From mboxrd@z Thu Jan 1 00:00:00 1970 From: Ulf Hansson Subject: Re: [PATCH] MMC-4.5 Power OFF Notify rework Date: Fri, 20 Apr 2012 14:55:34 +0200 Message-ID: <4F915CC6.2040500@stericsson.com> References: <1334839289-22620-1-git-send-email-girish.shivananjappa@linaro.org> Mime-Version: 1.0 Content-Type: text/plain; charset="ISO-8859-1"; format=flowed Content-Transfer-Encoding: 7bit Return-path: Received: from eu1sys200aog119.obsmtp.com ([207.126.144.147]:42436 "EHLO eu1sys200aog119.obsmtp.com" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1751016Ab2DTMzq (ORCPT ); Fri, 20 Apr 2012 08:55:46 -0400 In-Reply-To: Sender: linux-mmc-owner@vger.kernel.org List-Id: linux-mmc@vger.kernel.org To: Girish K S Cc: "linux-mmc@vger.kernel.org" , "patches@linaro.org" , "saugata.das@linaro.org" On 04/20/2012 01:33 PM, Girish K S wrote: > On 19 April 2012 18:11, Girish K S wrote: >> This is a rework of the existing POWER OFF NOTIFY patch. The current problem >> with the patch comes from the ambiguity on the usage of POWER OFF NOTIFY >> together with SLEEP and misunderstanding on the usage of MMC_POWER_OFF >> power_mode from mmc_set_ios in different host controller drivers. >> >> This new patch works around this problem by adding a new host CAP, >> MMC_CAP2_POWER_OFF_VCCQ_DURING_SUSPEND, which when set sends a >> POWER OFF NOTIFY from mmc_suspend instead of SLEEP. It is expected that host >> controller drivers will set this CAP, if they switch off both Vcc and Vccq >> from MMC_POWER_OFF condition within mmc_set_ios. However, note that there >> is no harm in sending MMC_POWER_NOTIFY even if Vccq is not switched off. >> >> This patch also sends POWER OFF NOTIFY from power management routines (e.g. >> mmc_power_save_host, mmc_pm_notify/PM_SUSPEND_PREPARE, mmc_stop_host), which >> does reinitialization of the eMMC on the return path of the power management >> routines (e.g. mmc_power_restore_host, mmc_pm_notify/PM_POST_RESTORE, >> mmc_start_host). >> >> This patch sets POWER_OFF_NOTIFICATION to POWER_OFF_SHORT if it is sent from >> the suspend sequence. If it is sent from shutdown sequence then it is set to >> POWER_OFF_LONG. >> >> Previuos implementation of PowerOff Notify as a core function is replaced as >> a device's bus operation. >> >> Signed-off-by: Saugata Das >> Signed-off-by: Girish K S >> --- >> drivers/mmc/core/core.c | 83 ++++++++++----------------------------------- >> drivers/mmc/core/core.h | 1 + >> drivers/mmc/core/mmc.c | 75 +++++++++++++++++++++++++++++++++++------- >> include/linux/mmc/host.h | 1 + >> 4 files changed, 84 insertions(+), 76 deletions(-) >> >> diff --git a/drivers/mmc/core/core.c b/drivers/mmc/core/core.c >> index e541efb..4b8b2c1 100644 >> --- a/drivers/mmc/core/core.c >> +++ b/drivers/mmc/core/core.c >> @@ -1100,48 +1100,6 @@ void mmc_set_driver_type(struct mmc_host *host, unsigned int drv_type) >> mmc_host_clk_release(host); >> } >> >> -static void mmc_poweroff_notify(struct mmc_host *host) >> -{ >> - struct mmc_card *card; >> - unsigned int timeout; >> - unsigned int notify_type = EXT_CSD_NO_POWER_NOTIFICATION; >> - int err = 0; >> - >> - card = host->card; >> - mmc_claim_host(host); >> - >> - /* >> - * Send power notify command only if card >> - * is mmc and notify state is powered ON >> - */ >> - if (card&& mmc_card_mmc(card)&& >> - (card->poweroff_notify_state == MMC_POWERED_ON)) { >> - >> - if (host->power_notify_type == MMC_HOST_PW_NOTIFY_SHORT) { >> - notify_type = EXT_CSD_POWER_OFF_SHORT; >> - timeout = card->ext_csd.generic_cmd6_time; >> - card->poweroff_notify_state = MMC_POWEROFF_SHORT; >> - } else { >> - notify_type = EXT_CSD_POWER_OFF_LONG; >> - timeout = card->ext_csd.power_off_longtime; >> - card->poweroff_notify_state = MMC_POWEROFF_LONG; >> - } >> - >> - err = mmc_switch(card, EXT_CSD_CMD_SET_NORMAL, >> - EXT_CSD_POWER_OFF_NOTIFICATION, >> - notify_type, timeout); >> - >> - if (err&& err != -EBADMSG) >> - pr_err("Device failed to respond within %d poweroff " >> - "time. Forcefully powering down the device\n", >> - timeout); >> - >> - /* Set the card state to no notification after the poweroff */ >> - card->poweroff_notify_state = MMC_NO_POWER_NOTIFICATION; >> - } >> - mmc_release_host(host); >> -} >> - >> /* >> * Apply power to the MMC stack. This is a two-stage process. >> * First, we enable power to the card without the clock running. >> @@ -1198,30 +1156,12 @@ static void mmc_power_up(struct mmc_host *host) >> >> void mmc_power_off(struct mmc_host *host) >> { >> - int err = 0; >> mmc_host_clk_hold(host); >> >> host->ios.clock = 0; >> host->ios.vdd = 0; >> >> /* >> - * For eMMC 4.5 device send AWAKE command before >> - * POWER_OFF_NOTIFY command, because in sleep state >> - * eMMC 4.5 devices respond to only RESET and AWAKE cmd >> - */ >> - if (host->card&& mmc_card_is_sleep(host->card)&& >> - host->bus_ops->resume) { >> - err = host->bus_ops->resume(host); >> - >> - if (!err) >> - mmc_poweroff_notify(host); >> - else >> - pr_warning("%s: error %d during resume " >> - "(continue with poweroff sequence)\n", >> - mmc_hostname(host), err); >> - } >> - >> - /* >> * Reset ocr mask to be the highest possible voltage supported for >> * this mmc host. This value will be used at next power up. >> */ >> @@ -2084,6 +2024,9 @@ void mmc_stop_host(struct mmc_host *host) >> >> mmc_bus_get(host); >> if (host->bus_ops&& !host->bus_dead) { >> + if (host->bus_ops->poweroff_notify) >> + host->bus_ops->poweroff_notify(host); >> + >> /* Calling bus_ops->remove() with a claimed host can deadlock */ >> if (host->bus_ops->remove) >> host->bus_ops->remove(host); >> @@ -2093,6 +2036,7 @@ void mmc_stop_host(struct mmc_host *host) >> mmc_power_off(host); >> mmc_release_host(host); >> mmc_bus_put(host); >> + >> return; >> } >> mmc_bus_put(host); >> @@ -2119,7 +2063,9 @@ int mmc_power_save_host(struct mmc_host *host) >> >> if (host->bus_ops->power_save) >> ret = host->bus_ops->power_save(host); >> - >> + host->power_notify_type = MMC_HOST_PW_NOTIFY_SHORT; >> + if (host->bus_ops->poweroff_notify) >> + host->bus_ops->poweroff_notify(host); >> mmc_bus_put(host); >> >> mmc_power_off(host); >> @@ -2142,7 +2088,7 @@ int mmc_power_restore_host(struct mmc_host *host) >> mmc_bus_put(host); >> return -EINVAL; >> } >> - >> + host->power_notify_type = MMC_HOST_PW_NOTIFY_LONG; >> mmc_power_up(host); >> ret = host->bus_ops->power_restore(host); >> >> @@ -2161,8 +2107,11 @@ int mmc_card_awake(struct mmc_host *host) >> >> mmc_bus_get(host); >> >> - if (host->bus_ops&& !host->bus_dead&& host->bus_ops->awake) >> + if (host->bus_ops&& !host->bus_dead&& host->bus_ops->awake) { >> err = host->bus_ops->awake(host); >> + if (!err) >> + mmc_card_clr_sleep(host->card); >> + } >> >> mmc_bus_put(host); >> >> @@ -2179,8 +2128,11 @@ int mmc_card_sleep(struct mmc_host *host) >> >> mmc_bus_get(host); >> >> - if (host->bus_ops&& !host->bus_dead&& host->bus_ops->sleep) >> + if (host->bus_ops&& !host->bus_dead&& host->bus_ops->sleep) { >> err = host->bus_ops->sleep(host); >> + if (!err) >> + mmc_card_set_sleep(host->card); >> + } >> >> mmc_bus_put(host); >> >> @@ -2394,6 +2346,8 @@ int mmc_pm_notify(struct notifier_block *notify_block, >> >> if (!host->bus_ops || host->bus_ops->suspend) >> break; >> + if (host->bus_ops->poweroff_notify) >> + host->bus_ops->poweroff_notify(host); >> >> /* Calling bus_ops->remove() with a claimed host can deadlock */ >> if (host->bus_ops->remove) >> @@ -2403,6 +2357,7 @@ int mmc_pm_notify(struct notifier_block *notify_block, >> mmc_detach_bus(host); >> mmc_power_off(host); >> mmc_release_host(host); >> + >> host->pm_flags = 0; >> break; >> >> diff --git a/drivers/mmc/core/core.h b/drivers/mmc/core/core.h >> index 3bdafbc..351cbbe 100644 >> --- a/drivers/mmc/core/core.h >> +++ b/drivers/mmc/core/core.h >> @@ -25,6 +25,7 @@ struct mmc_bus_ops { >> int (*power_save)(struct mmc_host *); >> int (*power_restore)(struct mmc_host *); >> int (*alive)(struct mmc_host *); >> + int (*poweroff_notify)(struct mmc_host *); >> }; >> >> void mmc_attach_bus(struct mmc_host *host, const struct mmc_bus_ops *ops); >> diff --git a/drivers/mmc/core/mmc.c b/drivers/mmc/core/mmc.c >> index 54df5ad..62bdee6 100644 >> --- a/drivers/mmc/core/mmc.c >> +++ b/drivers/mmc/core/mmc.c >> @@ -1282,6 +1282,50 @@ err: >> return err; >> } >> >> +static int mmc_poweroff_notify(struct mmc_host *host) >> +{ >> + struct mmc_card *card; >> + unsigned int timeout; >> + unsigned int notify_type = EXT_CSD_NO_POWER_NOTIFICATION; >> + int err = -EINVAL; >> + >> + card = host->card; >> + mmc_claim_host(host); >> + >> + /* >> + * Send power notify command only if card >> + * is mmc and notify state is powered ON >> + */ >> + if (card&& mmc_card_mmc(card)&& >> + (card->poweroff_notify_state == MMC_POWERED_ON)) { >> + >> + if (host->power_notify_type == MMC_HOST_PW_NOTIFY_SHORT) { >> + notify_type = EXT_CSD_POWER_OFF_SHORT; >> + timeout = card->ext_csd.generic_cmd6_time; >> + card->poweroff_notify_state = MMC_POWEROFF_SHORT; >> + } else { >> + notify_type = EXT_CSD_POWER_OFF_LONG; >> + timeout = card->ext_csd.power_off_longtime; >> + card->poweroff_notify_state = MMC_POWEROFF_LONG; >> + } >> + >> + err = mmc_switch(card, EXT_CSD_CMD_SET_NORMAL, >> + EXT_CSD_POWER_OFF_NOTIFICATION, >> + notify_type, timeout); >> + >> + if (err&& err != -EBADMSG) >> + pr_err("%s: Device failed to respond within %d " >> + "poweroff time. Forcefully powering down " >> + "the device\n", mmc_hostname(host), timeout); >> + >> + /* Set the card state to no notification after the poweroff */ >> + card->poweroff_notify_state = MMC_NO_POWER_NOTIFICATION; >> + } >> + mmc_release_host(host); >> + >> + return err; >> +} >> + >> /* >> * Host is being removed. Free up the current card. >> */ >> @@ -1341,15 +1385,20 @@ static int mmc_suspend(struct mmc_host *host) >> BUG_ON(!host); >> BUG_ON(!host->card); >> >> - mmc_claim_host(host); >> - if (mmc_card_can_sleep(host)) { >> - err = mmc_card_sleep(host); >> - if (!err) >> - mmc_card_set_sleep(host->card); >> - } else if (!mmc_host_is_spi(host)) >> - mmc_deselect_cards(host); >> - host->card->state&= ~(MMC_STATE_HIGHSPEED | MMC_STATE_HIGHSPEED_200); >> - mmc_release_host(host); >> + if (host->caps2& MMC_CAP2_POWER_OFF_VCCQ_DURING_SUSPEND) { >> + err = mmc_poweroff_notify(host); >> + } else { >> + mmc_claim_host(host); >> + if (mmc_card_can_sleep(host)) >> + err = mmc_card_sleep(host); >> + else if (!mmc_host_is_spi(host)) >> + mmc_deselect_cards(host); >> + mmc_release_host(host); >> + } >> + >> + if (!err) >> + host->card->state&= >> + ~(MMC_STATE_HIGHSPEED | MMC_STATE_HIGHSPEED_200); >> >> return err; >> } >> @@ -1368,11 +1417,11 @@ static int mmc_resume(struct mmc_host *host) >> BUG_ON(!host->card); >> >> mmc_claim_host(host); >> - if (mmc_card_is_sleep(host->card)) { >> + if (mmc_card_is_sleep(host->card)) >> err = mmc_card_awake(host); >> - mmc_card_clr_sleep(host->card); >> - } else >> + else >> err = mmc_init_card(host, host->ocr, host->card); >> + >> mmc_release_host(host); >> >> return err; >> @@ -1430,6 +1479,7 @@ static const struct mmc_bus_ops mmc_ops = { >> .resume = NULL, >> .power_restore = mmc_power_restore, >> .alive = mmc_alive, >> + .poweroff_notify = NULL, >> }; >> >> static const struct mmc_bus_ops mmc_ops_unsafe = { >> @@ -1441,6 +1491,7 @@ static const struct mmc_bus_ops mmc_ops_unsafe = { >> .resume = mmc_resume, >> .power_restore = mmc_power_restore, >> .alive = mmc_alive, >> + .poweroff_notify = mmc_poweroff_notify, >> }; >> >> static void mmc_attach_bus_ops(struct mmc_host *host) >> diff --git a/include/linux/mmc/host.h b/include/linux/mmc/host.h >> index cbde4b7..cf44a6f 100644 >> --- a/include/linux/mmc/host.h >> +++ b/include/linux/mmc/host.h >> @@ -238,6 +238,7 @@ struct mmc_host { >> #define MMC_CAP2_BROKEN_VOLTAGE (1<< 7) /* Use the broken voltage */ >> #define MMC_CAP2_DETECT_ON_ERR (1<< 8) /* On I/O err check card removal */ >> #define MMC_CAP2_HC_ERASE_SZ (1<< 9) /* High-capacity erase size */ >> +#define MMC_CAP2_POWER_OFF_VCCQ_DURING_SUSPEND (1<< 10) >> >> mmc_pm_flag_t pm_caps; /* supported pm features */ >> unsigned int power_notify_type; > > Hi Ulf, > need your comment on the above. >> -- >> 1.7.1 >> I will definitely look into it beginning of next week. Please be patient. :-) Kind regards Ulf Hansson