From mboxrd@z Thu Jan 1 00:00:00 1970 Return-path: Received: from 7of9.schinagl.nl ([88.159.158.68]:41734 "EHLO 7of9.schinagl.nl" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1750871Ab2DOSne (ORCPT ); Sun, 15 Apr 2012 14:43:34 -0400 Message-ID: <4F8B16D3.9010707@schinagl.nl> Date: Sun, 15 Apr 2012 20:43:31 +0200 From: Oliver Schinagl MIME-Version: 1.0 To: Jan Prunk CC: linux-media Subject: Re: ASUS U3100 Mini References: <4F80A06D.8080504@schinagl.nl> <4F83FE2A.5030900@schinagl.nl> In-Reply-To: Content-Type: text/plain; charset=UTF-8; format=flowed Content-Transfer-Encoding: 7bit Sender: linux-media-owner@vger.kernel.org List-ID: That makes a lot of sense. I had the same issue initially with the plus, where I would only receive signals if the antenna was near the window. On 04/15/12 10:26, Jan Prunk wrote: > The trick was with bad reception indoors. > I went testing to the balcony and framedrop dissapeared, > and I get a clear picture. > It seems that the Antenna is too weak in my apartment > to have a clear signal. > > Kind regards, > Jan > > On Sat, Apr 14, 2012 at 4:43 PM, Jan Prunk wrote: >> Hello Oliver, >> >> Thank you for your hint. >> >> I have written up a WIKI page for this device, which hasn't been >> written earlier. >> I am willing to test the device further, if any of the devs can give >> me further hints >> for that. It's still not in a full working mode. I mean video is >> somehow partially visible >> with VLC, but I am no expert in fine-tuning the device. >> >> The wiki page is located at >> http://linuxtv.org/wiki/index.php/ASUS_My_Cinema-U3100_Mini >> >> I will update the information there, if I will receive any further hints. >> >> Kind regards, >> Jan >> >> On Tue, Apr 10, 2012 at 11:32 AM, Oliver Schinagl >> wrote: >>> Unfortunatly I am not familiar with the dib0700 device, so not sure if you >>> need firmware (I assume so, check linuxtv wiki on any dib0700 device. >>> >>> To test the device in its most basic level, I think w_scan is the best bet, >>> as it works without any other extra files. >>> >>> Oliver >>> >>> >>> On 07-04-12 23:32Hello , Jan Prunk wrote: >>>> >>>> Hi Oliver ! >>>> >>>> Thank you for your quick response. >>>> >>>> I assume that mine is a non-plus version. >>>> Do you know how I could proceed tuning the channel list, >>>> which I could then use in the combination with MPlayer ? >>>> >>>> Kind regards, >>>> Jan >>>> >>>> On Sat, Apr 7, 2012 at 10:15 PM, Oliver Schinagl >>>> wrote: >>>>> >>>>> Hi Jan, >>>>> >>>>> That page is probably not supported by linux-media and shows support >>>>> (currently not working afaik) forthe U3100 mini PLUS. yes, minor >>>>> difference >>>>> in name, huge difference inside. The non-plus is a dib0700 based device, >>>>> whereas the Plus is a af9035 based device. The non-plus should work out >>>>> of >>>>> the box on most distro's. >>>>> >>>>> Oliver >>>>> >>>>> >>>>> On 07-04-12 20:21, Jan Prunk wrote: >>>>>> >>>>>> Hi ! >>>>>> >>>>>> I have ASUS U3100 Mini USB Dongle and I would like to watch DVB-T >>>>>> TV streams with it on Debian. The dongle when its plugged in lights with >>>>>> the green light. Performing "(dvb)scan" segfaults. >>>>>> >>>>>> I (partially) followed these guides: >>>>>> >>>>>> http://linuxtv.org/wiki/index.php/Asus_U3100_Mini_plus_DVB-T >>>>>> >>>>>> I am using debian testing and it seems the device gets somehow >>>>>> recognised: >>>>>> >>>>>> [15120.976095] usb 3-1: USB disconnect, device number 2 >>>>>> [15124.716041] usb 1-3: new high-speed USB device number 5 using >>>>>> ehci_hcd >>>>>> [15124.848958] usb 1-3: New USB device found, idVendor=0b05, >>>>>> idProduct=173f >>>>>> [15124.848964] usb 1-3: New USB device strings: Mfr=1, Product=2, >>>>>> SerialNumber=3 >>>>>> [15124.848970] usb 1-3: Product: ASUS DVBT Tuner >>>>>> [15124.848974] usb 1-3: Manufacturer: ASUSTeK >>>>>> [15124.848977] usb 1-3: SerialNumber: 8500500875 >>>>>> [15125.344564] IR NEC protocol handler initialized >>>>>> [15125.370992] IR RC5(x) protocol handler initialized >>>>>> [15125.409376] dib0700: loaded with support for 21 different >>>>>> device-types >>>>>> [15125.409588] dvb-usb: found a 'ASUS My Cinema U3100 Mini DVBT Tuner' >>>>>> in cold state, will try to load a firmware >>>>>> [15125.412893] IR RC6 protocol handler initialized >>>>>> [15125.440888] IR JVC protocol handler initialized >>>>>> [15125.463698] dvb-usb: downloading firmware from file >>>>>> 'dvb-usb-dib0700-1.20.fw' >>>>>> [15125.465236] IR Sony protocol handler initialized >>>>>> [15125.468745] IR MCE Keyboard/mouse protocol handler initialized >>>>>> [15125.473597] lirc_dev: IR Remote Control driver registered, major 249 >>>>>> [15125.474883] IR LIRC bridge handler initialized >>>>>> [15125.671203] dib0700: firmware started successfully. >>>>>> [15126.172240] dvb-usb: found a 'ASUS My Cinema U3100 Mini DVBT Tuner' >>>>>> in warm state. >>>>>> [15126.172346] dvb-usb: will pass the complete MPEG2 transport stream >>>>>> to the software demuxer. >>>>>> [15126.172902] DVB: registering new adapter (ASUS My Cinema U3100 Mini >>>>>> DVBT Tuner) >>>>>> [15126.390206] DVB: registering adapter 0 frontend 0 (DiBcom 7000PC)... >>>>>> [15126.607078] DiB0070: successfully identified >>>>>> [15126.708031] Registered IR keymap rc-dib0700-rc5 >>>>>> [15126.708271] input: IR-receiver inside an USB DVB receiver as >>>>>> /devices/pci0000:00/0000:00:1d.7/usb1/1-3/rc/rc0/input12 >>>>>> [15126.709054] rc0: IR-receiver inside an USB DVB receiver as >>>>>> /devices/pci0000:00/0000:00:1d.7/usb1/1-3/rc/rc0 >>>>>> [15126.710265] dvb-usb: schedule remote query interval to 50 msecs. >>>>>> [15126.710273] dvb-usb: ASUS My Cinema U3100 Mini DVBT Tuner >>>>>> successfully initialized and connected. >>>>>> [15126.710492] usbcore: registered new interface driver dvb_usb_dib0700 >>>>>> [15557.359129] scan[3798]: segfault at 3 ip b7620aa6 sp bfc268ac error >>>>>> 4 in libc-2.13.so[b75e2000+156000] >>>>>> [15650.161033] scan[3836]: segfault at 3 ip b766faa6 sp bf9974dc error >>>>>> 4 in libc-2.13.so[b7631000+156000] >>>>>> >>>>>> After this I used the guide at: >>>>>> http://www.linuxtv.org/wiki/index.php/Testing_your_DVB_device >>>>>> >>>>>> Which resulted into: >>>>>> yang@vaio:~$ scan /usr/share/dvb/dvb-t/si-Ljubljana> >>>>>> ~/.tzap/channels.conf >>>>>> scanning /usr/share/dvb/dvb-t/si-Ljubljana >>>>>> using '/dev/dvb/adapter0/frontend0' and '/dev/dvb/adapter0/demux0' >>>>>> initial transponder 602000000 0 2 9 3 1 3 0 >>>>>> initial transponder 514000000 0 2 9 3 1 2 0 >>>>>>>>> >>>>>>>>> tune to: >>>>>>>>> >>>>>>>>> 602000000:INVERSION_AUTO:BANDWIDTH_8_MHZ:FEC_2_3:FEC_AUTO:QAM_64:TRANSMISSION_MODE_8K:GUARD_INTERVAL_1_4:HIERARCHY_NONE >>>>>> >>>>>> WARNING:>>> tuning failed!!! >>>>>>>>> >>>>>>>>> tune to: >>>>>>>>> >>>>>>>>> 602000000:INVERSION_AUTO:BANDWIDTH_8_MHZ:FEC_2_3:FEC_AUTO:QAM_64:TRANSMISSION_MODE_8K:GUARD_INTERVAL_1_4:HIERARCHY_NONE >>>>>>>>> (tuning failed) >>>>>> >>>>>> WARNING:>>> tuning failed!!! >>>>>>>>> >>>>>>>>> tune to: >>>>>>>>> >>>>>>>>> 514000000:INVERSION_AUTO:BANDWIDTH_8_MHZ:FEC_2_3:FEC_AUTO:QAM_64:TRANSMISSION_MODE_8K:GUARD_INTERVAL_1_8:HIERARCHY_NONE >>>>>> >>>>>> WARNING:>>> tuning failed!!! >>>>>>>>> >>>>>>>>> tune to: >>>>>>>>> >>>>>>>>> 514000000:INVERSION_AUTO:BANDWIDTH_8_MHZ:FEC_2_3:FEC_AUTO:QAM_64:TRANSMISSION_MODE_8K:GUARD_INTERVAL_1_8:HIERARCHY_NONE >>>>>>>>> (tuning failed) >>>>>> >>>>>> WARNING:>>> tuning failed!!! >>>>>> ERROR: initial tuning failed >>>>>> dumping lists (0 services) >>>>>> Done. >>>>>> >>>>>> So I seem to be stuck here. >>>>>> >>>>>> I please for some guidance here, thank you ! >>>>>> >>>>>> Kind regards, >>>>>> Jan Prunk >>>>> >>>>> >>>> >>>> >>> >> >> >> >> -- >> Jan Prunk http://www.prunk.si >> 0x00E80E86 http://pgp.prunk.si >> http://AS50763.peeringdb.com > > >