From mboxrd@z Thu Jan 1 00:00:00 1970 From: Hoefle Marco Date: Tue, 3 Nov 2015 09:08:14 +0000 Subject: [U-Boot] u-boot device model SPI + SPI Flash In-Reply-To: <5631D75E.2000402@xilinx.com> References: <7ccbb9ae7fdb4663832167baa173d6b8@LysExc01.nanotronic.local> <0af28a07c7704451be0aa3fce01764d0@LysExc01.nanotronic.local> <320637582ef942f0b71a55d692d254e5@LysExc01.nanotronic.local> <7a85439a92f64a71a5f2b08b3fdc4576@LysExc01.nanotronic.local> <562E2FEE.60605@xilinx.com> <562F61EA.5080303@xilinx.com> <562F8F1A.4050903@xilinx.com> , <5631D75E.2000402@xilinx.com> Message-ID: <4a9b0987ae1047fdb9bd0e84160400ac@LysExc01.nanotronic.local> List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: u-boot@lists.denx.de Hello Michal, I saw a change on this file drivers/mtd/spi/sf-uclass.c regarding the dm problem. I replaced this file on mainline u-boot but the result is the same. Is there anything else to change? I looked at your here: https://github.com/Xilinx/u-boot-xlnx/commits/master/drivers/spi Thanks, Marco ________________________________________ Von: Michal Simek Gesendet: Donnerstag, 29. Oktober 2015 09:22 An: Hoefle Marco; Michal Simek; Jagan Teki Cc: u-boot at lists.denx.de; emanuel stiebler Betreff: Re: AW: [U-Boot] u-boot device model SPI + SPI Flash Hi, On 10/27/2015 04:03 PM, Hoefle Marco wrote: > Hello Michal, > ok I will then stop trying to get SPI working on mainline and watch your commits on > https://github.com/Xilinx/u-boot-xlnx > > We have a custom Artix Board here and I would be happy to test your commits on our hardware. I have sent patches to mainline mailing list and also update xilinx tree. petalinux bsp which uses this configuration should be out at the end of Nov. Thanks, Michal