From mboxrd@z Thu Jan  1 00:00:00 1970
From: Heiko Schocher <hs@denx.de>
Date: Mon, 02 Jul 2012 06:53:50 +0200
Subject: [U-Boot] [PATCH v2] arm,davinci: update for enbw_cmc board
In-Reply-To: <1337063054-25508-1-git-send-email-hs@denx.de>
References: <1336199570-22151-1-git-send-email-hs@denx.de>
	<1337063054-25508-1-git-send-email-hs@denx.de>
Message-ID: <4FF1295E.6050809@denx.de>
List-Id: <u-boot.lists.denx.de>
MIME-Version: 1.0
Content-Type: text/plain; charset="us-ascii"
Content-Transfer-Encoding: 7bit
To: u-boot@lists.denx.de

Hello Tom,

On 15.05.2012 08:24, Heiko Schocher wrote:
> - change gpio pin settings:
>
>    - gpio pin 6[13] (PLC reset) default value low
>    - gpio pin 6[0] (TPM reset) default value low
>    - 4 new GPIO pins
>        pin  i/o   name
>      - 3[9] input Board Type
>      - 2[7] input HW-ID0
>      - 2[6] input HW-ID1
>      - 2[3] input HW-ID2
>
> - read board type and hw id from gpio pins on the enbw_cmc board,
>    and use board type for setting up different gpio pin settings.
>
> - do not pass "davinci_mmc.use_dma=0" to linux, as MMC now
>    works with DMA.
>
> - update logbuf support:
>    store post word in RTC scratch register
>
> - add support for configuring KSZ8864RMN switch through
>    a config file on u-boot startup. For more infos see:
>    doc/README.switch_config
>
> Signed-off-by: Heiko Schocher<hs@denx.de>
> Cc: Wolfgang Denk<wd@denx.de>
> Cc: Tom Rini<tom.rini@gmail.com>
> Cc: Christian Riesch<christian.riesch@omicron.at>
> Cc: Sandeep Paulraj<s-paulraj@ti.com>
>
> ---
> changes for v2:
> - add comment from Tom Rini:
>    remove ELDK-4.2 compiler warning:
>    enbw_cmc.c: In function 'enbw_cmc_getvalue':
>    enbw_cmc.c:447: warning: dereferencing type-punned pointer will break strict-aliasing rules
>
> $ ./tools/checkpatch.pl 0001-arm-davinci-update-for-enbw_cmc-board.patch
> total: 0 errors, 0 warnings, 498 lines checked
>
> NOTE: Ignored message types: COMPLEX_MACRO CONSIDER_KSTRTO MINMAX MULTISTATEMENT_MACRO_USE_DO_WHILE
>
> 0001-arm-davinci-update-for-enbw_cmc-board.patch has no obvious style problems and is ready for submission.

Tom? Are there more issues with this patch?

bye,
Heiko
-- 
DENX Software Engineering GmbH,     MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany