_M48T59 is not set
+# CONFIG_RTC_DRV_MSM6242 is not set
+# CONFIG_RTC_DRV_BQ4802 is not set
+# CONFIG_RTC_DRV_RP5C01 is not set
+# CONFIG_RTC_DRV_V3020 is not set
+
+#
+# on-CPU RTC drivers
+#
+CONFIG_RTC_DRV_AT91RM9200=y
+CONFIG_DMADEVICES=y
+# CONFIG_DMADEVICES_DEBUG is not set
+
+#
+# DMA Devices
+#
+# CONFIG_DW_DMAC is not set
+CONFIG_AT_HDMAC=y
+# CONFIG_TIMB_DMA is not set
+CONFIG_DMA_ENGINE=y
+
+#
+# DMA Clients
+#
+# CONFIG_NET_DMA is not set
+# CONFIG_ASYNC_TX_DMA is not set
+CONFIG_DMATEST=m
+# CONFIG_AUXDISPLAY is not set
+# CONFIG_UIO is not set
+# CONFIG_STAGING is not set
+
+#
+# File systems
+#
+CONFIG_EXT2_FS=y
+# CONFIG_EXT2_FS_XATTR is not set
+# CONFIG_EXT2_FS_XIP is not set
+# CONFIG_EXT3_FS is not set
+# CONFIG_EXT4_FS is not set
+# CONFIG_REISERFS_FS is not set
+# CONFIG_JFS_FS is not set
+# CONFIG_XFS_FS is not set
+# CONFIG_BTRFS_FS is not set
+# CONFIG_NILFS2_FS is not set
+# CONFIG_FS_POSIX_ACL is not set
+CONFIG_FILE_LOCKING=y
+CONFIG_FSNOTIFY=y
+CONFIG_DNOTIFY=y
+CONFIG_INOTIFY_USER=y
+CONFIG_FANOTIFY=y
+# CONFIG_QUOTA is not set
+# CONFIG_QUOTACTL is not set
+# CONFIG_AUTOFS4_FS is not set
+# CONFIG_FUSE_FS is not set
+
+#
+# Caches
+#
+# CONFIG_FSCACHE is not set
+
+#
+# CD-ROM/DVD Filesystems
+#
+# CONFIG_ISO9660_FS is not set
+# CONFIG_UDF_FS is not set
+
+#
+# DOS/FAT/NT Filesystems
+#
+CONFIG_FAT_FS=y
+CONFIG_MSDOS_FS=y
+CONFIG_VFAT_FS=y
+CONFIG_FAT_DEFAULT_CODEPAGE=437
+CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
+# CONFIG_NTFS_FS is not set
+
+#
+# Pseudo filesystems
+#
+CONFIG_PROC_FS=y
+CONFIG_PROC_SYSCTL=y
+CONFIG_PROC_PAGE_MONITOR=y
+CONFIG_SYSFS=y
+CONFIG_TMPFS=y
+# CONFIG_TMPFS_POSIX_ACL is not set
+# CONFIG_HUGETLB_PAGE is not set
+# CONFIG_CONFIGFS_FS is not set
+CONFIG_MISC_FILESYSTEMS=y
+# CONFIG_ADFS_FS is not set
+# CONFIG_AFFS_FS is not set
+# CONFIG_ECRYPT_FS is not set
+# CONFIG_HFS_FS is not set
+# CONFIG_HFSPLUS_FS is not set
+# CONFIG_BEFS_FS is not set
+# CONFIG_BFS_FS is not set
+# CONFIG_EFS_FS is not set
+CONFIG_JFFS2_FS=y
+CONFIG_JFFS2_FS_DEBUG=0
+CONFIG_JFFS2_FS_WRITEBUFFER=y
+# CONFIG_JFFS2_FS_WBUF_VERIFY is not set
+CONFIG_JFFS2_SUMMARY=y
+# CONFIG_JFFS2_FS_XATTR is not set
+# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
+CONFIG_JFFS2_ZLIB=y
+# CONFIG_JFFS2_LZO is not set
+CONFIG_JFFS2_RTIME=y
+# CONFIG_JFFS2_RUBIN is not set
+CONFIG_UBIFS_FS=y
+CONFIG_UBIFS_FS_XATTR=y
+CONFIG_UBIFS_FS_ADVANCED_COMPR=y
+CONFIG_UBIFS_FS_LZO=y
+CONFIG_UBIFS_FS_ZLIB=y
+# CONFIG_UBIFS_FS_DEBUG is not set
+# CONFIG_LOGFS is not set
+CONFIG_CRAMFS=y
+# CONFIG_SQUASHFS is not set
+# CONFIG_VXFS_FS is not set
+# CONFIG_MINIX_FS is not set
+# CONFIG_OMFS_FS is not set
+# CONFIG_HPFS_FS is not set
+# CONFIG_QNX4FS_FS is not set
+# CONFIG_ROMFS_FS is not set
+# CONFIG_PSTORE is not set
+# CONFIG_SYSV_FS is not set
+# CONFIG_UFS_FS is not set
+CONFIG_NETWORK_FILESYSTEMS=y
+CONFIG_NFS_FS=y
+CONFIG_NFS_V3=y
+# CONFIG_NFS_V3_ACL is not set
+# CONFIG_NFS_V4 is not set
+CONFIG_ROOT_NFS=y
+# CONFIG_NFSD is not set
+CONFIG_LOCKD=y
+CONFIG_LOCKD_V4=y
+CONFIG_NFS_COMMON=y
+CONFIG_SUNRPC=y
+# CONFIG_CEPH_FS is not set
+# CONFIG_CIFS is not set
+# CONFIG_NCP_FS is not set
+# CONFIG_CODA_FS is not set
+# CONFIG_AFS_FS is not set
+
+#
+# Partition Types
+#
+# CONFIG_PARTITION_ADVANCED is not set
+CONFIG_MSDOS_PARTITION=y
+CONFIG_NLS=y
+CONFIG_NLS_DEFAULT="iso8859-1"
+CONFIG_NLS_CODEPAGE_437=y
+# CONFIG_NLS_CODEPAGE_737 is not set
+# CONFIG_NLS_CODEPAGE_775 is not set
+CONFIG_NLS_CODEPAGE_850=y
+# CONFIG_NLS_CODEPAGE_852 is not set
+# CONFIG_NLS_CODEPAGE_855 is not set
+# CONFIG_NLS_CODEPAGE_857 is not set
+# CONFIG_NLS_CODEPAGE_860 is not set
+# CONFIG_NLS_CODEPAGE_861 is not set
+# CONFIG_NLS_CODEPAGE_862 is not set
+# CONFIG_NLS_CODEPAGE_863 is not set
+# CONFIG_NLS_CODEPAGE_864 is not set
+# CONFIG_NLS_CODEPAGE_865 is not set
+# CONFIG_NLS_CODEPAGE_866 is not set
+# CONFIG_NLS_CODEPAGE_869 is not set
+# CONFIG_NLS_CODEPAGE_936 is not set
+# CONFIG_NLS_CODEPAGE_950 is not set
+# CONFIG_NLS_CODEPAGE_932 is not set
+# CONFIG_NLS_CODEPAGE_949 is not set
+# CONFIG_NLS_CODEPAGE_874 is not set
+# CONFIG_NLS_ISO8859_8 is not set
+# CONFIG_NLS_CODEPAGE_1250 is not set
+# CONFIG_NLS_CODEPAGE_1251 is not set
+# CONFIG_NLS_ASCII is not set
+CONFIG_NLS_ISO8859_1=y
+# CONFIG_NLS_ISO8859_2 is not set
+# CONFIG_NLS_ISO8859_3 is not set
+# CONFIG_NLS_ISO8859_4 is not set
+# CONFIG_NLS_ISO8859_5 is not set
+# CONFIG_NLS_ISO8859_6 is not set
+# CONFIG_NLS_ISO8859_7 is not set
+# CONFIG_NLS_ISO8859_9 is not set
+# CONFIG_NLS_ISO8859_13 is not set
+# CONFIG_NLS_ISO8859_14 is not set
+CONFIG_NLS_ISO8859_15=y
+# CONFIG_NLS_KOI8_R is not set
+# CONFIG_NLS_KOI8_U is not set
+CONFIG_NLS_UTF8=y
+
+#
+# Kernel hacking
+#
+# CONFIG_PRINTK_TIME is not set
+CONFIG_DEFAULT_MESSAGE_LOGLEVEL=4
+CONFIG_ENABLE_WARN_DEPRECATED=y
+CONFIG_ENABLE_MUST_CHECK=y
+CONFIG_FRAME_WARN=1024
+# CONFIG_MAGIC_SYSRQ is not set
+# CONFIG_STRIP_ASM_SYMS is not set
+# CONFIG_UNUSED_SYMBOLS is not set
+CONFIG_DEBUG_FS=y
+# CONFIG_HEADERS_CHECK is not set
+# CONFIG_DEBUG_SECTION_MISMATCH is not set
+CONFIG_DEBUG_KERNEL=y
+# CONFIG_DEBUG_SHIRQ is not set
+# CONFIG_LOCKUP_DETECTOR is not set
+# CONFIG_HARDLOCKUP_DETECTOR is not set
+# CONFIG_DETECT_HUNG_TASK is not set
+# CONFIG_SCHED_DEBUG is not set
+# CONFIG_SCHEDSTATS is not set
+# CONFIG_TIMER_STATS is not set
+# CONFIG_DEBUG_OBJECTS is not set
+# CONFIG_DEBUG_SLAB is not set
+# CONFIG_DEBUG_KMEMLEAK is not set
+# CONFIG_DEBUG_RT_MUTEXES is not set
+# CONFIG_RT_MUTEX_TESTER is not set
+# CONFIG_DEBUG_SPINLOCK is not set
+# CONFIG_DEBUG_MUTEXES is not set
+# CONFIG_DEBUG_LOCK_ALLOC is not set
+# CONFIG_PROVE_LOCKING is not set
+# CONFIG_SPARSE_RCU_POINTER is not set
+# CONFIG_LOCK_STAT is not set
+# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
+# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
+# CONFIG_DEBUG_KOBJECT is not set
+# CONFIG_DEBUG_BUGVERBOSE is not set
+# CONFIG_DEBUG_INFO is not set
+# CONFIG_DEBUG_VM is not set
+# CONFIG_DEBUG_WRITECOUNT is not set
+# CONFIG_DEBUG_MEMORY_INIT is not set
+# CONFIG_DEBUG_LIST is not set
+# CONFIG_TEST_LIST_SORT is not set
+# CONFIG_DEBUG_SG is not set
+# CONFIG_DEBUG_NOTIFIERS is not set
+# CONFIG_DEBUG_CREDENTIALS is not set
+CONFIG_FRAME_POINTER=y
+# CONFIG_BOOT_PRINTK_DELAY is not set
+# CONFIG_RCU_TORTURE_TEST is not set
+# CONFIG_BACKTRACE_SELF_TEST is not set
+# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
+# CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set
+# CONFIG_LKDTM is not set
+# CONFIG_FAULT_INJECTION is not set
+# CONFIG_LATENCYTOP is not set
+# CONFIG_SYSCTL_SYSCALL_CHECK is not set
+# CONFIG_DEBUG_PAGEALLOC is not set
+CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
+CONFIG_HAVE_DYNAMIC_FTRACE=y
+CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
+CONFIG_HAVE_C_RECORDMCOUNT=y
+CONFIG_TRACING_SUPPORT=y
+# CONFIG_FTRACE is not set
+# CONFIG_DYNAMIC_DEBUG is not set
+# CONFIG_DMA_API_DEBUG is not set
+# CONFIG_ATOMIC64_SELFTEST is not set
+# CONFIG_SAMPLES is not set
+CONFIG_HAVE_ARCH_KGDB=y
+# CONFIG_KGDB is not set
+# CONFIG_TEST_KSTRTOX is not set
+# CONFIG_STRICT_DEVMEM is not set
+# CONFIG_ARM_UNWIND is not set
+# CONFIG_DEBUG_USER is not set
+# CONFIG_DEBUG_STACK_USAGE is not set
+CONFIG_DEBUG_LL=y
+# CONFIG_EARLY_PRINTK is not set
+# CONFIG_DEBUG_ICEDCC is not set
+# CONFIG_OC_ETM is not set
+
+#
+# Security options
+#
+CONFIG_KEYS=y
+# CONFIG_KEYS_DEBUG_PROC_KEYS is not set
+# CONFIG_SECURITY_DMESG_RESTRICT is not set
+# CONFIG_SECURITY is not set
+# CONFIG_SECURITYFS is not set
+CONFIG_DEFAULT_SECURITY_DAC=y
+CONFIG_DEFAULT_SECURITY=""
+CONFIG_CRYPTO=y
+
+#
+# Crypto core or helper
+#
+CONFIG_CRYPTO_ALGAPI=y
+CONFIG_CRYPTO_ALGAPI2=y
+CONFIG_CRYPTO_AEAD2=y
+CONFIG_CRYPTO_BLKCIPHER=y
+CONFIG_CRYPTO_BLKCIPHER2=y
+CONFIG_CRYPTO_HASH=y
+CONFIG_CRYPTO_HASH2=y
+CONFIG_CRYPTO_RNG=m
+CONFIG_CRYPTO_RNG2=y
+CONFIG_CRYPTO_PCOMP2=y
+CONFIG_CRYPTO_MANAGER=y
+CONFIG_CRYPTO_MANAGER2=y
+CONFIG_CRYPTO_MANAGER_DISABLE_TESTS=y
+# CONFIG_CRYPTO_GF128MUL is not set
+# CONFIG_CRYPTO_NULL is not set
+CONFIG_CRYPTO_WORKQUEUE=y
+# CONFIG_CRYPTO_CRYPTD is not set
+# CONFIG_CRYPTO_AUTHENC is not set
+# CONFIG_CRYPTO_TEST is not set
+
+#
+# Authenticated Encryption with Associated Data
+#
+# CONFIG_CRYPTO_CCM is not set
+# CONFIG_CRYPTO_GCM is not set
+# CONFIG_CRYPTO_SEQIV is not set
+
+#
+# Block modes
+#
+CONFIG_CRYPTO_CBC=y
+# CONFIG_CRYPTO_CTR is not set
+# CONFIG_CRYPTO_CTS is not set
+CONFIG_CRYPTO_ECB=y
+# CONFIG_CRYPTO_LRW is not set
+# CONFIG_CRYPTO_PCBC is not set
+# CONFIG_CRYPTO_XTS is not set
+
+#
+# Hash modes
+#
+# CONFIG_CRYPTO_HMAC is not set
+# CONFIG_CRYPTO_XCBC is not set
+# CONFIG_CRYPTO_VMAC is not set
+
+#
+# Digest
+#
+# CONFIG_CRYPTO_CRC32C is not set
+# CONFIG_CRYPTO_GHASH is not set
+# CONFIG_CRYPTO_MD4 is not set
+CONFIG_CRYPTO_MD5=y
+# CONFIG_CRYPTO_MICHAEL_MIC is not set
+# CONFIG_CRYPTO_RMD128 is not set
+# CONFIG_CRYPTO_RMD160 is not set
+# CONFIG_CRYPTO_RMD256 is not set
+# CONFIG_CRYPTO_RMD320 is not set
+# CONFIG_CRYPTO_SHA1 is not set
+# CONFIG_CRYPTO_SHA256 is not set
+# CONFIG_CRYPTO_SHA512 is not set
+# CONFIG_CRYPTO_TGR192 is not set
+# CONFIG_CRYPTO_WP512 is not set
+
+#
+# Ciphers
+#
+CONFIG_CRYPTO_AES=y
+# CONFIG_CRYPTO_ANUBIS is not set
+CONFIG_CRYPTO_ARC4=y
+# CONFIG_CRYPTO_BLOWFISH is not set
+# CONFIG_CRYPTO_CAMELLIA is not set
+# CONFIG_CRYPTO_CAST5 is not set
+# CONFIG_CRYPTO_CAST6 is not set
+CONFIG_CRYPTO_DES=y
+# CONFIG_CRYPTO_FCRYPT is not set
+# CONFIG_CRYPTO_KHAZAD is not set
+# CONFIG_CRYPTO_SALSA20 is not set
+# CONFIG_CRYPTO_SEED is not set
+# CONFIG_CRYPTO_SERPENT is not set
+# CONFIG_CRYPTO_TEA is not set
+# CONFIG_CRYPTO_TWOFISH is not set
+
+#
+# Compression
+#
+CONFIG_CRYPTO_DEFLATE=y
+# CONFIG_CRYPTO_ZLIB is not set
+CONFIG_CRYPTO_LZO=y
+
+#
+# Random Number Generation
+#
+CONFIG_CRYPTO_ANSI_CPRNG=m
+# CONFIG_CRYPTO_USER_API_HASH is not set
+# CONFIG_CRYPTO_USER_API_SKCIPHER is not set
+# CONFIG_CRYPTO_HW is not set
+# CONFIG_BINARY_PRINTF is not set
+
+#
+# Library routines
+#
+CONFIG_BITREVERSE=y
+CONFIG_GENERIC_FIND_LAST_BIT=y
+CONFIG_CRC_CCITT=m
+CONFIG_CRC16=y
+# CONFIG_CRC_T10DIF is not set
+CONFIG_CRC_ITU_T=m
+CONFIG_CRC32=y
+CONFIG_CRC7=m
+# CONFIG_LIBCRC32C is not set
+CONFIG_ZLIB_INFLATE=y
+CONFIG_ZLIB_DEFLATE=y
+CONFIG_LZO_COMPRESS=y
+CONFIG_LZO_DECOMPRESS=y
+# CONFIG_XZ_DEC is not set
+# CONFIG_XZ_DEC_BCJ is not set
+CONFIG_DECOMPRESS_GZIP=y
+CONFIG_DECOMPRESS_BZIP2=y
+CONFIG_HAS_IOMEM=y
+CONFIG_HAS_IOPORT=y
+CONFIG_HAS_DMA=y
+CONFIG_NLATTR=y
+CONFIG_GENERIC_ATOMIC64=y
+CONFIG_AVERAGE=y
--
1.7.3.3
^ permalink raw reply related [flat|nested] 14+ messages in thread
* [PATCH 1/4] AT91: Add DT description files for AT91SAM9N12-EK
2012-04-12 6:26 ` [PATCH 1/4] AT91: Add DT description files for AT91SAM9N12-EK Hong Xu
@ 2012-04-12 7:26 ` Ludovic Desroches
2012-04-16 1:56 ` Xu, Hong
2012-04-13 16:20 ` Nicolas Ferre
1 sibling, 1 reply; 14+ messages in thread
From: Ludovic Desroches @ 2012-04-12 7:26 UTC (permalink / raw)
To: linux-arm-kernel
Hi,
Le 04/12/2012 08:26 AM, Hong Xu a ?crit :
> Added AT91SAM9N12 SoC DT file, as well as the board definition file
> for AT91SAM9N12-EK
>
> Signed-off-by: Hong Xu<hong.xu@atmel.com>
> ---
> arch/arm/boot/dts/at91sam9n12.dtsi | 223
+++++++++++++++++++++++++++++++++++
> arch/arm/boot/dts/at91sam9n12ek.dts | 111 +++++++++++++++++
> 2 files changed, 334 insertions(+), 0 deletions(-)
> create mode 100644 arch/arm/boot/dts/at91sam9n12.dtsi
> create mode 100644 arch/arm/boot/dts/at91sam9n12ek.dts
>
> diff --git a/arch/arm/boot/dts/at91sam9n12.dtsi
b/arch/arm/boot/dts/at91sam9n12.dtsi
> new file mode 100644
> index 0000000..e86372d
> --- /dev/null
> +++ b/arch/arm/boot/dts/at91sam9n12.dtsi
> @@ -0,0 +1,223 @@
> +/*
> + * at91sam9n12.dtsi - Device Tree include file for AT91SAM9N12 SoC
> + *
> + * Copyright (C) 2012 Atmel,
> + * 2012 Hong Xu<hong.xu@atmel.com>
> + *
> + * Licensed under GPLv2 or later.
> + */
> +
> +/include/ "skeleton.dtsi"
> +
> +/ {
> + model = "Atmel AT91SAM9N12 SoC";
> + compatible = "atmel,at91sam9n12";
> + interrupt-parent =<&aic>;
> +
> + aliases {
> + serial0 =&dbgu;
> + serial1 =&usart0;
> + serial2 =&usart1;
> + serial3 =&usart2;
> + serial4 =&usart3;
> + gpio0 =&pioA;
> + gpio1 =&pioB;
> + gpio2 =&pioC;
> + gpio3 =&pioD;
> + tcb0 =&tcb0;
> + tcb1 =&tcb1;
> + };
> + cpus {
> + cpu at 0 {
> + compatible = "arm,arm926ejs";
> + };
> + };
> +
> + memory at 20000000 {
> + reg =<0x20000000 0x10000000>;
> + };
Please remove unit address part. Explanations here:
http://lists-archives.com/linux-kernel/27617260-arm-at91-dt-remove-unit-address-part-for-memory-nodes.html
[...]
> diff --git a/arch/arm/boot/dts/at91sam9n12ek.dts
b/arch/arm/boot/dts/at91sam9n12ek.dts
> new file mode 100644
> index 0000000..56b012f
> --- /dev/null
> +++ b/arch/arm/boot/dts/at91sam9n12ek.dts
> @@ -0,0 +1,111 @@
> +/*
> + * at91sam9n12ek.dts - Device Tree file for AT91SAM9N12-EK board
> + *
> + * Copyright (C) 2012 Atmel,
> + * 2012 Hong Xu<hong.xu@atmel.com>
> + *
> + * Licensed under GPLv2 or later.
> + */
> +/dts-v1/;
> +/include/ "at91sam9n12.dtsi"
> +
> +/ {
> + model = "Atmel AT91SAM9N12-EK";
> + compatible = "atmel,at91sam9n12ek", "atmel,at91sam9n12",
"atmel,at91sam9";
> +
> + chosen {
> + bootargs = "mem=128M console=ttyS0,115200 root=/dev/mtdblock1 rw
rootfstype=jffs2";
> + };
> +
> + memory at 20000000 {
> + reg =<0x20000000 0x10000000>;
> + };
ditto
[...]
Regards
Ludovic
^ permalink raw reply [flat|nested] 14+ messages in thread
* [PATCH 2/4] AT91: Add machine header file for AT91SAM9N12 SoC
2012-04-12 6:26 ` [PATCH 2/4] AT91: Add machine header file for AT91SAM9N12 SoC Hong Xu
@ 2012-04-13 16:17 ` Nicolas Ferre
2012-04-16 2:30 ` Xu, Hong
0 siblings, 1 reply; 14+ messages in thread
From: Nicolas Ferre @ 2012-04-13 16:17 UTC (permalink / raw)
To: linux-arm-kernel
On 04/12/2012 08:26 AM, Hong Xu :
> Signed-off-by: Hong Xu <hong.xu@atmel.com>
> ---
> arch/arm/mach-at91/include/mach/at91sam9n12.h | 68 ++++++++++++++++++++
> .../mach-at91/include/mach/at91sam9n12_matrix.h | 53 +++++++++++++++
> arch/arm/mach-at91/include/mach/cpu.h | 10 +++
> arch/arm/mach-at91/include/mach/hardware.h | 2 +
> arch/arm/mach-at91/soc.h | 5 ++
> 5 files changed, 138 insertions(+), 0 deletions(-)
> create mode 100644 arch/arm/mach-at91/include/mach/at91sam9n12.h
> create mode 100644 arch/arm/mach-at91/include/mach/at91sam9n12_matrix.h
>
> diff --git a/arch/arm/mach-at91/include/mach/at91sam9n12.h b/arch/arm/mach-at91/include/mach/at91sam9n12.h
> new file mode 100644
> index 0000000..ff14bbf
> --- /dev/null
> +++ b/arch/arm/mach-at91/include/mach/at91sam9n12.h
> @@ -0,0 +1,68 @@
> +/*
> + * SoC specific header file for the AT91SAM9N12
> + *
> + * Copyright (C) 2012 Atmel Corporation
> + *
> + * Common definitions, based on AT91SAM9N12 SoC datasheet
> + *
> + * Licensed under GPLv2 or later
> + */
> +
> +#ifndef _AT91SAM9N12_H_
> +#define _AT91SAM9N12_H_
> +
> +/*
> + * Peripheral identifiers/interrupts.
> + */
> +#define AT91SAM9N12_ID_PIOAB 2 /* Parallel I/O Controller A and B */
> +#define AT91SAM9N12_ID_PIOCD 3 /* Parallel I/O Controller C and D */
> +#define AT91SAM9N12_ID_FUSE 4 /* FUSE Controller */
> +#define AT91SAM9N12_ID_USART0 5 /* USART 0 */
> +#define AT91SAM9N12_ID_USART1 6 /* USART 1 */
> +#define AT91SAM9N12_ID_USART2 7 /* USART 2 */
> +#define AT91SAM9N12_ID_USART3 8 /* USART 3 */
> +#define AT91SAM9N12_ID_TWI0 9 /* Two-Wire Interface 0 */
> +#define AT91SAM9N12_ID_TWI1 10 /* Two-Wire Interface 1 */
> +#define AT91SAM9N12_ID_MCI 12 /* High Speed Multimedia Card Interface */
> +#define AT91SAM9N12_ID_SPI0 13 /* Serial Peripheral Interface 0 */
> +#define AT91SAM9N12_ID_SPI1 14 /* Serial Peripheral Interface 1 */
> +#define AT91SAM9N12_ID_UART0 15 /* UART 0 */
> +#define AT91SAM9N12_ID_UART1 16 /* UART 1 */
> +#define AT91SAM9N12_ID_TCB 17 /* Timer Counter 0, 1, 2, 3, 4 and 5 */
> +#define AT91SAM9N12_ID_PWM 18 /* Pulse Width Modulation Controller */
> +#define AT91SAM9N12_ID_ADC 19 /* ADC Controller */
> +#define AT91SAM9N12_ID_DMA 20 /* DMA Controller */
> +#define AT91SAM9N12_ID_UHP 22 /* USB Host High Speed */
> +#define AT91SAM9N12_ID_UDP 23 /* USB Device High Speed */
> +#define AT91SAM9N12_ID_LCDC 25 /* LCD Controller */
> +#define AT91SAM9N12_ID_ISI 25 /* Image Sensor Interface */
> +#define AT91SAM9N12_ID_SSC 28 /* Synchronous Serial Controller */
> +#define AT91SAM9N12_ID_TRNG 30 /* TRNG */
> +#define AT91SAM9N12_ID_IRQ0 31 /* Advanced Interrupt Controller */
> +
> +/*
> + * User Peripheral physical base addresses.
> + */
> +#define AT91SAM9N12_BASE_USART0 0xf801c000
> +#define AT91SAM9N12_BASE_USART1 0xf8020000
> +#define AT91SAM9N12_BASE_USART2 0xf8024000
> +#define AT91SAM9N12_BASE_USART3 0xf8028000
> +
> +/*
> + * Base addresses for early serial code (uncompress.h)
> + */
> +#define AT91_DBGU AT91_BASE_DBGU0
> +#define AT91_USART0 AT91SAM9N12_BASE_USART0
> +#define AT91_USART1 AT91SAM9N12_BASE_USART1
> +#define AT91_USART2 AT91SAM9N12_BASE_USART2
You can remove those defines (about uncompress.h) : they will go away soon.
> +
> +/*
> + * Internal Memory.
> + */
> +#define AT91SAM9N12_SRAM_BASE 0x00300000 /* Internal SRAM base address */
> +#define AT91SAM9N12_SRAM_SIZE SZ_32K /* Internal SRAM size (32Kb) */
> +
> +#define AT91SAM9N12_ROM_BASE 0x00100000 /* Internal ROM base address */
> +#define AT91SAM9N12_ROM_SIZE SZ_128K /* Internal ROM size (128Kb) */
> +
> +#endif
> diff --git a/arch/arm/mach-at91/include/mach/at91sam9n12_matrix.h b/arch/arm/mach-at91/include/mach/at91sam9n12_matrix.h
> new file mode 100644
> index 0000000..40060cd
> --- /dev/null
> +++ b/arch/arm/mach-at91/include/mach/at91sam9n12_matrix.h
> @@ -0,0 +1,53 @@
> +/*
> + * Matrix-centric header file for the AT91SAM9N12
> + *
> + * Copyright (C) 2012 Atmel Corporation.
> + *
> + * Only EBI related registers.
> + * Write Protect register definitions may be useful.
> + *
> + * Licensed under GPLv2 or later.
> + */
> +
> +#ifndef _AT91SAM9N12_MATRIX_H_
> +#define _AT91SAM9N12_MATRIX_H_
> +
> +#define AT91_MATRIX_EBICSA (AT91_MATRIX + 0x118) /* EBI Chip Select Assignment Register */
> +#define AT91_MATRIX_EBI_CS1A (1 << 1) /* Chip Select 1 Assignment */
> +#define AT91_MATRIX_EBI_CS1A_SMC (0 << 1)
> +#define AT91_MATRIX_EBI_CS1A_SDRAMC (1 << 1)
> +#define AT91_MATRIX_EBI_CS3A (1 << 3) /* Chip Select 3 Assignment */
> +#define AT91_MATRIX_EBI_CS3A_SMC (0 << 3)
> +#define AT91_MATRIX_EBI_CS3A_SMC_NANDFLASH (1 << 3)
> +#define AT91_MATRIX_EBI_DBPUC (1 << 8) /* Data Bus Pull-up Configuration */
> +#define AT91_MATRIX_EBI_DBPU_ON (0 << 8)
> +#define AT91_MATRIX_EBI_DBPU_OFF (1 << 8)
> +#define AT91_MATRIX_EBI_VDDIOMSEL (1 << 16) /* Memory voltage selection */
> +#define AT91_MATRIX_EBI_VDDIOMSEL_1_8V (0 << 16)
> +#define AT91_MATRIX_EBI_VDDIOMSEL_3_3V (1 << 16)
> +#define AT91_MATRIX_EBI_EBI_IOSR (1 << 17) /* EBI I/O slew rate selection */
> +#define AT91_MATRIX_EBI_EBI_IOSR_REDUCED (0 << 17)
> +#define AT91_MATRIX_EBI_EBI_IOSR_NORMAL (1 << 17)
> +#define AT91_MATRIX_EBI_DDR_IOSR (1 << 18) /* DDR2 dedicated port I/O slew rate selection */
> +#define AT91_MATRIX_EBI_DDR_IOSR_REDUCED (0 << 18)
> +#define AT91_MATRIX_EBI_DDR_IOSR_NORMAL (1 << 18)
> +#define AT91_MATRIX_NFD0_SELECT (1 << 24) /* NAND Flash Data Bus Selection */
> +#define AT91_MATRIX_NFD0_ON_D0 (0 << 24)
> +#define AT91_MATRIX_NFD0_ON_D16 (1 << 24)
> +#define AT91_MATRIX_DDR_MP_EN (1 << 25) /* DDR Multi-port Enable */
> +#define AT91_MATRIX_MP_OFF (0 << 25)
> +#define AT91_MATRIX_MP_ON (1 << 25)
> +
> +#define AT91_MATRIX_WPMR (AT91_MATRIX + 0x1E4) /* Write Protect Mode Register */
> +#define AT91_MATRIX_WPMR_WPEN (1 << 0) /* Write Protect ENable */
> +#define AT91_MATRIX_WPMR_WP_WPDIS (0 << 0)
> +#define AT91_MATRIX_WPMR_WP_WPEN (1 << 0)
> +#define AT91_MATRIX_WPMR_WPKEY (0xFFFFFF << 8) /* Write Protect KEY */
> +
> +#define AT91_MATRIX_WPSR (AT91_MATRIX + 0x1E8) /* Write Protect Status Register */
> +#define AT91_MATRIX_WPSR_WPVS (1 << 0) /* Write Protect Violation Status */
> +#define AT91_MATRIX_WPSR_NO_WPV (0 << 0)
> +#define AT91_MATRIX_WPSR_WPV (1 << 0)
> +#define AT91_MATRIX_WPSR_WPVSRC (0xFFFF << 8) /* Write Protect Violation Source */
> +
> +#endif
> diff --git a/arch/arm/mach-at91/include/mach/cpu.h b/arch/arm/mach-at91/include/mach/cpu.h
> index 0118c33..c7c64e9 100644
> --- a/arch/arm/mach-at91/include/mach/cpu.h
> +++ b/arch/arm/mach-at91/include/mach/cpu.h
> @@ -25,6 +25,7 @@
> #define ARCH_ID_AT91SAM9G45MRL 0x819b05a2 /* aka 9G45-ES2 & non ES lots */
> #define ARCH_ID_AT91SAM9G45ES 0x819b05a1 /* 9G45-ES (Engineering Sample) */
> #define ARCH_ID_AT91SAM9X5 0x819a05a0
> +#define ARCH_ID_AT91SAM9N12 0x819a07a0
>
> #define ARCH_ID_AT91SAM9XE128 0x329973a0
> #define ARCH_ID_AT91SAM9XE256 0x329a93a0
> @@ -70,6 +71,9 @@ enum at91_soc_type {
> /* SAM9X5 */
> AT91_SOC_SAM9X5,
>
> + /* SAM9N12 */
> + AT91_SOC_SAM9N12,
> +
> /* Unknown type */
> AT91_SOC_NONE
> };
> @@ -184,6 +188,12 @@ static inline int at91_soc_is_detected(void)
> #define cpu_is_at91sam9x25() (0)
> #endif
>
> +#ifdef CONFIG_ARCH_AT91SAM9N12
> +#define cpu_is_at91sam9n12() (at91_soc_initdata.type == AT91_SOC_SAM9N12)
> +#else
> +#define cpu_is_at91sam9n12() (0)
> +#endif
> +
> /*
> * Since this is ARM, we will never run on any AVR32 CPU. But these
> * definitions may reduce clutter in common drivers.
> diff --git a/arch/arm/mach-at91/include/mach/hardware.h b/arch/arm/mach-at91/include/mach/hardware.h
> index e9e29a6..39a5654 100644
> --- a/arch/arm/mach-at91/include/mach/hardware.h
> +++ b/arch/arm/mach-at91/include/mach/hardware.h
> @@ -36,6 +36,8 @@
> #include <mach/at91sam9g45.h>
> #elif defined(CONFIG_ARCH_AT91SAM9X5)
> #include <mach/at91sam9x5.h>
> +#elif defined(CONFIG_ARCH_AT91SAM9N12)
> +#include <mach/at91sam9n12.h>
> #elif defined(CONFIG_ARCH_AT91X40)
> #include <mach/at91x40.h>
> #else
> diff --git a/arch/arm/mach-at91/soc.h b/arch/arm/mach-at91/soc.h
> index 5db4aa4..0e3fcb8 100644
> --- a/arch/arm/mach-at91/soc.h
> +++ b/arch/arm/mach-at91/soc.h
> @@ -20,6 +20,7 @@ extern struct at91_init_soc at91sam9263_soc;
> extern struct at91_init_soc at91sam9g45_soc;
> extern struct at91_init_soc at91sam9rl_soc;
> extern struct at91_init_soc at91sam9x5_soc;
> +extern struct at91_init_soc at91sam9n12_soc;
>
> static inline int at91_soc_is_enabled(void)
> {
> @@ -53,3 +54,7 @@ static inline int at91_soc_is_enabled(void)
> #if !defined(CONFIG_ARCH_AT91SAM9X5)
> #define at91sam9x5_soc at91_boot_soc
> #endif
> +
> +#if !defined(CONFIG_ARCH_AT91SAM9N12)
> +#define at91sam9n12_soc at91_boot_soc
> +#endif
--
Nicolas Ferre
^ permalink raw reply [flat|nested] 14+ messages in thread
* [PATCH 1/4] AT91: Add DT description files for AT91SAM9N12-EK
2012-04-12 6:26 ` [PATCH 1/4] AT91: Add DT description files for AT91SAM9N12-EK Hong Xu
2012-04-12 7:26 ` Ludovic Desroches
@ 2012-04-13 16:20 ` Nicolas Ferre
2012-04-16 2:28 ` Xu, Hong
1 sibling, 1 reply; 14+ messages in thread
From: Nicolas Ferre @ 2012-04-13 16:20 UTC (permalink / raw)
To: linux-arm-kernel
Hi Xu Hong,
Some comments below...
(you may also include devicetree-discuss at lists.ozlabs.org as well)
On 04/12/2012 08:26 AM, Hong Xu :
> Added AT91SAM9N12 SoC DT file, as well as the board definition file
> for AT91SAM9N12-EK
>
> Signed-off-by: Hong Xu <hong.xu@atmel.com>
> ---
> arch/arm/boot/dts/at91sam9n12.dtsi | 223 +++++++++++++++++++++++++++++++++++
> arch/arm/boot/dts/at91sam9n12ek.dts | 111 +++++++++++++++++
> 2 files changed, 334 insertions(+), 0 deletions(-)
> create mode 100644 arch/arm/boot/dts/at91sam9n12.dtsi
> create mode 100644 arch/arm/boot/dts/at91sam9n12ek.dts
>
> diff --git a/arch/arm/boot/dts/at91sam9n12.dtsi b/arch/arm/boot/dts/at91sam9n12.dtsi
> new file mode 100644
> index 0000000..e86372d
> --- /dev/null
> +++ b/arch/arm/boot/dts/at91sam9n12.dtsi
> @@ -0,0 +1,223 @@
> +/*
> + * at91sam9n12.dtsi - Device Tree include file for AT91SAM9N12 SoC
> + *
> + * Copyright (C) 2012 Atmel,
> + * 2012 Hong Xu <hong.xu@atmel.com>
> + *
> + * Licensed under GPLv2 or later.
> + */
> +
> +/include/ "skeleton.dtsi"
> +
> +/ {
> + model = "Atmel AT91SAM9N12 SoC";
> + compatible = "atmel,at91sam9n12";
> + interrupt-parent = <&aic>;
> +
> + aliases {
> + serial0 = &dbgu;
> + serial1 = &usart0;
> + serial2 = &usart1;
> + serial3 = &usart2;
> + serial4 = &usart3;
> + gpio0 = &pioA;
> + gpio1 = &pioB;
> + gpio2 = &pioC;
> + gpio3 = &pioD;
> + tcb0 = &tcb0;
> + tcb1 = &tcb1;
> + };
> + cpus {
> + cpu at 0 {
> + compatible = "arm,arm926ejs";
> + };
> + };
> +
> + memory at 20000000 {
> + reg = <0x20000000 0x10000000>;
> + };
> +
> + ahb {
> + compatible = "simple-bus";
> + #address-cells = <1>;
> + #size-cells = <1>;
> + ranges;
> +
> + apb {
> + compatible = "simple-bus";
> + #address-cells = <1>;
> + #size-cells = <1>;
> + ranges;
> +
> + aic: interrupt-controller at fffff000 {
> + #interrupt-cells = <2>;
> + compatible = "atmel,at91rm9200-aic";
> + interrupt-controller;
> + interrupt-parent;
> + reg = <0xfffff000 0x200>;
> + };
> +
> + ramc0: ramc at ffffe800 {
> + compatible = "atmel,at91sam9g45-ddramc";
> + reg = <0xffffe800 0x200>;
> + };
> +
> + pmc: pmc at fffffc00 {
> + compatible = "atmel,at91rm9200-pmc";
> + reg = <0xfffffc00 0x100>;
> + };
> +
> + rstc at fffffe00 {
> + compatible = "atmel,at91sam9g45-rstc";
> + reg = <0xfffffe00 0x10>;
> + };
> +
> + pit: timer at fffffe30 {
> + compatible = "atmel,at91sam9260-pit";
> + reg = <0xfffffe30 0xf>;
> + interrupts = <1 4>;
> + };
> +
> +
> + shdwc at fffffe10 {
> + compatible = "atmel,at91sam9n12-shdwc";
I think that shdwc is compatible with "atmel,at91sam9x5-shdwc", is not it?
> + reg = <0xfffffe10 0x10>;
> + };
> +
> + tcb0: timer at f8008000 {
> + compatible = "atmel,at91sam9n12-tcb";
Here also, I suspect a compatibility with: "atmel,at91sam9x5-tcb"
> + reg = <0xf8008000 0x100>;
> + interrupts = <17 4>;
> + };
> +
> + tcb1: timer at f800c000 {
> + compatible = "atmel,at91sam9n12-tcb";
Ditto.
> + reg = <0xf800c000 0x100>;
> + interrupts = <17 4>;
> + };
> +
> + dma: dma-controller at ffffec00 {
> + compatible = "atmel,at91sam9g45-dma";
> + reg = <0xffffec00 0x200>;
> + interrupts = <20 4>;
> + };
> +
> + pioA: gpio at fffff400 {
> + compatible = "atmel,at91sam9x5-gpio", "atmel,at91rm9200-gpio";
> + reg = <0xfffff400 0x100>;
> + interrupts = <2 4>;
> + #gpio-cells = <2>;
> + gpio-controller;
> + interrupt-controller;
> + };
> +
> + pioB: gpio at fffff600 {
> + compatible = "atmel,at91sam9x5-gpio", "atmel,at91rm9200-gpio";
> + reg = <0xfffff600 0x100>;
> + interrupts = <2 4>;
> + #gpio-cells = <2>;
> + gpio-controller;
> + interrupt-controller;
> + };
> +
> + pioC: gpio at fffff800 {
> + compatible = "atmel,at91sam9x5-gpio", "atmel,at91rm9200-gpio";
> + reg = <0xfffff800 0x100>;
> + interrupts = <3 4>;
> + #gpio-cells = <2>;
> + gpio-controller;
> + interrupt-controller;
> + };
> +
> + pioD: gpio at fffffa00 {
> + compatible = "atmel,at91sam9x5-gpio", "atmel,at91rm9200-gpio";
> + reg = <0xfffffa00 0x100>;
> + interrupts = <3 4>;
> + #gpio-cells = <2>;
> + gpio-controller;
> + interrupt-controller;
> + };
> +
> + dbgu: serial at fffff200 {
> + compatible = "atmel,at91sam9260-usart";
> + reg = <0xfffff200 0x200>;
> + interrupts = <1 4>;
> + status = "disabled";
> + };
> +
> + usart0: serial at f801c000 {
> + compatible = "atmel,at91sam9260-usart";
> + reg = <0xf801c000 0x4000>;
> + interrupts = <5 4>;
> + atmel,use-dma-rx;
> + atmel,use-dma-tx;
> + status = "disabled";
> + };
> +
> + usart1: serial at f8020000 {
> + compatible = "atmel,at91sam9260-usart";
> + reg = <0xf8020000 0x4000>;
> + interrupts = <6 4>;
> + atmel,use-dma-rx;
> + atmel,use-dma-tx;
> + status = "disabled";
> + };
> +
> + usart2: serial at f8024000 {
> + compatible = "atmel,at91sam9260-usart";
> + reg = <0xf8024000 0x4000>;
> + interrupts = <7 4>;
> + atmel,use-dma-rx;
> + atmel,use-dma-tx;
> + status = "disabled";
> + };
> +
> + usart3: serial at f8028000 {
> + compatible = "atmel,at91sam9260-usart";
> + reg = <0xf8028000 0x4000>;
> + interrupts = <8 4>;
> + atmel,use-dma-rx;
> + atmel,use-dma-tx;
> + status = "disabled";
> + };
> + };
> +
> + nand0: nand at 40000000 {
> + compatible = "atmel,at91rm9200-nand";
> + #address-cells = <1>;
> + #size-cells = <1>;
> + reg = < 0x40000000 0x10000000
> + 0xffffe000 0x00000600
> + 0xffffe600 0x00000200
> + 0x00100000 0x00100000
> + >;
> + atmel,nand-addr-offset = <21>;
> + atmel,nand-cmd-offset = <22>;
> + gpios = <&pioD 5 0
> + &pioD 4 0
> + 0
> + >;
> + status = "disabled";
> + };
> +
> + usb0: ohci at 00500000 {
> + compatible = "atmel,at91rm9200-ohci", "usb-ohci";
> + reg = <0x00500000 0x00100000>;
> + interrupts = <22 4>;
> + status = "disabled";
> + };
> + };
> +
> + i2c at 0 {
> + compatible = "i2c-gpio";
> + gpios = <&pioA 30 0 /* sda */
> + &pioA 31 0 /* scl */
> + >;
> + i2c-gpio,sda-open-drain;
> + i2c-gpio,scl-open-drain;
> + i2c-gpio,delay-us = <2>; /* ~100 kHz */
> + #address-cells = <1>;
> + #size-cells = <0>;
> + status = "disabled";
> + };
> +};
> diff --git a/arch/arm/boot/dts/at91sam9n12ek.dts b/arch/arm/boot/dts/at91sam9n12ek.dts
> new file mode 100644
> index 0000000..56b012f
> --- /dev/null
> +++ b/arch/arm/boot/dts/at91sam9n12ek.dts
> @@ -0,0 +1,111 @@
> +/*
> + * at91sam9n12ek.dts - Device Tree file for AT91SAM9N12-EK board
> + *
> + * Copyright (C) 2012 Atmel,
> + * 2012 Hong Xu <hong.xu@atmel.com>
> + *
> + * Licensed under GPLv2 or later.
> + */
> +/dts-v1/;
> +/include/ "at91sam9n12.dtsi"
> +
> +/ {
> + model = "Atmel AT91SAM9N12-EK";
> + compatible = "atmel,at91sam9n12ek", "atmel,at91sam9n12", "atmel,at91sam9";
> +
> + chosen {
> + bootargs = "mem=128M console=ttyS0,115200 root=/dev/mtdblock1 rw rootfstype=jffs2";
> + };
> +
> + memory at 20000000 {
> + reg = <0x20000000 0x10000000>;
> + };
> +
> + clocks {
> + #address-cells = <1>;
> + #size-cells = <1>;
> + ranges;
> +
> + main_clock: clock at 0 {
> + compatible = "atmel,osc", "fixed-clock";
> + clock-frequency = <16000000>;
> + };
> + };
> +
> + ahb {
> + apb {
> + dbgu: serial at fffff200 {
> + status = "okay";
> + };
> +
> + tcb0: timer at f8008000 {
> + status = "okay";
No need for this node, tcb0 is already enabled.
> + };
> +
> + tcb1: timer at f800c000 {
> + status = "okay";
Ditto.
> + };
> + };
> +
> + nand0: nand at 40000000 {
> + nand-bus-width = <8>;
> + nand-ecc-mode = "hw";
No, HW PMECC code is not included in mainline yet. You should submit
9n12 with sw ECC for the moment. We will change this argument afterwards.
> + /*
> + nand-on-flash-bbt;
> + */
You can keep this one, or remove it completely.
> + atmel,pmecc-cap = <2>;
> + atmel,sector-size = <512>;
Later for those PMECC related bindings. You can submit them with the
PMECC series BTW.
> + status = "okay";
> +
> + boot at 0 {
> + label = "bootstrap/uboot/kernel";
> + reg = <0x0 0x400000>;
> + };
> +
> + rootfs at 400000 {
> + label = "rootfs";
> + reg = <0x400000 0x3C00000>;
> + };
> +
> + data at 4000000 {
> + label = "data";
> + reg = <0x4000000 0xC000000>;
> + };
> + };
> + };
> +
> + leds {
> + compatible = "gpio-leds";
> +
> + d8 {
> + label = "d8";
> + gpios = <&pioB 4 1>;
> + linux,default-trigger = "mmc0";
> + };
> +
> + d9 {
> + label = "d6";
> + gpios = <&pioB 5 1>;
> + linux,default-trigger = "nand-disk";
> + };
> +
> + d10 {
> + label = "d7";
> + gpios = <&pioB 6 0>;
> + linux,default-trigger = "heartbeat";
> + };
> + };
> +
> + gpio_keys {
> + compatible = "gpio-keys";
> + #address-cells = <1>;
> + #size-cells = <0>;
> +
> + enter {
> + label = "Enter";
> + gpios = <&pioB 4 1>;
> + linux,code = <28>;
> + gpio-key,wakeup;
> + };
> + };
> +};
Bye,
--
Nicolas Ferre
^ permalink raw reply [flat|nested] 14+ messages in thread
* [PATCH 4/4] Add default kernel configuration file for AT91SAM9N12-EK
2012-04-12 6:26 ` [PATCH 4/4] Add default kernel configuration file for AT91SAM9N12-EK Hong Xu
@ 2012-04-13 16:23 ` Nicolas Ferre
0 siblings, 0 replies; 14+ messages in thread
From: Nicolas Ferre @ 2012-04-13 16:23 UTC (permalink / raw)
To: linux-arm-kernel
Hi,
This one is not needed: we will try to include 9n12 to common DT AT91
defconfig file.
(Hint: defconfig files are now generated by make savedefconfig target)
Cheers,
On 04/12/2012 08:26 AM, Hong Xu :
> Signed-off-by: Hong Xu <hong.xu@atmel.com>
> ---
> arch/arm/configs/at91sam9n12ek_defconfig | 1862 ++++++++++++++++++++++++++++++
> 1 files changed, 1862 insertions(+), 0 deletions(-)
> create mode 100644 arch/arm/configs/at91sam9n12ek_defconfig
>
> diff --git a/arch/arm/configs/at91sam9n12ek_defconfig b/arch/arm/configs/at91sam9n12ek_defconfig
> new file mode 100644
> index 0000000..3e7edd2
> --- /dev/null
> +++ b/arch/arm/configs/at91sam9n12ek_defconfig
> @@ -0,0 +1,1862 @@
> +#
> +# Automatically generated make config: don't edit
> +# Linux/arm 2.6.39 Kernel Configuration
> +# Wed Nov 30 12:32:57 2011
> +#
> +CONFIG_ARM=y
> +CONFIG_SYS_SUPPORTS_APM_EMULATION=y
> +CONFIG_GENERIC_GPIO=y
> +# CONFIG_ARCH_USES_GETTIMEOFFSET is not set
> +CONFIG_GENERIC_CLOCKEVENTS=y
> +CONFIG_KTIME_SCALAR=y
> +CONFIG_HAVE_PROC_CPU=y
> +CONFIG_STACKTRACE_SUPPORT=y
> +CONFIG_HAVE_LATENCYTOP_SUPPORT=y
> +CONFIG_LOCKDEP_SUPPORT=y
> +CONFIG_TRACE_IRQFLAGS_SUPPORT=y
> +CONFIG_HARDIRQS_SW_RESEND=y
> +CONFIG_GENERIC_IRQ_PROBE=y
> +CONFIG_RWSEM_GENERIC_SPINLOCK=y
> +CONFIG_ARCH_HAS_CPU_IDLE_WAIT=y
> +CONFIG_GENERIC_HWEIGHT=y
> +CONFIG_GENERIC_CALIBRATE_DELAY=y
> +CONFIG_NEED_DMA_MAP_STATE=y
> +CONFIG_VECTORS_BASE=0xffff0000
> +# CONFIG_ARM_PATCH_PHYS_VIRT is not set
> +CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
> +CONFIG_CONSTRUCTORS=y
> +CONFIG_HAVE_IRQ_WORK=y
> +
> +#
> +# General setup
> +#
> +CONFIG_EXPERIMENTAL=y
> +CONFIG_BROKEN_ON_SMP=y
> +CONFIG_INIT_ENV_ARG_LIMIT=32
> +CONFIG_CROSS_COMPILE=""
> +CONFIG_LOCALVERSION=""
> +# CONFIG_LOCALVERSION_AUTO is not set
> +CONFIG_HAVE_KERNEL_GZIP=y
> +CONFIG_HAVE_KERNEL_LZMA=y
> +CONFIG_HAVE_KERNEL_LZO=y
> +CONFIG_KERNEL_GZIP=y
> +# CONFIG_KERNEL_LZMA is not set
> +# CONFIG_KERNEL_LZO is not set
> +# CONFIG_SWAP is not set
> +CONFIG_SYSVIPC=y
> +CONFIG_SYSVIPC_SYSCTL=y
> +CONFIG_POSIX_MQUEUE=y
> +CONFIG_POSIX_MQUEUE_SYSCTL=y
> +# CONFIG_BSD_PROCESS_ACCT is not set
> +# CONFIG_FHANDLE is not set
> +# CONFIG_TASKSTATS is not set
> +# CONFIG_AUDIT is not set
> +CONFIG_HAVE_GENERIC_HARDIRQS=y
> +
> +#
> +# IRQ subsystem
> +#
> +CONFIG_GENERIC_HARDIRQS=y
> +CONFIG_HAVE_SPARSE_IRQ=y
> +CONFIG_GENERIC_IRQ_SHOW=y
> +# CONFIG_SPARSE_IRQ is not set
> +
> +#
> +# RCU Subsystem
> +#
> +CONFIG_TINY_RCU=y
> +# CONFIG_PREEMPT_RCU is not set
> +# CONFIG_RCU_TRACE is not set
> +# CONFIG_TREE_RCU_TRACE is not set
> +CONFIG_IKCONFIG=y
> +CONFIG_IKCONFIG_PROC=y
> +CONFIG_LOG_BUF_SHIFT=16
> +# CONFIG_CGROUPS is not set
> +# CONFIG_NAMESPACES is not set
> +# CONFIG_SCHED_AUTOGROUP is not set
> +# CONFIG_SYSFS_DEPRECATED is not set
> +# CONFIG_RELAY is not set
> +CONFIG_BLK_DEV_INITRD=y
> +CONFIG_INITRAMFS_SOURCE=""
> +CONFIG_RD_GZIP=y
> +CONFIG_RD_BZIP2=y
> +# CONFIG_RD_LZMA is not set
> +# CONFIG_RD_XZ is not set
> +# CONFIG_RD_LZO is not set
> +CONFIG_CC_OPTIMIZE_FOR_SIZE=y
> +CONFIG_SYSCTL=y
> +CONFIG_ANON_INODES=y
> +CONFIG_EXPERT=y
> +CONFIG_UID16=y
> +CONFIG_SYSCTL_SYSCALL=y
> +CONFIG_KALLSYMS=y
> +# CONFIG_KALLSYMS_ALL is not set
> +# CONFIG_KALLSYMS_EXTRA_PASS is not set
> +CONFIG_HOTPLUG=y
> +CONFIG_PRINTK=y
> +CONFIG_BUG=y
> +CONFIG_ELF_CORE=y
> +CONFIG_BASE_FULL=y
> +CONFIG_FUTEX=y
> +CONFIG_EPOLL=y
> +CONFIG_SIGNALFD=y
> +CONFIG_TIMERFD=y
> +CONFIG_EVENTFD=y
> +CONFIG_SHMEM=y
> +CONFIG_AIO=y
> +CONFIG_EMBEDDED=y
> +CONFIG_HAVE_PERF_EVENTS=y
> +CONFIG_PERF_USE_VMALLOC=y
> +
> +#
> +# Kernel Performance Events And Counters
> +#
> +# CONFIG_PERF_EVENTS is not set
> +# CONFIG_PERF_COUNTERS is not set
> +CONFIG_VM_EVENT_COUNTERS=y
> +CONFIG_COMPAT_BRK=y
> +CONFIG_SLAB=y
> +# CONFIG_SLUB is not set
> +# CONFIG_SLOB is not set
> +# CONFIG_PROFILING is not set
> +CONFIG_HAVE_OPROFILE=y
> +# CONFIG_KPROBES is not set
> +CONFIG_HAVE_KPROBES=y
> +CONFIG_HAVE_KRETPROBES=y
> +CONFIG_HAVE_REGS_AND_STACK_ACCESS_API=y
> +CONFIG_HAVE_CLK=y
> +CONFIG_HAVE_DMA_API_DEBUG=y
> +
> +#
> +# GCOV-based kernel profiling
> +#
> +# CONFIG_GCOV_KERNEL is not set
> +CONFIG_HAVE_GENERIC_DMA_COHERENT=y
> +CONFIG_SLABINFO=y
> +CONFIG_RT_MUTEXES=y
> +CONFIG_BASE_SMALL=0
> +CONFIG_MODULES=y
> +# CONFIG_MODULE_FORCE_LOAD is not set
> +CONFIG_MODULE_UNLOAD=y
> +# CONFIG_MODULE_FORCE_UNLOAD is not set
> +# CONFIG_MODVERSIONS is not set
> +# CONFIG_MODULE_SRCVERSION_ALL is not set
> +CONFIG_BLOCK=y
> +# CONFIG_LBDAF is not set
> +# CONFIG_BLK_DEV_BSG is not set
> +# CONFIG_BLK_DEV_INTEGRITY is not set
> +
> +#
> +# IO Schedulers
> +#
> +CONFIG_IOSCHED_NOOP=y
> +# CONFIG_IOSCHED_DEADLINE is not set
> +# CONFIG_IOSCHED_CFQ is not set
> +CONFIG_DEFAULT_NOOP=y
> +CONFIG_DEFAULT_IOSCHED="noop"
> +# CONFIG_INLINE_SPIN_TRYLOCK is not set
> +# CONFIG_INLINE_SPIN_TRYLOCK_BH is not set
> +# CONFIG_INLINE_SPIN_LOCK is not set
> +# CONFIG_INLINE_SPIN_LOCK_BH is not set
> +# CONFIG_INLINE_SPIN_LOCK_IRQ is not set
> +# CONFIG_INLINE_SPIN_LOCK_IRQSAVE is not set
> +CONFIG_INLINE_SPIN_UNLOCK=y
> +# CONFIG_INLINE_SPIN_UNLOCK_BH is not set
> +CONFIG_INLINE_SPIN_UNLOCK_IRQ=y
> +# CONFIG_INLINE_SPIN_UNLOCK_IRQRESTORE is not set
> +# CONFIG_INLINE_READ_TRYLOCK is not set
> +# CONFIG_INLINE_READ_LOCK is not set
> +# CONFIG_INLINE_READ_LOCK_BH is not set
> +# CONFIG_INLINE_READ_LOCK_IRQ is not set
> +# CONFIG_INLINE_READ_LOCK_IRQSAVE is not set
> +CONFIG_INLINE_READ_UNLOCK=y
> +# CONFIG_INLINE_READ_UNLOCK_BH is not set
> +CONFIG_INLINE_READ_UNLOCK_IRQ=y
> +# CONFIG_INLINE_READ_UNLOCK_IRQRESTORE is not set
> +# CONFIG_INLINE_WRITE_TRYLOCK is not set
> +# CONFIG_INLINE_WRITE_LOCK is not set
> +# CONFIG_INLINE_WRITE_LOCK_BH is not set
> +# CONFIG_INLINE_WRITE_LOCK_IRQ is not set
> +# CONFIG_INLINE_WRITE_LOCK_IRQSAVE is not set
> +CONFIG_INLINE_WRITE_UNLOCK=y
> +# CONFIG_INLINE_WRITE_UNLOCK_BH is not set
> +CONFIG_INLINE_WRITE_UNLOCK_IRQ=y
> +# CONFIG_INLINE_WRITE_UNLOCK_IRQRESTORE is not set
> +# CONFIG_MUTEX_SPIN_ON_OWNER is not set
> +CONFIG_FREEZER=y
> +
> +#
> +# System Type
> +#
> +CONFIG_MMU=y
> +# CONFIG_ARCH_INTEGRATOR is not set
> +# CONFIG_ARCH_REALVIEW is not set
> +# CONFIG_ARCH_VERSATILE is not set
> +# CONFIG_ARCH_VEXPRESS is not set
> +CONFIG_ARCH_AT91=y
> +# CONFIG_ARCH_BCMRING is not set
> +# CONFIG_ARCH_CLPS711X is not set
> +# CONFIG_ARCH_CNS3XXX is not set
> +# CONFIG_ARCH_GEMINI is not set
> +# CONFIG_ARCH_EBSA110 is not set
> +# CONFIG_ARCH_EP93XX is not set
> +# CONFIG_ARCH_FOOTBRIDGE is not set
> +# CONFIG_ARCH_MXC is not set
> +# CONFIG_ARCH_MXS is not set
> +# CONFIG_ARCH_STMP3XXX is not set
> +# CONFIG_ARCH_NETX is not set
> +# CONFIG_ARCH_H720X is not set
> +# CONFIG_ARCH_IOP13XX is not set
> +# CONFIG_ARCH_IOP32X is not set
> +# CONFIG_ARCH_IOP33X is not set
> +# CONFIG_ARCH_IXP23XX is not set
> +# CONFIG_ARCH_IXP2000 is not set
> +# CONFIG_ARCH_IXP4XX is not set
> +# CONFIG_ARCH_DOVE is not set
> +# CONFIG_ARCH_KIRKWOOD is not set
> +# CONFIG_ARCH_LOKI is not set
> +# CONFIG_ARCH_LPC32XX is not set
> +# CONFIG_ARCH_MV78XX0 is not set
> +# CONFIG_ARCH_ORION5X is not set
> +# CONFIG_ARCH_MMP is not set
> +# CONFIG_ARCH_KS8695 is not set
> +# CONFIG_ARCH_NS9XXX is not set
> +# CONFIG_ARCH_W90X900 is not set
> +# CONFIG_ARCH_NUC93X is not set
> +# CONFIG_ARCH_TEGRA is not set
> +# CONFIG_ARCH_PNX4008 is not set
> +# CONFIG_ARCH_PXA is not set
> +# CONFIG_ARCH_MSM is not set
> +# CONFIG_ARCH_SHMOBILE is not set
> +# CONFIG_ARCH_RPC is not set
> +# CONFIG_ARCH_SA1100 is not set
> +# CONFIG_ARCH_S3C2410 is not set
> +# CONFIG_ARCH_S3C64XX is not set
> +# CONFIG_ARCH_S5P64X0 is not set
> +# CONFIG_ARCH_S5P6442 is not set
> +# CONFIG_ARCH_S5PC100 is not set
> +# CONFIG_ARCH_S5PV210 is not set
> +# CONFIG_ARCH_EXYNOS4 is not set
> +# CONFIG_ARCH_SHARK is not set
> +# CONFIG_ARCH_TCC_926 is not set
> +# CONFIG_ARCH_U300 is not set
> +# CONFIG_ARCH_U8500 is not set
> +# CONFIG_ARCH_NOMADIK is not set
> +# CONFIG_ARCH_DAVINCI is not set
> +# CONFIG_ARCH_OMAP is not set
> +# CONFIG_PLAT_SPEAR is not set
> +# CONFIG_ARCH_VT8500 is not set
> +
> +#
> +# Atmel AT91 System-on-Chip
> +#
> +# CONFIG_ARCH_AT91RM9200 is not set
> +# CONFIG_ARCH_AT91SAM9260 is not set
> +# CONFIG_ARCH_AT91SAM9261 is not set
> +# CONFIG_ARCH_AT91SAM9G10 is not set
> +# CONFIG_ARCH_AT91SAM9263 is not set
> +# CONFIG_ARCH_AT91SAM9RL is not set
> +# CONFIG_ARCH_AT91SAM9G20 is not set
> +# CONFIG_ARCH_AT91SAM9G45 is not set
> +# CONFIG_ARCH_AT91SAM9X5 is not set
> +CONFIG_ARCH_AT91SAM9N12=y
> +# CONFIG_ARCH_AT91CAP9 is not set
> +# CONFIG_ARCH_AT572D940HF is not set
> +# CONFIG_ARCH_AT91X40 is not set
> +CONFIG_AT91_PMC_UNIT=y
> +
> +#
> +# AT91SAM9N12 Board Type
> +#
> +CONFIG_MACH_AT91SAM9N12EK=y
> +
> +#
> +# AT91 Board Options
> +#
> +
> +#
> +# AT91 Feature Selections
> +#
> +CONFIG_AT91_PROGRAMMABLE_CLOCKS=y
> +CONFIG_AT91_SLOW_CLOCK=y
> +CONFIG_AT91_TIMER_HZ=100
> +CONFIG_AT91_EARLY_DBGU=y
> +# CONFIG_AT91_EARLY_USART0 is not set
> +# CONFIG_AT91_EARLY_USART1 is not set
> +# CONFIG_AT91_EARLY_USART2 is not set
> +# CONFIG_GPIO_PCA953X is not set
> +# CONFIG_KEYBOARD_GPIO_POLLED is not set
> +
> +#
> +# System MMU
> +#
> +
> +#
> +# Processor Type
> +#
> +CONFIG_CPU_ARM926T=y
> +CONFIG_CPU_32v5=y
> +CONFIG_CPU_ABRT_EV5TJ=y
> +CONFIG_CPU_PABRT_LEGACY=y
> +CONFIG_CPU_CACHE_VIVT=y
> +CONFIG_CPU_COPY_V4WB=y
> +CONFIG_CPU_TLB_V4WBI=y
> +CONFIG_CPU_CP15=y
> +CONFIG_CPU_CP15_MMU=y
> +CONFIG_CPU_USE_DOMAINS=y
> +
> +#
> +# Processor Features
> +#
> +CONFIG_ARM_THUMB=y
> +# CONFIG_CPU_ICACHE_DISABLE is not set
> +# CONFIG_CPU_DCACHE_DISABLE is not set
> +# CONFIG_CPU_DCACHE_WRITETHROUGH is not set
> +# CONFIG_CPU_CACHE_ROUND_ROBIN is not set
> +CONFIG_ARM_L1_CACHE_SHIFT=5
> +
> +#
> +# Bus support
> +#
> +# CONFIG_PCI_SYSCALL is not set
> +# CONFIG_ARCH_SUPPORTS_MSI is not set
> +# CONFIG_PCCARD is not set
> +
> +#
> +# Kernel Features
> +#
> +CONFIG_TICK_ONESHOT=y
> +# CONFIG_NO_HZ is not set
> +CONFIG_HIGH_RES_TIMERS=y
> +CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
> +CONFIG_VMSPLIT_3G=y
> +# CONFIG_VMSPLIT_2G is not set
> +# CONFIG_VMSPLIT_1G is not set
> +CONFIG_PAGE_OFFSET=0xC0000000
> +CONFIG_PREEMPT_NONE=y
> +# CONFIG_PREEMPT_VOLUNTARY is not set
> +# CONFIG_PREEMPT is not set
> +CONFIG_HZ=100
> +CONFIG_AEABI=y
> +CONFIG_OABI_COMPAT=y
> +# CONFIG_ARCH_SPARSEMEM_DEFAULT is not set
> +# CONFIG_ARCH_SELECT_MEMORY_MODEL is not set
> +# CONFIG_HIGHMEM is not set
> +CONFIG_SELECT_MEMORY_MODEL=y
> +CONFIG_FLATMEM_MANUAL=y
> +CONFIG_FLATMEM=y
> +CONFIG_FLAT_NODE_MEM_MAP=y
> +CONFIG_HAVE_MEMBLOCK=y
> +CONFIG_PAGEFLAGS_EXTENDED=y
> +CONFIG_SPLIT_PTLOCK_CPUS=999999
> +# CONFIG_COMPACTION is not set
> +# CONFIG_PHYS_ADDR_T_64BIT is not set
> +CONFIG_ZONE_DMA_FLAG=0
> +CONFIG_VIRT_TO_BUS=y
> +# CONFIG_KSM is not set
> +CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
> +CONFIG_NEED_PER_CPU_KM=y
> +CONFIG_FORCE_MAX_ZONEORDER=11
> +CONFIG_LEDS=y
> +CONFIG_LEDS_CPU=y
> +CONFIG_ALIGNMENT_TRAP=y
> +CONFIG_UACCESS_WITH_MEMCPY=y
> +# CONFIG_SECCOMP is not set
> +# CONFIG_CC_STACKPROTECTOR is not set
> +# CONFIG_DEPRECATED_PARAM_STRUCT is not set
> +
> +#
> +# Boot options
> +#
> +CONFIG_ZBOOT_ROM_TEXT=0x0
> +CONFIG_ZBOOT_ROM_BSS=0x0
> +CONFIG_CMDLINE="console=ttyS0,115200 mtdparts=atmel_nand:8M(bootstrap/uboot/kernel)oo,-(rootfs) root=/dev/mtdblock1 rw rootfstype=ubifs ubi.mtd=1 root=ubi0:at91sam9n12ek-rootfs"
> +# CONFIG_CMDLINE_FORCE is not set
> +# CONFIG_XIP_KERNEL is not set
> +# CONFIG_KEXEC is not set
> +# CONFIG_CRASH_DUMP is not set
> +CONFIG_AUTO_ZRELADDR=y
> +
> +#
> +# CPU Power Management
> +#
> +# CONFIG_CPU_IDLE is not set
> +
> +#
> +# Floating point emulation
> +#
> +
> +#
> +# At least one emulation must be selected
> +#
> +CONFIG_FPE_NWFPE=y
> +# CONFIG_FPE_NWFPE_XP is not set
> +# CONFIG_FPE_FASTFPE is not set
> +# CONFIG_VFP is not set
> +
> +#
> +# Userspace binary formats
> +#
> +CONFIG_BINFMT_ELF=y
> +# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
> +CONFIG_HAVE_AOUT=y
> +# CONFIG_BINFMT_AOUT is not set
> +# CONFIG_BINFMT_MISC is not set
> +
> +#
> +# Power management options
> +#
> +CONFIG_SUSPEND=y
> +CONFIG_SUSPEND_FREEZER=y
> +CONFIG_PM_SLEEP=y
> +# CONFIG_PM_RUNTIME is not set
> +CONFIG_PM=y
> +# CONFIG_PM_DEBUG is not set
> +# CONFIG_APM_EMULATION is not set
> +CONFIG_ARCH_SUSPEND_POSSIBLE=y
> +CONFIG_NET=y
> +
> +#
> +# Networking options
> +#
> +CONFIG_PACKET=y
> +CONFIG_UNIX=y
> +# CONFIG_NET_KEY is not set
> +CONFIG_INET=y
> +CONFIG_IP_MULTICAST=y
> +CONFIG_IP_ADVANCED_ROUTER=y
> +# CONFIG_IP_FIB_TRIE_STATS is not set
> +# CONFIG_IP_MULTIPLE_TABLES is not set
> +# CONFIG_IP_ROUTE_MULTIPATH is not set
> +# CONFIG_IP_ROUTE_VERBOSE is not set
> +CONFIG_IP_PNP=y
> +CONFIG_IP_PNP_DHCP=y
> +# CONFIG_IP_PNP_BOOTP is not set
> +# CONFIG_IP_PNP_RARP is not set
> +# CONFIG_NET_IPIP is not set
> +# CONFIG_NET_IPGRE_DEMUX is not set
> +# CONFIG_IP_MROUTE is not set
> +# CONFIG_ARPD is not set
> +# CONFIG_SYN_COOKIES is not set
> +# CONFIG_INET_AH is not set
> +# CONFIG_INET_ESP is not set
> +# CONFIG_INET_IPCOMP is not set
> +# CONFIG_INET_XFRM_TUNNEL is not set
> +# CONFIG_INET_TUNNEL is not set
> +# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
> +# CONFIG_INET_XFRM_MODE_TUNNEL is not set
> +# CONFIG_INET_XFRM_MODE_BEET is not set
> +# CONFIG_INET_LRO is not set
> +CONFIG_INET_DIAG=y
> +CONFIG_INET_TCP_DIAG=y
> +# CONFIG_TCP_CONG_ADVANCED is not set
> +CONFIG_TCP_CONG_CUBIC=y
> +CONFIG_DEFAULT_TCP_CONG="cubic"
> +# CONFIG_TCP_MD5SIG is not set
> +# CONFIG_IPV6 is not set
> +# CONFIG_NETWORK_SECMARK is not set
> +# CONFIG_NETWORK_PHY_TIMESTAMPING is not set
> +# CONFIG_NETFILTER is not set
> +# CONFIG_IP_DCCP is not set
> +# CONFIG_IP_SCTP is not set
> +# CONFIG_RDS is not set
> +# CONFIG_TIPC is not set
> +# CONFIG_ATM is not set
> +# CONFIG_L2TP is not set
> +# CONFIG_BRIDGE is not set
> +# CONFIG_NET_DSA is not set
> +# CONFIG_VLAN_8021Q is not set
> +# CONFIG_DECNET is not set
> +# CONFIG_LLC2 is not set
> +# CONFIG_IPX is not set
> +# CONFIG_ATALK is not set
> +# CONFIG_X25 is not set
> +# CONFIG_LAPB is not set
> +# CONFIG_ECONET is not set
> +# CONFIG_WAN_ROUTER is not set
> +# CONFIG_PHONET is not set
> +# CONFIG_IEEE802154 is not set
> +# CONFIG_NET_SCHED is not set
> +# CONFIG_DCB is not set
> +CONFIG_DNS_RESOLVER=y
> +# CONFIG_BATMAN_ADV is not set
> +
> +#
> +# Network testing
> +#
> +# CONFIG_NET_PKTGEN is not set
> +# CONFIG_HAMRADIO is not set
> +# CONFIG_CAN is not set
> +# CONFIG_IRDA is not set
> +# CONFIG_BT is not set
> +# CONFIG_AF_RXRPC is not set
> +# CONFIG_WIRELESS is not set
> +# CONFIG_WIMAX is not set
> +# CONFIG_RFKILL is not set
> +# CONFIG_NET_9P is not set
> +# CONFIG_CAIF is not set
> +# CONFIG_CEPH_LIB is not set
> +
> +#
> +# Device Drivers
> +#
> +
> +#
> +# Generic Driver Options
> +#
> +CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
> +# CONFIG_DEVTMPFS is not set
> +# CONFIG_STANDALONE is not set
> +# CONFIG_PREVENT_FIRMWARE_BUILD is not set
> +CONFIG_FW_LOADER=y
> +# CONFIG_FIRMWARE_IN_KERNEL is not set
> +CONFIG_EXTRA_FIRMWARE=""
> +# CONFIG_DEBUG_DRIVER is not set
> +# CONFIG_DEBUG_DEVRES is not set
> +# CONFIG_SYS_HYPERVISOR is not set
> +# CONFIG_CONNECTOR is not set
> +CONFIG_MTD=y
> +# CONFIG_MTD_DEBUG is not set
> +CONFIG_MTD_TESTS=m
> +CONFIG_MTD_PARTITIONS=y
> +# CONFIG_MTD_REDBOOT_PARTS is not set
> +CONFIG_MTD_CMDLINE_PARTS=y
> +# CONFIG_MTD_AFS_PARTS is not set
> +# CONFIG_MTD_AR7_PARTS is not set
> +
> +#
> +# User Modules And Translation Layers
> +#
> +CONFIG_MTD_CHAR=y
> +CONFIG_MTD_BLKDEVS=y
> +CONFIG_MTD_BLOCK=y
> +# CONFIG_FTL is not set
> +# CONFIG_NFTL is not set
> +# CONFIG_INFTL is not set
> +# CONFIG_RFD_FTL is not set
> +# CONFIG_SSFDC is not set
> +# CONFIG_SM_FTL is not set
> +# CONFIG_MTD_OOPS is not set
> +
> +#
> +# RAM/ROM/Flash chip drivers
> +#
> +# CONFIG_MTD_CFI is not set
> +# CONFIG_MTD_JEDECPROBE is not set
> +CONFIG_MTD_MAP_BANK_WIDTH_1=y
> +CONFIG_MTD_MAP_BANK_WIDTH_2=y
> +CONFIG_MTD_MAP_BANK_WIDTH_4=y
> +# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
> +# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
> +# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
> +CONFIG_MTD_CFI_I1=y
> +CONFIG_MTD_CFI_I2=y
> +# CONFIG_MTD_CFI_I4 is not set
> +# CONFIG_MTD_CFI_I8 is not set
> +# CONFIG_MTD_RAM is not set
> +# CONFIG_MTD_ROM is not set
> +# CONFIG_MTD_ABSENT is not set
> +
> +#
> +# Mapping drivers for chip access
> +#
> +# CONFIG_MTD_COMPLEX_MAPPINGS is not set
> +# CONFIG_MTD_PLATRAM is not set
> +
> +#
> +# Self-contained MTD device drivers
> +#
> +# CONFIG_MTD_DATAFLASH is not set
> +# CONFIG_MTD_M25P80 is not set
> +# CONFIG_MTD_SST25L is not set
> +# CONFIG_MTD_SLRAM is not set
> +# CONFIG_MTD_PHRAM is not set
> +# CONFIG_MTD_MTDRAM is not set
> +# CONFIG_MTD_BLOCK2MTD is not set
> +
> +#
> +# Disk-On-Chip Device Drivers
> +#
> +# CONFIG_MTD_DOC2000 is not set
> +# CONFIG_MTD_DOC2001 is not set
> +# CONFIG_MTD_DOC2001PLUS is not set
> +CONFIG_MTD_NAND_ECC=y
> +# CONFIG_MTD_NAND_ECC_SMC is not set
> +CONFIG_MTD_NAND=y
> +# CONFIG_MTD_NAND_VERIFY_WRITE is not set
> +# CONFIG_MTD_NAND_ECC_BCH is not set
> +# CONFIG_MTD_SM_COMMON is not set
> +# CONFIG_MTD_NAND_MUSEUM_IDS is not set
> +# CONFIG_MTD_NAND_GPIO is not set
> +CONFIG_MTD_NAND_IDS=y
> +# CONFIG_MTD_NAND_DISKONCHIP is not set
> +CONFIG_MTD_NAND_ATMEL=y
> +CONFIG_MTD_NAND_ATMEL_PMECC_HW=y
> +# CONFIG_MTD_NAND_ATMEL_ECC_SOFT is not set
> +# CONFIG_MTD_NAND_ATMEL_ECC_NONE is not set
> +# CONFIG_MTD_NAND_NANDSIM is not set
> +# CONFIG_MTD_NAND_PLATFORM is not set
> +# CONFIG_MTD_ALAUDA is not set
> +# CONFIG_MTD_ONENAND is not set
> +
> +#
> +# LPDDR flash memory drivers
> +#
> +# CONFIG_MTD_LPDDR is not set
> +CONFIG_MTD_UBI=y
> +CONFIG_MTD_UBI_WL_THRESHOLD=4096
> +CONFIG_MTD_UBI_BEB_RESERVE=1
> +# CONFIG_MTD_UBI_GLUEBI is not set
> +# CONFIG_MTD_UBI_DEBUG is not set
> +# CONFIG_PARPORT is not set
> +CONFIG_BLK_DEV=y
> +# CONFIG_BLK_DEV_COW_COMMON is not set
> +CONFIG_BLK_DEV_LOOP=y
> +# CONFIG_BLK_DEV_CRYPTOLOOP is not set
> +
> +#
> +# DRBD disabled because PROC_FS, INET or CONNECTOR not selected
> +#
> +# CONFIG_BLK_DEV_NBD is not set
> +# CONFIG_BLK_DEV_UB is not set
> +CONFIG_BLK_DEV_RAM=y
> +CONFIG_BLK_DEV_RAM_COUNT=2
> +CONFIG_BLK_DEV_RAM_SIZE=16384
> +# CONFIG_BLK_DEV_XIP is not set
> +# CONFIG_CDROM_PKTCDVD is not set
> +# CONFIG_ATA_OVER_ETH is not set
> +# CONFIG_MG_DISK is not set
> +# CONFIG_BLK_DEV_RBD is not set
> +# CONFIG_SENSORS_LIS3LV02D is not set
> +CONFIG_MISC_DEVICES=y
> +# CONFIG_AD525X_DPOT is not set
> +CONFIG_ATMEL_TCLIB=y
> +CONFIG_ATMEL_TCB_CLKSRC=y
> +CONFIG_ATMEL_TCB_CLKSRC_BLOCK=0
> +CONFIG_ATMEL_TCB_CLKSRC_32BIT=y
> +# CONFIG_ICS932S401 is not set
> +CONFIG_ATMEL_SSC=y
> +# CONFIG_ENCLOSURE_SERVICES is not set
> +# CONFIG_APDS9802ALS is not set
> +# CONFIG_ISL29003 is not set
> +# CONFIG_ISL29020 is not set
> +# CONFIG_SENSORS_TSL2550 is not set
> +# CONFIG_SENSORS_BH1780 is not set
> +# CONFIG_SENSORS_BH1770 is not set
> +# CONFIG_SENSORS_APDS990X is not set
> +# CONFIG_HMC6352 is not set
> +# CONFIG_DS1682 is not set
> +# CONFIG_TI_DAC7512 is not set
> +# CONFIG_BMP085 is not set
> +# CONFIG_C2PORT is not set
> +
> +#
> +# EEPROM support
> +#
> +# CONFIG_EEPROM_AT24 is not set
> +# CONFIG_EEPROM_AT25 is not set
> +# CONFIG_EEPROM_LEGACY is not set
> +# CONFIG_EEPROM_MAX6875 is not set
> +# CONFIG_EEPROM_93CX6 is not set
> +# CONFIG_IWMC3200TOP is not set
> +
> +#
> +# Texas Instruments shared transport line discipline
> +#
> +# CONFIG_SENSORS_LIS3_SPI is not set
> +# CONFIG_SENSORS_LIS3_I2C is not set
> +CONFIG_HAVE_IDE=y
> +# CONFIG_IDE is not set
> +
> +#
> +# SCSI device support
> +#
> +CONFIG_SCSI_MOD=y
> +# CONFIG_RAID_ATTRS is not set
> +CONFIG_SCSI=y
> +CONFIG_SCSI_DMA=y
> +# CONFIG_SCSI_TGT is not set
> +# CONFIG_SCSI_NETLINK is not set
> +CONFIG_SCSI_PROC_FS=y
> +
> +#
> +# SCSI support type (disk, tape, CD-ROM)
> +#
> +CONFIG_BLK_DEV_SD=y
> +# CONFIG_CHR_DEV_ST is not set
> +# CONFIG_CHR_DEV_OSST is not set
> +# CONFIG_BLK_DEV_SR is not set
> +# CONFIG_CHR_DEV_SG is not set
> +# CONFIG_CHR_DEV_SCH is not set
> +CONFIG_SCSI_MULTI_LUN=y
> +# CONFIG_SCSI_CONSTANTS is not set
> +# CONFIG_SCSI_LOGGING is not set
> +# CONFIG_SCSI_SCAN_ASYNC is not set
> +CONFIG_SCSI_WAIT_SCAN=m
> +
> +#
> +# SCSI Transports
> +#
> +# CONFIG_SCSI_SPI_ATTRS is not set
> +# CONFIG_SCSI_FC_ATTRS is not set
> +# CONFIG_SCSI_ISCSI_ATTRS is not set
> +# CONFIG_SCSI_SAS_ATTRS is not set
> +# CONFIG_SCSI_SAS_LIBSAS is not set
> +# CONFIG_SCSI_SRP_ATTRS is not set
> +# CONFIG_SCSI_LOWLEVEL is not set
> +# CONFIG_SCSI_DH is not set
> +# CONFIG_SCSI_OSD_INITIATOR is not set
> +# CONFIG_ATA is not set
> +# CONFIG_MD is not set
> +# CONFIG_TARGET_CORE is not set
> +CONFIG_NETDEVICES=y
> +# CONFIG_DUMMY is not set
> +# CONFIG_BONDING is not set
> +# CONFIG_MACVLAN is not set
> +# CONFIG_EQUALIZER is not set
> +# CONFIG_TUN is not set
> +# CONFIG_VETH is not set
> +CONFIG_MII=y
> +# CONFIG_PHYLIB is not set
> +CONFIG_NET_ETHERNET=y
> +# CONFIG_AX88796 is not set
> +# CONFIG_SMC91X is not set
> +# CONFIG_DM9000 is not set
> +# CONFIG_ENC28J60 is not set
> +# CONFIG_ETHOC is not set
> +# CONFIG_SMC911X is not set
> +# CONFIG_SMSC911X is not set
> +# CONFIG_DNET is not set
> +# CONFIG_IBM_NEW_EMAC_ZMII is not set
> +# CONFIG_IBM_NEW_EMAC_RGMII is not set
> +# CONFIG_IBM_NEW_EMAC_TAH is not set
> +# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
> +# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
> +# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
> +# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
> +# CONFIG_B44 is not set
> +# CONFIG_KS8842 is not set
> +# CONFIG_KS8851 is not set
> +CONFIG_KS8851_MLL=y
> +# CONFIG_FTMAC100 is not set
> +# CONFIG_NETDEV_1000 is not set
> +# CONFIG_NETDEV_10000 is not set
> +# CONFIG_WLAN is not set
> +
> +#
> +# Enable WiMAX (Networking options) to see the WiMAX drivers
> +#
> +
> +#
> +# USB Network Adapters
> +#
> +# CONFIG_USB_CATC is not set
> +# CONFIG_USB_KAWETH is not set
> +# CONFIG_USB_PEGASUS is not set
> +# CONFIG_USB_RTL8150 is not set
> +# CONFIG_USB_USBNET is not set
> +# CONFIG_USB_IPHETH is not set
> +# CONFIG_WAN is not set
> +
> +#
> +# CAIF transport drivers
> +#
> +# CONFIG_PPP is not set
> +# CONFIG_SLIP is not set
> +# CONFIG_NETCONSOLE is not set
> +# CONFIG_NETPOLL is not set
> +# CONFIG_NET_POLL_CONTROLLER is not set
> +# CONFIG_ISDN is not set
> +# CONFIG_PHONE is not set
> +
> +#
> +# Input device support
> +#
> +CONFIG_INPUT=y
> +# CONFIG_INPUT_FF_MEMLESS is not set
> +# CONFIG_INPUT_POLLDEV is not set
> +# CONFIG_INPUT_SPARSEKMAP is not set
> +
> +#
> +# Userland interfaces
> +#
> +CONFIG_INPUT_MOUSEDEV=y
> +CONFIG_INPUT_MOUSEDEV_PSAUX=y
> +CONFIG_INPUT_MOUSEDEV_SCREEN_X=480
> +CONFIG_INPUT_MOUSEDEV_SCREEN_Y=272
> +# CONFIG_INPUT_JOYDEV is not set
> +CONFIG_INPUT_EVDEV=y
> +# CONFIG_INPUT_EVBUG is not set
> +
> +#
> +# Input Device Drivers
> +#
> +CONFIG_INPUT_KEYBOARD=y
> +# CONFIG_KEYBOARD_ADP5588 is not set
> +# CONFIG_KEYBOARD_ATKBD is not set
> +CONFIG_KEYBOARD_QT1070=y
> +# CONFIG_KEYBOARD_QT2160 is not set
> +# CONFIG_KEYBOARD_LKKBD is not set
> +CONFIG_KEYBOARD_GPIO=y
> +# CONFIG_KEYBOARD_TCA6416 is not set
> +# CONFIG_KEYBOARD_MATRIX is not set
> +# CONFIG_KEYBOARD_LM8323 is not set
> +# CONFIG_KEYBOARD_MAX7359 is not set
> +# CONFIG_KEYBOARD_MCS is not set
> +# CONFIG_KEYBOARD_NEWTON is not set
> +# CONFIG_KEYBOARD_OPENCORES is not set
> +# CONFIG_KEYBOARD_STOWAWAY is not set
> +# CONFIG_KEYBOARD_SUNKBD is not set
> +# CONFIG_KEYBOARD_XTKBD is not set
> +# CONFIG_INPUT_MOUSE is not set
> +# CONFIG_INPUT_JOYSTICK is not set
> +# CONFIG_INPUT_TABLET is not set
> +CONFIG_INPUT_TOUCHSCREEN=y
> +# CONFIG_TOUCHSCREEN_ADS7846 is not set
> +# CONFIG_TOUCHSCREEN_AD7877 is not set
> +# CONFIG_TOUCHSCREEN_AD7879 is not set
> +# CONFIG_TOUCHSCREEN_ATMEL_MXT is not set
> +# CONFIG_TOUCHSCREEN_BU21013 is not set
> +# CONFIG_TOUCHSCREEN_CY8CTMG110 is not set
> +# CONFIG_TOUCHSCREEN_DYNAPRO is not set
> +# CONFIG_TOUCHSCREEN_HAMPSHIRE is not set
> +# CONFIG_TOUCHSCREEN_EETI is not set
> +# CONFIG_TOUCHSCREEN_FUJITSU is not set
> +# CONFIG_TOUCHSCREEN_GUNZE is not set
> +# CONFIG_TOUCHSCREEN_ELO is not set
> +# CONFIG_TOUCHSCREEN_WACOM_W8001 is not set
> +# CONFIG_TOUCHSCREEN_MCS5000 is not set
> +# CONFIG_TOUCHSCREEN_MTOUCH is not set
> +# CONFIG_TOUCHSCREEN_INEXIO is not set
> +# CONFIG_TOUCHSCREEN_MK712 is not set
> +# CONFIG_TOUCHSCREEN_PENMOUNT is not set
> +# CONFIG_TOUCHSCREEN_TOUCHRIGHT is not set
> +# CONFIG_TOUCHSCREEN_TOUCHWIN is not set
> +CONFIG_TOUCHSCREEN_ATMEL_TSADCC=y
> +# CONFIG_TOUCHSCREEN_USB_COMPOSITE is not set
> +# CONFIG_TOUCHSCREEN_TOUCHIT213 is not set
> +# CONFIG_TOUCHSCREEN_TSC2005 is not set
> +# CONFIG_TOUCHSCREEN_TSC2007 is not set
> +# CONFIG_TOUCHSCREEN_W90X900 is not set
> +# CONFIG_TOUCHSCREEN_ST1232 is not set
> +# CONFIG_TOUCHSCREEN_TPS6507X is not set
> +# CONFIG_INPUT_MISC is not set
> +
> +#
> +# Hardware I/O ports
> +#
> +# CONFIG_SERIO is not set
> +# CONFIG_GAMEPORT is not set
> +
> +#
> +# Character devices
> +#
> +CONFIG_VT=y
> +CONFIG_CONSOLE_TRANSLATIONS=y
> +# CONFIG_VT_CONSOLE is not set
> +CONFIG_HW_CONSOLE=y
> +# CONFIG_VT_HW_CONSOLE_BINDING is not set
> +CONFIG_UNIX98_PTYS=y
> +# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
> +CONFIG_LEGACY_PTYS=y
> +CONFIG_LEGACY_PTY_COUNT=8
> +# CONFIG_SERIAL_NONSTANDARD is not set
> +# CONFIG_N_GSM is not set
> +CONFIG_DEVKMEM=y
> +
> +#
> +# Serial drivers
> +#
> +# CONFIG_SERIAL_8250 is not set
> +
> +#
> +# Non-8250 serial port support
> +#
> +CONFIG_SERIAL_ATMEL=y
> +CONFIG_SERIAL_ATMEL_CONSOLE=y
> +CONFIG_SERIAL_ATMEL_DMA=y
> +# CONFIG_SERIAL_ATMEL_TTYAT is not set
> +# CONFIG_SERIAL_MAX3100 is not set
> +# CONFIG_SERIAL_MAX3107 is not set
> +CONFIG_SERIAL_CORE=y
> +CONFIG_SERIAL_CORE_CONSOLE=y
> +# CONFIG_SERIAL_TIMBERDALE is not set
> +# CONFIG_SERIAL_ALTERA_JTAGUART is not set
> +# CONFIG_SERIAL_ALTERA_UART is not set
> +# CONFIG_SERIAL_IFX6X60 is not set
> +# CONFIG_TTY_PRINTK is not set
> +# CONFIG_HVC_DCC is not set
> +# CONFIG_IPMI_HANDLER is not set
> +# CONFIG_HW_RANDOM is not set
> +# CONFIG_R3964 is not set
> +# CONFIG_RAW_DRIVER is not set
> +# CONFIG_TCG_TPM is not set
> +# CONFIG_RAMOOPS is not set
> +CONFIG_I2C=y
> +CONFIG_I2C_BOARDINFO=y
> +# CONFIG_I2C_COMPAT is not set
> +CONFIG_I2C_CHARDEV=y
> +# CONFIG_I2C_MUX is not set
> +CONFIG_I2C_HELPER_AUTO=y
> +CONFIG_I2C_ALGOBIT=y
> +
> +#
> +# I2C Hardware Bus support
> +#
> +
> +#
> +# I2C system bus drivers (mostly embedded / system-on-chip)
> +#
> +# CONFIG_I2C_DESIGNWARE is not set
> +CONFIG_I2C_GPIO=y
> +# CONFIG_I2C_OCORES is not set
> +# CONFIG_I2C_PCA_PLATFORM is not set
> +# CONFIG_I2C_PXA_PCI is not set
> +# CONFIG_I2C_SIMTEC is not set
> +# CONFIG_I2C_XILINX is not set
> +
> +#
> +# External I2C/SMBus adapter drivers
> +#
> +# CONFIG_I2C_DIOLAN_U2C is not set
> +# CONFIG_I2C_PARPORT_LIGHT is not set
> +# CONFIG_I2C_TAOS_EVM is not set
> +# CONFIG_I2C_TINY_USB is not set
> +
> +#
> +# Other I2C/SMBus bus drivers
> +#
> +# CONFIG_I2C_STUB is not set
> +# CONFIG_I2C_DEBUG_CORE is not set
> +# CONFIG_I2C_DEBUG_ALGO is not set
> +# CONFIG_I2C_DEBUG_BUS is not set
> +CONFIG_SPI=y
> +# CONFIG_SPI_DEBUG is not set
> +CONFIG_SPI_MASTER=y
> +
> +#
> +# SPI Master Controller Drivers
> +#
> +# CONFIG_SPI_ALTERA is not set
> +CONFIG_SPI_ATMEL=y
> +CONFIG_SPI_ATMEL_DMA=y
> +# CONFIG_SPI_BITBANG is not set
> +# CONFIG_SPI_GPIO is not set
> +# CONFIG_SPI_OC_TINY is not set
> +# CONFIG_SPI_PXA2XX_PCI is not set
> +# CONFIG_SPI_XILINX is not set
> +# CONFIG_SPI_DESIGNWARE is not set
> +
> +#
> +# SPI Protocol Masters
> +#
> +# CONFIG_SPI_SPIDEV is not set
> +# CONFIG_SPI_TLE62X0 is not set
> +
> +#
> +# PPS support
> +#
> +# CONFIG_PPS is not set
> +
> +#
> +# PPS generators support
> +#
> +CONFIG_ARCH_REQUIRE_GPIOLIB=y
> +CONFIG_GPIOLIB=y
> +# CONFIG_DEBUG_GPIO is not set
> +CONFIG_GPIO_SYSFS=y
> +
> +#
> +# Memory mapped GPIO expanders:
> +#
> +# CONFIG_GPIO_BASIC_MMIO is not set
> +# CONFIG_GPIO_IT8761E is not set
> +
> +#
> +# I2C GPIO expanders:
> +#
> +# CONFIG_GPIO_MAX7300 is not set
> +# CONFIG_GPIO_MAX732X is not set
> +# CONFIG_GPIO_PCF857X is not set
> +# CONFIG_GPIO_SX150X is not set
> +# CONFIG_GPIO_ADP5588 is not set
> +
> +#
> +# PCI GPIO expanders:
> +#
> +
> +#
> +# SPI GPIO expanders:
> +#
> +# CONFIG_GPIO_MAX7301 is not set
> +# CONFIG_GPIO_MCP23S08 is not set
> +# CONFIG_GPIO_MC33880 is not set
> +# CONFIG_GPIO_74X164 is not set
> +
> +#
> +# AC97 GPIO expanders:
> +#
> +
> +#
> +# MODULbus GPIO expanders:
> +#
> +# CONFIG_W1 is not set
> +# CONFIG_POWER_SUPPLY is not set
> +# CONFIG_HWMON is not set
> +# CONFIG_THERMAL is not set
> +# CONFIG_WATCHDOG is not set
> +CONFIG_SSB_POSSIBLE=y
> +
> +#
> +# Sonics Silicon Backplane
> +#
> +# CONFIG_SSB is not set
> +# CONFIG_MFD_SUPPORT is not set
> +# CONFIG_REGULATOR is not set
> +# CONFIG_MEDIA_SUPPORT is not set
> +
> +#
> +# Graphics support
> +#
> +CONFIG_HAVE_FB_ATMEL=y
> +CONFIG_FB_ATMEL_HLCD=y
> +# CONFIG_DRM is not set
> +# CONFIG_VGASTATE is not set
> +# CONFIG_VIDEO_OUTPUT_CONTROL is not set
> +CONFIG_FB=y
> +# CONFIG_FIRMWARE_EDID is not set
> +# CONFIG_FB_DDC is not set
> +# CONFIG_FB_BOOT_VESA_SUPPORT is not set
> +CONFIG_FB_CFB_FILLRECT=y
> +CONFIG_FB_CFB_COPYAREA=y
> +CONFIG_FB_CFB_IMAGEBLIT=y
> +# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
> +# CONFIG_FB_SYS_FILLRECT is not set
> +# CONFIG_FB_SYS_COPYAREA is not set
> +# CONFIG_FB_SYS_IMAGEBLIT is not set
> +# CONFIG_FB_FOREIGN_ENDIAN is not set
> +# CONFIG_FB_SYS_FOPS is not set
> +# CONFIG_FB_WMT_GE_ROPS is not set
> +# CONFIG_FB_SVGALIB is not set
> +# CONFIG_FB_MACMODES is not set
> +# CONFIG_FB_BACKLIGHT is not set
> +# CONFIG_FB_MODE_HELPERS is not set
> +# CONFIG_FB_TILEBLITTING is not set
> +
> +#
> +# Frame buffer hardware drivers
> +#
> +# CONFIG_FB_S1D13XXX is not set
> +CONFIG_FB_ATMEL=y
> +# CONFIG_FB_UDL is not set
> +# CONFIG_FB_VIRTUAL is not set
> +# CONFIG_FB_METRONOME is not set
> +# CONFIG_FB_MB862XX is not set
> +# CONFIG_FB_BROADSHEET is not set
> +CONFIG_BACKLIGHT_LCD_SUPPORT=y
> +# CONFIG_LCD_CLASS_DEVICE is not set
> +CONFIG_BACKLIGHT_CLASS_DEVICE=y
> +CONFIG_BACKLIGHT_ATMEL_LCDC=y
> +# CONFIG_BACKLIGHT_GENERIC is not set
> +# CONFIG_BACKLIGHT_ADP8860 is not set
> +
> +#
> +# Display device support
> +#
> +# CONFIG_DISPLAY_SUPPORT is not set
> +
> +#
> +# Console display driver support
> +#
> +CONFIG_DUMMY_CONSOLE=y
> +CONFIG_FRAMEBUFFER_CONSOLE=y
> +# CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY is not set
> +# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set
> +CONFIG_FONTS=y
> +CONFIG_FONT_8x8=y
> +CONFIG_FONT_8x16=y
> +# CONFIG_FONT_6x11 is not set
> +# CONFIG_FONT_7x14 is not set
> +# CONFIG_FONT_PEARL_8x8 is not set
> +# CONFIG_FONT_ACORN_8x8 is not set
> +# CONFIG_FONT_MINI_4x6 is not set
> +# CONFIG_FONT_SUN8x16 is not set
> +# CONFIG_FONT_SUN12x22 is not set
> +# CONFIG_FONT_10x18 is not set
> +CONFIG_LOGO=y
> +CONFIG_LOGO_LINUX_MONO=y
> +CONFIG_LOGO_LINUX_VGA16=y
> +CONFIG_LOGO_LINUX_CLUT224=y
> +CONFIG_SOUND=y
> +CONFIG_SOUND_OSS_CORE=y
> +CONFIG_SOUND_OSS_CORE_PRECLAIM=y
> +CONFIG_SND=y
> +CONFIG_SND_TIMER=y
> +CONFIG_SND_PCM=y
> +CONFIG_SND_JACK=y
> +CONFIG_SND_SEQUENCER=y
> +# CONFIG_SND_SEQ_DUMMY is not set
> +CONFIG_SND_OSSEMUL=y
> +CONFIG_SND_MIXER_OSS=y
> +CONFIG_SND_PCM_OSS=y
> +CONFIG_SND_PCM_OSS_PLUGINS=y
> +# CONFIG_SND_SEQUENCER_OSS is not set
> +# CONFIG_SND_HRTIMER is not set
> +# CONFIG_SND_DYNAMIC_MINORS is not set
> +# CONFIG_SND_SUPPORT_OLD_API is not set
> +# CONFIG_SND_VERBOSE_PROCFS is not set
> +# CONFIG_SND_VERBOSE_PRINTK is not set
> +# CONFIG_SND_DEBUG is not set
> +# CONFIG_SND_RAWMIDI_SEQ is not set
> +# CONFIG_SND_OPL3_LIB_SEQ is not set
> +# CONFIG_SND_OPL4_LIB_SEQ is not set
> +# CONFIG_SND_SBAWE_SEQ is not set
> +# CONFIG_SND_EMU10K1_SEQ is not set
> +# CONFIG_SND_DRIVERS is not set
> +# CONFIG_SND_ARM is not set
> +
> +#
> +# Atmel devices (AVR32 and AT91)
> +#
> +# CONFIG_SND_ATMEL_AC97C is not set
> +# CONFIG_SND_SPI is not set
> +# CONFIG_SND_USB is not set
> +CONFIG_SND_SOC=y
> +# CONFIG_SND_SOC_CACHE_LZO is not set
> +CONFIG_SND_ATMEL_SOC=y
> +CONFIG_SND_ATMEL_SOC_SSC=y
> +CONFIG_SND_AT91_SOC_SAM9N12EK_WM8904=y
> +CONFIG_SND_SOC_I2C_AND_SPI=y
> +# CONFIG_SND_SOC_ALL_CODECS is not set
> +CONFIG_SND_SOC_WM8904=y
> +# CONFIG_SOUND_PRIME is not set
> +CONFIG_HID_SUPPORT=y
> +CONFIG_HID=y
> +# CONFIG_HIDRAW is not set
> +
> +#
> +# USB Input Devices
> +#
> +CONFIG_USB_HID=y
> +# CONFIG_HID_PID is not set
> +# CONFIG_USB_HIDDEV is not set
> +
> +#
> +# Special HID drivers
> +#
> +# CONFIG_HID_3M_PCT is not set
> +# CONFIG_HID_A4TECH is not set
> +# CONFIG_HID_ACRUX is not set
> +# CONFIG_HID_APPLE is not set
> +# CONFIG_HID_BELKIN is not set
> +# CONFIG_HID_CANDO is not set
> +# CONFIG_HID_CHERRY is not set
> +# CONFIG_HID_CHICONY is not set
> +# CONFIG_HID_PRODIKEYS is not set
> +# CONFIG_HID_CYPRESS is not set
> +# CONFIG_HID_DRAGONRISE is not set
> +# CONFIG_HID_EMS_FF is not set
> +# CONFIG_HID_EZKEY is not set
> +# CONFIG_HID_KEYTOUCH is not set
> +# CONFIG_HID_KYE is not set
> +# CONFIG_HID_UCLOGIC is not set
> +# CONFIG_HID_WALTOP is not set
> +# CONFIG_HID_GYRATION is not set
> +# CONFIG_HID_TWINHAN is not set
> +# CONFIG_HID_KENSINGTON is not set
> +# CONFIG_HID_LCPOWER is not set
> +# CONFIG_HID_LOGITECH is not set
> +# CONFIG_HID_MICROSOFT is not set
> +# CONFIG_HID_MOSART is not set
> +# CONFIG_HID_MONTEREY is not set
> +# CONFIG_HID_MULTITOUCH is not set
> +# CONFIG_HID_NTRIG is not set
> +# CONFIG_HID_ORTEK is not set
> +# CONFIG_HID_PANTHERLORD is not set
> +# CONFIG_HID_PETALYNX is not set
> +# CONFIG_HID_PICOLCD is not set
> +# CONFIG_HID_QUANTA is not set
> +# CONFIG_HID_ROCCAT is not set
> +# CONFIG_HID_ROCCAT_ARVO is not set
> +# CONFIG_HID_ROCCAT_KONE is not set
> +# CONFIG_HID_ROCCAT_KONEPLUS is not set
> +# CONFIG_HID_ROCCAT_KOVAPLUS is not set
> +# CONFIG_HID_ROCCAT_PYRA is not set
> +# CONFIG_HID_SAMSUNG is not set
> +# CONFIG_HID_SONY is not set
> +# CONFIG_HID_STANTUM is not set
> +# CONFIG_HID_SUNPLUS is not set
> +# CONFIG_HID_GREENASIA is not set
> +# CONFIG_HID_SMARTJOYPLUS is not set
> +# CONFIG_HID_TOPSEED is not set
> +# CONFIG_HID_THRUSTMASTER is not set
> +# CONFIG_HID_ZEROPLUS is not set
> +# CONFIG_HID_ZYDACRON is not set
> +CONFIG_USB_SUPPORT=y
> +CONFIG_USB_ARCH_HAS_HCD=y
> +CONFIG_USB_ARCH_HAS_OHCI=y
> +# CONFIG_USB_ARCH_HAS_EHCI is not set
> +CONFIG_USB=y
> +# CONFIG_USB_DEBUG is not set
> +# CONFIG_USB_ANNOUNCE_NEW_DEVICES is not set
> +
> +#
> +# Miscellaneous USB options
> +#
> +# CONFIG_USB_DEVICEFS is not set
> +# CONFIG_USB_DEVICE_CLASS is not set
> +# CONFIG_USB_DYNAMIC_MINORS is not set
> +# CONFIG_USB_OTG_WHITELIST is not set
> +# CONFIG_USB_OTG_BLACKLIST_HUB is not set
> +# CONFIG_USB_MON is not set
> +# CONFIG_USB_WUSB is not set
> +# CONFIG_USB_WUSB_CBAF is not set
> +
> +#
> +# USB Host Controller Drivers
> +#
> +# CONFIG_USB_C67X00_HCD is not set
> +# CONFIG_USB_OXU210HP_HCD is not set
> +# CONFIG_USB_ISP116X_HCD is not set
> +# CONFIG_USB_ISP1760_HCD is not set
> +# CONFIG_USB_ISP1362_HCD is not set
> +CONFIG_USB_OHCI_HCD=y
> +# CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set
> +# CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set
> +CONFIG_USB_OHCI_LITTLE_ENDIAN=y
> +# CONFIG_USB_SL811_HCD is not set
> +# CONFIG_USB_R8A66597_HCD is not set
> +# CONFIG_USB_HWA_HCD is not set
> +# CONFIG_USB_MUSB_HDRC is not set
> +
> +#
> +# USB Device Class drivers
> +#
> +# CONFIG_USB_ACM is not set
> +# CONFIG_USB_PRINTER is not set
> +# CONFIG_USB_WDM is not set
> +# CONFIG_USB_TMC is not set
> +
> +#
> +# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may
> +#
> +
> +#
> +# also be needed; see USB_STORAGE Help for more info
> +#
> +CONFIG_USB_STORAGE=y
> +# CONFIG_USB_STORAGE_DEBUG is not set
> +# CONFIG_USB_STORAGE_REALTEK is not set
> +# CONFIG_USB_STORAGE_DATAFAB is not set
> +# CONFIG_USB_STORAGE_FREECOM is not set
> +# CONFIG_USB_STORAGE_ISD200 is not set
> +# CONFIG_USB_STORAGE_USBAT is not set
> +# CONFIG_USB_STORAGE_SDDR09 is not set
> +# CONFIG_USB_STORAGE_SDDR55 is not set
> +# CONFIG_USB_STORAGE_JUMPSHOT is not set
> +# CONFIG_USB_STORAGE_ALAUDA is not set
> +# CONFIG_USB_STORAGE_ONETOUCH is not set
> +# CONFIG_USB_STORAGE_KARMA is not set
> +# CONFIG_USB_STORAGE_CYPRESS_ATACB is not set
> +# CONFIG_USB_STORAGE_ENE_UB6250 is not set
> +# CONFIG_USB_UAS is not set
> +CONFIG_USB_LIBUSUAL=y
> +
> +#
> +# USB Imaging devices
> +#
> +# CONFIG_USB_MDC800 is not set
> +# CONFIG_USB_MICROTEK is not set
> +
> +#
> +# USB port drivers
> +#
> +# CONFIG_USB_SERIAL is not set
> +
> +#
> +# USB Miscellaneous drivers
> +#
> +# CONFIG_USB_EMI62 is not set
> +# CONFIG_USB_EMI26 is not set
> +# CONFIG_USB_ADUTUX is not set
> +# CONFIG_USB_SEVSEG is not set
> +# CONFIG_USB_RIO500 is not set
> +# CONFIG_USB_LEGOTOWER is not set
> +# CONFIG_USB_LCD is not set
> +# CONFIG_USB_LED is not set
> +# CONFIG_USB_CYPRESS_CY7C63 is not set
> +# CONFIG_USB_CYTHERM is not set
> +# CONFIG_USB_IDMOUSE is not set
> +# CONFIG_USB_FTDI_ELAN is not set
> +# CONFIG_USB_APPLEDISPLAY is not set
> +# CONFIG_USB_LD is not set
> +# CONFIG_USB_TRANCEVIBRATOR is not set
> +# CONFIG_USB_IOWARRIOR is not set
> +# CONFIG_USB_TEST is not set
> +# CONFIG_USB_ISIGHTFW is not set
> +# CONFIG_USB_YUREX is not set
> +CONFIG_USB_GADGET=y
> +# CONFIG_USB_GADGET_DEBUG is not set
> +# CONFIG_USB_GADGET_DEBUG_FILES is not set
> +# CONFIG_USB_GADGET_DEBUG_FS is not set
> +CONFIG_USB_GADGET_VBUS_DRAW=2
> +CONFIG_USB_GADGET_SELECTED=y
> +CONFIG_USB_GADGET_AT91=y
> +CONFIG_USB_AT91=y
> +# CONFIG_USB_GADGET_FUSB300 is not set
> +# CONFIG_USB_GADGET_R8A66597 is not set
> +# CONFIG_USB_GADGET_PXA_U2O is not set
> +# CONFIG_USB_GADGET_M66592 is not set
> +# CONFIG_USB_GADGET_DUMMY_HCD is not set
> +# CONFIG_USB_GADGET_DUALSPEED is not set
> +CONFIG_USB_ZERO=m
> +# CONFIG_USB_AUDIO is not set
> +CONFIG_USB_ETH=m
> +CONFIG_USB_ETH_RNDIS=y
> +# CONFIG_USB_ETH_EEM is not set
> +# CONFIG_USB_G_NCM is not set
> +# CONFIG_USB_GADGETFS is not set
> +# CONFIG_USB_FUNCTIONFS is not set
> +CONFIG_USB_FILE_STORAGE=m
> +# CONFIG_USB_FILE_STORAGE_TEST is not set
> +CONFIG_USB_MASS_STORAGE=m
> +CONFIG_USB_G_SERIAL=m
> +# CONFIG_USB_MIDI_GADGET is not set
> +# CONFIG_USB_G_PRINTER is not set
> +CONFIG_USB_CDC_COMPOSITE=m
> +CONFIG_USB_G_MULTI=m
> +CONFIG_USB_G_MULTI_RNDIS=y
> +CONFIG_USB_G_MULTI_CDC=y
> +# CONFIG_USB_G_HID is not set
> +# CONFIG_USB_G_DBGP is not set
> +
> +#
> +# OTG and related infrastructure
> +#
> +# CONFIG_USB_GPIO_VBUS is not set
> +# CONFIG_USB_ULPI is not set
> +# CONFIG_NOP_USB_XCEIV is not set
> +CONFIG_MMC=y
> +# CONFIG_MMC_DEBUG is not set
> +# CONFIG_MMC_UNSAFE_RESUME is not set
> +# CONFIG_MMC_CLKGATE is not set
> +
> +#
> +# MMC/SD/SDIO Card Drivers
> +#
> +CONFIG_MMC_BLOCK=y
> +CONFIG_MMC_BLOCK_MINORS=8
> +# CONFIG_MMC_BLOCK_BOUNCE is not set
> +# CONFIG_SDIO_UART is not set
> +# CONFIG_MMC_TEST is not set
> +
> +#
> +# MMC/SD/SDIO Host Controller Drivers
> +#
> +# CONFIG_MMC_SDHCI is not set
> +# CONFIG_MMC_AT91 is not set
> +CONFIG_MMC_ATMELMCI=y
> +CONFIG_MMC_ATMELMCI_DMA=y
> +# CONFIG_MMC_SPI is not set
> +# CONFIG_MMC_DW is not set
> +# CONFIG_MMC_USHC is not set
> +# CONFIG_MEMSTICK is not set
> +CONFIG_NEW_LEDS=y
> +CONFIG_LEDS_CLASS=y
> +
> +#
> +# LED drivers
> +#
> +# CONFIG_LEDS_LM3530 is not set
> +# CONFIG_LEDS_PCA9532 is not set
> +CONFIG_LEDS_GPIO=y
> +CONFIG_LEDS_GPIO_PLATFORM=y
> +# CONFIG_LEDS_LP3944 is not set
> +# CONFIG_LEDS_LP5521 is not set
> +# CONFIG_LEDS_LP5523 is not set
> +# CONFIG_LEDS_PCA955X is not set
> +# CONFIG_LEDS_DAC124S085 is not set
> +# CONFIG_LEDS_BD2802 is not set
> +# CONFIG_LEDS_LT3593 is not set
> +CONFIG_LEDS_TRIGGERS=y
> +
> +#
> +# LED Triggers
> +#
> +CONFIG_LEDS_TRIGGER_TIMER=y
> +CONFIG_LEDS_TRIGGER_HEARTBEAT=y
> +# CONFIG_LEDS_TRIGGER_BACKLIGHT is not set
> +CONFIG_LEDS_TRIGGER_GPIO=y
> +# CONFIG_LEDS_TRIGGER_DEFAULT_ON is not set
> +
> +#
> +# iptables trigger is under Netfilter config (LED target)
> +#
> +# CONFIG_NFC_DEVICES is not set
> +# CONFIG_ACCESSIBILITY is not set
> +CONFIG_RTC_LIB=y
> +CONFIG_RTC_CLASS=y
> +CONFIG_RTC_HCTOSYS=y
> +CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
> +# CONFIG_RTC_DEBUG is not set
> +
> +#
> +# RTC interfaces
> +#
> +CONFIG_RTC_INTF_SYSFS=y
> +CONFIG_RTC_INTF_PROC=y
> +CONFIG_RTC_INTF_DEV=y
> +# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
> +# CONFIG_RTC_DRV_TEST is not set
> +
> +#
> +# I2C RTC drivers
> +#
> +# CONFIG_RTC_DRV_DS1307 is not set
> +# CONFIG_RTC_DRV_DS1374 is not set
> +# CONFIG_RTC_DRV_DS1672 is not set
> +# CONFIG_RTC_DRV_DS3232 is not set
> +# CONFIG_RTC_DRV_MAX6900 is not set
> +# CONFIG_RTC_DRV_RS5C372 is not set
> +# CONFIG_RTC_DRV_ISL1208 is not set
> +# CONFIG_RTC_DRV_ISL12022 is not set
> +# CONFIG_RTC_DRV_X1205 is not set
> +# CONFIG_RTC_DRV_PCF8563 is not set
> +# CONFIG_RTC_DRV_PCF8583 is not set
> +# CONFIG_RTC_DRV_M41T80 is not set
> +# CONFIG_RTC_DRV_BQ32K is not set
> +# CONFIG_RTC_DRV_S35390A is not set
> +# CONFIG_RTC_DRV_FM3130 is not set
> +# CONFIG_RTC_DRV_RX8581 is not set
> +# CONFIG_RTC_DRV_RX8025 is not set
> +
> +#
> +# SPI RTC drivers
> +#
> +# CONFIG_RTC_DRV_M41T94 is not set
> +# CONFIG_RTC_DRV_DS1305 is not set
> +# CONFIG_RTC_DRV_DS1390 is not set
> +# CONFIG_RTC_DRV_MAX6902 is not set
> +# CONFIG_RTC_DRV_R9701 is not set
> +# CONFIG_RTC_DRV_RS5C348 is not set
> +# CONFIG_RTC_DRV_DS3234 is not set
> +# CONFIG_RTC_DRV_PCF2123 is not set
> +
> +#
> +# Platform RTC drivers
> +#
> +# CONFIG_RTC_DRV_CMOS is not set
> +# CONFIG_RTC_DRV_DS1286 is not set
> +# CONFIG_RTC_DRV_DS1511 is not set
> +# CONFIG_RTC_DRV_DS1553 is not set
> +# CONFIG_RTC_DRV_DS1742 is not set
> +# CONFIG_RTC_DRV_STK17TA8 is not set
> +# CONFIG_RTC_DRV_M48T86 is not set
> +# CONFIG_RTC_DRV_M48T35 is not set
> +# CONFIG_RTC_DRV_M48T59 is not set
> +# CONFIG_RTC_DRV_MSM6242 is not set
> +# CONFIG_RTC_DRV_BQ4802 is not set
> +# CONFIG_RTC_DRV_RP5C01 is not set
> +# CONFIG_RTC_DRV_V3020 is not set
> +
> +#
> +# on-CPU RTC drivers
> +#
> +CONFIG_RTC_DRV_AT91RM9200=y
> +CONFIG_DMADEVICES=y
> +# CONFIG_DMADEVICES_DEBUG is not set
> +
> +#
> +# DMA Devices
> +#
> +# CONFIG_DW_DMAC is not set
> +CONFIG_AT_HDMAC=y
> +# CONFIG_TIMB_DMA is not set
> +CONFIG_DMA_ENGINE=y
> +
> +#
> +# DMA Clients
> +#
> +# CONFIG_NET_DMA is not set
> +# CONFIG_ASYNC_TX_DMA is not set
> +CONFIG_DMATEST=m
> +# CONFIG_AUXDISPLAY is not set
> +# CONFIG_UIO is not set
> +# CONFIG_STAGING is not set
> +
> +#
> +# File systems
> +#
> +CONFIG_EXT2_FS=y
> +# CONFIG_EXT2_FS_XATTR is not set
> +# CONFIG_EXT2_FS_XIP is not set
> +# CONFIG_EXT3_FS is not set
> +# CONFIG_EXT4_FS is not set
> +# CONFIG_REISERFS_FS is not set
> +# CONFIG_JFS_FS is not set
> +# CONFIG_XFS_FS is not set
> +# CONFIG_BTRFS_FS is not set
> +# CONFIG_NILFS2_FS is not set
> +# CONFIG_FS_POSIX_ACL is not set
> +CONFIG_FILE_LOCKING=y
> +CONFIG_FSNOTIFY=y
> +CONFIG_DNOTIFY=y
> +CONFIG_INOTIFY_USER=y
> +CONFIG_FANOTIFY=y
> +# CONFIG_QUOTA is not set
> +# CONFIG_QUOTACTL is not set
> +# CONFIG_AUTOFS4_FS is not set
> +# CONFIG_FUSE_FS is not set
> +
> +#
> +# Caches
> +#
> +# CONFIG_FSCACHE is not set
> +
> +#
> +# CD-ROM/DVD Filesystems
> +#
> +# CONFIG_ISO9660_FS is not set
> +# CONFIG_UDF_FS is not set
> +
> +#
> +# DOS/FAT/NT Filesystems
> +#
> +CONFIG_FAT_FS=y
> +CONFIG_MSDOS_FS=y
> +CONFIG_VFAT_FS=y
> +CONFIG_FAT_DEFAULT_CODEPAGE=437
> +CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
> +# CONFIG_NTFS_FS is not set
> +
> +#
> +# Pseudo filesystems
> +#
> +CONFIG_PROC_FS=y
> +CONFIG_PROC_SYSCTL=y
> +CONFIG_PROC_PAGE_MONITOR=y
> +CONFIG_SYSFS=y
> +CONFIG_TMPFS=y
> +# CONFIG_TMPFS_POSIX_ACL is not set
> +# CONFIG_HUGETLB_PAGE is not set
> +# CONFIG_CONFIGFS_FS is not set
> +CONFIG_MISC_FILESYSTEMS=y
> +# CONFIG_ADFS_FS is not set
> +# CONFIG_AFFS_FS is not set
> +# CONFIG_ECRYPT_FS is not set
> +# CONFIG_HFS_FS is not set
> +# CONFIG_HFSPLUS_FS is not set
> +# CONFIG_BEFS_FS is not set
> +# CONFIG_BFS_FS is not set
> +# CONFIG_EFS_FS is not set
> +CONFIG_JFFS2_FS=y
> +CONFIG_JFFS2_FS_DEBUG=0
> +CONFIG_JFFS2_FS_WRITEBUFFER=y
> +# CONFIG_JFFS2_FS_WBUF_VERIFY is not set
> +CONFIG_JFFS2_SUMMARY=y
> +# CONFIG_JFFS2_FS_XATTR is not set
> +# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
> +CONFIG_JFFS2_ZLIB=y
> +# CONFIG_JFFS2_LZO is not set
> +CONFIG_JFFS2_RTIME=y
> +# CONFIG_JFFS2_RUBIN is not set
> +CONFIG_UBIFS_FS=y
> +CONFIG_UBIFS_FS_XATTR=y
> +CONFIG_UBIFS_FS_ADVANCED_COMPR=y
> +CONFIG_UBIFS_FS_LZO=y
> +CONFIG_UBIFS_FS_ZLIB=y
> +# CONFIG_UBIFS_FS_DEBUG is not set
> +# CONFIG_LOGFS is not set
> +CONFIG_CRAMFS=y
> +# CONFIG_SQUASHFS is not set
> +# CONFIG_VXFS_FS is not set
> +# CONFIG_MINIX_FS is not set
> +# CONFIG_OMFS_FS is not set
> +# CONFIG_HPFS_FS is not set
> +# CONFIG_QNX4FS_FS is not set
> +# CONFIG_ROMFS_FS is not set
> +# CONFIG_PSTORE is not set
> +# CONFIG_SYSV_FS is not set
> +# CONFIG_UFS_FS is not set
> +CONFIG_NETWORK_FILESYSTEMS=y
> +CONFIG_NFS_FS=y
> +CONFIG_NFS_V3=y
> +# CONFIG_NFS_V3_ACL is not set
> +# CONFIG_NFS_V4 is not set
> +CONFIG_ROOT_NFS=y
> +# CONFIG_NFSD is not set
> +CONFIG_LOCKD=y
> +CONFIG_LOCKD_V4=y
> +CONFIG_NFS_COMMON=y
> +CONFIG_SUNRPC=y
> +# CONFIG_CEPH_FS is not set
> +# CONFIG_CIFS is not set
> +# CONFIG_NCP_FS is not set
> +# CONFIG_CODA_FS is not set
> +# CONFIG_AFS_FS is not set
> +
> +#
> +# Partition Types
> +#
> +# CONFIG_PARTITION_ADVANCED is not set
> +CONFIG_MSDOS_PARTITION=y
> +CONFIG_NLS=y
> +CONFIG_NLS_DEFAULT="iso8859-1"
> +CONFIG_NLS_CODEPAGE_437=y
> +# CONFIG_NLS_CODEPAGE_737 is not set
> +# CONFIG_NLS_CODEPAGE_775 is not set
> +CONFIG_NLS_CODEPAGE_850=y
> +# CONFIG_NLS_CODEPAGE_852 is not set
> +# CONFIG_NLS_CODEPAGE_855 is not set
> +# CONFIG_NLS_CODEPAGE_857 is not set
> +# CONFIG_NLS_CODEPAGE_860 is not set
> +# CONFIG_NLS_CODEPAGE_861 is not set
> +# CONFIG_NLS_CODEPAGE_862 is not set
> +# CONFIG_NLS_CODEPAGE_863 is not set
> +# CONFIG_NLS_CODEPAGE_864 is not set
> +# CONFIG_NLS_CODEPAGE_865 is not set
> +# CONFIG_NLS_CODEPAGE_866 is not set
> +# CONFIG_NLS_CODEPAGE_869 is not set
> +# CONFIG_NLS_CODEPAGE_936 is not set
> +# CONFIG_NLS_CODEPAGE_950 is not set
> +# CONFIG_NLS_CODEPAGE_932 is not set
> +# CONFIG_NLS_CODEPAGE_949 is not set
> +# CONFIG_NLS_CODEPAGE_874 is not set
> +# CONFIG_NLS_ISO8859_8 is not set
> +# CONFIG_NLS_CODEPAGE_1250 is not set
> +# CONFIG_NLS_CODEPAGE_1251 is not set
> +# CONFIG_NLS_ASCII is not set
> +CONFIG_NLS_ISO8859_1=y
> +# CONFIG_NLS_ISO8859_2 is not set
> +# CONFIG_NLS_ISO8859_3 is not set
> +# CONFIG_NLS_ISO8859_4 is not set
> +# CONFIG_NLS_ISO8859_5 is not set
> +# CONFIG_NLS_ISO8859_6 is not set
> +# CONFIG_NLS_ISO8859_7 is not set
> +# CONFIG_NLS_ISO8859_9 is not set
> +# CONFIG_NLS_ISO8859_13 is not set
> +# CONFIG_NLS_ISO8859_14 is not set
> +CONFIG_NLS_ISO8859_15=y
> +# CONFIG_NLS_KOI8_R is not set
> +# CONFIG_NLS_KOI8_U is not set
> +CONFIG_NLS_UTF8=y
> +
> +#
> +# Kernel hacking
> +#
> +# CONFIG_PRINTK_TIME is not set
> +CONFIG_DEFAULT_MESSAGE_LOGLEVEL=4
> +CONFIG_ENABLE_WARN_DEPRECATED=y
> +CONFIG_ENABLE_MUST_CHECK=y
> +CONFIG_FRAME_WARN=1024
> +# CONFIG_MAGIC_SYSRQ is not set
> +# CONFIG_STRIP_ASM_SYMS is not set
> +# CONFIG_UNUSED_SYMBOLS is not set
> +CONFIG_DEBUG_FS=y
> +# CONFIG_HEADERS_CHECK is not set
> +# CONFIG_DEBUG_SECTION_MISMATCH is not set
> +CONFIG_DEBUG_KERNEL=y
> +# CONFIG_DEBUG_SHIRQ is not set
> +# CONFIG_LOCKUP_DETECTOR is not set
> +# CONFIG_HARDLOCKUP_DETECTOR is not set
> +# CONFIG_DETECT_HUNG_TASK is not set
> +# CONFIG_SCHED_DEBUG is not set
> +# CONFIG_SCHEDSTATS is not set
> +# CONFIG_TIMER_STATS is not set
> +# CONFIG_DEBUG_OBJECTS is not set
> +# CONFIG_DEBUG_SLAB is not set
> +# CONFIG_DEBUG_KMEMLEAK is not set
> +# CONFIG_DEBUG_RT_MUTEXES is not set
> +# CONFIG_RT_MUTEX_TESTER is not set
> +# CONFIG_DEBUG_SPINLOCK is not set
> +# CONFIG_DEBUG_MUTEXES is not set
> +# CONFIG_DEBUG_LOCK_ALLOC is not set
> +# CONFIG_PROVE_LOCKING is not set
> +# CONFIG_SPARSE_RCU_POINTER is not set
> +# CONFIG_LOCK_STAT is not set
> +# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
> +# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
> +# CONFIG_DEBUG_KOBJECT is not set
> +# CONFIG_DEBUG_BUGVERBOSE is not set
> +# CONFIG_DEBUG_INFO is not set
> +# CONFIG_DEBUG_VM is not set
> +# CONFIG_DEBUG_WRITECOUNT is not set
> +# CONFIG_DEBUG_MEMORY_INIT is not set
> +# CONFIG_DEBUG_LIST is not set
> +# CONFIG_TEST_LIST_SORT is not set
> +# CONFIG_DEBUG_SG is not set
> +# CONFIG_DEBUG_NOTIFIERS is not set
> +# CONFIG_DEBUG_CREDENTIALS is not set
> +CONFIG_FRAME_POINTER=y
> +# CONFIG_BOOT_PRINTK_DELAY is not set
> +# CONFIG_RCU_TORTURE_TEST is not set
> +# CONFIG_BACKTRACE_SELF_TEST is not set
> +# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
> +# CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set
> +# CONFIG_LKDTM is not set
> +# CONFIG_FAULT_INJECTION is not set
> +# CONFIG_LATENCYTOP is not set
> +# CONFIG_SYSCTL_SYSCALL_CHECK is not set
> +# CONFIG_DEBUG_PAGEALLOC is not set
> +CONFIG_HAVE_FUNCTION_TRACER=y
> +CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
> +CONFIG_HAVE_DYNAMIC_FTRACE=y
> +CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
> +CONFIG_HAVE_C_RECORDMCOUNT=y
> +CONFIG_TRACING_SUPPORT=y
> +# CONFIG_FTRACE is not set
> +# CONFIG_DYNAMIC_DEBUG is not set
> +# CONFIG_DMA_API_DEBUG is not set
> +# CONFIG_ATOMIC64_SELFTEST is not set
> +# CONFIG_SAMPLES is not set
> +CONFIG_HAVE_ARCH_KGDB=y
> +# CONFIG_KGDB is not set
> +# CONFIG_TEST_KSTRTOX is not set
> +# CONFIG_STRICT_DEVMEM is not set
> +# CONFIG_ARM_UNWIND is not set
> +# CONFIG_DEBUG_USER is not set
> +# CONFIG_DEBUG_STACK_USAGE is not set
> +CONFIG_DEBUG_LL=y
> +# CONFIG_EARLY_PRINTK is not set
> +# CONFIG_DEBUG_ICEDCC is not set
> +# CONFIG_OC_ETM is not set
> +
> +#
> +# Security options
> +#
> +CONFIG_KEYS=y
> +# CONFIG_KEYS_DEBUG_PROC_KEYS is not set
> +# CONFIG_SECURITY_DMESG_RESTRICT is not set
> +# CONFIG_SECURITY is not set
> +# CONFIG_SECURITYFS is not set
> +CONFIG_DEFAULT_SECURITY_DAC=y
> +CONFIG_DEFAULT_SECURITY=""
> +CONFIG_CRYPTO=y
> +
> +#
> +# Crypto core or helper
> +#
> +CONFIG_CRYPTO_ALGAPI=y
> +CONFIG_CRYPTO_ALGAPI2=y
> +CONFIG_CRYPTO_AEAD2=y
> +CONFIG_CRYPTO_BLKCIPHER=y
> +CONFIG_CRYPTO_BLKCIPHER2=y
> +CONFIG_CRYPTO_HASH=y
> +CONFIG_CRYPTO_HASH2=y
> +CONFIG_CRYPTO_RNG=m
> +CONFIG_CRYPTO_RNG2=y
> +CONFIG_CRYPTO_PCOMP2=y
> +CONFIG_CRYPTO_MANAGER=y
> +CONFIG_CRYPTO_MANAGER2=y
> +CONFIG_CRYPTO_MANAGER_DISABLE_TESTS=y
> +# CONFIG_CRYPTO_GF128MUL is not set
> +# CONFIG_CRYPTO_NULL is not set
> +CONFIG_CRYPTO_WORKQUEUE=y
> +# CONFIG_CRYPTO_CRYPTD is not set
> +# CONFIG_CRYPTO_AUTHENC is not set
> +# CONFIG_CRYPTO_TEST is not set
> +
> +#
> +# Authenticated Encryption with Associated Data
> +#
> +# CONFIG_CRYPTO_CCM is not set
> +# CONFIG_CRYPTO_GCM is not set
> +# CONFIG_CRYPTO_SEQIV is not set
> +
> +#
> +# Block modes
> +#
> +CONFIG_CRYPTO_CBC=y
> +# CONFIG_CRYPTO_CTR is not set
> +# CONFIG_CRYPTO_CTS is not set
> +CONFIG_CRYPTO_ECB=y
> +# CONFIG_CRYPTO_LRW is not set
> +# CONFIG_CRYPTO_PCBC is not set
> +# CONFIG_CRYPTO_XTS is not set
> +
> +#
> +# Hash modes
> +#
> +# CONFIG_CRYPTO_HMAC is not set
> +# CONFIG_CRYPTO_XCBC is not set
> +# CONFIG_CRYPTO_VMAC is not set
> +
> +#
> +# Digest
> +#
> +# CONFIG_CRYPTO_CRC32C is not set
> +# CONFIG_CRYPTO_GHASH is not set
> +# CONFIG_CRYPTO_MD4 is not set
> +CONFIG_CRYPTO_MD5=y
> +# CONFIG_CRYPTO_MICHAEL_MIC is not set
> +# CONFIG_CRYPTO_RMD128 is not set
> +# CONFIG_CRYPTO_RMD160 is not set
> +# CONFIG_CRYPTO_RMD256 is not set
> +# CONFIG_CRYPTO_RMD320 is not set
> +# CONFIG_CRYPTO_SHA1 is not set
> +# CONFIG_CRYPTO_SHA256 is not set
> +# CONFIG_CRYPTO_SHA512 is not set
> +# CONFIG_CRYPTO_TGR192 is not set
> +# CONFIG_CRYPTO_WP512 is not set
> +
> +#
> +# Ciphers
> +#
> +CONFIG_CRYPTO_AES=y
> +# CONFIG_CRYPTO_ANUBIS is not set
> +CONFIG_CRYPTO_ARC4=y
> +# CONFIG_CRYPTO_BLOWFISH is not set
> +# CONFIG_CRYPTO_CAMELLIA is not set
> +# CONFIG_CRYPTO_CAST5 is not set
> +# CONFIG_CRYPTO_CAST6 is not set
> +CONFIG_CRYPTO_DES=y
> +# CONFIG_CRYPTO_FCRYPT is not set
> +# CONFIG_CRYPTO_KHAZAD is not set
> +# CONFIG_CRYPTO_SALSA20 is not set
> +# CONFIG_CRYPTO_SEED is not set
> +# CONFIG_CRYPTO_SERPENT is not set
> +# CONFIG_CRYPTO_TEA is not set
> +# CONFIG_CRYPTO_TWOFISH is not set
> +
> +#
> +# Compression
> +#
> +CONFIG_CRYPTO_DEFLATE=y
> +# CONFIG_CRYPTO_ZLIB is not set
> +CONFIG_CRYPTO_LZO=y
> +
> +#
> +# Random Number Generation
> +#
> +CONFIG_CRYPTO_ANSI_CPRNG=m
> +# CONFIG_CRYPTO_USER_API_HASH is not set
> +# CONFIG_CRYPTO_USER_API_SKCIPHER is not set
> +# CONFIG_CRYPTO_HW is not set
> +# CONFIG_BINARY_PRINTF is not set
> +
> +#
> +# Library routines
> +#
> +CONFIG_BITREVERSE=y
> +CONFIG_GENERIC_FIND_LAST_BIT=y
> +CONFIG_CRC_CCITT=m
> +CONFIG_CRC16=y
> +# CONFIG_CRC_T10DIF is not set
> +CONFIG_CRC_ITU_T=m
> +CONFIG_CRC32=y
> +CONFIG_CRC7=m
> +# CONFIG_LIBCRC32C is not set
> +CONFIG_ZLIB_INFLATE=y
> +CONFIG_ZLIB_DEFLATE=y
> +CONFIG_LZO_COMPRESS=y
> +CONFIG_LZO_DECOMPRESS=y
> +# CONFIG_XZ_DEC is not set
> +# CONFIG_XZ_DEC_BCJ is not set
> +CONFIG_DECOMPRESS_GZIP=y
> +CONFIG_DECOMPRESS_BZIP2=y
> +CONFIG_HAS_IOMEM=y
> +CONFIG_HAS_IOPORT=y
> +CONFIG_HAS_DMA=y
> +CONFIG_NLATTR=y
> +CONFIG_GENERIC_ATOMIC64=y
> +CONFIG_AVERAGE=y
--
Nicolas Ferre
^ permalink raw reply [flat|nested] 14+ messages in thread
* [PATCH 3/4] AT91: Add machine files for AT91SAM9N12 SoC
2012-04-12 6:26 ` [PATCH 3/4] AT91: Add machine files " Hong Xu
@ 2012-04-13 16:27 ` Nicolas Ferre
2012-04-16 2:35 ` Xu, Hong
0 siblings, 1 reply; 14+ messages in thread
From: Nicolas Ferre @ 2012-04-13 16:27 UTC (permalink / raw)
To: linux-arm-kernel
On 04/12/2012 08:26 AM, Hong Xu :
> Signed-off-by: Hong Xu <hong.xu@atmel.com>
> ---
> arch/arm/mach-at91/Kconfig | 9 ++
> arch/arm/mach-at91/Makefile | 1 +
An entry is missing in:
arch/arm/mach-at91/Makefile.boot
> arch/arm/mach-at91/at91sam9n12.c | 275 ++++++++++++++++++++++++++++++++++++++
> arch/arm/mach-at91/board-dt.c | 1 +
> arch/arm/mach-at91/clock.c | 15 ++-
> arch/arm/mach-at91/setup.c | 6 +
> 6 files changed, 302 insertions(+), 5 deletions(-)
> create mode 100644 arch/arm/mach-at91/at91sam9n12.c
>
> diff --git a/arch/arm/mach-at91/Kconfig b/arch/arm/mach-at91/Kconfig
> index 45db05d..8fc8fb4 100644
> --- a/arch/arm/mach-at91/Kconfig
> +++ b/arch/arm/mach-at91/Kconfig
> @@ -105,6 +105,15 @@ config ARCH_AT91SAM9X5
> select HAVE_NET_MACB
> select HAVE_AT91_DBGU0
>
> +config ARCH_AT91SAM9N12
> + bool "AT91SAM9N12 SoC"
> + select CPU_ARM926T
> + select GENERIC_CLOCKEVENTS
> + select HAVE_FB_ATMEL
> + select HAVE_AT91_DBGU0
> + help
> + Select this if you are using Atmel's AT91SAM9N12 SoC.
> +
> config ARCH_AT91X40
> bool "AT91x40"
> select ARCH_USES_GETTIMEOFFSET
> diff --git a/arch/arm/mach-at91/Makefile b/arch/arm/mach-at91/Makefile
> index 8512e53..7ab5f5f 100644
> --- a/arch/arm/mach-at91/Makefile
> +++ b/arch/arm/mach-at91/Makefile
> @@ -21,6 +21,7 @@ obj-$(CONFIG_ARCH_AT91SAM9RL) += at91sam9rl.o at91sam926x_time.o at91sam9rl_devi
> obj-$(CONFIG_ARCH_AT91SAM9G20) += at91sam9260.o at91sam926x_time.o at91sam9260_devices.o sam9_smc.o
> obj-$(CONFIG_ARCH_AT91SAM9G45) += at91sam9g45.o at91sam926x_time.o at91sam9g45_devices.o sam9_smc.o
> obj-$(CONFIG_ARCH_AT91SAM9X5) += at91sam9x5.o at91sam926x_time.o sam9_smc.o
> +obj-$(CONFIG_ARCH_AT91SAM9N12) += at91sam9n12.o at91sam926x_time.o sam9_smc.o
> obj-$(CONFIG_ARCH_AT91X40) += at91x40.o at91x40_time.o
>
> # AT91RM9200 board-specific support
> diff --git a/arch/arm/mach-at91/at91sam9n12.c b/arch/arm/mach-at91/at91sam9n12.c
> new file mode 100644
> index 0000000..5187b95
> --- /dev/null
> +++ b/arch/arm/mach-at91/at91sam9n12.c
> @@ -0,0 +1,275 @@
> +/*
> + * SoC specific setup code for the AT91SAM9N12
> + *
> + * Copyright (C) 2012 Atmel Corporation.
> + *
> + * Licensed under GPLv2 or later.
> + */
> +
> +#include <linux/module.h>
> +#include <linux/dma-mapping.h>
> +
> +#include <asm/irq.h>
> +#include <asm/mach/arch.h>
> +#include <asm/mach/map.h>
> +#include <mach/at91sam9n12.h>
> +#include <mach/at91_pmc.h>
> +#include <mach/cpu.h>
> +#include <mach/board.h>
> +
> +#include "soc.h"
> +#include "generic.h"
> +#include "clock.h"
> +#include "sam9_smc.h"
> +
> +/* --------------------------------------------------------------------
> + * Clocks
> + * -------------------------------------------------------------------- */
> +
> +/*
> + * The peripheral clocks.
> + */
> +static struct clk pioAB_clk = {
> + .name = "pioAB_clk",
> + .pmc_mask = 1 << AT91SAM9N12_ID_PIOAB,
> + .type = CLK_TYPE_PERIPHERAL,
> +};
> +static struct clk pioCD_clk = {
> + .name = "pioCD_clk",
> + .pmc_mask = 1 << AT91SAM9N12_ID_PIOCD,
> + .type = CLK_TYPE_PERIPHERAL,
> +};
> +static struct clk usart0_clk = {
> + .name = "usart0_clk",
> + .pmc_mask = 1 << AT91SAM9N12_ID_USART0,
> + .type = CLK_TYPE_PERIPHERAL,
> +};
> +static struct clk usart1_clk = {
> + .name = "usart1_clk",
> + .pmc_mask = 1 << AT91SAM9N12_ID_USART1,
> + .type = CLK_TYPE_PERIPHERAL,
> +};
> +static struct clk usart2_clk = {
> + .name = "usart2_clk",
> + .pmc_mask = 1 << AT91SAM9N12_ID_USART2,
> + .type = CLK_TYPE_PERIPHERAL,
> +};
> +static struct clk usart3_clk = {
> + .name = "usart3_clk",
> + .pmc_mask = 1 << AT91SAM9N12_ID_USART3,
> + .type = CLK_TYPE_PERIPHERAL,
> +};
> +static struct clk twi0_clk = {
> + .name = "twi0_clk",
> + .pmc_mask = 1 << AT91SAM9N12_ID_TWI0,
> + .type = CLK_TYPE_PERIPHERAL,
> +};
> +static struct clk twi1_clk = {
> + .name = "twi1_clk",
> + .pmc_mask = 1 << AT91SAM9N12_ID_TWI1,
> + .type = CLK_TYPE_PERIPHERAL,
> +};
> +static struct clk mmc_clk = {
> + .name = "mci_clk",
> + .pmc_mask = 1 << AT91SAM9N12_ID_MCI,
> + .type = CLK_TYPE_PERIPHERAL,
> +};
> +static struct clk spi0_clk = {
> + .name = "spi0_clk",
> + .pmc_mask = 1 << AT91SAM9N12_ID_SPI0,
> + .type = CLK_TYPE_PERIPHERAL,
> +};
> +static struct clk spi1_clk = {
> + .name = "spi1_clk",
> + .pmc_mask = 1 << AT91SAM9N12_ID_SPI1,
> + .type = CLK_TYPE_PERIPHERAL,
> +};
> +static struct clk uart0_clk = {
> + .name = "uart0_clk",
> + .pmc_mask = 1 << AT91SAM9N12_ID_UART0,
> + .type = CLK_TYPE_PERIPHERAL,
> +};
> +static struct clk uart1_clk = {
> + .name = "uart1_clk",
> + .pmc_mask = 1 << AT91SAM9N12_ID_UART1,
> + .type = CLK_TYPE_PERIPHERAL,
> +};
> +static struct clk tcb_clk = {
> + .name = "tcb_clk",
> + .pmc_mask = 1 << AT91SAM9N12_ID_TCB,
> + .type = CLK_TYPE_PERIPHERAL,
> +};
> +static struct clk pwm_clk = {
> + .name = "pwm_clk",
> + .pmc_mask = 1 << AT91SAM9N12_ID_PWM,
> + .type = CLK_TYPE_PERIPHERAL,
> +};
> +static struct clk adc_clk = {
> + .name = "adc_clk",
> + .pmc_mask = 1 << AT91SAM9N12_ID_ADC,
> + .type = CLK_TYPE_PERIPHERAL,
> +};
> +static struct clk dma_clk = {
> + .name = "dma_clk",
> + .pmc_mask = 1 << AT91SAM9N12_ID_DMA,
> + .type = CLK_TYPE_PERIPHERAL,
> +};
> +static struct clk uhp_clk = {
> + .name = "uhp",
> + .pmc_mask = 1 << AT91SAM9N12_ID_UHP,
> + .type = CLK_TYPE_PERIPHERAL,
> +};
> +static struct clk udp_clk = {
> + .name = "udp_clk",
> + .pmc_mask = 1 << AT91SAM9N12_ID_UDP,
> + .type = CLK_TYPE_PERIPHERAL,
> +};
> +static struct clk lcdc_clk = {
> + .name = "lcdc_clk",
> + .pmc_mask = 1 << AT91SAM9N12_ID_LCDC,
> + .type = CLK_TYPE_PERIPHERAL,
> +};
> +static struct clk ssc_clk = {
> + .name = "ssc_clk",
> + .pmc_mask = 1 << AT91SAM9N12_ID_SSC,
> + .type = CLK_TYPE_PERIPHERAL,
> +};
> +
> +static struct clk *periph_clocks[] __initdata = {
> + &pioAB_clk,
> + &pioCD_clk,
> + &usart0_clk,
> + &usart1_clk,
> + &usart2_clk,
> + &usart3_clk,
> + &twi0_clk,
> + &twi1_clk,
> + &mmc_clk,
> + &spi0_clk,
> + &spi1_clk,
> + &lcdc_clk,
> + &uart0_clk,
> + &uart1_clk,
> + &tcb_clk,
> + &pwm_clk,
> + &adc_clk,
> + &dma_clk,
> + &uhp_clk,
> + &udp_clk,
> + &ssc_clk,
> +};
> +
> +static struct clk_lookup periph_clocks_lookups[] = {
> + /* lookup table for DT entries */
> + CLKDEV_CON_DEV_ID("usart", "fffff200.serial", &mck),
> + CLKDEV_CON_DEV_ID("usart", "f801c000.serial", &usart0_clk),
> + CLKDEV_CON_DEV_ID("usart", "f8020000.serial", &usart1_clk),
> + CLKDEV_CON_DEV_ID("usart", "f8024000.serial", &usart2_clk),
> + CLKDEV_CON_DEV_ID("usart", "f8028000.serial", &usart3_clk),
> + CLKDEV_CON_DEV_ID("t0_clk", "f8008000.timer", &tcb_clk),
> + CLKDEV_CON_DEV_ID("t0_clk", "f800c000.timer", &tcb_clk),
> + CLKDEV_CON_DEV_ID("dma_clk", "ffffec00.dma-controller", &dma_clk),
> + CLKDEV_CON_ID("pioA", &pioAB_clk),
> + CLKDEV_CON_ID("pioB", &pioAB_clk),
> + CLKDEV_CON_ID("pioC", &pioCD_clk),
> + CLKDEV_CON_ID("pioD", &pioCD_clk),
> + /* additional fake clock for macb_hclk */
> + CLKDEV_CON_DEV_ID("hclk", "500000.ohci", &uhp_clk),
> + CLKDEV_CON_DEV_ID("ohci_clk", "500000.ohci", &uhp_clk),
> +};
> +
> +/*
> + * The two programmable clocks.
> + * You must configure pin multiplexing to bring these signals out.
> + */
> +static struct clk pck0 = {
> + .name = "pck0",
> + .pmc_mask = AT91_PMC_PCK0,
> + .type = CLK_TYPE_PROGRAMMABLE,
> + .id = 0,
> +};
> +static struct clk pck1 = {
> + .name = "pck1",
> + .pmc_mask = AT91_PMC_PCK1,
> + .type = CLK_TYPE_PROGRAMMABLE,
> + .id = 1,
> +};
> +
> +static void __init at91sam9n12_register_clocks(void)
> +{
> + int i;
> +
> + for (i = 0; i < ARRAY_SIZE(periph_clocks); i++)
> + clk_register(periph_clocks[i]);
> + clk_register(&pck0);
> + clk_register(&pck1);
> +
> + clkdev_add_table(periph_clocks_lookups,
> + ARRAY_SIZE(periph_clocks_lookups));
> +
> +}
> +
> +/* --------------------------------------------------------------------
> + * AT91SAM9N12 processor initialization
> + * -------------------------------------------------------------------- */
> +
> +static void __init at91sam9n12_map_io(void)
> +{
> + at91_init_sram(0, AT91SAM9N12_SRAM_BASE, AT91SAM9N12_SRAM_SIZE);
> +}
> +
> +void __init at91sam9n12_initialize(void)
> +{
> + at91_extern_irq = (1 << AT91SAM9N12_ID_IRQ0);
> +
> + /* Register GPIO subsystem (using DT) */
> + at91_gpio_init(NULL, 0);
> +}
> +
> +/* --------------------------------------------------------------------
> + * Interrupt initialization
> + * -------------------------------------------------------------------- */
> +/*
> + * The default interrupt priority levels (0 = lowest, 7 = highest).
> + */
> +static unsigned int at91sam9n12_default_irq_priority[NR_AIC_IRQS] __initdata = {
> + 7, /* 00: Advanced Interrupt Controller (FIQ) */
> + 7, /* 01: System Peripherals */
> + 1, /* 02: Parallel IO Controller A and B */
> + 1, /* 03: Parallel IO Controller C and D */
> + 4, /* 04: FUSE Controller */
> + 5, /* 05: USART 0 */
> + 5, /* 06: USART 1 */
> + 5, /* 07: USART 2 */
> + 5, /* 08: USART 3 */
> + 6, /* 09: Two-Wire Interface 0 */
> + 6, /* 10: Two-Wire Interface 1 */
> + 0, /* 11: Reserved */
> + 0, /* 12: Multimedia Card Interface */
> + 5, /* 13: Serial Peripheral Interface 0 */
> + 5, /* 14: Serial Peripheral Interface 1 */
> + 5, /* 15: UART 0 */
> + 5, /* 16: UART 1 */
> + 0, /* 17: Timer Counter 0, 1, 2, 3, 4 and 5 */
> + 0, /* 18: Pulse Width Modulation Controller */
> + 0, /* 19: ADC Controller */
> + 0, /* 20: DMA Controller */
> + 0, /* 21: Reserved */
> + 2, /* 22: USB Host High Speed port */
> + 2, /* 23: USB Device High speed port */
> + 3, /* 24: Reserved */
> + 3, /* 25: LDC Controller or Image Sensor Interface */
> + 0, /* 26: Reserved */
> + 3, /* 27: Reserved */
> + 4, /* 28: Synchronous Serial Controller */
> + 4, /* 29: Reserved */
> + 4, /* 30: TRNG */
> + 0, /* 31: Advanced Interrupt Controller (IRQ0) */
> +};
> +
> +struct at91_init_soc __initdata at91sam9n12_soc = {
> + .map_io = at91sam9n12_map_io,
> + .default_irq_priority = at91sam9n12_default_irq_priority,
> + .register_clocks = at91sam9n12_register_clocks,
> + .init = at91sam9n12_initialize,
> +};
> diff --git a/arch/arm/mach-at91/board-dt.c b/arch/arm/mach-at91/board-dt.c
> index c18d4d3..0a21555 100644
> --- a/arch/arm/mach-at91/board-dt.c
> +++ b/arch/arm/mach-at91/board-dt.c
> @@ -51,6 +51,7 @@ static void __init at91_dt_device_init(void)
> static const char *at91_dt_board_compat[] __initdata = {
> "atmel,at91sam9m10g45ek",
> "atmel,at91sam9x5ek",
> + "atmel,at91sam9n12ek",
This chunck is not needed anymore: we will use the generic name
"atmel,at91sam9"
> "calao,usb-a9g20",
> NULL
> };
> diff --git a/arch/arm/mach-at91/clock.c b/arch/arm/mach-at91/clock.c
> index a0f4d74..46130da 100644
> --- a/arch/arm/mach-at91/clock.c
> +++ b/arch/arm/mach-at91/clock.c
> @@ -57,13 +57,15 @@ void __iomem *at91_pmc_base;
>
> #define cpu_has_800M_plla() ( cpu_is_at91sam9g20() \
> || cpu_is_at91sam9g45() \
> - || cpu_is_at91sam9x5())
> + || cpu_is_at91sam9x5() \
> + || cpu_is_at91sam9n12())
>
> #define cpu_has_300M_plla() (cpu_is_at91sam9g10())
>
> #define cpu_has_pllb() (!(cpu_is_at91sam9rl() \
> || cpu_is_at91sam9g45() \
> - || cpu_is_at91sam9x5()))
> + || cpu_is_at91sam9x5() \
> + || cpu_is_at91sam9n12()))
>
> #define cpu_has_upll() (cpu_is_at91sam9g45() \
> || cpu_is_at91sam9x5())
> @@ -77,12 +79,15 @@ void __iomem *at91_pmc_base;
> || cpu_is_at91sam9x5()))
>
> #define cpu_has_plladiv2() (cpu_is_at91sam9g45() \
> - || cpu_is_at91sam9x5())
> + || cpu_is_at91sam9x5() \
> + || cpu_is_at91sam9n12())
>
> #define cpu_has_mdiv3() (cpu_is_at91sam9g45() \
> - || cpu_is_at91sam9x5())
> + || cpu_is_at91sam9x5() \
> + || cpu_is_at91sam9n12())
>
> -#define cpu_has_alt_prescaler() (cpu_is_at91sam9x5())
> +#define cpu_has_alt_prescaler() (cpu_is_at91sam9x5() \
> + || cpu_is_at91sam9n12())
>
> static LIST_HEAD(clocks);
> static DEFINE_SPINLOCK(clk_lock);
> diff --git a/arch/arm/mach-at91/setup.c b/arch/arm/mach-at91/setup.c
> index 97cc04d..34c9c27 100644
> --- a/arch/arm/mach-at91/setup.c
> +++ b/arch/arm/mach-at91/setup.c
> @@ -142,6 +142,11 @@ static void __init soc_detect(u32 dbgu_base)
> at91_soc_initdata.type = AT91_SOC_SAM9X5;
> at91_boot_soc = at91sam9x5_soc;
> break;
> +
> + case ARCH_ID_AT91SAM9N12:
> + at91_soc_initdata.type = AT91_SOC_SAM9N12;
> + at91_boot_soc = at91sam9n12_soc;
> + break;
> }
>
> /* at91sam9g10 */
> @@ -209,6 +214,7 @@ static const char *soc_name[] = {
> [AT91_SOC_SAM9G45] = "at91sam9g45",
> [AT91_SOC_SAM9RL] = "at91sam9rl",
> [AT91_SOC_SAM9X5] = "at91sam9x5",
> + [AT91_SOC_SAM9N12] = "at91sam9n12",
> [AT91_SOC_NONE] = "Unknown"
> };
>
Except those little modifications, the 9n12 port seems neat. Thanks for
doing it.
Best regards,
--
Nicolas Ferre
^ permalink raw reply [flat|nested] 14+ messages in thread
* [PATCH 1/4] AT91: Add DT description files for AT91SAM9N12-EK
2012-04-12 7:26 ` Ludovic Desroches
@ 2012-04-16 1:56 ` Xu, Hong
0 siblings, 0 replies; 14+ messages in thread
From: Xu, Hong @ 2012-04-16 1:56 UTC (permalink / raw)
To: linux-arm-kernel
Hi Ludo,
> -----Original Message-----
> From: Ludovic Desroches [mailto:ludovic.desroches at atmel.com]
> Sent: Thursday, April 12, 2012 3:27 PM
> To: Xu, Hong
> Cc: Ferre, Nicolas; plagnioj at jcrosoft.com;
> linux-arm-kernel at lists.infradead.org; Desroches, Ludovic
> Subject: Re: [PATCH 1/4] AT91: Add DT description files for AT91SAM9N12-EK
>
> Hi,
>
> Le 04/12/2012 08:26 AM, Hong Xu a ?crit :
> > Added AT91SAM9N12 SoC DT file, as well as the board definition file
> > for AT91SAM9N12-EK
> >
> > Signed-off-by: Hong Xu<hong.xu@atmel.com>
> > ---
> > arch/arm/boot/dts/at91sam9n12.dtsi | 223
> +++++++++++++++++++++++++++++++++++
> > arch/arm/boot/dts/at91sam9n12ek.dts | 111 +++++++++++++++++
> > 2 files changed, 334 insertions(+), 0 deletions(-)
> > create mode 100644 arch/arm/boot/dts/at91sam9n12.dtsi
> > create mode 100644 arch/arm/boot/dts/at91sam9n12ek.dts
> >
[...]
> > +
> > + memory at 20000000 {
> > + reg =<0x20000000 0x10000000>;
> > + };
>
> Please remove unit address part. Explanations here:
> http://lists-archives.com/linux-kernel/27617260-arm-at91-dt-remove-unit-ad
> dress-part-for-memory-nodes.html
>
OK.
> [...]
>
> > diff --git a/arch/arm/boot/dts/at91sam9n12ek.dts
> b/arch/arm/boot/dts/at91sam9n12ek.dts
> > new file mode 100644
> > index 0000000..56b012f
> > --- /dev/null
> > +++ b/arch/arm/boot/dts/at91sam9n12ek.dts
> > @@ -0,0 +1,111 @@
[...]
> > +
> > + memory at 20000000 {
> > + reg =<0x20000000 0x10000000>;
> > + };
>
> ditto
OK
Thanks
BR,
Eric
>
> [...]
>
> Regards
>
> Ludovic
^ permalink raw reply [flat|nested] 14+ messages in thread
* [PATCH 1/4] AT91: Add DT description files for AT91SAM9N12-EK
2012-04-13 16:20 ` Nicolas Ferre
@ 2012-04-16 2:28 ` Xu, Hong
0 siblings, 0 replies; 14+ messages in thread
From: Xu, Hong @ 2012-04-16 2:28 UTC (permalink / raw)
To: linux-arm-kernel
Hi Nicolas,
> -----Original Message-----
> From: Nicolas Ferre [mailto:nicolas.ferre at atmel.com]
> Sent: Saturday, April 14, 2012 12:21 AM
> To: Xu, Hong
> Cc: plagnioj at jcrosoft.com; linux-arm-kernel at lists.infradead.org
> Subject: Re: [PATCH 1/4] AT91: Add DT description files for AT91SAM9N12-EK
>
> Hi Xu Hong,
>
> Some comments below...
>
> (you may also include devicetree-discuss at lists.ozlabs.org as well)
>
> On 04/12/2012 08:26 AM, Hong Xu :
> > Added AT91SAM9N12 SoC DT file, as well as the board definition file
> > for AT91SAM9N12-EK
> >
> > Signed-off-by: Hong Xu <hong.xu@atmel.com>
> > ---
> > arch/arm/boot/dts/at91sam9n12.dtsi | 223
> +++++++++++++++++++++++++++++++++++
> > arch/arm/boot/dts/at91sam9n12ek.dts | 111 +++++++++++++++++
> > 2 files changed, 334 insertions(+), 0 deletions(-)
> > create mode 100644 arch/arm/boot/dts/at91sam9n12.dtsi
> > create mode 100644 arch/arm/boot/dts/at91sam9n12ek.dts
> >
[...]
> > +
> > + shdwc at fffffe10 {
> > + compatible = "atmel,at91sam9n12-shdwc";
>
> I think that shdwc is compatible with "atmel,at91sam9x5-shdwc", is not it?
>
>
> > + reg = <0xfffffe10 0x10>;
> > + };
> > +
> > + tcb0: timer at f8008000 {
> > + compatible = "atmel,at91sam9n12-tcb";
>
> Here also, I suspect a compatibility with: "atmel,at91sam9x5-tcb"
>
Exactly. Although a generic name sounds nicer. :-)
> > + reg = <0xf8008000 0x100>;
> > + interrupts = <17 4>;
> > + };
> > +
> > + tcb1: timer at f800c000 {
> > + compatible = "atmel,at91sam9n12-tcb";
>
> Ditto.
>
Ditto.
> > + reg = <0xf800c000 0x100>;
> > + interrupts = <17 4>;
> > + };
> > +
[...]
> > diff --git a/arch/arm/boot/dts/at91sam9n12ek.dts
> b/arch/arm/boot/dts/at91sam9n12ek.dts
> > new file mode 100644
> > index 0000000..56b012f
> > --- /dev/null
> > +++ b/arch/arm/boot/dts/at91sam9n12ek.dts
> > @@ -0,0 +1,111 @@
> > +/*
[...]
> > + ahb {
> > + apb {
> > + dbgu: serial at fffff200 {
> > + status = "okay";
> > + };
> > +
> > + tcb0: timer at f8008000 {
> > + status = "okay";
>
> No need for this node, tcb0 is already enabled.
>
> > + };
> > +
> > + tcb1: timer at f800c000 {
> > + status = "okay";
>
> Ditto.
>
OK, both tcb(s) are enabled in SoC DT file.
> > + };
> > + };
> > +
> > + nand0: nand at 40000000 {
> > + nand-bus-width = <8>;
> > + nand-ecc-mode = "hw";
>
> No, HW PMECC code is not included in mainline yet. You should submit
> 9n12 with sw ECC for the moment. We will change this argument afterwards.
>
>
My typo. :)
> > + /*
> > + nand-on-flash-bbt;
> > + */
>
> You can keep this one, or remove it completely.
>
> > + atmel,pmecc-cap = <2>;
> > + atmel,sector-size = <512>;
>
> Later for those PMECC related bindings. You can submit them with the
> PMECC series BTW.
>
OK.
Thanks
BR,
Eric
> > + status = "okay";
> > +
> > + boot at 0 {
> > + label = "bootstrap/uboot/kernel";
> > + reg = <0x0 0x400000>;
> > + };
[...]
^ permalink raw reply [flat|nested] 14+ messages in thread
* [PATCH 2/4] AT91: Add machine header file for AT91SAM9N12 SoC
2012-04-13 16:17 ` Nicolas Ferre
@ 2012-04-16 2:30 ` Xu, Hong
0 siblings, 0 replies; 14+ messages in thread
From: Xu, Hong @ 2012-04-16 2:30 UTC (permalink / raw)
To: linux-arm-kernel
> -----Original Message-----
> From: Nicolas Ferre [mailto:nicolas.ferre at atmel.com]
> Sent: Saturday, April 14, 2012 12:18 AM
> To: Xu, Hong
> Cc: plagnioj at jcrosoft.com; linux-arm-kernel at lists.infradead.org
> Subject: Re: [PATCH 2/4] AT91: Add machine header file for AT91SAM9N12 SoC
>
> On 04/12/2012 08:26 AM, Hong Xu :
> > Signed-off-by: Hong Xu <hong.xu@atmel.com>
> > ---
> > arch/arm/mach-at91/include/mach/at91sam9n12.h | 68
> ++++++++++++++++++++
> > .../mach-at91/include/mach/at91sam9n12_matrix.h | 53
> +++++++++++++++
> > arch/arm/mach-at91/include/mach/cpu.h | 10 +++
> > arch/arm/mach-at91/include/mach/hardware.h | 2 +
> > arch/arm/mach-at91/soc.h | 5 ++
> > 5 files changed, 138 insertions(+), 0 deletions(-)
> > create mode 100644 arch/arm/mach-at91/include/mach/at91sam9n12.h
> > create mode 100644 arch/arm/mach-at91/include/mach/at91sam9n12_matrix.h
> >
> > diff --git a/arch/arm/mach-at91/include/mach/at91sam9n12.h
> b/arch/arm/mach-at91/include/mach/at91sam9n12.h
> > new file mode 100644
> > index 0000000..ff14bbf
> > --- /dev/null
> > +++ b/arch/arm/mach-at91/include/mach/at91sam9n12.h
> > @@ -0,0 +1,68 @@
[...]
> > +/*
> > + * Base addresses for early serial code (uncompress.h)
> > + */
> > +#define AT91_DBGU AT91_BASE_DBGU0
> > +#define AT91_USART0 AT91SAM9N12_BASE_USART0
> > +#define AT91_USART1 AT91SAM9N12_BASE_USART1
> > +#define AT91_USART2 AT91SAM9N12_BASE_USART2
>
> You can remove those defines (about uncompress.h) : they will go away soon.
>
OK.
BR,
Eric
> > +
> > +/*
> > + * Internal Memory.
> > + */
> > +#define AT91SAM9N12_SRAM_BASE 0x00300000 /* Internal SRAM base address
> */
> > +#define AT91SAM9N12_SRAM_SIZE SZ_32K /* Internal SRAM size (32Kb)
> */
> > +
> > +#define AT91SAM9N12_ROM_BASE 0x00100000 /* Internal ROM base address
> */
> > +#define AT91SAM9N12_ROM_SIZE SZ_128K /* Internal ROM size (128Kb)
> */
> > +
> > +#endif
> > diff --git a/arch/arm/mach-at91/include/mach/at91sam9n12_matrix.h
> b/arch/arm/mach-at91/include/mach/at91sam9n12_matrix.h
> > new file mode 100644
> > index 0000000..40060cd
> > --- /dev/null
> > +++ b/arch/arm/mach-at91/include/mach/at91sam9n12_matrix.h
> > @@ -0,0 +1,53 @@
> > +/*
> > + * Matrix-centric header file for the AT91SAM9N12
> > + *
> > + * Copyright (C) 2012 Atmel Corporation.
> > + *
> > + * Only EBI related registers.
> > + * Write Protect register definitions may be useful.
> > + *
> > + * Licensed under GPLv2 or later.
> > + */
> > +
> > +#ifndef _AT91SAM9N12_MATRIX_H_
> > +#define _AT91SAM9N12_MATRIX_H_
> > +
> > +#define AT91_MATRIX_EBICSA (AT91_MATRIX + 0x118) /* EBI Chip Select
> Assignment Register */
> > +#define AT91_MATRIX_EBI_CS1A (1 << 1) /* Chip Select 1
> Assignment */
> > +#define AT91_MATRIX_EBI_CS1A_SMC (0 << 1)
> > +#define AT91_MATRIX_EBI_CS1A_SDRAMC (1 << 1)
> > +#define AT91_MATRIX_EBI_CS3A (1 << 3) /* Chip Select 3
> Assignment */
> > +#define AT91_MATRIX_EBI_CS3A_SMC (0 << 3)
> > +#define AT91_MATRIX_EBI_CS3A_SMC_NANDFLASH (1 << 3)
> > +#define AT91_MATRIX_EBI_DBPUC (1 << 8) /* Data Bus Pull-up
> Configuration */
> > +#define AT91_MATRIX_EBI_DBPU_ON (0 << 8)
> > +#define AT91_MATRIX_EBI_DBPU_OFF (1 << 8)
> > +#define AT91_MATRIX_EBI_VDDIOMSEL (1 << 16) /* Memory voltage
> selection */
> > +#define AT91_MATRIX_EBI_VDDIOMSEL_1_8V (0 << 16)
> > +#define AT91_MATRIX_EBI_VDDIOMSEL_3_3V (1 << 16)
> > +#define AT91_MATRIX_EBI_EBI_IOSR (1 << 17) /* EBI I/O slew rate
> selection */
> > +#define AT91_MATRIX_EBI_EBI_IOSR_REDUCED (0 << 17)
> > +#define AT91_MATRIX_EBI_EBI_IOSR_NORMAL (1 << 17)
> > +#define AT91_MATRIX_EBI_DDR_IOSR (1 << 18) /* DDR2 dedicated
> port I/O slew rate selection */
> > +#define AT91_MATRIX_EBI_DDR_IOSR_REDUCED (0 << 18)
> > +#define AT91_MATRIX_EBI_DDR_IOSR_NORMAL (1 << 18)
> > +#define AT91_MATRIX_NFD0_SELECT (1 << 24) /* NAND Flash Data
> Bus Selection */
> > +#define AT91_MATRIX_NFD0_ON_D0 (0 << 24)
> > +#define AT91_MATRIX_NFD0_ON_D16 (1 << 24)
> > +#define AT91_MATRIX_DDR_MP_EN (1 << 25) /* DDR Multi-port
> Enable */
> > +#define AT91_MATRIX_MP_OFF (0 << 25)
> > +#define AT91_MATRIX_MP_ON (1 << 25)
> > +
> > +#define AT91_MATRIX_WPMR (AT91_MATRIX + 0x1E4) /* Write Protect Mode
> Register */
> > +#define AT91_MATRIX_WPMR_WPEN (1 << 0) /* Write Protect
> ENable */
> > +#define AT91_MATRIX_WPMR_WP_WPDIS (0 << 0)
> > +#define AT91_MATRIX_WPMR_WP_WPEN (1 << 0)
> > +#define AT91_MATRIX_WPMR_WPKEY (0xFFFFFF << 8) /* Write
> Protect KEY */
> > +
> > +#define AT91_MATRIX_WPSR (AT91_MATRIX + 0x1E8) /* Write Protect Status
> Register */
> > +#define AT91_MATRIX_WPSR_WPVS (1 << 0) /* Write Protect
> Violation Status */
> > +#define AT91_MATRIX_WPSR_NO_WPV (0 << 0)
> > +#define AT91_MATRIX_WPSR_WPV (1 << 0)
> > +#define AT91_MATRIX_WPSR_WPVSRC (0xFFFF << 8) /* Write
> Protect Violation Source */
> > +
> > +#endif
> > diff --git a/arch/arm/mach-at91/include/mach/cpu.h
> b/arch/arm/mach-at91/include/mach/cpu.h
> > index 0118c33..c7c64e9 100644
> > --- a/arch/arm/mach-at91/include/mach/cpu.h
> > +++ b/arch/arm/mach-at91/include/mach/cpu.h
> > @@ -25,6 +25,7 @@
> > #define ARCH_ID_AT91SAM9G45MRL 0x819b05a2 /* aka 9G45-ES2 & non ES
> lots */
> > #define ARCH_ID_AT91SAM9G45ES 0x819b05a1 /* 9G45-ES (Engineering
> Sample) */
> > #define ARCH_ID_AT91SAM9X5 0x819a05a0
> > +#define ARCH_ID_AT91SAM9N12 0x819a07a0
> >
> > #define ARCH_ID_AT91SAM9XE128 0x329973a0
> > #define ARCH_ID_AT91SAM9XE256 0x329a93a0
> > @@ -70,6 +71,9 @@ enum at91_soc_type {
> > /* SAM9X5 */
> > AT91_SOC_SAM9X5,
> >
> > + /* SAM9N12 */
> > + AT91_SOC_SAM9N12,
> > +
> > /* Unknown type */
> > AT91_SOC_NONE
> > };
> > @@ -184,6 +188,12 @@ static inline int at91_soc_is_detected(void)
> > #define cpu_is_at91sam9x25() (0)
> > #endif
> >
> > +#ifdef CONFIG_ARCH_AT91SAM9N12
> > +#define cpu_is_at91sam9n12() (at91_soc_initdata.type ==
> AT91_SOC_SAM9N12)
> > +#else
> > +#define cpu_is_at91sam9n12() (0)
> > +#endif
> > +
> > /*
> > * Since this is ARM, we will never run on any AVR32 CPU. But these
> > * definitions may reduce clutter in common drivers.
> > diff --git a/arch/arm/mach-at91/include/mach/hardware.h
> b/arch/arm/mach-at91/include/mach/hardware.h
> > index e9e29a6..39a5654 100644
> > --- a/arch/arm/mach-at91/include/mach/hardware.h
> > +++ b/arch/arm/mach-at91/include/mach/hardware.h
> > @@ -36,6 +36,8 @@
> > #include <mach/at91sam9g45.h>
> > #elif defined(CONFIG_ARCH_AT91SAM9X5)
> > #include <mach/at91sam9x5.h>
> > +#elif defined(CONFIG_ARCH_AT91SAM9N12)
> > +#include <mach/at91sam9n12.h>
> > #elif defined(CONFIG_ARCH_AT91X40)
> > #include <mach/at91x40.h>
> > #else
> > diff --git a/arch/arm/mach-at91/soc.h b/arch/arm/mach-at91/soc.h
> > index 5db4aa4..0e3fcb8 100644
> > --- a/arch/arm/mach-at91/soc.h
> > +++ b/arch/arm/mach-at91/soc.h
> > @@ -20,6 +20,7 @@ extern struct at91_init_soc at91sam9263_soc;
> > extern struct at91_init_soc at91sam9g45_soc;
> > extern struct at91_init_soc at91sam9rl_soc;
> > extern struct at91_init_soc at91sam9x5_soc;
> > +extern struct at91_init_soc at91sam9n12_soc;
> >
> > static inline int at91_soc_is_enabled(void)
> > {
> > @@ -53,3 +54,7 @@ static inline int at91_soc_is_enabled(void)
> > #if !defined(CONFIG_ARCH_AT91SAM9X5)
> > #define at91sam9x5_soc at91_boot_soc
> > #endif
> > +
> > +#if !defined(CONFIG_ARCH_AT91SAM9N12)
> > +#define at91sam9n12_soc at91_boot_soc
> > +#endif
>
>
> --
> Nicolas Ferre
^ permalink raw reply [flat|nested] 14+ messages in thread
* [PATCH 3/4] AT91: Add machine files for AT91SAM9N12 SoC
2012-04-13 16:27 ` Nicolas Ferre
@ 2012-04-16 2:35 ` Xu, Hong
0 siblings, 0 replies; 14+ messages in thread
From: Xu, Hong @ 2012-04-16 2:35 UTC (permalink / raw)
To: linux-arm-kernel
> -----Original Message-----
> From: Nicolas Ferre [mailto:nicolas.ferre at atmel.com]
> Sent: Saturday, April 14, 2012 12:27 AM
> To: Xu, Hong
> Cc: plagnioj at jcrosoft.com; linux-arm-kernel at lists.infradead.org
> Subject: Re: [PATCH 3/4] AT91: Add machine files for AT91SAM9N12 SoC
>
> On 04/12/2012 08:26 AM, Hong Xu :
> > Signed-off-by: Hong Xu <hong.xu@atmel.com>
> > ---
> > arch/arm/mach-at91/Kconfig | 9 ++
> > arch/arm/mach-at91/Makefile | 1 +
>
> An entry is missing in:
> arch/arm/mach-at91/Makefile.boot
>
Ok, got it.
> > arch/arm/mach-at91/at91sam9n12.c | 275
> ++++++++++++++++++++++++++++++++++++++
> > arch/arm/mach-at91/board-dt.c | 1 +
> > arch/arm/mach-at91/clock.c | 15 ++-
> > arch/arm/mach-at91/setup.c | 6 +
> > 6 files changed, 302 insertions(+), 5 deletions(-)
> > create mode 100644 arch/arm/mach-at91/at91sam9n12.c
> >
[...]
> > diff --git a/arch/arm/mach-at91/board-dt.c b/arch/arm/mach-at91/board-dt.c
> > index c18d4d3..0a21555 100644
> > --- a/arch/arm/mach-at91/board-dt.c
> > +++ b/arch/arm/mach-at91/board-dt.c
> > @@ -51,6 +51,7 @@ static void __init at91_dt_device_init(void)
> > static const char *at91_dt_board_compat[] __initdata = {
> > "atmel,at91sam9m10g45ek",
> > "atmel,at91sam9x5ek",
> > + "atmel,at91sam9n12ek",
>
> This chunck is not needed anymore: we will use the generic name
> "atmel,at91sam9"
>
OK, I won't touch it.
BR,
Eric
> > "calao,usb-a9g20",
> > NULL
> > };
> > diff --git a/arch/arm/mach-at91/clock.c b/arch/arm/mach-at91/clock.c
> > index a0f4d74..46130da 100644
> > --- a/arch/arm/mach-at91/clock.c
> > +++ b/arch/arm/mach-at91/clock.c
> > @@ -57,13 +57,15 @@ void __iomem *at91_pmc_base;
> >
> > #define cpu_has_800M_plla() ( cpu_is_at91sam9g20() \
> > || cpu_is_at91sam9g45() \
> > - || cpu_is_at91sam9x5())
> > + || cpu_is_at91sam9x5() \
> > + || cpu_is_at91sam9n12())
> >
> > #define cpu_has_300M_plla() (cpu_is_at91sam9g10())
> >
> > #define cpu_has_pllb() (!(cpu_is_at91sam9rl() \
> > || cpu_is_at91sam9g45() \
> > - || cpu_is_at91sam9x5()))
> > + || cpu_is_at91sam9x5() \
> > + || cpu_is_at91sam9n12()))
> >
> > #define cpu_has_upll() (cpu_is_at91sam9g45() \
> > || cpu_is_at91sam9x5())
> > @@ -77,12 +79,15 @@ void __iomem *at91_pmc_base;
> > || cpu_is_at91sam9x5()))
> >
> > #define cpu_has_plladiv2() (cpu_is_at91sam9g45() \
> > - || cpu_is_at91sam9x5())
> > + || cpu_is_at91sam9x5() \
> > + || cpu_is_at91sam9n12())
> >
> > #define cpu_has_mdiv3() (cpu_is_at91sam9g45() \
> > - || cpu_is_at91sam9x5())
> > + || cpu_is_at91sam9x5() \
> > + || cpu_is_at91sam9n12())
> >
> > -#define cpu_has_alt_prescaler() (cpu_is_at91sam9x5())
> > +#define cpu_has_alt_prescaler() (cpu_is_at91sam9x5() \
> > + || cpu_is_at91sam9n12())
> >
> > static LIST_HEAD(clocks);
> > static DEFINE_SPINLOCK(clk_lock);
> > diff --git a/arch/arm/mach-at91/setup.c b/arch/arm/mach-at91/setup.c
> > index 97cc04d..34c9c27 100644
> > --- a/arch/arm/mach-at91/setup.c
> > +++ b/arch/arm/mach-at91/setup.c
> > @@ -142,6 +142,11 @@ static void __init soc_detect(u32 dbgu_base)
> > at91_soc_initdata.type = AT91_SOC_SAM9X5;
> > at91_boot_soc = at91sam9x5_soc;
> > break;
> > +
> > + case ARCH_ID_AT91SAM9N12:
> > + at91_soc_initdata.type = AT91_SOC_SAM9N12;
> > + at91_boot_soc = at91sam9n12_soc;
> > + break;
> > }
> >
> > /* at91sam9g10 */
> > @@ -209,6 +214,7 @@ static const char *soc_name[] = {
> > [AT91_SOC_SAM9G45] = "at91sam9g45",
> > [AT91_SOC_SAM9RL] = "at91sam9rl",
> > [AT91_SOC_SAM9X5] = "at91sam9x5",
> > + [AT91_SOC_SAM9N12] = "at91sam9n12",
> > [AT91_SOC_NONE] = "Unknown"
> > };
> >
>
> Except those little modifications, the 9n12 port seems neat. Thanks for
> doing it.
>
> Best regards,
> --
> Nicolas Ferre
^ permalink raw reply [flat|nested] 14+ messages in thread
end of thread, other threads:[~2012-04-16 2:35 UTC | newest]
Thread overview: 14+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2012-04-12 6:26 [PATCH 0/4] Add support for Atmel's AT91SAM9N12-EK (With DT) Hong Xu
2012-04-12 6:26 ` [PATCH 1/4] AT91: Add DT description files for AT91SAM9N12-EK Hong Xu
2012-04-12 7:26 ` Ludovic Desroches
2012-04-16 1:56 ` Xu, Hong
2012-04-13 16:20 ` Nicolas Ferre
2012-04-16 2:28 ` Xu, Hong
2012-04-12 6:26 ` [PATCH 2/4] AT91: Add machine header file for AT91SAM9N12 SoC Hong Xu
2012-04-13 16:17 ` Nicolas Ferre
2012-04-16 2:30 ` Xu, Hong
2012-04-12 6:26 ` [PATCH 3/4] AT91: Add machine files " Hong Xu
2012-04-13 16:27 ` Nicolas Ferre
2012-04-16 2:35 ` Xu, Hong
2012-04-12 6:26 ` [PATCH 4/4] Add default kernel configuration file for AT91SAM9N12-EK Hong Xu
2012-04-13 16:23 ` Nicolas Ferre
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.