All of lore.kernel.org
 help / color / mirror / Atom feed
From: Roland Stigge <stigge@antcom.de>
To: linux-mmc@vger.kernel.org
Cc: rmk+kernel@arm.linux.org.uk,
	Grant Likely <grant.likely@secretlab.ca>,
	cjb@laptop.org, Alexandre Pereira da Silva <aletes.xgr@gmail.com>
Subject: mmci.c regression
Date: Mon, 02 Jul 2012 14:14:26 +0200	[thread overview]
Message-ID: <4FF190A2.6@antcom.de> (raw)

Hi,

I'm getting a strange regression with mmci.c at v3.5-rc4 -> v3.5-rc5: Bootup:

v3.5-rc4:

mmci-pl18x 20098000.sd: mmc0: PL180 manf 41 rev0 at 0x20098000 irq 15,13 (pio)
mmci-pl18x 20098000.sd: no DMA platform data
mmc0: new SD card at address bd34
mmcblk0: mmc0:bd34 SD02G 1.83 GiB 
mmcblk0: error -5 transferring data, sector 0, nr 8, cmd response 0x900, card status 0xb00
mmcblk0: retrying using single block read
 mmcblk0: p1

v3.5-rc5:

mmci-pl18x 20098000.sd: mmc0: PL180 manf 41 rev0 at 0x20098000 irq 15,13 (pio)
mmci-pl18x 20098000.sd: no DMA platform data
mmc0: new SD card at address bd34
mmcblk0: mmc0:bd34 SD02G 1.83 GiB 
mmcblk0: error -5 transferring data, sector 0, nr 8, cmd response 0x0, card status 0x900
mmcblk0: retrying using single block read
mmcblk0: error -5 transferring data, sector 0, nr 8, cmd response 0x0, card status 0x0
end_request: I/O error, dev mmcblk0, sector 0
mmcblk0: error -5 transferring data, sector 1, nr 7, cmd response 0x0, card status 0x0
end_request: I/O error, dev mmcblk0, sector 1
mmcblk0: error -5 transferring data, sector 2, nr 6, cmd response 0x0, card status 0x0
end_request: I/O error, dev mmcblk0, sector 2
Buffer I/O error on device mmcblk0, logical block 0
 mmcblk0: unable to read partition table

This happens on bootup with _some_ cards that already have the "error -5" in v3.5-rc4. This
was ok where up to v3.5-rc4, it worked on a subsequent retry as above. Unfortunately, it
now fails with v3.5-rc5.

Unfortunately, I can't see a relevant change in the mmci driver or mmc host code.
An indirect timing issue on bootup?

Inserting cards _after_ bootup generally works. SoC is LPC32XX.

Thanks in advance.

Roland

             reply	other threads:[~2012-07-02 12:14 UTC|newest]

Thread overview: 3+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2012-07-02 12:14 Roland Stigge [this message]
2012-07-02 13:07 ` mmci.c regression Russell King - ARM Linux
2012-07-02 14:08   ` Roland Stigge

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=4FF190A2.6@antcom.de \
    --to=stigge@antcom.de \
    --cc=aletes.xgr@gmail.com \
    --cc=cjb@laptop.org \
    --cc=grant.likely@secretlab.ca \
    --cc=linux-mmc@vger.kernel.org \
    --cc=rmk+kernel@arm.linux.org.uk \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body. 
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.