From mboxrd@z Thu Jan  1 00:00:00 1970
From: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Date: Sun, 13 Jun 2010 20:50:06 +0200
Subject: [Buildroot] [PATCH 02/10] Remove old Linux infrastructure
In-Reply-To: <cover.1276454802.git.thomas.petazzoni@free-electrons.com>
References: <cover.1276454802.git.thomas.petazzoni@free-electrons.com>
Message-ID: <4a1da1ebf0f2d3a485125d290785d737c2308073.1276454802.git.thomas.petazzoni@free-electrons.com>
List-Id: <buildroot.busybox.net>
MIME-Version: 1.0
Content-Type: text/plain; charset="us-ascii"
Content-Transfer-Encoding: 7bit
To: buildroot@busybox.net

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
---
 Makefile                          |    4 -
 target/Makefile.in                |   16 --
 target/linux/Config.in            |   33 ---
 target/linux/Config.in.advanced   |  463 --------------------------------
 target/linux/Config.in.versions   |   62 -----
 target/linux/Makefile.in          |  250 -----------------
 target/linux/Makefile.in.advanced |  532 -------------------------------------
 7 files changed, 0 insertions(+), 1360 deletions(-)
 delete mode 100644 target/linux/Config.in
 delete mode 100644 target/linux/Config.in.advanced
 delete mode 100644 target/linux/Config.in.versions
 delete mode 100644 target/linux/Makefile.in
 delete mode 100644 target/linux/Makefile.in.advanced

diff --git a/Makefile b/Makefile
index a72dc80..d04c6e3 100644
--- a/Makefile
+++ b/Makefile
@@ -308,10 +308,6 @@ else ifeq ($(BR2_TOOLCHAIN_EXTERNAL),y)
 include toolchain/*/*.mk
 endif
 
-ifeq ($(BR2_PACKAGE_LINUX),y)
-TARGETS+=linux26-modules
-endif
-
 include package/*/*.mk
 
 TARGETS+=target-finalize
diff --git a/target/Makefile.in b/target/Makefile.in
index 8feb564..9a75116 100644
--- a/target/Makefile.in
+++ b/target/Makefile.in
@@ -1,7 +1,3 @@
-BR2_PACKAGE_LINUX_FORMAT:=$(call qstrip,$(BR2_PACKAGE_LINUX_FORMAT))
-BR2_PACKAGE_LINUX_KCONFIG:=$(call qstrip,$(BR2_PACKAGE_LINUX_KCONFIG))
-
-
 # COPY_FILE absolute_path_to_file, target_directory, filename
 ifneq ($(call qstrip,$(BUILDROOT_COPYTO)),)	# Use shell definition
 define COPY_FILE
@@ -56,16 +52,4 @@ include target/generic/Makefile.in
 include target/device/Makefile.in
 include target/xtensa/Makefile.in
 
-# kernel rules
-# We already did add the kernel target to TARGETS and now just pull in the rules
-# to actually build this target.
-
-ifeq ($(BR2_KERNEL_LINUX),y)
-include target/linux/Makefile.in
-endif
-
-ifeq ($(BR2_KERNEL_LINUX_ADVANCED),y)
-include target/linux/Makefile.in.advanced
-endif
-
 include target/device/Makefile.in.linux
diff --git a/target/linux/Config.in b/target/linux/Config.in
deleted file mode 100644
index c79fca2..0000000
--- a/target/linux/Config.in
+++ /dev/null
@@ -1,33 +0,0 @@
-#comment "Linux kernel options"
-
-if BR2_KERNEL_LINUX
-config BR2_PACKAGE_LINUX_KCONFIG
-	string ".config file"
-	depends on BR2_PACKAGE_LINUX
-	default ""
-	help
-	  kernel's .config to use to build a kernel for the target.
-
-	  If the above setting is empty, you can change the default
-	  board-imposed value by passing LINUX26_KCONFIG=<path> to
-	  make.
-
-config BR2_PACKAGE_LINUX_FORMAT
-	string "kernel binary format"
-	depends on BR2_PACKAGE_LINUX
-	default ""
-	help
-	  kernel binary format.
-	  Popular values include:
-	  - bzImage
-	  - zImage
-	  and other, architecture dependant formats.
-
-	  Note that the default format is supposed to be set by your
-	  board-description, if any.
-	  i386 and compatible default to bzImage if nothing was given
-	  above.
-	  If the above setting is empty, you can change the default
-	  board-imposed value by passing LINUX26_FORMAT=<string> to
-	  make.
-endif
diff --git a/target/linux/Config.in.advanced b/target/linux/Config.in.advanced
deleted file mode 100644
index 645ed2e..0000000
--- a/target/linux/Config.in.advanced
+++ /dev/null
@@ -1,463 +0,0 @@
-if BR2_KERNEL_LINUX_ADVANCED
-# --- "Linux kernel options"
-# This file exports the following symbols for use by Makefile's
-#
-# BR2_PACKAGE_LINUX
-#
-# BR2_KERNEL_SITE
-# BR2_DOWNLOAD_LINUX26_VERSION
-# BR2_LINUX26_VERSION
-#
-# BR2_KERNEL_PATCH_SITE
-# BR2_KERNEL_PATCH
-#
-# BR2_LINUX26_CUSTOM
-# BR2_CUSTOM_LINUX26_PATCH_SITE
-# BR2_CUSTOM_LINUX26_PATCH
-#
-# BR2_LINUX_BSP_PATCH
-#
-# BR2_PACKAGE_LINUX_USE_KCONFIG
-# BR2_PACKAGE_LINUX_USE_DEFCONFIG
-# BR2_PACKAGE_LINUX_USE_XCONFIG
-# BR2_PACKAGE_LINUX_KCONFIG
-#
-# BR2_PACKAGE_LINUX_FORMAT
-#
-# BR2_LINUX_COPYTO_ROOTFS
-# BR2_LINUX_COPYTO_TFTPBOOT
-# BR2_LINUX_COPYTO
-#
-
-source "target/linux/Config.in.versions"
-
-config BR2_KERNEL_PATCH_LEVEL
-	string
-	default $(BR2_KERNEL_LATEST_2_6_33) if BR2_LINUX_2_6_33 && BR2_KERNEL_ADD_LATEST_MINORPATCH
-	default $(BR2_KERNEL_LATEST_2_6_32) if BR2_LINUX_2_6_32 && BR2_KERNEL_ADD_LATEST_MINORPATCH
-	default $(BR2_KERNEL_LATEST_2_6_31) if BR2_LINUX_2_6_31 && BR2_KERNEL_ADD_LATEST_MINORPATCH
-	default $(BR2_KERNEL_LATEST_2_6_30) if BR2_LINUX_2_6_30 && BR2_KERNEL_ADD_LATEST_MINORPATCH
-	default $(BR2_KERNEL_LATEST_2_6_29) if BR2_LINUX_2_6_29 && BR2_KERNEL_ADD_LATEST_MINORPATCH
-	default $(BR2_KERNEL_LATEST_2_6_28) if BR2_LINUX_2_6_28 && BR2_KERNEL_ADD_LATEST_MINORPATCH
-	default $(BR2_KERNEL_LATEST_2_6_27) if BR2_LINUX_2_6_27 && BR2_KERNEL_ADD_LATEST_MINORPATCH
-	default "$(BR2_KERNEL_MINORLEVEL)" if BR2_KERNEL_ADD_MINORPATCH
-
-config BR2_KERNEL_NEXT_VERSION
-	string
-	default "2.6.34" if BR2_LINUX_2_6_33
-	default "2.6.33" if BR2_LINUX_2_6_32
-	default "2.6.32" if BR2_LINUX_2_6_31
-	default "2.6.31" if BR2_LINUX_2_6_30
-	default "2.6.30" if BR2_LINUX_2_6_29
-	default "2.6.29" if BR2_LINUX_2_6_28
-	default "2.6.28" if BR2_LINUX_2_6_27
-
-config BR2_KERNEL_THIS_VERSION
-	string
-	default "2.6.33" if BR2_LINUX_2_6_33
-	default "2.6.32" if BR2_LINUX_2_6_32
-	default "2.6.31" if BR2_LINUX_2_6_31
-	default "2.6.30" if BR2_LINUX_2_6_30
-	default "2.6.29" if BR2_LINUX_2_6_29
-	default "2.6.28" if BR2_LINUX_2_6_28
-	default "2.6.27" if BR2_LINUX_2_6_27
-
-config BR2_KERNEL_SITE
-	string
-	default "http://ftp.kernel.org/pub/linux/kernel/v2.6"
-
-config BR2_KERNEL_PATCH_SITE
-	string
-	default "$(BR2_KERNEL_SITE)" if 			BR2_KERNEL_ADD_LATEST_MINORPATCH
-	default "$(BR2_KERNEL_SITE)" if 			BR2_KERNEL_ADD_MINORPATCH
-	default "$(BR2_KERNEL_SITE)/testing" if 		BR2_KERNEL_ADD_LATEST_RC_PATCH
-	default "$(BR2_KERNEL_SITE)/testing" if 		BR2_KERNEL_ADD_RC_PATCH
-	default "$(BR2_KERNEL_SITE)/snapshots" if 		BR2_KERNEL_ADD_LATEST_SNAPSHOT
-	default "$(BR2_KERNEL_SITE)/snapshots" if 		BR2_KERNEL_ADD_SNAPSHOT
-	default $(BR2_CUSTOM_LINUX26_PATCH_SITE) if 		BR2_LINUX26_CUSTOM
-
-config BR2_LINUX26_RC_VERSION
-	string
-	default "$(BR2_KERNEL_NEXT_VERSION)-rc$(BR2_KERNEL_RC_LEVEL)" if BR2_KERNEL_ADD_RC_PATCH
-
-config BR2_LINUX26_SNAPSHOT_VERSION
-	string
-	default "$(BR2_KERNEL_THIS_VERSION)-git$(BR2_KERNEL_GIT_LEVEL)" if BR2_KERNEL_ADD_SNAPSHOT
-
-config BR2_LINUX26_RC_SNAPSHOT_VERSION
-	string
-	default "$(BR2_KERNEL_NEXT_VERSION)-rc$(BR2_KERNEL_RC_LEVEL)-git$(BR2_KERNEL_GIT_LEVEL)" if BR2_KERNEL_ADD_SNAPSHOT
-
-# ---------------------------------------------------------------------------
-
-choice
-	prompt "Linux Kernel Version"
-	default BR2_LINUX_2_6_STABLE
-	help
-	  Select the specific Linux version you want to use
-
-config BR2_LINUX_2_6_STABLE
-	bool "The latest stable Linux kernel (2.6.33.4)"
-
-config BR2_LINUX_2_6_33
-	bool "Linux 2.6.33"
-	select BR2_KERNEL_BASE
-
-config BR2_LINUX_2_6_32
-	bool "Linux 2.6.32"
-	select BR2_KERNEL_BASE
-
-config BR2_LINUX_2_6_31
-	bool "Linux 2.6.31"
-	select BR2_KERNEL_BASE
-
-config BR2_LINUX_2_6_30
-	bool "Linux 2.6.30"
-	select BR2_KERNEL_BASE
-
-config BR2_LINUX_2_6_29
-	bool "Linux 2.6.29"
-	select BR2_KERNEL_BASE
-
-config BR2_LINUX_2_6_28
-	bool "Linux 2.6.28"
-	select BR2_KERNEL_BASE
-
-config BR2_LINUX_2_6_27
-	bool "Linux 2.6.27"
-	select BR2_KERNEL_BASE
-
-config BR2_LINUX26_CUSTOM
-	bool "Linux <custom> version"
-
-endchoice
-
-if BR2_LINUX26_CUSTOM
-config BR2_CUSTOM_DOWNLOAD_LINUX26_VERSION
-	string "Linux Tarball version"
-	default "2.6.31"
-	help
-	  Specify any .tar.bz2 file
-
-config BR2_CUSTOM_LINUX26_VERSION
-	string "Linux Version"
-	default "2.6.31"
-	help
-	  Specify what the linux version will be called
-
-config BR2_CUSTOM_LINUX26_PATCH
-	string "patch name"
-	default "patch-2.6.31-rc4.bz2"
-	help
-	  Specify a patch to be downloaded
-
-config BR2_CUSTOM_LINUX26_PATCH_SITE
-	string "patch site"
-	default "http://www.kernel.org/pub/linux/kernel/v2.6/testing"
-	help
-	  Specify from where the patch will be downloaded.
-endif
-
-# -----------------------------------------------
-
-menu "Patches"
-	depends on BR2_PACKAGE_LINUX
-
-config BR2_KERNEL_ADD_KERNEL_ORG_PATCH
-	bool "Add kernel.org patch"
-	depends on BR2_KERNEL_BASE
-	help
-	  Add pre, snapshot or -mm patches
-	  from http://www.kernel.org/
-
-config BR2_KERNEL_ADD_LATEST
-	bool "Use only the latest patch version"
-	default y
-	depends on BR2_KERNEL_ADD_KERNEL_ORG_PATCH
-	help
-	  Restrict the choices to the latest versions
-
-choice
-	prompt "Add a kernel.org patch to the Linux Kernel"
-	depends on BR2_PACKAGE_LINUX
-	depends on !BR2_KERNEL_PREPATCHED
-	depends on BR2_KERNEL_ADD_KERNEL_ORG_PATCH
-	help
-	  Select a patch to add to the Linux kernel
-
-config BR2_KERNEL_ADD_LATEST_MINORPATCH
-	bool "Add _latest_ '.#' minor patch"
-	depends on BR2_KERNEL_ADD_LATEST
-	select BR2_KERNEL_ADD_PATCH
-
-config BR2_KERNEL_ADD_MINORPATCH
-	bool "Add a '.#' minor patch"
-	depends on !BR2_KERNEL_ADD_LATEST
-	select BR2_KERNEL_ADD_PATCH
-
-config BR2_KERNEL_ADD_LATEST_RC_PATCH
-	bool "Add _latest_ '-rc#' patch"
-	depends on BR2_KERNEL_ADD_LATEST
-	select BR2_KERNEL_ADD_PATCH
-
-config BR2_KERNEL_ADD_RC_PATCH
-	bool "Add an '-rc#' patch"
-	depends on !BR2_KERNEL_ADD_LATEST
-	select BR2_KERNEL_ADD_PATCH
-
-config BR2_KERNEL_ADD_LATEST_SNAPSHOT
-	bool "Add _latest_ 'snapshot' patch"
-	depends on BR2_KERNEL_ADD_LATEST
-	select BR2_KERNEL_ADD_PATCH
-
-config BR2_KERNEL_ADD_SNAPSHOT
-	bool "Add a 'snapshot' patch (linux-2.6.X-rc#-git#)"
-	depends on !BR2_KERNEL_ADD_LATEST
-	select BR2_KERNEL_ADD_PATCH
-
-endchoice
-
-config BR2_KERNEL_ADD_PATCH
-	bool
-
-config BR2_KERNEL_MINORLEVEL
-	string "patch level"
-	default ""
-	depends on BR2_KERNEL_ADD_MINORPATCH
-
-config BR2_KERNEL_RC_LEVEL
-	string "-rc patch level"
-	default ""
-	depends on BR2_KERNEL_ADD_RC_PATCH || BR2_KERNEL_ADD_SNAPSHOT
-
-config BR2_KERNEL_GIT_LEVEL
-	string "-git patch level"
-	default ""
-	depends on BR2_KERNEL_ADD_SNAPSHOT
-
-source "target/device/Config.in.linux.patches"
-
-config BR2_LINUX_BSP_PATCH
-	string "Additional patch to apply (from \$(DL_DIR))"
-	default ""
-	help
-	  Apply a patch located in \$(DL_DIR).
-	  You need to download or create this before
-	  enable this option
-
-config BR2_KERNEL_PATCH
-	string
-	default "patch-$(BR2_DOWNLOAD_LINUX26_VERSION).$(BR2_KERNEL_PATCH_LEVEL).bz2" if	BR2_KERNEL_ADD_LATEST_MINORPATCH
-	default "patch-$(BR2_DOWNLOAD_LINUX26_VERSION).$(BR2_KERNEL_PATCH_LEVEL).bz2" if	BR2_KERNEL_ADD_MINORPATCH
-	default "patch-$(LINUX26_LATEST_RC_VERSION).bz2" if					BR2_KERNEL_ADD_LATEST_RC_PATCH
-	default "patch-$(BR2_LINUX26_RC_VERSION).bz2" if					BR2_KERNEL_ADD_RC_PATCH
-	default "patch-$(LINUX26_LATEST_GIT_VERSION).bz2" if					BR2_KERNEL_ADD_LATEST_SNAPSHOT
-	default "patch-$(BR2_LINUX26_SNAPSHOT_VERSION).bz2" if					BR2_KERNEL_ADD_SNAPSHOT
-	default "$(BR2_CUSTOM_LINUX26_PATCH)" if						BR2_LINUX26_CUSTOM
-
-config BR2_EXTRA_VERSION
-	string
-	default ".$(BR2_KERNEL_PATCH_LEVEL)" if					BR2_KERNEL_ADD_LATEST_MINORPATCH
-	default ".$(BR2_KERNEL_PATCH_LEVEL)" if					BR2_KERNEL_ADD_MINORPATCH
-	default "$(BR2_KERNEL_RC_LEVEL)" if					BR2_KERNEL_ADD_LATEST_RC_PATCH
-	default "$(BR2_KERNEL_RC_LEVEL)" if					BR2_KERNEL_ADD_RC_PATCH
-	default "$(BR2_KERNEL_GIT_LEVEL)" if					BR2_KERNEL_ADD_LATEST_SNAPSHOT
-	default "$(BR2_KERNEL_GIT_LEVEL)" if					BR2_KERNEL_ADD_SNAPSHOT
-	default	"" if								BR2_LINUX26_CUSTOM
-endmenu
-
-# -----------------------------------------------
-
-config BR2_KERNEL_PREPATCHED
-	bool
-
-config BR2_KERNEL_BASE
-	bool
-
-config BR2_KERNEL_LATEST
-	bool
-
-config BR2_DOWNLOAD_LINUX26_VERSION
-	string
-	default "$(BR2_KERNEL_THIS_VERSION)" if					BR2_KERNEL_BASE
-	default "$(BR2_KERNEL_CURRENT_VERSION)" if				BR2_LINUX_2_6_STABLE
-	default "$(BR2_DEFAULT_KERNEL_HEADERS)" if				BR2_KERNEL_LINUX_HEADERS_VERSION
-	default  $(BR2_CUSTOM_DOWNLOAD_LINUX26_VERSION) if			BR2_LINUX26_CUSTOM
-
-config BR2_LINUX26_VERSION
-	string
-	default "$(BR2_KERNEL_THIS_VERSION).$(BR2_KERNEL_PATCH_LEVEL)" if	BR2_KERNEL_ADD_LATEST_MINORPATCH&& BR2_KERNEL_BASE
-	default "$(BR2_KERNEL_THIS_VERSION).$(BR2_KERNEL_PATCH_LEVEL)" if	BR2_KERNEL_ADD_MINORPATCH	&& BR2_KERNEL_BASE
-	default "$(LINUX26_LATEST_RC_VERSION)" if				BR2_KERNEL_ADD_LATEST_RC_PATCH
-	default "$(BR2_LINUX26_RC_VERSION)" if					BR2_KERNEL_ADD_RC_PATCH		&& BR2_KERNEL_BASE
-	default "$(LINUX26_LATEST_GIT_VERSION)" if 				BR2_KERNEL_ADD_LATEST_SNAPSHOT
-	default "$(BR2_LINUX26_SNAPSHOT_VERSION)" if				BR2_KERNEL_ADD_SNAPSHOT		&& BR2_KERNEL_BASE
-	default "$(BR2_KERNEL_THIS_VERSION)" if				      ! BR2_KERNEL_ADD_PATCH		&& BR2_KERNEL_BASE
-	default "$(BR2_KERNEL_CURRENT_VERSION)"if				BR2_LINUX_2_6_STABLE
-	default "$(BR2_CUSTOM_LINUX26_VERSION)" if				BR2_LINUX26_CUSTOM
-
-menu "Linux Kernel Configuration"
-
-choice
-	prompt "Linux Kernel Configuration"
-	depends on BR2_PACKAGE_LINUX
-	default BR2_PACKAGE_LINUX_USE_KCONFIG
-	help
-	  Select the way to configure the Linux
-
-config BR2_PACKAGE_LINUX_USE_KCONFIG
-	bool ".config file"
-	depends on BR2_PACKAGE_LINUX
-	help
-	  kernel's .config to use to build a kernel for the target.
-
-	  If the above setting is empty, you can change the default
-	  board-imposed value by passing LINUX26_KCONFIG=<path> to
-	  make.
-
-config BR2_PACKAGE_LINUX_USE_DEFCONFIG
-	bool "Run make <board>_defconfig "
-	depends on BR2_PACKAGE_LINUX
-	help
-	  Configure Linux by make <board>_defconfig
-	  You have to supply a BOARD_NAME, either by
-	  defining it in a BSP or by make BOARD_NAME=<board>
-
-config BR2_PACKAGE_LINUX_USE_XCONFIG
-	bool "Run make ARCH=$(ARCH) [xconfig|menuconfig] before build"
-	depends on BR2_PACKAGE_LINUX
-	help
-	  Configure Linux by make xconfig|menuconfig
-endchoice
-
-config BR2_PACKAGE_LINUX_KCONFIG
-	string ".config file"
-	depends on BR2_PACKAGE_LINUX_USE_KCONFIG
-	default "$(BR2_BOARD_PATH)/$(BR2_BOARD_NAME)-linux-$(BR2_LINUX26_VERSION).config"
-	help
-	  kernel's .config to use to build a kernel for the target.
-
-	  If the above setting is empty, you can change the default
-	  board-imposed value by passing LINUX26_KCONFIG=<path> to
-	  make.
-
-choice
-	prompt "Preferred config tool"
-	default BR2_MAKE_MENUCONFIG
-	depends on BR2_PACKAGE_LINUX_USE_XCONFIG
-	help
-	  Define the preferred tool to invoke if a configuration is invalid
-
-config	BR2_MAKE_XCONFIG
-	bool "make xconfig (needs QT3 headers on host)"
-	help
-	  Run "make xconfig" if kernel ".config" is invalid
-
-config	BR2_MAKE_MENUCONFIG
-	bool "make menuconfig"
-	help
-	  Run "make menuconfig" if kernel ".config" is invalid
-
-endchoice
-
-config BR2_KERNEL_CONFIG_METHOD
-	string
-	default "xconfig"	if BR2_MAKE_XCONFIG
-	default "menuconfig"	if BR2_MAKE_MENUCONFIG
-
-endmenu
-
-choice
-	prompt "kernel binary format"
-	depends on BR2_PACKAGE_LINUX
-	default BR2_LINUX_BIN_BZIMAGE if BR2_i386
-	default BR2_LINUX_BIN_BZIMAGE if BR2_x86_64
-	default BR2_LINUX_BIN_UIMAGE
-	help
-	  Select the specific Linux binary type you want to use
-
-config BR2_LINUX_BIN_BZIMAGE
-	bool "bzImage"
-	depends on BR2_PACKAGE_LINUX
-
-config BR2_LINUX_BIN_UIMAGE
-	bool "uImage"
-	depends on BR2_PACKAGE_LINUX
-
-config BR2_LINUX_BIN_VMLINUX
-	bool "vmlinux"
-	depends on BR2_PACKAGE_LINUX
-
-config BR2_LINUX_BIN_ZIMAGE
-	bool "zImage"
-	depends on BR2_PACKAGE_LINUX
-
-config BR2_LINUX_BIN_CUSTOM
-	bool "<custom> Linux binary"
-	depends on BR2_PACKAGE_LINUX
-	help
-	  Build custom Linux binary format
-
-endchoice
-
-config BR2_LINUX_BIN_CUSTOM_BIN
-	string "custom kernel binary format"
-	depends on BR2_LINUX_BIN_CUSTOM
-	default ""
-	help
-	  Which Linux binary format?
-
-config BR2_PACKAGE_LINUX_FORMAT
-	string #"kernel binary format"
-	depends on BR2_PACKAGE_LINUX
-	default "bzImage" if BR2_LINUX_BIN_BZIMAGE
-	default "uImage" if BR2_LINUX_BIN_UIMAGE
-	default "vmlinux" if BR2_LINUX_BIN_VMLINUX
-	default "zImage" if BR2_LINUX_BIN_ZIMAGE
-	default $(BR2_LINUX_BIN_CUSTOM_BIN) if BR2_LINUX_BIN_CUSTOM
-	help
-	  kernel binary format.
-	  Popular values include:
-	  - bzImage
-	  - zImage
-	  - vmlinux
-	  - zImage
-	  - xipImage
-	  and other, architecture dependant formats.
-
-	  Note that the default format is supposed to be set by your
-	  board-description, if any.
-	  i386 and compatible default to bzImage if nothing was given
-	  above.
-	  If the above setting is empty, you can change the default
-	  board-imposed value by passing LINUX26_FORMAT=<string> to
-	  make.
-
-menu "Destinations for linux kernel binaries"
-
-config BR2_LINUX_COPYTO_ROOTFS
-	bool "Copy kernel to root file system"
-	depends on BR2_PACKAGE_LINUX
-	help
-	  Copy kernel to <root>/boot directory
-
-config BR2_LINUX_COPYTO_TFTPBOOT
-	bool "Copy kernel to /tftpboot"
-	help
-	  Copy kernel to /tftpboot directory
-
-config BR2_LINUX_COPYTO
-	string "Copy kernel to <dir>..."
-	default ""
-	help
-	  Copy kernel to secondary location
-
-config BR2_LINUX_COPY_CONFIGURATION
-	bool "Copy buildroot configuration to Linux file system"
-	help
-	  The configuration files for buildroot, uclibc, busybox and linux
-	  are copied to the "<root>/boot" directory.
-
-endmenu
-endif
-
diff --git a/target/linux/Config.in.versions b/target/linux/Config.in.versions
deleted file mode 100644
index c5263a4..0000000
--- a/target/linux/Config.in.versions
+++ /dev/null
@@ -1,62 +0,0 @@
-# This file defines the latest version of
-# You also have to edit BR2_LINUX_2_6_STABLE
-# in target/linux/Config.in.advanced
-# which is approximately at line 136
-
-config LINUX26_LATEST_RC_VERSION
-	string
-	default "2.6.31-rc4" if BR2_KERNEL_ADD_LATEST_RC_PATCH
-	help
-	  Not really available as of 20090103
-
-config LINUX26_LATEST_GIT_VERSION
-	string
-	default "2.6.30-rc4-git4" if BR2_KERNEL_ADD_LATEST_SNAPSHOT
-
-config BR2_KERNEL_CURRENT_VERSION
-	string
-	default "2.6.33.4"
-	help
-	  This is the latest stable kernel (including minor version).
-
-config BR2_KERNEL_LATEST_2_6_33
-	string
-	default "4"
-	help
-	  Released 2010-May-12.
-
-config BR2_KERNEL_LATEST_2_6_32
-	string
-	default "13"
-	help
-	  Released 2010-May-12.
-
-config BR2_KERNEL_LATEST_2_6_31
-	string
-	default "13"
-	help
-	  Released 2010-Apr-01 (last .31-stable release).
-
-config BR2_KERNEL_LATEST_2_6_30
-	string
-	default "10"
-	help
-	  Released 2009-Dec-04 (last .30-stable release).
-
-config BR2_KERNEL_LATEST_2_6_29
-	string
-	default "6"
-	help
-	  Released 2009-Jul-02 (last .29-stable release).
-
-config BR2_KERNEL_LATEST_2_6_28
-	string
-	default "10"
-	help
-	  Released 2009-May-02 (last .28-stable release).
-
-config BR2_KERNEL_LATEST_2_6_27
-	string
-	default "46"
-	help
-	  Released 2010-Apr-01.
diff --git a/target/linux/Makefile.in b/target/linux/Makefile.in
deleted file mode 100644
index f019824..0000000
--- a/target/linux/Makefile.in
+++ /dev/null
@@ -1,250 +0,0 @@
-#############################################################
-#
-# Linux kernel 2.6 target
-#
-#############################################################
-ifneq ($(filter $(TARGETS),linux26),)
-
-
-ifeq ($(DOWNLOAD_LINUX26_VERSION),)
-# User did not define linux version, try using headers
-ifeq ($(LINUX_HEADERS_VERSION),)
-# We did not have headers (this is for real???)
-# Version of linux before patches
-DOWNLOAD_LINUX26_VERSION=2.6.22.1
-# Version of Linux after applying any patches
-LINUX26_VERSION=2.6.22.1
-else
-# OK, we have headers, use them...
-DOWNLOAD_LINUX26_VERSION=$(LINUX_HEADERS_VERSION)
-LINUX26_VERSION=$(LINUX_HEADERS_VERSION)
-endif
-endif
-
-LINUX26_SOURCE=linux-$(DOWNLOAD_LINUX26_VERSION).tar.bz2
-LINUX26_BZCAT:=$(BZCAT)
-LINUX26_SITE=$(BR2_KERNEL_MIRROR)/linux/kernel/v2.6
-
-ifeq ($(BOARD_PATH),)
-BOARD_PATH:=$(call qstrip,$(BR2_BOARD_PATH))
-endif
-
-# Linux kernel configuration file
-# Has to be set by the target/device
-# If it is not set by the target/device, then pick the one from .config
-ifndef LINUX26_KCONFIG
-ifneq ($(call qstrip,$(BR2_PACKAGE_LINUX_KCONFIG)),)
-LINUX26_KCONFIG=$(call qstrip,$(BR2_PACKAGE_LINUX_KCONFIG))
-else
-# LINUX26_KCONFIG=$(BOARD_PATH)/linux26.config
-endif
-endif
-
-ifndef LINUX26_FORMAT
-ifneq ($(call qstrip,$(BR2_PACKAGE_LINUX_FORMAT)),)
-LINUX26_FORMAT=$(call qstrip,$(BR2_PACKAGE_LINUX_FORMAT))
-else
-ifneq ($(filter i386 x86-64,$(KERNEL_ARCH)),)
-# zImage target no longer available on x86 since 2.6.30
-LINUX26_FORMAT=bzImage
-else
-LINUX26_FORMAT=zImage
-endif
-endif
-endif
-
-# Has to be set by the target/device
-ifndef LINUX26_BINLOC
-# default:
-ifeq ($(LINUX26_FORMAT),vmlinux)
-LINUX26_BINLOC=$(LINUX26_FORMAT)
-else
-ifeq ($(BR2_ARCH),"cris")
-LINUX26_BINLOC=arch/$(KERNEL_ARCH)/arch-v10/boot/$(LINUX26_FORMAT)
-else
-LINUX26_BINLOC=arch/$(KERNEL_ARCH)/boot/$(LINUX26_FORMAT)
-endif
-endif
-endif
-
-# File name for the Linux kernel binary
-ifndef LINUX26_KERNEL
-LINUX26_KERNEL_NAME=$(BINARIES_DIR)/$(LINUX26_FORMAT)
-endif
-
-# Version of Linux AFTER patches
-LINUX26_DIR=$(BUILD_DIR)/linux-$(LINUX26_VERSION)
-
-# for packages that need it
-LINUX_VERSION:=$(LINUX26_VERSION)
-LINUX_DIR=$(LINUX26_DIR)
-LINUX_KERNEL=$(LINUX26_KERNEL_NAME)
-
-# kernel patches
-ifeq ($(strip $(LINUX26_PATCH_DIR)),)
-ifneq ($(BOARD_PATH),)
-LINUX26_PATCH_DIR:=$(BOARD_PATH)/kernel-patches/
-endif
-endif
-LINUX26_MAKE_FLAGS = HOSTCC="$(HOSTCC)" HOSTCFLAGS="$(HOSTCFLAGS)" \
-	ARCH=$(KERNEL_ARCH) \
-	INSTALL_MOD_PATH=$(TARGET_DIR) \
-	CROSS_COMPILE=$(TARGET_CROSS) \
-	LDFLAGS="$(TARGET_LDFLAGS)" \
-	LZMA="$(LZMA)"
-
-$(LINUX26_KCONFIG):
-	@if [ ! -f "$(LINUX26_KCONFIG)" ] ; then \
-		echo ""; \
-		echo "You should create a .config for your kernel"; \
-		echo "and install it as $(LINUX26_KCONFIG)"; \
-		echo ""; \
-		sleep 5; \
-	fi
-
-ifneq ($(strip $(LINUX26_VERSION)),$(strip $(LINUX_HEADERS_VERSION)))
-$(DL_DIR)/$(LINUX26_SOURCE):
-	 $(call DOWNLOAD,$(LINUX26_SITE),$(LINUX26_SOURCE))
-endif # ($(LINUX26_VERSION),$(LINUX_HEADERS_VERSION))
-
-$(LINUX26_DIR)/.unpacked: $(DL_DIR)/$(LINUX26_SOURCE)
-	rm -rf $(LINUX26_DIR)
-	@echo "*** Unpacking kernel source"
-	$(LINUX26_BZCAT) $(DL_DIR)/$(LINUX26_SOURCE) | tar -C $(BUILD_DIR) $(TAR_OPTIONS) -
-ifneq ($(DOWNLOAD_LINUX26_VERSION),$(LINUX26_VERSION))
-	# Rename the dir from the downloaded version to the AFTER patch version
-	mv -f $(BUILD_DIR)/linux-$(DOWNLOAD_LINUX26_VERSION) $(LINUX26_DIR)
-endif
-	touch $@
-
-$(LINUX26_DIR)/.patched: $(LINUX26_DIR)/.unpacked $(LINUX_HEADERS_DEPENDS)
-	toolchain/patch-kernel.sh $(LINUX26_DIR) toolchain/kernel-headers \
-		linux-$(LINUX26_VERSION)-\*.patch{,.gz,.bz2}
-ifeq ($(BR2_KERNEL_HEADERS_RT),y)
-	toolchain/patch-kernel.sh $(LINUX26_DIR) $(DL_DIR) $(LINUX_RT_SOURCE)
-endif
-ifneq ($(KERNEL_HEADERS_PATCH_DIR),)
-	toolchain/patch-kernel.sh $(LINUX26_DIR) $(KERNEL_HEADERS_PATCH_DIR) \
-		linux-$(LINUX26_VERSION)-\*.patch{,.gz,.bz2}
-endif
-ifeq ($(BR2_PACKAGE_OPENSWAN),y)
-	toolchain/patch-kernel.sh $(LINUX26_DIR) package/openswan \
-		linux-$(LINUX26_VERSION)-\*.patch{,.gz,.bz2}
-endif
-ifneq ($(LINUX26_PATCH_DIR),)
-	if [ -d $(LINUX26_PATCH_DIR) ] ; then \
-		toolchain/patch-kernel.sh $(LINUX26_DIR) $(LINUX26_PATCH_DIR) linux-$(LINUX26_VERSION)\*.patch ; \
-	fi
-endif
-	touch $@
-
-$(LINUX26_DIR)/.configured: $(LINUX26_DIR)/.patched $(LINUX26_KCONFIG)
-	cp -dpf $(LINUX26_KCONFIG) $(LINUX26_DIR)/.config
-	$(SED) '/CONFIG_AEABI=y/d' $(LINUX26_DIR)/.config
-ifeq ($(BR2_ARM_EABI),y)
-	echo "CONFIG_AEABI=y" >> $(LINUX26_DIR)/.config
-	$(SED) '/CONFIG_OABI_COMPAT/d' $(LINUX26_DIR)/.config
-	echo "# CONFIG_OABI_COMPAT is not set" >> $(LINUX26_DIR)/.config
-else
-	echo "# CONFIG_AEABI is not set" >> $(LINUX26_DIR)/.config
-endif
-	$(SED) '/CONFIG_IPV6=y/d' $(LINUX26_DIR)/.config
-ifeq ($(BR2_INET_IPV6),y)
-	echo "CONFIG_IPV6=y" >> $(LINUX26_DIR)/.config
-else
-	echo "# CONFIG_IPV6 is not set" >> $(LINUX26_DIR)/.config
-endif
-	$(SED) '/CONFIG_INITRAMFS_SOURCE/d' $(LINUX26_DIR)/.config
-	$(SED) '/INITRAMFS_ROOT_.ID/d' $(LINUX26_DIR)/.config
-ifeq ($(BR2_TARGET_ROOTFS_INITRAMFS),y)
-	echo "CONFIG_INITRAMFS_SOURCE=\"$(BINARIES_DIR)/rootfs.initramfs\"" >> \
-		$(LINUX26_DIR)/.config
-	echo "CONFIG_INITRAMFS_ROOT_UID=0" >> $(LINUX26_DIR)/.config
-	echo "CONFIG_INITRAMFS_ROOT_GID=0" >> $(LINUX26_DIR)/.config
-else
-	echo "CONFIG_INITRAMFS_SOURCE=\"\"" >> $(LINUX26_DIR)/.config
-endif
-ifeq ($(BR2_PACKAGE_BUSYBOX_INITRAMFS),y)
-	# precedence for a small initramfs
-	$(SED) '/CONFIG_INITRAMFS_SOURCE/d' $(LINUX26_DIR)/.config
-	$(SED) '/INITRAMFS_ROOT_.ID/d' $(LINUX26_DIR)/.config
-	echo "CONFIG_INITRAMFS_SOURCE=\"$(BB_INITRAMFS_TARGET)\"" >> \
-		$(LINUX26_DIR)/.config
-	echo "CONFIG_INITRAMFS_ROOT_UID=0" >> $(LINUX26_DIR)/.config
-	echo "CONFIG_INITRAMFS_ROOT_GID=0" >> $(LINUX26_DIR)/.config
-endif
-	$(MAKE) $(LINUX26_MAKE_FLAGS) -C $(LINUX26_DIR) oldconfig
-	touch $@
-
-$(LINUX26_DIR)/.depend_done: $(LINUX26_DIR)/.configured
-	$(MAKE) $(LINUX26_MAKE_FLAGS) -C $(LINUX26_DIR) prepare
-	touch $@
-
-$(LINUX26_KERNEL_NAME): $(INITRAMFS_TARGET) $(BB_INITRAMFS_TARGET) \
-		$(LINUX26_DIR)/.depend_done
-	$(MAKE) $(LINUX26_MAKE_FLAGS) \
-		-C $(LINUX26_DIR) $(LINUX26_FORMAT)
-	cp -pf $(LINUX26_DIR)/$(LINUX26_BINLOC) $(LINUX26_KERNEL_NAME)
-	touch -c $@
-
-$(TARGET_DIR)/lib/modules/$(LINUX26_VERSION)/modules.dep: $(LINUX26_DIR)/.configured
-	rm -rf $(TARGET_DIR)/lib/modules/$(LINUX26_VERSION)
-	rm -f $(TARGET_DIR)/sbin/cardmgr
-	@if grep -q CONFIG_MODULES=y $(LINUX26_DIR)/.config; then \
-	    set -x; \
-	    echo "Have CONFIG_MODULES"; \
-	    $(MAKE) $(LINUX26_MAKE_FLAGS) -C $(LINUX26_DIR) modules; \
-	    $(MAKE) $(LINUX26_MAKE_FLAGS) -C $(LINUX26_DIR) \
-		DEPMOD=$(STAGING_DIR)/bin/$(GNU_TARGET_NAME)-depmod26 \
-		INSTALL_MOD_PATH=$(TARGET_DIR) modules_install; \
-	    rm -f $(TARGET_DIR)/lib/modules/$(LINUX26_VERSION)/build \
-		$(TARGET_DIR)/lib/modules/$(LINUX26_VERSION)/source; \
-	    $(STAGING_DIR)/bin/$(GNU_TARGET_NAME)-depmod26 -b $(TARGET_DIR) $(LINUX_HEADERS_VERSION); \
-	else \
-	    echo "No CONFIG_MODULES"; \
-	fi
-	touch -c $@
-
-linux26-menuconfig: host-sed dirs $(LINUX26_DIR)/.patched
-	if [ ! -f $(LINUX26_DIR)/.config ]; then \
-		[ -n "$(LINUX26_KCONFIG)" ] && [ -f $(LINUX26_KCONFIG) ] && \
-			cp $(LINUX26_KCONFIG) $(LINUX26_DIR)/.config || \
-			true; \
-	fi
-	$(MAKE) $(LINUX26_MAKE_FLAGS) -C $(LINUX26_DIR) menuconfig
-	-[ -f $(LINUX26_DIR)/.config ] && touch $(LINUX26_DIR)/.configured
-
-linux26-xconfig: host-sed dirs $(LINUX26_DIR)/.patched
-	[ -f $(LINUX26_DIR)/.config ] || cp $(LINUX26_KCONFIG) $(LINUX26_DIR)/.config
-	$(MAKE) $(LINUX26_MAKE_FLAGS) -C $(LINUX26_DIR) xconfig
-	-[ -f $(LINUX26_DIR)/.config ] && touch $(LINUX26_DIR)/.configured
-
-linux26: $(LINUX26_KERNEL_NAME)
-
-$(LINUX26_DIR)/.modules_installed: $(TARGET_DIR)/lib/modules/$(LINUX26_VERSION)/modules.dep
-	touch $@
-
-linux26-modules: cross-depmod26 $(LINUX26_DIR)/.modules_installed
-
-linux26-source: $(DL_DIR)/$(LINUX26_SOURCE)
-
-linux26-unpacked: $(LINUX26_DIR)/.patched
-
-linux26-config: host-sed $(LINUX26_DIR)/.configured
-
-linux26-update:
-	cp -dpf $(LINUX26_DIR)/.config $(LINUX26_KCONFIG)
-
-# force rebuild
-linux26-force:
-	touch $(LINUX26_DIR)/.configured
-
-# This has been renamed so we do _NOT_ by default run this on 'make clean'
-linux26clean:
-	rm -f $(LINUX26_KERNEL_NAME) $(LINUX26_DIR)/.configured
-	-$(MAKE) PATH=$(TARGET_PATH) -C $(LINUX26_DIR) clean
-
-linux26-dirclean:
-	rm -rf $(LINUX26_DIR)
-
-endif
diff --git a/target/linux/Makefile.in.advanced b/target/linux/Makefile.in.advanced
deleted file mode 100644
index 9cbbd2c..0000000
--- a/target/linux/Makefile.in.advanced
+++ /dev/null
@@ -1,532 +0,0 @@
-###############################################################################
-#
-# Linux kernel 2.6 target (Advanced configuration)
-#
-###############################################################################
-ifneq ($(filter $(TARGETS),linux26),)
-
-# -----------------------------------------------------------------------------
-# Make sure LINUX_HEADERS_VERSION is defined
-ifeq ($(LINUX_HEADERS_VERSION),)
-# We did not have headers (this is for real???)
-LINUX_HEADERS_VERSION:=2.6.22.1
-endif
-
-# -----------------------------------------------------------------------------
-# STRATEGY FOR DOWNLOAD_LINUX26_VERSION
-# 1. Use definition from user Makefile
-# 2. Use definition from Kconfig
-# 3. Use Linux Headers version
-# 4. Use default (2.6.22.1)
-ifeq ($(DOWNLOAD_LINUX26_VERSION),)
-ifneq ($(BR2_DOWNLOAD_LINUX26_VERSION),)
-DOWNLOAD_LINUX26_VERSION:=$(call qstrip,$(BR2_DOWNLOAD_LINUX26_VERSION))
-else
-DOWNLOAD_LINUX26_VERSION:=$(LINUX_HEADERS_VERSION)
-endif
-endif
-
-# -----------------------------------------------------------------------------
-# STRATEGY FOR LINUX26_VERSION
-# 1. Use definition from user Makefile
-# 2. Use definition from Kconfig
-# 3. Use Linux Headers version
-# 4. Use default (2.6.22.1)
-ifeq ($(LINUX26_VERSION),)
-ifneq ($(BR2_LINUX26_VERSION),)
-LINUX26_VERSION:=$(call qstrip,$(BR2_LINUX26_VERSION))
-else
-LINUX26_VERSION:=$(LINUX_HEADERS_VERSION)
-endif
-endif
-
-# Ask the kernel what version number it will use when installing modules
-LINUX26_VERSION_PROBED = `$(MAKE) $(LINUX26_MAKE_FLAGS) -C $(LINUX26_DIR) --no-print-directory -s kernelrelease`
-
-ifeq ($(BOARD_PATH),)
-BOARD_PATH:=$(call qstrip,$(BR2_BOARD_PATH))
-endif
-
-# Version of Linux AFTER patches
-LINUX26_DIR:=$(BUILD_DIR)/linux-$(LINUX26_VERSION)
-
-# for packages that need it
-LINUX_VERSION:=$(LINUX26_VERSION)
-LINUX_DIR:=$(LINUX26_DIR)
-
-# -----------------------------------------------------------------------------
-# Define source name and sites
-LINUX26_SOURCE:=linux-$(DOWNLOAD_LINUX26_VERSION).tar.bz2
-LINUX26_SITE:=$(call qstrip,$(BR2_KERNEL_SITE))
-
-LINUX26_PATCH_SOURCE:=$(call qstrip,$(BR2_KERNEL_PATCH))
-LINUX26_PATCH_SITE:=$(call qstrip,$(BR2_KERNEL_PATCH_SITE))
-
-LINUX26_BSP_PATCH:=$(call qstrip,$(BR2_LINUX_BSP_PATCH))
-
-ifneq ($(LINUX26_BSP_PATCH),)
-LINUX_HEADERS_DEPENDS:=  $(DL_DIR)/$(LINUX26_BSP_PATCH)
-endif
-
-ifneq ($(LINUX26_PATCH_SOURCE),)
-LINUX_HEADERS_DEPENDS+=$(DL_DIR)/$(LINUX26_PATCH_SOURCE)
-endif
-
-# ------------------------------------
-# kernel patches provided by buildroot
-ifeq ($(strip $(LINUX26_PATCH_DIR)),)
-LINUX26_PATCH_DIR:=$(BOARD_PATH)/kernel-patches/
-endif
-
-# kernel architecture patches provided by buildroot
-KERNEL_ARCH_PATCH_DIR:=$(call qstrip,$(BR2_KERNEL_ARCH_PATCH_DIR))
-
-
-
-
-# -----------------------------------------------------------------------------
-# Linux kernel configuration file
-# This is used if BR2_PACKAGE_LINUX_USE_KCONFIG is set
-# Has to be set by the target/device
-# If it is not set by the target/device, then pick the one from .config
-ifndef LINUX26_KCONFIG
-ifneq ($(call qstrip,$(BR2_PACKAGE_LINUX_KCONFIG)),)
-LINUX26_KCONFIG:=$(call qstrip,$(BR2_PACKAGE_LINUX_KCONFIG))
-else
-ifeq ($(BR2_i386),y)
-LINUX26_KCONFIG:=$(BOARD_PATH)/linux26.config
-else
-LINUX26_KCONFIG:=$(BOARD_PATH)/linux-$(LINUX26_VERSION).config
-endif
-endif
-endif
-
-KERNEL_CONFIG_METHOD:=$(call qstrip,$(BR2_KERNEL_CONFIG_METHOD))
-ifeq ($(KERNEL_CONFIG_METHOD),)
-KERNEL_CONFIG_METHOD:=menuconfig
-endif
-
-# -----------------------------------------------------------------------------
-ifndef LINUX26_FORMAT
-ifneq ($(call qstrip,$(BR2_PACKAGE_LINUX_FORMAT)),)
-LINUX26_FORMAT:=$(call qstrip,$(BR2_PACKAGE_LINUX_FORMAT))
-else
-ifneq ($(filter i386 x86-64,$(KERNEL_ARCH)),)
-# zImage target no longer available on x86 since 2.6.30
-LINUX26_FORMAT=bzImage
-else
-LINUX26_FORMAT:=zImage
-endif
-endif
-endif
-
-# -----------------------------------------------------------------------------
-# Has to be set by the target/device
-
-LINUX26_MKIMAGE_DEP:=
-
-# --------------
-# VMLINUX
-ifeq ($(LINUX26_FORMAT),vmlinux)
-ifeq ($(LINUX26_BINLOC),)
-LINUX26_BINLOC:=$(LINUX26_FORMAT)
-endif
-endif
-
-# --------------
-# UIMAGE
-ifeq ($(LINUX26_FORMAT),uImage)
-LINUX26_MKIMAGE_DEP:=$(MKIMAGE)
-ifeq ($(LINUX26_BINLOC),)
-LINUX26_BINLOC:=arch/$(KERNEL_ARCH)/boot/$(LINUX26_FORMAT)
-endif
-endif
-
-# --------------
-# ZIMAGE
-ifeq ($(LINUX26_FORMAT),zImage)
-ifeq ($(LINUX26_BINLOC),)
-LINUX26_BINLOC:=arch/$(KERNEL_ARCH)/boot/$(LINUX26_FORMAT)
-endif
-endif
-
-# --------------
-# BZIMAGE
-ifeq ($(LINUX26_FORMAT),bzImage)
-ifeq ($(LINUX26_BINLOC),)
-LINUX26_BINLOC:=arch/$(KERNEL_ARCH)/boot/bzImage
-endif
-endif
-
-# -----------------------------------------------------------------------------
-# File name for the Linux kernel binary
-LINUX26_KERNEL_NAME:=$(LINUX26_FORMAT)
-
-
-ifeq ($(BOARD_NAME),)
-BOARD_NAME=$(ARCH)
-endif
-
-ifndef LINUX26_KERNEL
-LINUX26_KERNEL:=$(BINARIES_DIR)/$(LINUX26_KERNEL_NAME)
-endif
-
-# for packages that need it
-LINUX_KERNEL:=$(LINUX26_KERNEL)
-
-
-# -----------------------------------------------------------------------------
-LINUX26_BZCAT:=$(BZCAT)
-
-LINUX26_MAKE_FLAGS = HOSTCC="$(HOSTCC)" HOSTCFLAGS="$(HOSTCFLAGS)" \
-	ARCH=$(KERNEL_ARCH) \
-	INSTALL_MOD_PATH=$(TARGET_DIR) \
-	CROSS_COMPILE=$(TARGET_CROSS) \
-	LDFLAGS="$(TARGET_LDFLAGS)" \
-	LZMA="$(LZMA)" \
-	PATH=$(PATH)
-
-# =============================================================================
-# ifneq ($(strip $(LINUX26_VERSION)),$(strip $(LINUX_HEADERS_VERSION)))
-
-ifneq ($(strip $(LINUX26_SOURCE)),$(strip $(LINUX_HEADERS_SOURCE)))
-$(DL_DIR)/$(LINUX26_SOURCE):
-	 $(call DOWNLOAD,$(LINUX26_SITE),$(LINUX26_SOURCE))
-endif # ($(LINUX26_VERSION),$(LINUX_HEADERS_VERSION))
-
-ifneq ($(strip $(LINUX26_PATCH_SOURCE)),)
-$(DL_DIR)/$(LINUX26_PATCH_SOURCE):
-	 $(call DOWNLOAD,$(LINUX26_PATCH_SITE),$(LINUX26_PATCH_SOURCE))
-endif
-
-$(LINUX26_DIR)/.unpacked: $(DL_DIR)/$(LINUX26_SOURCE)
-	rm -rf $(LINUX26_DIR)
-	@echo "*** Unpacking kernel source"
-	$(LINUX26_BZCAT) $(DL_DIR)/$(LINUX26_SOURCE) | tar -C $(BUILD_DIR) $(TAR_OPTIONS) -
-ifneq ($(DOWNLOAD_LINUX26_VERSION),$(LINUX26_VERSION))
-	# Rename the dir from the downloaded version to the AFTER patch version
-	mv -f $(BUILD_DIR)/linux-$(DOWNLOAD_LINUX26_VERSION) $(LINUX26_DIR)
-	echo $(LINUX26_VERSION_PROBED) > $(BUILD_DIR)/.linux-version
-endif
-	touch $@
-
-
-# -----------------------------------------------------------------------------
-LINUX26_TARGETS+=$(LINUX26_KERNEL) $(BUILD_DIR)/.linux-version
-
-ifeq ($(BR2_LINUX_COPYTO_ROOTFS),y)
-LINUX26_TARGETS+=$(TARGET_DIR)/boot/$(LINUX26_KERNEL_NAME)
-endif
-
-ifeq ($(BR2_LINUX_COPYTO_TFTPBOOT),y)
-LINUX26_TARGETS+=/tftpboot/$(LINUX26_KERNEL_NAME)
-endif
-
-ifneq ($(call qstrip,$(BR2_LINUX_COPYTO)),)
-LINUX_COPYTO:=$(call qstrip,$(BR2_LINUX_COPYTO))
-LINUX26_TARGETS+=$(LINUX_COPYTO)/$(LINUX26_KERNEL_NAME)
-endif
-
-ifneq ($(BR2_LINUX_COPY_CONFIGURATION),)
-LINUX26_TARGETS+=$(TARGET_DIR)/boot/buildroot.config
-LINUX26_TARGETS+=$(TARGET_DIR)/boot/linux-$(LINUX26_VERSION).config
-LINUX26_TARGETS+=$(TARGET_DIR)/boot/uclibc.config
-ifeq ($(BR2_PACKAGE_BUSYBOX),y)
-LINUX26_TARGETS+=$(TARGET_DIR)/boot/busybox.config
-endif
-endif
-# -----------------------------------------------------------------------------
-
-$(LINUX26_DIR)/.patched: $(LINUX26_DIR)/.unpacked $(LINUX_HEADERS_DEPENDS)
-ifneq ($(LINUX26_PATCH_SOURCE),)
-	toolchain/patch-kernel.sh $(LINUX26_DIR) $(DL_DIR) $(LINUX26_PATCH_SOURCE)
-endif
-ifneq ($(LINUX26_BSP_PATCH),)
-	toolchain/patch-kernel.sh $(LINUX26_DIR) $(DL_DIR) $(LINUX26_BSP_PATCH)
-endif
-	toolchain/patch-kernel.sh $(LINUX26_DIR) toolchain/kernel-headers \
-		linux-$(LINUX26_VERSION)-\*.patch{,.gz,.bz2}
-ifeq ($(BR2_KERNEL_HEADERS_RT),y)
-	toolchain/patch-kernel.sh $(LINUX26_DIR) $(DL_DIR) $(LINUX_RT_SOURCE)
-endif
-ifneq ($(KERNEL_HEADERS_PATCH_DIR),)
-	toolchain/patch-kernel.sh $(LINUX26_DIR) $(KERNEL_HEADERS_PATCH_DIR) \
-		linux-$(LINUX26_VERSION)\*.patch{,.gz,.bz2}
-endif
-ifeq ($(BR2_PACKAGE_OPENSWAN),y)
-	toolchain/patch-kernel.sh $(LINUX26_DIR) package/openswan \
-		linux-$(LINUX26_VERSION)\*.patch{,.gz,.bz2}
-endif
-	touch $@
-
-$(LINUX26_DIR)/.patched.arch: $(LINUX26_DIR)/.patched
-ifneq ($(BR2_KERNEL_ARCH_PATCH_DIR),)
-	if [ -d $(KERNEL_ARCH_PATCH_DIR) ] ; then \
-	toolchain/patch-kernel.sh $(LINUX26_DIR) $(KERNEL_ARCH_PATCH_DIR) \
-		linux-\*.patch{,.gz,.bz2} ; \
-	fi
-endif
-	touch $@
-
-$(LINUX26_DIR)/.patched.board: $(LINUX26_DIR)/.patched.arch $(KERNEL_COND_PATCHES)
-ifneq ($(LINUX26_PATCH_DIR),)
-	if [ -d $(LINUX26_PATCH_DIR) ] ; then \
-	toolchain/patch-kernel.sh $(LINUX26_DIR) $(LINUX26_PATCH_DIR) \
-		linux-$(LINUX26_VERSION)\*.patch{,.gz,.bz2} ; \
-	fi
-endif
-	touch $@
-
-# =============================================================================
-linux_patch: $(LINUX26_DIR)/.patched.board
-
-KERNEL_EXTRA_VERSION:=$(call qstrip,$(BR2_EXTRA_VERSION))
-
-lxcf:	$(LINUX26_DIR)/.config
-
-$(LINUX26_DIR)/.config:	$(LINUX26_DIR)/.patched.board
-ifeq ($(BR2_PACKAGE_LINUX_USE_DEFCONFIG),y)
-	$(MAKE) $(LINUX26_MAKE_FLAGS) -C $(LINUX26_DIR) $(BOARD_NAME)_defconfig
-endif
-ifeq ($(BR2_PACKAGE_LINUX_USE_XCONFIG),y)
-ifeq ($(KERNEL_CONFIG_METHOD),xconfig)
-	$(MAKE) $(LINUX26_MAKE_FLAGS) -C $(LINUX26_DIR) xconfig || \
-		$(MAKE) $(LINUX26_MAKE_FLAGS) -C $(LINUX26_DIR) menuconfig \
-else
-	$(MAKE) $(LINUX26_MAKE_FLAGS) -C $(LINUX26_DIR) menuconfig
-endif
-endif
-ifeq ($(BR2_PACKAGE_LINUX_USE_KCONFIG),y)
-	# Try user defined config
-	if [ -f "$(LINUX26_KCONFIG)" ] ; then \
-		cp -dpf $(LINUX26_KCONFIG) $@ ; \
-	fi
-	# Try to get a config for this linux version in the board directory
-	echo "LINUX26_VERSION = $(LINUX26_VERSION)"
-	if [ ! -f "$(LINUX26_DIR)/.config" ] ; then \
-	    if [ -f "$(BOARD_PATH)/$(BOARD_NAME)-linux-$(LINUX26_VERSION).config" ] ; then \
-		cp -dpf $(BOARD_PATH)/$(BOARD_NAME)-linux-$(LINUX26_VERSION).config $@ ; \
-	    fi ; \
-	fi
-	# Try to get a config for latest linux version in the board directory
-	if [ ! -f "$(LINUX26_DIR)/.config" ] ; then \
-		scripts/get_linux_config.sh $(BOARD_PATH) $(LINUX26_DIR) ; \
-	fi
-	# Use a board config defined in the linux source.
-	if [ ! -f "$(LINUX26_DIR)/.config" ] ; then \
-		$(MAKE) $(LINUX26_MAKE_FLAGS) -C $(LINUX26_DIR) $(BOARD_NAME)_defconfig || \
-			echo "$(BOARD_NAME)_defconfig failed..." ; \
-	fi
-	# let the user create his/her own config
-	if [ ! -f "$(LINUX26_DIR)/.config" ] ; then \
-		$(MAKE) $(LINUX26_MAKE_FLAGS) -C $(LINUX26_DIR) $(KERNEL_CONFIG_METHOD) ; \
-	fi
-endif
-ifneq ($(call qstrip,$(BR2_EXTRA_VERSION)),)
-	$(SED) 's,^EXTRAVERSION.*,EXTRAVERSION = $(KERNEL_EXTRA_VERSION),g' $(LINUX26_DIR)/Makefile
-endif
-# $(strip $(subst ",, - ))
-
-# -----------------------------------------------------------------------------
-$(LINUX26_DIR)/.configured: $(LINUX26_DIR)/.config
-	$(SED) '/CONFIG_AEABI=y/d' $(LINUX26_DIR)/.config
-ifeq ($(BR2_ARM_EABI),y)
-	echo "CONFIG_AEABI=y" >> $(LINUX26_DIR)/.config
-	$(SED) '/CONFIG_OABI_COMPAT/d' $(LINUX26_DIR)/.config
-	echo "# CONFIG_OABI_COMPAT is not set" >> $(LINUX26_DIR)/.config
-else
-	echo "# CONFIG_AEABI is not set" >> $(LINUX26_DIR)/.config
-endif
-	$(SED) '/CONFIG_IPV6=y/d' $(LINUX26_DIR)/.config
-ifeq ($(BR2_INET_IPV6),y)
-	echo "CONFIG_IPV6=y" >> $(LINUX26_DIR)/.config
-else
-	echo "# CONFIG_IPV6 is not set" >> $(LINUX26_DIR)/.config
-endif
-	$(SED) '/CONFIG_INITRAMFS_SOURCE/d' $(LINUX26_DIR)/.config
-	$(SED) '/INITRAMFS_ROOT_.ID/d' $(LINUX26_DIR)/.config
-ifeq ($(BR2_TARGET_ROOTFS_INITRAMFS),y)
-	echo "CONFIG_INITRAMFS_SOURCE=\"$(BINARIES_DIR)/rootfs.initramfs\"" >> \
-		$(LINUX26_DIR)/.config
-	echo "CONFIG_INITRAMFS_ROOT_UID=0" >> $(LINUX26_DIR)/.config
-	echo "CONFIG_INITRAMFS_ROOT_GID=0" >> $(LINUX26_DIR)/.config
-else
-	echo "CONFIG_INITRAMFS_SOURCE=\"\"" >> $(LINUX26_DIR)/.config
-endif
-ifeq ($(BR2_PACKAGE_BUSYBOX_INITRAMFS),y)
-	# precedence for a small initramfs
-	$(SED) '/CONFIG_INITRAMFS_SOURCE/d' $(LINUX26_DIR)/.config
-	$(SED) '/INITRAMFS_ROOT_.ID/d' $(LINUX26_DIR)/.config
-	echo "CONFIG_INITRAMFS_SOURCE=\"$(BB_INITRAMFS_TARGET)\"" >> \
-		$(LINUX26_DIR)/.config
-	echo "CONFIG_INITRAMFS_ROOT_UID=0" >> $(LINUX26_DIR)/.config
-	echo "CONFIG_INITRAMFS_ROOT_GID=0" >> $(LINUX26_DIR)/.config
-endif
-	$(MAKE) $(LINUX26_MAKE_FLAGS) -C $(LINUX26_DIR) oldconfig
-	touch $@
-
-# -----------------------------------------------------------------------------
-$(LINUX26_DIR)/.depend_done: $(LINUX26_DIR)/.configured $(LINUX26_MKIMAGE_DEP)
-	mkdir -p $(TARGET_DIR)/boot
-	-mv $(LINUX26_DIR)/localversion* $(TARGET_DIR)/boot
-	$(MAKE) $(LINUX26_MAKE_FLAGS) -C $(LINUX26_DIR) prepare
-	touch $@
-
-$(LINUX26_DIR)/$(LINUX26_BINLOC): $(INITRAMFS_TARGET) $(BB_INITRAMFS_TARGET) \
-		$(LINUX26_DIR)/.depend_done
-	$(MAKE) $(LINUX26_MAKE_FLAGS) \
-		-C $(LINUX26_DIR) $(LINUX26_FORMAT)
-	touch $@
-
-$(LINUX26_KERNEL): $(LINUX26_DIR)/$(LINUX26_BINLOC)
-	cp -pf $(LINUX26_DIR)/$(LINUX26_BINLOC) $(LINUX26_KERNEL)
-	touch $@
-
-# -----------------------------------------------------------------------------
-$(STAMP_DIR)/linux_modules_target_installed: $(LINUX26_DIR)/.depend_done
-	rm -rf $(TARGET_DIR)/lib/modules/$(LINUX26_VERSION_PROBED)
-	rm -f $(TARGET_DIR)/sbin/cardmgr
-	# Make Linux depend on modules only if enabled in the .config.
-	@if [ $(shell grep -c "CONFIG_MODULES=y" $(LINUX26_DIR)/.config) != 0 ] ; then	\
-		echo "*** Installing Linux kernel modules" ;				\
-		$(MAKE) $(LINUX26_MAKE_FLAGS) -C $(LINUX26_DIR) modules;		\
-		$(MAKE) $(LINUX26_MAKE_FLAGS) -C $(LINUX26_DIR)				\
-			DEPMOD=$(STAGING_DIR)/bin/$(GNU_TARGET_NAME)-depmod26		\
-			INSTALL_MOD_PATH=$(TARGET_DIR) modules_install;			\
-		rm -f $(TARGET_DIR)/lib/modules/$(LINUX26_VERSION_PROBED)/build;	\
-		rm -f $(TARGET_DIR)/lib/modules/$(LINUX26_VERSION_PROBED)/source;	\
-		$(STAGING_DIR)/bin/$(GNU_TARGET_NAME)-depmod26 -b $(TARGET_DIR) $(LINUX26_VERSION_PROBED); \
-	else										\
-		echo "*** Skipping installing modules since it is not enabled" ;	\
-	fi
-	touch $@
-
-linux26-menuconfig: $(LINUX26_DIR)/.patched host-sed
-	[ -f $(LINUX26_DIR)/.config ] || cp $(LINUX26_KCONFIG) $(LINUX26_DIR)/.config
-	$(MAKE) $(LINUX26_MAKE_FLAGS) -C $(LINUX26_DIR) menuconfig
-	-[ -f $(LINUX26_DIR)/.config ] && touch $(LINUX26_DIR)/.configured
-
-linux26-xconfig: $(LINUX26_DIR)/.patched host-sed
-	[ -f $(LINUX26_DIR)/.config ] || cp $(LINUX26_KCONFIG) $(LINUX26_DIR)/.config
-	$(MAKE) $(LINUX26_MAKE_FLAGS) -C $(LINUX26_DIR) xconfig
-	-[ -f $(LINUX26_DIR)/.config ] && touch $(LINUX26_DIR)/.configured
-
-$(TARGET_DIR)/boot/$(LINUX26_KERNEL_NAME): $(LINUX26_KERNEL)
-	mkdir -p $(TARGET_DIR)/boot
-	cp -dpf $(LINUX26_KERNEL) $(TARGET_DIR)/boot/$(LINUX26_KERNEL_NAME)
-
-$(TARGET_DIR)/boot/buildroot.config: .config
-	mkdir -p $(TARGET_DIR)/boot
-	cp -dpf .config $(TARGET_DIR)/boot/buildroot.config
-
-$(TARGET_DIR)/boot/linux-$(LINUX26_VERSION).config: $(LINUX26_DIR)/.config
-	mkdir -p $(TARGET_DIR)/boot
-	cp -dpf $(LINUX26_DIR)/.config $(TARGET_DIR)/boot/linux-$(LINUX26_VERSION).config
-
-$(TARGET_DIR)/boot/uclibc.config: $(UCLIBC_DIR)/.config
-	mkdir -p $(TARGET_DIR)/boot
-	cp -dpf $(UCLIBC_DIR)/.config $(TARGET_DIR)/boot/uclibc.config
-
-$(TARGET_DIR)/boot/busybox.config: $(BUSYBOX_DIR)/.config
-	mkdir -p $(TARGET_DIR)/boot
-	cp -dpf $(BUSYBOX_DIR)/.config $(TARGET_DIR)/boot/busybox.config
-
-/tftpboot/$(LINUX26_KERNEL_NAME): $(LINUX26_KERNEL)
-	-mkdir -p /tftpboot
-	-cp -dpf $(LINUX26_KERNEL) $@
-	-touch $@
-
-ifneq ($(LINUX_COPYTO),/tftpboot)
-$(LINUX_COPYTO)/$(LINUX26_KERNEL_NAME): $(LINUX26_KERNEL)
-	mkdir -p $(LINUX_COPYTO)
-	cp -dpf $(LINUX26_KERNEL) $@
-	touch $@
-endif
-
-$(BUILD_DIR)/.linux-version: $(LINUX26_KERNEL)
-	echo $(LINUX26_VERSION_PROBED) > $(BUILD_DIR)/.linux-version
-	echo LINUX_MODULES=`$(LINUX26_VERSION_PROBED)`
-
-linux26: $(LINUX26_TARGETS)
-
-linux26-version: $(BUILD_DIR)/.linux-version
-
-linux26-modules: cross-depmod26 $(STAMP_DIR)/linux_modules_target_installed
-
-linux26-source: $(DL_DIR)/$(LINUX26_SOURCE)
-
-linux26-unpacked: $(LINUX26_DIR)/.patched
-
-linux26-config: host-sed $(LINUX26_DIR)/.configured
-
-linux26-update:
-	cp -dpf $(LINUX26_DIR)/.config $(LINUX26_KCONFIG)
-
-# force rebuild
-linux26-force:
-	touch $(LINUX26_DIR)/.configured
-
-# This has been renamed so we do _NOT_ by default run this on 'make clean'
-linux26clean:
-	rm -f $(STAMP_DIR)/linux_modules_target_installed
-	rm -f $(LINUX26_KERNEL) $(LINUX26_DIR)/.configured
-	-$(MAKE) PATH=$(TARGET_PATH) -C $(LINUX26_DIR) clean
-
-linux26-dirclean:
-	rm -rf $(LINUX26_DIR)
-
-linux26-status: linux-status
-
-#	@echo =$()
-linux-status:
-	@echo BOARD_NAME=$(BOARD_NAME)
-	@echo BR2_BOARD_PATH=$(BR2_BOARD_PATH)
-	@echo BR2_CUSTOM_LINUX26_PATCH=$(BR2_CUSTOM_LINUX26_PATCH)
-	@echo BR2_CUSTOM_LINUX26_PATCH_SITE=$(BR2_CUSTOM_LINUX26_PATCH_SITE)
-	@echo BR2_DOWNLOAD_LINUX26_VERSION=$(BR2_DOWNLOAD_LINUX26_VERSION)
-	@echo BR2_LINUX_BSP_PATCH=$(BR2_LINUX_BSP_PATCH)
-	@echo BR2_LINUX_COPYTO=$(BR2_LINUX_COPYTO)
-	@echo BR2_LINUX_COPYTO_ROOTFS=$(BR2_LINUX_COPYTO_ROOTFS)
-	@echo BR2_LINUX_COPYTO_TFTPBOOT=$(BR2_LINUX_COPYTO_TFTPBOOT)
-	@echo BR2_LINUX_VERSION=$(BR2_LINUX_VERSION)
-	@echo BR2_LINUX26_CUSTOM=$(BR2_LINUX26_CUSTOM)
-	@echo BR2_LINUX26_VERSION=$(BR2_LINUX26_VERSION)
-	@echo BR2_KERNEL_ADD_LATEST_RC_PATCH=$(BR2_KERNEL_ADD_LATEST_RC_PATCH)
-	@echo BR2_KERNEL_ADD_LATEST_SNAPSHOT=$(BR2_KERNEL_ADD_LATEST_SNAPSHOT)
-	@echo BR2_KERNEL_ADD_MINORPATCH=$(BR2_KERNEL_ADD_MINORPATCH)
-	@echo BR2_KERNEL_ARCH_PATCH_DIR=$(BR2_KERNEL_ARCH_PATCH_DIR)
-	@echo BR2_KERNEL_GIT_LEVEL=$(BR2_KERNEL_GIT_LEVEL)
-	@echo BR2_KERNEL_MINORLEVEL=$(BR2_KERNEL_MINORLEVEL)
-	@echo BR2_KERNEL_PATCH=$(BR2_KERNEL_PATCH)
-	@echo BR2_KERNEL_PATCH_SITE=$(BR2_KERNEL_PATCH_SITE)
-	@echo BR2_KERNEL_RC_LEVEL=$(BR2_KERNEL_RC_LEVEL)
-	@echo BR2_KERNEL_SITE=$(BR2_KERNEL_SITE)
-	@echo BR2_PACKAGE_LINUX_KCONFIG=$(BR2_PACKAGE_LINUX_KCONFIG)
-	@echo BR2_PACKAGE_LINUX_USE_DEFCONFIG=$(BR2_PACKAGE_LINUX_USE_DEFCONFIG)
-	@echo BR2_PACKAGE_LINUX_USE_KCONFIG=$(BR2_PACKAGE_LINUX_USE_KCONFIG)
-	@echo BR2_PACKAGE_LINUX_USE_XCONFIG=$(BR2_PACKAGE_LINUX_USE_XCONFIG)
-	@echo DOWNLOAD_LINUX26_VERSION=$(DOWNLOAD_LINUX26_VERSION)
-	@echo KERNEL_ARCH_PATCH_DIR=$(KERNEL_ARCH_PATCH_DIR)
-	@echo KERNEL_COND_PATCHES=$(KERNEL_COND_PATCHES)
-	@echo KERNEL_EXT=$(KERNEL_EXT)
-	@echo KERNEL_EXTRA_VERSION=$(KERNEL_EXTRA_VERSION)
-	@echo KERNEL_HEADERS_PATCH_DIR=$(KERNEL_HEADERS_PATCH_DIR)
-	@echo LINUX_COPYTO=$(LINUX_COPYTO)
-	@echo LINUX_HEADERS_VERSION=$(LINUX_HEADERS_VERSION)
-	@echo LINUX26_BINLOC=$(LINUX26_BINLOC)
-	@echo LINUX26_DIR=$(LINUX26_DIR)
-	@echo LINUX26_FORMAT=$(LINUX26_FORMAT)
-	@echo LINUX26_HEADERS_PATCH_DIR=$(LINUX26_HEADERS_PATCH_DIR)
-	@echo LINUX26_KERNEL=$(LINUX26_KERNEL)
-	@echo LINUX26_KERNEL_NAME=$(LINUX26_KERNEL_NAME)
-	@echo LINUX26_LATEST_GIT_PATCH=$(LINUX26_LATEST_GIT_PATCH)
-	@echo LINUX26_LATEST_RC_PATCH=$(LINUX26_LATEST_RC_PATCH)
-	@echo LINUX26_PATCH_DIR=$(LINUX26_PATCH_DIR)
-	@echo LINUX26_SOURCE=$(LINUX26_SOURCE)
-	@echo LINUX26_TARGETS=$(LINUX26_TARGETS)
-	@echo LINUX26_VERSION=$(LINUX26_VERSION)
-	@echo LINUX26_MAKE_FLAGS=$(LINUX26_MAKE_FLAGS)
-	@echo BUILD_DIR=$(BUILD_DIR)
-	@echo TARGETS=$(TARGETS)
-
-endif
-- 
1.7.0.4