From mboxrd@z Thu Jan 1 00:00:00 1970 Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1756189Ab2EKOSc (ORCPT ); Fri, 11 May 2012 10:18:32 -0400 Received: from mail-ob0-f174.google.com ([209.85.214.174]:47020 "EHLO mail-ob0-f174.google.com" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1752489Ab2EKOSa (ORCPT ); Fri, 11 May 2012 10:18:30 -0400 Message-ID: <4FAD1FAD.4020508@gmail.com> Date: Fri, 11 May 2012 07:18:21 -0700 From: "Justin P. Mattock" User-Agent: Mozilla/5.0 (X11; Linux i686; rv:12.0) Gecko/20120430 Thunderbird/12.0.1 MIME-Version: 1.0 To: volokh84@gmail.com CC: mchehab@infradead.org, gregkh@linuxfoundation.org, dhowells@redhat.com, rdunlap@xenotime.net, pete@sensoray.com, pradheep.sh@gmail.com, linux-media@vger.kernel.org, linux-kernel@vger.kernel.org, Volokh Konstantin Subject: Re: [PATCH] staging: media: go7007: Adlink MPG24 board issues References: <1336714980-13460-1-git-send-email-volokh84@gmail.com> In-Reply-To: <1336714980-13460-1-git-send-email-volokh84@gmail.com> Content-Type: text/plain; charset=ISO-8859-1; format=flowed Content-Transfer-Encoding: 7bit Sender: linux-kernel-owner@vger.kernel.org List-ID: X-Mailing-List: linux-kernel@vger.kernel.org some simple stuff I found along the way.. On 05/10/2012 10:43 PM, volokh84@gmail.com wrote: > From: Volokh Konstantin > > This issuses applyed only for Adlink MPG24 board with go7007 this issue applies only for... > & wis2804, all whese changes was tested for continuos > load&restart mode > these changes were tested for continuous > This is minimal changes needed for start up go7007&wis2804 to work correctly > in 3.4 branch > > Changes: > - When go7007 reset device, i2c was not worked (need rewrite GPIO5) working > - As wis2804 has i2c_addr=0x00/*really*/, so Need set I2C_CLIENT_TEN flag for validity > - some main nonzero initialization, rewrites with kzalloc instead kmalloc > - STATUS_SHUTDOWN was placed in incorrect place, so if firmware wasn`t loaded, we > failed v4l2_device_unregister with kernel panic (OOPS) > - some new v4l2 style features as call_all(...s_stream...) for using subdev calls > - wis-tw2804.ko module code was incompatible with 3.4 branch in initialization v4l2_subdev parts. > now i2c_get_clientdata(...) contains v4l2_subdev struct instead non standart wis_tw2804 struct > standard > Adds: > - Additional chipset tw2804 controls with: gain,auto gain,inputs[0,1],color kill,chroma gain,gain balances, > for all 4 channels (from tw2804.pdf) > - Power control for each 4 ADC (tw2804) up when s_stream(...,1), down otherwise > > Signed-off-by: Volokh Konstantin > --- > drivers/staging/media/go7007/README | 18 + > drivers/staging/media/go7007/go7007-driver.c | 27 +- > drivers/staging/media/go7007/go7007-priv.h | 2 +- > drivers/staging/media/go7007/go7007-usb.c | 5 +- > drivers/staging/media/go7007/go7007-v4l2.c | 7 +- > drivers/staging/media/go7007/wis-tw2804.c | 512 ++++++++++++++++++-------- > 6 files changed, 407 insertions(+), 164 deletions(-) > > diff --git a/drivers/staging/media/go7007/README b/drivers/staging/media/go7007/README > index 48f4476..082a681 100644 > --- a/drivers/staging/media/go7007/README > +++ b/drivers/staging/media/go7007/README > @@ -5,6 +5,24 @@ Todo: > and added to the build. > - testing? > - handle churn in v4l layer. > + - Some features for wis-tw2804 subdev control (comb filter,motion detector sensitive& mask,more over...) > + - go7007-v4l2.c need rewrite with new v4l2 style without nonstandart IO controls (set detector& bitrate) > + nonstandard > +05/05/2012 3.4.0-rc+: > +Changes: > + - When go7007 reset device, i2c was not worked (need rewrite GPIO5) > + - As wis2804 has i2c_addr=0x00/*really*/, so Need set I2C_CLIENT_TEN flag for validity need to set.. > + - Some main nonzero initialization, rewrites with kzalloc instead kmalloc > + - STATUS_SHUTDOWN was placed in incorrect place, so if firmware wasn`t loaded, we > + failed v4l2_device_unregister with kernel panic (OOPS) > + - Some new v4l2 style features as call_all(...s_stream...) for using subdev calls > + - wis-tw2804.ko module code was incompatible with 3.4.x branch in initialization v4l2_subdev parts. > + now i2c_get_clientdata(...) contains v4l2_subdev struct instead non standart wis_tw2804 struct > + > +Adds: > + - Additional chipset wis2804 controls with: gain,auto gain,inputs[0,1],color kill,chroma gain,gain balances, > + for all 4 channels (from tw2804.pdf) > + - Power control for each 4 ADC up when s_stream(...,1), down otherwise in wis-tw2804 module > > Please send patchs to Greg Kroah-Hartman and Cc: Ross > Cohen as well. > diff --git a/drivers/staging/media/go7007/go7007-driver.c b/drivers/staging/media/go7007/go7007-driver.c > index ece2dd1..2dff9b5 100644 > --- a/drivers/staging/media/go7007/go7007-driver.c > +++ b/drivers/staging/media/go7007/go7007-driver.c > @@ -173,6 +173,11 @@ static int go7007_init_encoder(struct go7007 *go) > go7007_write_addr(go, 0x3c82, 0x0001); > go7007_write_addr(go, 0x3c80, 0x00fe); > } > + if (go->board_id == GO7007_BOARDID_ADLINK_MPG24) { > + /* set GPIO5 to be an output, currently low */ > + go7007_write_addr(go, 0x3c82, 0x0000); > + go7007_write_addr(go, 0x3c80, 0x00df); > + } > return 0; > } > > @@ -192,17 +197,23 @@ int go7007_reset_encoder(struct go7007 *go) > /* > * Attempt to instantiate an I2C client by ID, probably loading a module. > */ > -static int init_i2c_module(struct i2c_adapter *adapter, const char *type, > - int addr) > +static int init_i2c_module(struct i2c_adapter *adapter, const struct go_i2c *const i2c) > { > struct go7007 *go = i2c_get_adapdata(adapter); > struct v4l2_device *v4l2_dev =&go->v4l2_dev; > + struct i2c_board_info info; > + > + memset(&info, 0, sizeof(info)); > + strlcpy(info.type, i2c->type, sizeof(info.type)); > + info.addr = i2c->addr; > > - if (v4l2_i2c_new_subdev(v4l2_dev, adapter, type, addr, NULL)) > + if (i2c->id == I2C_DRIVERID_WIS_TW2804) > + info.flags |= I2C_CLIENT_TEN; > + if (v4l2_i2c_new_subdev_board(v4l2_dev, adapter,&info, NULL)) > return 0; > > - printk(KERN_INFO "go7007: probing for module i2c:%s failed\n", type); > - return -1; > + printk(KERN_INFO "go7007: probing for module i2c:%s failed\n", i2c->type); > + return -EINVAL; > } > > /* > @@ -238,9 +249,7 @@ int go7007_register_encoder(struct go7007 *go) > } > if (go->i2c_adapter_online) { > for (i = 0; i< go->board_info->num_i2c_devs; ++i) > - init_i2c_module(&go->i2c_adapter, > - go->board_info->i2c_devs[i].type, > - go->board_info->i2c_devs[i].addr); > + init_i2c_module(&go->i2c_adapter,&go->board_info->i2c_devs[i]); > if (go->board_id == GO7007_BOARDID_ADLINK_MPG24) > i2c_clients_command(&go->i2c_adapter, > DECODER_SET_CHANNEL,&go->channel_number); > @@ -571,7 +580,7 @@ struct go7007 *go7007_alloc(struct go7007_board_info *board, struct device *dev) > struct go7007 *go; > int i; > > - go = kmalloc(sizeof(struct go7007), GFP_KERNEL); > + go = kzalloc(sizeof(struct go7007), GFP_KERNEL); > if (go == NULL) > return NULL; > go->dev = dev; > diff --git a/drivers/staging/media/go7007/go7007-priv.h b/drivers/staging/media/go7007/go7007-priv.h > index b58c394..b7b939a 100644 > --- a/drivers/staging/media/go7007/go7007-priv.h > +++ b/drivers/staging/media/go7007/go7007-priv.h > @@ -88,7 +88,7 @@ struct go7007_board_info { > int audio_bclk_div; > int audio_main_div; > int num_i2c_devs; > - struct { > + struct go_i2c { > const char *type; > int id; > int addr; > diff --git a/drivers/staging/media/go7007/go7007-usb.c b/drivers/staging/media/go7007/go7007-usb.c > index 5443e25..9dbf5ec 100644 > --- a/drivers/staging/media/go7007/go7007-usb.c > +++ b/drivers/staging/media/go7007/go7007-usb.c > @@ -1110,9 +1110,6 @@ static int go7007_usb_probe(struct usb_interface *intf, > } else { > u16 channel; > > - /* set GPIO5 to be an output, currently low */ > - go7007_write_addr(go, 0x3c82, 0x0000); > - go7007_write_addr(go, 0x3c80, 0x00df); > /* read channel number from GPIO[1:0] */ > go7007_read_addr(go, 0x3c81,&channel); > channel&= 0x3; > @@ -1245,7 +1242,6 @@ static void go7007_usb_disconnect(struct usb_interface *intf) > struct urb *vurb, *aurb; > int i; > > - go->status = STATUS_SHUTDOWN; > usb_kill_urb(usb->intr_urb); > > /* Free USB-related structs */ > @@ -1269,6 +1265,7 @@ static void go7007_usb_disconnect(struct usb_interface *intf) > kfree(go->hpi_context); > > go7007_remove(go); > + go->status = STATUS_SHUTDOWN; > } > > static struct usb_driver go7007_usb_driver = { > diff --git a/drivers/staging/media/go7007/go7007-v4l2.c b/drivers/staging/media/go7007/go7007-v4l2.c > index 3ef4cd8..e31b338 100644 > --- a/drivers/staging/media/go7007/go7007-v4l2.c > +++ b/drivers/staging/media/go7007/go7007-v4l2.c > @@ -100,7 +100,7 @@ static int go7007_open(struct file *file) > > if (go->status != STATUS_ONLINE) > return -EBUSY; > - gofh = kmalloc(sizeof(struct go7007_file), GFP_KERNEL); > + gofh = kzalloc(sizeof(struct go7007_file), GFP_KERNEL); > if (gofh == NULL) > return -ENOMEM; > ++go->ref_count; > @@ -955,6 +955,7 @@ static int vidioc_streamon(struct file *file, void *priv, > } > mutex_unlock(&go->hw_lock); > mutex_unlock(&gofh->lock); > + call_all(&go->v4l2_dev, video, s_stream, 1); > > return retval; > } > @@ -970,6 +971,7 @@ static int vidioc_streamoff(struct file *file, void *priv, > mutex_lock(&gofh->lock); > go7007_streamoff(go); > mutex_unlock(&gofh->lock); > + call_all(&go->v4l2_dev, video, s_stream, 0); > > return 0; > } > @@ -1834,5 +1836,6 @@ void go7007_v4l2_remove(struct go7007 *go) > mutex_unlock(&go->hw_lock); > if (go->video_dev) > video_unregister_device(go->video_dev); > - v4l2_device_unregister(&go->v4l2_dev); > + if (go->status != STATUS_SHUTDOWN) > + v4l2_device_unregister(&go->v4l2_dev); > } > diff --git a/drivers/staging/media/go7007/wis-tw2804.c b/drivers/staging/media/go7007/wis-tw2804.c > index 9134f03..9afc5df 100644 > --- a/drivers/staging/media/go7007/wis-tw2804.c > +++ b/drivers/staging/media/go7007/wis-tw2804.c > @@ -21,16 +21,27 @@ > #include > #include > #include > +#include > +#include > > #include "wis-i2c.h" > > struct wis_tw2804 { > - int channel; > + struct v4l2_subdev sd; > + u8 channel:2; > + u8 input:1; > + u8 update:1; > + u8 auto_gain:1; > + u8 ckil:1; > int norm; > - int brightness; > - int contrast; > - int saturation; > - int hue; > + u8 brightness; > + u8 contrast; > + u8 saturation; > + u8 hue; > + u8 gain; > + u8 cr_gain; > + u8 r_balance; > + u8 b_balance; > }; > > static u8 global_registers[] = { > @@ -41,6 +52,7 @@ static u8 global_registers[] = { > 0x3d, 0x80, > 0x3e, 0x82, > 0x3f, 0x82, > + 0x78, 0x0f, > 0xff, 0xff, /* Terminator (reg 0xff does not exist) */ > }; > > @@ -103,29 +115,358 @@ static u8 channel_registers[] = { > 0xff, 0xff, /* Terminator (reg 0xff does not exist) */ > }; > > -static int write_reg(struct i2c_client *client, u8 reg, u8 value, int channel) > +static s32 write_reg(struct i2c_client *client, u8 reg, u8 value, u8 channel) > { > return i2c_smbus_write_byte_data(client, reg | (channel<< 6), value); > } > > -static int write_regs(struct i2c_client *client, u8 *regs, int channel) > +static int write_regs(struct i2c_client *client, u8 *regs, u8 channel) > { > int i; > > for (i = 0; regs[i] != 0xff; i += 2) > if (i2c_smbus_write_byte_data(client, > regs[i] | (channel<< 6), regs[i + 1])< 0) > - return -1; > + return -EINVAL; > return 0; > } > > +static s32 read_reg(struct i2c_client *client, u8 reg, u8 channel) > +{ > + return i2c_smbus_read_byte_data(client, (reg) | (channel<< 6)); > +} > + > +static inline struct wis_tw2804 *to_state(struct v4l2_subdev *sd) > +{ > + return container_of(sd, struct wis_tw2804, sd); > +} > + > +static int tw2804_log_status(struct v4l2_subdev *sd) > +{ > + struct wis_tw2804 *state = to_state(sd); > + v4l2_info(sd, "Standard: %s\n", state->norm == V4L2_STD_NTSC ? "NTSC" : > + state->norm == V4L2_STD_PAL ? "PAL" : "unknown"); > + v4l2_info(sd, "Channel: %d\n", state->channel); > + v4l2_info(sd, "Input: %d\n", state->input); > + v4l2_info(sd, "Brightness: %d\n", state->brightness); > + v4l2_info(sd, "Contrast: %d\n", state->contrast); > + v4l2_info(sd, "Saturation: %d\n", state->saturation); > + v4l2_info(sd, "Hue: %d\n", state->hue); > + return 0; > +} > + > +static int tw2804_queryctrl(struct v4l2_subdev *sd, struct v4l2_queryctrl *query) > +{ > + static const u32 user_ctrls[] = { > + V4L2_CID_USER_CLASS, > + V4L2_CID_BRIGHTNESS, > + V4L2_CID_CONTRAST, > + V4L2_CID_SATURATION, > + V4L2_CID_HUE, > + V4L2_CID_AUTOGAIN, > + V4L2_CID_COLOR_KILLER, > + V4L2_CID_GAIN, > + V4L2_CID_CHROMA_GAIN, > + V4L2_CID_BLUE_BALANCE, > + V4L2_CID_RED_BALANCE, > + 0 > + }; > + > + static const u32 *ctrl_classes[] = { > + user_ctrls, > + NULL > + }; > + > + query->id = v4l2_ctrl_next(ctrl_classes, query->id); > + > + switch (query->id) { > + case V4L2_CID_USER_CLASS: > + return v4l2_ctrl_query_fill(query, 0, 0, 0, 0); > + case V4L2_CID_BRIGHTNESS: > + return v4l2_ctrl_query_fill(query, 0, 255, 1, 128); > + case V4L2_CID_CONTRAST: > + return v4l2_ctrl_query_fill(query, 0, 255, 1, 128); > + case V4L2_CID_SATURATION: > + return v4l2_ctrl_query_fill(query, 0, 255, 1, 128); > + case V4L2_CID_HUE: > + return v4l2_ctrl_query_fill(query, 0, 255, 1, 128); > + case V4L2_CID_AUTOGAIN: > + return v4l2_ctrl_query_fill(query, 0, 1, 1, 0); > + case V4L2_CID_COLOR_KILLER: > + return v4l2_ctrl_query_fill(query, 0, 1, 1, 0); > + case V4L2_CID_GAIN: > + return v4l2_ctrl_query_fill(query, 0, 255, 1, 128); > + case V4L2_CID_CHROMA_GAIN: > + return v4l2_ctrl_query_fill(query, 0, 255, 1, 128); > + case V4L2_CID_BLUE_BALANCE: > + return v4l2_ctrl_query_fill(query, 0, 255, 1, 122); > + case V4L2_CID_RED_BALANCE: > + return v4l2_ctrl_query_fill(query, 0, 255, 1, 122); > + default: > + return -EINVAL; > + } > +} > + > +s32 get_ctrl_addr(int ctrl) > +{ > + switch (ctrl) { > + case V4L2_CID_BRIGHTNESS: > + return 0x12; > + case V4L2_CID_CONTRAST: > + return 0x11; > + case V4L2_CID_SATURATION: > + return 0x10; > + case V4L2_CID_HUE: > + return 0x0f; > + case V4L2_CID_AUTOGAIN: > + return 0x02; > + case V4L2_CID_COLOR_KILLER: > + return 0x14; > + case V4L2_CID_GAIN: > + return 0x3c; > + case V4L2_CID_CHROMA_GAIN: > + return 0x3d; > + case V4L2_CID_RED_BALANCE: > + return 0x3f; > + case V4L2_CID_BLUE_BALANCE: > + return 0x3e; > + default: > + return -EINVAL; > + } > +} > + > +static int tw2804_g_ctrl(struct v4l2_subdev *sd, struct v4l2_control *ctrl) > +{ > + struct wis_tw2804 *state = to_state(sd); > + struct i2c_client *client = v4l2_get_subdevdata(sd); > + s32 addr = get_ctrl_addr(ctrl->id); > + s32 val = 0; > + > + if (addr == -EINVAL) > + return -EINVAL; > + > + if (state->update) { > + val = read_reg(client, addr, ctrl->id == V4L2_CID_GAIN || > + ctrl->id == V4L2_CID_CHROMA_GAIN || > + ctrl->id == V4L2_CID_RED_BALANCE || > + ctrl->id == V4L2_CID_BLUE_BALANCE ? 0 : state->channel); > + if (val< 0) > + return val; > + } > + > + switch (ctrl->id) { > + case V4L2_CID_BRIGHTNESS: > + if (state->update) > + state->brightness = val; > + ctrl->value = state->brightness; > + break; > + case V4L2_CID_CONTRAST: > + if (state->update) > + state->contrast = val; > + ctrl->value = state->contrast; > + break; > + case V4L2_CID_SATURATION: > + if (state->update) > + state->saturation = val; > + ctrl->value = state->saturation; > + break; > + case V4L2_CID_HUE: > + if (state->update) > + state->hue = val; > + ctrl->value = state->hue; > + break; > + case V4L2_CID_AUTOGAIN: > + if (state->update) > + state->auto_gain = val& (1<<7) ? 1 : 0; > + ctrl->value = state->auto_gain; > + break; > + case V4L2_CID_COLOR_KILLER: > + if (state->update) > + state->ckil = (val& 0x03) == 0x03 ? 1 : 0; > + ctrl->value = state->ckil; > + break; > + case V4L2_CID_GAIN: > + if (state->update) > + state->gain = val; > + ctrl->value = state->gain; > + break; > + case V4L2_CID_CHROMA_GAIN: > + if (state->update) > + state->cr_gain = val; > + ctrl->value = state->cr_gain; > + break; > + case V4L2_CID_RED_BALANCE: > + if (state->update) > + state->r_balance = val; > + ctrl->value = state->r_balance; > + break; > + case V4L2_CID_BLUE_BALANCE: > + if (state->update) > + state->b_balance = val; > + ctrl->value = state->b_balance; > + break; > + default: > + return -EINVAL; > + } > + > + state->update = 0; > + return 0; > +} > + > +static int tw2804_s_ctrl(struct v4l2_subdev *sd, struct v4l2_control *ctrl) > +{ > + struct wis_tw2804 *dec = to_state(sd); > + struct i2c_client *client = v4l2_get_subdevdata(sd); > + s32 reg = 0; > + s32 addr = get_ctrl_addr(ctrl->id); > + > + if (addr == -EINVAL) > + return -EINVAL; > + > + switch (ctrl->id) { > + case V4L2_CID_AUTOGAIN: > + reg = read_reg(client, addr, dec->channel); > + if (reg> 0) { > + if (ctrl->value == 0) > + ctrl->value = reg& ~(1<<7); > + else > + ctrl->value = reg | 1<<7; > + } else > + return reg; > + break; > + case V4L2_CID_COLOR_KILLER: > + reg = read_reg(client, addr, dec->channel); > + if (reg> 0) > + ctrl->value = (reg& ~(0x03)) | (ctrl->value == 0 ? 0x02 : 0x03); > + else > + return reg; > + break; > + default: > + break; > + } > + > + ctrl->value = ctrl->value> 255 ? 255 : (ctrl->value< 0 ? 0 : ctrl->value); > + reg = write_reg(client, addr, (u8)ctrl->value, ctrl->id == V4L2_CID_GAIN || > + ctrl->id == V4L2_CID_CHROMA_GAIN || > + ctrl->id == V4L2_CID_RED_BALANCE || > + ctrl->id == V4L2_CID_BLUE_BALANCE ? 0 : dec->channel); > + > + if (reg< 0) { > + v4l2_err(&dec->sd, "Can`t set_ctrl value:id=%d;value=%d\n", ctrl->id, ctrl->value); > + return reg; > + } > + > + dec->update = 1; > + return tw2804_g_ctrl(sd, ctrl); > +} > + > +static int tw2804_s_std(struct v4l2_subdev *sd, v4l2_std_id norm) > +{ > + struct wis_tw2804 *dec = to_state(sd); > + struct i2c_client *client = v4l2_get_subdevdata(sd); > + > + u8 regs[] = { > + 0x01, norm&V4L2_STD_NTSC ? 0xc4 : 0x84, > + 0x09, norm&V4L2_STD_NTSC ? 0x07 : 0x04, > + 0x0a, norm&V4L2_STD_NTSC ? 0xf0 : 0x20, > + 0x0b, norm&V4L2_STD_NTSC ? 0x07 : 0x04, > + 0x0c, norm&V4L2_STD_NTSC ? 0xf0 : 0x20, > + 0x0d, norm&V4L2_STD_NTSC ? 0x40 : 0x4a, > + 0x16, norm&V4L2_STD_NTSC ? 0x00 : 0x40, > + 0x17, norm&V4L2_STD_NTSC ? 0x00 : 0x40, > + 0x20, norm&V4L2_STD_NTSC ? 0x07 : 0x0f, > + 0x21, norm&V4L2_STD_NTSC ? 0x07 : 0x0f, > + 0xff, 0xff, > + }; > + write_regs(client, regs, dec->channel); > + dec->norm = norm; > + return 0; > +} > + > +static const struct v4l2_subdev_core_ops tw2804_core_ops = { > + .log_status = tw2804_log_status, > + .g_ctrl = tw2804_g_ctrl, > + .s_ctrl = tw2804_s_ctrl, > + .queryctrl = tw2804_queryctrl, > + .s_std = tw2804_s_std, > +}; > + > +static int tw2804_s_video_routing(struct v4l2_subdev *sd, u32 input, u32 output, > + u32 config) > +{ > + struct wis_tw2804 *dec = to_state(sd); > + struct i2c_client *client = v4l2_get_subdevdata(sd); > + s32 reg = 0; > + > + if (0> input || input> 1) > + return -EINVAL; > + > + if (input == dec->input&& !dec->update) > + return 0; > + > + reg = read_reg(client, 0x22, dec->channel); > + > + if (reg>= 0) { > + if (input == 0) > + reg&= ~(1<<2); > + else > + reg |= 1<<2; > + reg = write_reg(client, 0x22, (u8)reg, dec->channel); > + } > + > + if (reg>= 0) { > + dec->input = input; > + dec->update = 0; > + } else > + return reg; > + return 0; > +} > + > +static int tw2804_s_mbus_fmt(struct v4l2_subdev *sd, > + struct v4l2_mbus_framefmt *fmt) > +{ > + /*TODO need select between 3fmt: > + * bt_656, > + * bt_601_8bit, > + * bt_656_dual, > + */ > + return 0; > +} > + > +int tw2804_s_stream(struct v4l2_subdev *sd, int enable) > +{ > + struct wis_tw2804 *dec = to_state(sd); > + struct i2c_client *client = v4l2_get_subdevdata(sd); > + u32 reg = read_reg(client, 0x78, 0); > + > + if (enable == 1) > + write_reg(client, 0x78, reg& ~(1<channel), 0); > + else > + write_reg(client, 0x78, reg | (1<channel), 0); > + > + return 0; > +} > + > +static const struct v4l2_subdev_video_ops tw2804_video_ops = { > + .s_routing = tw2804_s_video_routing, > + .s_mbus_fmt = tw2804_s_mbus_fmt, > + .s_stream = tw2804_s_stream, > +}; > + > +static const struct v4l2_subdev_ops tw2804_ops = { > + .core =&tw2804_core_ops, > + .video =&tw2804_video_ops, > +}; > + > static int wis_tw2804_command(struct i2c_client *client, > unsigned int cmd, void *arg) > { > - struct wis_tw2804 *dec = i2c_get_clientdata(client); > + struct v4l2_subdev *sd = i2c_get_clientdata(client); > + struct wis_tw2804 *dec = to_state(sd); > + int *input; > > if (cmd == DECODER_SET_CHANNEL) { > - int *input = arg; > + input = arg; > > if (*input< 0 || *input> 3) { > printk(KERN_ERR "wis-tw2804: channel %d is not " > @@ -154,139 +495,6 @@ static int wis_tw2804_command(struct i2c_client *client, > "channel number is set\n", cmd); > return 0; > } > - > - switch (cmd) { > - case VIDIOC_S_STD: > - { > - v4l2_std_id *input = arg; > - u8 regs[] = { > - 0x01, *input& V4L2_STD_NTSC ? 0xc4 : 0x84, > - 0x09, *input& V4L2_STD_NTSC ? 0x07 : 0x04, > - 0x0a, *input& V4L2_STD_NTSC ? 0xf0 : 0x20, > - 0x0b, *input& V4L2_STD_NTSC ? 0x07 : 0x04, > - 0x0c, *input& V4L2_STD_NTSC ? 0xf0 : 0x20, > - 0x0d, *input& V4L2_STD_NTSC ? 0x40 : 0x4a, > - 0x16, *input& V4L2_STD_NTSC ? 0x00 : 0x40, > - 0x17, *input& V4L2_STD_NTSC ? 0x00 : 0x40, > - 0x20, *input& V4L2_STD_NTSC ? 0x07 : 0x0f, > - 0x21, *input& V4L2_STD_NTSC ? 0x07 : 0x0f, > - 0xff, 0xff, > - }; > - write_regs(client, regs, dec->channel); > - dec->norm = *input; > - break; > - } > - case VIDIOC_QUERYCTRL: > - { > - struct v4l2_queryctrl *ctrl = arg; > - > - switch (ctrl->id) { > - case V4L2_CID_BRIGHTNESS: > - ctrl->type = V4L2_CTRL_TYPE_INTEGER; > - strncpy(ctrl->name, "Brightness", sizeof(ctrl->name)); > - ctrl->minimum = 0; > - ctrl->maximum = 255; > - ctrl->step = 1; > - ctrl->default_value = 128; > - ctrl->flags = 0; > - break; > - case V4L2_CID_CONTRAST: > - ctrl->type = V4L2_CTRL_TYPE_INTEGER; > - strncpy(ctrl->name, "Contrast", sizeof(ctrl->name)); > - ctrl->minimum = 0; > - ctrl->maximum = 255; > - ctrl->step = 1; > - ctrl->default_value = 128; > - ctrl->flags = 0; > - break; > - case V4L2_CID_SATURATION: > - ctrl->type = V4L2_CTRL_TYPE_INTEGER; > - strncpy(ctrl->name, "Saturation", sizeof(ctrl->name)); > - ctrl->minimum = 0; > - ctrl->maximum = 255; > - ctrl->step = 1; > - ctrl->default_value = 128; > - ctrl->flags = 0; > - break; > - case V4L2_CID_HUE: > - ctrl->type = V4L2_CTRL_TYPE_INTEGER; > - strncpy(ctrl->name, "Hue", sizeof(ctrl->name)); > - ctrl->minimum = 0; > - ctrl->maximum = 255; > - ctrl->step = 1; > - ctrl->default_value = 128; > - ctrl->flags = 0; > - break; > - } > - break; > - } > - case VIDIOC_S_CTRL: > - { > - struct v4l2_control *ctrl = arg; > - > - switch (ctrl->id) { > - case V4L2_CID_BRIGHTNESS: > - if (ctrl->value> 255) > - dec->brightness = 255; > - else if (ctrl->value< 0) > - dec->brightness = 0; > - else > - dec->brightness = ctrl->value; > - write_reg(client, 0x12, dec->brightness, dec->channel); > - break; > - case V4L2_CID_CONTRAST: > - if (ctrl->value> 255) > - dec->contrast = 255; > - else if (ctrl->value< 0) > - dec->contrast = 0; > - else > - dec->contrast = ctrl->value; > - write_reg(client, 0x11, dec->contrast, dec->channel); > - break; > - case V4L2_CID_SATURATION: > - if (ctrl->value> 255) > - dec->saturation = 255; > - else if (ctrl->value< 0) > - dec->saturation = 0; > - else > - dec->saturation = ctrl->value; > - write_reg(client, 0x10, dec->saturation, dec->channel); > - break; > - case V4L2_CID_HUE: > - if (ctrl->value> 255) > - dec->hue = 255; > - else if (ctrl->value< 0) > - dec->hue = 0; > - else > - dec->hue = ctrl->value; > - write_reg(client, 0x0f, dec->hue, dec->channel); > - break; > - } > - break; > - } > - case VIDIOC_G_CTRL: > - { > - struct v4l2_control *ctrl = arg; > - > - switch (ctrl->id) { > - case V4L2_CID_BRIGHTNESS: > - ctrl->value = dec->brightness; > - break; > - case V4L2_CID_CONTRAST: > - ctrl->value = dec->contrast; > - break; > - case V4L2_CID_SATURATION: > - ctrl->value = dec->saturation; > - break; > - case V4L2_CID_HUE: > - ctrl->value = dec->hue; > - break; > - } > - break; > - } > - default: > - break; > - } > return 0; > } > > @@ -295,21 +503,28 @@ static int wis_tw2804_probe(struct i2c_client *client, > { > struct i2c_adapter *adapter = client->adapter; > struct wis_tw2804 *dec; > + struct v4l2_subdev *sd; > > if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_BYTE_DATA)) > return -ENODEV; > > - dec = kmalloc(sizeof(struct wis_tw2804), GFP_KERNEL); > + dec = kzalloc(sizeof(struct wis_tw2804), GFP_KERNEL); > + > if (dec == NULL) > return -ENOMEM; > - > + sd =&dec->sd; > + dec->update = 1; > dec->channel = -1; > dec->norm = V4L2_STD_NTSC; > dec->brightness = 128; > dec->contrast = 128; > dec->saturation = 128; > dec->hue = 128; > - i2c_set_clientdata(client, dec); > + dec->gain = 128; > + dec->cr_gain = 128; > + dec->b_balance = 122; > + dec->r_balance = 122; > + v4l2_i2c_subdev_init(sd, client,&tw2804_ops); > > printk(KERN_DEBUG "wis-tw2804: creating TW2804 at address %d on %s\n", > client->addr, adapter->name); > @@ -319,9 +534,10 @@ static int wis_tw2804_probe(struct i2c_client *client, > > static int wis_tw2804_remove(struct i2c_client *client) > { > - struct wis_tw2804 *dec = i2c_get_clientdata(client); > + struct v4l2_subdev *sd = i2c_get_clientdata(client); > > - kfree(dec); > + v4l2_device_unregister_subdev(sd); > + kfree(to_state(sd)); > return 0; > } > Justin P. Mattock