* [PULL 00/16] qtest and gitlab-CI improvements
@ 2021-12-15 7:33 Thomas Huth
2021-12-15 7:33 ` [PULL 01/16] qtest/libqos: add a function to initialize secondary PCI buses Thomas Huth
` (17 more replies)
0 siblings, 18 replies; 24+ messages in thread
From: Thomas Huth @ 2021-12-15 7:33 UTC (permalink / raw)
To: qemu-devel; +Cc: Richard Henderson
Hi!
The following changes since commit 76b56fdfc9fa43ec6e5986aee33f108c6c6a511e:
Merge tag 'block-pull-request' of https://gitlab.com/stefanha/qemu into staging (2021-12-14 12:46:18 -0800)
are available in the Git repository at:
https://gitlab.com/thuth/qemu.git tags/pull-request-2021-12-15
for you to fetch changes up to 7876cba8fc0cab9a4c803a30f427d4b20b95a868:
gitlab-ci: Test compilation on Windows with MSYS2 (2021-12-15 08:08:59 +0100)
----------------------------------------------------------------
* Add virtio-net failover test
* Make qtests a little bit more flexible with regards to reduced configs
* Move libssh setup from configure to meson.build
* Run device-crash-test in CI
* Add jobs for NetBSD and OpenBSD to the CI
* Test compilation with MSYS2 in the gitlab-ci, too
* Add new virtio-iommu test
----------------------------------------------------------------
Eric Auger (4):
virtio-iommu: Remove set_config callback
virtio-iommu: Fix endianness in get_config
virtio-iommu: Fix the domain_range end
tests: qtest: Add virtio-iommu test
Laurent Vivier (4):
qtest/libqos: add a function to initialize secondary PCI buses
tests/qtest: add some tests for virtio-net failover
tests/libqtest: add some virtio-net failover migration cancelling tests
tests/libqtest: add a migration test with two couples of failover devices
Thomas Huth (8):
tests/qtest: Run the PPC 32-bit tests with the 64-bit target binary, too
tests/qtest: Fence the tests that need xlnx-zcu102 with CONFIG_XLNX_ZYNQMP_ARM
tests/qtest: Add a function that gets a list with available machine types
tests/qtest: Add a function to check whether a machine is available
Move the libssh setup from configure to meson.build
gitlab-ci.d/buildtest: Add jobs that run the device-crash-test
gitlab-ci: Add cirrus-ci based tests for NetBSD and OpenBSD
gitlab-ci: Test compilation on Windows with MSYS2
.gitlab-ci.d/buildtest.yml | 23 +
.gitlab-ci.d/cirrus.yml | 35 +
.gitlab-ci.d/cirrus/kvm-build.yml | 31 +
.gitlab-ci.d/qemu-project.yml | 1 +
.gitlab-ci.d/windows.yml | 98 +++
configure | 27 -
hw/virtio/trace-events | 3 +-
hw/virtio/virtio-iommu.c | 42 +-
include/hw/pci/pci_bridge.h | 8 +
meson.build | 13 +-
meson_options.txt | 2 +
scripts/meson-buildoptions.sh | 3 +
tests/qtest/boot-serial-test.c | 3 +-
tests/qtest/cdrom-test.c | 8 +-
tests/qtest/libqos/libqtest.h | 8 +
tests/qtest/libqos/meson.build | 1 +
tests/qtest/libqos/pci.c | 119 ++++
tests/qtest/libqos/pci.h | 1 +
tests/qtest/libqos/virtio-iommu.c | 126 ++++
tests/qtest/libqos/virtio-iommu.h | 40 ++
tests/qtest/libqtest.c | 79 ++-
tests/qtest/meson.build | 9 +-
tests/qtest/prom-env-test.c | 8 +-
tests/qtest/virtio-iommu-test.c | 326 +++++++++
tests/qtest/virtio-net-failover.c | 1352 +++++++++++++++++++++++++++++++++++++
25 files changed, 2290 insertions(+), 76 deletions(-)
create mode 100644 .gitlab-ci.d/cirrus/kvm-build.yml
create mode 100644 .gitlab-ci.d/windows.yml
create mode 100644 tests/qtest/libqos/virtio-iommu.c
create mode 100644 tests/qtest/libqos/virtio-iommu.h
create mode 100644 tests/qtest/virtio-iommu-test.c
create mode 100644 tests/qtest/virtio-net-failover.c
^ permalink raw reply [flat|nested] 24+ messages in thread
* [PULL 01/16] qtest/libqos: add a function to initialize secondary PCI buses
2021-12-15 7:33 [PULL 00/16] qtest and gitlab-CI improvements Thomas Huth
@ 2021-12-15 7:33 ` Thomas Huth
2021-12-15 7:33 ` [PULL 02/16] tests/qtest: add some tests for virtio-net failover Thomas Huth
` (16 subsequent siblings)
17 siblings, 0 replies; 24+ messages in thread
From: Thomas Huth @ 2021-12-15 7:33 UTC (permalink / raw)
To: qemu-devel; +Cc: Laurent Vivier, Richard Henderson
From: Laurent Vivier <lvivier@redhat.com>
Scan the PCI devices to find bridge and set PCI_SECONDARY_BUS and
PCI_SUBORDINATE_BUS (algorithm from seabios)
Signed-off-by: Laurent Vivier <lvivier@redhat.com>
Acked-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20211208130350.10178-2-lvivier@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
---
include/hw/pci/pci_bridge.h | 8 +++
tests/qtest/libqos/pci.c | 119 ++++++++++++++++++++++++++++++++++++
tests/qtest/libqos/pci.h | 1 +
3 files changed, 128 insertions(+)
diff --git a/include/hw/pci/pci_bridge.h b/include/hw/pci/pci_bridge.h
index a94d350034..30691a6e57 100644
--- a/include/hw/pci/pci_bridge.h
+++ b/include/hw/pci/pci_bridge.h
@@ -138,6 +138,7 @@ typedef struct PCIBridgeQemuCap {
uint64_t mem_pref_64; /* Prefetchable memory to reserve (64-bit MMIO) */
} PCIBridgeQemuCap;
+#define REDHAT_PCI_CAP_TYPE_OFFSET 3
#define REDHAT_PCI_CAP_RESOURCE_RESERVE 1
/*
@@ -152,6 +153,13 @@ typedef struct PCIResReserve {
uint64_t mem_pref_64;
} PCIResReserve;
+#define REDHAT_PCI_CAP_RES_RESERVE_BUS_RES 4
+#define REDHAT_PCI_CAP_RES_RESERVE_IO 8
+#define REDHAT_PCI_CAP_RES_RESERVE_MEM 16
+#define REDHAT_PCI_CAP_RES_RESERVE_PREF_MEM_32 20
+#define REDHAT_PCI_CAP_RES_RESERVE_PREF_MEM_64 24
+#define REDHAT_PCI_CAP_RES_RESERVE_CAP_SIZE 32
+
int pci_bridge_qemu_reserve_cap_init(PCIDevice *dev, int cap_offset,
PCIResReserve res_reserve, Error **errp);
diff --git a/tests/qtest/libqos/pci.c b/tests/qtest/libqos/pci.c
index e1e96189c8..3a9076ae58 100644
--- a/tests/qtest/libqos/pci.c
+++ b/tests/qtest/libqos/pci.c
@@ -13,6 +13,8 @@
#include "qemu/osdep.h"
#include "pci.h"
+#include "hw/pci/pci.h"
+#include "hw/pci/pci_bridge.h"
#include "hw/pci/pci_regs.h"
#include "qemu/host-utils.h"
#include "qgraph.h"
@@ -99,6 +101,123 @@ void qpci_device_init(QPCIDevice *dev, QPCIBus *bus, QPCIAddress *addr)
g_assert(!addr->device_id || device_id == addr->device_id);
}
+static uint8_t qpci_find_resource_reserve_capability(QPCIDevice *dev)
+{
+ uint16_t device_id;
+ uint8_t cap = 0;
+
+ if (qpci_config_readw(dev, PCI_VENDOR_ID) != PCI_VENDOR_ID_REDHAT) {
+ return 0;
+ }
+
+ device_id = qpci_config_readw(dev, PCI_DEVICE_ID);
+
+ if (device_id != PCI_DEVICE_ID_REDHAT_PCIE_RP &&
+ device_id != PCI_DEVICE_ID_REDHAT_BRIDGE) {
+ return 0;
+ }
+
+ do {
+ cap = qpci_find_capability(dev, PCI_CAP_ID_VNDR, cap);
+ } while (cap &&
+ qpci_config_readb(dev, cap + REDHAT_PCI_CAP_TYPE_OFFSET) !=
+ REDHAT_PCI_CAP_RESOURCE_RESERVE);
+ if (cap) {
+ uint8_t cap_len = qpci_config_readb(dev, cap + PCI_CAP_FLAGS);
+ if (cap_len < REDHAT_PCI_CAP_RES_RESERVE_CAP_SIZE) {
+ return 0;
+ }
+ }
+ return cap;
+}
+
+static void qpci_secondary_buses_rec(QPCIBus *qbus, int bus, int *pci_bus)
+{
+ QPCIDevice *dev;
+ uint16_t class;
+ uint8_t pribus, secbus, subbus;
+ int index;
+
+ for (index = 0; index < 32; index++) {
+ dev = qpci_device_find(qbus, QPCI_DEVFN(bus + index, 0));
+ if (dev == NULL) {
+ continue;
+ }
+ class = qpci_config_readw(dev, PCI_CLASS_DEVICE);
+ if (class == PCI_CLASS_BRIDGE_PCI) {
+ qpci_config_writeb(dev, PCI_SECONDARY_BUS, 255);
+ qpci_config_writeb(dev, PCI_SUBORDINATE_BUS, 0);
+ }
+ g_free(dev);
+ }
+
+ for (index = 0; index < 32; index++) {
+ dev = qpci_device_find(qbus, QPCI_DEVFN(bus + index, 0));
+ if (dev == NULL) {
+ continue;
+ }
+ class = qpci_config_readw(dev, PCI_CLASS_DEVICE);
+ if (class != PCI_CLASS_BRIDGE_PCI) {
+ g_free(dev);
+ continue;
+ }
+
+ pribus = qpci_config_readb(dev, PCI_PRIMARY_BUS);
+ if (pribus != bus) {
+ qpci_config_writeb(dev, PCI_PRIMARY_BUS, bus);
+ }
+
+ secbus = qpci_config_readb(dev, PCI_SECONDARY_BUS);
+ (*pci_bus)++;
+ if (*pci_bus != secbus) {
+ secbus = *pci_bus;
+ qpci_config_writeb(dev, PCI_SECONDARY_BUS, secbus);
+ }
+
+ subbus = qpci_config_readb(dev, PCI_SUBORDINATE_BUS);
+ qpci_config_writeb(dev, PCI_SUBORDINATE_BUS, 255);
+
+ qpci_secondary_buses_rec(qbus, secbus << 5, pci_bus);
+
+ if (subbus != *pci_bus) {
+ uint8_t res_bus = *pci_bus;
+ uint8_t cap = qpci_find_resource_reserve_capability(dev);
+
+ if (cap) {
+ uint32_t tmp_res_bus;
+
+ tmp_res_bus = qpci_config_readl(dev, cap +
+ REDHAT_PCI_CAP_RES_RESERVE_BUS_RES);
+ if (tmp_res_bus != (uint32_t)-1) {
+ res_bus = tmp_res_bus & 0xFF;
+ if ((uint8_t)(res_bus + secbus) < secbus ||
+ (uint8_t)(res_bus + secbus) < res_bus) {
+ res_bus = 0;
+ }
+ if (secbus + res_bus > *pci_bus) {
+ res_bus = secbus + res_bus;
+ }
+ }
+ }
+ subbus = res_bus;
+ *pci_bus = res_bus;
+ }
+
+ qpci_config_writeb(dev, PCI_SUBORDINATE_BUS, subbus);
+ g_free(dev);
+ }
+}
+
+int qpci_secondary_buses_init(QPCIBus *bus)
+{
+ int last_bus = 0;
+
+ qpci_secondary_buses_rec(bus, 0, &last_bus);
+
+ return last_bus;
+}
+
+
void qpci_device_enable(QPCIDevice *dev)
{
uint16_t cmd;
diff --git a/tests/qtest/libqos/pci.h b/tests/qtest/libqos/pci.h
index ee64fdecbd..becb800f9e 100644
--- a/tests/qtest/libqos/pci.h
+++ b/tests/qtest/libqos/pci.h
@@ -81,6 +81,7 @@ void qpci_device_foreach(QPCIBus *bus, int vendor_id, int device_id,
void *data);
QPCIDevice *qpci_device_find(QPCIBus *bus, int devfn);
void qpci_device_init(QPCIDevice *dev, QPCIBus *bus, QPCIAddress *addr);
+int qpci_secondary_buses_init(QPCIBus *bus);
bool qpci_has_buggy_msi(QPCIDevice *dev);
bool qpci_check_buggy_msi(QPCIDevice *dev);
--
2.27.0
^ permalink raw reply related [flat|nested] 24+ messages in thread
* [PULL 02/16] tests/qtest: add some tests for virtio-net failover
2021-12-15 7:33 [PULL 00/16] qtest and gitlab-CI improvements Thomas Huth
2021-12-15 7:33 ` [PULL 01/16] qtest/libqos: add a function to initialize secondary PCI buses Thomas Huth
@ 2021-12-15 7:33 ` Thomas Huth
2021-12-15 7:33 ` [PULL 03/16] tests/libqtest: add some virtio-net failover migration cancelling tests Thomas Huth
` (15 subsequent siblings)
17 siblings, 0 replies; 24+ messages in thread
From: Thomas Huth @ 2021-12-15 7:33 UTC (permalink / raw)
To: qemu-devel; +Cc: Laurent Vivier, Richard Henderson
From: Laurent Vivier <lvivier@redhat.com>
Add test cases to test several error cases that must be
generated by invalid failover configuration.
Add a combination of coldplug and hotplug test cases to be
sure the primary is correctly managed according the
presence or not of the STANDBY feature.
Signed-off-by: Laurent Vivier <lvivier@redhat.com>
Message-Id: <20211208130350.10178-3-lvivier@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
---
tests/qtest/meson.build | 4 +
tests/qtest/virtio-net-failover.c | 788 ++++++++++++++++++++++++++++++
2 files changed, 792 insertions(+)
create mode 100644 tests/qtest/virtio-net-failover.c
diff --git a/tests/qtest/meson.build b/tests/qtest/meson.build
index c9d8458062..975a0f2f5f 100644
--- a/tests/qtest/meson.build
+++ b/tests/qtest/meson.build
@@ -68,6 +68,10 @@ qtests_i386 = \
(config_all_devices.has_key('CONFIG_RTL8139_PCI') ? ['rtl8139-test'] : []) + \
(config_all_devices.has_key('CONFIG_E1000E_PCI_EXPRESS') ? ['fuzz-e1000e-test'] : []) + \
(config_all_devices.has_key('CONFIG_ESP_PCI') ? ['am53c974-test'] : []) + \
+ (config_all_devices.has_key('CONFIG_VIRTIO_NET') and \
+ config_all_devices.has_key('CONFIG_Q35') and \
+ config_all_devices.has_key('CONFIG_VIRTIO_PCI') and \
+ slirp.found() ? ['virtio-net-failover'] : []) + \
(unpack_edk2_blobs ? ['bios-tables-test'] : []) + \
qtests_pci + \
['fdc-test',
diff --git a/tests/qtest/virtio-net-failover.c b/tests/qtest/virtio-net-failover.c
new file mode 100644
index 0000000000..fd7821deaf
--- /dev/null
+++ b/tests/qtest/virtio-net-failover.c
@@ -0,0 +1,788 @@
+/*
+ * QTest testcase for virtio-net failover
+ *
+ * See docs/system/virtio-net-failover.rst
+ *
+ * Copyright (c) 2021 Red Hat, Inc.
+ *
+ * SPDX-License-Identifier: GPL-2.0-or-later
+ */
+#include "qemu/osdep.h"
+#include "libqos/libqtest.h"
+#include "libqos/pci.h"
+#include "libqos/pci-pc.h"
+#include "qapi/qmp/qdict.h"
+#include "qapi/qmp/qlist.h"
+#include "qapi/qmp/qjson.h"
+#include "libqos/malloc-pc.h"
+#include "libqos/virtio-pci.h"
+#include "hw/pci/pci.h"
+
+#define ACPI_PCIHP_ADDR_ICH9 0x0cc0
+#define PCI_EJ_BASE 0x0008
+
+#define BASE_MACHINE "-M q35 -nodefaults " \
+ "-device pcie-root-port,id=root0,addr=0x1,bus=pcie.0,chassis=1 " \
+ "-device pcie-root-port,id=root1,addr=0x2,bus=pcie.0,chassis=2 "
+
+#define MAC_PRIMARY0 "52:54:00:11:11:11"
+#define MAC_STANDBY0 "52:54:00:22:22:22"
+
+static QGuestAllocator guest_malloc;
+static QPCIBus *pcibus;
+
+static QTestState *machine_start(const char *args, int numbus)
+{
+ QTestState *qts;
+ QPCIDevice *dev;
+ int bus;
+
+ qts = qtest_init(args);
+
+ pc_alloc_init(&guest_malloc, qts, 0);
+ pcibus = qpci_new_pc(qts, &guest_malloc);
+ g_assert(qpci_secondary_buses_init(pcibus) == numbus);
+
+ for (bus = 1; bus <= numbus; bus++) {
+ dev = qpci_device_find(pcibus, QPCI_DEVFN(bus, 0));
+ g_assert_nonnull(dev);
+
+ qpci_device_enable(dev);
+ qpci_iomap(dev, 4, NULL);
+
+ g_free(dev);
+ }
+
+ return qts;
+}
+
+static void machine_stop(QTestState *qts)
+{
+ qpci_free_pc(pcibus);
+ alloc_destroy(&guest_malloc);
+ qtest_quit(qts);
+}
+
+static void test_error_id(void)
+{
+ QTestState *qts;
+ QDict *resp;
+ QDict *err;
+
+ qts = machine_start(BASE_MACHINE
+ "-device virtio-net,bus=root0,id=standby0,failover=on",
+ 2);
+
+ resp = qtest_qmp(qts, "{'execute': 'device_add',"
+ "'arguments': {"
+ "'driver': 'virtio-net',"
+ "'bus': 'root1',"
+ "'failover_pair_id': 'standby0'"
+ "} }");
+ g_assert(qdict_haskey(resp, "error"));
+
+ err = qdict_get_qdict(resp, "error");
+ g_assert(qdict_haskey(err, "desc"));
+
+ g_assert_cmpstr(qdict_get_str(err, "desc"), ==,
+ "Device with failover_pair_id needs to have id");
+
+ qobject_unref(resp);
+
+ machine_stop(qts);
+}
+
+static void test_error_pcie(void)
+{
+ QTestState *qts;
+ QDict *resp;
+ QDict *err;
+
+ qts = machine_start(BASE_MACHINE
+ "-device virtio-net,bus=root0,id=standby0,failover=on",
+ 2);
+
+ resp = qtest_qmp(qts, "{'execute': 'device_add',"
+ "'arguments': {"
+ "'driver': 'virtio-net',"
+ "'id': 'primary0',"
+ "'bus': 'pcie.0',"
+ "'failover_pair_id': 'standby0'"
+ "} }");
+ g_assert(qdict_haskey(resp, "error"));
+
+ err = qdict_get_qdict(resp, "error");
+ g_assert(qdict_haskey(err, "desc"));
+
+ g_assert_cmpstr(qdict_get_str(err, "desc"), ==,
+ "Bus 'pcie.0' does not support hotplugging");
+
+ qobject_unref(resp);
+
+ machine_stop(qts);
+}
+
+static QDict *find_device(QDict *bus, const char *name)
+{
+ const QObject *obj;
+ QList *devices;
+ QList *list;
+
+ devices = qdict_get_qlist(bus, "devices");
+ if (devices == NULL) {
+ return NULL;
+ }
+
+ list = qlist_copy(devices);
+ while ((obj = qlist_pop(list))) {
+ QDict *device;
+
+ device = qobject_to(QDict, obj);
+
+ if (qdict_haskey(device, "pci_bridge")) {
+ QDict *bridge;
+ QDict *bridge_device;
+
+ bridge = qdict_get_qdict(device, "pci_bridge");
+
+ if (qdict_haskey(bridge, "devices")) {
+ bridge_device = find_device(bridge, name);
+ if (bridge_device) {
+ qobject_unref(device);
+ qobject_unref(list);
+ return bridge_device;
+ }
+ }
+ }
+
+ if (!qdict_haskey(device, "qdev_id")) {
+ qobject_unref(device);
+ continue;
+ }
+
+ if (strcmp(qdict_get_str(device, "qdev_id"), name) == 0) {
+ qobject_unref(list);
+ return device;
+ }
+ qobject_unref(device);
+ }
+ qobject_unref(list);
+
+ return NULL;
+}
+
+static QDict *get_bus(QTestState *qts, int num)
+{
+ QObject *obj;
+ QDict *resp;
+ QList *ret;
+
+ resp = qtest_qmp(qts, "{ 'execute': 'query-pci' }");
+ g_assert(qdict_haskey(resp, "return"));
+
+ ret = qdict_get_qlist(resp, "return");
+ g_assert_nonnull(ret);
+
+ while ((obj = qlist_pop(ret))) {
+ QDict *bus;
+
+ bus = qobject_to(QDict, obj);
+ if (!qdict_haskey(bus, "bus")) {
+ qobject_unref(bus);
+ continue;
+ }
+ if (qdict_get_int(bus, "bus") == num) {
+ qobject_unref(resp);
+ return bus;
+ }
+ qobject_ref(bus);
+ }
+ qobject_unref(resp);
+
+ return NULL;
+}
+
+static char *get_mac(QTestState *qts, const char *name)
+{
+ QDict *resp;
+ char *mac;
+
+ resp = qtest_qmp(qts, "{ 'execute': 'qom-get', "
+ "'arguments': { "
+ "'path': %s, "
+ "'property': 'mac' } }", name);
+
+ g_assert(qdict_haskey(resp, "return"));
+
+ mac = g_strdup(qdict_get_str(resp, "return"));
+
+ qobject_unref(resp);
+
+ return mac;
+}
+
+static void check_one_card(QTestState *qts, bool present,
+ const char *id, const char *mac)
+{
+ QDict *device;
+ QDict *bus;
+ char *addr;
+
+ bus = get_bus(qts, 0);
+ device = find_device(bus, id);
+ if (present) {
+ char *path;
+
+ g_assert_nonnull(device);
+ qobject_unref(device);
+
+ path = g_strdup_printf("/machine/peripheral/%s", id);
+ addr = get_mac(qts, path);
+ g_free(path);
+ g_assert_cmpstr(mac, ==, addr);
+ g_free(addr);
+ } else {
+ g_assert_null(device);
+ }
+
+ qobject_unref(bus);
+}
+
+static void test_on(void)
+{
+ QTestState *qts;
+
+ qts = machine_start(BASE_MACHINE
+ "-netdev user,id=hs0 "
+ "-device virtio-net,bus=root0,id=standby0,"
+ "failover=on,netdev=hs0,mac="MAC_STANDBY0" "
+ "-device virtio-net,bus=root1,id=primary0,"
+ "failover_pair_id=standby0,netdev=hs1,mac="MAC_PRIMARY0,
+ 2);
+
+ check_one_card(qts, true, "standby0", MAC_STANDBY0);
+ check_one_card(qts, false, "primary0", MAC_PRIMARY0);
+
+ machine_stop(qts);
+}
+
+static void test_on_mismatch(void)
+{
+ QTestState *qts;
+
+ qts = machine_start(BASE_MACHINE
+ "-netdev user,id=hs0 "
+ "-device virtio-net,bus=root0,id=standby0,"
+ "failover=on,netdev=hs0,mac="MAC_STANDBY0" "
+ "-netdev user,id=hs1 "
+ "-device virtio-net,bus=root1,id=primary0,"
+ "failover_pair_id=standby1,netdev=hs1,mac="MAC_PRIMARY0,
+ 2);
+
+ check_one_card(qts, true, "standby0", MAC_STANDBY0);
+ check_one_card(qts, true, "primary0", MAC_PRIMARY0);
+
+ machine_stop(qts);
+}
+
+static void test_off(void)
+{
+ QTestState *qts;
+
+ qts = machine_start(BASE_MACHINE
+ "-netdev user,id=hs0 "
+ "-device virtio-net,bus=root0,id=standby0,"
+ "failover=off,netdev=hs0,mac="MAC_STANDBY0" "
+ "-netdev user,id=hs1 "
+ "-device virtio-net,bus=root1,id=primary0,"
+ "failover_pair_id=standby0,netdev=hs1,mac="MAC_PRIMARY0,
+ 2);
+
+ check_one_card(qts, true, "standby0", MAC_STANDBY0);
+ check_one_card(qts, true, "primary0", MAC_PRIMARY0);
+
+ machine_stop(qts);
+}
+
+static QDict *get_failover_negociated_event(QTestState *qts)
+{
+ QDict *resp;
+ QDict *data;
+
+ resp = qtest_qmp_eventwait_ref(qts, "FAILOVER_NEGOTIATED");
+ g_assert(qdict_haskey(resp, "data"));
+
+ data = qdict_get_qdict(resp, "data");
+ g_assert(qdict_haskey(data, "device-id"));
+ qobject_ref(data);
+ qobject_unref(resp);
+
+ return data;
+}
+
+static QVirtioPCIDevice *start_virtio_net(QTestState *qts, int bus, int slot,
+ const char *id)
+{
+ QVirtioPCIDevice *dev;
+ uint64_t features;
+ QPCIAddress addr;
+ QDict *resp;
+
+ addr.devfn = QPCI_DEVFN((bus << 5) + slot, 0);
+ dev = virtio_pci_new(pcibus, &addr);
+ g_assert_nonnull(dev);
+ qvirtio_pci_device_enable(dev);
+ qvirtio_start_device(&dev->vdev);
+ features = qvirtio_get_features(&dev->vdev);
+ features = features & ~(QVIRTIO_F_BAD_FEATURE |
+ (1ull << VIRTIO_RING_F_INDIRECT_DESC) |
+ (1ull << VIRTIO_RING_F_EVENT_IDX));
+ qvirtio_set_features(&dev->vdev, features);
+ qvirtio_set_driver_ok(&dev->vdev);
+
+ resp = get_failover_negociated_event(qts);
+ g_assert_cmpstr(qdict_get_str(resp, "device-id"), ==, id);
+ qobject_unref(resp);
+
+ return dev;
+}
+
+static void test_enabled(void)
+{
+ QTestState *qts;
+ QVirtioPCIDevice *vdev;
+
+ qts = machine_start(BASE_MACHINE
+ "-netdev user,id=hs0 "
+ "-device virtio-net,bus=root0,id=standby0,"
+ "failover=on,netdev=hs0,mac="MAC_STANDBY0" "
+ "-netdev user,id=hs1 "
+ "-device virtio-net,bus=root1,id=primary0,"
+ "failover_pair_id=standby0,netdev=hs1,mac="MAC_PRIMARY0" ",
+ 2);
+
+ check_one_card(qts, true, "standby0", MAC_STANDBY0);
+ check_one_card(qts, false, "primary0", MAC_PRIMARY0);
+
+ vdev = start_virtio_net(qts, 1, 0, "standby0");
+
+ check_one_card(qts, true, "standby0", MAC_STANDBY0);
+ check_one_card(qts, true, "primary0", MAC_PRIMARY0);
+
+ qos_object_destroy((QOSGraphObject *)vdev);
+ machine_stop(qts);
+}
+
+static void test_hotplug_1(void)
+{
+ QTestState *qts;
+ QVirtioPCIDevice *vdev;
+
+ qts = machine_start(BASE_MACHINE
+ "-netdev user,id=hs0 "
+ "-device virtio-net,bus=root0,id=standby0,"
+ "failover=on,netdev=hs0,mac="MAC_STANDBY0" "
+ "-netdev user,id=hs1 ", 2);
+
+ check_one_card(qts, true, "standby0", MAC_STANDBY0);
+ check_one_card(qts, false, "primary0", MAC_PRIMARY0);
+
+ vdev = start_virtio_net(qts, 1, 0, "standby0");
+
+ check_one_card(qts, true, "standby0", MAC_STANDBY0);
+ check_one_card(qts, false, "primary0", MAC_PRIMARY0);
+
+ qtest_qmp_device_add(qts, "virtio-net", "primary0",
+ "{'bus': 'root1',"
+ "'failover_pair_id': 'standby0',"
+ "'netdev': 'hs1',"
+ "'mac': '"MAC_PRIMARY0"'}");
+
+ check_one_card(qts, true, "standby0", MAC_STANDBY0);
+ check_one_card(qts, true, "primary0", MAC_PRIMARY0);
+
+ qos_object_destroy((QOSGraphObject *)vdev);
+ machine_stop(qts);
+}
+
+static void test_hotplug_1_reverse(void)
+{
+ QTestState *qts;
+ QVirtioPCIDevice *vdev;
+
+ qts = machine_start(BASE_MACHINE
+ "-netdev user,id=hs0 "
+ "-netdev user,id=hs1 "
+ "-device virtio-net,bus=root1,id=primary0,"
+ "failover_pair_id=standby0,netdev=hs1,mac="MAC_PRIMARY0" ",
+ 2);
+
+ check_one_card(qts, false, "standby0", MAC_STANDBY0);
+ check_one_card(qts, true, "primary0", MAC_PRIMARY0);
+
+ qtest_qmp_device_add(qts, "virtio-net", "standby0",
+ "{'bus': 'root0',"
+ "'failover': 'on',"
+ "'netdev': 'hs0',"
+ "'mac': '"MAC_STANDBY0"'}");
+
+ check_one_card(qts, true, "standby0", MAC_STANDBY0);
+ check_one_card(qts, true, "primary0", MAC_PRIMARY0);
+
+ vdev = start_virtio_net(qts, 1, 0, "standby0");
+
+ check_one_card(qts, true, "standby0", MAC_STANDBY0);
+ check_one_card(qts, true, "primary0", MAC_PRIMARY0);
+
+ qos_object_destroy((QOSGraphObject *)vdev);
+ machine_stop(qts);
+}
+
+static void test_hotplug_2(void)
+{
+ QTestState *qts;
+ QVirtioPCIDevice *vdev;
+
+ qts = machine_start(BASE_MACHINE
+ "-netdev user,id=hs0 "
+ "-netdev user,id=hs1 ",
+ 2);
+
+ check_one_card(qts, false, "standby0", MAC_STANDBY0);
+ check_one_card(qts, false, "primary0", MAC_PRIMARY0);
+
+ qtest_qmp_device_add(qts, "virtio-net", "standby0",
+ "{'bus': 'root0',"
+ "'failover': 'on',"
+ "'netdev': 'hs0',"
+ "'mac': '"MAC_STANDBY0"'}");
+
+ check_one_card(qts, true, "standby0", MAC_STANDBY0);
+ check_one_card(qts, false, "primary0", MAC_PRIMARY0);
+
+ vdev = start_virtio_net(qts, 1, 0, "standby0");
+
+ check_one_card(qts, true, "standby0", MAC_STANDBY0);
+ check_one_card(qts, false, "primary0", MAC_PRIMARY0);
+
+ qtest_qmp_device_add(qts, "virtio-net", "primary0",
+ "{'bus': 'root1',"
+ "'failover_pair_id': 'standby0',"
+ "'netdev': 'hs1',"
+ "'mac': '"MAC_PRIMARY0"'}");
+
+ check_one_card(qts, true, "standby0", MAC_STANDBY0);
+ check_one_card(qts, true, "primary0", MAC_PRIMARY0);
+
+ qos_object_destroy((QOSGraphObject *)vdev);
+ machine_stop(qts);
+}
+
+static void test_hotplug_2_reverse(void)
+{
+ QTestState *qts;
+ QVirtioPCIDevice *vdev;
+
+ qts = machine_start(BASE_MACHINE
+ "-netdev user,id=hs0 "
+ "-netdev user,id=hs1 ",
+ 2);
+
+ check_one_card(qts, false, "standby0", MAC_STANDBY0);
+ check_one_card(qts, false, "primary0", MAC_PRIMARY0);
+
+ qtest_qmp_device_add(qts, "virtio-net", "primary0",
+ "{'bus': 'root1',"
+ "'failover_pair_id': 'standby0',"
+ "'netdev': 'hs1',"
+ "'mac': '"MAC_PRIMARY0"'}");
+
+ check_one_card(qts, false, "standby0", MAC_STANDBY0);
+ check_one_card(qts, true, "primary0", MAC_PRIMARY0);
+
+ qtest_qmp_device_add(qts, "virtio-net", "standby0",
+ "{'bus': 'root0',"
+ "'failover': 'on',"
+ "'netdev': 'hs0',"
+ "'rombar': 0,"
+ "'romfile': '',"
+ "'mac': '"MAC_STANDBY0"'}");
+
+ /*
+ * XXX: sounds like a bug:
+ * The primary should be hidden until the virtio-net driver
+ * negotiates the VIRTIO_NET_F_STANDBY feature by start_virtio_net()
+ */
+ check_one_card(qts, true, "standby0", MAC_STANDBY0);
+ check_one_card(qts, true, "primary0", MAC_PRIMARY0);
+
+ vdev = start_virtio_net(qts, 1, 0, "standby0");
+
+ check_one_card(qts, true, "standby0", MAC_STANDBY0);
+ check_one_card(qts, true, "primary0", MAC_PRIMARY0);
+
+ qos_object_destroy((QOSGraphObject *)vdev);
+ machine_stop(qts);
+}
+
+static QDict *migrate_status(QTestState *qts)
+{
+ QDict *resp, *ret;
+
+ resp = qtest_qmp(qts, "{ 'execute': 'query-migrate' }");
+ g_assert(qdict_haskey(resp, "return"));
+
+ ret = qdict_get_qdict(resp, "return");
+ g_assert(qdict_haskey(ret, "status"));
+ qobject_ref(ret);
+ qobject_unref(resp);
+
+ return ret;
+}
+
+static QDict *get_unplug_primary_event(QTestState *qts)
+{
+ QDict *resp;
+ QDict *data;
+
+ resp = qtest_qmp_eventwait_ref(qts, "UNPLUG_PRIMARY");
+ g_assert(qdict_haskey(resp, "data"));
+
+ data = qdict_get_qdict(resp, "data");
+ g_assert(qdict_haskey(data, "device-id"));
+ qobject_ref(data);
+ qobject_unref(resp);
+
+ return data;
+}
+
+static void test_migrate_out(gconstpointer opaque)
+{
+ QTestState *qts;
+ QDict *resp, *args, *ret;
+ g_autofree gchar *uri = g_strdup_printf("exec: cat > %s", (gchar *)opaque);
+ const gchar *status;
+ QVirtioPCIDevice *vdev;
+
+ qts = machine_start(BASE_MACHINE
+ "-netdev user,id=hs0 "
+ "-netdev user,id=hs1 ",
+ 2);
+
+ check_one_card(qts, false, "standby0", MAC_STANDBY0);
+ check_one_card(qts, false, "primary0", MAC_PRIMARY0);
+
+ qtest_qmp_device_add(qts, "virtio-net", "standby0",
+ "{'bus': 'root0',"
+ "'failover': 'on',"
+ "'netdev': 'hs0',"
+ "'mac': '"MAC_STANDBY0"'}");
+
+ check_one_card(qts, true, "standby0", MAC_STANDBY0);
+ check_one_card(qts, false, "primary0", MAC_PRIMARY0);
+
+ vdev = start_virtio_net(qts, 1, 0, "standby0");
+
+ check_one_card(qts, true, "standby0", MAC_STANDBY0);
+ check_one_card(qts, false, "primary0", MAC_PRIMARY0);
+
+ qtest_qmp_device_add(qts, "virtio-net", "primary0",
+ "{'bus': 'root1',"
+ "'failover_pair_id': 'standby0',"
+ "'netdev': 'hs1',"
+ "'rombar': 0,"
+ "'romfile': '',"
+ "'mac': '"MAC_PRIMARY0"'}");
+
+ check_one_card(qts, true, "standby0", MAC_STANDBY0);
+ check_one_card(qts, true, "primary0", MAC_PRIMARY0);
+
+ args = qdict_from_jsonf_nofail("{}");
+ g_assert_nonnull(args);
+ qdict_put_str(args, "uri", uri);
+
+ resp = qtest_qmp(qts, "{ 'execute': 'migrate', 'arguments': %p}", args);
+ g_assert(qdict_haskey(resp, "return"));
+ qobject_unref(resp);
+
+ /* the event is sent when QEMU asks the OS to unplug the card */
+ resp = get_unplug_primary_event(qts);
+ g_assert_cmpstr(qdict_get_str(resp, "device-id"), ==, "primary0");
+ qobject_unref(resp);
+
+ /* wait the end of the migration setup phase */
+ while (true) {
+ ret = migrate_status(qts);
+
+ status = qdict_get_str(ret, "status");
+ if (strcmp(status, "wait-unplug") == 0) {
+ qobject_unref(ret);
+ break;
+ }
+
+ /* The migration must not start if the card is not ejected */
+ g_assert_cmpstr(status, !=, "active");
+ g_assert_cmpstr(status, !=, "completed");
+ g_assert_cmpstr(status, !=, "failed");
+ g_assert_cmpstr(status, !=, "cancelling");
+ g_assert_cmpstr(status, !=, "cancelled");
+
+ qobject_unref(ret);
+ }
+
+ if (g_test_slow()) {
+ /* check we stay in wait-unplug while the card is not ejected */
+ for (int i = 0; i < 5; i++) {
+ sleep(1);
+ ret = migrate_status(qts);
+ status = qdict_get_str(ret, "status");
+ g_assert_cmpstr(status, ==, "wait-unplug");
+ qobject_unref(ret);
+ }
+ }
+
+ /* OS unplugs the cards, QEMU can move from wait-unplug state */
+ qtest_outl(qts, ACPI_PCIHP_ADDR_ICH9 + PCI_EJ_BASE, 1);
+
+ while (true) {
+ ret = migrate_status(qts);
+
+ status = qdict_get_str(ret, "status");
+ if (strcmp(status, "completed") == 0) {
+ qobject_unref(ret);
+ break;
+ }
+ g_assert_cmpstr(status, !=, "failed");
+ g_assert_cmpstr(status, !=, "cancelling");
+ g_assert_cmpstr(status, !=, "cancelled");
+ qobject_unref(ret);
+ }
+
+ qtest_qmp_eventwait(qts, "STOP");
+
+ /*
+ * in fact, the card is ejected from the point of view of kernel
+ * but not really from QEMU to be able to hotplug it back if
+ * migration fails. So we can't check that:
+ * check_one_card(qts, true, "standby0", MAC_STANDBY0);
+ * check_one_card(qts, false, "primary0", MAC_PRIMARY0);
+ */
+
+ qos_object_destroy((QOSGraphObject *)vdev);
+ machine_stop(qts);
+}
+
+static QDict *get_migration_event(QTestState *qts)
+{
+ QDict *resp;
+ QDict *data;
+
+ resp = qtest_qmp_eventwait_ref(qts, "MIGRATION");
+ g_assert(qdict_haskey(resp, "data"));
+
+ data = qdict_get_qdict(resp, "data");
+ g_assert(qdict_haskey(data, "status"));
+ qobject_ref(data);
+ qobject_unref(resp);
+
+ return data;
+}
+
+static void test_migrate_in(gconstpointer opaque)
+{
+ QTestState *qts;
+ QDict *resp, *args, *ret;
+ g_autofree gchar *uri = g_strdup_printf("exec: cat %s", (gchar *)opaque);
+
+ qts = machine_start(BASE_MACHINE
+ "-netdev user,id=hs0 "
+ "-netdev user,id=hs1 "
+ "-incoming defer ",
+ 2);
+
+ check_one_card(qts, false, "standby0", MAC_STANDBY0);
+ check_one_card(qts, false, "primary0", MAC_PRIMARY0);
+
+ qtest_qmp_device_add(qts, "virtio-net", "standby0",
+ "{'bus': 'root0',"
+ "'failover': 'on',"
+ "'netdev': 'hs0',"
+ "'mac': '"MAC_STANDBY0"'}");
+
+ check_one_card(qts, true, "standby0", MAC_STANDBY0);
+ check_one_card(qts, false, "primary0", MAC_PRIMARY0);
+
+ qtest_qmp_device_add(qts, "virtio-net", "primary0",
+ "{'bus': 'root1',"
+ "'failover_pair_id': 'standby0',"
+ "'netdev': 'hs1',"
+ "'rombar': 0,"
+ "'romfile': '',"
+ "'mac': '"MAC_PRIMARY0"'}");
+
+ check_one_card(qts, true, "standby0", MAC_STANDBY0);
+ check_one_card(qts, false, "primary0", MAC_PRIMARY0);
+
+ args = qdict_from_jsonf_nofail("{}");
+ g_assert_nonnull(args);
+ qdict_put_str(args, "uri", uri);
+
+ resp = qtest_qmp(qts, "{ 'execute': 'migrate-incoming', 'arguments': %p}",
+ args);
+ g_assert(qdict_haskey(resp, "return"));
+ qobject_unref(resp);
+
+ resp = get_migration_event(qts);
+ g_assert_cmpstr(qdict_get_str(resp, "status"), ==, "setup");
+ qobject_unref(resp);
+
+ resp = get_failover_negociated_event(qts);
+ g_assert_cmpstr(qdict_get_str(resp, "device-id"), ==, "standby0");
+ qobject_unref(resp);
+
+ check_one_card(qts, true, "standby0", MAC_STANDBY0);
+ check_one_card(qts, true, "primary0", MAC_PRIMARY0);
+
+ qtest_qmp_eventwait(qts, "RESUME");
+
+ ret = migrate_status(qts);
+ g_assert_cmpstr(qdict_get_str(ret, "status"), ==, "completed");
+ qobject_unref(ret);
+
+ machine_stop(qts);
+}
+
+int main(int argc, char **argv)
+{
+ const gchar *tmpdir = g_get_tmp_dir();
+ gchar *tmpfile = g_strdup_printf("%s/failover_test_migrate-%u-%u",
+ tmpdir, getpid(), g_test_rand_int());
+ int ret;
+
+ g_test_init(&argc, &argv, NULL);
+
+ qtest_add_func("failover-virtio-net/params/error/id", test_error_id);
+ qtest_add_func("failover-virtio-net/params/error/pcie", test_error_pcie);
+ qtest_add_func("failover-virtio-net/params/on", test_on);
+ qtest_add_func("failover-virtio-net/params/on_mismatch",
+ test_on_mismatch);
+ qtest_add_func("failover-virtio-net/params/off", test_off);
+ qtest_add_func("failover-virtio-net/params/enabled", test_enabled);
+ qtest_add_func("failover-virtio-net/hotplug_1", test_hotplug_1);
+ qtest_add_func("failover-virtio-net/hotplug_1_reverse",
+ test_hotplug_1_reverse);
+ qtest_add_func("failover-virtio-net/hotplug_2", test_hotplug_2);
+ qtest_add_func("failover-virtio-net/hotplug_2_reverse",
+ test_hotplug_2_reverse);
+ qtest_add_data_func("failover-virtio-net/migrate/out", tmpfile,
+ test_migrate_out);
+ qtest_add_data_func("failover-virtio-net/migrate/in", tmpfile,
+ test_migrate_in);
+
+ ret = g_test_run();
+
+ unlink(tmpfile);
+ g_free(tmpfile);
+
+ return ret;
+}
--
2.27.0
^ permalink raw reply related [flat|nested] 24+ messages in thread
* [PULL 03/16] tests/libqtest: add some virtio-net failover migration cancelling tests
2021-12-15 7:33 [PULL 00/16] qtest and gitlab-CI improvements Thomas Huth
2021-12-15 7:33 ` [PULL 01/16] qtest/libqos: add a function to initialize secondary PCI buses Thomas Huth
2021-12-15 7:33 ` [PULL 02/16] tests/qtest: add some tests for virtio-net failover Thomas Huth
@ 2021-12-15 7:33 ` Thomas Huth
2021-12-15 7:33 ` [PULL 04/16] tests/libqtest: add a migration test with two couples of failover devices Thomas Huth
` (14 subsequent siblings)
17 siblings, 0 replies; 24+ messages in thread
From: Thomas Huth @ 2021-12-15 7:33 UTC (permalink / raw)
To: qemu-devel; +Cc: Laurent Vivier, Richard Henderson
From: Laurent Vivier <lvivier@redhat.com>
Add some tests to check the state of the machine if the migration
is cancelled while we are using virtio-net failover.
Signed-off-by: Laurent Vivier <lvivier@redhat.com>
Acked-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20211208130350.10178-4-lvivier@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
---
tests/qtest/virtio-net-failover.c | 282 ++++++++++++++++++++++++++++++
1 file changed, 282 insertions(+)
diff --git a/tests/qtest/virtio-net-failover.c b/tests/qtest/virtio-net-failover.c
index fd7821deaf..e998a546b0 100644
--- a/tests/qtest/virtio-net-failover.c
+++ b/tests/qtest/virtio-net-failover.c
@@ -752,6 +752,280 @@ static void test_migrate_in(gconstpointer opaque)
machine_stop(qts);
}
+static void test_migrate_abort_wait_unplug(gconstpointer opaque)
+{
+ QTestState *qts;
+ QDict *resp, *args, *ret;
+ g_autofree gchar *uri = g_strdup_printf("exec: cat > %s", (gchar *)opaque);
+ const gchar *status;
+ QVirtioPCIDevice *vdev;
+
+ qts = machine_start(BASE_MACHINE
+ "-netdev user,id=hs0 "
+ "-netdev user,id=hs1 ",
+ 2);
+
+ check_one_card(qts, false, "standby0", MAC_STANDBY0);
+ check_one_card(qts, false, "primary0", MAC_PRIMARY0);
+
+ qtest_qmp_device_add(qts, "virtio-net", "standby0",
+ "{'bus': 'root0',"
+ "'failover': 'on',"
+ "'netdev': 'hs0',"
+ "'mac': '"MAC_STANDBY0"'}");
+
+ check_one_card(qts, true, "standby0", MAC_STANDBY0);
+ check_one_card(qts, false, "primary0", MAC_PRIMARY0);
+
+ vdev = start_virtio_net(qts, 1, 0, "standby0");
+
+ check_one_card(qts, true, "standby0", MAC_STANDBY0);
+ check_one_card(qts, false, "primary0", MAC_PRIMARY0);
+
+ qtest_qmp_device_add(qts, "virtio-net", "primary0",
+ "{'bus': 'root1',"
+ "'failover_pair_id': 'standby0',"
+ "'netdev': 'hs1',"
+ "'rombar': 0,"
+ "'romfile': '',"
+ "'mac': '"MAC_PRIMARY0"'}");
+
+ check_one_card(qts, true, "standby0", MAC_STANDBY0);
+ check_one_card(qts, true, "primary0", MAC_PRIMARY0);
+
+ args = qdict_from_jsonf_nofail("{}");
+ g_assert_nonnull(args);
+ qdict_put_str(args, "uri", uri);
+
+ resp = qtest_qmp(qts, "{ 'execute': 'migrate', 'arguments': %p}", args);
+ g_assert(qdict_haskey(resp, "return"));
+ qobject_unref(resp);
+
+ /* the event is sent when QEMU asks the OS to unplug the card */
+ resp = get_unplug_primary_event(qts);
+ g_assert_cmpstr(qdict_get_str(resp, "device-id"), ==, "primary0");
+ qobject_unref(resp);
+
+ resp = qtest_qmp(qts, "{ 'execute': 'migrate_cancel' }");
+ g_assert(qdict_haskey(resp, "return"));
+ qobject_unref(resp);
+
+ /* migration has been cancelled while the unplug was in progress */
+
+ /* while the card is not ejected, we must be in "cancelling" state */
+ ret = migrate_status(qts);
+
+ status = qdict_get_str(ret, "status");
+ g_assert_cmpstr(status, ==, "cancelling");
+ qobject_unref(ret);
+
+ /* OS unplugs the cards, QEMU can move from wait-unplug state */
+ qtest_outl(qts, ACPI_PCIHP_ADDR_ICH9 + PCI_EJ_BASE, 1);
+
+ while (true) {
+ ret = migrate_status(qts);
+
+ status = qdict_get_str(ret, "status");
+ if (strcmp(status, "cancelled") == 0) {
+ qobject_unref(ret);
+ break;
+ }
+ g_assert_cmpstr(status, !=, "failed");
+ g_assert_cmpstr(status, !=, "active");
+ qobject_unref(ret);
+ }
+
+ check_one_card(qts, true, "standby0", MAC_STANDBY0);
+ check_one_card(qts, true, "primary0", MAC_PRIMARY0);
+
+ qos_object_destroy((QOSGraphObject *)vdev);
+ machine_stop(qts);
+}
+
+static void test_migrate_abort_active(gconstpointer opaque)
+{
+ QTestState *qts;
+ QDict *resp, *args, *ret;
+ g_autofree gchar *uri = g_strdup_printf("exec: cat > %s", (gchar *)opaque);
+ const gchar *status;
+ QVirtioPCIDevice *vdev;
+
+ qts = machine_start(BASE_MACHINE
+ "-netdev user,id=hs0 "
+ "-netdev user,id=hs1 ",
+ 2);
+
+ check_one_card(qts, false, "standby0", MAC_STANDBY0);
+ check_one_card(qts, false, "primary0", MAC_PRIMARY0);
+
+ qtest_qmp_device_add(qts, "virtio-net", "standby0",
+ "{'bus': 'root0',"
+ "'failover': 'on',"
+ "'netdev': 'hs0',"
+ "'mac': '"MAC_STANDBY0"'}");
+
+ check_one_card(qts, true, "standby0", MAC_STANDBY0);
+ check_one_card(qts, false, "primary0", MAC_PRIMARY0);
+
+ vdev = start_virtio_net(qts, 1, 0, "standby0");
+
+ check_one_card(qts, true, "standby0", MAC_STANDBY0);
+ check_one_card(qts, false, "primary0", MAC_PRIMARY0);
+
+ qtest_qmp_device_add(qts, "virtio-net", "primary0",
+ "{'bus': 'root1',"
+ "'failover_pair_id': 'standby0',"
+ "'netdev': 'hs1',"
+ "'rombar': 0,"
+ "'romfile': '',"
+ "'mac': '"MAC_PRIMARY0"'}");
+
+ check_one_card(qts, true, "standby0", MAC_STANDBY0);
+ check_one_card(qts, true, "primary0", MAC_PRIMARY0);
+
+ args = qdict_from_jsonf_nofail("{}");
+ g_assert_nonnull(args);
+ qdict_put_str(args, "uri", uri);
+
+ resp = qtest_qmp(qts, "{ 'execute': 'migrate', 'arguments': %p}", args);
+ g_assert(qdict_haskey(resp, "return"));
+ qobject_unref(resp);
+
+ /* the event is sent when QEMU asks the OS to unplug the card */
+ resp = get_unplug_primary_event(qts);
+ g_assert_cmpstr(qdict_get_str(resp, "device-id"), ==, "primary0");
+ qobject_unref(resp);
+
+ /* OS unplugs the cards, QEMU can move from wait-unplug state */
+ qtest_outl(qts, ACPI_PCIHP_ADDR_ICH9 + PCI_EJ_BASE, 1);
+
+ while (true) {
+ ret = migrate_status(qts);
+
+ status = qdict_get_str(ret, "status");
+ if (strcmp(status, "wait-unplug") != 0) {
+ qobject_unref(ret);
+ break;
+ }
+ g_assert_cmpstr(status, !=, "failed");
+ qobject_unref(ret);
+ }
+
+ resp = qtest_qmp(qts, "{ 'execute': 'migrate_cancel' }");
+ g_assert(qdict_haskey(resp, "return"));
+ qobject_unref(resp);
+
+ while (true) {
+ ret = migrate_status(qts);
+
+ status = qdict_get_str(ret, "status");
+ if (strcmp(status, "cancelled") == 0) {
+ qobject_unref(ret);
+ break;
+ }
+ g_assert_cmpstr(status, !=, "failed");
+ g_assert_cmpstr(status, !=, "active");
+ qobject_unref(ret);
+ }
+
+ check_one_card(qts, true, "standby0", MAC_STANDBY0);
+ check_one_card(qts, true, "primary0", MAC_PRIMARY0);
+
+ qos_object_destroy((QOSGraphObject *)vdev);
+ machine_stop(qts);
+}
+
+static void test_migrate_abort_timeout(gconstpointer opaque)
+{
+ QTestState *qts;
+ QDict *resp, *args, *ret;
+ g_autofree gchar *uri = g_strdup_printf("exec: cat > %s", (gchar *)opaque);
+ const gchar *status;
+ int total;
+ QVirtioPCIDevice *vdev;
+
+ qts = machine_start(BASE_MACHINE
+ "-netdev user,id=hs0 "
+ "-netdev user,id=hs1 ",
+ 2);
+
+ check_one_card(qts, false, "standby0", MAC_STANDBY0);
+ check_one_card(qts, false, "primary0", MAC_PRIMARY0);
+
+ qtest_qmp_device_add(qts, "virtio-net", "standby0",
+ "{'bus': 'root0',"
+ "'failover': 'on',"
+ "'netdev': 'hs0',"
+ "'mac': '"MAC_STANDBY0"'}");
+
+ check_one_card(qts, true, "standby0", MAC_STANDBY0);
+ check_one_card(qts, false, "primary0", MAC_PRIMARY0);
+
+ vdev = start_virtio_net(qts, 1, 0, "standby0");
+
+ check_one_card(qts, true, "standby0", MAC_STANDBY0);
+ check_one_card(qts, false, "primary0", MAC_PRIMARY0);
+
+ qtest_qmp_device_add(qts, "virtio-net", "primary0",
+ "{'bus': 'root1',"
+ "'failover_pair_id': 'standby0',"
+ "'netdev': 'hs1',"
+ "'rombar': 0,"
+ "'romfile': '',"
+ "'mac': '"MAC_PRIMARY0"'}");
+
+ check_one_card(qts, true, "standby0", MAC_STANDBY0);
+ check_one_card(qts, true, "primary0", MAC_PRIMARY0);
+
+ args = qdict_from_jsonf_nofail("{}");
+ g_assert_nonnull(args);
+ qdict_put_str(args, "uri", uri);
+
+ resp = qtest_qmp(qts, "{ 'execute': 'migrate', 'arguments': %p}", args);
+ g_assert(qdict_haskey(resp, "return"));
+ qobject_unref(resp);
+
+ /* the event is sent when QEMU asks the OS to unplug the card */
+ resp = get_unplug_primary_event(qts);
+ g_assert_cmpstr(qdict_get_str(resp, "device-id"), ==, "primary0");
+ qobject_unref(resp);
+
+ resp = qtest_qmp(qts, "{ 'execute': 'migrate_cancel' }");
+ g_assert(qdict_haskey(resp, "return"));
+ qobject_unref(resp);
+
+ /* migration has been cancelled while the unplug was in progress */
+
+ /* while the card is not ejected, we must be in "cancelling" state */
+
+ total = 0;
+ while (true) {
+ ret = migrate_status(qts);
+
+ status = qdict_get_str(ret, "status");
+ if (strcmp(status, "cancelled") == 0) {
+ qobject_unref(ret);
+ break;
+ }
+ g_assert_cmpstr(status, ==, "cancelling");
+ g_assert(qdict_haskey(ret, "total-time"));
+ total = qdict_get_int(ret, "total-time");
+ qobject_unref(ret);
+ }
+
+ /*
+ * migration timeout in this case is 30 seconds
+ * check we exit on the timeout (ms)
+ */
+ g_assert_cmpint(total, >, 30000);
+
+ check_one_card(qts, true, "standby0", MAC_STANDBY0);
+ check_one_card(qts, true, "primary0", MAC_PRIMARY0);
+
+ qos_object_destroy((QOSGraphObject *)vdev);
+ machine_stop(qts);
+}
+
int main(int argc, char **argv)
{
const gchar *tmpdir = g_get_tmp_dir();
@@ -778,6 +1052,14 @@ int main(int argc, char **argv)
test_migrate_out);
qtest_add_data_func("failover-virtio-net/migrate/in", tmpfile,
test_migrate_in);
+ qtest_add_data_func("failover-virtio-net/migrate/abort/wait-unplug",
+ tmpfile, test_migrate_abort_wait_unplug);
+ qtest_add_data_func("failover-virtio-net/migrate/abort/active", tmpfile,
+ test_migrate_abort_active);
+ if (g_test_slow()) {
+ qtest_add_data_func("failover-virtio-net/migrate/abort/timeout",
+ tmpfile, test_migrate_abort_timeout);
+ }
ret = g_test_run();
--
2.27.0
^ permalink raw reply related [flat|nested] 24+ messages in thread
* [PULL 04/16] tests/libqtest: add a migration test with two couples of failover devices
2021-12-15 7:33 [PULL 00/16] qtest and gitlab-CI improvements Thomas Huth
` (2 preceding siblings ...)
2021-12-15 7:33 ` [PULL 03/16] tests/libqtest: add some virtio-net failover migration cancelling tests Thomas Huth
@ 2021-12-15 7:33 ` Thomas Huth
2021-12-15 7:33 ` [PULL 05/16] tests/qtest: Run the PPC 32-bit tests with the 64-bit target binary, too Thomas Huth
` (13 subsequent siblings)
17 siblings, 0 replies; 24+ messages in thread
From: Thomas Huth @ 2021-12-15 7:33 UTC (permalink / raw)
To: qemu-devel; +Cc: Laurent Vivier, Richard Henderson
From: Laurent Vivier <lvivier@redhat.com>
Signed-off-by: Laurent Vivier <lvivier@redhat.com>
Acked-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20211208130350.10178-5-lvivier@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
---
tests/qtest/virtio-net-failover.c | 282 ++++++++++++++++++++++++++++++
1 file changed, 282 insertions(+)
diff --git a/tests/qtest/virtio-net-failover.c b/tests/qtest/virtio-net-failover.c
index e998a546b0..4b2ba8a106 100644
--- a/tests/qtest/virtio-net-failover.c
+++ b/tests/qtest/virtio-net-failover.c
@@ -20,6 +20,7 @@
#define ACPI_PCIHP_ADDR_ICH9 0x0cc0
#define PCI_EJ_BASE 0x0008
+#define PCI_SEL_BASE 0x0010
#define BASE_MACHINE "-M q35 -nodefaults " \
"-device pcie-root-port,id=root0,addr=0x1,bus=pcie.0,chassis=1 " \
@@ -27,6 +28,8 @@
#define MAC_PRIMARY0 "52:54:00:11:11:11"
#define MAC_STANDBY0 "52:54:00:22:22:22"
+#define MAC_PRIMARY1 "52:54:00:33:33:33"
+#define MAC_STANDBY1 "52:54:00:44:44:44"
static QGuestAllocator guest_malloc;
static QPCIBus *pcibus;
@@ -1026,6 +1029,281 @@ static void test_migrate_abort_timeout(gconstpointer opaque)
machine_stop(qts);
}
+static void test_multi_out(gconstpointer opaque)
+{
+ QTestState *qts;
+ QDict *resp, *args, *ret;
+ g_autofree gchar *uri = g_strdup_printf("exec: cat > %s", (gchar *)opaque);
+ const gchar *status, *expected;
+ QVirtioPCIDevice *vdev0, *vdev1;
+
+ qts = machine_start(BASE_MACHINE
+ "-device pcie-root-port,id=root2,addr=0x3,bus=pcie.0,chassis=3 "
+ "-device pcie-root-port,id=root3,addr=0x4,bus=pcie.0,chassis=4 "
+ "-netdev user,id=hs0 "
+ "-netdev user,id=hs1 "
+ "-netdev user,id=hs2 "
+ "-netdev user,id=hs3 ",
+ 4);
+
+ check_one_card(qts, false, "standby0", MAC_STANDBY0);
+ check_one_card(qts, false, "primary0", MAC_PRIMARY0);
+ check_one_card(qts, false, "standby1", MAC_STANDBY1);
+ check_one_card(qts, false, "primary1", MAC_PRIMARY1);
+
+ qtest_qmp_device_add(qts, "virtio-net", "standby0",
+ "{'bus': 'root0',"
+ "'failover': 'on',"
+ "'netdev': 'hs0',"
+ "'mac': '"MAC_STANDBY0"'}");
+
+ check_one_card(qts, true, "standby0", MAC_STANDBY0);
+ check_one_card(qts, false, "primary0", MAC_PRIMARY0);
+ check_one_card(qts, false, "standby1", MAC_STANDBY1);
+ check_one_card(qts, false, "primary1", MAC_PRIMARY1);
+
+ qtest_qmp_device_add(qts, "virtio-net", "primary0",
+ "{'bus': 'root1',"
+ "'failover_pair_id': 'standby0',"
+ "'netdev': 'hs1',"
+ "'rombar': 0,"
+ "'romfile': '',"
+ "'mac': '"MAC_PRIMARY0"'}");
+
+ check_one_card(qts, true, "standby0", MAC_STANDBY0);
+ check_one_card(qts, false, "primary0", MAC_PRIMARY0);
+ check_one_card(qts, false, "standby1", MAC_STANDBY1);
+ check_one_card(qts, false, "primary1", MAC_PRIMARY1);
+
+ vdev0 = start_virtio_net(qts, 1, 0, "standby0");
+
+ check_one_card(qts, true, "standby0", MAC_STANDBY0);
+ check_one_card(qts, true, "primary0", MAC_PRIMARY0);
+ check_one_card(qts, false, "standby1", MAC_STANDBY1);
+ check_one_card(qts, false, "primary1", MAC_PRIMARY1);
+
+ qtest_qmp_device_add(qts, "virtio-net", "standby1",
+ "{'bus': 'root2',"
+ "'failover': 'on',"
+ "'netdev': 'hs2',"
+ "'mac': '"MAC_STANDBY1"'}");
+
+ check_one_card(qts, true, "standby0", MAC_STANDBY0);
+ check_one_card(qts, true, "primary0", MAC_PRIMARY0);
+ check_one_card(qts, true, "standby1", MAC_STANDBY1);
+ check_one_card(qts, false, "primary1", MAC_PRIMARY1);
+
+ qtest_qmp_device_add(qts, "virtio-net", "primary1",
+ "{'bus': 'root3',"
+ "'failover_pair_id': 'standby1',"
+ "'netdev': 'hs3',"
+ "'rombar': 0,"
+ "'romfile': '',"
+ "'mac': '"MAC_PRIMARY1"'}");
+
+ check_one_card(qts, true, "standby0", MAC_STANDBY0);
+ check_one_card(qts, true, "primary0", MAC_PRIMARY0);
+ check_one_card(qts, true, "standby1", MAC_STANDBY1);
+ check_one_card(qts, false, "primary1", MAC_PRIMARY1);
+
+ vdev1 = start_virtio_net(qts, 3, 0, "standby1");
+
+ check_one_card(qts, true, "standby0", MAC_STANDBY0);
+ check_one_card(qts, true, "primary0", MAC_PRIMARY0);
+ check_one_card(qts, true, "standby1", MAC_STANDBY1);
+ check_one_card(qts, true, "primary1", MAC_PRIMARY1);
+
+ args = qdict_from_jsonf_nofail("{}");
+ g_assert_nonnull(args);
+ qdict_put_str(args, "uri", uri);
+
+ resp = qtest_qmp(qts, "{ 'execute': 'migrate', 'arguments': %p}", args);
+ g_assert(qdict_haskey(resp, "return"));
+ qobject_unref(resp);
+
+ /* the event is sent when QEMU asks the OS to unplug the card */
+ resp = get_unplug_primary_event(qts);
+ if (strcmp(qdict_get_str(resp, "device-id"), "primary0") == 0) {
+ expected = "primary1";
+ } else if (strcmp(qdict_get_str(resp, "device-id"), "primary1") == 0) {
+ expected = "primary0";
+ } else {
+ g_assert_not_reached();
+ }
+ qobject_unref(resp);
+
+ resp = get_unplug_primary_event(qts);
+ g_assert_cmpstr(qdict_get_str(resp, "device-id"), ==, expected);
+ qobject_unref(resp);
+
+ /* wait the end of the migration setup phase */
+ while (true) {
+ ret = migrate_status(qts);
+
+ status = qdict_get_str(ret, "status");
+ if (strcmp(status, "wait-unplug") == 0) {
+ qobject_unref(ret);
+ break;
+ }
+
+ /* The migration must not start if the card is not ejected */
+ g_assert_cmpstr(status, !=, "active");
+ g_assert_cmpstr(status, !=, "completed");
+ g_assert_cmpstr(status, !=, "failed");
+ g_assert_cmpstr(status, !=, "cancelling");
+ g_assert_cmpstr(status, !=, "cancelled");
+
+ qobject_unref(ret);
+ }
+
+ /* OS unplugs primary1, but we must wait the second */
+ qtest_outl(qts, ACPI_PCIHP_ADDR_ICH9 + PCI_EJ_BASE, 1);
+
+ ret = migrate_status(qts);
+ status = qdict_get_str(ret, "status");
+ g_assert_cmpstr(status, ==, "wait-unplug");
+ qobject_unref(ret);
+
+ if (g_test_slow()) {
+ /* check we stay in wait-unplug while the card is not ejected */
+ for (int i = 0; i < 5; i++) {
+ sleep(1);
+ ret = migrate_status(qts);
+ status = qdict_get_str(ret, "status");
+ g_assert_cmpstr(status, ==, "wait-unplug");
+ qobject_unref(ret);
+ }
+ }
+
+ /* OS unplugs primary0, QEMU can move from wait-unplug state */
+ qtest_outl(qts, ACPI_PCIHP_ADDR_ICH9 + PCI_SEL_BASE, 2);
+ qtest_outl(qts, ACPI_PCIHP_ADDR_ICH9 + PCI_EJ_BASE, 1);
+
+ while (true) {
+ ret = migrate_status(qts);
+
+ status = qdict_get_str(ret, "status");
+ if (strcmp(status, "completed") == 0) {
+ qobject_unref(ret);
+ break;
+ }
+ g_assert_cmpstr(status, !=, "failed");
+ g_assert_cmpstr(status, !=, "cancelling");
+ g_assert_cmpstr(status, !=, "cancelled");
+ qobject_unref(ret);
+ }
+
+ qtest_qmp_eventwait(qts, "STOP");
+
+ qos_object_destroy((QOSGraphObject *)vdev0);
+ qos_object_destroy((QOSGraphObject *)vdev1);
+ machine_stop(qts);
+}
+
+static void test_multi_in(gconstpointer opaque)
+{
+ QTestState *qts;
+ QDict *resp, *args, *ret;
+ g_autofree gchar *uri = g_strdup_printf("exec: cat %s", (gchar *)opaque);
+
+ qts = machine_start(BASE_MACHINE
+ "-device pcie-root-port,id=root2,addr=0x3,bus=pcie.0,chassis=3 "
+ "-device pcie-root-port,id=root3,addr=0x4,bus=pcie.0,chassis=4 "
+ "-netdev user,id=hs0 "
+ "-netdev user,id=hs1 "
+ "-netdev user,id=hs2 "
+ "-netdev user,id=hs3 "
+ "-incoming defer ",
+ 4);
+
+ check_one_card(qts, false, "standby0", MAC_STANDBY0);
+ check_one_card(qts, false, "primary0", MAC_PRIMARY0);
+ check_one_card(qts, false, "standby1", MAC_STANDBY1);
+ check_one_card(qts, false, "primary1", MAC_PRIMARY1);
+
+ qtest_qmp_device_add(qts, "virtio-net", "standby0",
+ "{'bus': 'root0',"
+ "'failover': 'on',"
+ "'netdev': 'hs0',"
+ "'mac': '"MAC_STANDBY0"'}");
+
+ check_one_card(qts, true, "standby0", MAC_STANDBY0);
+ check_one_card(qts, false, "primary0", MAC_PRIMARY0);
+ check_one_card(qts, false, "standby1", MAC_STANDBY1);
+ check_one_card(qts, false, "primary1", MAC_PRIMARY1);
+
+ qtest_qmp_device_add(qts, "virtio-net", "primary0",
+ "{'bus': 'root1',"
+ "'failover_pair_id': 'standby0',"
+ "'netdev': 'hs1',"
+ "'rombar': 0,"
+ "'romfile': '',"
+ "'mac': '"MAC_PRIMARY0"'}");
+
+ check_one_card(qts, true, "standby0", MAC_STANDBY0);
+ check_one_card(qts, false, "primary0", MAC_PRIMARY0);
+ check_one_card(qts, false, "standby1", MAC_STANDBY1);
+ check_one_card(qts, false, "primary1", MAC_PRIMARY1);
+
+ qtest_qmp_device_add(qts, "virtio-net", "standby1",
+ "{'bus': 'root2',"
+ "'failover': 'on',"
+ "'netdev': 'hs2',"
+ "'mac': '"MAC_STANDBY1"'}");
+
+ check_one_card(qts, true, "standby0", MAC_STANDBY0);
+ check_one_card(qts, false, "primary0", MAC_PRIMARY0);
+ check_one_card(qts, true, "standby1", MAC_STANDBY1);
+ check_one_card(qts, false, "primary1", MAC_PRIMARY1);
+
+ qtest_qmp_device_add(qts, "virtio-net", "primary1",
+ "{'bus': 'root3',"
+ "'failover_pair_id': 'standby1',"
+ "'netdev': 'hs3',"
+ "'rombar': 0,"
+ "'romfile': '',"
+ "'mac': '"MAC_PRIMARY1"'}");
+
+ check_one_card(qts, true, "standby0", MAC_STANDBY0);
+ check_one_card(qts, false, "primary0", MAC_PRIMARY0);
+ check_one_card(qts, true, "standby1", MAC_STANDBY1);
+ check_one_card(qts, false, "primary1", MAC_PRIMARY1);
+
+ args = qdict_from_jsonf_nofail("{}");
+ g_assert_nonnull(args);
+ qdict_put_str(args, "uri", uri);
+
+ resp = qtest_qmp(qts, "{ 'execute': 'migrate-incoming', 'arguments': %p}",
+ args);
+ g_assert(qdict_haskey(resp, "return"));
+ qobject_unref(resp);
+
+ resp = get_migration_event(qts);
+ g_assert_cmpstr(qdict_get_str(resp, "status"), ==, "setup");
+ qobject_unref(resp);
+
+ resp = get_failover_negociated_event(qts);
+ g_assert_cmpstr(qdict_get_str(resp, "device-id"), ==, "standby0");
+ qobject_unref(resp);
+
+ resp = get_failover_negociated_event(qts);
+ g_assert_cmpstr(qdict_get_str(resp, "device-id"), ==, "standby1");
+ qobject_unref(resp);
+
+ check_one_card(qts, true, "standby0", MAC_STANDBY0);
+ check_one_card(qts, true, "primary0", MAC_PRIMARY0);
+ check_one_card(qts, true, "standby1", MAC_STANDBY1);
+ check_one_card(qts, true, "primary1", MAC_PRIMARY1);
+
+ qtest_qmp_eventwait(qts, "RESUME");
+
+ ret = migrate_status(qts);
+ g_assert_cmpstr(qdict_get_str(ret, "status"), ==, "completed");
+ qobject_unref(ret);
+
+ machine_stop(qts);
+}
+
int main(int argc, char **argv)
{
const gchar *tmpdir = g_get_tmp_dir();
@@ -1060,6 +1338,10 @@ int main(int argc, char **argv)
qtest_add_data_func("failover-virtio-net/migrate/abort/timeout",
tmpfile, test_migrate_abort_timeout);
}
+ qtest_add_data_func("failover-virtio-net/multi/out",
+ tmpfile, test_multi_out);
+ qtest_add_data_func("failover-virtio-net/multi/in",
+ tmpfile, test_multi_in);
ret = g_test_run();
--
2.27.0
^ permalink raw reply related [flat|nested] 24+ messages in thread
* [PULL 05/16] tests/qtest: Run the PPC 32-bit tests with the 64-bit target binary, too
2021-12-15 7:33 [PULL 00/16] qtest and gitlab-CI improvements Thomas Huth
` (3 preceding siblings ...)
2021-12-15 7:33 ` [PULL 04/16] tests/libqtest: add a migration test with two couples of failover devices Thomas Huth
@ 2021-12-15 7:33 ` Thomas Huth
2021-12-15 7:33 ` [PULL 06/16] tests/qtest: Fence the tests that need xlnx-zcu102 with CONFIG_XLNX_ZYNQMP_ARM Thomas Huth
` (12 subsequent siblings)
17 siblings, 0 replies; 24+ messages in thread
From: Thomas Huth @ 2021-12-15 7:33 UTC (permalink / raw)
To: qemu-devel; +Cc: Richard Henderson
The ppc64 target is a superset of the 32-bit target, so we should
include the tests here, too. This used to be done in the past already,
but it got lost during the conversion to meson.
Fixes: a2ce7dbd91 ("meson: convert tests/qtest to meson")
Message-Id: <20211201104347.51922-2-thuth@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
---
tests/qtest/meson.build | 1 +
1 file changed, 1 insertion(+)
diff --git a/tests/qtest/meson.build b/tests/qtest/meson.build
index 975a0f2f5f..36ca175660 100644
--- a/tests/qtest/meson.build
+++ b/tests/qtest/meson.build
@@ -138,6 +138,7 @@ qtests_ppc = \
['boot-order-test', 'prom-env-test', 'boot-serial-test'] \
qtests_ppc64 = \
+ qtests_ppc + \
(config_all_devices.has_key('CONFIG_PSERIES') ? ['device-plug-test'] : []) + \
(config_all_devices.has_key('CONFIG_POWERNV') ? ['pnv-xscom-test'] : []) + \
(config_all_devices.has_key('CONFIG_PSERIES') ? ['rtas-test'] : []) + \
--
2.27.0
^ permalink raw reply related [flat|nested] 24+ messages in thread
* [PULL 06/16] tests/qtest: Fence the tests that need xlnx-zcu102 with CONFIG_XLNX_ZYNQMP_ARM
2021-12-15 7:33 [PULL 00/16] qtest and gitlab-CI improvements Thomas Huth
` (4 preceding siblings ...)
2021-12-15 7:33 ` [PULL 05/16] tests/qtest: Run the PPC 32-bit tests with the 64-bit target binary, too Thomas Huth
@ 2021-12-15 7:33 ` Thomas Huth
2021-12-15 7:33 ` [PULL 07/16] tests/qtest: Add a function that gets a list with available machine types Thomas Huth
` (11 subsequent siblings)
17 siblings, 0 replies; 24+ messages in thread
From: Thomas Huth @ 2021-12-15 7:33 UTC (permalink / raw)
To: qemu-devel; +Cc: Richard Henderson
The 'xlnx-can-test' and the 'fuzz-xlnx-dp-test' need the "xlnx-zcu102"
machine and thus should only be built and run if CONFIG_XLNX_ZYNQMP_ARM
is enabled.
Message-Id: <20211201104347.51922-3-thuth@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
---
tests/qtest/meson.build | 3 +--
1 file changed, 1 insertion(+), 2 deletions(-)
diff --git a/tests/qtest/meson.build b/tests/qtest/meson.build
index 36ca175660..9ff3eaf3d0 100644
--- a/tests/qtest/meson.build
+++ b/tests/qtest/meson.build
@@ -188,11 +188,10 @@ qtests_aarch64 = \
(cpu != 'arm' and unpack_edk2_blobs ? ['bios-tables-test'] : []) + \
(config_all_devices.has_key('CONFIG_TPM_TIS_SYSBUS') ? ['tpm-tis-device-test'] : []) + \
(config_all_devices.has_key('CONFIG_TPM_TIS_SYSBUS') ? ['tpm-tis-device-swtpm-test'] : []) + \
+ (config_all_devices.has_key('CONFIG_XLNX_ZYNQMP_ARM') ? ['xlnx-can-test', 'fuzz-xlnx-dp-test'] : []) + \
['arm-cpu-features',
'numa-test',
'boot-serial-test',
- 'xlnx-can-test',
- 'fuzz-xlnx-dp-test',
'migration-test']
qtests_s390x = \
--
2.27.0
^ permalink raw reply related [flat|nested] 24+ messages in thread
* [PULL 07/16] tests/qtest: Add a function that gets a list with available machine types
2021-12-15 7:33 [PULL 00/16] qtest and gitlab-CI improvements Thomas Huth
` (5 preceding siblings ...)
2021-12-15 7:33 ` [PULL 06/16] tests/qtest: Fence the tests that need xlnx-zcu102 with CONFIG_XLNX_ZYNQMP_ARM Thomas Huth
@ 2021-12-15 7:33 ` Thomas Huth
2021-12-15 7:33 ` [PULL 08/16] tests/qtest: Add a function to check whether a machine is available Thomas Huth
` (10 subsequent siblings)
17 siblings, 0 replies; 24+ messages in thread
From: Thomas Huth @ 2021-12-15 7:33 UTC (permalink / raw)
To: qemu-devel; +Cc: Richard Henderson
For the upcoming patches, we will need a way to gets a list with all
available machine types. Refactor the qtest_cb_for_every_machine()
to split the related code out into a separate new function, and
gather the aliases of the various machine types, too.
Message-Id: <20211201104347.51922-4-thuth@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
---
tests/qtest/libqtest.c | 64 ++++++++++++++++++++++++++++++++++--------
1 file changed, 53 insertions(+), 11 deletions(-)
diff --git a/tests/qtest/libqtest.c b/tests/qtest/libqtest.c
index 25aeea385b..7ae2dc4e1d 100644
--- a/tests/qtest/libqtest.c
+++ b/tests/qtest/libqtest.c
@@ -1321,16 +1321,29 @@ static bool qtest_is_old_versioned_machine(const char *mname)
return res;
}
-void qtest_cb_for_every_machine(void (*cb)(const char *machine),
- bool skip_old_versioned)
+struct MachInfo {
+ char *name;
+ char *alias;
+};
+
+/*
+ * Returns an array with pointers to the available machine names.
+ * The terminating entry has the name set to NULL.
+ */
+static struct MachInfo *qtest_get_machines(void)
{
+ static struct MachInfo *machines;
QDict *response, *minfo;
QList *list;
const QListEntry *p;
QObject *qobj;
QString *qstr;
- const char *mname;
QTestState *qts;
+ int idx;
+
+ if (machines) {
+ return machines;
+ }
qts = qtest_init("-machine none");
response = qtest_qmp(qts, "{ 'execute': 'query-machines' }");
@@ -1338,25 +1351,54 @@ void qtest_cb_for_every_machine(void (*cb)(const char *machine),
list = qdict_get_qlist(response, "return");
g_assert(list);
- for (p = qlist_first(list); p; p = qlist_next(p)) {
+ machines = g_new(struct MachInfo, qlist_size(list) + 1);
+
+ for (p = qlist_first(list), idx = 0; p; p = qlist_next(p), idx++) {
minfo = qobject_to(QDict, qlist_entry_obj(p));
g_assert(minfo);
+
qobj = qdict_get(minfo, "name");
g_assert(qobj);
qstr = qobject_to(QString, qobj);
g_assert(qstr);
- mname = qstring_get_str(qstr);
- /* Ignore machines that cannot be used for qtests */
- if (!strncmp("xenfv", mname, 5) || g_str_equal("xenpv", mname)) {
- continue;
- }
- if (!skip_old_versioned || !qtest_is_old_versioned_machine(mname)) {
- cb(mname);
+ machines[idx].name = g_strdup(qstring_get_str(qstr));
+
+ qobj = qdict_get(minfo, "alias");
+ if (qobj) { /* The alias is optional */
+ qstr = qobject_to(QString, qobj);
+ g_assert(qstr);
+ machines[idx].alias = g_strdup(qstring_get_str(qstr));
+ } else {
+ machines[idx].alias = NULL;
}
}
qtest_quit(qts);
qobject_unref(response);
+
+ memset(&machines[idx], 0, sizeof(struct MachInfo)); /* Terminating entry */
+ return machines;
+}
+
+void qtest_cb_for_every_machine(void (*cb)(const char *machine),
+ bool skip_old_versioned)
+{
+ struct MachInfo *machines;
+ int i;
+
+ machines = qtest_get_machines();
+
+ for (i = 0; machines[i].name != NULL; i++) {
+ /* Ignore machines that cannot be used for qtests */
+ if (!strncmp("xenfv", machines[i].name, 5) ||
+ g_str_equal("xenpv", machines[i].name)) {
+ continue;
+ }
+ if (!skip_old_versioned ||
+ !qtest_is_old_versioned_machine(machines[i].name)) {
+ cb(machines[i].name);
+ }
+ }
}
/*
--
2.27.0
^ permalink raw reply related [flat|nested] 24+ messages in thread
* [PULL 08/16] tests/qtest: Add a function to check whether a machine is available
2021-12-15 7:33 [PULL 00/16] qtest and gitlab-CI improvements Thomas Huth
` (6 preceding siblings ...)
2021-12-15 7:33 ` [PULL 07/16] tests/qtest: Add a function that gets a list with available machine types Thomas Huth
@ 2021-12-15 7:33 ` Thomas Huth
2021-12-15 7:33 ` [PULL 09/16] Move the libssh setup from configure to meson.build Thomas Huth
` (9 subsequent siblings)
17 siblings, 0 replies; 24+ messages in thread
From: Thomas Huth @ 2021-12-15 7:33 UTC (permalink / raw)
To: qemu-devel; +Cc: John Snow, Richard Henderson
It is nowadays possible to build QEMU with a reduced set of machines
in each binary. However, the qtests still hard-code the expected
machines and fail if the binary does not feature the required machine.
Let's get a little bit more flexible here: Add a function that can be
used to query whether a certain machine is available or not, and use
it in some tests as an example (more work has to be done in other
tests which will follow later).
Message-Id: <20211201104347.51922-5-thuth@redhat.com>
Acked-by: John Snow <jsnow@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
---
tests/qtest/boot-serial-test.c | 3 ++-
tests/qtest/cdrom-test.c | 8 +++++---
tests/qtest/libqos/libqtest.h | 8 ++++++++
tests/qtest/libqtest.c | 17 +++++++++++++++++
tests/qtest/prom-env-test.c | 8 +++++---
5 files changed, 37 insertions(+), 7 deletions(-)
diff --git a/tests/qtest/boot-serial-test.c b/tests/qtest/boot-serial-test.c
index 83828ba270..4d8e1343bd 100644
--- a/tests/qtest/boot-serial-test.c
+++ b/tests/qtest/boot-serial-test.c
@@ -285,7 +285,8 @@ int main(int argc, char *argv[])
g_test_init(&argc, &argv, NULL);
for (i = 0; tests[i].arch != NULL; i++) {
- if (strcmp(arch, tests[i].arch) == 0) {
+ if (g_str_equal(arch, tests[i].arch) &&
+ qtest_has_machine(tests[i].machine)) {
char *name = g_strdup_printf("boot-serial/%s", tests[i].machine);
qtest_add_data_func(name, &tests[i], test_machine);
g_free(name);
diff --git a/tests/qtest/cdrom-test.c b/tests/qtest/cdrom-test.c
index 5af944a5fb..c1fcac5c45 100644
--- a/tests/qtest/cdrom-test.c
+++ b/tests/qtest/cdrom-test.c
@@ -109,9 +109,11 @@ static void test_cdrom_param(gconstpointer data)
static void add_cdrom_param_tests(const char **machines)
{
while (*machines) {
- char *testname = g_strdup_printf("cdrom/param/%s", *machines);
- qtest_add_data_func(testname, *machines, test_cdrom_param);
- g_free(testname);
+ if (qtest_has_machine(*machines)) {
+ char *testname = g_strdup_printf("cdrom/param/%s", *machines);
+ qtest_add_data_func(testname, *machines, test_cdrom_param);
+ g_free(testname);
+ }
machines++;
}
}
diff --git a/tests/qtest/libqos/libqtest.h b/tests/qtest/libqos/libqtest.h
index 59e9271195..dff6b31cf0 100644
--- a/tests/qtest/libqos/libqtest.h
+++ b/tests/qtest/libqos/libqtest.h
@@ -710,6 +710,14 @@ QDict *qmp_fd(int fd, const char *fmt, ...) GCC_FMT_ATTR(2, 3);
void qtest_cb_for_every_machine(void (*cb)(const char *machine),
bool skip_old_versioned);
+/**
+ * qtest_has_machine:
+ * @machine: The machine to look for
+ *
+ * Returns: true if the machine is available in the target binary.
+ */
+bool qtest_has_machine(const char *machine);
+
/**
* qtest_qmp_device_add_qdict:
* @qts: QTestState instance to operate on
diff --git a/tests/qtest/libqtest.c b/tests/qtest/libqtest.c
index 7ae2dc4e1d..65ed949685 100644
--- a/tests/qtest/libqtest.c
+++ b/tests/qtest/libqtest.c
@@ -1401,6 +1401,23 @@ void qtest_cb_for_every_machine(void (*cb)(const char *machine),
}
}
+bool qtest_has_machine(const char *machine)
+{
+ struct MachInfo *machines;
+ int i;
+
+ machines = qtest_get_machines();
+
+ for (i = 0; machines[i].name != NULL; i++) {
+ if (g_str_equal(machine, machines[i].name) ||
+ (machines[i].alias && g_str_equal(machine, machines[i].alias))) {
+ return true;
+ }
+ }
+
+ return false;
+}
+
/*
* Generic hot-plugging test via the device_add QMP commands.
*/
diff --git a/tests/qtest/prom-env-test.c b/tests/qtest/prom-env-test.c
index f41d80154a..bdbb01d8e5 100644
--- a/tests/qtest/prom-env-test.c
+++ b/tests/qtest/prom-env-test.c
@@ -71,9 +71,11 @@ static void add_tests(const char *machines[])
char *name;
for (i = 0; machines[i] != NULL; i++) {
- name = g_strdup_printf("prom-env/%s", machines[i]);
- qtest_add_data_func(name, machines[i], test_machine);
- g_free(name);
+ if (qtest_has_machine(machines[i])) {
+ name = g_strdup_printf("prom-env/%s", machines[i]);
+ qtest_add_data_func(name, machines[i], test_machine);
+ g_free(name);
+ }
}
}
--
2.27.0
^ permalink raw reply related [flat|nested] 24+ messages in thread
* [PULL 09/16] Move the libssh setup from configure to meson.build
2021-12-15 7:33 [PULL 00/16] qtest and gitlab-CI improvements Thomas Huth
` (7 preceding siblings ...)
2021-12-15 7:33 ` [PULL 08/16] tests/qtest: Add a function to check whether a machine is available Thomas Huth
@ 2021-12-15 7:33 ` Thomas Huth
2021-12-15 7:33 ` [PULL 10/16] gitlab-ci.d/buildtest: Add jobs that run the device-crash-test Thomas Huth
` (8 subsequent siblings)
17 siblings, 0 replies; 24+ messages in thread
From: Thomas Huth @ 2021-12-15 7:33 UTC (permalink / raw)
To: qemu-devel; +Cc: Richard Henderson, Richard W . M . Jones
It's easier to do this in meson.build now.
Message-Id: <20211209144801.148388-1-thuth@redhat.com>
Acked-by: Richard W.M. Jones <rjones@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
---
configure | 27 ---------------------------
meson.build | 13 +++++++++----
meson_options.txt | 2 ++
scripts/meson-buildoptions.sh | 3 +++
4 files changed, 14 insertions(+), 31 deletions(-)
diff --git a/configure b/configure
index 48c21775f3..bb99a40ed0 100755
--- a/configure
+++ b/configure
@@ -344,7 +344,6 @@ debug_stack_usage="no"
crypto_afalg="no"
tls_priority="NORMAL"
tpm="$default_feature"
-libssh="$default_feature"
live_block_migration=${default_feature:-yes}
numa="$default_feature"
replication=${default_feature:-yes}
@@ -1078,10 +1077,6 @@ for opt do
;;
--enable-tpm) tpm="yes"
;;
- --disable-libssh) libssh="no"
- ;;
- --enable-libssh) libssh="yes"
- ;;
--disable-live-block-migration) live_block_migration="no"
;;
--enable-live-block-migration) live_block_migration="yes"
@@ -1448,7 +1443,6 @@ cat << EOF
live-block-migration Block migration in the main migration stream
coroutine-pool coroutine freelist (better performance)
tpm TPM support
- libssh ssh block device support
numa libnuma support
avx2 AVX2 optimization support
avx512f AVX512F optimization support
@@ -2561,21 +2555,6 @@ if test "$modules" = yes; then
fi
fi
-##########################################
-# libssh probe
-if test "$libssh" != "no" ; then
- if $pkg_config --exists "libssh >= 0.8.7"; then
- libssh_cflags=$($pkg_config libssh --cflags)
- libssh_libs=$($pkg_config libssh --libs)
- libssh=yes
- else
- if test "$libssh" = "yes" ; then
- error_exit "libssh required for --enable-libssh"
- fi
- libssh=no
- fi
-fi
-
##########################################
# TPM emulation is only on POSIX
@@ -3636,12 +3615,6 @@ if test "$cmpxchg128" = "yes" ; then
echo "CONFIG_CMPXCHG128=y" >> $config_host_mak
fi
-if test "$libssh" = "yes" ; then
- echo "CONFIG_LIBSSH=y" >> $config_host_mak
- echo "LIBSSH_CFLAGS=$libssh_cflags" >> $config_host_mak
- echo "LIBSSH_LIBS=$libssh_libs" >> $config_host_mak
-fi
-
if test "$live_block_migration" = "yes" ; then
echo "CONFIG_LIVE_BLOCK_MIGRATION=y" >> $config_host_mak
fi
diff --git a/meson.build b/meson.build
index 96de1a6ef9..ae67ca28ab 100644
--- a/meson.build
+++ b/meson.build
@@ -874,11 +874,15 @@ if not get_option('glusterfs').auto() or have_block
''', dependencies: glusterfs)
endif
endif
+
libssh = not_found
-if 'CONFIG_LIBSSH' in config_host
- libssh = declare_dependency(compile_args: config_host['LIBSSH_CFLAGS'].split(),
- link_args: config_host['LIBSSH_LIBS'].split())
+if not get_option('libssh').auto() or have_block
+ libssh = dependency('libssh', version: '>=0.8.7',
+ method: 'pkg-config',
+ required: get_option('libssh'),
+ kwargs: static_kwargs)
endif
+
libbzip2 = not_found
if not get_option('bzip2').auto() or have_block
libbzip2 = cc.find_library('bz2', has_headers: ['bzlib.h'],
@@ -1451,6 +1455,7 @@ config_host_data.set('CONFIG_EBPF', libbpf.found())
config_host_data.set('CONFIG_LIBDAXCTL', libdaxctl.found())
config_host_data.set('CONFIG_LIBISCSI', libiscsi.found())
config_host_data.set('CONFIG_LIBNFS', libnfs.found())
+config_host_data.set('CONFIG_LIBSSH', libssh.found())
config_host_data.set('CONFIG_LINUX_AIO', libaio.found())
config_host_data.set('CONFIG_LINUX_IO_URING', linux_io_uring.found())
config_host_data.set('CONFIG_LIBPMEM', libpmem.found())
@@ -3430,7 +3435,7 @@ endif
summary_info += {'seccomp support': seccomp}
summary_info += {'GlusterFS support': glusterfs}
summary_info += {'TPM support': config_host.has_key('CONFIG_TPM')}
-summary_info += {'libssh support': config_host.has_key('CONFIG_LIBSSH')}
+summary_info += {'libssh support': libssh}
summary_info += {'lzo support': lzo}
summary_info += {'snappy support': snappy}
summary_info += {'bzip2 support': libbzip2}
diff --git a/meson_options.txt b/meson_options.txt
index e392323732..4114bfcaa4 100644
--- a/meson_options.txt
+++ b/meson_options.txt
@@ -105,6 +105,8 @@ option('libdaxctl', type : 'feature', value : 'auto',
description: 'libdaxctl support')
option('libpmem', type : 'feature', value : 'auto',
description: 'libpmem support')
+option('libssh', type : 'feature', value : 'auto',
+ description: 'ssh block device support')
option('libudev', type : 'feature', value : 'auto',
description: 'Use libudev to enumerate host devices')
option('libusb', type : 'feature', value : 'auto',
diff --git a/scripts/meson-buildoptions.sh b/scripts/meson-buildoptions.sh
index 7a17ff4218..ae8f18edc2 100644
--- a/scripts/meson-buildoptions.sh
+++ b/scripts/meson-buildoptions.sh
@@ -53,6 +53,7 @@ meson_options_help() {
printf "%s\n" ' libiscsi libiscsi userspace initiator'
printf "%s\n" ' libnfs libnfs block device driver'
printf "%s\n" ' libpmem libpmem support'
+ printf "%s\n" ' libssh ssh block device support'
printf "%s\n" ' libudev Use libudev to enumerate host devices'
printf "%s\n" ' libusb libusb support for USB passthrough'
printf "%s\n" ' libxml2 libxml2 support for Parallels image format'
@@ -177,6 +178,8 @@ _meson_option_parse() {
--disable-libnfs) printf "%s" -Dlibnfs=disabled ;;
--enable-libpmem) printf "%s" -Dlibpmem=enabled ;;
--disable-libpmem) printf "%s" -Dlibpmem=disabled ;;
+ --enable-libssh) printf "%s" -Dlibssh=enabled ;;
+ --disable-libssh) printf "%s" -Dlibssh=disabled ;;
--enable-libudev) printf "%s" -Dlibudev=enabled ;;
--disable-libudev) printf "%s" -Dlibudev=disabled ;;
--enable-libusb) printf "%s" -Dlibusb=enabled ;;
--
2.27.0
^ permalink raw reply related [flat|nested] 24+ messages in thread
* [PULL 10/16] gitlab-ci.d/buildtest: Add jobs that run the device-crash-test
2021-12-15 7:33 [PULL 00/16] qtest and gitlab-CI improvements Thomas Huth
` (8 preceding siblings ...)
2021-12-15 7:33 ` [PULL 09/16] Move the libssh setup from configure to meson.build Thomas Huth
@ 2021-12-15 7:33 ` Thomas Huth
2021-12-15 7:33 ` [PULL 11/16] gitlab-ci: Add cirrus-ci based tests for NetBSD and OpenBSD Thomas Huth
` (7 subsequent siblings)
17 siblings, 0 replies; 24+ messages in thread
From: Thomas Huth @ 2021-12-15 7:33 UTC (permalink / raw)
To: qemu-devel; +Cc: Philippe Mathieu-Daudé, Richard Henderson
The device-crash-test script has been quite neglected in the past,
so that it bit-rot quite often. Let's add CI jobs that run this
script for at least some targets, so that this script does not
regress that easily anymore.
Message-Id: <20211126162724.1162049-1-thuth@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
---
.gitlab-ci.d/buildtest.yml | 23 +++++++++++++++++++++++
1 file changed, 23 insertions(+)
diff --git a/.gitlab-ci.d/buildtest.yml b/.gitlab-ci.d/buildtest.yml
index 71d0f407ad..7e1cb0b3c2 100644
--- a/.gitlab-ci.d/buildtest.yml
+++ b/.gitlab-ci.d/buildtest.yml
@@ -100,6 +100,17 @@ avocado-system-debian:
IMAGE: debian-amd64
MAKE_CHECK_ARGS: check-avocado
+crash-test-debian:
+ extends: .native_test_job_template
+ needs:
+ - job: build-system-debian
+ artifacts: true
+ variables:
+ IMAGE: debian-amd64
+ script:
+ - cd build
+ - scripts/device-crash-test -q ./qemu-system-i386
+
build-system-fedora:
extends: .native_build_job_template
needs:
@@ -134,6 +145,18 @@ avocado-system-fedora:
IMAGE: fedora
MAKE_CHECK_ARGS: check-avocado
+crash-test-fedora:
+ extends: .native_test_job_template
+ needs:
+ - job: build-system-fedora
+ artifacts: true
+ variables:
+ IMAGE: fedora
+ script:
+ - cd build
+ - scripts/device-crash-test -q ./qemu-system-ppc
+ - scripts/device-crash-test -q ./qemu-system-riscv32
+
build-system-centos:
extends: .native_build_job_template
needs:
--
2.27.0
^ permalink raw reply related [flat|nested] 24+ messages in thread
* [PULL 11/16] gitlab-ci: Add cirrus-ci based tests for NetBSD and OpenBSD
2021-12-15 7:33 [PULL 00/16] qtest and gitlab-CI improvements Thomas Huth
` (9 preceding siblings ...)
2021-12-15 7:33 ` [PULL 10/16] gitlab-ci.d/buildtest: Add jobs that run the device-crash-test Thomas Huth
@ 2021-12-15 7:33 ` Thomas Huth
2021-12-15 7:33 ` [PULL 12/16] virtio-iommu: Remove set_config callback Thomas Huth
` (6 subsequent siblings)
17 siblings, 0 replies; 24+ messages in thread
From: Thomas Huth @ 2021-12-15 7:33 UTC (permalink / raw)
To: qemu-devel; +Cc: Richard Henderson
Cirrus-CI provides KVM in their Linux containers, so we can also run
our VM-based NetBSD and OpenBSD build jobs there.
Since the VM installation might take a while, we only run the "help"
target on the first invocation to avoid timeouts, and then only check
the build during the next run, once the base image has been cached.
For the the build tests, we also only use very a limited set of target
CPUs since compiling in these VMs is not very fast (especially the
build on OpenBSD seems to be incredibly slow).
The jobs are marked as "manual" only, since this double-indirect setup
(with the cirrus-run script and VMs in the Cirrus-CI containers) might
fail more often than the other jobs, and since we can trigger a limited
amount of Cirrus-CI jobs at a time anyway (due to the restrictions in
the free tier of Cirrus). Thus these jobs are rather added as convenience
for contributors who would like to run the NetBSD/OpenBSD tests without
the need of downloading and installing the corresponding VM images on
their local machines.
Message-Id: <20211209103124.121942-1-thuth@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
---
.gitlab-ci.d/cirrus.yml | 35 +++++++++++++++++++++++++++++++
.gitlab-ci.d/cirrus/kvm-build.yml | 31 +++++++++++++++++++++++++++
2 files changed, 66 insertions(+)
create mode 100644 .gitlab-ci.d/cirrus/kvm-build.yml
diff --git a/.gitlab-ci.d/cirrus.yml b/.gitlab-ci.d/cirrus.yml
index d273a9e713..19e6c21401 100644
--- a/.gitlab-ci.d/cirrus.yml
+++ b/.gitlab-ci.d/cirrus.yml
@@ -89,3 +89,38 @@ x64-macos-11-base-build:
PATH_EXTRA: /usr/local/opt/ccache/libexec:/usr/local/opt/gettext/bin
PKG_CONFIG_PATH: /usr/local/opt/curl/lib/pkgconfig:/usr/local/opt/ncurses/lib/pkgconfig:/usr/local/opt/readline/lib/pkgconfig
TEST_TARGETS: check-unit check-block check-qapi-schema check-softfloat check-qtest-x86_64
+
+
+# The following jobs run VM-based tests via KVM on a Linux-based Cirrus-CI job
+.cirrus_kvm_job:
+ stage: build
+ image: registry.gitlab.com/libvirt/libvirt-ci/cirrus-run:master
+ needs: []
+ timeout: 80m
+ allow_failure: true
+ script:
+ - sed -e "s|[@]CI_REPOSITORY_URL@|$CI_REPOSITORY_URL|g"
+ -e "s|[@]CI_COMMIT_REF_NAME@|$CI_COMMIT_REF_NAME|g"
+ -e "s|[@]CI_COMMIT_SHA@|$CI_COMMIT_SHA|g"
+ -e "s|[@]NAME@|$NAME|g"
+ -e "s|[@]CONFIGURE_ARGS@|$CONFIGURE_ARGS|g"
+ -e "s|[@]TEST_TARGETS@|$TEST_TARGETS|g"
+ <.gitlab-ci.d/cirrus/kvm-build.yml >.gitlab-ci.d/cirrus/$NAME.yml
+ - cat .gitlab-ci.d/cirrus/$NAME.yml
+ - cirrus-run -v --show-build-log always .gitlab-ci.d/cirrus/$NAME.yml
+ rules:
+ - when: manual
+
+x86-netbsd:
+ extends: .cirrus_kvm_job
+ variables:
+ NAME: netbsd
+ CONFIGURE_ARGS: --target-list=x86_64-softmmu,ppc64-softmmu,aarch64-softmmu
+ TEST_TARGETS: check
+
+x86-openbsd:
+ extends: .cirrus_kvm_job
+ variables:
+ NAME: openbsd
+ CONFIGURE_ARGS: --target-list=i386-softmmu,riscv64-softmmu,mips64-softmmu
+ TEST_TARGETS: check
diff --git a/.gitlab-ci.d/cirrus/kvm-build.yml b/.gitlab-ci.d/cirrus/kvm-build.yml
new file mode 100644
index 0000000000..4334fabf39
--- /dev/null
+++ b/.gitlab-ci.d/cirrus/kvm-build.yml
@@ -0,0 +1,31 @@
+container:
+ image: fedora:35
+ cpu: 4
+ memory: 8Gb
+ kvm: true
+
+env:
+ CIRRUS_CLONE_DEPTH: 1
+ CI_REPOSITORY_URL: "@CI_REPOSITORY_URL@"
+ CI_COMMIT_REF_NAME: "@CI_COMMIT_REF_NAME@"
+ CI_COMMIT_SHA: "@CI_COMMIT_SHA@"
+
+@NAME@_task:
+ @NAME@_vm_cache:
+ folder: $HOME/.cache/qemu-vm
+ install_script:
+ - dnf update -y
+ - dnf install -y git make openssh-clients qemu-img qemu-system-x86 wget
+ clone_script:
+ - git clone --depth 100 "$CI_REPOSITORY_URL" .
+ - git fetch origin "$CI_COMMIT_REF_NAME"
+ - git reset --hard "$CI_COMMIT_SHA"
+ build_script:
+ - if [ -f $HOME/.cache/qemu-vm/images/@NAME@.img ]; then
+ make vm-build-@NAME@ J=$(getconf _NPROCESSORS_ONLN)
+ EXTRA_CONFIGURE_OPTS="@CONFIGURE_ARGS@"
+ BUILD_TARGET="@TEST_TARGETS@" ;
+ else
+ make vm-build-@NAME@ J=$(getconf _NPROCESSORS_ONLN) BUILD_TARGET=help
+ EXTRA_CONFIGURE_OPTS="--disable-system --disable-user --disable-tools" ;
+ fi
--
2.27.0
^ permalink raw reply related [flat|nested] 24+ messages in thread
* [PULL 12/16] virtio-iommu: Remove set_config callback
2021-12-15 7:33 [PULL 00/16] qtest and gitlab-CI improvements Thomas Huth
` (10 preceding siblings ...)
2021-12-15 7:33 ` [PULL 11/16] gitlab-ci: Add cirrus-ci based tests for NetBSD and OpenBSD Thomas Huth
@ 2021-12-15 7:33 ` Thomas Huth
2021-12-15 7:33 ` [PULL 13/16] virtio-iommu: Fix endianness in get_config Thomas Huth
` (5 subsequent siblings)
17 siblings, 0 replies; 24+ messages in thread
From: Thomas Huth @ 2021-12-15 7:33 UTC (permalink / raw)
To: qemu-devel; +Cc: Eric Auger, Richard Henderson, Jean-Philippe Brucker
From: Eric Auger <eric.auger@redhat.com>
The spec says "the driver must not write to device configuration
fields". So remove the set_config() callback which anyway did
not do anything.
Signed-off-by: Eric Auger <eric.auger@redhat.com>
Reviewed-by: Jean-Philippe Brucker <jean-philippe@linaro.org>
Message-Id: <20211127072910.1261824-2-eric.auger@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
---
hw/virtio/trace-events | 1 -
hw/virtio/virtio-iommu.c | 14 --------------
2 files changed, 15 deletions(-)
diff --git a/hw/virtio/trace-events b/hw/virtio/trace-events
index 650e521e35..54bd7da00c 100644
--- a/hw/virtio/trace-events
+++ b/hw/virtio/trace-events
@@ -92,7 +92,6 @@ virtio_iommu_device_reset(void) "reset!"
virtio_iommu_get_features(uint64_t features) "device supports features=0x%"PRIx64
virtio_iommu_device_status(uint8_t status) "driver status = %d"
virtio_iommu_get_config(uint64_t page_size_mask, uint64_t start, uint64_t end, uint32_t domain_range, uint32_t probe_size) "page_size_mask=0x%"PRIx64" start=0x%"PRIx64" end=0x%"PRIx64" domain_range=%d probe_size=0x%x"
-virtio_iommu_set_config(uint64_t page_size_mask, uint64_t start, uint64_t end, uint32_t domain_range, uint32_t probe_size) "page_size_mask=0x%"PRIx64" start=0x%"PRIx64" end=0x%"PRIx64" domain_bits=%d probe_size=0x%x"
virtio_iommu_attach(uint32_t domain_id, uint32_t ep_id) "domain=%d endpoint=%d"
virtio_iommu_detach(uint32_t domain_id, uint32_t ep_id) "domain=%d endpoint=%d"
virtio_iommu_map(uint32_t domain_id, uint64_t virt_start, uint64_t virt_end, uint64_t phys_start, uint32_t flags) "domain=%d virt_start=0x%"PRIx64" virt_end=0x%"PRIx64 " phys_start=0x%"PRIx64" flags=%d"
diff --git a/hw/virtio/virtio-iommu.c b/hw/virtio/virtio-iommu.c
index 1b23e8e18c..645c0aa399 100644
--- a/hw/virtio/virtio-iommu.c
+++ b/hw/virtio/virtio-iommu.c
@@ -832,19 +832,6 @@ static void virtio_iommu_get_config(VirtIODevice *vdev, uint8_t *config_data)
memcpy(config_data, &dev->config, sizeof(struct virtio_iommu_config));
}
-static void virtio_iommu_set_config(VirtIODevice *vdev,
- const uint8_t *config_data)
-{
- struct virtio_iommu_config config;
-
- memcpy(&config, config_data, sizeof(struct virtio_iommu_config));
- trace_virtio_iommu_set_config(config.page_size_mask,
- config.input_range.start,
- config.input_range.end,
- config.domain_range.end,
- config.probe_size);
-}
-
static uint64_t virtio_iommu_get_features(VirtIODevice *vdev, uint64_t f,
Error **errp)
{
@@ -1185,7 +1172,6 @@ static void virtio_iommu_class_init(ObjectClass *klass, void *data)
vdc->unrealize = virtio_iommu_device_unrealize;
vdc->reset = virtio_iommu_device_reset;
vdc->get_config = virtio_iommu_get_config;
- vdc->set_config = virtio_iommu_set_config;
vdc->get_features = virtio_iommu_get_features;
vdc->set_status = virtio_iommu_set_status;
vdc->vmsd = &vmstate_virtio_iommu_device;
--
2.27.0
^ permalink raw reply related [flat|nested] 24+ messages in thread
* [PULL 13/16] virtio-iommu: Fix endianness in get_config
2021-12-15 7:33 [PULL 00/16] qtest and gitlab-CI improvements Thomas Huth
` (11 preceding siblings ...)
2021-12-15 7:33 ` [PULL 12/16] virtio-iommu: Remove set_config callback Thomas Huth
@ 2021-12-15 7:33 ` Thomas Huth
2021-12-15 7:34 ` [PULL 14/16] virtio-iommu: Fix the domain_range end Thomas Huth
` (4 subsequent siblings)
17 siblings, 0 replies; 24+ messages in thread
From: Thomas Huth @ 2021-12-15 7:33 UTC (permalink / raw)
To: qemu-devel; +Cc: Eric Auger, Richard Henderson, Jean-Philippe Brucker
From: Eric Auger <eric.auger@redhat.com>
Endianess is not properly handled when populating
the returned config. Use the cpu_to_le* primitives
for each separate field. Also, while at it, trace
the domain range start.
Reported-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Eric Auger <eric.auger@redhat.com>
Reviewed-by: Jean-Philippe Brucker <jean-philippe@linaro.org>
Message-Id: <20211127072910.1261824-3-eric.auger@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
---
hw/virtio/trace-events | 2 +-
hw/virtio/virtio-iommu.c | 24 ++++++++++++++++--------
2 files changed, 17 insertions(+), 9 deletions(-)
diff --git a/hw/virtio/trace-events b/hw/virtio/trace-events
index 54bd7da00c..f7ad6be5fb 100644
--- a/hw/virtio/trace-events
+++ b/hw/virtio/trace-events
@@ -91,7 +91,7 @@ virtio_mmio_setting_irq(int level) "virtio_mmio setting IRQ %d"
virtio_iommu_device_reset(void) "reset!"
virtio_iommu_get_features(uint64_t features) "device supports features=0x%"PRIx64
virtio_iommu_device_status(uint8_t status) "driver status = %d"
-virtio_iommu_get_config(uint64_t page_size_mask, uint64_t start, uint64_t end, uint32_t domain_range, uint32_t probe_size) "page_size_mask=0x%"PRIx64" start=0x%"PRIx64" end=0x%"PRIx64" domain_range=%d probe_size=0x%x"
+virtio_iommu_get_config(uint64_t page_size_mask, uint64_t start, uint64_t end, uint32_t domain_start, uint32_t domain_end, uint32_t probe_size) "page_size_mask=0x%"PRIx64" input range start=0x%"PRIx64" input range end=0x%"PRIx64" domain range start=%d domain range end=%d probe_size=0x%x"
virtio_iommu_attach(uint32_t domain_id, uint32_t ep_id) "domain=%d endpoint=%d"
virtio_iommu_detach(uint32_t domain_id, uint32_t ep_id) "domain=%d endpoint=%d"
virtio_iommu_map(uint32_t domain_id, uint64_t virt_start, uint64_t virt_end, uint64_t phys_start, uint32_t flags) "domain=%d virt_start=0x%"PRIx64" virt_end=0x%"PRIx64 " phys_start=0x%"PRIx64" flags=%d"
diff --git a/hw/virtio/virtio-iommu.c b/hw/virtio/virtio-iommu.c
index 645c0aa399..30ee09187b 100644
--- a/hw/virtio/virtio-iommu.c
+++ b/hw/virtio/virtio-iommu.c
@@ -822,14 +822,22 @@ unlock:
static void virtio_iommu_get_config(VirtIODevice *vdev, uint8_t *config_data)
{
VirtIOIOMMU *dev = VIRTIO_IOMMU(vdev);
- struct virtio_iommu_config *config = &dev->config;
-
- trace_virtio_iommu_get_config(config->page_size_mask,
- config->input_range.start,
- config->input_range.end,
- config->domain_range.end,
- config->probe_size);
- memcpy(config_data, &dev->config, sizeof(struct virtio_iommu_config));
+ struct virtio_iommu_config *dev_config = &dev->config;
+ struct virtio_iommu_config *out_config = (void *)config_data;
+
+ out_config->page_size_mask = cpu_to_le64(dev_config->page_size_mask);
+ out_config->input_range.start = cpu_to_le64(dev_config->input_range.start);
+ out_config->input_range.end = cpu_to_le64(dev_config->input_range.end);
+ out_config->domain_range.start = cpu_to_le32(dev_config->domain_range.start);
+ out_config->domain_range.end = cpu_to_le32(dev_config->domain_range.end);
+ out_config->probe_size = cpu_to_le32(dev_config->probe_size);
+
+ trace_virtio_iommu_get_config(dev_config->page_size_mask,
+ dev_config->input_range.start,
+ dev_config->input_range.end,
+ dev_config->domain_range.start,
+ dev_config->domain_range.end,
+ dev_config->probe_size);
}
static uint64_t virtio_iommu_get_features(VirtIODevice *vdev, uint64_t f,
--
2.27.0
^ permalink raw reply related [flat|nested] 24+ messages in thread
* [PULL 14/16] virtio-iommu: Fix the domain_range end
2021-12-15 7:33 [PULL 00/16] qtest and gitlab-CI improvements Thomas Huth
` (12 preceding siblings ...)
2021-12-15 7:33 ` [PULL 13/16] virtio-iommu: Fix endianness in get_config Thomas Huth
@ 2021-12-15 7:34 ` Thomas Huth
2021-12-15 7:34 ` [PULL 15/16] tests: qtest: Add virtio-iommu test Thomas Huth
` (3 subsequent siblings)
17 siblings, 0 replies; 24+ messages in thread
From: Thomas Huth @ 2021-12-15 7:34 UTC (permalink / raw)
To: qemu-devel; +Cc: Eric Auger, Richard Henderson, Jean-Philippe Brucker
From: Eric Auger <eric.auger@redhat.com>
in old times the domain range was defined by a domain_bits le32.
This was then converted into a domain_range struct. During the
upgrade the original value of '32' (bits) has been kept while
the end field now is the max value of the domain id (UINT32_MAX).
Fix that and also use UINT64_MAX for the input_range.end.
Reported-by: Jean-Philippe Brucker <jean-philippe@linaro.org>
Signed-off-by: Eric Auger <eric.auger@redhat.com>
Reviewed-by: Jean-Philippe Brucker <jean-philippe@linaro.org>
Message-Id: <20211127072910.1261824-4-eric.auger@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
---
hw/virtio/virtio-iommu.c | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/hw/virtio/virtio-iommu.c b/hw/virtio/virtio-iommu.c
index 30ee09187b..aa9c16a17b 100644
--- a/hw/virtio/virtio-iommu.c
+++ b/hw/virtio/virtio-iommu.c
@@ -978,8 +978,8 @@ static void virtio_iommu_device_realize(DeviceState *dev, Error **errp)
s->event_vq = virtio_add_queue(vdev, VIOMMU_DEFAULT_QUEUE_SIZE, NULL);
s->config.page_size_mask = TARGET_PAGE_MASK;
- s->config.input_range.end = -1UL;
- s->config.domain_range.end = 32;
+ s->config.input_range.end = UINT64_MAX;
+ s->config.domain_range.end = UINT32_MAX;
s->config.probe_size = VIOMMU_PROBE_SIZE;
virtio_add_feature(&s->features, VIRTIO_RING_F_EVENT_IDX);
--
2.27.0
^ permalink raw reply related [flat|nested] 24+ messages in thread
* [PULL 15/16] tests: qtest: Add virtio-iommu test
2021-12-15 7:33 [PULL 00/16] qtest and gitlab-CI improvements Thomas Huth
` (13 preceding siblings ...)
2021-12-15 7:34 ` [PULL 14/16] virtio-iommu: Fix the domain_range end Thomas Huth
@ 2021-12-15 7:34 ` Thomas Huth
2021-12-15 7:34 ` [PULL 16/16] gitlab-ci: Test compilation on Windows with MSYS2 Thomas Huth
` (2 subsequent siblings)
17 siblings, 0 replies; 24+ messages in thread
From: Thomas Huth @ 2021-12-15 7:34 UTC (permalink / raw)
To: qemu-devel; +Cc: Eric Auger, Richard Henderson, Jean-Philippe Brucker
From: Eric Auger <eric.auger@redhat.com>
Add the framework to test the virtio-iommu-pci device
and tests exercising the attach/detach, map/unmap API.
Signed-off-by: Eric Auger <eric.auger@redhat.com>
Tested-by: Jean-Philippe Brucker <jean-philippe@linaro.org>
Reviewed-by: Jean-Philippe Brucker <jean-philippe@linaro.org>
Acked-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20211127072910.1261824-5-eric.auger@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
---
tests/qtest/libqos/meson.build | 1 +
tests/qtest/libqos/virtio-iommu.c | 126 ++++++++++++
tests/qtest/libqos/virtio-iommu.h | 40 ++++
tests/qtest/meson.build | 1 +
tests/qtest/virtio-iommu-test.c | 326 ++++++++++++++++++++++++++++++
5 files changed, 494 insertions(+)
create mode 100644 tests/qtest/libqos/virtio-iommu.c
create mode 100644 tests/qtest/libqos/virtio-iommu.h
create mode 100644 tests/qtest/virtio-iommu-test.c
diff --git a/tests/qtest/libqos/meson.build b/tests/qtest/libqos/meson.build
index 4af1f04787..e988d15791 100644
--- a/tests/qtest/libqos/meson.build
+++ b/tests/qtest/libqos/meson.build
@@ -41,6 +41,7 @@ libqos_srcs = files('../libqtest.c',
'virtio-rng.c',
'virtio-scsi.c',
'virtio-serial.c',
+ 'virtio-iommu.c',
# qgraph machines:
'aarch64-xlnx-zcu102-machine.c',
diff --git a/tests/qtest/libqos/virtio-iommu.c b/tests/qtest/libqos/virtio-iommu.c
new file mode 100644
index 0000000000..18cba4ca36
--- /dev/null
+++ b/tests/qtest/libqos/virtio-iommu.c
@@ -0,0 +1,126 @@
+/*
+ * libqos driver virtio-iommu-pci framework
+ *
+ * Copyright (c) 2021 Red Hat, Inc.
+ *
+ * Authors:
+ * Eric Auger <eric.auger@redhat.com>
+ *
+ * This work is licensed under the terms of the GNU GPL, version 2 or (at your
+ * option) any later version. See the COPYING file in the top-level directory.
+ *
+ */
+
+#include "qemu/osdep.h"
+#include "libqtest.h"
+#include "qemu/module.h"
+#include "qgraph.h"
+#include "virtio-iommu.h"
+#include "hw/virtio/virtio-iommu.h"
+
+static QGuestAllocator *alloc;
+
+/* virtio-iommu-device */
+static void *qvirtio_iommu_get_driver(QVirtioIOMMU *v_iommu,
+ const char *interface)
+{
+ if (!g_strcmp0(interface, "virtio-iommu")) {
+ return v_iommu;
+ }
+ if (!g_strcmp0(interface, "virtio")) {
+ return v_iommu->vdev;
+ }
+
+ fprintf(stderr, "%s not present in virtio-iommu-device\n", interface);
+ g_assert_not_reached();
+}
+
+static void virtio_iommu_cleanup(QVirtioIOMMU *interface)
+{
+ qvirtqueue_cleanup(interface->vdev->bus, interface->vq, alloc);
+}
+
+static void virtio_iommu_setup(QVirtioIOMMU *interface)
+{
+ QVirtioDevice *vdev = interface->vdev;
+ uint64_t features;
+
+ features = qvirtio_get_features(vdev);
+ features &= ~(QVIRTIO_F_BAD_FEATURE |
+ (1ull << VIRTIO_RING_F_INDIRECT_DESC) |
+ (1ull << VIRTIO_RING_F_EVENT_IDX) |
+ (1ull << VIRTIO_IOMMU_F_BYPASS));
+ qvirtio_set_features(vdev, features);
+ interface->vq = qvirtqueue_setup(interface->vdev, alloc, 0);
+ qvirtio_set_driver_ok(interface->vdev);
+}
+
+/* virtio-iommu-pci */
+static void *qvirtio_iommu_pci_get_driver(void *object, const char *interface)
+{
+ QVirtioIOMMUPCI *v_iommu = object;
+ if (!g_strcmp0(interface, "pci-device")) {
+ return v_iommu->pci_vdev.pdev;
+ }
+ return qvirtio_iommu_get_driver(&v_iommu->iommu, interface);
+}
+
+static void qvirtio_iommu_pci_destructor(QOSGraphObject *obj)
+{
+ QVirtioIOMMUPCI *iommu_pci = (QVirtioIOMMUPCI *) obj;
+ QVirtioIOMMU *interface = &iommu_pci->iommu;
+ QOSGraphObject *pci_vobj = &iommu_pci->pci_vdev.obj;
+
+ virtio_iommu_cleanup(interface);
+ qvirtio_pci_destructor(pci_vobj);
+}
+
+static void qvirtio_iommu_pci_start_hw(QOSGraphObject *obj)
+{
+ QVirtioIOMMUPCI *iommu_pci = (QVirtioIOMMUPCI *) obj;
+ QVirtioIOMMU *interface = &iommu_pci->iommu;
+ QOSGraphObject *pci_vobj = &iommu_pci->pci_vdev.obj;
+
+ qvirtio_pci_start_hw(pci_vobj);
+ virtio_iommu_setup(interface);
+}
+
+
+static void *virtio_iommu_pci_create(void *pci_bus, QGuestAllocator *t_alloc,
+ void *addr)
+{
+ QVirtioIOMMUPCI *virtio_rpci = g_new0(QVirtioIOMMUPCI, 1);
+ QVirtioIOMMU *interface = &virtio_rpci->iommu;
+ QOSGraphObject *obj = &virtio_rpci->pci_vdev.obj;
+
+ virtio_pci_init(&virtio_rpci->pci_vdev, pci_bus, addr);
+ interface->vdev = &virtio_rpci->pci_vdev.vdev;
+ alloc = t_alloc;
+
+ obj->get_driver = qvirtio_iommu_pci_get_driver;
+ obj->start_hw = qvirtio_iommu_pci_start_hw;
+ obj->destructor = qvirtio_iommu_pci_destructor;
+
+ return obj;
+}
+
+static void virtio_iommu_register_nodes(void)
+{
+ QPCIAddress addr = {
+ .devfn = QPCI_DEVFN(4, 0),
+ };
+
+ QOSGraphEdgeOptions opts = {
+ .extra_device_opts = "addr=04.0",
+ };
+
+ /* virtio-iommu-pci */
+ add_qpci_address(&opts, &addr);
+ qos_node_create_driver("virtio-iommu-pci", virtio_iommu_pci_create);
+ qos_node_consumes("virtio-iommu-pci", "pci-bus", &opts);
+ qos_node_produces("virtio-iommu-pci", "pci-device");
+ qos_node_produces("virtio-iommu-pci", "virtio");
+ qos_node_produces("virtio-iommu-pci", "virtio-iommu");
+}
+
+libqos_init(virtio_iommu_register_nodes);
diff --git a/tests/qtest/libqos/virtio-iommu.h b/tests/qtest/libqos/virtio-iommu.h
new file mode 100644
index 0000000000..d753761958
--- /dev/null
+++ b/tests/qtest/libqos/virtio-iommu.h
@@ -0,0 +1,40 @@
+/*
+ * libqos driver virtio-iommu-pci framework
+ *
+ * Copyright (c) 2021 Red Hat, Inc.
+ *
+ * Authors:
+ * Eric Auger <eric.auger@redhat.com>
+ *
+ * This work is licensed under the terms of the GNU GPL, version 2 or (at your
+ * option) any later version. See the COPYING file in the top-level directory.
+ *
+ */
+
+#ifndef TESTS_LIBQOS_VIRTIO_IOMMU_H
+#define TESTS_LIBQOS_VIRTIO_IOMMU_H
+
+#include "qgraph.h"
+#include "virtio.h"
+#include "virtio-pci.h"
+
+typedef struct QVirtioIOMMU QVirtioIOMMU;
+typedef struct QVirtioIOMMUPCI QVirtioIOMMUPCI;
+typedef struct QVirtioIOMMUDevice QVirtioIOMMUDevice;
+
+struct QVirtioIOMMU {
+ QVirtioDevice *vdev;
+ QVirtQueue *vq;
+};
+
+struct QVirtioIOMMUPCI {
+ QVirtioPCIDevice pci_vdev;
+ QVirtioIOMMU iommu;
+};
+
+struct QVirtioIOMMUDevice {
+ QOSGraphObject obj;
+ QVirtioIOMMU iommu;
+};
+
+#endif
diff --git a/tests/qtest/meson.build b/tests/qtest/meson.build
index 9ff3eaf3d0..acc7de5067 100644
--- a/tests/qtest/meson.build
+++ b/tests/qtest/meson.build
@@ -234,6 +234,7 @@ qos_test_ss.add(
'virtio-rng-test.c',
'virtio-scsi-test.c',
'virtio-serial-test.c',
+ 'virtio-iommu-test.c',
'vmxnet3-test.c',
)
if have_virtfs
diff --git a/tests/qtest/virtio-iommu-test.c b/tests/qtest/virtio-iommu-test.c
new file mode 100644
index 0000000000..47e68388a0
--- /dev/null
+++ b/tests/qtest/virtio-iommu-test.c
@@ -0,0 +1,326 @@
+/*
+ * QTest testcase for VirtIO IOMMU
+ *
+ * Copyright (c) 2021 Red Hat, Inc.
+ *
+ * Authors:
+ * Eric Auger <eric.auger@redhat.com>
+ *
+ * This work is licensed under the terms of the GNU GPL, version 2 or (at your
+ * option) any later version. See the COPYING file in the top-level directory.
+ *
+ */
+
+#include "qemu/osdep.h"
+#include "libqtest-single.h"
+#include "qemu/module.h"
+#include "libqos/qgraph.h"
+#include "libqos/virtio-iommu.h"
+#include "hw/virtio/virtio-iommu.h"
+
+#define PCI_SLOT_HP 0x06
+#define QVIRTIO_IOMMU_TIMEOUT_US (30 * 1000 * 1000)
+
+static QGuestAllocator *alloc;
+
+static void pci_config(void *obj, void *data, QGuestAllocator *t_alloc)
+{
+ QVirtioIOMMU *v_iommu = obj;
+ QVirtioDevice *dev = v_iommu->vdev;
+ uint64_t input_range_start = qvirtio_config_readq(dev, 8);
+ uint64_t input_range_end = qvirtio_config_readq(dev, 16);
+ uint32_t domain_range_start = qvirtio_config_readl(dev, 24);
+ uint32_t domain_range_end = qvirtio_config_readl(dev, 28);
+
+ g_assert_cmpint(input_range_start, ==, 0);
+ g_assert_cmphex(input_range_end, ==, UINT64_MAX);
+ g_assert_cmpint(domain_range_start, ==, 0);
+ g_assert_cmpint(domain_range_end, ==, UINT32_MAX);
+}
+
+static int read_tail_status(struct virtio_iommu_req_tail *buffer)
+{
+ int i;
+
+ for (i = 0; i < 3; i++) {
+ g_assert_cmpint(buffer->reserved[i], ==, 0);
+ }
+ return buffer->status;
+}
+
+/**
+ * send_attach_detach - Send an attach/detach command to the device
+ * @type: VIRTIO_IOMMU_T_ATTACH/VIRTIO_IOMMU_T_DETACH
+ * @domain: domain the endpoint is attached to
+ * @ep: endpoint
+ */
+static int send_attach_detach(QTestState *qts, QVirtioIOMMU *v_iommu,
+ uint8_t type, uint32_t domain, uint32_t ep)
+{
+ QVirtioDevice *dev = v_iommu->vdev;
+ QVirtQueue *vq = v_iommu->vq;
+ uint64_t ro_addr, wr_addr;
+ uint32_t free_head;
+ struct virtio_iommu_req_attach req = {}; /* same layout as detach */
+ size_t ro_size = sizeof(req) - sizeof(struct virtio_iommu_req_tail);
+ size_t wr_size = sizeof(struct virtio_iommu_req_tail);
+ struct virtio_iommu_req_tail buffer;
+ int ret;
+
+ req.head.type = type;
+ req.domain = cpu_to_le32(domain);
+ req.endpoint = cpu_to_le32(ep);
+
+ ro_addr = guest_alloc(alloc, ro_size);
+ wr_addr = guest_alloc(alloc, wr_size);
+
+ qtest_memwrite(qts, ro_addr, &req, ro_size);
+ free_head = qvirtqueue_add(qts, vq, ro_addr, ro_size, false, true);
+ qvirtqueue_add(qts, vq, wr_addr, wr_size, true, false);
+ qvirtqueue_kick(qts, dev, vq, free_head);
+ qvirtio_wait_used_elem(qts, dev, vq, free_head, NULL,
+ QVIRTIO_IOMMU_TIMEOUT_US);
+ qtest_memread(qts, wr_addr, &buffer, wr_size);
+ ret = read_tail_status(&buffer);
+ guest_free(alloc, ro_addr);
+ guest_free(alloc, wr_addr);
+ return ret;
+}
+
+/**
+ * send_map - Send a map command to the device
+ * @domain: domain the new mapping is attached to
+ * @virt_start: iova start
+ * @virt_end: iova end
+ * @phys_start: base physical address
+ * @flags: mapping flags
+ */
+static int send_map(QTestState *qts, QVirtioIOMMU *v_iommu,
+ uint32_t domain, uint64_t virt_start, uint64_t virt_end,
+ uint64_t phys_start, uint32_t flags)
+{
+ QVirtioDevice *dev = v_iommu->vdev;
+ QVirtQueue *vq = v_iommu->vq;
+ uint64_t ro_addr, wr_addr;
+ uint32_t free_head;
+ struct virtio_iommu_req_map req;
+ size_t ro_size = sizeof(req) - sizeof(struct virtio_iommu_req_tail);
+ size_t wr_size = sizeof(struct virtio_iommu_req_tail);
+ struct virtio_iommu_req_tail buffer;
+ int ret;
+
+ req.head.type = VIRTIO_IOMMU_T_MAP;
+ req.domain = cpu_to_le32(domain);
+ req.virt_start = cpu_to_le64(virt_start);
+ req.virt_end = cpu_to_le64(virt_end);
+ req.phys_start = cpu_to_le64(phys_start);
+ req.flags = cpu_to_le32(flags);
+
+ ro_addr = guest_alloc(alloc, ro_size);
+ wr_addr = guest_alloc(alloc, wr_size);
+
+ qtest_memwrite(qts, ro_addr, &req, ro_size);
+ free_head = qvirtqueue_add(qts, vq, ro_addr, ro_size, false, true);
+ qvirtqueue_add(qts, vq, wr_addr, wr_size, true, false);
+ qvirtqueue_kick(qts, dev, vq, free_head);
+ qvirtio_wait_used_elem(qts, dev, vq, free_head, NULL,
+ QVIRTIO_IOMMU_TIMEOUT_US);
+ qtest_memread(qts, wr_addr, &buffer, wr_size);
+ ret = read_tail_status(&buffer);
+ guest_free(alloc, ro_addr);
+ guest_free(alloc, wr_addr);
+ return ret;
+}
+
+/**
+ * send_unmap - Send an unmap command to the device
+ * @domain: domain the new binding is attached to
+ * @virt_start: iova start
+ * @virt_end: iova end
+ */
+static int send_unmap(QTestState *qts, QVirtioIOMMU *v_iommu,
+ uint32_t domain, uint64_t virt_start, uint64_t virt_end)
+{
+ QVirtioDevice *dev = v_iommu->vdev;
+ QVirtQueue *vq = v_iommu->vq;
+ uint64_t ro_addr, wr_addr;
+ uint32_t free_head;
+ struct virtio_iommu_req_unmap req;
+ size_t ro_size = sizeof(req) - sizeof(struct virtio_iommu_req_tail);
+ size_t wr_size = sizeof(struct virtio_iommu_req_tail);
+ struct virtio_iommu_req_tail buffer;
+ int ret;
+
+ req.head.type = VIRTIO_IOMMU_T_UNMAP;
+ req.domain = cpu_to_le32(domain);
+ req.virt_start = cpu_to_le64(virt_start);
+ req.virt_end = cpu_to_le64(virt_end);
+
+ ro_addr = guest_alloc(alloc, ro_size);
+ wr_addr = guest_alloc(alloc, wr_size);
+
+ qtest_memwrite(qts, ro_addr, &req, ro_size);
+ free_head = qvirtqueue_add(qts, vq, ro_addr, ro_size, false, true);
+ qvirtqueue_add(qts, vq, wr_addr, wr_size, true, false);
+ qvirtqueue_kick(qts, dev, vq, free_head);
+ qvirtio_wait_used_elem(qts, dev, vq, free_head, NULL,
+ QVIRTIO_IOMMU_TIMEOUT_US);
+ qtest_memread(qts, wr_addr, &buffer, wr_size);
+ ret = read_tail_status(&buffer);
+ guest_free(alloc, ro_addr);
+ guest_free(alloc, wr_addr);
+ return ret;
+}
+
+static void test_attach_detach(void *obj, void *data, QGuestAllocator *t_alloc)
+{
+ QVirtioIOMMU *v_iommu = obj;
+ QTestState *qts = global_qtest;
+ int ret;
+
+ alloc = t_alloc;
+
+ /* type, domain, ep */
+
+ /* attach ep0 to domain 0 */
+ ret = send_attach_detach(qts, v_iommu, VIRTIO_IOMMU_T_ATTACH, 0, 0);
+ g_assert_cmpint(ret, ==, 0);
+
+ /* attach a non existing device */
+ ret = send_attach_detach(qts, v_iommu, VIRTIO_IOMMU_T_ATTACH, 0, 444);
+ g_assert_cmpint(ret, ==, VIRTIO_IOMMU_S_NOENT);
+
+ /* detach a non existing device (1) */
+ ret = send_attach_detach(qts, v_iommu, VIRTIO_IOMMU_T_DETACH, 0, 1);
+ g_assert_cmpint(ret, ==, VIRTIO_IOMMU_S_NOENT);
+
+ /* move ep0 from domain 0 to domain 1 */
+ ret = send_attach_detach(qts, v_iommu, VIRTIO_IOMMU_T_ATTACH, 1, 0);
+ g_assert_cmpint(ret, ==, 0);
+
+ /* detach ep0 from domain 0 */
+ ret = send_attach_detach(qts, v_iommu, VIRTIO_IOMMU_T_DETACH, 0, 0);
+ g_assert_cmpint(ret, ==, VIRTIO_IOMMU_S_INVAL);
+
+ /* detach ep0 from domain 1 */
+ ret = send_attach_detach(qts, v_iommu, VIRTIO_IOMMU_T_DETACH, 1, 0);
+ g_assert_cmpint(ret, ==, 0);
+
+ ret = send_attach_detach(qts, v_iommu, VIRTIO_IOMMU_T_ATTACH, 1, 0);
+ g_assert_cmpint(ret, ==, 0);
+ ret = send_map(qts, v_iommu, 1, 0x0, 0xFFF, 0xa1000,
+ VIRTIO_IOMMU_MAP_F_READ);
+ g_assert_cmpint(ret, ==, 0);
+ ret = send_map(qts, v_iommu, 1, 0x2000, 0x2FFF, 0xb1000,
+ VIRTIO_IOMMU_MAP_F_READ);
+ g_assert_cmpint(ret, ==, 0);
+ ret = send_attach_detach(qts, v_iommu, VIRTIO_IOMMU_T_DETACH, 1, 0);
+ g_assert_cmpint(ret, ==, 0);
+}
+
+/* Test map/unmap scenari documented in the spec */
+static void test_map_unmap(void *obj, void *data, QGuestAllocator *t_alloc)
+{
+ QVirtioIOMMU *v_iommu = obj;
+ QTestState *qts = global_qtest;
+ int ret;
+
+ alloc = t_alloc;
+
+ /* attach ep0 to domain 1 */
+ ret = send_attach_detach(qts, v_iommu, VIRTIO_IOMMU_T_ATTACH, 1, 0);
+ g_assert_cmpint(ret, ==, 0);
+
+ ret = send_map(qts, v_iommu, 0, 0, 0xFFF, 0xa1000, VIRTIO_IOMMU_MAP_F_READ);
+ g_assert_cmpint(ret, ==, VIRTIO_IOMMU_S_NOENT);
+
+ /* domain, virt start, virt end, phys start, flags */
+ ret = send_map(qts, v_iommu, 1, 0x0, 0xFFF, 0xa1000, VIRTIO_IOMMU_MAP_F_READ);
+ g_assert_cmpint(ret, ==, 0);
+
+ /* send a new mapping overlapping the previous one */
+ ret = send_map(qts, v_iommu, 1, 0, 0xFFFF, 0xb1000, VIRTIO_IOMMU_MAP_F_READ);
+ g_assert_cmpint(ret, ==, VIRTIO_IOMMU_S_INVAL);
+
+ ret = send_unmap(qts, v_iommu, 4, 0x10, 0xFFF);
+ g_assert_cmpint(ret, ==, VIRTIO_IOMMU_S_NOENT);
+
+ ret = send_unmap(qts, v_iommu, 1, 0x10, 0xFFF);
+ g_assert_cmpint(ret, ==, VIRTIO_IOMMU_S_RANGE);
+
+ ret = send_unmap(qts, v_iommu, 1, 0, 0x1000);
+ g_assert_cmpint(ret, ==, 0); /* unmap everything */
+
+ /* Spec example sequence */
+
+ /* 1 */
+ ret = send_unmap(qts, v_iommu, 1, 0, 4);
+ g_assert_cmpint(ret, ==, 0); /* doesn't unmap anything */
+
+ /* 2 */
+ ret = send_map(qts, v_iommu, 1, 0, 9, 0xa1000, VIRTIO_IOMMU_MAP_F_READ);
+ g_assert_cmpint(ret, ==, 0);
+ ret = send_unmap(qts, v_iommu, 1, 0, 9);
+ g_assert_cmpint(ret, ==, 0); /* unmaps [0,9] */
+
+ /* 3 */
+ ret = send_map(qts, v_iommu, 1, 0, 4, 0xb1000, VIRTIO_IOMMU_MAP_F_READ);
+ g_assert_cmpint(ret, ==, 0);
+ ret = send_map(qts, v_iommu, 1, 5, 9, 0xb2000, VIRTIO_IOMMU_MAP_F_READ);
+ g_assert_cmpint(ret, ==, 0);
+ ret = send_unmap(qts, v_iommu, 1, 0, 9);
+ g_assert_cmpint(ret, ==, 0); /* unmaps [0,4] and [5,9] */
+
+ /* 4 */
+ ret = send_map(qts, v_iommu, 1, 0, 9, 0xc1000, VIRTIO_IOMMU_MAP_F_READ);
+ g_assert_cmpint(ret, ==, 0);
+
+ ret = send_unmap(qts, v_iommu, 1, 0, 4);
+ g_assert_cmpint(ret, ==, VIRTIO_IOMMU_S_RANGE); /* doesn't unmap anything */
+
+ ret = send_unmap(qts, v_iommu, 1, 0, 10);
+ g_assert_cmpint(ret, ==, 0);
+
+ /* 5 */
+ ret = send_map(qts, v_iommu, 1, 0, 4, 0xd1000, VIRTIO_IOMMU_MAP_F_READ);
+ g_assert_cmpint(ret, ==, 0);
+ ret = send_map(qts, v_iommu, 1, 5, 9, 0xd2000, VIRTIO_IOMMU_MAP_F_READ);
+ g_assert_cmpint(ret, ==, 0);
+ ret = send_unmap(qts, v_iommu, 1, 0, 4);
+ g_assert_cmpint(ret, ==, 0); /* unmaps [0,4] */
+
+ ret = send_unmap(qts, v_iommu, 1, 5, 9);
+ g_assert_cmpint(ret, ==, 0);
+
+ /* 6 */
+ ret = send_map(qts, v_iommu, 1, 0, 4, 0xe2000, VIRTIO_IOMMU_MAP_F_READ);
+ g_assert_cmpint(ret, ==, 0);
+ ret = send_unmap(qts, v_iommu, 1, 0, 9);
+ g_assert_cmpint(ret, ==, 0); /* unmaps [0,4] */
+
+ /* 7 */
+ ret = send_map(qts, v_iommu, 1, 0, 4, 0xf2000, VIRTIO_IOMMU_MAP_F_READ);
+ g_assert_cmpint(ret, ==, 0);
+ ret = send_map(qts, v_iommu, 1, 10, 14, 0xf3000, VIRTIO_IOMMU_MAP_F_READ);
+ g_assert_cmpint(ret, ==, 0);
+ ret = send_unmap(qts, v_iommu, 1, 0, 14);
+ g_assert_cmpint(ret, ==, 0); /* unmaps [0,4] and [10,14] */
+
+ ret = send_map(qts, v_iommu, 1, 10, 14, 0xf3000, VIRTIO_IOMMU_MAP_F_READ);
+ g_assert_cmpint(ret, ==, 0);
+ ret = send_map(qts, v_iommu, 1, 0, 4, 0xf2000, VIRTIO_IOMMU_MAP_F_READ);
+ g_assert_cmpint(ret, ==, 0);
+ ret = send_unmap(qts, v_iommu, 1, 0, 4);
+ g_assert_cmpint(ret, ==, 0); /* only unmaps [0,4] */
+ ret = send_map(qts, v_iommu, 1, 10, 14, 0xf3000, VIRTIO_IOMMU_MAP_F_READ);
+ g_assert_cmpint(ret, ==, VIRTIO_IOMMU_S_INVAL); /* 10-14 still is mapped */
+}
+
+static void register_virtio_iommu_test(void)
+{
+ qos_add_test("config", "virtio-iommu", pci_config, NULL);
+ qos_add_test("attach_detach", "virtio-iommu", test_attach_detach, NULL);
+ qos_add_test("map_unmap", "virtio-iommu", test_map_unmap, NULL);
+}
+
+libqos_init(register_virtio_iommu_test);
--
2.27.0
^ permalink raw reply related [flat|nested] 24+ messages in thread
* [PULL 16/16] gitlab-ci: Test compilation on Windows with MSYS2
2021-12-15 7:33 [PULL 00/16] qtest and gitlab-CI improvements Thomas Huth
` (14 preceding siblings ...)
2021-12-15 7:34 ` [PULL 15/16] tests: qtest: Add virtio-iommu test Thomas Huth
@ 2021-12-15 7:34 ` Thomas Huth
2021-12-15 17:14 ` [PULL 00/16] qtest and gitlab-CI improvements Richard Henderson
2021-12-18 16:33 ` Philippe Mathieu-Daudé
17 siblings, 0 replies; 24+ messages in thread
From: Thomas Huth @ 2021-12-15 7:34 UTC (permalink / raw)
To: qemu-devel; +Cc: Richard Henderson, Philippe Mathieu-Daudé
Gitlab also provides runners with Windows, we can use them to
test compilation with MSYS2, in both, 64-bit and 32-bit.
However, it takes quite a long time to set up the VM, so to stay
in a reasonable time frame, we can only compile and check one
target here.
Message-Id: <20211115140623.104116-1-thuth@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Thomas Huth <thuth@redhat.com>
---
.gitlab-ci.d/qemu-project.yml | 1 +
.gitlab-ci.d/windows.yml | 98 +++++++++++++++++++++++++++++++++++
2 files changed, 99 insertions(+)
create mode 100644 .gitlab-ci.d/windows.yml
diff --git a/.gitlab-ci.d/qemu-project.yml b/.gitlab-ci.d/qemu-project.yml
index b3d79bc429..871262fe0e 100644
--- a/.gitlab-ci.d/qemu-project.yml
+++ b/.gitlab-ci.d/qemu-project.yml
@@ -11,3 +11,4 @@ include:
- local: '/.gitlab-ci.d/static_checks.yml'
- local: '/.gitlab-ci.d/custom-runners.yml'
- local: '/.gitlab-ci.d/cirrus.yml'
+ - local: '/.gitlab-ci.d/windows.yml'
diff --git a/.gitlab-ci.d/windows.yml b/.gitlab-ci.d/windows.yml
new file mode 100644
index 0000000000..309f7e7fb8
--- /dev/null
+++ b/.gitlab-ci.d/windows.yml
@@ -0,0 +1,98 @@
+.shared_msys2_builder:
+ tags:
+ - shared-windows
+ - windows
+ - windows-1809
+ cache:
+ key: "${CI_JOB_NAME}-cache"
+ paths:
+ - ${CI_PROJECT_DIR}/msys64/var/cache
+ needs: []
+ stage: build
+ timeout: 70m
+ before_script:
+ - If ( !(Test-Path -Path msys64\var\cache ) ) {
+ mkdir msys64\var\cache
+ }
+ - If ( !(Test-Path -Path msys64\var\cache\msys2.exe ) ) {
+ Invoke-WebRequest
+ "https://github.com/msys2/msys2-installer/releases/download/2021-07-25/msys2-base-x86_64-20210725.sfx.exe"
+ -outfile "msys64\var\cache\msys2.exe"
+ }
+ - msys64\var\cache\msys2.exe -y
+ - ((Get-Content -path .\msys64\etc\\post-install\\07-pacman-key.post -Raw)
+ -replace '--refresh-keys', '--version') |
+ Set-Content -Path ${CI_PROJECT_DIR}\msys64\etc\\post-install\\07-pacman-key.post
+ - .\msys64\usr\bin\bash -lc "sed -i 's/^CheckSpace/#CheckSpace/g' /etc/pacman.conf"
+ - .\msys64\usr\bin\bash -lc 'pacman --noconfirm -Syuu' # Core update
+ - .\msys64\usr\bin\bash -lc 'pacman --noconfirm -Syuu' # Normal update
+ - taskkill /F /FI "MODULES eq msys-2.0.dll"
+
+msys2-64bit:
+ extends: .shared_msys2_builder
+ script:
+ - .\msys64\usr\bin\bash -lc "pacman -Sy --noconfirm --needed
+ diffutils git grep make sed
+ mingw-w64-x86_64-capstone
+ mingw-w64-x86_64-curl
+ mingw-w64-x86_64-cyrus-sasl
+ mingw-w64-x86_64-gcc
+ mingw-w64-x86_64-glib2
+ mingw-w64-x86_64-gnutls
+ mingw-w64-x86_64-libnfs
+ mingw-w64-x86_64-libpng
+ mingw-w64-x86_64-libssh
+ mingw-w64-x86_64-libtasn1
+ mingw-w64-x86_64-libusb
+ mingw-w64-x86_64-libxml2
+ mingw-w64-x86_64-nettle
+ mingw-w64-x86_64-ninja
+ mingw-w64-x86_64-pixman
+ mingw-w64-x86_64-pkgconf
+ mingw-w64-x86_64-python
+ mingw-w64-x86_64-SDL2
+ mingw-w64-x86_64-SDL2_image
+ mingw-w64-x86_64-snappy
+ mingw-w64-x86_64-usbredir
+ mingw-w64-x86_64-zstd "
+ - $env:CHERE_INVOKING = 'yes' # Preserve the current working directory
+ - $env:MSYSTEM = 'MINGW64' # Start a 64 bit Mingw environment
+ - .\msys64\usr\bin\bash -lc './configure --target-list=x86_64-softmmu
+ --enable-capstone=system'
+ - .\msys64\usr\bin\bash -lc "sed -i '/^ROMS=/d' build/config-host.mak"
+ - .\msys64\usr\bin\bash -lc 'make -j2'
+ - .\msys64\usr\bin\bash -lc 'make check'
+
+msys2-32bit:
+ extends: .shared_msys2_builder
+ script:
+ - .\msys64\usr\bin\bash -lc "pacman -Sy --noconfirm --needed
+ diffutils git grep make sed
+ mingw-w64-i686-capstone
+ mingw-w64-i686-curl
+ mingw-w64-i686-cyrus-sasl
+ mingw-w64-i686-gcc
+ mingw-w64-i686-glib2
+ mingw-w64-i686-gnutls
+ mingw-w64-i686-gtk3
+ mingw-w64-i686-libgcrypt
+ mingw-w64-i686-libjpeg-turbo
+ mingw-w64-i686-libssh
+ mingw-w64-i686-libtasn1
+ mingw-w64-i686-libusb
+ mingw-w64-i686-libxml2
+ mingw-w64-i686-lzo2
+ mingw-w64-i686-ninja
+ mingw-w64-i686-pixman
+ mingw-w64-i686-pkgconf
+ mingw-w64-i686-python
+ mingw-w64-i686-snappy
+ mingw-w64-i686-usbredir "
+ - $env:CHERE_INVOKING = 'yes' # Preserve the current working directory
+ - $env:MSYSTEM = 'MINGW32' # Start a 32-bit MinG environment
+ - mkdir output
+ - cd output
+ - ..\msys64\usr\bin\bash -lc "../configure --target-list=ppc64-softmmu
+ --enable-capstone=system"
+ - ..\msys64\usr\bin\bash -lc 'make -j2'
+ - ..\msys64\usr\bin\bash -lc 'make check'
--
2.27.0
^ permalink raw reply related [flat|nested] 24+ messages in thread
* Re: [PULL 00/16] qtest and gitlab-CI improvements
2021-12-15 7:33 [PULL 00/16] qtest and gitlab-CI improvements Thomas Huth
` (15 preceding siblings ...)
2021-12-15 7:34 ` [PULL 16/16] gitlab-ci: Test compilation on Windows with MSYS2 Thomas Huth
@ 2021-12-15 17:14 ` Richard Henderson
2021-12-15 20:33 ` Thomas Huth
2021-12-18 16:33 ` Philippe Mathieu-Daudé
17 siblings, 1 reply; 24+ messages in thread
From: Richard Henderson @ 2021-12-15 17:14 UTC (permalink / raw)
To: Thomas Huth, qemu-devel
On 12/14/21 11:33 PM, Thomas Huth wrote:
> Hi!
>
> The following changes since commit 76b56fdfc9fa43ec6e5986aee33f108c6c6a511e:
>
> Merge tag 'block-pull-request' of https://gitlab.com/stefanha/qemu into staging (2021-12-14 12:46:18 -0800)
>
> are available in the Git repository at:
>
> https://gitlab.com/thuth/qemu.git tags/pull-request-2021-12-15
>
> for you to fetch changes up to 7876cba8fc0cab9a4c803a30f427d4b20b95a868:
>
> gitlab-ci: Test compilation on Windows with MSYS2 (2021-12-15 08:08:59 +0100)
>
> ----------------------------------------------------------------
> * Add virtio-net failover test
> * Make qtests a little bit more flexible with regards to reduced configs
> * Move libssh setup from configure to meson.build
> * Run device-crash-test in CI
> * Add jobs for NetBSD and OpenBSD to the CI
> * Test compilation with MSYS2 in the gitlab-ci, too
> * Add new virtio-iommu test
>
> ----------------------------------------------------------------
> Eric Auger (4):
> virtio-iommu: Remove set_config callback
> virtio-iommu: Fix endianness in get_config
> virtio-iommu: Fix the domain_range end
> tests: qtest: Add virtio-iommu test
>
> Laurent Vivier (4):
> qtest/libqos: add a function to initialize secondary PCI buses
> tests/qtest: add some tests for virtio-net failover
> tests/libqtest: add some virtio-net failover migration cancelling tests
> tests/libqtest: add a migration test with two couples of failover devices
>
> Thomas Huth (8):
> tests/qtest: Run the PPC 32-bit tests with the 64-bit target binary, too
> tests/qtest: Fence the tests that need xlnx-zcu102 with CONFIG_XLNX_ZYNQMP_ARM
> tests/qtest: Add a function that gets a list with available machine types
> tests/qtest: Add a function to check whether a machine is available
> Move the libssh setup from configure to meson.build
> gitlab-ci.d/buildtest: Add jobs that run the device-crash-test
> gitlab-ci: Add cirrus-ci based tests for NetBSD and OpenBSD
> gitlab-ci: Test compilation on Windows with MSYS2
>
> .gitlab-ci.d/buildtest.yml | 23 +
> .gitlab-ci.d/cirrus.yml | 35 +
> .gitlab-ci.d/cirrus/kvm-build.yml | 31 +
> .gitlab-ci.d/qemu-project.yml | 1 +
> .gitlab-ci.d/windows.yml | 98 +++
> configure | 27 -
> hw/virtio/trace-events | 3 +-
> hw/virtio/virtio-iommu.c | 42 +-
> include/hw/pci/pci_bridge.h | 8 +
> meson.build | 13 +-
> meson_options.txt | 2 +
> scripts/meson-buildoptions.sh | 3 +
> tests/qtest/boot-serial-test.c | 3 +-
> tests/qtest/cdrom-test.c | 8 +-
> tests/qtest/libqos/libqtest.h | 8 +
> tests/qtest/libqos/meson.build | 1 +
> tests/qtest/libqos/pci.c | 119 ++++
> tests/qtest/libqos/pci.h | 1 +
> tests/qtest/libqos/virtio-iommu.c | 126 ++++
> tests/qtest/libqos/virtio-iommu.h | 40 ++
> tests/qtest/libqtest.c | 79 ++-
> tests/qtest/meson.build | 9 +-
> tests/qtest/prom-env-test.c | 8 +-
> tests/qtest/virtio-iommu-test.c | 326 +++++++++
> tests/qtest/virtio-net-failover.c | 1352 +++++++++++++++++++++++++++++++++++++
> 25 files changed, 2290 insertions(+), 76 deletions(-)
> create mode 100644 .gitlab-ci.d/cirrus/kvm-build.yml
> create mode 100644 .gitlab-ci.d/windows.yml
> create mode 100644 tests/qtest/libqos/virtio-iommu.c
> create mode 100644 tests/qtest/libqos/virtio-iommu.h
> create mode 100644 tests/qtest/virtio-iommu-test.c
> create mode 100644 tests/qtest/virtio-net-failover.c
Applied, thanks.
r~
^ permalink raw reply [flat|nested] 24+ messages in thread
* Re: [PULL 00/16] qtest and gitlab-CI improvements
2021-12-15 17:14 ` [PULL 00/16] qtest and gitlab-CI improvements Richard Henderson
@ 2021-12-15 20:33 ` Thomas Huth
0 siblings, 0 replies; 24+ messages in thread
From: Thomas Huth @ 2021-12-15 20:33 UTC (permalink / raw)
To: Richard Henderson, qemu-devel
On 15/12/2021 18.14, Richard Henderson wrote:
> On 12/14/21 11:33 PM, Thomas Huth wrote:
>> Hi!
>>
>> The following changes since commit 76b56fdfc9fa43ec6e5986aee33f108c6c6a511e:
>>
>> Merge tag 'block-pull-request' of https://gitlab.com/stefanha/qemu into
>> staging (2021-12-14 12:46:18 -0800)
>>
>> are available in the Git repository at:
>>
>> https://gitlab.com/thuth/qemu.git tags/pull-request-2021-12-15
>>
>> for you to fetch changes up to 7876cba8fc0cab9a4c803a30f427d4b20b95a868:
>>
>> gitlab-ci: Test compilation on Windows with MSYS2 (2021-12-15 08:08:59
>> +0100)
>>
>> ----------------------------------------------------------------
>> * Add virtio-net failover test
>> * Make qtests a little bit more flexible with regards to reduced configs
>> * Move libssh setup from configure to meson.build
>> * Run device-crash-test in CI
>> * Add jobs for NetBSD and OpenBSD to the CI
>> * Test compilation with MSYS2 in the gitlab-ci, too
>> * Add new virtio-iommu test
>>
>> ----------------------------------------------------------------
>> Eric Auger (4):
>> virtio-iommu: Remove set_config callback
>> virtio-iommu: Fix endianness in get_config
>> virtio-iommu: Fix the domain_range end
>> tests: qtest: Add virtio-iommu test
>>
>> Laurent Vivier (4):
>> qtest/libqos: add a function to initialize secondary PCI buses
>> tests/qtest: add some tests for virtio-net failover
>> tests/libqtest: add some virtio-net failover migration cancelling
>> tests
>> tests/libqtest: add a migration test with two couples of failover
>> devices
>>
>> Thomas Huth (8):
>> tests/qtest: Run the PPC 32-bit tests with the 64-bit target
>> binary, too
>> tests/qtest: Fence the tests that need xlnx-zcu102 with
>> CONFIG_XLNX_ZYNQMP_ARM
>> tests/qtest: Add a function that gets a list with available machine
>> types
>> tests/qtest: Add a function to check whether a machine is available
>> Move the libssh setup from configure to meson.build
>> gitlab-ci.d/buildtest: Add jobs that run the device-crash-test
>> gitlab-ci: Add cirrus-ci based tests for NetBSD and OpenBSD
>> gitlab-ci: Test compilation on Windows with MSYS2
>>
>> .gitlab-ci.d/buildtest.yml | 23 +
>> .gitlab-ci.d/cirrus.yml | 35 +
>> .gitlab-ci.d/cirrus/kvm-build.yml | 31 +
>> .gitlab-ci.d/qemu-project.yml | 1 +
>> .gitlab-ci.d/windows.yml | 98 +++
>> configure | 27 -
>> hw/virtio/trace-events | 3 +-
>> hw/virtio/virtio-iommu.c | 42 +-
>> include/hw/pci/pci_bridge.h | 8 +
>> meson.build | 13 +-
>> meson_options.txt | 2 +
>> scripts/meson-buildoptions.sh | 3 +
>> tests/qtest/boot-serial-test.c | 3 +-
>> tests/qtest/cdrom-test.c | 8 +-
>> tests/qtest/libqos/libqtest.h | 8 +
>> tests/qtest/libqos/meson.build | 1 +
>> tests/qtest/libqos/pci.c | 119 ++++
>> tests/qtest/libqos/pci.h | 1 +
>> tests/qtest/libqos/virtio-iommu.c | 126 ++++
>> tests/qtest/libqos/virtio-iommu.h | 40 ++
>> tests/qtest/libqtest.c | 79 ++-
>> tests/qtest/meson.build | 9 +-
>> tests/qtest/prom-env-test.c | 8 +-
>> tests/qtest/virtio-iommu-test.c | 326 +++++++++
>> tests/qtest/virtio-net-failover.c | 1352
>> +++++++++++++++++++++++++++++++++++++
>> 25 files changed, 2290 insertions(+), 76 deletions(-)
>> create mode 100644 .gitlab-ci.d/cirrus/kvm-build.yml
>> create mode 100644 .gitlab-ci.d/windows.yml
>> create mode 100644 tests/qtest/libqos/virtio-iommu.c
>> create mode 100644 tests/qtest/libqos/virtio-iommu.h
>> create mode 100644 tests/qtest/virtio-iommu-test.c
>> create mode 100644 tests/qtest/virtio-net-failover.c
>
> Applied, thanks.
Thanks!
... hmm, looking at the latest builds, it seems like the new msys2-64bit job
timed out a couple of times after 60 minutes, e.g.:
https://gitlab.com/qemu-project/qemu/-/jobs/1889554588
And I already put a "timeout: 70m" in there, so I wonder why this wasn't
taken into account? Maybe it does not work for the Windows machines?
Let's keep an eye on this - if this keeps happening, we either got to
disable that job again or switch to another target CPU that has less code to
compile and test.
Thomas
^ permalink raw reply [flat|nested] 24+ messages in thread
* Re: [PULL 00/16] qtest and gitlab-CI improvements
2021-12-15 7:33 [PULL 00/16] qtest and gitlab-CI improvements Thomas Huth
` (16 preceding siblings ...)
2021-12-15 17:14 ` [PULL 00/16] qtest and gitlab-CI improvements Richard Henderson
@ 2021-12-18 16:33 ` Philippe Mathieu-Daudé
2021-12-20 6:52 ` Thomas Huth
17 siblings, 1 reply; 24+ messages in thread
From: Philippe Mathieu-Daudé @ 2021-12-18 16:33 UTC (permalink / raw)
To: Thomas Huth, qemu-devel, Laurent Vivier; +Cc: Richard Henderson
Hi,
On 12/15/21 08:33, Thomas Huth wrote:
> ----------------------------------------------------------------
> * Add virtio-net failover test
> * Make qtests a little bit more flexible with regards to reduced configs
> * Move libssh setup from configure to meson.build
> * Run device-crash-test in CI
> * Add jobs for NetBSD and OpenBSD to the CI
> * Test compilation with MSYS2 in the gitlab-ci, too
> * Add new virtio-iommu test
>
> ----------------------------------------------------------------
> Laurent Vivier (4):
> qtest/libqos: add a function to initialize secondary PCI buses
> tests/qtest: add some tests for virtio-net failover
> tests/libqtest: add some virtio-net failover migration cancelling tests
> tests/libqtest: add a migration test with two couples of failover devices
On my ASan build directory I'm sometime getting:
Running test qtest-i386/virtio-net-failover
(process:1558675): GLib-CRITICAL **: 16:19:12.556: g_rand_int: assertion
'rand != NULL' failed
From config.log:
# Configured with: '../configure' '--enable-trace-backends=log'
'--cc=clang' '--cxx=clang++' '--extra-cflags=-ggdb' '--enable-debug'
'--enable-sanitizers' '--target-list=i386-softmmu' '--disable-docs'
'--disable-tools'
^ permalink raw reply [flat|nested] 24+ messages in thread
* Re: [PULL 00/16] qtest and gitlab-CI improvements
2021-12-18 16:33 ` Philippe Mathieu-Daudé
@ 2021-12-20 6:52 ` Thomas Huth
2021-12-20 9:24 ` Philippe Mathieu-Daudé
0 siblings, 1 reply; 24+ messages in thread
From: Thomas Huth @ 2021-12-20 6:52 UTC (permalink / raw)
To: Philippe Mathieu-Daudé, qemu-devel, Laurent Vivier; +Cc: Richard Henderson
On 18/12/2021 17.33, Philippe Mathieu-Daudé wrote:
> Hi,
>
> On 12/15/21 08:33, Thomas Huth wrote:
>
>> ----------------------------------------------------------------
>> * Add virtio-net failover test
>> * Make qtests a little bit more flexible with regards to reduced configs
>> * Move libssh setup from configure to meson.build
>> * Run device-crash-test in CI
>> * Add jobs for NetBSD and OpenBSD to the CI
>> * Test compilation with MSYS2 in the gitlab-ci, too
>> * Add new virtio-iommu test
>>
>> ----------------------------------------------------------------
>
>> Laurent Vivier (4):
>> qtest/libqos: add a function to initialize secondary PCI buses
>> tests/qtest: add some tests for virtio-net failover
>> tests/libqtest: add some virtio-net failover migration cancelling tests
>> tests/libqtest: add a migration test with two couples of failover devices
>
> On my ASan build directory I'm sometime getting:
>
> Running test qtest-i386/virtio-net-failover
> (process:1558675): GLib-CRITICAL **: 16:19:12.556: g_rand_int: assertion
> 'rand != NULL' failed
Weird, since the test is not using that function? Could you get a backtrace?
Thomas
^ permalink raw reply [flat|nested] 24+ messages in thread
* Re: [PULL 00/16] qtest and gitlab-CI improvements
2021-12-20 6:52 ` Thomas Huth
@ 2021-12-20 9:24 ` Philippe Mathieu-Daudé
2021-12-20 9:53 ` Thomas Huth
0 siblings, 1 reply; 24+ messages in thread
From: Philippe Mathieu-Daudé @ 2021-12-20 9:24 UTC (permalink / raw)
To: Thomas Huth, qemu-devel, Laurent Vivier
Cc: Alexander Bulekov, Richard Henderson, Paolo Bonzini
+Alex & Paolo
On 12/20/21 07:52, Thomas Huth wrote:
> On 18/12/2021 17.33, Philippe Mathieu-Daudé wrote:
>> Hi,
>>
>> On 12/15/21 08:33, Thomas Huth wrote:
>>
>>> ----------------------------------------------------------------
>>> * Add virtio-net failover test
>>> * Make qtests a little bit more flexible with regards to reduced configs
>>> * Move libssh setup from configure to meson.build
>>> * Run device-crash-test in CI
>>> * Add jobs for NetBSD and OpenBSD to the CI
>>> * Test compilation with MSYS2 in the gitlab-ci, too
>>> * Add new virtio-iommu test
>>>
>>> ----------------------------------------------------------------
>>
>>> Laurent Vivier (4):
>>> qtest/libqos: add a function to initialize secondary PCI buses
>>> tests/qtest: add some tests for virtio-net failover
>>> tests/libqtest: add some virtio-net failover migration
>>> cancelling tests
>>> tests/libqtest: add a migration test with two couples of
>>> failover devices
>>
>> On my ASan build directory I'm sometime getting:
>>
>> Running test qtest-i386/virtio-net-failover
>> (process:1558675): GLib-CRITICAL **: 16:19:12.556: g_rand_int: assertion
>> 'rand != NULL' failed
>
> Weird, since the test is not using that function?
Well it calls g_test_rand_int(), which calls it:
https://github.com/GNOME/glib/blob/main/glib/gtestutils.c#L1800
> Could you get a
> backtrace?
I'd like to, but for some reason when using ASan I don't get much
(and it only happens with ASan) so I suppose it is something specific
to ASan + rand.
^ permalink raw reply [flat|nested] 24+ messages in thread
* Re: [PULL 00/16] qtest and gitlab-CI improvements
2021-12-20 9:24 ` Philippe Mathieu-Daudé
@ 2021-12-20 9:53 ` Thomas Huth
2021-12-20 13:11 ` Philippe Mathieu-Daudé
0 siblings, 1 reply; 24+ messages in thread
From: Thomas Huth @ 2021-12-20 9:53 UTC (permalink / raw)
To: Philippe Mathieu-Daudé, qemu-devel, Laurent Vivier
Cc: Alexander Bulekov, Richard Henderson, Paolo Bonzini
On 20/12/2021 10.24, Philippe Mathieu-Daudé wrote:
> +Alex & Paolo
>
> On 12/20/21 07:52, Thomas Huth wrote:
>> On 18/12/2021 17.33, Philippe Mathieu-Daudé wrote:
>>> Hi,
>>>
>>> On 12/15/21 08:33, Thomas Huth wrote:
>>>
>>>> ----------------------------------------------------------------
>>>> * Add virtio-net failover test
>>>> * Make qtests a little bit more flexible with regards to reduced configs
>>>> * Move libssh setup from configure to meson.build
>>>> * Run device-crash-test in CI
>>>> * Add jobs for NetBSD and OpenBSD to the CI
>>>> * Test compilation with MSYS2 in the gitlab-ci, too
>>>> * Add new virtio-iommu test
>>>>
>>>> ----------------------------------------------------------------
>>>
>>>> Laurent Vivier (4):
>>>> qtest/libqos: add a function to initialize secondary PCI buses
>>>> tests/qtest: add some tests for virtio-net failover
>>>> tests/libqtest: add some virtio-net failover migration
>>>> cancelling tests
>>>> tests/libqtest: add a migration test with two couples of
>>>> failover devices
>>>
>>> On my ASan build directory I'm sometime getting:
>>>
>>> Running test qtest-i386/virtio-net-failover
>>> (process:1558675): GLib-CRITICAL **: 16:19:12.556: g_rand_int: assertion
>>> 'rand != NULL' failed
>>
>> Weird, since the test is not using that function?
>
> Well it calls g_test_rand_int(), which calls it:
> https://github.com/GNOME/glib/blob/main/glib/gtestutils.c#L1800
Ah, right. I think the problem is that g_test_rand_int() must not be called
before g_test_init().
But actually, I think in this case we even don't want to use
g_test_rand_int() since it's about generating a true random temporary file
name, not a random number for a test case that could be influenced with the
"--seed" CLI option.
So I think using g_random_int() might be the better choice instead?
Thomas
^ permalink raw reply [flat|nested] 24+ messages in thread
* Re: [PULL 00/16] qtest and gitlab-CI improvements
2021-12-20 9:53 ` Thomas Huth
@ 2021-12-20 13:11 ` Philippe Mathieu-Daudé
0 siblings, 0 replies; 24+ messages in thread
From: Philippe Mathieu-Daudé @ 2021-12-20 13:11 UTC (permalink / raw)
To: Thomas Huth, qemu-devel, Laurent Vivier
Cc: Alexander Bulekov, Richard Henderson, Paolo Bonzini
On 12/20/21 10:53, Thomas Huth wrote:
> On 20/12/2021 10.24, Philippe Mathieu-Daudé wrote:
>> +Alex & Paolo
>>
>> On 12/20/21 07:52, Thomas Huth wrote:
>>> On 18/12/2021 17.33, Philippe Mathieu-Daudé wrote:
>>>> Hi,
>>>>
>>>> On 12/15/21 08:33, Thomas Huth wrote:
>>>>
>>>>> ----------------------------------------------------------------
>>>>> * Add virtio-net failover test
>>>>> * Make qtests a little bit more flexible with regards to reduced
>>>>> configs
>>>>> * Move libssh setup from configure to meson.build
>>>>> * Run device-crash-test in CI
>>>>> * Add jobs for NetBSD and OpenBSD to the CI
>>>>> * Test compilation with MSYS2 in the gitlab-ci, too
>>>>> * Add new virtio-iommu test
>>>>>
>>>>> ----------------------------------------------------------------
>>>>
>>>>> Laurent Vivier (4):
>>>>> qtest/libqos: add a function to initialize secondary PCI buses
>>>>> tests/qtest: add some tests for virtio-net failover
>>>>> tests/libqtest: add some virtio-net failover migration
>>>>> cancelling tests
>>>>> tests/libqtest: add a migration test with two couples of
>>>>> failover devices
>>>>
>>>> On my ASan build directory I'm sometime getting:
>>>>
>>>> Running test qtest-i386/virtio-net-failover
>>>> (process:1558675): GLib-CRITICAL **: 16:19:12.556: g_rand_int:
>>>> assertion
>>>> 'rand != NULL' failed
>>>
>>> Weird, since the test is not using that function?
>>
>> Well it calls g_test_rand_int(), which calls it:
>> https://github.com/GNOME/glib/blob/main/glib/gtestutils.c#L1800
>
> Ah, right. I think the problem is that g_test_rand_int() must not be
> called before g_test_init().
>
> But actually, I think in this case we even don't want to use
> g_test_rand_int() since it's about generating a true random temporary
> file name, not a random number for a test case that could be influenced
> with the "--seed" CLI option.
> So I think using g_random_int() might be the better choice instead?
I think you are right.
^ permalink raw reply [flat|nested] 24+ messages in thread
end of thread, other threads:[~2021-12-20 18:49 UTC | newest]
Thread overview: 24+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2021-12-15 7:33 [PULL 00/16] qtest and gitlab-CI improvements Thomas Huth
2021-12-15 7:33 ` [PULL 01/16] qtest/libqos: add a function to initialize secondary PCI buses Thomas Huth
2021-12-15 7:33 ` [PULL 02/16] tests/qtest: add some tests for virtio-net failover Thomas Huth
2021-12-15 7:33 ` [PULL 03/16] tests/libqtest: add some virtio-net failover migration cancelling tests Thomas Huth
2021-12-15 7:33 ` [PULL 04/16] tests/libqtest: add a migration test with two couples of failover devices Thomas Huth
2021-12-15 7:33 ` [PULL 05/16] tests/qtest: Run the PPC 32-bit tests with the 64-bit target binary, too Thomas Huth
2021-12-15 7:33 ` [PULL 06/16] tests/qtest: Fence the tests that need xlnx-zcu102 with CONFIG_XLNX_ZYNQMP_ARM Thomas Huth
2021-12-15 7:33 ` [PULL 07/16] tests/qtest: Add a function that gets a list with available machine types Thomas Huth
2021-12-15 7:33 ` [PULL 08/16] tests/qtest: Add a function to check whether a machine is available Thomas Huth
2021-12-15 7:33 ` [PULL 09/16] Move the libssh setup from configure to meson.build Thomas Huth
2021-12-15 7:33 ` [PULL 10/16] gitlab-ci.d/buildtest: Add jobs that run the device-crash-test Thomas Huth
2021-12-15 7:33 ` [PULL 11/16] gitlab-ci: Add cirrus-ci based tests for NetBSD and OpenBSD Thomas Huth
2021-12-15 7:33 ` [PULL 12/16] virtio-iommu: Remove set_config callback Thomas Huth
2021-12-15 7:33 ` [PULL 13/16] virtio-iommu: Fix endianness in get_config Thomas Huth
2021-12-15 7:34 ` [PULL 14/16] virtio-iommu: Fix the domain_range end Thomas Huth
2021-12-15 7:34 ` [PULL 15/16] tests: qtest: Add virtio-iommu test Thomas Huth
2021-12-15 7:34 ` [PULL 16/16] gitlab-ci: Test compilation on Windows with MSYS2 Thomas Huth
2021-12-15 17:14 ` [PULL 00/16] qtest and gitlab-CI improvements Richard Henderson
2021-12-15 20:33 ` Thomas Huth
2021-12-18 16:33 ` Philippe Mathieu-Daudé
2021-12-20 6:52 ` Thomas Huth
2021-12-20 9:24 ` Philippe Mathieu-Daudé
2021-12-20 9:53 ` Thomas Huth
2021-12-20 13:11 ` Philippe Mathieu-Daudé
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.