* [PATCH v4] mmc-utils: Add eMMC erase command support
@ 2021-05-06 19:10 oracleks043021
2021-05-07 6:36 ` Avri Altman
2021-05-11 10:57 ` Ulf Hansson
0 siblings, 2 replies; 5+ messages in thread
From: oracleks043021 @ 2021-05-06 19:10 UTC (permalink / raw)
To: Ulf Hansson, linux-mmc
Cc: linux-kernel, Kimito Sakata, Bean Huo, Kenneth Gibbons, Avri Altman
From: Kimito Sakata <kimito.sakata@oracle.com>
we have been using this erase feature for a while, but it is
still not merged into the upstream mmc-utils. Especially, for
the customer, every time when they update the mmc-utils, they
should re-install this patch again, let's try to make this
erase command upstreamed in the mmc-utils.
We need to send 3 MMC commands and it is important that they
stay in sequence. Therefore we are using MMC_IOC_MULTI_CMD.
Co-developed-by: Bean Huo <beanhuo@micron.com>
Signed-off-by: Bean Huo <beanhuo@micron.com>
Signed-off-by: Kimito Sakata <kimito.sakata@oracle.com>
Reviewed-by: Kenneth Gibbons <kenny.gibbons@oracle.com>
Reviewed-by: Avri Altman <avri.altman@wdc.com>
Changelog:
v3--v4:
1. Replace unused pointer var with NULL.
2. Added msg if ERASE_GROUP_DEF enabled for HC.
v2--v3:
1. Remove redundant ifndef
V1--V2:
1. refactor Kimito's original patch
2. change to use MMC_IOC_MULTI_CMD
3. add checkup if eMMC devie supports secure erase/trim
---
mmc.c | 8 +++
mmc.h | 13 ++++-
mmc_cmds.c | 144 +++++++++++++++++++++++++++++++++++++++++++++++++++++
mmc_cmds.h | 1 +
4 files changed, 165 insertions(+), 1 deletion(-)
diff --git a/mmc.c b/mmc.c
index f3d724b..eb2638b 100644
--- a/mmc.c
+++ b/mmc.c
@@ -229,6 +229,14 @@ static struct Command commands[] = {
"Run Field Firmware Update with <image name> on <device>.\n",
NULL
},
+ { do_erase, -4,
+ "erase", "<type> " "<start address> " "<end address> " "<device>\n"
+ "Send Erase CMD38 with specific argument to the <device>\n\n"
+ "NOTE!: This will delete all user data in the specified region of the device\n"
+ "<type> must be: legacy | discard | secure-erase | "
+ "secure-trim1 | secure-trim2 | trim \n",
+ NULL
+ },
{ 0, 0, 0, 0 }
};
diff --git a/mmc.h b/mmc.h
index 5754a9d..e9766d7 100644
--- a/mmc.h
+++ b/mmc.h
@@ -35,7 +35,15 @@
#define MMC_SET_WRITE_PROT 28 /* ac [31:0] data addr R1b */
#define MMC_CLEAR_WRITE_PROT 29 /* ac [31:0] data addr R1b */
#define MMC_SEND_WRITE_PROT_TYPE 31 /* ac [31:0] data addr R1 */
-
+#define MMC_ERASE_GROUP_START 35 /* ac [31:0] data addr R1 */
+#define MMC_ERASE_GROUP_END 36 /* ac [31:0] data addr R1 */
+#define MMC_ERASE 38 /* ac [31] Secure request
+ [30:16] set to 0
+ [15] Force Garbage Collect request
+ [14:2] set to 0
+ [1] Discard Enable
+ [0] Identify Write Blocks for
+ Erase (or TRIM Enable) R1b */
/*
* EXT_CSD fields
*/
@@ -62,6 +70,7 @@
#define EXT_CSD_CACHE_SIZE_2 251
#define EXT_CSD_CACHE_SIZE_1 250
#define EXT_CSD_CACHE_SIZE_0 249
+#define EXT_CSD_SEC_FEATURE_SUPPORT 231
#define EXT_CSD_BOOT_INFO 228 /* R/W */
#define EXT_CSD_HC_ERASE_GRP_SIZE 224
#define EXT_CSD_HC_WP_GRP_SIZE 221
@@ -190,6 +199,8 @@
#define EXT_CSD_REV_V4_2 2
#define EXT_CSD_REV_V4_1 1
#define EXT_CSD_REV_V4_0 0
+#define EXT_CSD_SEC_GB_CL_EN (1<<4)
+#define EXT_CSD_SEC_ER_EN (1<<0)
/* From kernel linux/mmc/core.h */
diff --git a/mmc_cmds.c b/mmc_cmds.c
index 6c24cea..afa85b7 100644
--- a/mmc_cmds.c
+++ b/mmc_cmds.c
@@ -2514,6 +2514,150 @@ int do_cache_dis(int nargs, char **argv)
return do_cache_ctrl(0, nargs, argv);
}
+static int erase(int dev_fd, __u32 argin, __u32 start, __u32 end)
+{
+ int ret = 0;
+ struct mmc_ioc_multi_cmd *multi_cmd;
+ __u8 ext_csd[512];
+
+
+ ret = read_extcsd(dev_fd, ext_csd);
+ if (ret) {
+ fprintf(stderr, "Could not read EXT_CSD\n");
+ exit(1);
+ }
+ if (ext_csd[EXT_CSD_ERASE_GROUP_DEF] & 0x01) {
+ fprintf(stderr, "High Capacity Erase Unit Size=%d bytes\n" \
+ "High Capacity Erase Timeout=%d ms\n" \
+ "High Capacity Write Protect Group Size=%d bytes\n",
+ ext_csd[224]*0x80000,
+ ext_csd[223]*300,
+ ext_csd[221]*ext_csd[224]*0x80000);
+ }
+
+ multi_cmd = calloc(1, sizeof(struct mmc_ioc_multi_cmd) +
+ 3 * sizeof(struct mmc_ioc_cmd));
+ if (!multi_cmd) {
+ perror("Failed to allocate memory");
+ return -ENOMEM;
+ }
+
+ multi_cmd->num_of_cmds = 3;
+ /* Set erase start address */
+ multi_cmd->cmds[0].opcode = MMC_ERASE_GROUP_START;
+ multi_cmd->cmds[0].arg = start;
+ multi_cmd->cmds[0].flags = MMC_RSP_SPI_R1 | MMC_RSP_R1 | MMC_CMD_AC;
+ multi_cmd->cmds[0].write_flag = 1;
+
+ /* Set erase end address */
+ multi_cmd->cmds[1].opcode = MMC_ERASE_GROUP_END;
+ multi_cmd->cmds[1].arg = end;
+ multi_cmd->cmds[1].flags = MMC_RSP_SPI_R1 | MMC_RSP_R1 | MMC_CMD_AC;
+ multi_cmd->cmds[1].write_flag = 1;
+
+ /* Send Erase Command */
+ multi_cmd->cmds[2].opcode = MMC_ERASE;
+ multi_cmd->cmds[2].arg = argin;
+ multi_cmd->cmds[2].cmd_timeout_ms = 300*255*255;
+ multi_cmd->cmds[2].flags = MMC_RSP_SPI_R1B | MMC_RSP_R1B | MMC_CMD_AC;
+ multi_cmd->cmds[2].write_flag = 1;
+
+ /* send erase cmd with multi-cmd */
+ ret = ioctl(dev_fd, MMC_IOC_MULTI_CMD, multi_cmd);
+ if (ret)
+ perror("Erase multi-cmd ioctl");
+
+ free(multi_cmd);
+ return ret;
+}
+
+int do_erase(int nargs, char **argv)
+{
+ int dev_fd, ret;
+ char *print_str;
+ __u8 ext_csd[512], checkup_mask = 0;
+ __u32 arg, start, end;
+
+ if (nargs != 5) {
+ fprintf(stderr, "Usage: erase <type> <start addr> <end addr> </path/to/mmcblkX>\n");
+ exit(1);
+ }
+
+ if (strstr(argv[2], "0x") || strstr(argv[2], "0X"))
+ start = strtol(argv[2], NULL, 16);
+ else
+ start = strtol(argv[2], NULL, 10);
+
+ if (strstr(argv[3], "0x") || strstr(argv[3], "0X"))
+ end = strtol(argv[3], NULL, 16);
+ else
+ end = strtol(argv[3], NULL, 10);
+
+ if (end < start) {
+ fprintf(stderr, "erase start [0x%08x] > erase end [0x%08x]\n",
+ start, end);
+ exit(1);
+ }
+
+ if (strcmp(argv[1], "legacy") == 0) {
+ arg = 0x00000000;
+ print_str = "Legacy Erase";
+ } else if (strcmp(argv[1], "discard") == 0) {
+ arg = 0x00000003;
+ print_str = "Discard";
+ } else if (strcmp(argv[1], "secure-erase") == 0) {
+ print_str = "Secure Erase";
+ checkup_mask = EXT_CSD_SEC_ER_EN;
+ arg = 0x80000000;
+ } else if (strcmp(argv[1], "secure-trim1") == 0) {
+ print_str = "Secure Trim Step 1";
+ checkup_mask = EXT_CSD_SEC_ER_EN | EXT_CSD_SEC_GB_CL_EN;
+ arg = 0x80000001;
+ } else if (strcmp(argv[1], "secure-trim2") == 0) {
+ print_str = "Secure Trim Step 2";
+ checkup_mask = EXT_CSD_SEC_ER_EN | EXT_CSD_SEC_GB_CL_EN;
+ arg = 0x80008000;
+ } else if (strcmp(argv[1], "trim") == 0) {
+ print_str = "Trim";
+ checkup_mask = EXT_CSD_SEC_GB_CL_EN;
+ arg = 0x00000001;
+ } else {
+ fprintf(stderr, "Unknown erase type: %s\n", argv[1]);
+ exit(1);
+ }
+
+ dev_fd = open(argv[4], O_RDWR);
+ if (dev_fd < 0) {
+ perror(argv[4]);
+ exit(1);
+ }
+
+ if (checkup_mask) {
+ ret = read_extcsd(dev_fd, ext_csd);
+ if (ret) {
+ fprintf(stderr, "Could not read EXT_CSD from %s\n",
+ argv[4]);
+ goto out;
+ }
+ if ((checkup_mask & ext_csd[EXT_CSD_SEC_FEATURE_SUPPORT]) !=
+ checkup_mask) {
+ fprintf(stderr, "%s is not supported in %s\n",
+ print_str, argv[4]);
+ ret = -ENOTSUP;
+ goto out;
+ }
+
+ }
+ printf("Executing %s from 0x%08x to 0x%08x\n", print_str, start, end);
+
+ ret = erase(dev_fd, arg, start, end);
+out:
+ printf(" %s %s!\n\n", print_str, ret ? "Failed" : "Succeed");
+ close(dev_fd);
+ return ret;
+}
+
+
int do_ffu(int nargs, char **argv)
{
#ifndef MMC_IOC_MULTI_CMD
diff --git a/mmc_cmds.h b/mmc_cmds.h
index 9d3246c..8331ab2 100644
--- a/mmc_cmds.h
+++ b/mmc_cmds.h
@@ -45,3 +45,4 @@ int do_ffu(int nargs, char **argv);
int do_read_scr(int argc, char **argv);
int do_read_cid(int argc, char **argv);
int do_read_csd(int argc, char **argv);
+int do_erase(int nargs, char **argv);
--
2.31.1
^ permalink raw reply related [flat|nested] 5+ messages in thread
* RE: [PATCH v4] mmc-utils: Add eMMC erase command support
2021-05-06 19:10 [PATCH v4] mmc-utils: Add eMMC erase command support oracleks043021
@ 2021-05-07 6:36 ` Avri Altman
2021-05-07 15:18 ` [External] : " kimito.sakata
2021-05-11 10:57 ` Ulf Hansson
1 sibling, 1 reply; 5+ messages in thread
From: Avri Altman @ 2021-05-07 6:36 UTC (permalink / raw)
To: oracleks043021, Ulf Hansson, linux-mmc
Cc: linux-kernel, Kimito Sakata, Bean Huo, Kenneth Gibbons
>
> From: Kimito Sakata <kimito.sakata@oracle.com>
>
> we have been using this erase feature for a while, but it is
> still not merged into the upstream mmc-utils. Especially, for
> the customer, every time when they update the mmc-utils, they
> should re-install this patch again, let's try to make this
> erase command upstreamed in the mmc-utils.
>
> We need to send 3 MMC commands and it is important that they
> stay in sequence. Therefore we are using MMC_IOC_MULTI_CMD.
>
> Co-developed-by: Bean Huo <beanhuo@micron.com>
> Signed-off-by: Bean Huo <beanhuo@micron.com>
> Signed-off-by: Kimito Sakata <kimito.sakata@oracle.com>
> Reviewed-by: Kenneth Gibbons <kenny.gibbons@oracle.com>
> Reviewed-by: Avri Altman <avri.altman@wdc.com>
This looks good to me.
Thanks,
Avri
>
> Changelog:
> v3--v4:
> 1. Replace unused pointer var with NULL.
> 2. Added msg if ERASE_GROUP_DEF enabled for HC.
> v2--v3:
> 1. Remove redundant ifndef
>
> V1--V2:
> 1. refactor Kimito's original patch
> 2. change to use MMC_IOC_MULTI_CMD
> 3. add checkup if eMMC devie supports secure erase/trim
> ---
> mmc.c | 8 +++
> mmc.h | 13 ++++-
> mmc_cmds.c | 144
> +++++++++++++++++++++++++++++++++++++++++++++++++++++
> mmc_cmds.h | 1 +
> 4 files changed, 165 insertions(+), 1 deletion(-)
>
> diff --git a/mmc.c b/mmc.c
> index f3d724b..eb2638b 100644
> --- a/mmc.c
> +++ b/mmc.c
> @@ -229,6 +229,14 @@ static struct Command commands[] = {
> "Run Field Firmware Update with <image name> on <device>.\n",
> NULL
> },
> + { do_erase, -4,
> + "erase", "<type> " "<start address> " "<end address> " "<device>\n"
> + "Send Erase CMD38 with specific argument to the <device>\n\n"
> + "NOTE!: This will delete all user data in the specified region of the
> device\n"
> + "<type> must be: legacy | discard | secure-erase | "
> + "secure-trim1 | secure-trim2 | trim \n",
> + NULL
> + },
> { 0, 0, 0, 0 }
> };
>
> diff --git a/mmc.h b/mmc.h
> index 5754a9d..e9766d7 100644
> --- a/mmc.h
> +++ b/mmc.h
> @@ -35,7 +35,15 @@
> #define MMC_SET_WRITE_PROT 28 /* ac [31:0] data addr R1b */
> #define MMC_CLEAR_WRITE_PROT 29 /* ac [31:0] data addr R1b */
> #define MMC_SEND_WRITE_PROT_TYPE 31 /* ac [31:0] data addr R1 */
> -
> +#define MMC_ERASE_GROUP_START 35 /* ac [31:0] data addr R1 */
> +#define MMC_ERASE_GROUP_END 36 /* ac [31:0] data addr R1 */
> +#define MMC_ERASE 38 /* ac [31] Secure request
> + [30:16] set to 0
> + [15] Force Garbage Collect request
> + [14:2] set to 0
> + [1] Discard Enable
> + [0] Identify Write Blocks for
> + Erase (or TRIM Enable) R1b */
> /*
> * EXT_CSD fields
> */
> @@ -62,6 +70,7 @@
> #define EXT_CSD_CACHE_SIZE_2 251
> #define EXT_CSD_CACHE_SIZE_1 250
> #define EXT_CSD_CACHE_SIZE_0 249
> +#define EXT_CSD_SEC_FEATURE_SUPPORT 231
> #define EXT_CSD_BOOT_INFO 228 /* R/W */
> #define EXT_CSD_HC_ERASE_GRP_SIZE 224
> #define EXT_CSD_HC_WP_GRP_SIZE 221
> @@ -190,6 +199,8 @@
> #define EXT_CSD_REV_V4_2 2
> #define EXT_CSD_REV_V4_1 1
> #define EXT_CSD_REV_V4_0 0
> +#define EXT_CSD_SEC_GB_CL_EN (1<<4)
> +#define EXT_CSD_SEC_ER_EN (1<<0)
>
>
> /* From kernel linux/mmc/core.h */
> diff --git a/mmc_cmds.c b/mmc_cmds.c
> index 6c24cea..afa85b7 100644
> --- a/mmc_cmds.c
> +++ b/mmc_cmds.c
> @@ -2514,6 +2514,150 @@ int do_cache_dis(int nargs, char **argv)
> return do_cache_ctrl(0, nargs, argv);
> }
>
> +static int erase(int dev_fd, __u32 argin, __u32 start, __u32 end)
> +{
> + int ret = 0;
> + struct mmc_ioc_multi_cmd *multi_cmd;
> + __u8 ext_csd[512];
> +
> +
> + ret = read_extcsd(dev_fd, ext_csd);
> + if (ret) {
> + fprintf(stderr, "Could not read EXT_CSD\n");
> + exit(1);
> + }
> + if (ext_csd[EXT_CSD_ERASE_GROUP_DEF] & 0x01) {
> + fprintf(stderr, "High Capacity Erase Unit Size=%d bytes\n" \
> + "High Capacity Erase Timeout=%d ms\n" \
> + "High Capacity Write Protect Group Size=%d bytes\n",
> + ext_csd[224]*0x80000,
> + ext_csd[223]*300,
> + ext_csd[221]*ext_csd[224]*0x80000);
> + }
> +
> + multi_cmd = calloc(1, sizeof(struct mmc_ioc_multi_cmd) +
> + 3 * sizeof(struct mmc_ioc_cmd));
> + if (!multi_cmd) {
> + perror("Failed to allocate memory");
> + return -ENOMEM;
> + }
> +
> + multi_cmd->num_of_cmds = 3;
> + /* Set erase start address */
> + multi_cmd->cmds[0].opcode = MMC_ERASE_GROUP_START;
> + multi_cmd->cmds[0].arg = start;
> + multi_cmd->cmds[0].flags = MMC_RSP_SPI_R1 | MMC_RSP_R1 |
> MMC_CMD_AC;
> + multi_cmd->cmds[0].write_flag = 1;
> +
> + /* Set erase end address */
> + multi_cmd->cmds[1].opcode = MMC_ERASE_GROUP_END;
> + multi_cmd->cmds[1].arg = end;
> + multi_cmd->cmds[1].flags = MMC_RSP_SPI_R1 | MMC_RSP_R1 |
> MMC_CMD_AC;
> + multi_cmd->cmds[1].write_flag = 1;
> +
> + /* Send Erase Command */
> + multi_cmd->cmds[2].opcode = MMC_ERASE;
> + multi_cmd->cmds[2].arg = argin;
> + multi_cmd->cmds[2].cmd_timeout_ms = 300*255*255;
> + multi_cmd->cmds[2].flags = MMC_RSP_SPI_R1B | MMC_RSP_R1B |
> MMC_CMD_AC;
> + multi_cmd->cmds[2].write_flag = 1;
> +
> + /* send erase cmd with multi-cmd */
> + ret = ioctl(dev_fd, MMC_IOC_MULTI_CMD, multi_cmd);
> + if (ret)
> + perror("Erase multi-cmd ioctl");
> +
> + free(multi_cmd);
> + return ret;
> +}
> +
> +int do_erase(int nargs, char **argv)
> +{
> + int dev_fd, ret;
> + char *print_str;
> + __u8 ext_csd[512], checkup_mask = 0;
> + __u32 arg, start, end;
> +
> + if (nargs != 5) {
> + fprintf(stderr, "Usage: erase <type> <start addr> <end addr>
> </path/to/mmcblkX>\n");
> + exit(1);
> + }
> +
> + if (strstr(argv[2], "0x") || strstr(argv[2], "0X"))
> + start = strtol(argv[2], NULL, 16);
> + else
> + start = strtol(argv[2], NULL, 10);
> +
> + if (strstr(argv[3], "0x") || strstr(argv[3], "0X"))
> + end = strtol(argv[3], NULL, 16);
> + else
> + end = strtol(argv[3], NULL, 10);
> +
> + if (end < start) {
> + fprintf(stderr, "erase start [0x%08x] > erase end [0x%08x]\n",
> + start, end);
> + exit(1);
> + }
> +
> + if (strcmp(argv[1], "legacy") == 0) {
> + arg = 0x00000000;
> + print_str = "Legacy Erase";
> + } else if (strcmp(argv[1], "discard") == 0) {
> + arg = 0x00000003;
> + print_str = "Discard";
> + } else if (strcmp(argv[1], "secure-erase") == 0) {
> + print_str = "Secure Erase";
> + checkup_mask = EXT_CSD_SEC_ER_EN;
> + arg = 0x80000000;
> + } else if (strcmp(argv[1], "secure-trim1") == 0) {
> + print_str = "Secure Trim Step 1";
> + checkup_mask = EXT_CSD_SEC_ER_EN | EXT_CSD_SEC_GB_CL_EN;
> + arg = 0x80000001;
> + } else if (strcmp(argv[1], "secure-trim2") == 0) {
> + print_str = "Secure Trim Step 2";
> + checkup_mask = EXT_CSD_SEC_ER_EN | EXT_CSD_SEC_GB_CL_EN;
> + arg = 0x80008000;
> + } else if (strcmp(argv[1], "trim") == 0) {
> + print_str = "Trim";
> + checkup_mask = EXT_CSD_SEC_GB_CL_EN;
> + arg = 0x00000001;
> + } else {
> + fprintf(stderr, "Unknown erase type: %s\n", argv[1]);
> + exit(1);
> + }
> +
> + dev_fd = open(argv[4], O_RDWR);
> + if (dev_fd < 0) {
> + perror(argv[4]);
> + exit(1);
> + }
> +
> + if (checkup_mask) {
> + ret = read_extcsd(dev_fd, ext_csd);
> + if (ret) {
> + fprintf(stderr, "Could not read EXT_CSD from %s\n",
> + argv[4]);
> + goto out;
> + }
> + if ((checkup_mask & ext_csd[EXT_CSD_SEC_FEATURE_SUPPORT]) !=
> + checkup_mask) {
> + fprintf(stderr, "%s is not supported in %s\n",
> + print_str, argv[4]);
> + ret = -ENOTSUP;
> + goto out;
> + }
> +
> + }
> + printf("Executing %s from 0x%08x to 0x%08x\n", print_str, start, end);
> +
> + ret = erase(dev_fd, arg, start, end);
> +out:
> + printf(" %s %s!\n\n", print_str, ret ? "Failed" : "Succeed");
> + close(dev_fd);
> + return ret;
> +}
> +
> +
> int do_ffu(int nargs, char **argv)
> {
> #ifndef MMC_IOC_MULTI_CMD
> diff --git a/mmc_cmds.h b/mmc_cmds.h
> index 9d3246c..8331ab2 100644
> --- a/mmc_cmds.h
> +++ b/mmc_cmds.h
> @@ -45,3 +45,4 @@ int do_ffu(int nargs, char **argv);
> int do_read_scr(int argc, char **argv);
> int do_read_cid(int argc, char **argv);
> int do_read_csd(int argc, char **argv);
> +int do_erase(int nargs, char **argv);
> --
> 2.31.1
^ permalink raw reply [flat|nested] 5+ messages in thread
* Re: [External] : RE: [PATCH v4] mmc-utils: Add eMMC erase command support
2021-05-07 6:36 ` Avri Altman
@ 2021-05-07 15:18 ` kimito.sakata
0 siblings, 0 replies; 5+ messages in thread
From: kimito.sakata @ 2021-05-07 15:18 UTC (permalink / raw)
To: Avri Altman, oracleks043021, Ulf Hansson, linux-mmc
Cc: linux-kernel, Bean Huo, Kenneth Gibbons
On 5/7/2021 12:36 AM, Avri Altman wrote:
>> From: Kimito Sakata <kimito.sakata@oracle.com>
>>
>> we have been using this erase feature for a while, but it is
>> still not merged into the upstream mmc-utils. Especially, for
>> the customer, every time when they update the mmc-utils, they
>> should re-install this patch again, let's try to make this
>> erase command upstreamed in the mmc-utils.
>>
>> We need to send 3 MMC commands and it is important that they
>> stay in sequence. Therefore we are using MMC_IOC_MULTI_CMD.
>>
>> Co-developed-by: Bean Huo <beanhuo@micron.com>
>> Signed-off-by: Bean Huo <beanhuo@micron.com>
>> Signed-off-by: Kimito Sakata <kimito.sakata@oracle.com>
Thank you!
Kimito
>> Reviewed-by: Kenneth Gibbons <kenny.gibbons@oracle.com>
>> Reviewed-by: Avri Altman <avri.altman@wdc.com>
> This looks good to me.
>
> Thanks,
> Avri
>
>> Changelog:
>> v3--v4:
>> 1. Replace unused pointer var with NULL.
>> 2. Added msg if ERASE_GROUP_DEF enabled for HC.
>> v2--v3:
>> 1. Remove redundant ifndef
>>
>> V1--V2:
>> 1. refactor Kimito's original patch
>> 2. change to use MMC_IOC_MULTI_CMD
>> 3. add checkup if eMMC devie supports secure erase/trim
>> ---
>> mmc.c | 8 +++
>> mmc.h | 13 ++++-
>> mmc_cmds.c | 144
>> +++++++++++++++++++++++++++++++++++++++++++++++++++++
>> mmc_cmds.h | 1 +
>> 4 files changed, 165 insertions(+), 1 deletion(-)
>>
>> diff --git a/mmc.c b/mmc.c
>> index f3d724b..eb2638b 100644
>> --- a/mmc.c
>> +++ b/mmc.c
>> @@ -229,6 +229,14 @@ static struct Command commands[] = {
>> "Run Field Firmware Update with <image name> on <device>.\n",
>> NULL
>> },
>> + { do_erase, -4,
>> + "erase", "<type> " "<start address> " "<end address> " "<device>\n"
>> + "Send Erase CMD38 with specific argument to the <device>\n\n"
>> + "NOTE!: This will delete all user data in the specified region of the
>> device\n"
>> + "<type> must be: legacy | discard | secure-erase | "
>> + "secure-trim1 | secure-trim2 | trim \n",
>> + NULL
>> + },
>> { 0, 0, 0, 0 }
>> };
>>
>> diff --git a/mmc.h b/mmc.h
>> index 5754a9d..e9766d7 100644
>> --- a/mmc.h
>> +++ b/mmc.h
>> @@ -35,7 +35,15 @@
>> #define MMC_SET_WRITE_PROT 28 /* ac [31:0] data addr R1b */
>> #define MMC_CLEAR_WRITE_PROT 29 /* ac [31:0] data addr R1b */
>> #define MMC_SEND_WRITE_PROT_TYPE 31 /* ac [31:0] data addr R1 */
>> -
>> +#define MMC_ERASE_GROUP_START 35 /* ac [31:0] data addr R1 */
>> +#define MMC_ERASE_GROUP_END 36 /* ac [31:0] data addr R1 */
>> +#define MMC_ERASE 38 /* ac [31] Secure request
>> + [30:16] set to 0
>> + [15] Force Garbage Collect request
>> + [14:2] set to 0
>> + [1] Discard Enable
>> + [0] Identify Write Blocks for
>> + Erase (or TRIM Enable) R1b */
>> /*
>> * EXT_CSD fields
>> */
>> @@ -62,6 +70,7 @@
>> #define EXT_CSD_CACHE_SIZE_2 251
>> #define EXT_CSD_CACHE_SIZE_1 250
>> #define EXT_CSD_CACHE_SIZE_0 249
>> +#define EXT_CSD_SEC_FEATURE_SUPPORT 231
>> #define EXT_CSD_BOOT_INFO 228 /* R/W */
>> #define EXT_CSD_HC_ERASE_GRP_SIZE 224
>> #define EXT_CSD_HC_WP_GRP_SIZE 221
>> @@ -190,6 +199,8 @@
>> #define EXT_CSD_REV_V4_2 2
>> #define EXT_CSD_REV_V4_1 1
>> #define EXT_CSD_REV_V4_0 0
>> +#define EXT_CSD_SEC_GB_CL_EN (1<<4)
>> +#define EXT_CSD_SEC_ER_EN (1<<0)
>>
>>
>> /* From kernel linux/mmc/core.h */
>> diff --git a/mmc_cmds.c b/mmc_cmds.c
>> index 6c24cea..afa85b7 100644
>> --- a/mmc_cmds.c
>> +++ b/mmc_cmds.c
>> @@ -2514,6 +2514,150 @@ int do_cache_dis(int nargs, char **argv)
>> return do_cache_ctrl(0, nargs, argv);
>> }
>>
>> +static int erase(int dev_fd, __u32 argin, __u32 start, __u32 end)
>> +{
>> + int ret = 0;
>> + struct mmc_ioc_multi_cmd *multi_cmd;
>> + __u8 ext_csd[512];
>> +
>> +
>> + ret = read_extcsd(dev_fd, ext_csd);
>> + if (ret) {
>> + fprintf(stderr, "Could not read EXT_CSD\n");
>> + exit(1);
>> + }
>> + if (ext_csd[EXT_CSD_ERASE_GROUP_DEF] & 0x01) {
>> + fprintf(stderr, "High Capacity Erase Unit Size=%d bytes\n" \
>> + "High Capacity Erase Timeout=%d ms\n" \
>> + "High Capacity Write Protect Group Size=%d bytes\n",
>> + ext_csd[224]*0x80000,
>> + ext_csd[223]*300,
>> + ext_csd[221]*ext_csd[224]*0x80000);
>> + }
>> +
>> + multi_cmd = calloc(1, sizeof(struct mmc_ioc_multi_cmd) +
>> + 3 * sizeof(struct mmc_ioc_cmd));
>> + if (!multi_cmd) {
>> + perror("Failed to allocate memory");
>> + return -ENOMEM;
>> + }
>> +
>> + multi_cmd->num_of_cmds = 3;
>> + /* Set erase start address */
>> + multi_cmd->cmds[0].opcode = MMC_ERASE_GROUP_START;
>> + multi_cmd->cmds[0].arg = start;
>> + multi_cmd->cmds[0].flags = MMC_RSP_SPI_R1 | MMC_RSP_R1 |
>> MMC_CMD_AC;
>> + multi_cmd->cmds[0].write_flag = 1;
>> +
>> + /* Set erase end address */
>> + multi_cmd->cmds[1].opcode = MMC_ERASE_GROUP_END;
>> + multi_cmd->cmds[1].arg = end;
>> + multi_cmd->cmds[1].flags = MMC_RSP_SPI_R1 | MMC_RSP_R1 |
>> MMC_CMD_AC;
>> + multi_cmd->cmds[1].write_flag = 1;
>> +
>> + /* Send Erase Command */
>> + multi_cmd->cmds[2].opcode = MMC_ERASE;
>> + multi_cmd->cmds[2].arg = argin;
>> + multi_cmd->cmds[2].cmd_timeout_ms = 300*255*255;
>> + multi_cmd->cmds[2].flags = MMC_RSP_SPI_R1B | MMC_RSP_R1B |
>> MMC_CMD_AC;
>> + multi_cmd->cmds[2].write_flag = 1;
>> +
>> + /* send erase cmd with multi-cmd */
>> + ret = ioctl(dev_fd, MMC_IOC_MULTI_CMD, multi_cmd);
>> + if (ret)
>> + perror("Erase multi-cmd ioctl");
>> +
>> + free(multi_cmd);
>> + return ret;
>> +}
>> +
>> +int do_erase(int nargs, char **argv)
>> +{
>> + int dev_fd, ret;
>> + char *print_str;
>> + __u8 ext_csd[512], checkup_mask = 0;
>> + __u32 arg, start, end;
>> +
>> + if (nargs != 5) {
>> + fprintf(stderr, "Usage: erase <type> <start addr> <end addr>
>> </path/to/mmcblkX>\n");
>> + exit(1);
>> + }
>> +
>> + if (strstr(argv[2], "0x") || strstr(argv[2], "0X"))
>> + start = strtol(argv[2], NULL, 16);
>> + else
>> + start = strtol(argv[2], NULL, 10);
>> +
>> + if (strstr(argv[3], "0x") || strstr(argv[3], "0X"))
>> + end = strtol(argv[3], NULL, 16);
>> + else
>> + end = strtol(argv[3], NULL, 10);
>> +
>> + if (end < start) {
>> + fprintf(stderr, "erase start [0x%08x] > erase end [0x%08x]\n",
>> + start, end);
>> + exit(1);
>> + }
>> +
>> + if (strcmp(argv[1], "legacy") == 0) {
>> + arg = 0x00000000;
>> + print_str = "Legacy Erase";
>> + } else if (strcmp(argv[1], "discard") == 0) {
>> + arg = 0x00000003;
>> + print_str = "Discard";
>> + } else if (strcmp(argv[1], "secure-erase") == 0) {
>> + print_str = "Secure Erase";
>> + checkup_mask = EXT_CSD_SEC_ER_EN;
>> + arg = 0x80000000;
>> + } else if (strcmp(argv[1], "secure-trim1") == 0) {
>> + print_str = "Secure Trim Step 1";
>> + checkup_mask = EXT_CSD_SEC_ER_EN | EXT_CSD_SEC_GB_CL_EN;
>> + arg = 0x80000001;
>> + } else if (strcmp(argv[1], "secure-trim2") == 0) {
>> + print_str = "Secure Trim Step 2";
>> + checkup_mask = EXT_CSD_SEC_ER_EN | EXT_CSD_SEC_GB_CL_EN;
>> + arg = 0x80008000;
>> + } else if (strcmp(argv[1], "trim") == 0) {
>> + print_str = "Trim";
>> + checkup_mask = EXT_CSD_SEC_GB_CL_EN;
>> + arg = 0x00000001;
>> + } else {
>> + fprintf(stderr, "Unknown erase type: %s\n", argv[1]);
>> + exit(1);
>> + }
>> +
>> + dev_fd = open(argv[4], O_RDWR);
>> + if (dev_fd < 0) {
>> + perror(argv[4]);
>> + exit(1);
>> + }
>> +
>> + if (checkup_mask) {
>> + ret = read_extcsd(dev_fd, ext_csd);
>> + if (ret) {
>> + fprintf(stderr, "Could not read EXT_CSD from %s\n",
>> + argv[4]);
>> + goto out;
>> + }
>> + if ((checkup_mask & ext_csd[EXT_CSD_SEC_FEATURE_SUPPORT]) !=
>> + checkup_mask) {
>> + fprintf(stderr, "%s is not supported in %s\n",
>> + print_str, argv[4]);
>> + ret = -ENOTSUP;
>> + goto out;
>> + }
>> +
>> + }
>> + printf("Executing %s from 0x%08x to 0x%08x\n", print_str, start, end);
>> +
>> + ret = erase(dev_fd, arg, start, end);
>> +out:
>> + printf(" %s %s!\n\n", print_str, ret ? "Failed" : "Succeed");
>> + close(dev_fd);
>> + return ret;
>> +}
>> +
>> +
>> int do_ffu(int nargs, char **argv)
>> {
>> #ifndef MMC_IOC_MULTI_CMD
>> diff --git a/mmc_cmds.h b/mmc_cmds.h
>> index 9d3246c..8331ab2 100644
>> --- a/mmc_cmds.h
>> +++ b/mmc_cmds.h
>> @@ -45,3 +45,4 @@ int do_ffu(int nargs, char **argv);
>> int do_read_scr(int argc, char **argv);
>> int do_read_cid(int argc, char **argv);
>> int do_read_csd(int argc, char **argv);
>> +int do_erase(int nargs, char **argv);
>> --
>> 2.31.1
^ permalink raw reply [flat|nested] 5+ messages in thread
* Re: [PATCH v4] mmc-utils: Add eMMC erase command support
2021-05-06 19:10 [PATCH v4] mmc-utils: Add eMMC erase command support oracleks043021
2021-05-07 6:36 ` Avri Altman
@ 2021-05-11 10:57 ` Ulf Hansson
2021-05-11 14:33 ` [External] : " Kimito Sakata
1 sibling, 1 reply; 5+ messages in thread
From: Ulf Hansson @ 2021-05-11 10:57 UTC (permalink / raw)
To: oracleks043021
Cc: linux-mmc, Linux Kernel Mailing List, Kimito Sakata, Bean Huo,
Kenneth Gibbons, Avri Altman
On Thu, 6 May 2021 at 21:10, <oracleks043021@gmail.com> wrote:
>
> From: Kimito Sakata <kimito.sakata@oracle.com>
>
> we have been using this erase feature for a while, but it is
> still not merged into the upstream mmc-utils. Especially, for
> the customer, every time when they update the mmc-utils, they
> should re-install this patch again, let's try to make this
> erase command upstreamed in the mmc-utils.
>
> We need to send 3 MMC commands and it is important that they
> stay in sequence. Therefore we are using MMC_IOC_MULTI_CMD.
>
> Co-developed-by: Bean Huo <beanhuo@micron.com>
> Signed-off-by: Bean Huo <beanhuo@micron.com>
> Signed-off-by: Kimito Sakata <kimito.sakata@oracle.com>
> Reviewed-by: Kenneth Gibbons <kenny.gibbons@oracle.com>
> Reviewed-by: Avri Altman <avri.altman@wdc.com>
Applied to git.kernel.org/pub/scm/utils/mmc/mmc-utils.git master, thanks!
Kind regards
Uffe
>
> Changelog:
> v3--v4:
> 1. Replace unused pointer var with NULL.
> 2. Added msg if ERASE_GROUP_DEF enabled for HC.
> v2--v3:
> 1. Remove redundant ifndef
>
> V1--V2:
> 1. refactor Kimito's original patch
> 2. change to use MMC_IOC_MULTI_CMD
> 3. add checkup if eMMC devie supports secure erase/trim
> ---
> mmc.c | 8 +++
> mmc.h | 13 ++++-
> mmc_cmds.c | 144 +++++++++++++++++++++++++++++++++++++++++++++++++++++
> mmc_cmds.h | 1 +
> 4 files changed, 165 insertions(+), 1 deletion(-)
>
> diff --git a/mmc.c b/mmc.c
> index f3d724b..eb2638b 100644
> --- a/mmc.c
> +++ b/mmc.c
> @@ -229,6 +229,14 @@ static struct Command commands[] = {
> "Run Field Firmware Update with <image name> on <device>.\n",
> NULL
> },
> + { do_erase, -4,
> + "erase", "<type> " "<start address> " "<end address> " "<device>\n"
> + "Send Erase CMD38 with specific argument to the <device>\n\n"
> + "NOTE!: This will delete all user data in the specified region of the device\n"
> + "<type> must be: legacy | discard | secure-erase | "
> + "secure-trim1 | secure-trim2 | trim \n",
> + NULL
> + },
> { 0, 0, 0, 0 }
> };
>
> diff --git a/mmc.h b/mmc.h
> index 5754a9d..e9766d7 100644
> --- a/mmc.h
> +++ b/mmc.h
> @@ -35,7 +35,15 @@
> #define MMC_SET_WRITE_PROT 28 /* ac [31:0] data addr R1b */
> #define MMC_CLEAR_WRITE_PROT 29 /* ac [31:0] data addr R1b */
> #define MMC_SEND_WRITE_PROT_TYPE 31 /* ac [31:0] data addr R1 */
> -
> +#define MMC_ERASE_GROUP_START 35 /* ac [31:0] data addr R1 */
> +#define MMC_ERASE_GROUP_END 36 /* ac [31:0] data addr R1 */
> +#define MMC_ERASE 38 /* ac [31] Secure request
> + [30:16] set to 0
> + [15] Force Garbage Collect request
> + [14:2] set to 0
> + [1] Discard Enable
> + [0] Identify Write Blocks for
> + Erase (or TRIM Enable) R1b */
> /*
> * EXT_CSD fields
> */
> @@ -62,6 +70,7 @@
> #define EXT_CSD_CACHE_SIZE_2 251
> #define EXT_CSD_CACHE_SIZE_1 250
> #define EXT_CSD_CACHE_SIZE_0 249
> +#define EXT_CSD_SEC_FEATURE_SUPPORT 231
> #define EXT_CSD_BOOT_INFO 228 /* R/W */
> #define EXT_CSD_HC_ERASE_GRP_SIZE 224
> #define EXT_CSD_HC_WP_GRP_SIZE 221
> @@ -190,6 +199,8 @@
> #define EXT_CSD_REV_V4_2 2
> #define EXT_CSD_REV_V4_1 1
> #define EXT_CSD_REV_V4_0 0
> +#define EXT_CSD_SEC_GB_CL_EN (1<<4)
> +#define EXT_CSD_SEC_ER_EN (1<<0)
>
>
> /* From kernel linux/mmc/core.h */
> diff --git a/mmc_cmds.c b/mmc_cmds.c
> index 6c24cea..afa85b7 100644
> --- a/mmc_cmds.c
> +++ b/mmc_cmds.c
> @@ -2514,6 +2514,150 @@ int do_cache_dis(int nargs, char **argv)
> return do_cache_ctrl(0, nargs, argv);
> }
>
> +static int erase(int dev_fd, __u32 argin, __u32 start, __u32 end)
> +{
> + int ret = 0;
> + struct mmc_ioc_multi_cmd *multi_cmd;
> + __u8 ext_csd[512];
> +
> +
> + ret = read_extcsd(dev_fd, ext_csd);
> + if (ret) {
> + fprintf(stderr, "Could not read EXT_CSD\n");
> + exit(1);
> + }
> + if (ext_csd[EXT_CSD_ERASE_GROUP_DEF] & 0x01) {
> + fprintf(stderr, "High Capacity Erase Unit Size=%d bytes\n" \
> + "High Capacity Erase Timeout=%d ms\n" \
> + "High Capacity Write Protect Group Size=%d bytes\n",
> + ext_csd[224]*0x80000,
> + ext_csd[223]*300,
> + ext_csd[221]*ext_csd[224]*0x80000);
> + }
> +
> + multi_cmd = calloc(1, sizeof(struct mmc_ioc_multi_cmd) +
> + 3 * sizeof(struct mmc_ioc_cmd));
> + if (!multi_cmd) {
> + perror("Failed to allocate memory");
> + return -ENOMEM;
> + }
> +
> + multi_cmd->num_of_cmds = 3;
> + /* Set erase start address */
> + multi_cmd->cmds[0].opcode = MMC_ERASE_GROUP_START;
> + multi_cmd->cmds[0].arg = start;
> + multi_cmd->cmds[0].flags = MMC_RSP_SPI_R1 | MMC_RSP_R1 | MMC_CMD_AC;
> + multi_cmd->cmds[0].write_flag = 1;
> +
> + /* Set erase end address */
> + multi_cmd->cmds[1].opcode = MMC_ERASE_GROUP_END;
> + multi_cmd->cmds[1].arg = end;
> + multi_cmd->cmds[1].flags = MMC_RSP_SPI_R1 | MMC_RSP_R1 | MMC_CMD_AC;
> + multi_cmd->cmds[1].write_flag = 1;
> +
> + /* Send Erase Command */
> + multi_cmd->cmds[2].opcode = MMC_ERASE;
> + multi_cmd->cmds[2].arg = argin;
> + multi_cmd->cmds[2].cmd_timeout_ms = 300*255*255;
> + multi_cmd->cmds[2].flags = MMC_RSP_SPI_R1B | MMC_RSP_R1B | MMC_CMD_AC;
> + multi_cmd->cmds[2].write_flag = 1;
> +
> + /* send erase cmd with multi-cmd */
> + ret = ioctl(dev_fd, MMC_IOC_MULTI_CMD, multi_cmd);
> + if (ret)
> + perror("Erase multi-cmd ioctl");
> +
> + free(multi_cmd);
> + return ret;
> +}
> +
> +int do_erase(int nargs, char **argv)
> +{
> + int dev_fd, ret;
> + char *print_str;
> + __u8 ext_csd[512], checkup_mask = 0;
> + __u32 arg, start, end;
> +
> + if (nargs != 5) {
> + fprintf(stderr, "Usage: erase <type> <start addr> <end addr> </path/to/mmcblkX>\n");
> + exit(1);
> + }
> +
> + if (strstr(argv[2], "0x") || strstr(argv[2], "0X"))
> + start = strtol(argv[2], NULL, 16);
> + else
> + start = strtol(argv[2], NULL, 10);
> +
> + if (strstr(argv[3], "0x") || strstr(argv[3], "0X"))
> + end = strtol(argv[3], NULL, 16);
> + else
> + end = strtol(argv[3], NULL, 10);
> +
> + if (end < start) {
> + fprintf(stderr, "erase start [0x%08x] > erase end [0x%08x]\n",
> + start, end);
> + exit(1);
> + }
> +
> + if (strcmp(argv[1], "legacy") == 0) {
> + arg = 0x00000000;
> + print_str = "Legacy Erase";
> + } else if (strcmp(argv[1], "discard") == 0) {
> + arg = 0x00000003;
> + print_str = "Discard";
> + } else if (strcmp(argv[1], "secure-erase") == 0) {
> + print_str = "Secure Erase";
> + checkup_mask = EXT_CSD_SEC_ER_EN;
> + arg = 0x80000000;
> + } else if (strcmp(argv[1], "secure-trim1") == 0) {
> + print_str = "Secure Trim Step 1";
> + checkup_mask = EXT_CSD_SEC_ER_EN | EXT_CSD_SEC_GB_CL_EN;
> + arg = 0x80000001;
> + } else if (strcmp(argv[1], "secure-trim2") == 0) {
> + print_str = "Secure Trim Step 2";
> + checkup_mask = EXT_CSD_SEC_ER_EN | EXT_CSD_SEC_GB_CL_EN;
> + arg = 0x80008000;
> + } else if (strcmp(argv[1], "trim") == 0) {
> + print_str = "Trim";
> + checkup_mask = EXT_CSD_SEC_GB_CL_EN;
> + arg = 0x00000001;
> + } else {
> + fprintf(stderr, "Unknown erase type: %s\n", argv[1]);
> + exit(1);
> + }
> +
> + dev_fd = open(argv[4], O_RDWR);
> + if (dev_fd < 0) {
> + perror(argv[4]);
> + exit(1);
> + }
> +
> + if (checkup_mask) {
> + ret = read_extcsd(dev_fd, ext_csd);
> + if (ret) {
> + fprintf(stderr, "Could not read EXT_CSD from %s\n",
> + argv[4]);
> + goto out;
> + }
> + if ((checkup_mask & ext_csd[EXT_CSD_SEC_FEATURE_SUPPORT]) !=
> + checkup_mask) {
> + fprintf(stderr, "%s is not supported in %s\n",
> + print_str, argv[4]);
> + ret = -ENOTSUP;
> + goto out;
> + }
> +
> + }
> + printf("Executing %s from 0x%08x to 0x%08x\n", print_str, start, end);
> +
> + ret = erase(dev_fd, arg, start, end);
> +out:
> + printf(" %s %s!\n\n", print_str, ret ? "Failed" : "Succeed");
> + close(dev_fd);
> + return ret;
> +}
> +
> +
> int do_ffu(int nargs, char **argv)
> {
> #ifndef MMC_IOC_MULTI_CMD
> diff --git a/mmc_cmds.h b/mmc_cmds.h
> index 9d3246c..8331ab2 100644
> --- a/mmc_cmds.h
> +++ b/mmc_cmds.h
> @@ -45,3 +45,4 @@ int do_ffu(int nargs, char **argv);
> int do_read_scr(int argc, char **argv);
> int do_read_cid(int argc, char **argv);
> int do_read_csd(int argc, char **argv);
> +int do_erase(int nargs, char **argv);
> --
> 2.31.1
>
^ permalink raw reply [flat|nested] 5+ messages in thread
* Re: [External] : Re: [PATCH v4] mmc-utils: Add eMMC erase command support
2021-05-11 10:57 ` Ulf Hansson
@ 2021-05-11 14:33 ` Kimito Sakata
0 siblings, 0 replies; 5+ messages in thread
From: Kimito Sakata @ 2021-05-11 14:33 UTC (permalink / raw)
To: Ulf Hansson, oracleks043021
Cc: linux-mmc, Linux Kernel Mailing List, Bean Huo, Kenneth Gibbons,
Avri Altman
Thank you!
On 5/11/2021 4:57 AM, Ulf Hansson wrote:
> On Thu, 6 May 2021 at 21:10, <oracleks043021@gmail.com> wrote:
>> From: Kimito Sakata <kimito.sakata@oracle.com>
>>
>> we have been using this erase feature for a while, but it is
>> still not merged into the upstream mmc-utils. Especially, for
>> the customer, every time when they update the mmc-utils, they
>> should re-install this patch again, let's try to make this
>> erase command upstreamed in the mmc-utils.
>>
>> We need to send 3 MMC commands and it is important that they
>> stay in sequence. Therefore we are using MMC_IOC_MULTI_CMD.
>>
>> Co-developed-by: Bean Huo <beanhuo@micron.com>
>> Signed-off-by: Bean Huo <beanhuo@micron.com>
>> Signed-off-by: Kimito Sakata <kimito.sakata@oracle.com>
>> Reviewed-by: Kenneth Gibbons <kenny.gibbons@oracle.com>
>> Reviewed-by: Avri Altman <avri.altman@wdc.com>
> Applied to git.kernel.org/pub/scm/utils/mmc/mmc-utils.git master, thanks!
>
> Kind regards
> Uffe
>
>
>> Changelog:
>> v3--v4:
>> 1. Replace unused pointer var with NULL.
>> 2. Added msg if ERASE_GROUP_DEF enabled for HC.
>> v2--v3:
>> 1. Remove redundant ifndef
>>
>> V1--V2:
>> 1. refactor Kimito's original patch
>> 2. change to use MMC_IOC_MULTI_CMD
>> 3. add checkup if eMMC devie supports secure erase/trim
>> ---
>> mmc.c | 8 +++
>> mmc.h | 13 ++++-
>> mmc_cmds.c | 144 +++++++++++++++++++++++++++++++++++++++++++++++++++++
>> mmc_cmds.h | 1 +
>> 4 files changed, 165 insertions(+), 1 deletion(-)
>>
>> diff --git a/mmc.c b/mmc.c
>> index f3d724b..eb2638b 100644
>> --- a/mmc.c
>> +++ b/mmc.c
>> @@ -229,6 +229,14 @@ static struct Command commands[] = {
>> "Run Field Firmware Update with <image name> on <device>.\n",
>> NULL
>> },
>> + { do_erase, -4,
>> + "erase", "<type> " "<start address> " "<end address> " "<device>\n"
>> + "Send Erase CMD38 with specific argument to the <device>\n\n"
>> + "NOTE!: This will delete all user data in the specified region of the device\n"
>> + "<type> must be: legacy | discard | secure-erase | "
>> + "secure-trim1 | secure-trim2 | trim \n",
>> + NULL
>> + },
>> { 0, 0, 0, 0 }
>> };
>>
>> diff --git a/mmc.h b/mmc.h
>> index 5754a9d..e9766d7 100644
>> --- a/mmc.h
>> +++ b/mmc.h
>> @@ -35,7 +35,15 @@
>> #define MMC_SET_WRITE_PROT 28 /* ac [31:0] data addr R1b */
>> #define MMC_CLEAR_WRITE_PROT 29 /* ac [31:0] data addr R1b */
>> #define MMC_SEND_WRITE_PROT_TYPE 31 /* ac [31:0] data addr R1 */
>> -
>> +#define MMC_ERASE_GROUP_START 35 /* ac [31:0] data addr R1 */
>> +#define MMC_ERASE_GROUP_END 36 /* ac [31:0] data addr R1 */
>> +#define MMC_ERASE 38 /* ac [31] Secure request
>> + [30:16] set to 0
>> + [15] Force Garbage Collect request
>> + [14:2] set to 0
>> + [1] Discard Enable
>> + [0] Identify Write Blocks for
>> + Erase (or TRIM Enable) R1b */
>> /*
>> * EXT_CSD fields
>> */
>> @@ -62,6 +70,7 @@
>> #define EXT_CSD_CACHE_SIZE_2 251
>> #define EXT_CSD_CACHE_SIZE_1 250
>> #define EXT_CSD_CACHE_SIZE_0 249
>> +#define EXT_CSD_SEC_FEATURE_SUPPORT 231
>> #define EXT_CSD_BOOT_INFO 228 /* R/W */
>> #define EXT_CSD_HC_ERASE_GRP_SIZE 224
>> #define EXT_CSD_HC_WP_GRP_SIZE 221
>> @@ -190,6 +199,8 @@
>> #define EXT_CSD_REV_V4_2 2
>> #define EXT_CSD_REV_V4_1 1
>> #define EXT_CSD_REV_V4_0 0
>> +#define EXT_CSD_SEC_GB_CL_EN (1<<4)
>> +#define EXT_CSD_SEC_ER_EN (1<<0)
>>
>>
>> /* From kernel linux/mmc/core.h */
>> diff --git a/mmc_cmds.c b/mmc_cmds.c
>> index 6c24cea..afa85b7 100644
>> --- a/mmc_cmds.c
>> +++ b/mmc_cmds.c
>> @@ -2514,6 +2514,150 @@ int do_cache_dis(int nargs, char **argv)
>> return do_cache_ctrl(0, nargs, argv);
>> }
>>
>> +static int erase(int dev_fd, __u32 argin, __u32 start, __u32 end)
>> +{
>> + int ret = 0;
>> + struct mmc_ioc_multi_cmd *multi_cmd;
>> + __u8 ext_csd[512];
>> +
>> +
>> + ret = read_extcsd(dev_fd, ext_csd);
>> + if (ret) {
>> + fprintf(stderr, "Could not read EXT_CSD\n");
>> + exit(1);
>> + }
>> + if (ext_csd[EXT_CSD_ERASE_GROUP_DEF] & 0x01) {
>> + fprintf(stderr, "High Capacity Erase Unit Size=%d bytes\n" \
>> + "High Capacity Erase Timeout=%d ms\n" \
>> + "High Capacity Write Protect Group Size=%d bytes\n",
>> + ext_csd[224]*0x80000,
>> + ext_csd[223]*300,
>> + ext_csd[221]*ext_csd[224]*0x80000);
>> + }
>> +
>> + multi_cmd = calloc(1, sizeof(struct mmc_ioc_multi_cmd) +
>> + 3 * sizeof(struct mmc_ioc_cmd));
>> + if (!multi_cmd) {
>> + perror("Failed to allocate memory");
>> + return -ENOMEM;
>> + }
>> +
>> + multi_cmd->num_of_cmds = 3;
>> + /* Set erase start address */
>> + multi_cmd->cmds[0].opcode = MMC_ERASE_GROUP_START;
>> + multi_cmd->cmds[0].arg = start;
>> + multi_cmd->cmds[0].flags = MMC_RSP_SPI_R1 | MMC_RSP_R1 | MMC_CMD_AC;
>> + multi_cmd->cmds[0].write_flag = 1;
>> +
>> + /* Set erase end address */
>> + multi_cmd->cmds[1].opcode = MMC_ERASE_GROUP_END;
>> + multi_cmd->cmds[1].arg = end;
>> + multi_cmd->cmds[1].flags = MMC_RSP_SPI_R1 | MMC_RSP_R1 | MMC_CMD_AC;
>> + multi_cmd->cmds[1].write_flag = 1;
>> +
>> + /* Send Erase Command */
>> + multi_cmd->cmds[2].opcode = MMC_ERASE;
>> + multi_cmd->cmds[2].arg = argin;
>> + multi_cmd->cmds[2].cmd_timeout_ms = 300*255*255;
>> + multi_cmd->cmds[2].flags = MMC_RSP_SPI_R1B | MMC_RSP_R1B | MMC_CMD_AC;
>> + multi_cmd->cmds[2].write_flag = 1;
>> +
>> + /* send erase cmd with multi-cmd */
>> + ret = ioctl(dev_fd, MMC_IOC_MULTI_CMD, multi_cmd);
>> + if (ret)
>> + perror("Erase multi-cmd ioctl");
>> +
>> + free(multi_cmd);
>> + return ret;
>> +}
>> +
>> +int do_erase(int nargs, char **argv)
>> +{
>> + int dev_fd, ret;
>> + char *print_str;
>> + __u8 ext_csd[512], checkup_mask = 0;
>> + __u32 arg, start, end;
>> +
>> + if (nargs != 5) {
>> + fprintf(stderr, "Usage: erase <type> <start addr> <end addr> </path/to/mmcblkX>\n");
>> + exit(1);
>> + }
>> +
>> + if (strstr(argv[2], "0x") || strstr(argv[2], "0X"))
>> + start = strtol(argv[2], NULL, 16);
>> + else
>> + start = strtol(argv[2], NULL, 10);
>> +
>> + if (strstr(argv[3], "0x") || strstr(argv[3], "0X"))
>> + end = strtol(argv[3], NULL, 16);
>> + else
>> + end = strtol(argv[3], NULL, 10);
>> +
>> + if (end < start) {
>> + fprintf(stderr, "erase start [0x%08x] > erase end [0x%08x]\n",
>> + start, end);
>> + exit(1);
>> + }
>> +
>> + if (strcmp(argv[1], "legacy") == 0) {
>> + arg = 0x00000000;
>> + print_str = "Legacy Erase";
>> + } else if (strcmp(argv[1], "discard") == 0) {
>> + arg = 0x00000003;
>> + print_str = "Discard";
>> + } else if (strcmp(argv[1], "secure-erase") == 0) {
>> + print_str = "Secure Erase";
>> + checkup_mask = EXT_CSD_SEC_ER_EN;
>> + arg = 0x80000000;
>> + } else if (strcmp(argv[1], "secure-trim1") == 0) {
>> + print_str = "Secure Trim Step 1";
>> + checkup_mask = EXT_CSD_SEC_ER_EN | EXT_CSD_SEC_GB_CL_EN;
>> + arg = 0x80000001;
>> + } else if (strcmp(argv[1], "secure-trim2") == 0) {
>> + print_str = "Secure Trim Step 2";
>> + checkup_mask = EXT_CSD_SEC_ER_EN | EXT_CSD_SEC_GB_CL_EN;
>> + arg = 0x80008000;
>> + } else if (strcmp(argv[1], "trim") == 0) {
>> + print_str = "Trim";
>> + checkup_mask = EXT_CSD_SEC_GB_CL_EN;
>> + arg = 0x00000001;
>> + } else {
>> + fprintf(stderr, "Unknown erase type: %s\n", argv[1]);
>> + exit(1);
>> + }
>> +
>> + dev_fd = open(argv[4], O_RDWR);
>> + if (dev_fd < 0) {
>> + perror(argv[4]);
>> + exit(1);
>> + }
>> +
>> + if (checkup_mask) {
>> + ret = read_extcsd(dev_fd, ext_csd);
>> + if (ret) {
>> + fprintf(stderr, "Could not read EXT_CSD from %s\n",
>> + argv[4]);
>> + goto out;
>> + }
>> + if ((checkup_mask & ext_csd[EXT_CSD_SEC_FEATURE_SUPPORT]) !=
>> + checkup_mask) {
>> + fprintf(stderr, "%s is not supported in %s\n",
>> + print_str, argv[4]);
>> + ret = -ENOTSUP;
>> + goto out;
>> + }
>> +
>> + }
>> + printf("Executing %s from 0x%08x to 0x%08x\n", print_str, start, end);
>> +
>> + ret = erase(dev_fd, arg, start, end);
>> +out:
>> + printf(" %s %s!\n\n", print_str, ret ? "Failed" : "Succeed");
>> + close(dev_fd);
>> + return ret;
>> +}
>> +
>> +
>> int do_ffu(int nargs, char **argv)
>> {
>> #ifndef MMC_IOC_MULTI_CMD
>> diff --git a/mmc_cmds.h b/mmc_cmds.h
>> index 9d3246c..8331ab2 100644
>> --- a/mmc_cmds.h
>> +++ b/mmc_cmds.h
>> @@ -45,3 +45,4 @@ int do_ffu(int nargs, char **argv);
>> int do_read_scr(int argc, char **argv);
>> int do_read_cid(int argc, char **argv);
>> int do_read_csd(int argc, char **argv);
>> +int do_erase(int nargs, char **argv);
>> --
>> 2.31.1
>>
^ permalink raw reply [flat|nested] 5+ messages in thread
end of thread, other threads:[~2021-05-11 14:33 UTC | newest]
Thread overview: 5+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2021-05-06 19:10 [PATCH v4] mmc-utils: Add eMMC erase command support oracleks043021
2021-05-07 6:36 ` Avri Altman
2021-05-07 15:18 ` [External] : " kimito.sakata
2021-05-11 10:57 ` Ulf Hansson
2021-05-11 14:33 ` [External] : " Kimito Sakata
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.