[PATCH v5 00/21] x86/resctrl: Make resctrl_arch_rmid_read() return values in bytes

[PATCH v5 00/21] x86/resctrl: Make resctrl_arch_rmid_read() return values in bytes

[James Morse]

Changes in this version?
 * Use supports_mba_mbps() in resctrl_{on,off}line_domain()
 * Remove some error handling for errors that can't happen.
 * Restored mbps_val[] reset code to set_mba_sc().
 * Moved mbps_val[] reset in rdtgroup_init_mba() to reduce noise.
 * Added resctrl_arch_round_mon_val() to fix the user provided value.

---
The aim of this series is to insert a split between the parts of the monitor
code that the architecture must implement, and those that are part of the
resctrl filesystem. The eventual aim is to move all filesystem parts out
to live in /fs/resctrl, so that resctrl can be wired up for MPAM.

What's MPAM? See the cover letter of a previous series. [1]

The series adds domain online/offline callbacks to allow the filesystem to
manage some of its structures itself, then moves all the 'mba_sc' behaviour
to be part of the filesystem.
This means another architecture doesn't need to provide an mbps_val array.
As its all software, the resctrl filesystem should be able to do this without
any help from the architecture code.

Finally __rmid_read() is refactored to be the API call that the architecture
provides to read a counter value. All the hardware specific overflow detection,
scaling and value correction should occur behind this helper.


This series is based on v5.19-rc1, and can be retrieved from:
git://git.kernel.org/pub/scm/linux/kernel/git/morse/linux.git mpam/resctrl_monitors_in_bytes/v5

[0] git://git.kernel.org/pub/scm/linux/kernel/git/morse/linux.git mpam/resctrl_merge_cdp/v7
[1] https://lore.kernel.org/lkml/20210728170637.25610-1-james.morse@arm.com/

[v1] https://lore.kernel.org/lkml/20210729223610.29373-1-james.morse@arm.com/
[v2] https://lore.kernel.org/lkml/20211001160302.31189-1-james.morse@arm.com/
[v3] https://lore.kernel.org/lkml/20220217182110.7176-1-james.morse@arm.com/
[v4] https://lore.kernel.org/lkml/20220412124419.30689-1-james.morse@arm.com/

James Morse (21):
  x86/resctrl: Kill off alloc_enabled
  x86/resctrl: Merge mon_capable and mon_enabled
  x86/resctrl: Add domain online callback for resctrl work
  x86/resctrl: Group struct rdt_hw_domain cleanup
  x86/resctrl: Add domain offline callback for resctrl work
  x86/resctrl: Remove set_mba_sc()s control array re-initialisation
  x86/resctrl: Abstract and use supports_mba_mbps()
  x86/resctrl: Create mba_sc configuration in the rdt_domain
  x86/resctrl: Switch over to the resctrl mbps_val list
  x86/resctrl: Remove architecture copy of mbps_val
  x86/resctrl: Allow update_mba_bw() to update controls directly
  x86/resctrl: Calculate bandwidth from the previous __mon_event_count()
    chunks
  x86/resctrl: Add per-rmid arch private storage for overflow and chunks
  x86/resctrl: Allow per-rmid arch private storage to be reset
  x86/resctrl: Abstract __rmid_read()
  x86/resctrl: Pass the required parameters into
    resctrl_arch_rmid_read()
  x86/resctrl: Move mbm_overflow_count() into resctrl_arch_rmid_read()
  x86/resctrl: Move get_corrected_mbm_count() into
    resctrl_arch_rmid_read()
  x86/resctrl: Rename and change the units of resctrl_cqm_threshold
  x86/resctrl: Add resctrl_rmid_realloc_limit to abstract x86's
    boot_cpu_data
  x86/resctrl: Make resctrl_arch_rmid_read() return values in bytes

 arch/x86/include/asm/resctrl.h            |   9 +
 arch/x86/kernel/cpu/resctrl/core.c        | 117 ++++-------
 arch/x86/kernel/cpu/resctrl/ctrlmondata.c |  75 ++++---
 arch/x86/kernel/cpu/resctrl/internal.h    |  61 +++---
 arch/x86/kernel/cpu/resctrl/monitor.c     | 232 ++++++++++++++--------
 arch/x86/kernel/cpu/resctrl/pseudo_lock.c |   2 +-
 arch/x86/kernel/cpu/resctrl/rdtgroup.c    | 216 ++++++++++++++++----
 include/linux/resctrl.h                   |  64 +++++-
 8 files changed, 514 insertions(+), 262 deletions(-)

-- 
2.30.2

[PATCH v5 01/21] x86/resctrl: Kill off alloc_enabled

[James Morse]

rdt_resources_all[] used to have extra entries for L2CODE/L2DATA.
These were hidden from resctrl by the alloc_enabled value.

Now that the L2/L2CODE/L2DATA resources have been merged together,
alloc_enabled doesn't mean anything, it always has the same value as
alloc_capable which indicates allocation is supported by this resource.

Remove alloc_enabled and its helpers.

Reviewed-by: Jamie Iles <quic_jiles@quicinc.com>
Tested-by: Xin Hao <xhao@linux.alibaba.com>
Reviewed-by: Shaopeng Tan <tan.shaopeng@fujitsu.com>
Tested-by: Shaopeng Tan <tan.shaopeng@fujitsu.com>
Tested-by: Cristian Marussi <cristian.marussi@arm.com>
Signed-off-by: James Morse <james.morse@arm.com>
---
Changes since v3:
 * Removed duplicate words from commit message.

Changes since v1:
 * Fixed comment in rdtgroup_create_info_dir()
---
 arch/x86/kernel/cpu/resctrl/core.c        | 4 ----
 arch/x86/kernel/cpu/resctrl/internal.h    | 4 ----
 arch/x86/kernel/cpu/resctrl/pseudo_lock.c | 2 +-
 arch/x86/kernel/cpu/resctrl/rdtgroup.c    | 6 +++---
 include/linux/resctrl.h                   | 2 --
 5 files changed, 4 insertions(+), 14 deletions(-)

diff --git a/arch/x86/kernel/cpu/resctrl/core.c b/arch/x86/kernel/cpu/resctrl/core.c
index bb1c3f5f60c8..2f87177f1f69 100644
--- a/arch/x86/kernel/cpu/resctrl/core.c
+++ b/arch/x86/kernel/cpu/resctrl/core.c
@@ -147,7 +147,6 @@ static inline void cache_alloc_hsw_probe(void)
 	r->cache.shareable_bits = 0xc0000;
 	r->cache.min_cbm_bits = 2;
 	r->alloc_capable = true;
-	r->alloc_enabled = true;
 
 	rdt_alloc_capable = true;
 }
@@ -211,7 +210,6 @@ static bool __get_mem_config_intel(struct rdt_resource *r)
 	thread_throttle_mode_init();
 
 	r->alloc_capable = true;
-	r->alloc_enabled = true;
 
 	return true;
 }
@@ -242,7 +240,6 @@ static bool __rdt_get_mem_config_amd(struct rdt_resource *r)
 	r->data_width = 4;
 
 	r->alloc_capable = true;
-	r->alloc_enabled = true;
 
 	return true;
 }
@@ -261,7 +258,6 @@ static void rdt_get_cache_alloc_cfg(int idx, struct rdt_resource *r)
 	r->cache.shareable_bits = ebx & r->default_ctrl;
 	r->data_width = (r->cache.cbm_len + 3) / 4;
 	r->alloc_capable = true;
-	r->alloc_enabled = true;
 }
 
 static void rdt_get_cdp_config(int level)
diff --git a/arch/x86/kernel/cpu/resctrl/internal.h b/arch/x86/kernel/cpu/resctrl/internal.h
index 1d647188a43b..53f3d275a98f 100644
--- a/arch/x86/kernel/cpu/resctrl/internal.h
+++ b/arch/x86/kernel/cpu/resctrl/internal.h
@@ -459,10 +459,6 @@ int resctrl_arch_set_cdp_enabled(enum resctrl_res_level l, bool enable);
 	for_each_rdt_resource(r)					      \
 		if (r->mon_capable)
 
-#define for_each_alloc_enabled_rdt_resource(r)				      \
-	for_each_rdt_resource(r)					      \
-		if (r->alloc_enabled)
-
 #define for_each_mon_enabled_rdt_resource(r)				      \
 	for_each_rdt_resource(r)					      \
 		if (r->mon_enabled)
diff --git a/arch/x86/kernel/cpu/resctrl/pseudo_lock.c b/arch/x86/kernel/cpu/resctrl/pseudo_lock.c
index db813f819ad6..f810969ced4b 100644
--- a/arch/x86/kernel/cpu/resctrl/pseudo_lock.c
+++ b/arch/x86/kernel/cpu/resctrl/pseudo_lock.c
@@ -835,7 +835,7 @@ bool rdtgroup_pseudo_locked_in_hierarchy(struct rdt_domain *d)
 	 * First determine which cpus have pseudo-locked regions
 	 * associated with them.
 	 */
-	for_each_alloc_enabled_rdt_resource(r) {
+	for_each_alloc_capable_rdt_resource(r) {
 		list_for_each_entry(d_i, &r->domains, list) {
 			if (d_i->plr)
 				cpumask_or(cpu_with_psl, cpu_with_psl,
diff --git a/arch/x86/kernel/cpu/resctrl/rdtgroup.c b/arch/x86/kernel/cpu/resctrl/rdtgroup.c
index f276aff521e8..526eb933333b 100644
--- a/arch/x86/kernel/cpu/resctrl/rdtgroup.c
+++ b/arch/x86/kernel/cpu/resctrl/rdtgroup.c
@@ -1756,7 +1756,7 @@ static int rdtgroup_create_info_dir(struct kernfs_node *parent_kn)
 	if (ret)
 		goto out_destroy;
 
-	/* loop over enabled controls, these are all alloc_enabled */
+	/* loop over enabled controls, these are all alloc_capable */
 	list_for_each_entry(s, &resctrl_schema_all, list) {
 		r = s->res;
 		fflags =  r->fflags | RF_CTRL_INFO;
@@ -2106,7 +2106,7 @@ static int schemata_list_create(void)
 	struct rdt_resource *r;
 	int ret = 0;
 
-	for_each_alloc_enabled_rdt_resource(r) {
+	for_each_alloc_capable_rdt_resource(r) {
 		if (resctrl_arch_get_cdp_enabled(r->rid)) {
 			ret = schemata_list_add(r, CDP_CODE);
 			if (ret)
@@ -2452,7 +2452,7 @@ static void rdt_kill_sb(struct super_block *sb)
 	set_mba_sc(false);
 
 	/*Put everything back to default values. */
-	for_each_alloc_enabled_rdt_resource(r)
+	for_each_alloc_capable_rdt_resource(r)
 		reset_all_ctrls(r);
 	cdp_disable_all();
 	rmdir_all_sub();
diff --git a/include/linux/resctrl.h b/include/linux/resctrl.h
index 21deb5212bbd..386ab3a41500 100644
--- a/include/linux/resctrl.h
+++ b/include/linux/resctrl.h
@@ -130,7 +130,6 @@ struct resctrl_schema;
 /**
  * struct rdt_resource - attributes of a resctrl resource
  * @rid:		The index of the resource
- * @alloc_enabled:	Is allocation enabled on this machine
  * @mon_enabled:	Is monitoring enabled for this feature
  * @alloc_capable:	Is allocation available on this machine
  * @mon_capable:	Is monitor feature available on this machine
@@ -150,7 +149,6 @@ struct resctrl_schema;
  */
 struct rdt_resource {
 	int			rid;
-	bool			alloc_enabled;
 	bool			mon_enabled;
 	bool			alloc_capable;
 	bool			mon_capable;
-- 
2.30.2

[PATCH v5 02/21] x86/resctrl: Merge mon_capable and mon_enabled

[James Morse]

mon_enabled and mon_capable are always set as a pair by
rdt_get_mon_l3_config().

There is no point having two values.

Merge them together.

Reviewed-by: Jamie Iles <quic_jiles@quicinc.com>
Tested-by: Xin Hao <xhao@linux.alibaba.com>
Reviewed-by: Shaopeng Tan <tan.shaopeng@fujitsu.com>
Tested-by: Shaopeng Tan <tan.shaopeng@fujitsu.com>
Tested-by: Cristian Marussi <cristian.marussi@arm.com>
Signed-off-by: James Morse <james.morse@arm.com>
---
Changes since v1:
 * Removed stray cdp_capable changes.
---
 arch/x86/kernel/cpu/resctrl/internal.h | 4 ----
 arch/x86/kernel/cpu/resctrl/monitor.c  | 1 -
 arch/x86/kernel/cpu/resctrl/rdtgroup.c | 8 ++++----
 include/linux/resctrl.h                | 2 --
 4 files changed, 4 insertions(+), 11 deletions(-)

diff --git a/arch/x86/kernel/cpu/resctrl/internal.h b/arch/x86/kernel/cpu/resctrl/internal.h
index 53f3d275a98f..8828b5c1b6d2 100644
--- a/arch/x86/kernel/cpu/resctrl/internal.h
+++ b/arch/x86/kernel/cpu/resctrl/internal.h
@@ -459,10 +459,6 @@ int resctrl_arch_set_cdp_enabled(enum resctrl_res_level l, bool enable);
 	for_each_rdt_resource(r)					      \
 		if (r->mon_capable)
 
-#define for_each_mon_enabled_rdt_resource(r)				      \
-	for_each_rdt_resource(r)					      \
-		if (r->mon_enabled)
-
 /* CPUID.(EAX=10H, ECX=ResID=1).EAX */
 union cpuid_0x10_1_eax {
 	struct {
diff --git a/arch/x86/kernel/cpu/resctrl/monitor.c b/arch/x86/kernel/cpu/resctrl/monitor.c
index eaf25a234ff5..497cadf3285d 100644
--- a/arch/x86/kernel/cpu/resctrl/monitor.c
+++ b/arch/x86/kernel/cpu/resctrl/monitor.c
@@ -717,7 +717,6 @@ int rdt_get_mon_l3_config(struct rdt_resource *r)
 	l3_mon_evt_init(r);
 
 	r->mon_capable = true;
-	r->mon_enabled = true;
 
 	return 0;
 }
diff --git a/arch/x86/kernel/cpu/resctrl/rdtgroup.c b/arch/x86/kernel/cpu/resctrl/rdtgroup.c
index 526eb933333b..def7c6681f8b 100644
--- a/arch/x86/kernel/cpu/resctrl/rdtgroup.c
+++ b/arch/x86/kernel/cpu/resctrl/rdtgroup.c
@@ -1765,7 +1765,7 @@ static int rdtgroup_create_info_dir(struct kernfs_node *parent_kn)
 			goto out_destroy;
 	}
 
-	for_each_mon_enabled_rdt_resource(r) {
+	for_each_mon_capable_rdt_resource(r) {
 		fflags =  r->fflags | RF_MON_INFO;
 		sprintf(name, "%s_MON", r->name);
 		ret = rdtgroup_mkdir_info_resdir(r, name, fflags);
@@ -2504,7 +2504,7 @@ void rmdir_mondata_subdir_allrdtgrp(struct rdt_resource *r, unsigned int dom_id)
 	struct rdtgroup *prgrp, *crgrp;
 	char name[32];
 
-	if (!r->mon_enabled)
+	if (!r->mon_capable)
 		return;
 
 	list_for_each_entry(prgrp, &rdt_all_groups, rdtgroup_list) {
@@ -2572,7 +2572,7 @@ void mkdir_mondata_subdir_allrdtgrp(struct rdt_resource *r,
 	struct rdtgroup *prgrp, *crgrp;
 	struct list_head *head;
 
-	if (!r->mon_enabled)
+	if (!r->mon_capable)
 		return;
 
 	list_for_each_entry(prgrp, &rdt_all_groups, rdtgroup_list) {
@@ -2642,7 +2642,7 @@ static int mkdir_mondata_all(struct kernfs_node *parent_kn,
 	 * Create the subdirectories for each domain. Note that all events
 	 * in a domain like L3 are grouped into a resource whose domain is L3
 	 */
-	for_each_mon_enabled_rdt_resource(r) {
+	for_each_mon_capable_rdt_resource(r) {
 		ret = mkdir_mondata_subdir_alldom(kn, r, prgrp);
 		if (ret)
 			goto out_destroy;
diff --git a/include/linux/resctrl.h b/include/linux/resctrl.h
index 386ab3a41500..8180c539800d 100644
--- a/include/linux/resctrl.h
+++ b/include/linux/resctrl.h
@@ -130,7 +130,6 @@ struct resctrl_schema;
 /**
  * struct rdt_resource - attributes of a resctrl resource
  * @rid:		The index of the resource
- * @mon_enabled:	Is monitoring enabled for this feature
  * @alloc_capable:	Is allocation available on this machine
  * @mon_capable:	Is monitor feature available on this machine
  * @num_rmid:		Number of RMIDs available
@@ -149,7 +148,6 @@ struct resctrl_schema;
  */
 struct rdt_resource {
 	int			rid;
-	bool			mon_enabled;
 	bool			alloc_capable;
 	bool			mon_capable;
 	int			num_rmid;
-- 
2.30.2

[PATCH v5 03/21] x86/resctrl: Add domain online callback for resctrl work

[James Morse]

Because domains are exposed to user-space via resctrl, the filesystem
must update its state when CPU hotplug callbacks are triggered.

Some of this work is common to any architecture that would support
resctrl, but the work is tied up with the architecture code to
allocate the memory.

Move domain_setup_mon_state(), the monitor subdir creation call and the
mbm/limbo workers into a new resctrl_online_domain() call. These bits
are not specific to the architecture. Grouping them in one function
allows that code to be moved to /fs/ and re-used by another architecture.

Reviewed-by: Jamie Iles <quic_jiles@quicinc.com>
Tested-by: Xin Hao <xhao@linux.alibaba.com>
Reviewed-by: Shaopeng Tan <tan.shaopeng@fujitsu.com>
Tested-by: Shaopeng Tan <tan.shaopeng@fujitsu.com>
Tested-by: Cristian Marussi <cristian.marussi@arm.com>
Signed-off-by: James Morse <james.morse@arm.com>
---
Changes since v2:
 * Fixed kfree(d) rebase artefact.

Changes since v1:
 * Capitalisation
 * Removed inline comment
 * Added to the commit message
---
 arch/x86/kernel/cpu/resctrl/core.c     | 57 ++++------------------
 arch/x86/kernel/cpu/resctrl/internal.h |  2 -
 arch/x86/kernel/cpu/resctrl/rdtgroup.c | 65 ++++++++++++++++++++++++--
 include/linux/resctrl.h                |  1 +
 4 files changed, 69 insertions(+), 56 deletions(-)

diff --git a/arch/x86/kernel/cpu/resctrl/core.c b/arch/x86/kernel/cpu/resctrl/core.c
index 2f87177f1f69..25f30148478b 100644
--- a/arch/x86/kernel/cpu/resctrl/core.c
+++ b/arch/x86/kernel/cpu/resctrl/core.c
@@ -443,42 +443,6 @@ static int domain_setup_ctrlval(struct rdt_resource *r, struct rdt_domain *d)
 	return 0;
 }
 
-static int domain_setup_mon_state(struct rdt_resource *r, struct rdt_domain *d)
-{
-	size_t tsize;
-
-	if (is_llc_occupancy_enabled()) {
-		d->rmid_busy_llc = bitmap_zalloc(r->num_rmid, GFP_KERNEL);
-		if (!d->rmid_busy_llc)
-			return -ENOMEM;
-		INIT_DELAYED_WORK(&d->cqm_limbo, cqm_handle_limbo);
-	}
-	if (is_mbm_total_enabled()) {
-		tsize = sizeof(*d->mbm_total);
-		d->mbm_total = kcalloc(r->num_rmid, tsize, GFP_KERNEL);
-		if (!d->mbm_total) {
-			bitmap_free(d->rmid_busy_llc);
-			return -ENOMEM;
-		}
-	}
-	if (is_mbm_local_enabled()) {
-		tsize = sizeof(*d->mbm_local);
-		d->mbm_local = kcalloc(r->num_rmid, tsize, GFP_KERNEL);
-		if (!d->mbm_local) {
-			bitmap_free(d->rmid_busy_llc);
-			kfree(d->mbm_total);
-			return -ENOMEM;
-		}
-	}
-
-	if (is_mbm_enabled()) {
-		INIT_DELAYED_WORK(&d->mbm_over, mbm_handle_overflow);
-		mbm_setup_overflow_handler(d, MBM_OVERFLOW_INTERVAL);
-	}
-
-	return 0;
-}
-
 /*
  * domain_add_cpu - Add a cpu to a resource's domain list.
  *
@@ -498,6 +462,7 @@ static void domain_add_cpu(int cpu, struct rdt_resource *r)
 	struct list_head *add_pos = NULL;
 	struct rdt_hw_domain *hw_dom;
 	struct rdt_domain *d;
+	int err;
 
 	d = rdt_find_domain(r, id, &add_pos);
 	if (IS_ERR(d)) {
@@ -527,21 +492,15 @@ static void domain_add_cpu(int cpu, struct rdt_resource *r)
 		return;
 	}
 
-	if (r->mon_capable && domain_setup_mon_state(r, d)) {
-		kfree(hw_dom->ctrl_val);
-		kfree(hw_dom->mbps_val);
-		kfree(hw_dom);
-		return;
-	}
-
 	list_add_tail(&d->list, add_pos);
 
-	/*
-	 * If resctrl is mounted, add
-	 * per domain monitor data directories.
-	 */
-	if (static_branch_unlikely(&rdt_mon_enable_key))
-		mkdir_mondata_subdir_allrdtgrp(r, d);
+	err = resctrl_online_domain(r, d);
+	if (err) {
+		list_del(&d->list);
+		kfree(hw_dom->ctrl_val);
+		kfree(hw_dom->mbps_val);
+		kfree(hw_dom);
+	}
 }
 
 static void domain_remove_cpu(int cpu, struct rdt_resource *r)
diff --git a/arch/x86/kernel/cpu/resctrl/internal.h b/arch/x86/kernel/cpu/resctrl/internal.h
index 8828b5c1b6d2..be48a682dbdb 100644
--- a/arch/x86/kernel/cpu/resctrl/internal.h
+++ b/arch/x86/kernel/cpu/resctrl/internal.h
@@ -524,8 +524,6 @@ void mon_event_count(void *info);
 int rdtgroup_mondata_show(struct seq_file *m, void *arg);
 void rmdir_mondata_subdir_allrdtgrp(struct rdt_resource *r,
 				    unsigned int dom_id);
-void mkdir_mondata_subdir_allrdtgrp(struct rdt_resource *r,
-				    struct rdt_domain *d);
 void mon_event_read(struct rmid_read *rr, struct rdt_resource *r,
 		    struct rdt_domain *d, struct rdtgroup *rdtgrp,
 		    int evtid, int first);
diff --git a/arch/x86/kernel/cpu/resctrl/rdtgroup.c b/arch/x86/kernel/cpu/resctrl/rdtgroup.c
index def7c6681f8b..030a70326ccc 100644
--- a/arch/x86/kernel/cpu/resctrl/rdtgroup.c
+++ b/arch/x86/kernel/cpu/resctrl/rdtgroup.c
@@ -2565,16 +2565,13 @@ static int mkdir_mondata_subdir(struct kernfs_node *parent_kn,
  * Add all subdirectories of mon_data for "ctrl_mon" groups
  * and "monitor" groups with given domain id.
  */
-void mkdir_mondata_subdir_allrdtgrp(struct rdt_resource *r,
-				    struct rdt_domain *d)
+static void mkdir_mondata_subdir_allrdtgrp(struct rdt_resource *r,
+					   struct rdt_domain *d)
 {
 	struct kernfs_node *parent_kn;
 	struct rdtgroup *prgrp, *crgrp;
 	struct list_head *head;
 
-	if (!r->mon_capable)
-		return;
-
 	list_for_each_entry(prgrp, &rdt_all_groups, rdtgroup_list) {
 		parent_kn = prgrp->mon.mon_data_kn;
 		mkdir_mondata_subdir(parent_kn, d, r, prgrp);
@@ -3236,6 +3233,64 @@ static int __init rdtgroup_setup_root(void)
 	return ret;
 }
 
+static int domain_setup_mon_state(struct rdt_resource *r, struct rdt_domain *d)
+{
+	size_t tsize;
+
+	if (is_llc_occupancy_enabled()) {
+		d->rmid_busy_llc = bitmap_zalloc(r->num_rmid, GFP_KERNEL);
+		if (!d->rmid_busy_llc)
+			return -ENOMEM;
+	}
+	if (is_mbm_total_enabled()) {
+		tsize = sizeof(*d->mbm_total);
+		d->mbm_total = kcalloc(r->num_rmid, tsize, GFP_KERNEL);
+		if (!d->mbm_total) {
+			bitmap_free(d->rmid_busy_llc);
+			return -ENOMEM;
+		}
+	}
+	if (is_mbm_local_enabled()) {
+		tsize = sizeof(*d->mbm_local);
+		d->mbm_local = kcalloc(r->num_rmid, tsize, GFP_KERNEL);
+		if (!d->mbm_local) {
+			bitmap_free(d->rmid_busy_llc);
+			kfree(d->mbm_total);
+			return -ENOMEM;
+		}
+	}
+
+	return 0;
+}
+
+int resctrl_online_domain(struct rdt_resource *r, struct rdt_domain *d)
+{
+	int err;
+
+	lockdep_assert_held(&rdtgroup_mutex);
+
+	if (!r->mon_capable)
+		return 0;
+
+	err = domain_setup_mon_state(r, d);
+	if (err)
+		return err;
+
+	if (is_mbm_enabled()) {
+		INIT_DELAYED_WORK(&d->mbm_over, mbm_handle_overflow);
+		mbm_setup_overflow_handler(d, MBM_OVERFLOW_INTERVAL);
+	}
+
+	if (is_llc_occupancy_enabled())
+		INIT_DELAYED_WORK(&d->cqm_limbo, cqm_handle_limbo);
+
+	/* If resctrl is mounted, add per domain monitor data directories. */
+	if (static_branch_unlikely(&rdt_mon_enable_key))
+		mkdir_mondata_subdir_allrdtgrp(r, d);
+
+	return 0;
+}
+
 /*
  * rdtgroup_init - rdtgroup initialization
  *
diff --git a/include/linux/resctrl.h b/include/linux/resctrl.h
index 8180c539800d..d512455b4c3a 100644
--- a/include/linux/resctrl.h
+++ b/include/linux/resctrl.h
@@ -192,5 +192,6 @@ u32 resctrl_arch_get_num_closid(struct rdt_resource *r);
 int resctrl_arch_update_domains(struct rdt_resource *r, u32 closid);
 u32 resctrl_arch_get_config(struct rdt_resource *r, struct rdt_domain *d,
 			    u32 closid, enum resctrl_conf_type type);
+int resctrl_online_domain(struct rdt_resource *r, struct rdt_domain *d);
 
 #endif /* _RESCTRL_H */
-- 
2.30.2

[PATCH v5 04/21] x86/resctrl: Group struct rdt_hw_domain cleanup

[James Morse]

domain_add_cpu() and domain_remove_cpu() need to kfree() the child
arrays that were allocated by domain_setup_ctrlval().

As this memory is moved around, and new arrays are created, adjusting
the error handling cleanup code becomes noisier.

To simplify this, move all the kfree() calls into a domain_free() helper.
This depends on struct rdt_hw_domain being kzalloc()d, allowing it to
unconditionally kfree() all the child arrays.

Reviewed-by: Jamie Iles <quic_jiles@quicinc.com>
Tested-by: Xin Hao <xhao@linux.alibaba.com>
Reviewed-by: Shaopeng Tan <tan.shaopeng@fujitsu.com>
Tested-by: Shaopeng Tan <tan.shaopeng@fujitsu.com>
Tested-by: Cristian Marussi <cristian.marussi@arm.com>
Signed-off-by: James Morse <james.morse@arm.com>
---
Changes since v2:
 * Made domain_free() static.

Changes since v1:
 * This patch is new
---
 arch/x86/kernel/cpu/resctrl/core.c | 17 ++++++++++-------
 1 file changed, 10 insertions(+), 7 deletions(-)

diff --git a/arch/x86/kernel/cpu/resctrl/core.c b/arch/x86/kernel/cpu/resctrl/core.c
index 25f30148478b..e37889f7a1a5 100644
--- a/arch/x86/kernel/cpu/resctrl/core.c
+++ b/arch/x86/kernel/cpu/resctrl/core.c
@@ -414,6 +414,13 @@ void setup_default_ctrlval(struct rdt_resource *r, u32 *dc, u32 *dm)
 	}
 }
 
+static void domain_free(struct rdt_hw_domain *hw_dom)
+{
+	kfree(hw_dom->ctrl_val);
+	kfree(hw_dom->mbps_val);
+	kfree(hw_dom);
+}
+
 static int domain_setup_ctrlval(struct rdt_resource *r, struct rdt_domain *d)
 {
 	struct rdt_hw_resource *hw_res = resctrl_to_arch_res(r);
@@ -488,7 +495,7 @@ static void domain_add_cpu(int cpu, struct rdt_resource *r)
 	rdt_domain_reconfigure_cdp(r);
 
 	if (r->alloc_capable && domain_setup_ctrlval(r, d)) {
-		kfree(hw_dom);
+		domain_free(hw_dom);
 		return;
 	}
 
@@ -497,9 +504,7 @@ static void domain_add_cpu(int cpu, struct rdt_resource *r)
 	err = resctrl_online_domain(r, d);
 	if (err) {
 		list_del(&d->list);
-		kfree(hw_dom->ctrl_val);
-		kfree(hw_dom->mbps_val);
-		kfree(hw_dom);
+		domain_free(hw_dom);
 	}
 }
 
@@ -547,12 +552,10 @@ static void domain_remove_cpu(int cpu, struct rdt_resource *r)
 		if (d->plr)
 			d->plr->d = NULL;
 
-		kfree(hw_dom->ctrl_val);
-		kfree(hw_dom->mbps_val);
 		bitmap_free(d->rmid_busy_llc);
 		kfree(d->mbm_total);
 		kfree(d->mbm_local);
-		kfree(hw_dom);
+		domain_free(hw_dom);
 		return;
 	}
 
-- 
2.30.2

[PATCH v5 05/21] x86/resctrl: Add domain offline callback for resctrl work

[James Morse]

Because domains are exposed to user-space via resctrl, the filesystem
must update its state when CPU hotplug callbacks are triggered.

Some of this work is common to any architecture that would support
resctrl, but the work is tied up with the architecture code to
free the memory.

Move the monitor subdir removal and the cancelling of the mbm/limbo
works into a new resctrl_offline_domain() call. These bits are not
specific to the architecture. Grouping them in one function allows
that code to be moved to /fs/ and re-used by another architecture.

Reviewed-by: Jamie Iles <quic_jiles@quicinc.com>
Tested-by: Xin Hao <xhao@linux.alibaba.com>
Reviewed-by: Shaopeng Tan <tan.shaopeng@fujitsu.com>
Tested-by: Shaopeng Tan <tan.shaopeng@fujitsu.com>
Tested-by: Cristian Marussi <cristian.marussi@arm.com>
Signed-off-by: James Morse <james.morse@arm.com>
---
Changes since v2:
 * Moved kfree()ing to domain_destroy_mon_state() for later re-use.

Changes since v1:
 * Removed a redundant mon_capable check
 * Capitalisation
 * Removed inline comment
 * Added to the commit message
---
 arch/x86/kernel/cpu/resctrl/core.c     | 26 ++-------------
 arch/x86/kernel/cpu/resctrl/internal.h |  2 --
 arch/x86/kernel/cpu/resctrl/rdtgroup.c | 45 +++++++++++++++++++++++---
 include/linux/resctrl.h                |  1 +
 4 files changed, 44 insertions(+), 30 deletions(-)

diff --git a/arch/x86/kernel/cpu/resctrl/core.c b/arch/x86/kernel/cpu/resctrl/core.c
index e37889f7a1a5..f69182973175 100644
--- a/arch/x86/kernel/cpu/resctrl/core.c
+++ b/arch/x86/kernel/cpu/resctrl/core.c
@@ -523,27 +523,8 @@ static void domain_remove_cpu(int cpu, struct rdt_resource *r)
 
 	cpumask_clear_cpu(cpu, &d->cpu_mask);
 	if (cpumask_empty(&d->cpu_mask)) {
-		/*
-		 * If resctrl is mounted, remove all the
-		 * per domain monitor data directories.
-		 */
-		if (static_branch_unlikely(&rdt_mon_enable_key))
-			rmdir_mondata_subdir_allrdtgrp(r, d->id);
+		resctrl_offline_domain(r, d);
 		list_del(&d->list);
-		if (r->mon_capable && is_mbm_enabled())
-			cancel_delayed_work(&d->mbm_over);
-		if (is_llc_occupancy_enabled() &&  has_busy_rmid(r, d)) {
-			/*
-			 * When a package is going down, forcefully
-			 * decrement rmid->ebusy. There is no way to know
-			 * that the L3 was flushed and hence may lead to
-			 * incorrect counts in rare scenarios, but leaving
-			 * the RMID as busy creates RMID leaks if the
-			 * package never comes back.
-			 */
-			__check_limbo(d, true);
-			cancel_delayed_work(&d->cqm_limbo);
-		}
 
 		/*
 		 * rdt_domain "d" is going to be freed below, so clear
@@ -551,11 +532,8 @@ static void domain_remove_cpu(int cpu, struct rdt_resource *r)
 		 */
 		if (d->plr)
 			d->plr->d = NULL;
-
-		bitmap_free(d->rmid_busy_llc);
-		kfree(d->mbm_total);
-		kfree(d->mbm_local);
 		domain_free(hw_dom);
+
 		return;
 	}
 
diff --git a/arch/x86/kernel/cpu/resctrl/internal.h b/arch/x86/kernel/cpu/resctrl/internal.h
index be48a682dbdb..e12b55f815bf 100644
--- a/arch/x86/kernel/cpu/resctrl/internal.h
+++ b/arch/x86/kernel/cpu/resctrl/internal.h
@@ -522,8 +522,6 @@ void free_rmid(u32 rmid);
 int rdt_get_mon_l3_config(struct rdt_resource *r);
 void mon_event_count(void *info);
 int rdtgroup_mondata_show(struct seq_file *m, void *arg);
-void rmdir_mondata_subdir_allrdtgrp(struct rdt_resource *r,
-				    unsigned int dom_id);
 void mon_event_read(struct rmid_read *rr, struct rdt_resource *r,
 		    struct rdt_domain *d, struct rdtgroup *rdtgrp,
 		    int evtid, int first);
diff --git a/arch/x86/kernel/cpu/resctrl/rdtgroup.c b/arch/x86/kernel/cpu/resctrl/rdtgroup.c
index 030a70326ccc..5830905a92d2 100644
--- a/arch/x86/kernel/cpu/resctrl/rdtgroup.c
+++ b/arch/x86/kernel/cpu/resctrl/rdtgroup.c
@@ -2499,14 +2499,12 @@ static int mon_addfile(struct kernfs_node *parent_kn, const char *name,
  * Remove all subdirectories of mon_data of ctrl_mon groups
  * and monitor groups with given domain id.
  */
-void rmdir_mondata_subdir_allrdtgrp(struct rdt_resource *r, unsigned int dom_id)
+static void rmdir_mondata_subdir_allrdtgrp(struct rdt_resource *r,
+					   unsigned int dom_id)
 {
 	struct rdtgroup *prgrp, *crgrp;
 	char name[32];
 
-	if (!r->mon_capable)
-		return;
-
 	list_for_each_entry(prgrp, &rdt_all_groups, rdtgroup_list) {
 		sprintf(name, "mon_%s_%02d", r->name, dom_id);
 		kernfs_remove_by_name(prgrp->mon.mon_data_kn, name);
@@ -3233,6 +3231,45 @@ static int __init rdtgroup_setup_root(void)
 	return ret;
 }
 
+static void domain_destroy_mon_state(struct rdt_domain *d)
+{
+	bitmap_free(d->rmid_busy_llc);
+	kfree(d->mbm_total);
+	kfree(d->mbm_local);
+}
+
+void resctrl_offline_domain(struct rdt_resource *r, struct rdt_domain *d)
+{
+	lockdep_assert_held(&rdtgroup_mutex);
+
+	if (!r->mon_capable)
+		return;
+
+	/*
+	 * If resctrl is mounted, remove all the
+	 * per domain monitor data directories.
+	 */
+	if (static_branch_unlikely(&rdt_mon_enable_key))
+		rmdir_mondata_subdir_allrdtgrp(r, d->id);
+
+	if (is_mbm_enabled())
+		cancel_delayed_work(&d->mbm_over);
+	if (is_llc_occupancy_enabled() && has_busy_rmid(r, d)) {
+		/*
+		 * When a package is going down, forcefully
+		 * decrement rmid->ebusy. There is no way to know
+		 * that the L3 was flushed and hence may lead to
+		 * incorrect counts in rare scenarios, but leaving
+		 * the RMID as busy creates RMID leaks if the
+		 * package never comes back.
+		 */
+		__check_limbo(d, true);
+		cancel_delayed_work(&d->cqm_limbo);
+	}
+
+	domain_destroy_mon_state(d);
+}
+
 static int domain_setup_mon_state(struct rdt_resource *r, struct rdt_domain *d)
 {
 	size_t tsize;
diff --git a/include/linux/resctrl.h b/include/linux/resctrl.h
index d512455b4c3a..5d283bdd6162 100644
--- a/include/linux/resctrl.h
+++ b/include/linux/resctrl.h
@@ -193,5 +193,6 @@ int resctrl_arch_update_domains(struct rdt_resource *r, u32 closid);
 u32 resctrl_arch_get_config(struct rdt_resource *r, struct rdt_domain *d,
 			    u32 closid, enum resctrl_conf_type type);
 int resctrl_online_domain(struct rdt_resource *r, struct rdt_domain *d);
+void resctrl_offline_domain(struct rdt_resource *r, struct rdt_domain *d);
 
 #endif /* _RESCTRL_H */
-- 
2.30.2

[PATCH v5 06/21] x86/resctrl: Remove set_mba_sc()s control array re-initialisation

[James Morse]

set_mba_sc() enables the 'software controller' to regulate the
bandwidth based on the byte counters. This can be managed entirely
in the parts of resctrl that move to /fs/, without any extra
support from the architecture specific code.
set_mba_sc() is called by rdt_enable_ctx() during mount and
umount. It currently resets the arch code's ctrl_val[] and mbps_val[]
arrays.

The ctrl_val[] was already reset when the domain was created,
and by reset_all_ctrls() when the filesystem was last umounted.
Doing the work in set_mba_sc() is not necessary as the values are
already at their defaults due to the creation of the domain, or were
previously reset during umount(), or are about to reset during umount().

Add a reset of the mbps_val[] in reset_all_ctrls(), allowing the
code in set_mba_sc() that reaches in to the architecture specific
structures to be removed.

Reviewed-by: Jamie Iles <quic_jiles@quicinc.com>
Tested-by: Xin Hao <xhao@linux.alibaba.com>
Reviewed-by: Shaopeng Tan <tan.shaopeng@fujitsu.com>
Tested-by: Shaopeng Tan <tan.shaopeng@fujitsu.com>
Tested-by: Cristian Marussi <cristian.marussi@arm.com>
Signed-off-by: James Morse <james.morse@arm.com>
---
Changes since v3:
 * Spelling mistakes in commit message.

Changes since v2:
 * Moved earlier in the series, added the reset in reset_all_ctrls().
 * Rephrased commit message.
---
 arch/x86/kernel/cpu/resctrl/rdtgroup.c | 10 +++-------
 1 file changed, 3 insertions(+), 7 deletions(-)

diff --git a/arch/x86/kernel/cpu/resctrl/rdtgroup.c b/arch/x86/kernel/cpu/resctrl/rdtgroup.c
index 5830905a92d2..b32ceff8325a 100644
--- a/arch/x86/kernel/cpu/resctrl/rdtgroup.c
+++ b/arch/x86/kernel/cpu/resctrl/rdtgroup.c
@@ -1898,18 +1898,12 @@ void rdt_domain_reconfigure_cdp(struct rdt_resource *r)
 static int set_mba_sc(bool mba_sc)
 {
 	struct rdt_resource *r = &rdt_resources_all[RDT_RESOURCE_MBA].r_resctrl;
-	struct rdt_hw_domain *hw_dom;
-	struct rdt_domain *d;
 
 	if (!is_mbm_enabled() || !is_mba_linear() ||
 	    mba_sc == is_mba_sc(r))
 		return -EINVAL;
 
 	r->membw.mba_sc = mba_sc;
-	list_for_each_entry(d, &r->domains, list) {
-		hw_dom = resctrl_to_arch_dom(d);
-		setup_default_ctrlval(r, hw_dom->ctrl_val, hw_dom->mbps_val);
-	}
 
 	return 0;
 }
@@ -2327,8 +2321,10 @@ static int reset_all_ctrls(struct rdt_resource *r)
 		hw_dom = resctrl_to_arch_dom(d);
 		cpumask_set_cpu(cpumask_any(&d->cpu_mask), cpu_mask);
 
-		for (i = 0; i < hw_res->num_closid; i++)
+		for (i = 0; i < hw_res->num_closid; i++) {
 			hw_dom->ctrl_val[i] = r->default_ctrl;
+			hw_dom->mbps_val[i] = MBA_MAX_MBPS;
+		}
 	}
 	cpu = get_cpu();
 	/* Update CBM on this cpu if it's in cpu_mask. */
-- 
2.30.2

[PATCH v5 07/21] x86/resctrl: Abstract and use supports_mba_mbps()

[James Morse]

To determine whether the mba_MBps option to resctrl should be supported,
resctrl tests the boot CPUs' x86_vendor.

This isn't portable, and needs abstracting behind a helper so this check
can be part of the filesystem code that moves to /fs/.

Re-use the tests set_mba_sc() does to determine if the mba_sc is supported
on this system. An 'alloc_capable' test is added so that support for the
controls isn't implied by the 'delay_linear' property, which is always
true for MPAM.

Reviewed-by: Jamie Iles <quic_jiles@quicinc.com>
Tested-by: Xin Hao <xhao@linux.alibaba.com>
Reviewed-by: Shaopeng Tan <tan.shaopeng@fujitsu.com>
Tested-by: Shaopeng Tan <tan.shaopeng@fujitsu.com>
Tested-by: Cristian Marussi <cristian.marussi@arm.com>
Signed-off-by: James Morse <james.morse@arm.com>
---
Changes since v3:
 * Added use in resctrle_online_domain()

Changes since v1:
 * Capitalisation
 * Added MPAM example in commit message
 * Fixed supports_mba_mbps() logic error in rdt_parse_param()
---
 arch/x86/kernel/cpu/resctrl/rdtgroup.c | 19 ++++++++++++++-----
 1 file changed, 14 insertions(+), 5 deletions(-)

diff --git a/arch/x86/kernel/cpu/resctrl/rdtgroup.c b/arch/x86/kernel/cpu/resctrl/rdtgroup.c
index b32ceff8325a..49d9e2c3c743 100644
--- a/arch/x86/kernel/cpu/resctrl/rdtgroup.c
+++ b/arch/x86/kernel/cpu/resctrl/rdtgroup.c
@@ -1890,17 +1890,26 @@ void rdt_domain_reconfigure_cdp(struct rdt_resource *r)
 }
 
 /*
- * Enable or disable the MBA software controller
- * which helps user specify bandwidth in MBps.
  * MBA software controller is supported only if
  * MBM is supported and MBA is in linear scale.
  */
+static bool supports_mba_mbps(void)
+{
+	struct rdt_resource *r = &rdt_resources_all[RDT_RESOURCE_MBA].r_resctrl;
+
+	return (is_mbm_enabled() &&
+		r->alloc_capable && is_mba_linear());
+}
+
+/*
+ * Enable or disable the MBA software controller
+ * which helps user specify bandwidth in MBps.
+ */
 static int set_mba_sc(bool mba_sc)
 {
 	struct rdt_resource *r = &rdt_resources_all[RDT_RESOURCE_MBA].r_resctrl;
 
-	if (!is_mbm_enabled() || !is_mba_linear() ||
-	    mba_sc == is_mba_sc(r))
+	if (!supports_mba_mbps() || mba_sc == is_mba_sc(r))
 		return -EINVAL;
 
 	r->membw.mba_sc = mba_sc;
@@ -2255,7 +2264,7 @@ static int rdt_parse_param(struct fs_context *fc, struct fs_parameter *param)
 		ctx->enable_cdpl2 = true;
 		return 0;
 	case Opt_mba_mbps:
-		if (boot_cpu_data.x86_vendor != X86_VENDOR_INTEL)
+		if (!supports_mba_mbps())
 			return -EINVAL;
 		ctx->enable_mba_mbps = true;
 		return 0;
-- 
2.30.2

[PATCH v5 08/21] x86/resctrl: Create mba_sc configuration in the rdt_domain

[James Morse]

To support resctrl's MBA software controller, the architecture must provide
a second configuration array to hold the mbps_val[] from user-space.

This complicates the interface between the architecture specific code and
the filesystem portions of resctrl that will move to /fs/, to allow
multiple architectures to support resctrl.

Make the filesystem parts of resctrl create an array for the mba_sc
values. The software controller can be changed to use this, allowing
the architecture code to only consider the values configured in hardware.

Reviewed-by: Jamie Iles <quic_jiles@quicinc.com>
Tested-by: Xin Hao <xhao@linux.alibaba.com>
Reviewed-by: Shaopeng Tan <tan.shaopeng@fujitsu.com>
Tested-by: Shaopeng Tan <tan.shaopeng@fujitsu.com>
Tested-by: Cristian Marussi <cristian.marussi@arm.com>
Signed-off-by: James Morse <james.morse@arm.com>
---
Changes since v4:
 * Use supports_mba_mbps() in resctrl_{on,off}line_domain().
 * Don't call mba_sc_domain_destroy() for error handling - it can't happen.
 * Whitespace.

Changes since v3:
 * Always allocate the array.
 * Move the array allocation above the r->mon_capable check.

Changes since v2:
 * Split patch in two, the liftime parts are a separate patch.
 * Added reset in set_mba_sc() now that we can't depend on the lifetime.
 * Initialise ret in mba_sc_allocate(),
 * Made mbps_val allocation/freeing symmetric for cpuhp calls.
 * Removed reference to squashed-out struct.
 * Preserved kerneldoc for mbps_val.

Changes since v1:
 * Added missing error handling to mba_sc_domain_allocate() in
   domain_setup_mon_state()
 * Added comment about mba_sc_domain_allocate() races
 * Squashed out struct resctrl_mba_sc
 * Moved mount time alloc/free calls to set_mba_sc().
 * Removed mount check in resctrl_offline_domain()
 * Reword commit message
---
 arch/x86/kernel/cpu/resctrl/internal.h |  1 -
 arch/x86/kernel/cpu/resctrl/rdtgroup.c | 39 ++++++++++++++++++++++++++
 include/linux/resctrl.h                |  7 +++++
 3 files changed, 46 insertions(+), 1 deletion(-)

diff --git a/arch/x86/kernel/cpu/resctrl/internal.h b/arch/x86/kernel/cpu/resctrl/internal.h
index e12b55f815bf..a7e2cbce29d5 100644
--- a/arch/x86/kernel/cpu/resctrl/internal.h
+++ b/arch/x86/kernel/cpu/resctrl/internal.h
@@ -36,7 +36,6 @@
 #define MBM_OVERFLOW_INTERVAL		1000
 #define MAX_MBA_BW			100u
 #define MBA_IS_LINEAR			0x4
-#define MBA_MAX_MBPS			U32_MAX
 #define MAX_MBA_BW_AMD			0x800
 #define MBM_CNTR_WIDTH_OFFSET_AMD	20
 
diff --git a/arch/x86/kernel/cpu/resctrl/rdtgroup.c b/arch/x86/kernel/cpu/resctrl/rdtgroup.c
index 49d9e2c3c743..bb1faf4f5b38 100644
--- a/arch/x86/kernel/cpu/resctrl/rdtgroup.c
+++ b/arch/x86/kernel/cpu/resctrl/rdtgroup.c
@@ -1889,6 +1889,30 @@ void rdt_domain_reconfigure_cdp(struct rdt_resource *r)
 		l3_qos_cfg_update(&hw_res->cdp_enabled);
 }
 
+static int mba_sc_domain_allocate(struct rdt_resource *r, struct rdt_domain *d)
+{
+	u32 num_closid = resctrl_arch_get_num_closid(r);
+	int cpu = cpumask_any(&d->cpu_mask);
+	int i;
+
+	d->mbps_val = kcalloc_node(num_closid, sizeof(*d->mbps_val),
+				   GFP_KERNEL, cpu_to_node(cpu));
+	if (!d->mbps_val)
+		return -ENOMEM;
+
+	for (i = 0; i < num_closid; i++)
+		d->mbps_val[i] = MBA_MAX_MBPS;
+
+	return 0;
+}
+
+static void mba_sc_domain_destroy(struct rdt_resource *r,
+				  struct rdt_domain *d)
+{
+	kfree(d->mbps_val);
+	d->mbps_val = NULL;
+}
+
 /*
  * MBA software controller is supported only if
  * MBM is supported and MBA is in linear scale.
@@ -1908,12 +1932,20 @@ static bool supports_mba_mbps(void)
 static int set_mba_sc(bool mba_sc)
 {
 	struct rdt_resource *r = &rdt_resources_all[RDT_RESOURCE_MBA].r_resctrl;
+	u32 num_closid = resctrl_arch_get_num_closid(r);
+	struct rdt_domain *d;
+	int i;
 
 	if (!supports_mba_mbps() || mba_sc == is_mba_sc(r))
 		return -EINVAL;
 
 	r->membw.mba_sc = mba_sc;
 
+	list_for_each_entry(d, &r->domains, list) {
+		for (i = 0; i < num_closid; i++)
+			d->mbps_val[i] = MBA_MAX_MBPS;
+	}
+
 	return 0;
 }
 
@@ -3247,6 +3279,9 @@ void resctrl_offline_domain(struct rdt_resource *r, struct rdt_domain *d)
 {
 	lockdep_assert_held(&rdtgroup_mutex);
 
+	if (supports_mba_mbps() && r->rid == RDT_RESOURCE_MBA)
+		mba_sc_domain_destroy(r, d);
+
 	if (!r->mon_capable)
 		return;
 
@@ -3311,6 +3346,10 @@ int resctrl_online_domain(struct rdt_resource *r, struct rdt_domain *d)
 
 	lockdep_assert_held(&rdtgroup_mutex);
 
+	if (supports_mba_mbps() && r->rid == RDT_RESOURCE_MBA)
+		/* RDT_RESOURCE_MBA is never mon_capable */
+		return mba_sc_domain_allocate(r, d);
+
 	if (!r->mon_capable)
 		return 0;
 
diff --git a/include/linux/resctrl.h b/include/linux/resctrl.h
index 5d283bdd6162..93dfe553b364 100644
--- a/include/linux/resctrl.h
+++ b/include/linux/resctrl.h
@@ -15,6 +15,9 @@ int proc_resctrl_show(struct seq_file *m,
 
 #endif
 
+/* max value for struct rdt_domain's mbps_val */
+#define MBA_MAX_MBPS   U32_MAX
+
 /**
  * enum resctrl_conf_type - The type of configuration.
  * @CDP_NONE:	No prioritisation, both code and data are controlled or monitored.
@@ -53,6 +56,9 @@ struct resctrl_staged_config {
  * @cqm_work_cpu:	worker CPU for CQM h/w counters
  * @plr:		pseudo-locked region (if any) associated with domain
  * @staged_config:	parsed configuration to be applied
+ * @mbps_val:		When mba_sc is enabled, this holds the array of user
+ *			specified control values for mba_sc in MBps, indexed
+ *			by closid
  */
 struct rdt_domain {
 	struct list_head		list;
@@ -67,6 +73,7 @@ struct rdt_domain {
 	int				cqm_work_cpu;
 	struct pseudo_lock_region	*plr;
 	struct resctrl_staged_config	staged_config[CDP_NUM_TYPES];
+	u32				*mbps_val;
 };
 
 /**
-- 
2.30.2

[PATCH v5 09/21] x86/resctrl: Switch over to the resctrl mbps_val list

[James Morse]

Updates to resctrl's software controller follow the same path as
other configuration updates, but they don't modify the hardware state.
rdtgroup_schemata_write() uses parse_line() and the resource's
parse_ctrlval() function to stage the configuration.
resctrl_arch_update_domains() then updates the mbps_val[] array
instead, and resctrl_arch_update_domains() skips the rdt_ctrl_update()
call that would update hardware.

This complicates the interface between resctrl's filesystem parts
and architecture specific code. It should be possible for mba_sc
to be completely implemented by the filesystem parts of resctrl. This
would allow it to work on a second architecture with no additional code.
resctrl_arch_update_domains() using the mbps_val[] array prevents this.

Change parse_bw() to write the configuration value directly to the
mbps_val[] array in the domain structure. Change rdtgroup_schemata_write()
to skip the call to resctrl_arch_update_domains(), meaning all the
mba_sc specific code in resctrl_arch_update_domains() can be removed.
On the read-side, show_doms() and update_mba_bw() are changed to read
the mbps_val[] array from the domain structure. With this,
resctrl_arch_get_config() no longer needs to consider mba_sc resources.

Reviewed-by: Jamie Iles <quic_jiles@quicinc.com>
Tested-by: Xin Hao <xhao@linux.alibaba.com>
Reviewed-by: Shaopeng Tan <tan.shaopeng@fujitsu.com>
Tested-by: Shaopeng Tan <tan.shaopeng@fujitsu.com>
Tested-by: Cristian Marussi <cristian.marussi@arm.com>
Signed-off-by: James Morse <james.morse@arm.com>
---
Changes since v4:
 * Wording of comments.
 * Restored mbps_val[] reset code to set_mba_sc().
 * Moved mbps_val[] reset in rdtgroup_init_mba() to reduce noise.

Changes since v3:
 * Added the rdtgroup_init_mba() hunk to avoid ~0 being written
   to the ctrl_val array, and to only reset mbps_val[] when its going
   to be used.

Changes since v2:
 * Fixed some names in the commit message.
 * Added missing 'or mbps_val[]' code to rdtgroup_size_show()

Changes since v1:
 * Squashed out struct resctrl_mba_sc
 * Removed stray paragraphs from commit message
---
 arch/x86/kernel/cpu/resctrl/ctrlmondata.c | 44 ++++++++++++++---------
 arch/x86/kernel/cpu/resctrl/monitor.c     | 10 +++---
 arch/x86/kernel/cpu/resctrl/rdtgroup.c    | 27 ++++++++++----
 3 files changed, 52 insertions(+), 29 deletions(-)

diff --git a/arch/x86/kernel/cpu/resctrl/ctrlmondata.c b/arch/x86/kernel/cpu/resctrl/ctrlmondata.c
index 87666275eed9..9f45207a6c74 100644
--- a/arch/x86/kernel/cpu/resctrl/ctrlmondata.c
+++ b/arch/x86/kernel/cpu/resctrl/ctrlmondata.c
@@ -61,6 +61,7 @@ int parse_bw(struct rdt_parse_data *data, struct resctrl_schema *s,
 	     struct rdt_domain *d)
 {
 	struct resctrl_staged_config *cfg;
+	u32 closid = data->rdtgrp->closid;
 	struct rdt_resource *r = s->res;
 	unsigned long bw_val;
 
@@ -72,6 +73,12 @@ int parse_bw(struct rdt_parse_data *data, struct resctrl_schema *s,
 
 	if (!bw_validate(data->buf, &bw_val, r))
 		return -EINVAL;
+
+	if (is_mba_sc(r)) {
+		d->mbps_val[closid] = bw_val;
+		return 0;
+	}
+
 	cfg->new_ctrl = bw_val;
 	cfg->have_new_ctrl = true;
 
@@ -261,14 +268,13 @@ static u32 get_config_index(u32 closid, enum resctrl_conf_type type)
 
 static bool apply_config(struct rdt_hw_domain *hw_dom,
 			 struct resctrl_staged_config *cfg, u32 idx,
-			 cpumask_var_t cpu_mask, bool mba_sc)
+			 cpumask_var_t cpu_mask)
 {
 	struct rdt_domain *dom = &hw_dom->d_resctrl;
-	u32 *dc = !mba_sc ? hw_dom->ctrl_val : hw_dom->mbps_val;
 
-	if (cfg->new_ctrl != dc[idx]) {
+	if (cfg->new_ctrl != hw_dom->ctrl_val[idx]) {
 		cpumask_set_cpu(cpumask_any(&dom->cpu_mask), cpu_mask);
-		dc[idx] = cfg->new_ctrl;
+		hw_dom->ctrl_val[idx] = cfg->new_ctrl;
 
 		return true;
 	}
@@ -284,14 +290,12 @@ int resctrl_arch_update_domains(struct rdt_resource *r, u32 closid)
 	enum resctrl_conf_type t;
 	cpumask_var_t cpu_mask;
 	struct rdt_domain *d;
-	bool mba_sc;
 	int cpu;
 	u32 idx;
 
 	if (!zalloc_cpumask_var(&cpu_mask, GFP_KERNEL))
 		return -ENOMEM;
 
-	mba_sc = is_mba_sc(r);
 	msr_param.res = NULL;
 	list_for_each_entry(d, &r->domains, list) {
 		hw_dom = resctrl_to_arch_dom(d);
@@ -301,7 +305,7 @@ int resctrl_arch_update_domains(struct rdt_resource *r, u32 closid)
 				continue;
 
 			idx = get_config_index(closid, t);
-			if (!apply_config(hw_dom, cfg, idx, cpu_mask, mba_sc))
+			if (!apply_config(hw_dom, cfg, idx, cpu_mask))
 				continue;
 
 			if (!msr_param.res) {
@@ -315,11 +319,7 @@ int resctrl_arch_update_domains(struct rdt_resource *r, u32 closid)
 		}
 	}
 
-	/*
-	 * Avoid writing the control msr with control values when
-	 * MBA software controller is enabled
-	 */
-	if (cpumask_empty(cpu_mask) || mba_sc)
+	if (cpumask_empty(cpu_mask))
 		goto done;
 	cpu = get_cpu();
 	/* Update resource control msr on this CPU if it's in cpu_mask. */
@@ -406,6 +406,14 @@ ssize_t rdtgroup_schemata_write(struct kernfs_open_file *of,
 
 	list_for_each_entry(s, &resctrl_schema_all, list) {
 		r = s->res;
+
+		/*
+		 * Writes to mba_sc resources update the software controller,
+		 * not the control msr.
+		 */
+		if (is_mba_sc(r))
+			continue;
+
 		ret = resctrl_arch_update_domains(r, rdtgrp->closid);
 		if (ret)
 			goto out;
@@ -433,9 +441,7 @@ u32 resctrl_arch_get_config(struct rdt_resource *r, struct rdt_domain *d,
 	struct rdt_hw_domain *hw_dom = resctrl_to_arch_dom(d);
 	u32 idx = get_config_index(closid, type);
 
-	if (!is_mba_sc(r))
-		return hw_dom->ctrl_val[idx];
-	return hw_dom->mbps_val[idx];
+	return hw_dom->ctrl_val[idx];
 }
 
 static void show_doms(struct seq_file *s, struct resctrl_schema *schema, int closid)
@@ -450,8 +456,12 @@ static void show_doms(struct seq_file *s, struct resctrl_schema *schema, int clo
 		if (sep)
 			seq_puts(s, ";");
 
-		ctrl_val = resctrl_arch_get_config(r, dom, closid,
-						   schema->conf_type);
+		if (is_mba_sc(r))
+			ctrl_val = dom->mbps_val[closid];
+		else
+			ctrl_val = resctrl_arch_get_config(r, dom, closid,
+							   schema->conf_type);
+
 		seq_printf(s, r->format_str, dom->id, max_data_width,
 			   ctrl_val);
 		sep = true;
diff --git a/arch/x86/kernel/cpu/resctrl/monitor.c b/arch/x86/kernel/cpu/resctrl/monitor.c
index 497cadf3285d..16028b2f756a 100644
--- a/arch/x86/kernel/cpu/resctrl/monitor.c
+++ b/arch/x86/kernel/cpu/resctrl/monitor.c
@@ -447,13 +447,11 @@ static void update_mba_bw(struct rdtgroup *rgrp, struct rdt_domain *dom_mbm)
 	hw_dom_mba = resctrl_to_arch_dom(dom_mba);
 
 	cur_bw = pmbm_data->prev_bw;
-	user_bw = resctrl_arch_get_config(r_mba, dom_mba, closid, CDP_NONE);
+	user_bw = dom_mba->mbps_val[closid];
 	delta_bw = pmbm_data->delta_bw;
-	/*
-	 * resctrl_arch_get_config() chooses the mbps/ctrl value to return
-	 * based on is_mba_sc(). For now, reach into the hw_dom.
-	 */
-	cur_msr_val = hw_dom_mba->ctrl_val[closid];
+
+	/* MBA resource doesn't support CDP */
+	cur_msr_val = resctrl_arch_get_config(r_mba, dom_mba, closid, CDP_NONE);
 
 	/*
 	 * For Ctrl groups read data from child monitor groups.
diff --git a/arch/x86/kernel/cpu/resctrl/rdtgroup.c b/arch/x86/kernel/cpu/resctrl/rdtgroup.c
index bb1faf4f5b38..2b43bb9a9b76 100644
--- a/arch/x86/kernel/cpu/resctrl/rdtgroup.c
+++ b/arch/x86/kernel/cpu/resctrl/rdtgroup.c
@@ -1356,11 +1356,13 @@ static int rdtgroup_size_show(struct kernfs_open_file *of,
 			      struct seq_file *s, void *v)
 {
 	struct resctrl_schema *schema;
+	enum resctrl_conf_type type;
 	struct rdtgroup *rdtgrp;
 	struct rdt_resource *r;
 	struct rdt_domain *d;
 	unsigned int size;
 	int ret = 0;
+	u32 closid;
 	bool sep;
 	u32 ctrl;
 
@@ -1386,8 +1388,11 @@ static int rdtgroup_size_show(struct kernfs_open_file *of,
 		goto out;
 	}
 
+	closid = rdtgrp->closid;
+
 	list_for_each_entry(schema, &resctrl_schema_all, list) {
 		r = schema->res;
+		type = schema->conf_type;
 		sep = false;
 		seq_printf(s, "%*s:", max_name_width, schema->name);
 		list_for_each_entry(d, &r->domains, list) {
@@ -1396,9 +1401,12 @@ static int rdtgroup_size_show(struct kernfs_open_file *of,
 			if (rdtgrp->mode == RDT_MODE_PSEUDO_LOCKSETUP) {
 				size = 0;
 			} else {
-				ctrl = resctrl_arch_get_config(r, d,
-							       rdtgrp->closid,
-							       schema->conf_type);
+				if (is_mba_sc(r))
+					ctrl = d->mbps_val[closid];
+				else
+					ctrl = resctrl_arch_get_config(r, d,
+								       closid,
+								       type);
 				if (r->rid == RDT_RESOURCE_MBA)
 					size = ctrl;
 				else
@@ -2818,14 +2826,19 @@ static int rdtgroup_init_cat(struct resctrl_schema *s, u32 closid)
 }
 
 /* Initialize MBA resource with default values. */
-static void rdtgroup_init_mba(struct rdt_resource *r)
+static void rdtgroup_init_mba(struct rdt_resource *r, u32 closid)
 {
 	struct resctrl_staged_config *cfg;
 	struct rdt_domain *d;
 
 	list_for_each_entry(d, &r->domains, list) {
+		if (is_mba_sc(r)) {
+			d->mbps_val[closid] = MBA_MAX_MBPS;
+			continue;
+		}
+
 		cfg = &d->staged_config[CDP_NONE];
-		cfg->new_ctrl = is_mba_sc(r) ? MBA_MAX_MBPS : r->default_ctrl;
+		cfg->new_ctrl = r->default_ctrl;
 		cfg->have_new_ctrl = true;
 	}
 }
@@ -2840,7 +2853,9 @@ static int rdtgroup_init_alloc(struct rdtgroup *rdtgrp)
 	list_for_each_entry(s, &resctrl_schema_all, list) {
 		r = s->res;
 		if (r->rid == RDT_RESOURCE_MBA) {
-			rdtgroup_init_mba(r);
+			rdtgroup_init_mba(r, rdtgrp->closid);
+			if (is_mba_sc(r))
+				continue;
 		} else {
 			ret = rdtgroup_init_cat(s, rdtgrp->closid);
 			if (ret < 0)
-- 
2.30.2

[PATCH v5 10/21] x86/resctrl: Remove architecture copy of mbps_val

[James Morse]

The resctrl arch code provides a second configuration array mbps_val[]
for the MBA software controller.

Since resctrl switched over to allocating and freeing its own array
when needed, nothing uses the arch code version.

Remove it.

Reviewed-by: Jamie Iles <quic_jiles@quicinc.com>
Tested-by: Xin Hao <xhao@linux.alibaba.com>
Reviewed-by: Shaopeng Tan <tan.shaopeng@fujitsu.com>
Tested-by: Shaopeng Tan <tan.shaopeng@fujitsu.com>
Tested-by: Cristian Marussi <cristian.marussi@arm.com>
Signed-off-by: James Morse <james.morse@arm.com>
---
Changes since v2:
 * Made setup_default_ctrlval() static.

Changes since v1:
 * Fixed spelling mistake
 * Capitalisation
---
 arch/x86/kernel/cpu/resctrl/core.c     | 20 ++++----------------
 arch/x86/kernel/cpu/resctrl/internal.h |  3 ---
 arch/x86/kernel/cpu/resctrl/rdtgroup.c |  4 +---
 3 files changed, 5 insertions(+), 22 deletions(-)

diff --git a/arch/x86/kernel/cpu/resctrl/core.c b/arch/x86/kernel/cpu/resctrl/core.c
index f69182973175..f0e2820af475 100644
--- a/arch/x86/kernel/cpu/resctrl/core.c
+++ b/arch/x86/kernel/cpu/resctrl/core.c
@@ -397,7 +397,7 @@ struct rdt_domain *rdt_find_domain(struct rdt_resource *r, int id,
 	return NULL;
 }
 
-void setup_default_ctrlval(struct rdt_resource *r, u32 *dc, u32 *dm)
+static void setup_default_ctrlval(struct rdt_resource *r, u32 *dc)
 {
 	struct rdt_hw_resource *hw_res = resctrl_to_arch_res(r);
 	int i;
@@ -406,18 +406,14 @@ void setup_default_ctrlval(struct rdt_resource *r, u32 *dc, u32 *dm)
 	 * Initialize the Control MSRs to having no control.
 	 * For Cache Allocation: Set all bits in cbm
 	 * For Memory Allocation: Set b/w requested to 100%
-	 * and the bandwidth in MBps to U32_MAX
 	 */
-	for (i = 0; i < hw_res->num_closid; i++, dc++, dm++) {
+	for (i = 0; i < hw_res->num_closid; i++, dc++)
 		*dc = r->default_ctrl;
-		*dm = MBA_MAX_MBPS;
-	}
 }
 
 static void domain_free(struct rdt_hw_domain *hw_dom)
 {
 	kfree(hw_dom->ctrl_val);
-	kfree(hw_dom->mbps_val);
 	kfree(hw_dom);
 }
 
@@ -426,23 +422,15 @@ static int domain_setup_ctrlval(struct rdt_resource *r, struct rdt_domain *d)
 	struct rdt_hw_resource *hw_res = resctrl_to_arch_res(r);
 	struct rdt_hw_domain *hw_dom = resctrl_to_arch_dom(d);
 	struct msr_param m;
-	u32 *dc, *dm;
+	u32 *dc;
 
 	dc = kmalloc_array(hw_res->num_closid, sizeof(*hw_dom->ctrl_val),
 			   GFP_KERNEL);
 	if (!dc)
 		return -ENOMEM;
 
-	dm = kmalloc_array(hw_res->num_closid, sizeof(*hw_dom->mbps_val),
-			   GFP_KERNEL);
-	if (!dm) {
-		kfree(dc);
-		return -ENOMEM;
-	}
-
 	hw_dom->ctrl_val = dc;
-	hw_dom->mbps_val = dm;
-	setup_default_ctrlval(r, dc, dm);
+	setup_default_ctrlval(r, dc);
 
 	m.low = 0;
 	m.high = hw_res->num_closid;
diff --git a/arch/x86/kernel/cpu/resctrl/internal.h b/arch/x86/kernel/cpu/resctrl/internal.h
index a7e2cbce29d5..373aaba53ecd 100644
--- a/arch/x86/kernel/cpu/resctrl/internal.h
+++ b/arch/x86/kernel/cpu/resctrl/internal.h
@@ -308,14 +308,12 @@ struct mbm_state {
  *			  a resource
  * @d_resctrl:	Properties exposed to the resctrl file system
  * @ctrl_val:	array of cache or mem ctrl values (indexed by CLOSID)
- * @mbps_val:	When mba_sc is enabled, this holds the bandwidth in MBps
  *
  * Members of this structure are accessed via helpers that provide abstraction.
  */
 struct rdt_hw_domain {
 	struct rdt_domain		d_resctrl;
 	u32				*ctrl_val;
-	u32				*mbps_val;
 };
 
 static inline struct rdt_hw_domain *resctrl_to_arch_dom(struct rdt_domain *r)
@@ -529,7 +527,6 @@ void mbm_setup_overflow_handler(struct rdt_domain *dom,
 void mbm_handle_overflow(struct work_struct *work);
 void __init intel_rdt_mbm_apply_quirk(void);
 bool is_mba_sc(struct rdt_resource *r);
-void setup_default_ctrlval(struct rdt_resource *r, u32 *dc, u32 *dm);
 u32 delay_bw_map(unsigned long bw, struct rdt_resource *r);
 void cqm_setup_limbo_handler(struct rdt_domain *dom, unsigned long delay_ms);
 void cqm_handle_limbo(struct work_struct *work);
diff --git a/arch/x86/kernel/cpu/resctrl/rdtgroup.c b/arch/x86/kernel/cpu/resctrl/rdtgroup.c
index 2b43bb9a9b76..572fc07c9608 100644
--- a/arch/x86/kernel/cpu/resctrl/rdtgroup.c
+++ b/arch/x86/kernel/cpu/resctrl/rdtgroup.c
@@ -2370,10 +2370,8 @@ static int reset_all_ctrls(struct rdt_resource *r)
 		hw_dom = resctrl_to_arch_dom(d);
 		cpumask_set_cpu(cpumask_any(&d->cpu_mask), cpu_mask);
 
-		for (i = 0; i < hw_res->num_closid; i++) {
+		for (i = 0; i < hw_res->num_closid; i++)
 			hw_dom->ctrl_val[i] = r->default_ctrl;
-			hw_dom->mbps_val[i] = MBA_MAX_MBPS;
-		}
 	}
 	cpu = get_cpu();
 	/* Update CBM on this cpu if it's in cpu_mask. */
-- 
2.30.2

[PATCH v5 11/21] x86/resctrl: Allow update_mba_bw() to update controls directly

[James Morse]

update_mba_bw() calculates a new control value for the MBA resource
based on the user provided mbps_val and the current measured
bandwidth. Some control values need remapping by delay_bw_map().

It does this by calling wrmsrl() directly. This needs splitting
up to be done by an architecture specific helper, so that the
remainder can eventually be moved to /fs/.

Add resctrl_arch_update_one() to apply one configuration value
to the provided resource and domain. This avoids the staging
and cross-calling that is only needed with changes made by
user-space. delay_bw_map() moves to be part of the arch code,
to maintain the 'percentage control' view of MBA resources
in resctrl.

Reviewed-by: Jamie Iles <quic_jiles@quicinc.com>
Tested-by: Xin Hao <xhao@linux.alibaba.com>
Reviewed-by: Shaopeng Tan <tan.shaopeng@fujitsu.com>
Tested-by: Shaopeng Tan <tan.shaopeng@fujitsu.com>
Tested-by: Cristian Marussi <cristian.marussi@arm.com>
Signed-off-by: James Morse <james.morse@arm.com>
---
Changes since v2:
 * Call msr_update() directly from resctrl_arch_update_one().

Changes since v1:
 * Capitalisation
---
 arch/x86/kernel/cpu/resctrl/core.c        |  2 +-
 arch/x86/kernel/cpu/resctrl/ctrlmondata.c | 21 +++++++++++++++++++++
 arch/x86/kernel/cpu/resctrl/internal.h    |  1 -
 arch/x86/kernel/cpu/resctrl/monitor.c     | 13 ++++---------
 include/linux/resctrl.h                   |  8 ++++++++
 5 files changed, 34 insertions(+), 11 deletions(-)

diff --git a/arch/x86/kernel/cpu/resctrl/core.c b/arch/x86/kernel/cpu/resctrl/core.c
index f0e2820af475..90ebb7d71af2 100644
--- a/arch/x86/kernel/cpu/resctrl/core.c
+++ b/arch/x86/kernel/cpu/resctrl/core.c
@@ -296,7 +296,7 @@ mba_wrmsr_amd(struct rdt_domain *d, struct msr_param *m, struct rdt_resource *r)
  * that can be written to QOS_MSRs.
  * There are currently no SKUs which support non linear delay values.
  */
-u32 delay_bw_map(unsigned long bw, struct rdt_resource *r)
+static u32 delay_bw_map(unsigned long bw, struct rdt_resource *r)
 {
 	if (r->membw.delay_linear)
 		return MAX_MBA_BW - bw;
diff --git a/arch/x86/kernel/cpu/resctrl/ctrlmondata.c b/arch/x86/kernel/cpu/resctrl/ctrlmondata.c
index 9f45207a6c74..ece3a1e0e6f2 100644
--- a/arch/x86/kernel/cpu/resctrl/ctrlmondata.c
+++ b/arch/x86/kernel/cpu/resctrl/ctrlmondata.c
@@ -282,6 +282,27 @@ static bool apply_config(struct rdt_hw_domain *hw_dom,
 	return false;
 }
 
+int resctrl_arch_update_one(struct rdt_resource *r, struct rdt_domain *d,
+			    u32 closid, enum resctrl_conf_type t, u32 cfg_val)
+{
+	struct rdt_hw_resource *hw_res = resctrl_to_arch_res(r);
+	struct rdt_hw_domain *hw_dom = resctrl_to_arch_dom(d);
+	u32 idx = get_config_index(closid, t);
+	struct msr_param msr_param;
+
+	if (!cpumask_test_cpu(smp_processor_id(), &d->cpu_mask))
+		return -EINVAL;
+
+	hw_dom->ctrl_val[idx] = cfg_val;
+
+	msr_param.res = r;
+	msr_param.low = idx;
+	msr_param.high = idx + 1;
+	hw_res->msr_update(d, &msr_param, r);
+
+	return 0;
+}
+
 int resctrl_arch_update_domains(struct rdt_resource *r, u32 closid)
 {
 	struct resctrl_staged_config *cfg;
diff --git a/arch/x86/kernel/cpu/resctrl/internal.h b/arch/x86/kernel/cpu/resctrl/internal.h
index 373aaba53ecd..3b9e43ba7590 100644
--- a/arch/x86/kernel/cpu/resctrl/internal.h
+++ b/arch/x86/kernel/cpu/resctrl/internal.h
@@ -527,7 +527,6 @@ void mbm_setup_overflow_handler(struct rdt_domain *dom,
 void mbm_handle_overflow(struct work_struct *work);
 void __init intel_rdt_mbm_apply_quirk(void);
 bool is_mba_sc(struct rdt_resource *r);
-u32 delay_bw_map(unsigned long bw, struct rdt_resource *r);
 void cqm_setup_limbo_handler(struct rdt_domain *dom, unsigned long delay_ms);
 void cqm_handle_limbo(struct work_struct *work);
 bool has_busy_rmid(struct rdt_resource *r, struct rdt_domain *d);
diff --git a/arch/x86/kernel/cpu/resctrl/monitor.c b/arch/x86/kernel/cpu/resctrl/monitor.c
index 16028b2f756a..3e69386cfe00 100644
--- a/arch/x86/kernel/cpu/resctrl/monitor.c
+++ b/arch/x86/kernel/cpu/resctrl/monitor.c
@@ -420,10 +420,8 @@ void mon_event_count(void *info)
  */
 static void update_mba_bw(struct rdtgroup *rgrp, struct rdt_domain *dom_mbm)
 {
-	u32 closid, rmid, cur_msr, cur_msr_val, new_msr_val;
+	u32 closid, rmid, cur_msr_val, new_msr_val;
 	struct mbm_state *pmbm_data, *cmbm_data;
-	struct rdt_hw_resource *hw_r_mba;
-	struct rdt_hw_domain *hw_dom_mba;
 	u32 cur_bw, delta_bw, user_bw;
 	struct rdt_resource *r_mba;
 	struct rdt_domain *dom_mba;
@@ -433,8 +431,8 @@ static void update_mba_bw(struct rdtgroup *rgrp, struct rdt_domain *dom_mbm)
 	if (!is_mbm_local_enabled())
 		return;
 
-	hw_r_mba = &rdt_resources_all[RDT_RESOURCE_MBA];
-	r_mba = &hw_r_mba->r_resctrl;
+	r_mba = &rdt_resources_all[RDT_RESOURCE_MBA].r_resctrl;
+
 	closid = rgrp->closid;
 	rmid = rgrp->mon.rmid;
 	pmbm_data = &dom_mbm->mbm_local[rmid];
@@ -444,7 +442,6 @@ static void update_mba_bw(struct rdtgroup *rgrp, struct rdt_domain *dom_mbm)
 		pr_warn_once("Failure to get domain for MBA update\n");
 		return;
 	}
-	hw_dom_mba = resctrl_to_arch_dom(dom_mba);
 
 	cur_bw = pmbm_data->prev_bw;
 	user_bw = dom_mba->mbps_val[closid];
@@ -486,9 +483,7 @@ static void update_mba_bw(struct rdtgroup *rgrp, struct rdt_domain *dom_mbm)
 		return;
 	}
 
-	cur_msr = hw_r_mba->msr_base + closid;
-	wrmsrl(cur_msr, delay_bw_map(new_msr_val, r_mba));
-	hw_dom_mba->ctrl_val[closid] = new_msr_val;
+	resctrl_arch_update_one(r_mba, dom_mba, closid, CDP_NONE, new_msr_val);
 
 	/*
 	 * Delta values are updated dynamically package wise for each
diff --git a/include/linux/resctrl.h b/include/linux/resctrl.h
index 93dfe553b364..f4c9101df461 100644
--- a/include/linux/resctrl.h
+++ b/include/linux/resctrl.h
@@ -197,6 +197,14 @@ struct resctrl_schema {
 /* The number of closid supported by this resource regardless of CDP */
 u32 resctrl_arch_get_num_closid(struct rdt_resource *r);
 int resctrl_arch_update_domains(struct rdt_resource *r, u32 closid);
+
+/*
+ * Update the ctrl_val and apply this config right now.
+ * Must be called on one of the domain's CPUs.
+ */
+int resctrl_arch_update_one(struct rdt_resource *r, struct rdt_domain *d,
+			    u32 closid, enum resctrl_conf_type t, u32 cfg_val);
+
 u32 resctrl_arch_get_config(struct rdt_resource *r, struct rdt_domain *d,
 			    u32 closid, enum resctrl_conf_type type);
 int resctrl_online_domain(struct rdt_resource *r, struct rdt_domain *d);
-- 
2.30.2

[PATCH v5 12/21] x86/resctrl: Calculate bandwidth from the previous __mon_event_count() chunks

[James Morse]

mbm_bw_count() is only called by the mbm_handle_overflow() worker once a
second. It reads the hardware register, calculates the bandwidth and
updates m->prev_bw_msr which is used to hold the previous hardware register
value.

Operating directly on hardware register values makes it difficult to make
this code architecture independent, so that it can be moved to /fs/,
making the mba_sc feature something resctrl supports with no additional
support from the architecture.
Prior to calling mbm_bw_count(), mbm_update() reads from the same hardware
register using __mon_event_count().

Change mbm_bw_count() to use the current chunks value most recently saved
by __mon_event_count(). This removes an extra call to __rmid_read().
Instead of using m->prev_msr to calculate the number of chunks seen,
use the rr->val that was updated by __mon_event_count(). This removes an
extra call to mbm_overflow_count() and get_corrected_mbm_count().
Calculating bandwidth like this means mbm_bw_count() no longer operates
on hardware register values directly.

Reviewed-by: Jamie Iles <quic_jiles@quicinc.com>
Tested-by: Xin Hao <xhao@linux.alibaba.com>
Reviewed-by: Shaopeng Tan <tan.shaopeng@fujitsu.com>
Tested-by: Shaopeng Tan <tan.shaopeng@fujitsu.com>
Tested-by: Cristian Marussi <cristian.marussi@arm.com>
Signed-off-by: James Morse <james.morse@arm.com>
---
Changes since v3:
 * Reset rr.val before each use to avoid over counting.
 * Fixed typos in kerneldoc.

Changes since v2:
 * Expanded commit message

Changes since v1:
 * This patch was rewritten
---
 arch/x86/kernel/cpu/resctrl/internal.h |  4 ++--
 arch/x86/kernel/cpu/resctrl/monitor.c  | 25 ++++++++++++++++---------
 2 files changed, 18 insertions(+), 11 deletions(-)

diff --git a/arch/x86/kernel/cpu/resctrl/internal.h b/arch/x86/kernel/cpu/resctrl/internal.h
index 3b9e43ba7590..46062099d69e 100644
--- a/arch/x86/kernel/cpu/resctrl/internal.h
+++ b/arch/x86/kernel/cpu/resctrl/internal.h
@@ -289,7 +289,7 @@ struct rftype {
  * struct mbm_state - status for each MBM counter in each domain
  * @chunks:	Total data moved (multiply by rdt_group.mon_scale to get bytes)
  * @prev_msr:	Value of IA32_QM_CTR for this RMID last time we read it
- * @prev_bw_msr:Value of previous IA32_QM_CTR for bandwidth counting
+ * @prev_bw_chunks: Previous chunks value read for bandwidth calculation
  * @prev_bw:	The most recent bandwidth in MBps
  * @delta_bw:	Difference between the current and previous bandwidth
  * @delta_comp:	Indicates whether to compute the delta_bw
@@ -297,7 +297,7 @@ struct rftype {
 struct mbm_state {
 	u64	chunks;
 	u64	prev_msr;
-	u64	prev_bw_msr;
+	u64	prev_bw_chunks;
 	u32	prev_bw;
 	u32	delta_bw;
 	bool	delta_comp;
diff --git a/arch/x86/kernel/cpu/resctrl/monitor.c b/arch/x86/kernel/cpu/resctrl/monitor.c
index 3e69386cfe00..2d81b6cd9632 100644
--- a/arch/x86/kernel/cpu/resctrl/monitor.c
+++ b/arch/x86/kernel/cpu/resctrl/monitor.c
@@ -315,7 +315,7 @@ static u64 __mon_event_count(u32 rmid, struct rmid_read *rr)
 
 	if (rr->first) {
 		memset(m, 0, sizeof(struct mbm_state));
-		m->prev_bw_msr = m->prev_msr = tval;
+		m->prev_msr = tval;
 		return 0;
 	}
 
@@ -329,27 +329,32 @@ static u64 __mon_event_count(u32 rmid, struct rmid_read *rr)
 }
 
 /*
+ * mbm_bw_count() - Update bw count from values previously read by
+ *		    __mon_event_count().
+ * @rmid:	The rmid used to identify the cached mbm_state.
+ * @rr:		The struct rmid_read populated by __mon_event_count().
+ *
  * Supporting function to calculate the memory bandwidth
- * and delta bandwidth in MBps.
+ * and delta bandwidth in MBps. The chunks value previously read by
+ * __mon_event_count() is compared with the chunks value from the previous
+ * invocation. This must be called once per second to maintain values in MBps.
  */
 static void mbm_bw_count(u32 rmid, struct rmid_read *rr)
 {
 	struct rdt_hw_resource *hw_res = resctrl_to_arch_res(rr->r);
 	struct mbm_state *m = &rr->d->mbm_local[rmid];
-	u64 tval, cur_bw, chunks;
+	u64 cur_bw, chunks, cur_chunks;
 
-	tval = __rmid_read(rmid, rr->evtid);
-	if (tval & (RMID_VAL_ERROR | RMID_VAL_UNAVAIL))
-		return;
+	cur_chunks = rr->val;
+	chunks = cur_chunks - m->prev_bw_chunks;
+	m->prev_bw_chunks = cur_chunks;
 
-	chunks = mbm_overflow_count(m->prev_bw_msr, tval, hw_res->mbm_width);
-	cur_bw = (get_corrected_mbm_count(rmid, chunks) * hw_res->mon_scale) >> 20;
+	cur_bw = (chunks * hw_res->mon_scale) >> 20;
 
 	if (m->delta_comp)
 		m->delta_bw = abs(cur_bw - m->prev_bw);
 	m->delta_comp = false;
 	m->prev_bw = cur_bw;
-	m->prev_bw_msr = tval;
 }
 
 /*
@@ -516,10 +521,12 @@ static void mbm_update(struct rdt_resource *r, struct rdt_domain *d, int rmid)
 	 */
 	if (is_mbm_total_enabled()) {
 		rr.evtid = QOS_L3_MBM_TOTAL_EVENT_ID;
+		rr.val = 0;
 		__mon_event_count(rmid, &rr);
 	}
 	if (is_mbm_local_enabled()) {
 		rr.evtid = QOS_L3_MBM_LOCAL_EVENT_ID;
+		rr.val = 0;
 		__mon_event_count(rmid, &rr);
 
 		/*
-- 
2.30.2

[PATCH v5 13/21] x86/resctrl: Add per-rmid arch private storage for overflow and chunks

[James Morse]

A renamed __rmid_read() is intended as the function that an
architecture agnostic resctrl filesystem driver can use to
read a value in bytes from a counter. Currently the function returns
the MBM values in chunks directly from hardware. For bandwidth
counters the resctrl filesystem uses this to calculate the number of
bytes ever seen.

MPAM's scaling of counters can be changed at runtime, reducing the
resolution but increasing the range. When this is changed the prev_msr
values need to be converted by the architecture code.

Add an array for per-rmid private storage. The prev_msr and chunks
values will move here to allow resctrl_arch_rmid_read() to always
return the number of bytes read by this counter without assistance
from the filesystem. The values are moved in later patches when
the overflow and correction calls are moved into __rmid_read().

Reviewed-by: Jamie Iles <quic_jiles@quicinc.com>
Tested-by: Xin Hao <xhao@linux.alibaba.com>
Reviewed-by: Shaopeng Tan <tan.shaopeng@fujitsu.com>
Tested-by: Shaopeng Tan <tan.shaopeng@fujitsu.com>
Tested-by: Cristian Marussi <cristian.marussi@arm.com>
Signed-off-by: James Morse <james.morse@arm.com>
---
Changes since v2:
 * Capitalisation
 * Use __rmid_read() as this patch is earlier in the series.
 * kfree() one array in arch_domain_mbm_alloc() when allocating the other
   fails, instead of relying on domain_free().
 * Remove the documentation that domain_free() has to be called to cleanup
   if this call fails.
---
 arch/x86/kernel/cpu/resctrl/core.c     | 35 ++++++++++++++++++++++++++
 arch/x86/kernel/cpu/resctrl/internal.h | 14 +++++++++++
 2 files changed, 49 insertions(+)

diff --git a/arch/x86/kernel/cpu/resctrl/core.c b/arch/x86/kernel/cpu/resctrl/core.c
index 90ebb7d71af2..de62b0b87ced 100644
--- a/arch/x86/kernel/cpu/resctrl/core.c
+++ b/arch/x86/kernel/cpu/resctrl/core.c
@@ -413,6 +413,8 @@ static void setup_default_ctrlval(struct rdt_resource *r, u32 *dc)
 
 static void domain_free(struct rdt_hw_domain *hw_dom)
 {
+	kfree(hw_dom->arch_mbm_total);
+	kfree(hw_dom->arch_mbm_local);
 	kfree(hw_dom->ctrl_val);
 	kfree(hw_dom);
 }
@@ -438,6 +440,34 @@ static int domain_setup_ctrlval(struct rdt_resource *r, struct rdt_domain *d)
 	return 0;
 }
 
+/**
+ * arch_domain_mbm_alloc() - Allocate arch private storage for the MBM counters
+ * @num_rmid:	The size of the MBM counter array
+ * @hw_dom:	The domain that owns the allocated arrays
+ */
+static int arch_domain_mbm_alloc(u32 num_rmid, struct rdt_hw_domain *hw_dom)
+{
+	size_t tsize;
+
+	if (is_mbm_total_enabled()) {
+		tsize = sizeof(*hw_dom->arch_mbm_total);
+		hw_dom->arch_mbm_total = kcalloc(num_rmid, tsize, GFP_KERNEL);
+		if (!hw_dom->arch_mbm_total)
+			return -ENOMEM;
+	}
+	if (is_mbm_local_enabled()) {
+		tsize = sizeof(*hw_dom->arch_mbm_local);
+		hw_dom->arch_mbm_local = kcalloc(num_rmid, tsize, GFP_KERNEL);
+		if (!hw_dom->arch_mbm_local) {
+			kfree(hw_dom->arch_mbm_total);
+			hw_dom->arch_mbm_total = NULL;
+			return -ENOMEM;
+		}
+	}
+
+	return 0;
+}
+
 /*
  * domain_add_cpu - Add a cpu to a resource's domain list.
  *
@@ -487,6 +517,11 @@ static void domain_add_cpu(int cpu, struct rdt_resource *r)
 		return;
 	}
 
+	if (r->mon_capable && arch_domain_mbm_alloc(r->num_rmid, hw_dom)) {
+		domain_free(hw_dom);
+		return;
+	}
+
 	list_add_tail(&d->list, add_pos);
 
 	err = resctrl_online_domain(r, d);
diff --git a/arch/x86/kernel/cpu/resctrl/internal.h b/arch/x86/kernel/cpu/resctrl/internal.h
index 46062099d69e..4de8e5bb93e1 100644
--- a/arch/x86/kernel/cpu/resctrl/internal.h
+++ b/arch/x86/kernel/cpu/resctrl/internal.h
@@ -303,17 +303,31 @@ struct mbm_state {
 	bool	delta_comp;
 };
 
+/**
+ * struct arch_mbm_state - values used to compute resctrl_arch_rmid_read()s
+ *			   return value.
+ * @prev_msr:	Value of IA32_QM_CTR last time it was read for the RMID used to
+ *		find this struct.
+ */
+struct arch_mbm_state {
+	u64	prev_msr;
+};
+
 /**
  * struct rdt_hw_domain - Arch private attributes of a set of CPUs that share
  *			  a resource
  * @d_resctrl:	Properties exposed to the resctrl file system
  * @ctrl_val:	array of cache or mem ctrl values (indexed by CLOSID)
+ * @arch_mbm_total:	arch private state for MBM total bandwidth
+ * @arch_mbm_local:	arch private state for MBM local bandwidth
  *
  * Members of this structure are accessed via helpers that provide abstraction.
  */
 struct rdt_hw_domain {
 	struct rdt_domain		d_resctrl;
 	u32				*ctrl_val;
+	struct arch_mbm_state		*arch_mbm_total;
+	struct arch_mbm_state		*arch_mbm_local;
 };
 
 static inline struct rdt_hw_domain *resctrl_to_arch_dom(struct rdt_domain *r)
-- 
2.30.2

[PATCH v5 14/21] x86/resctrl: Allow per-rmid arch private storage to be reset

[James Morse]

To abstract the rmid counters into a helper that returns the number
of bytes counted, architecture specific per-rmid state is needed.

It needs to be possible to reset this hidden state, as the values
may outlive the life of an rmid, or the mount time of the filesystem.

mon_event_read() is called with first = true when an rmid is first
allocated in mkdir_mondata_subdir(). Add resctrl_arch_reset_rmid()
and call it from __mon_event_count()'s rr->first check.

Reviewed-by: Jamie Iles <quic_jiles@quicinc.com>
Tested-by: Xin Hao <xhao@linux.alibaba.com>
Reviewed-by: Shaopeng Tan <tan.shaopeng@fujitsu.com>
Tested-by: Shaopeng Tan <tan.shaopeng@fujitsu.com>
Tested-by: Cristian Marussi <cristian.marussi@arm.com>
Signed-off-by: James Morse <james.morse@arm.com>

---
Changes since v1:
 * Aded WARN_ON_ONCE() for a case that should never happen.
---
 arch/x86/kernel/cpu/resctrl/internal.h | 18 ++++---------
 arch/x86/kernel/cpu/resctrl/monitor.c  | 35 +++++++++++++++++++++++++-
 include/linux/resctrl.h                | 23 +++++++++++++++++
 3 files changed, 62 insertions(+), 14 deletions(-)

diff --git a/arch/x86/kernel/cpu/resctrl/internal.h b/arch/x86/kernel/cpu/resctrl/internal.h
index 4de8e5bb93e1..b34a1403f033 100644
--- a/arch/x86/kernel/cpu/resctrl/internal.h
+++ b/arch/x86/kernel/cpu/resctrl/internal.h
@@ -22,14 +22,6 @@
 
 #define L2_QOS_CDP_ENABLE		0x01ULL
 
-/*
- * Event IDs are used to program IA32_QM_EVTSEL before reading event
- * counter from IA32_QM_CTR
- */
-#define QOS_L3_OCCUP_EVENT_ID		0x01
-#define QOS_L3_MBM_TOTAL_EVENT_ID	0x02
-#define QOS_L3_MBM_LOCAL_EVENT_ID	0x03
-
 #define CQM_LIMBOCHECK_INTERVAL	1000
 
 #define MBM_CNTR_WIDTH_BASE		24
@@ -73,7 +65,7 @@ DECLARE_STATIC_KEY_FALSE(rdt_mon_enable_key);
  * @list:		entry in &rdt_resource->evt_list
  */
 struct mon_evt {
-	u32			evtid;
+	enum resctrl_event_id	evtid;
 	char			*name;
 	struct list_head	list;
 };
@@ -90,9 +82,9 @@ struct mon_evt {
 union mon_data_bits {
 	void *priv;
 	struct {
-		unsigned int rid	: 10;
-		unsigned int evtid	: 8;
-		unsigned int domid	: 14;
+		unsigned int rid		: 10;
+		enum resctrl_event_id evtid	: 8;
+		unsigned int domid		: 14;
 	} u;
 };
 
@@ -100,7 +92,7 @@ struct rmid_read {
 	struct rdtgroup		*rgrp;
 	struct rdt_resource	*r;
 	struct rdt_domain	*d;
-	int			evtid;
+	enum resctrl_event_id	evtid;
 	bool			first;
 	u64			val;
 };
diff --git a/arch/x86/kernel/cpu/resctrl/monitor.c b/arch/x86/kernel/cpu/resctrl/monitor.c
index 2d81b6cd9632..e9755143492b 100644
--- a/arch/x86/kernel/cpu/resctrl/monitor.c
+++ b/arch/x86/kernel/cpu/resctrl/monitor.c
@@ -137,7 +137,37 @@ static inline struct rmid_entry *__rmid_entry(u32 rmid)
 	return entry;
 }
 
-static u64 __rmid_read(u32 rmid, u32 eventid)
+static struct arch_mbm_state *get_arch_mbm_state(struct rdt_hw_domain *hw_dom,
+						 u32 rmid,
+						 enum resctrl_event_id eventid)
+{
+	switch (eventid) {
+	case QOS_L3_OCCUP_EVENT_ID:
+		return NULL;
+	case QOS_L3_MBM_TOTAL_EVENT_ID:
+		return &hw_dom->arch_mbm_total[rmid];
+	case QOS_L3_MBM_LOCAL_EVENT_ID:
+		return &hw_dom->arch_mbm_local[rmid];
+	}
+
+	/* Never expect to get here */
+	WARN_ON_ONCE(1);
+
+	return NULL;
+}
+
+void resctrl_arch_reset_rmid(struct rdt_resource *r, struct rdt_domain *d,
+			     u32 rmid, enum resctrl_event_id eventid)
+{
+	struct rdt_hw_domain *hw_dom = resctrl_to_arch_dom(d);
+	struct arch_mbm_state *am;
+
+	am = get_arch_mbm_state(hw_dom, rmid, eventid);
+	if (am)
+		memset(am, 0, sizeof(*am));
+}
+
+static u64 __rmid_read(u32 rmid, enum resctrl_event_id eventid)
 {
 	u64 val;
 
@@ -291,6 +321,9 @@ static u64 __mon_event_count(u32 rmid, struct rmid_read *rr)
 	struct mbm_state *m;
 	u64 chunks, tval;
 
+	if (rr->first)
+		resctrl_arch_reset_rmid(rr->r, rr->d, rmid, rr->evtid);
+
 	tval = __rmid_read(rmid, rr->evtid);
 	if (tval & (RMID_VAL_ERROR | RMID_VAL_UNAVAIL)) {
 		return tval;
diff --git a/include/linux/resctrl.h b/include/linux/resctrl.h
index f4c9101df461..818456770176 100644
--- a/include/linux/resctrl.h
+++ b/include/linux/resctrl.h
@@ -32,6 +32,16 @@ enum resctrl_conf_type {
 
 #define CDP_NUM_TYPES	(CDP_DATA + 1)
 
+/*
+ * Event IDs, the values match those used to program IA32_QM_EVTSEL before
+ * reading IA32_QM_CTR on RDT systems.
+ */
+enum resctrl_event_id {
+	QOS_L3_OCCUP_EVENT_ID		= 0x01,
+	QOS_L3_MBM_TOTAL_EVENT_ID	= 0x02,
+	QOS_L3_MBM_LOCAL_EVENT_ID	= 0x03,
+};
+
 /**
  * struct resctrl_staged_config - parsed configuration to be applied
  * @new_ctrl:		new ctrl value to be loaded
@@ -210,4 +220,17 @@ u32 resctrl_arch_get_config(struct rdt_resource *r, struct rdt_domain *d,
 int resctrl_online_domain(struct rdt_resource *r, struct rdt_domain *d);
 void resctrl_offline_domain(struct rdt_resource *r, struct rdt_domain *d);
 
+/**
+ * resctrl_arch_reset_rmid() - Reset any private state associated with rmid
+ *			       and eventid.
+ * @r:		The domain's resource.
+ * @d:		The rmid's domain.
+ * @rmid:	The rmid whose counter values should be reset.
+ * @eventid:	The eventid whose counter values should be reset.
+ *
+ * This can be called from any CPU.
+ */
+void resctrl_arch_reset_rmid(struct rdt_resource *r, struct rdt_domain *d,
+			     u32 rmid, enum resctrl_event_id eventid);
+
 #endif /* _RESCTRL_H */
-- 
2.30.2

[PATCH v5 15/21] x86/resctrl: Abstract __rmid_read()

[James Morse]

__rmid_read() selects the specified eventid and returns the counter
value from the MSR. The error handling is architecture specific, and
handled by the callers, rdtgroup_mondata_show() and __mon_event_count().

Error handling should be handled by architecture specific code, as
a different architecture may have different requirements. MPAM's
counters can report that they are 'not ready', requiring a second
read after a short delay. This should be hidden from resctrl.

Make __rmid_read() the architecture specific function for reading
a counter. Rename it resctrl_arch_rmid_read() and move the error
handling into it.

A read from a counter that hardware supports but resctrl does not
now returns -EINVAL instead of -EIO from the default case in
__mon_event_count(). It isn't possible for user-space to see this
change as resctrl doesn't expose counters it doesn't support.

Reviewed-by: Jamie Iles <quic_jiles@quicinc.com>
Tested-by: Xin Hao <xhao@linux.alibaba.com>
Reviewed-by: Shaopeng Tan <tan.shaopeng@fujitsu.com>
Tested-by: Shaopeng Tan <tan.shaopeng@fujitsu.com>
Tested-by: Cristian Marussi <cristian.marussi@arm.com>
Signed-off-by: James Morse <james.morse@arm.com>
---
Changes since v4:
 * Fixed __rmid_read in comment.
 * Renamed ret_val ret.

Changes since v3:
 * Changed return type of __mon_event_count().
 * Clarified comment in mon_event_count()

Changes since v2:
 * Capitalisation
 * Stray newline restored
 * Removed rr->val set to the error value, and replaced it with clearing the
   the error to hide Unavailable from monitor group reads. (and added a block
   comment).

Changes since v1:
 * Return EINVAL from the impossible case in __mon_event_count() instead
   of an x86 hardware specific value.
---
 arch/x86/kernel/cpu/resctrl/ctrlmondata.c |  4 +-
 arch/x86/kernel/cpu/resctrl/internal.h    |  1 +
 arch/x86/kernel/cpu/resctrl/monitor.c     | 62 ++++++++++++++---------
 include/linux/resctrl.h                   |  1 +
 4 files changed, 43 insertions(+), 25 deletions(-)

diff --git a/arch/x86/kernel/cpu/resctrl/ctrlmondata.c b/arch/x86/kernel/cpu/resctrl/ctrlmondata.c
index ece3a1e0e6f2..d3f7eb2ac14b 100644
--- a/arch/x86/kernel/cpu/resctrl/ctrlmondata.c
+++ b/arch/x86/kernel/cpu/resctrl/ctrlmondata.c
@@ -579,9 +579,9 @@ int rdtgroup_mondata_show(struct seq_file *m, void *arg)
 
 	mon_event_read(&rr, r, d, rdtgrp, evtid, false);
 
-	if (rr.val & RMID_VAL_ERROR)
+	if (rr.err == -EIO)
 		seq_puts(m, "Error\n");
-	else if (rr.val & RMID_VAL_UNAVAIL)
+	else if (rr.err == -EINVAL)
 		seq_puts(m, "Unavailable\n");
 	else
 		seq_printf(m, "%llu\n", rr.val * hw_res->mon_scale);
diff --git a/arch/x86/kernel/cpu/resctrl/internal.h b/arch/x86/kernel/cpu/resctrl/internal.h
index b34a1403f033..1d2e7bd6305f 100644
--- a/arch/x86/kernel/cpu/resctrl/internal.h
+++ b/arch/x86/kernel/cpu/resctrl/internal.h
@@ -94,6 +94,7 @@ struct rmid_read {
 	struct rdt_domain	*d;
 	enum resctrl_event_id	evtid;
 	bool			first;
+	int			err;
 	u64			val;
 };
 
diff --git a/arch/x86/kernel/cpu/resctrl/monitor.c b/arch/x86/kernel/cpu/resctrl/monitor.c
index e9755143492b..51ab76f2dfbc 100644
--- a/arch/x86/kernel/cpu/resctrl/monitor.c
+++ b/arch/x86/kernel/cpu/resctrl/monitor.c
@@ -167,9 +167,9 @@ void resctrl_arch_reset_rmid(struct rdt_resource *r, struct rdt_domain *d,
 		memset(am, 0, sizeof(*am));
 }
 
-static u64 __rmid_read(u32 rmid, enum resctrl_event_id eventid)
+int resctrl_arch_rmid_read(u32 rmid, enum resctrl_event_id eventid, u64 *val)
 {
-	u64 val;
+	u64 msr_val;
 
 	/*
 	 * As per the SDM, when IA32_QM_EVTSEL.EvtID (bits 7:0) is configured
@@ -180,14 +180,24 @@ static u64 __rmid_read(u32 rmid, enum resctrl_event_id eventid)
 	 * are error bits.
 	 */
 	wrmsr(MSR_IA32_QM_EVTSEL, eventid, rmid);
-	rdmsrl(MSR_IA32_QM_CTR, val);
+	rdmsrl(MSR_IA32_QM_CTR, msr_val);
 
-	return val;
+	if (msr_val & RMID_VAL_ERROR)
+		return -EIO;
+	if (msr_val & RMID_VAL_UNAVAIL)
+		return -EINVAL;
+
+	*val = msr_val;
+
+	return 0;
 }
 
 static bool rmid_dirty(struct rmid_entry *entry)
 {
-	u64 val = __rmid_read(entry->rmid, QOS_L3_OCCUP_EVENT_ID);
+	u64 val = 0;
+
+	if (resctrl_arch_rmid_read(entry->rmid, QOS_L3_OCCUP_EVENT_ID, &val))
+		return true;
 
 	return val >= resctrl_cqm_threshold;
 }
@@ -259,8 +269,8 @@ static void add_rmid_to_limbo(struct rmid_entry *entry)
 {
 	struct rdt_resource *r;
 	struct rdt_domain *d;
-	int cpu;
-	u64 val;
+	int cpu, err;
+	u64 val = 0;
 
 	r = &rdt_resources_all[RDT_RESOURCE_L3].r_resctrl;
 
@@ -268,8 +278,10 @@ static void add_rmid_to_limbo(struct rmid_entry *entry)
 	cpu = get_cpu();
 	list_for_each_entry(d, &r->domains, list) {
 		if (cpumask_test_cpu(cpu, &d->cpu_mask)) {
-			val = __rmid_read(entry->rmid, QOS_L3_OCCUP_EVENT_ID);
-			if (val <= resctrl_cqm_threshold)
+			err = resctrl_arch_rmid_read(entry->rmid,
+						     QOS_L3_OCCUP_EVENT_ID,
+						     &val);
+			if (err || val <= resctrl_cqm_threshold)
 				continue;
 		}
 
@@ -315,19 +327,19 @@ static u64 mbm_overflow_count(u64 prev_msr, u64 cur_msr, unsigned int width)
 	return chunks >> shift;
 }
 
-static u64 __mon_event_count(u32 rmid, struct rmid_read *rr)
+static int __mon_event_count(u32 rmid, struct rmid_read *rr)
 {
 	struct rdt_hw_resource *hw_res = resctrl_to_arch_res(rr->r);
 	struct mbm_state *m;
-	u64 chunks, tval;
+	u64 chunks, tval = 0;
 
 	if (rr->first)
 		resctrl_arch_reset_rmid(rr->r, rr->d, rmid, rr->evtid);
 
-	tval = __rmid_read(rmid, rr->evtid);
-	if (tval & (RMID_VAL_ERROR | RMID_VAL_UNAVAIL)) {
-		return tval;
-	}
+	rr->err = resctrl_arch_rmid_read(rmid, rr->evtid, &tval);
+	if (rr->err)
+		return rr->err;
+
 	switch (rr->evtid) {
 	case QOS_L3_OCCUP_EVENT_ID:
 		rr->val += tval;
@@ -341,9 +353,9 @@ static u64 __mon_event_count(u32 rmid, struct rmid_read *rr)
 	default:
 		/*
 		 * Code would never reach here because an invalid
-		 * event id would fail the __rmid_read.
+		 * event id would fail in resctrl_arch_rmid_read().
 		 */
-		return RMID_VAL_ERROR;
+		return -EINVAL;
 	}
 
 	if (rr->first) {
@@ -399,11 +411,11 @@ void mon_event_count(void *info)
 	struct rdtgroup *rdtgrp, *entry;
 	struct rmid_read *rr = info;
 	struct list_head *head;
-	u64 ret_val;
+	int ret;
 
 	rdtgrp = rr->rgrp;
 
-	ret_val = __mon_event_count(rdtgrp->mon.rmid, rr);
+	ret = __mon_event_count(rdtgrp->mon.rmid, rr);
 
 	/*
 	 * For Ctrl groups read data from child monitor groups and
@@ -415,13 +427,17 @@ void mon_event_count(void *info)
 	if (rdtgrp->type == RDTCTRL_GROUP) {
 		list_for_each_entry(entry, head, mon.crdtgrp_list) {
 			if (__mon_event_count(entry->mon.rmid, rr) == 0)
-				ret_val = 0;
+				ret = 0;
 		}
 	}
 
-	/* Report error if none of rmid_reads are successful */
-	if (ret_val)
-		rr->val = ret_val;
+	/*
+	 * __mon_event_count() calls for newly created monitor groups may
+	 * report -EINVAL/Unavailable if the monitor hasn't seen any traffic.
+	 * Discard error if any of the monitor event reads succeeded.
+	 */
+	if (ret == 0)
+		rr->err = 0;
 }
 
 /*
diff --git a/include/linux/resctrl.h b/include/linux/resctrl.h
index 818456770176..efe60dd7fd21 100644
--- a/include/linux/resctrl.h
+++ b/include/linux/resctrl.h
@@ -219,6 +219,7 @@ u32 resctrl_arch_get_config(struct rdt_resource *r, struct rdt_domain *d,
 			    u32 closid, enum resctrl_conf_type type);
 int resctrl_online_domain(struct rdt_resource *r, struct rdt_domain *d);
 void resctrl_offline_domain(struct rdt_resource *r, struct rdt_domain *d);
+int resctrl_arch_rmid_read(u32 rmid, enum resctrl_event_id eventid, u64 *res);
 
 /**
  * resctrl_arch_reset_rmid() - Reset any private state associated with rmid
-- 
2.30.2

[PATCH v5 16/21] x86/resctrl: Pass the required parameters into resctrl_arch_rmid_read()

[James Morse]

resctrl_arch_rmid_read() is intended as the function that an
architecture agnostic resctrl filesystem driver can use to
read a value in bytes from a hardware register. Currently the function
returns the MBM values in chunks directly from hardware.

To convert this to bytes, some correction and overflow calculations
are needed. These depend on the resource and domain structures.
Overflow detection requires the old chunks value. None of this
is available to resctrl_arch_rmid_read(). MPAM requires the
resource and domain structures to find the MMIO device that holds
the registers.

Pass the resource and domain to resctrl_arch_rmid_read(). This makes
rmid_dirty() too big. Instead merge it with its only caller, and the
name is kept as a local variable.

Reviewed-by: Jamie Iles <quic_jiles@quicinc.com>
Tested-by: Xin Hao <xhao@linux.alibaba.com>
Reviewed-by: Shaopeng Tan <tan.shaopeng@fujitsu.com>
Tested-by: Shaopeng Tan <tan.shaopeng@fujitsu.com>
Tested-by: Cristian Marussi <cristian.marussi@arm.com>
Signed-off-by: James Morse <james.morse@arm.com>
---
Changes since v3:
 * Added comment about where resctrl_arch_rmid_read() can be called from.

Changes since v2:
 * Typos.
 * Kerneldoc fixes.

This is all a little noisy for __mon_event_count(), as the switch
statement work is now before the resctrl_arch_rmid_read() call.
---
 arch/x86/kernel/cpu/resctrl/monitor.c | 31 +++++++++++++++------------
 include/linux/resctrl.h               | 18 +++++++++++++++-
 2 files changed, 34 insertions(+), 15 deletions(-)

diff --git a/arch/x86/kernel/cpu/resctrl/monitor.c b/arch/x86/kernel/cpu/resctrl/monitor.c
index 51ab76f2dfbc..262141bf4264 100644
--- a/arch/x86/kernel/cpu/resctrl/monitor.c
+++ b/arch/x86/kernel/cpu/resctrl/monitor.c
@@ -167,10 +167,14 @@ void resctrl_arch_reset_rmid(struct rdt_resource *r, struct rdt_domain *d,
 		memset(am, 0, sizeof(*am));
 }
 
-int resctrl_arch_rmid_read(u32 rmid, enum resctrl_event_id eventid, u64 *val)
+int resctrl_arch_rmid_read(struct rdt_resource *r, struct rdt_domain *d,
+			   u32 rmid, enum resctrl_event_id eventid, u64 *val)
 {
 	u64 msr_val;
 
+	if (!cpumask_test_cpu(smp_processor_id(), &d->cpu_mask))
+		return -EINVAL;
+
 	/*
 	 * As per the SDM, when IA32_QM_EVTSEL.EvtID (bits 7:0) is configured
 	 * with a valid event code for supported resource type and the bits
@@ -192,16 +196,6 @@ int resctrl_arch_rmid_read(u32 rmid, enum resctrl_event_id eventid, u64 *val)
 	return 0;
 }
 
-static bool rmid_dirty(struct rmid_entry *entry)
-{
-	u64 val = 0;
-
-	if (resctrl_arch_rmid_read(entry->rmid, QOS_L3_OCCUP_EVENT_ID, &val))
-		return true;
-
-	return val >= resctrl_cqm_threshold;
-}
-
 /*
  * Check the RMIDs that are marked as busy for this domain. If the
  * reported LLC occupancy is below the threshold clear the busy bit and
@@ -213,6 +207,8 @@ void __check_limbo(struct rdt_domain *d, bool force_free)
 	struct rmid_entry *entry;
 	struct rdt_resource *r;
 	u32 crmid = 1, nrmid;
+	bool rmid_dirty;
+	u64 val = 0;
 
 	r = &rdt_resources_all[RDT_RESOURCE_L3].r_resctrl;
 
@@ -228,7 +224,14 @@ void __check_limbo(struct rdt_domain *d, bool force_free)
 			break;
 
 		entry = __rmid_entry(nrmid);
-		if (force_free || !rmid_dirty(entry)) {
+
+		if (resctrl_arch_rmid_read(r, d, entry->rmid,
+					   QOS_L3_OCCUP_EVENT_ID, &val))
+			rmid_dirty = true;
+		else
+			rmid_dirty = (val >= resctrl_cqm_threshold);
+
+		if (force_free || !rmid_dirty) {
 			clear_bit(entry->rmid, d->rmid_busy_llc);
 			if (!--entry->busy) {
 				rmid_limbo_count--;
@@ -278,7 +281,7 @@ static void add_rmid_to_limbo(struct rmid_entry *entry)
 	cpu = get_cpu();
 	list_for_each_entry(d, &r->domains, list) {
 		if (cpumask_test_cpu(cpu, &d->cpu_mask)) {
-			err = resctrl_arch_rmid_read(entry->rmid,
+			err = resctrl_arch_rmid_read(r, d, entry->rmid,
 						     QOS_L3_OCCUP_EVENT_ID,
 						     &val);
 			if (err || val <= resctrl_cqm_threshold)
@@ -336,7 +339,7 @@ static int __mon_event_count(u32 rmid, struct rmid_read *rr)
 	if (rr->first)
 		resctrl_arch_reset_rmid(rr->r, rr->d, rmid, rr->evtid);
 
-	rr->err = resctrl_arch_rmid_read(rmid, rr->evtid, &tval);
+	rr->err = resctrl_arch_rmid_read(rr->r, rr->d, rmid, rr->evtid, &tval);
 	if (rr->err)
 		return rr->err;
 
diff --git a/include/linux/resctrl.h b/include/linux/resctrl.h
index efe60dd7fd21..7ccfa0d1bb34 100644
--- a/include/linux/resctrl.h
+++ b/include/linux/resctrl.h
@@ -219,7 +219,23 @@ u32 resctrl_arch_get_config(struct rdt_resource *r, struct rdt_domain *d,
 			    u32 closid, enum resctrl_conf_type type);
 int resctrl_online_domain(struct rdt_resource *r, struct rdt_domain *d);
 void resctrl_offline_domain(struct rdt_resource *r, struct rdt_domain *d);
-int resctrl_arch_rmid_read(u32 rmid, enum resctrl_event_id eventid, u64 *res);
+
+/**
+ * resctrl_arch_rmid_read() - Read the eventid counter corresponding to rmid
+ *			      for this resource and domain.
+ * @r:			resource that the counter should be read from.
+ * @d:			domain that the counter should be read from.
+ * @rmid:		rmid of the counter to read.
+ * @eventid:		eventid to read, e.g. L3 occupancy.
+ * @val:		result of the counter read in chunks.
+ *
+ * Call from process context on a CPU that belongs to domain @d.
+ *
+ * Return:
+ * 0 on success, or -EIO, -EINVAL etc on error.
+ */
+int resctrl_arch_rmid_read(struct rdt_resource *r, struct rdt_domain *d,
+			   u32 rmid, enum resctrl_event_id eventid, u64 *val);
 
 /**
  * resctrl_arch_reset_rmid() - Reset any private state associated with rmid
-- 
2.30.2

[PATCH v5 17/21] x86/resctrl: Move mbm_overflow_count() into resctrl_arch_rmid_read()

[James Morse]

resctrl_arch_rmid_read() is intended as the function that an
architecture agnostic resctrl filesystem driver can use to
read a value in bytes from a counter. Currently the function returns
the MBM values in chunks directly from hardware. When reading a bandwidth
counter, mbm_overflow_count() must be used to correct for any possible
overflow.

mbm_overflow_count() is architecture specific, its behaviour should
be part of resctrl_arch_rmid_read().

Move the mbm_overflow_count() calls into resctrl_arch_rmid_read().
This allows the resctrl filesystems's prev_msr to be removed in
favour of the architecture private version.

Reviewed-by: Jamie Iles <quic_jiles@quicinc.com>
Tested-by: Xin Hao <xhao@linux.alibaba.com>
Reviewed-by: Shaopeng Tan <tan.shaopeng@fujitsu.com>
Tested-by: Shaopeng Tan <tan.shaopeng@fujitsu.com>
Tested-by: Cristian Marussi <cristian.marussi@arm.com>
Signed-off-by: James Morse <james.morse@arm.com>
---
 arch/x86/kernel/cpu/resctrl/internal.h |  2 --
 arch/x86/kernel/cpu/resctrl/monitor.c  | 35 +++++++++++++++-----------
 2 files changed, 20 insertions(+), 17 deletions(-)

diff --git a/arch/x86/kernel/cpu/resctrl/internal.h b/arch/x86/kernel/cpu/resctrl/internal.h
index 1d2e7bd6305f..8039e8aba7de 100644
--- a/arch/x86/kernel/cpu/resctrl/internal.h
+++ b/arch/x86/kernel/cpu/resctrl/internal.h
@@ -281,7 +281,6 @@ struct rftype {
 /**
  * struct mbm_state - status for each MBM counter in each domain
  * @chunks:	Total data moved (multiply by rdt_group.mon_scale to get bytes)
- * @prev_msr:	Value of IA32_QM_CTR for this RMID last time we read it
  * @prev_bw_chunks: Previous chunks value read for bandwidth calculation
  * @prev_bw:	The most recent bandwidth in MBps
  * @delta_bw:	Difference between the current and previous bandwidth
@@ -289,7 +288,6 @@ struct rftype {
  */
 struct mbm_state {
 	u64	chunks;
-	u64	prev_msr;
 	u64	prev_bw_chunks;
 	u32	prev_bw;
 	u32	delta_bw;
diff --git a/arch/x86/kernel/cpu/resctrl/monitor.c b/arch/x86/kernel/cpu/resctrl/monitor.c
index 262141bf4264..862a4462ed60 100644
--- a/arch/x86/kernel/cpu/resctrl/monitor.c
+++ b/arch/x86/kernel/cpu/resctrl/monitor.c
@@ -167,9 +167,20 @@ void resctrl_arch_reset_rmid(struct rdt_resource *r, struct rdt_domain *d,
 		memset(am, 0, sizeof(*am));
 }
 
+static u64 mbm_overflow_count(u64 prev_msr, u64 cur_msr, unsigned int width)
+{
+	u64 shift = 64 - width, chunks;
+
+	chunks = (cur_msr << shift) - (prev_msr << shift);
+	return chunks >> shift;
+}
+
 int resctrl_arch_rmid_read(struct rdt_resource *r, struct rdt_domain *d,
 			   u32 rmid, enum resctrl_event_id eventid, u64 *val)
 {
+	struct rdt_hw_resource *hw_res = resctrl_to_arch_res(r);
+	struct rdt_hw_domain *hw_dom = resctrl_to_arch_dom(d);
+	struct arch_mbm_state *am;
 	u64 msr_val;
 
 	if (!cpumask_test_cpu(smp_processor_id(), &d->cpu_mask))
@@ -191,7 +202,13 @@ int resctrl_arch_rmid_read(struct rdt_resource *r, struct rdt_domain *d,
 	if (msr_val & RMID_VAL_UNAVAIL)
 		return -EINVAL;
 
-	*val = msr_val;
+	am = get_arch_mbm_state(hw_dom, rmid, eventid);
+	if (am) {
+		*val = mbm_overflow_count(am->prev_msr, msr_val, hw_res->mbm_width);
+		am->prev_msr = msr_val;
+	} else {
+		*val = msr_val;
+	}
 
 	return 0;
 }
@@ -322,19 +339,10 @@ void free_rmid(u32 rmid)
 		list_add_tail(&entry->list, &rmid_free_lru);
 }
 
-static u64 mbm_overflow_count(u64 prev_msr, u64 cur_msr, unsigned int width)
-{
-	u64 shift = 64 - width, chunks;
-
-	chunks = (cur_msr << shift) - (prev_msr << shift);
-	return chunks >> shift;
-}
-
 static int __mon_event_count(u32 rmid, struct rmid_read *rr)
 {
-	struct rdt_hw_resource *hw_res = resctrl_to_arch_res(rr->r);
 	struct mbm_state *m;
-	u64 chunks, tval = 0;
+	u64 tval = 0;
 
 	if (rr->first)
 		resctrl_arch_reset_rmid(rr->r, rr->d, rmid, rr->evtid);
@@ -363,13 +371,10 @@ static int __mon_event_count(u32 rmid, struct rmid_read *rr)
 
 	if (rr->first) {
 		memset(m, 0, sizeof(struct mbm_state));
-		m->prev_msr = tval;
 		return 0;
 	}
 
-	chunks = mbm_overflow_count(m->prev_msr, tval, hw_res->mbm_width);
-	m->chunks += chunks;
-	m->prev_msr = tval;
+	m->chunks += tval;
 
 	rr->val += get_corrected_mbm_count(rmid, m->chunks);
 
-- 
2.30.2

[PATCH v5 18/21] x86/resctrl: Move get_corrected_mbm_count() into resctrl_arch_rmid_read()

[James Morse]

resctrl_arch_rmid_read() is intended as the function that an
architecture agnostic resctrl filesystem driver can use to
read a value in bytes from a counter. Currently the function returns
the MBM values in chunks directly from hardware. When reading a bandwidth
counter, get_corrected_mbm_count() must be used to correct the
value read.

get_corrected_mbm_count() is architecture specific, this work should be
done in resctrl_arch_rmid_read().

Move the function calls. This allows the resctrl filesystems's chunks
value to be removed in favour of the architecture private version.

Reviewed-by: Jamie Iles <quic_jiles@quicinc.com>
Tested-by: Xin Hao <xhao@linux.alibaba.com>
Reviewed-by: Shaopeng Tan <tan.shaopeng@fujitsu.com>
Tested-by: Shaopeng Tan <tan.shaopeng@fujitsu.com>
Tested-by: Cristian Marussi <cristian.marussi@arm.com>
Signed-off-by: James Morse <james.morse@arm.com>
---
 arch/x86/kernel/cpu/resctrl/internal.h | 4 ++--
 arch/x86/kernel/cpu/resctrl/monitor.c  | 8 ++++----
 2 files changed, 6 insertions(+), 6 deletions(-)

diff --git a/arch/x86/kernel/cpu/resctrl/internal.h b/arch/x86/kernel/cpu/resctrl/internal.h
index 8039e8aba7de..bdb55c2fbdd3 100644
--- a/arch/x86/kernel/cpu/resctrl/internal.h
+++ b/arch/x86/kernel/cpu/resctrl/internal.h
@@ -280,14 +280,12 @@ struct rftype {
 
 /**
  * struct mbm_state - status for each MBM counter in each domain
- * @chunks:	Total data moved (multiply by rdt_group.mon_scale to get bytes)
  * @prev_bw_chunks: Previous chunks value read for bandwidth calculation
  * @prev_bw:	The most recent bandwidth in MBps
  * @delta_bw:	Difference between the current and previous bandwidth
  * @delta_comp:	Indicates whether to compute the delta_bw
  */
 struct mbm_state {
-	u64	chunks;
 	u64	prev_bw_chunks;
 	u32	prev_bw;
 	u32	delta_bw;
@@ -297,10 +295,12 @@ struct mbm_state {
 /**
  * struct arch_mbm_state - values used to compute resctrl_arch_rmid_read()s
  *			   return value.
+ * @chunks:	Total data moved (multiply by rdt_group.mon_scale to get bytes)
  * @prev_msr:	Value of IA32_QM_CTR last time it was read for the RMID used to
  *		find this struct.
  */
 struct arch_mbm_state {
+	u64	chunks;
 	u64	prev_msr;
 };
 
diff --git a/arch/x86/kernel/cpu/resctrl/monitor.c b/arch/x86/kernel/cpu/resctrl/monitor.c
index 862a4462ed60..27bb4947a176 100644
--- a/arch/x86/kernel/cpu/resctrl/monitor.c
+++ b/arch/x86/kernel/cpu/resctrl/monitor.c
@@ -204,7 +204,9 @@ int resctrl_arch_rmid_read(struct rdt_resource *r, struct rdt_domain *d,
 
 	am = get_arch_mbm_state(hw_dom, rmid, eventid);
 	if (am) {
-		*val = mbm_overflow_count(am->prev_msr, msr_val, hw_res->mbm_width);
+		am->chunks += mbm_overflow_count(am->prev_msr, msr_val,
+						 hw_res->mbm_width);
+		*val = get_corrected_mbm_count(rmid, am->chunks);
 		am->prev_msr = msr_val;
 	} else {
 		*val = msr_val;
@@ -374,9 +376,7 @@ static int __mon_event_count(u32 rmid, struct rmid_read *rr)
 		return 0;
 	}
 
-	m->chunks += tval;
-
-	rr->val += get_corrected_mbm_count(rmid, m->chunks);
+	rr->val += tval;
 
 	return 0;
 }
-- 
2.30.2

[PATCH v5 19/21] x86/resctrl: Rename and change the units of resctrl_cqm_threshold

[James Morse]

resctrl_cqm_threshold is stored in a hardware specific chunk size,
but exposed to user-space as bytes.

This means the filesystem parts of resctrl need to know how the hardware
counts, to convert the user provided byte value to chunks. The interface
between the architecture's resctrl code and the filesystem ought to
treat everything as bytes.

Change the unit of resctrl_cqm_threshold to bytes. resctrl_arch_rmid_read()
still returns its value in chunks, so this needs converting to bytes.
As all the users have been touched, rename the variable to
resctrl_rmid_realloc_threshold, which describes what the value is for.

Neither r->num_rmid nor hw_res->mon_scale are guaranteed to be a power
of 2, so the existing code introduces a rounding error from resctrl's
theoretical fraction of the cache usage. This behaviour is kept as it
ensures the user visible value matches the value read from hardware
when the rmid will be reallocated.

Reviewed-by: Jamie Iles <quic_jiles@quicinc.com>
Tested-by: Xin Hao <xhao@linux.alibaba.com>
Reviewed-by: Shaopeng Tan <tan.shaopeng@fujitsu.com>
Tested-by: Shaopeng Tan <tan.shaopeng@fujitsu.com>
Tested-by: Cristian Marussi <cristian.marussi@arm.com>
Signed-off-by: James Morse <james.morse@arm.com>
---
Changes since v4:
 * Added resctrl_arch_round_mon_val() to fix the user provided value.
 * Keep the 'hw counts in chunks' comment.

Changes since v3:
 * Preserved the rounding errors.
---
 arch/x86/include/asm/resctrl.h         |  9 ++++++
 arch/x86/kernel/cpu/resctrl/internal.h |  1 -
 arch/x86/kernel/cpu/resctrl/monitor.c  | 43 ++++++++++++++++----------
 arch/x86/kernel/cpu/resctrl/rdtgroup.c |  9 ++----
 include/linux/resctrl.h                |  2 ++
 5 files changed, 39 insertions(+), 25 deletions(-)

diff --git a/arch/x86/include/asm/resctrl.h b/arch/x86/include/asm/resctrl.h
index d60ed0668a59..d24b04ebf950 100644
--- a/arch/x86/include/asm/resctrl.h
+++ b/arch/x86/include/asm/resctrl.h
@@ -81,6 +81,15 @@ static void __resctrl_sched_in(void)
 	}
 }
 
+static inline unsigned int resctrl_arch_round_mon_val(unsigned int val)
+{
+	unsigned int scale = boot_cpu_data.x86_cache_occ_scale;
+
+	/* h/w works in units of "boot_cpu_data.x86_cache_occ_scale" */
+	val /= scale;
+	return val * scale;
+}
+
 static inline void resctrl_sched_in(void)
 {
 	if (static_branch_likely(&rdt_enable_key))
diff --git a/arch/x86/kernel/cpu/resctrl/internal.h b/arch/x86/kernel/cpu/resctrl/internal.h
index bdb55c2fbdd3..c05e9b7cf77a 100644
--- a/arch/x86/kernel/cpu/resctrl/internal.h
+++ b/arch/x86/kernel/cpu/resctrl/internal.h
@@ -98,7 +98,6 @@ struct rmid_read {
 	u64			val;
 };
 
-extern unsigned int resctrl_cqm_threshold;
 extern bool rdt_alloc_capable;
 extern bool rdt_mon_capable;
 extern unsigned int rdt_mon_features;
diff --git a/arch/x86/kernel/cpu/resctrl/monitor.c b/arch/x86/kernel/cpu/resctrl/monitor.c
index 27bb4947a176..e91afe99b763 100644
--- a/arch/x86/kernel/cpu/resctrl/monitor.c
+++ b/arch/x86/kernel/cpu/resctrl/monitor.c
@@ -17,7 +17,10 @@
 
 #include <linux/module.h>
 #include <linux/slab.h>
+
 #include <asm/cpu_device_id.h>
+#include <asm/resctrl.h>
+
 #include "internal.h"
 
 struct rmid_entry {
@@ -37,8 +40,8 @@ static LIST_HEAD(rmid_free_lru);
  * @rmid_limbo_count     count of currently unused but (potentially)
  *     dirty RMIDs.
  *     This counts RMIDs that no one is currently using but that
- *     may have a occupancy value > intel_cqm_threshold. User can change
- *     the threshold occupancy value.
+ *     may have a occupancy value > resctrl_rmid_realloc_threshold. User can
+ *     change the threshold occupancy value.
  */
 static unsigned int rmid_limbo_count;
 
@@ -59,10 +62,10 @@ bool rdt_mon_capable;
 unsigned int rdt_mon_features;
 
 /*
- * This is the threshold cache occupancy at which we will consider an
+ * This is the threshold cache occupancy in bytes at which we will consider an
  * RMID available for re-allocation.
  */
-unsigned int resctrl_cqm_threshold;
+unsigned int resctrl_rmid_realloc_threshold;
 
 #define CF(cf)	((unsigned long)(1048576 * (cf) + 0.5))
 
@@ -223,14 +226,13 @@ int resctrl_arch_rmid_read(struct rdt_resource *r, struct rdt_domain *d,
  */
 void __check_limbo(struct rdt_domain *d, bool force_free)
 {
+	struct rdt_resource *r = &rdt_resources_all[RDT_RESOURCE_L3].r_resctrl;
+	struct rdt_hw_resource *hw_res = resctrl_to_arch_res(r);
 	struct rmid_entry *entry;
-	struct rdt_resource *r;
 	u32 crmid = 1, nrmid;
 	bool rmid_dirty;
 	u64 val = 0;
 
-	r = &rdt_resources_all[RDT_RESOURCE_L3].r_resctrl;
-
 	/*
 	 * Skip RMID 0 and start from RMID 1 and check all the RMIDs that
 	 * are marked as busy for occupancy < threshold. If the occupancy
@@ -245,10 +247,12 @@ void __check_limbo(struct rdt_domain *d, bool force_free)
 		entry = __rmid_entry(nrmid);
 
 		if (resctrl_arch_rmid_read(r, d, entry->rmid,
-					   QOS_L3_OCCUP_EVENT_ID, &val))
+					   QOS_L3_OCCUP_EVENT_ID, &val)) {
 			rmid_dirty = true;
-		else
-			rmid_dirty = (val >= resctrl_cqm_threshold);
+		} else {
+			val *= hw_res->mon_scale;
+			rmid_dirty = (val >= resctrl_rmid_realloc_threshold);
+		}
 
 		if (force_free || !rmid_dirty) {
 			clear_bit(entry->rmid, d->rmid_busy_llc);
@@ -289,13 +293,12 @@ int alloc_rmid(void)
 
 static void add_rmid_to_limbo(struct rmid_entry *entry)
 {
-	struct rdt_resource *r;
+	struct rdt_resource *r = &rdt_resources_all[RDT_RESOURCE_L3].r_resctrl;
+	struct rdt_hw_resource *hw_res = resctrl_to_arch_res(r);
 	struct rdt_domain *d;
 	int cpu, err;
 	u64 val = 0;
 
-	r = &rdt_resources_all[RDT_RESOURCE_L3].r_resctrl;
-
 	entry->busy = 0;
 	cpu = get_cpu();
 	list_for_each_entry(d, &r->domains, list) {
@@ -303,7 +306,8 @@ static void add_rmid_to_limbo(struct rmid_entry *entry)
 			err = resctrl_arch_rmid_read(r, d, entry->rmid,
 						     QOS_L3_OCCUP_EVENT_ID,
 						     &val);
-			if (err || val <= resctrl_cqm_threshold)
+			val *= hw_res->mon_scale;
+			if (err || val <= resctrl_rmid_realloc_threshold)
 				continue;
 		}
 
@@ -744,6 +748,7 @@ int rdt_get_mon_l3_config(struct rdt_resource *r)
 	unsigned int mbm_offset = boot_cpu_data.x86_cache_mbm_width_offset;
 	struct rdt_hw_resource *hw_res = resctrl_to_arch_res(r);
 	unsigned int cl_size = boot_cpu_data.x86_cache_size;
+	unsigned int threshold;
 	int ret;
 
 	hw_res->mon_scale = boot_cpu_data.x86_cache_occ_scale;
@@ -762,10 +767,14 @@ int rdt_get_mon_l3_config(struct rdt_resource *r)
 	 *
 	 * For a 35MB LLC and 56 RMIDs, this is ~1.8% of the LLC.
 	 */
-	resctrl_cqm_threshold = cl_size * 1024 / r->num_rmid;
+	threshold = cl_size * 1024 / r->num_rmid;
 
-	/* h/w works in units of "boot_cpu_data.x86_cache_occ_scale" */
-	resctrl_cqm_threshold /= hw_res->mon_scale;
+	/*
+	 * Because num_rmid may not be a power of two, round the value
+	 * to the nearest multiple of hw_res->mon_scale so it matches a
+	 * value the hardware will measure. mon_scale may not be a power of 2.
+	 */
+	resctrl_rmid_realloc_threshold = resctrl_arch_round_mon_val(threshold);
 
 	ret = dom_data_init(r);
 	if (ret)
diff --git a/arch/x86/kernel/cpu/resctrl/rdtgroup.c b/arch/x86/kernel/cpu/resctrl/rdtgroup.c
index 572fc07c9608..ae77ea5f323a 100644
--- a/arch/x86/kernel/cpu/resctrl/rdtgroup.c
+++ b/arch/x86/kernel/cpu/resctrl/rdtgroup.c
@@ -1030,10 +1030,7 @@ static int rdt_delay_linear_show(struct kernfs_open_file *of,
 static int max_threshold_occ_show(struct kernfs_open_file *of,
 				  struct seq_file *seq, void *v)
 {
-	struct rdt_resource *r = of->kn->parent->priv;
-	struct rdt_hw_resource *hw_res = resctrl_to_arch_res(r);
-
-	seq_printf(seq, "%u\n", resctrl_cqm_threshold * hw_res->mon_scale);
+	seq_printf(seq, "%u\n", resctrl_rmid_realloc_threshold);
 
 	return 0;
 }
@@ -1055,7 +1052,6 @@ static int rdt_thread_throttle_mode_show(struct kernfs_open_file *of,
 static ssize_t max_threshold_occ_write(struct kernfs_open_file *of,
 				       char *buf, size_t nbytes, loff_t off)
 {
-	struct rdt_hw_resource *hw_res;
 	unsigned int bytes;
 	int ret;
 
@@ -1066,8 +1062,7 @@ static ssize_t max_threshold_occ_write(struct kernfs_open_file *of,
 	if (bytes > (boot_cpu_data.x86_cache_size * 1024))
 		return -EINVAL;
 
-	hw_res = resctrl_to_arch_res(of->kn->parent->priv);
-	resctrl_cqm_threshold = bytes / hw_res->mon_scale;
+	resctrl_rmid_realloc_threshold = resctrl_arch_round_mon_val(bytes);
 
 	return nbytes;
 }
diff --git a/include/linux/resctrl.h b/include/linux/resctrl.h
index 7ccfa0d1bb34..9995d043650a 100644
--- a/include/linux/resctrl.h
+++ b/include/linux/resctrl.h
@@ -250,4 +250,6 @@ int resctrl_arch_rmid_read(struct rdt_resource *r, struct rdt_domain *d,
 void resctrl_arch_reset_rmid(struct rdt_resource *r, struct rdt_domain *d,
 			     u32 rmid, enum resctrl_event_id eventid);
 
+extern unsigned int resctrl_rmid_realloc_threshold;
+
 #endif /* _RESCTRL_H */
-- 
2.30.2

[PATCH v5 20/21] x86/resctrl: Add resctrl_rmid_realloc_limit to abstract x86's boot_cpu_data

[James Morse]

resctrl_rmid_realloc_threshold can be set by user-space. The maximum
value is specified by the architecture.

Currently max_threshold_occ_write() reads the maximum value from
boot_cpu_data.x86_cache_size, which is not portable to another
architecture.

Add resctrl_rmid_realloc_limit to describe the maximum size in bytes
that user-space can set the threshold to.

Reviewed-by: Jamie Iles <quic_jiles@quicinc.com>
Tested-by: Xin Hao <xhao@linux.alibaba.com>
Reviewed-by: Shaopeng Tan <tan.shaopeng@fujitsu.com>
Tested-by: Shaopeng Tan <tan.shaopeng@fujitsu.com>
Tested-by: Cristian Marussi <cristian.marussi@arm.com>
Signed-off-by: James Morse <james.morse@arm.com>
---
 arch/x86/kernel/cpu/resctrl/monitor.c  | 9 +++++++--
 arch/x86/kernel/cpu/resctrl/rdtgroup.c | 2 +-
 include/linux/resctrl.h                | 1 +
 3 files changed, 9 insertions(+), 3 deletions(-)

diff --git a/arch/x86/kernel/cpu/resctrl/monitor.c b/arch/x86/kernel/cpu/resctrl/monitor.c
index e91afe99b763..8d15568d7121 100644
--- a/arch/x86/kernel/cpu/resctrl/monitor.c
+++ b/arch/x86/kernel/cpu/resctrl/monitor.c
@@ -67,6 +67,11 @@ unsigned int rdt_mon_features;
  */
 unsigned int resctrl_rmid_realloc_threshold;
 
+/*
+ * This is the maximum value for the reallocation threshold, in bytes.
+ */
+unsigned int resctrl_rmid_realloc_limit;
+
 #define CF(cf)	((unsigned long)(1048576 * (cf) + 0.5))
 
 /*
@@ -747,10 +752,10 @@ int rdt_get_mon_l3_config(struct rdt_resource *r)
 {
 	unsigned int mbm_offset = boot_cpu_data.x86_cache_mbm_width_offset;
 	struct rdt_hw_resource *hw_res = resctrl_to_arch_res(r);
-	unsigned int cl_size = boot_cpu_data.x86_cache_size;
 	unsigned int threshold;
 	int ret;
 
+	resctrl_rmid_realloc_limit = boot_cpu_data.x86_cache_size * 1024;
 	hw_res->mon_scale = boot_cpu_data.x86_cache_occ_scale;
 	r->num_rmid = boot_cpu_data.x86_cache_max_rmid + 1;
 	hw_res->mbm_width = MBM_CNTR_WIDTH_BASE;
@@ -767,7 +772,7 @@ int rdt_get_mon_l3_config(struct rdt_resource *r)
 	 *
 	 * For a 35MB LLC and 56 RMIDs, this is ~1.8% of the LLC.
 	 */
-	threshold = cl_size * 1024 / r->num_rmid;
+	threshold = resctrl_rmid_realloc_limit / r->num_rmid;
 
 	/*
 	 * Because num_rmid may not be a power of two, round the value
diff --git a/arch/x86/kernel/cpu/resctrl/rdtgroup.c b/arch/x86/kernel/cpu/resctrl/rdtgroup.c
index ae77ea5f323a..1b714523dc26 100644
--- a/arch/x86/kernel/cpu/resctrl/rdtgroup.c
+++ b/arch/x86/kernel/cpu/resctrl/rdtgroup.c
@@ -1059,7 +1059,7 @@ static ssize_t max_threshold_occ_write(struct kernfs_open_file *of,
 	if (ret)
 		return ret;
 
-	if (bytes > (boot_cpu_data.x86_cache_size * 1024))
+	if (bytes > resctrl_rmid_realloc_limit)
 		return -EINVAL;
 
 	resctrl_rmid_realloc_threshold = resctrl_arch_round_mon_val(bytes);
diff --git a/include/linux/resctrl.h b/include/linux/resctrl.h
index 9995d043650a..cb857f753322 100644
--- a/include/linux/resctrl.h
+++ b/include/linux/resctrl.h
@@ -251,5 +251,6 @@ void resctrl_arch_reset_rmid(struct rdt_resource *r, struct rdt_domain *d,
 			     u32 rmid, enum resctrl_event_id eventid);
 
 extern unsigned int resctrl_rmid_realloc_threshold;
+extern unsigned int resctrl_rmid_realloc_limit;
 
 #endif /* _RESCTRL_H */
-- 
2.30.2

[PATCH v5 21/21] x86/resctrl: Make resctrl_arch_rmid_read() return values in bytes

[James Morse]

resctrl_arch_rmid_read() returns a value in chunks, as read from the
hardware. This needs scaling to bytes by mon_scale, as provided by
the architecture code.

Now that resctrl_arch_rmid_read() performs the overflow and corrections
itself, it may as well return a value in bytes directly. This allows
the accesses to the architecture specific 'hw' structure to be removed.

Move the mon_scale conversion into resctrl_arch_rmid_read().
mbm_bw_count() is updated to calculate bandwidth from bytes.

Reviewed-by: Jamie Iles <quic_jiles@quicinc.com>
Tested-by: Xin Hao <xhao@linux.alibaba.com>
Reviewed-by: Shaopeng Tan <tan.shaopeng@fujitsu.com>
Tested-by: Shaopeng Tan <tan.shaopeng@fujitsu.com>
Tested-by: Cristian Marussi <cristian.marussi@arm.com>
Signed-off-by: James Morse <james.morse@arm.com>
---
Changes since v3:
 * Only set val in one place in restrl_arch_rmid_read()
 * Use SZ_1M to improve readability
---
 arch/x86/kernel/cpu/resctrl/ctrlmondata.c |  6 ++----
 arch/x86/kernel/cpu/resctrl/internal.h    |  4 ++--
 arch/x86/kernel/cpu/resctrl/monitor.c     | 24 +++++++++++------------
 include/linux/resctrl.h                   |  2 +-
 4 files changed, 16 insertions(+), 20 deletions(-)

diff --git a/arch/x86/kernel/cpu/resctrl/ctrlmondata.c b/arch/x86/kernel/cpu/resctrl/ctrlmondata.c
index d3f7eb2ac14b..03fc91d8bc9f 100644
--- a/arch/x86/kernel/cpu/resctrl/ctrlmondata.c
+++ b/arch/x86/kernel/cpu/resctrl/ctrlmondata.c
@@ -549,7 +549,6 @@ void mon_event_read(struct rmid_read *rr, struct rdt_resource *r,
 int rdtgroup_mondata_show(struct seq_file *m, void *arg)
 {
 	struct kernfs_open_file *of = m->private;
-	struct rdt_hw_resource *hw_res;
 	u32 resid, evtid, domid;
 	struct rdtgroup *rdtgrp;
 	struct rdt_resource *r;
@@ -569,8 +568,7 @@ int rdtgroup_mondata_show(struct seq_file *m, void *arg)
 	domid = md.u.domid;
 	evtid = md.u.evtid;
 
-	hw_res = &rdt_resources_all[resid];
-	r = &hw_res->r_resctrl;
+	r = &rdt_resources_all[resid].r_resctrl;
 	d = rdt_find_domain(r, domid, NULL);
 	if (IS_ERR_OR_NULL(d)) {
 		ret = -ENOENT;
@@ -584,7 +582,7 @@ int rdtgroup_mondata_show(struct seq_file *m, void *arg)
 	else if (rr.err == -EINVAL)
 		seq_puts(m, "Unavailable\n");
 	else
-		seq_printf(m, "%llu\n", rr.val * hw_res->mon_scale);
+		seq_printf(m, "%llu\n", rr.val);
 
 out:
 	rdtgroup_kn_unlock(of->kn);
diff --git a/arch/x86/kernel/cpu/resctrl/internal.h b/arch/x86/kernel/cpu/resctrl/internal.h
index c05e9b7cf77a..5f7128686cfd 100644
--- a/arch/x86/kernel/cpu/resctrl/internal.h
+++ b/arch/x86/kernel/cpu/resctrl/internal.h
@@ -279,13 +279,13 @@ struct rftype {
 
 /**
  * struct mbm_state - status for each MBM counter in each domain
- * @prev_bw_chunks: Previous chunks value read for bandwidth calculation
+ * @prev_bw_bytes: Previous bytes value read for bandwidth calculation
  * @prev_bw:	The most recent bandwidth in MBps
  * @delta_bw:	Difference between the current and previous bandwidth
  * @delta_comp:	Indicates whether to compute the delta_bw
  */
 struct mbm_state {
-	u64	prev_bw_chunks;
+	u64	prev_bw_bytes;
 	u32	prev_bw;
 	u32	delta_bw;
 	bool	delta_comp;
diff --git a/arch/x86/kernel/cpu/resctrl/monitor.c b/arch/x86/kernel/cpu/resctrl/monitor.c
index 8d15568d7121..efe0c30d3a12 100644
--- a/arch/x86/kernel/cpu/resctrl/monitor.c
+++ b/arch/x86/kernel/cpu/resctrl/monitor.c
@@ -16,6 +16,7 @@
  */
 
 #include <linux/module.h>
+#include <linux/sizes.h>
 #include <linux/slab.h>
 
 #include <asm/cpu_device_id.h>
@@ -189,7 +190,7 @@ int resctrl_arch_rmid_read(struct rdt_resource *r, struct rdt_domain *d,
 	struct rdt_hw_resource *hw_res = resctrl_to_arch_res(r);
 	struct rdt_hw_domain *hw_dom = resctrl_to_arch_dom(d);
 	struct arch_mbm_state *am;
-	u64 msr_val;
+	u64 msr_val, chunks;
 
 	if (!cpumask_test_cpu(smp_processor_id(), &d->cpu_mask))
 		return -EINVAL;
@@ -214,12 +215,14 @@ int resctrl_arch_rmid_read(struct rdt_resource *r, struct rdt_domain *d,
 	if (am) {
 		am->chunks += mbm_overflow_count(am->prev_msr, msr_val,
 						 hw_res->mbm_width);
-		*val = get_corrected_mbm_count(rmid, am->chunks);
+		chunks = get_corrected_mbm_count(rmid, am->chunks);
 		am->prev_msr = msr_val;
 	} else {
-		*val = msr_val;
+		chunks = msr_val;
 	}
 
+	*val = chunks * hw_res->mon_scale;
+
 	return 0;
 }
 
@@ -232,7 +235,6 @@ int resctrl_arch_rmid_read(struct rdt_resource *r, struct rdt_domain *d,
 void __check_limbo(struct rdt_domain *d, bool force_free)
 {
 	struct rdt_resource *r = &rdt_resources_all[RDT_RESOURCE_L3].r_resctrl;
-	struct rdt_hw_resource *hw_res = resctrl_to_arch_res(r);
 	struct rmid_entry *entry;
 	u32 crmid = 1, nrmid;
 	bool rmid_dirty;
@@ -255,7 +257,6 @@ void __check_limbo(struct rdt_domain *d, bool force_free)
 					   QOS_L3_OCCUP_EVENT_ID, &val)) {
 			rmid_dirty = true;
 		} else {
-			val *= hw_res->mon_scale;
 			rmid_dirty = (val >= resctrl_rmid_realloc_threshold);
 		}
 
@@ -299,7 +300,6 @@ int alloc_rmid(void)
 static void add_rmid_to_limbo(struct rmid_entry *entry)
 {
 	struct rdt_resource *r = &rdt_resources_all[RDT_RESOURCE_L3].r_resctrl;
-	struct rdt_hw_resource *hw_res = resctrl_to_arch_res(r);
 	struct rdt_domain *d;
 	int cpu, err;
 	u64 val = 0;
@@ -311,7 +311,6 @@ static void add_rmid_to_limbo(struct rmid_entry *entry)
 			err = resctrl_arch_rmid_read(r, d, entry->rmid,
 						     QOS_L3_OCCUP_EVENT_ID,
 						     &val);
-			val *= hw_res->mon_scale;
 			if (err || val <= resctrl_rmid_realloc_threshold)
 				continue;
 		}
@@ -403,15 +402,14 @@ static int __mon_event_count(u32 rmid, struct rmid_read *rr)
  */
 static void mbm_bw_count(u32 rmid, struct rmid_read *rr)
 {
-	struct rdt_hw_resource *hw_res = resctrl_to_arch_res(rr->r);
 	struct mbm_state *m = &rr->d->mbm_local[rmid];
-	u64 cur_bw, chunks, cur_chunks;
+	u64 cur_bw, bytes, cur_bytes;
 
-	cur_chunks = rr->val;
-	chunks = cur_chunks - m->prev_bw_chunks;
-	m->prev_bw_chunks = cur_chunks;
+	cur_bytes = rr->val;
+	bytes = cur_bytes - m->prev_bw_bytes;
+	m->prev_bw_bytes = cur_bytes;
 
-	cur_bw = (chunks * hw_res->mon_scale) >> 20;
+	cur_bw = bytes / SZ_1M;
 
 	if (m->delta_comp)
 		m->delta_bw = abs(cur_bw - m->prev_bw);
diff --git a/include/linux/resctrl.h b/include/linux/resctrl.h
index cb857f753322..0cf5b20c6ddf 100644
--- a/include/linux/resctrl.h
+++ b/include/linux/resctrl.h
@@ -227,7 +227,7 @@ void resctrl_offline_domain(struct rdt_resource *r, struct rdt_domain *d);
  * @d:			domain that the counter should be read from.
  * @rmid:		rmid of the counter to read.
  * @eventid:		eventid to read, e.g. L3 occupancy.
- * @val:		result of the counter read in chunks.
+ * @val:		result of the counter read in bytes.
  *
  * Call from process context on a CPU that belongs to domain @d.
  *
-- 
2.30.2

RE: [PATCH v5 04/21] x86/resctrl: Group struct rdt_hw_domain cleanup

[tan.shaopeng]

Hi James,

> domain_add_cpu() and domain_remove_cpu() need to kfree() the child arrays
> that were allocated by domain_setup_ctrlval().
> 
> As this memory is moved around, and new arrays are created, adjusting the
> error handling cleanup code becomes noisier.
> 
> To simplify this, move all the kfree() calls into a domain_free() helper.
> This depends on struct rdt_hw_domain being kzalloc()d, allowing it to
> unconditionally kfree() all the child arrays.
> 
> Reviewed-by: Jamie Iles <quic_jiles@quicinc.com>
> Tested-by: Xin Hao <xhao@linux.alibaba.com>
> Reviewed-by: Shaopeng Tan <tan.shaopeng@fujitsu.com>
> Tested-by: Shaopeng Tan <tan.shaopeng@fujitsu.com>
> Tested-by: Cristian Marussi <cristian.marussi@arm.com>
> Signed-off-by: James Morse <james.morse@arm.com>
> ---
> Changes since v2:
>  * Made domain_free() static.
> 
> Changes since v1:
>  * This patch is new
> ---
>  arch/x86/kernel/cpu/resctrl/core.c | 17 ++++++++++-------
>  1 file changed, 10 insertions(+), 7 deletions(-)
> 
> diff --git a/arch/x86/kernel/cpu/resctrl/core.c
> b/arch/x86/kernel/cpu/resctrl/core.c
> index 25f30148478b..e37889f7a1a5 100644
> --- a/arch/x86/kernel/cpu/resctrl/core.c
> +++ b/arch/x86/kernel/cpu/resctrl/core.c
> @@ -414,6 +414,13 @@ void setup_default_ctrlval(struct rdt_resource *r, u32
> *dc, u32 *dm)
>  	}
>  }
> 
> +static void domain_free(struct rdt_hw_domain *hw_dom) {
> +	kfree(hw_dom->ctrl_val);
> +	kfree(hw_dom->mbps_val);
> +	kfree(hw_dom);
> +}
> +
>  static int domain_setup_ctrlval(struct rdt_resource *r, struct rdt_domain *d)  {
>  	struct rdt_hw_resource *hw_res = resctrl_to_arch_res(r); @@ -488,7
> +495,7 @@ static void domain_add_cpu(int cpu, struct rdt_resource *r)
>  	rdt_domain_reconfigure_cdp(r);
> 
>  	if (r->alloc_capable && domain_setup_ctrlval(r, d)) {
> -		kfree(hw_dom);
> +		domain_free(hw_dom);

domain_free(hw_dom) is executed when fails allocated hw_dom->ctrl_val 
by kmalloc_array() in domain_setup_ctrlval(r, d), 
but hw_dom->ctrl_val is freed in domain_free(hw_dom).

Also, hw_dom->mbps_val is not allocated at this time,
but it is freed in domain_free(hw_dom).

In addition，I tested this patch series on Intel(R) Xeon(R) Gold 6254 CPU with resctrl selftest.
It is no problem.

Best regards,
Shaopeng
>  		return;
>  	}
> 
> @@ -497,9 +504,7 @@ static void domain_add_cpu(int cpu, struct rdt_resource
> *r)
>  	err = resctrl_online_domain(r, d);
>  	if (err) {
>  		list_del(&d->list);
> -		kfree(hw_dom->ctrl_val);
> -		kfree(hw_dom->mbps_val);
> -		kfree(hw_dom);
> +		domain_free(hw_dom);
>  	}
>  }
> 
> @@ -547,12 +552,10 @@ static void domain_remove_cpu(int cpu, struct
> rdt_resource *r)
>  		if (d->plr)
>  			d->plr->d = NULL;
> 
> -		kfree(hw_dom->ctrl_val);
> -		kfree(hw_dom->mbps_val);
>  		bitmap_free(d->rmid_busy_llc);
>  		kfree(d->mbm_total);
>  		kfree(d->mbm_local);
> -		kfree(hw_dom);
> +		domain_free(hw_dom);
>  		return;
>  	}
> 
> --
> 2.30.2

Re: [PATCH v5 04/21] x86/resctrl: Group struct rdt_hw_domain cleanup

[James Morse]

Hi Shaopeng,

On 29/06/2022 09:33, tan.shaopeng@fujitsu.com wrote:
>> domain_add_cpu() and domain_remove_cpu() need to kfree() the child arrays
>> that were allocated by domain_setup_ctrlval().
>>
>> As this memory is moved around, and new arrays are created, adjusting the
>> error handling cleanup code becomes noisier.
>>
>> To simplify this, move all the kfree() calls into a domain_free() helper.
>> This depends on struct rdt_hw_domain being kzalloc()d, allowing it to
>> unconditionally kfree() all the child arrays.

>> diff --git a/arch/x86/kernel/cpu/resctrl/core.c
>> b/arch/x86/kernel/cpu/resctrl/core.c
>> index 25f30148478b..e37889f7a1a5 100644
>> --- a/arch/x86/kernel/cpu/resctrl/core.c
>> +++ b/arch/x86/kernel/cpu/resctrl/core.c
>> @@ -414,6 +414,13 @@ void setup_default_ctrlval(struct rdt_resource *r, u32
>> *dc, u32 *dm)
>>  	}
>>  }
>>
>> +static void domain_free(struct rdt_hw_domain *hw_dom) {
>> +	kfree(hw_dom->ctrl_val);
>> +	kfree(hw_dom->mbps_val);
>> +	kfree(hw_dom);
>> +}
>> +
>>  static int domain_setup_ctrlval(struct rdt_resource *r, struct rdt_domain *d)  {
>>  	struct rdt_hw_resource *hw_res = resctrl_to_arch_res(r); @@ -488,7
>> +495,7 @@ static void domain_add_cpu(int cpu, struct rdt_resource *r)
>>  	rdt_domain_reconfigure_cdp(r);
>>
>>  	if (r->alloc_capable && domain_setup_ctrlval(r, d)) {
>> -		kfree(hw_dom);
>> +		domain_free(hw_dom);

> domain_free(hw_dom) is executed when fails allocated hw_dom->ctrl_val 
> by kmalloc_array() in domain_setup_ctrlval(r, d), 
> but hw_dom->ctrl_val is freed in domain_free(hw_dom).
> 
> Also, hw_dom->mbps_val is not allocated at this time,
> but it is freed in domain_free(hw_dom).

Yes, this is deliberate. These cases end up doing:
|	kfree(NULL);
which is harmless. kfree() checks for a NULL argument and does nothing.

The alternative would be to spread the cleanup all over the place, so it only calls
kfree() on something that has been allocated - this would be more complex and easier to
miss something.


> In addition，I tested this patch series on Intel(R) Xeon(R) Gold 6254 CPU with resctrl selftest.
> It is no problem.

Thanks!

James

RE: [PATCH v5 04/21] x86/resctrl: Group struct rdt_hw_domain cleanup

[tan.shaopeng]

Hi James

> On 29/06/2022 09:33, tan.shaopeng@fujitsu.com wrote:
> >> domain_add_cpu() and domain_remove_cpu() need to kfree() the child
> >> arrays that were allocated by domain_setup_ctrlval().
> >>
> >> As this memory is moved around, and new arrays are created, adjusting
> >> the error handling cleanup code becomes noisier.
> >>
> >> To simplify this, move all the kfree() calls into a domain_free() helper.
> >> This depends on struct rdt_hw_domain being kzalloc()d, allowing it to
> >> unconditionally kfree() all the child arrays.
> 
> >> diff --git a/arch/x86/kernel/cpu/resctrl/core.c
> >> b/arch/x86/kernel/cpu/resctrl/core.c
> >> index 25f30148478b..e37889f7a1a5 100644
> >> --- a/arch/x86/kernel/cpu/resctrl/core.c
> >> +++ b/arch/x86/kernel/cpu/resctrl/core.c
> >> @@ -414,6 +414,13 @@ void setup_default_ctrlval(struct rdt_resource
> >> *r, u32 *dc, u32 *dm)
> >>  	}
> >>  }
> >>
> >> +static void domain_free(struct rdt_hw_domain *hw_dom) {
> >> +	kfree(hw_dom->ctrl_val);
> >> +	kfree(hw_dom->mbps_val);
> >> +	kfree(hw_dom);
> >> +}
> >> +
> >>  static int domain_setup_ctrlval(struct rdt_resource *r, struct rdt_domain
> *d)  {
> >>  	struct rdt_hw_resource *hw_res = resctrl_to_arch_res(r); @@ -488,7
> >> +495,7 @@ static void domain_add_cpu(int cpu, struct rdt_resource *r)
> >>  	rdt_domain_reconfigure_cdp(r);
> >>
> >>  	if (r->alloc_capable && domain_setup_ctrlval(r, d)) {
> >> -		kfree(hw_dom);
> >> +		domain_free(hw_dom);
> 
> > domain_free(hw_dom) is executed when fails allocated hw_dom->ctrl_val
> > by kmalloc_array() in domain_setup_ctrlval(r, d), but hw_dom->ctrl_val
> > is freed in domain_free(hw_dom).
> >
> > Also, hw_dom->mbps_val is not allocated at this time, but it is freed
> > in domain_free(hw_dom).
> 
> Yes, this is deliberate. These cases end up doing:
> |	kfree(NULL);
> which is harmless. kfree() checks for a NULL argument and does nothing.
> 
> The alternative would be to spread the cleanup all over the place, so it only calls
> kfree() on something that has been allocated - this would be more complex and
> easier to miss something.

Thank you for explaining. I learned.

Best regards,
Shaopeng

Re: [PATCH v5 00/21] x86/resctrl: Make resctrl_arch_rmid_read() return values in bytes

[Xin Hao]

Hi  james,

I have a review all of the patches, it looks goot to me, but i also test 
them once again, i have a little confusion with my test.

# mkdir p1

# echo "L3:0=001;1=001" > p1/schemata

# [root@iZbp1bu26qv0j3ddyusot3Z p1]# cat schemata
     MB:0=100;1=100
     L3:0=001;1=001

# memhog -r1000000 1000m > /mnt/log &

[1] 53023
[root@iZbp1bu26qv0j3ddyusot3Z p1]# echo 53023 > tasks
[
[root@iZbp1bu26qv0j3ddyusot3Z p1]# cat mon_data/mon_L3_00/llc_occupancy
3833856
[root@iZbp1bu26qv0j3ddyusot3Z p1]# cat mon_data/mon_L3_00/llc_occupancy
3620864
[root@iZbp1bu26qv0j3ddyusot3Z p1]# cat mon_data/mon_L3_00/llc_occupancy
3727360
[root@iZbp1bu26qv0j3ddyusot3Z p1]# cat size
     MB:0=100;1=100
     L3:0=3407872;1=3407872

Obviously, the value has been overflowed,  Can you explain why？

My machine environment is:

Intel(R) Xeon(R) Platinum 8269CY CPU @ 2.50GHz

numactl -H
available: 2 nodes (0-1)
node 0 cpus: 0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 
23 24 25 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 
73 74 75 76 77
node 0 size: 191813 MB
node 0 free: 189340 MB
node 1 cpus: 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 
46 47 48 49 50 51 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 
96 97 98 99 100 101 102 103
node 1 size: 193522 MB
node 1 free: 192332 MB
node distances:
node   0   1
   0:  10  21
   1:  21  10

On 6/23/22 12:46 AM, James Morse wrote:
> Changes in this version?
>   * Use supports_mba_mbps() in resctrl_{on,off}line_domain()
>   * Remove some error handling for errors that can't happen.
>   * Restored mbps_val[] reset code to set_mba_sc().
>   * Moved mbps_val[] reset in rdtgroup_init_mba() to reduce noise.
>   * Added resctrl_arch_round_mon_val() to fix the user provided value.
>
> ---
> The aim of this series is to insert a split between the parts of the monitor
> code that the architecture must implement, and those that are part of the
> resctrl filesystem. The eventual aim is to move all filesystem parts out
> to live in /fs/resctrl, so that resctrl can be wired up for MPAM.
>
> What's MPAM? See the cover letter of a previous series. [1]
>
> The series adds domain online/offline callbacks to allow the filesystem to
> manage some of its structures itself, then moves all the 'mba_sc' behaviour
> to be part of the filesystem.
> This means another architecture doesn't need to provide an mbps_val array.
> As its all software, the resctrl filesystem should be able to do this without
> any help from the architecture code.
>
> Finally __rmid_read() is refactored to be the API call that the architecture
> provides to read a counter value. All the hardware specific overflow detection,
> scaling and value correction should occur behind this helper.
>
>
> This series is based on v5.19-rc1, and can be retrieved from:
> git://git.kernel.org/pub/scm/linux/kernel/git/morse/linux.git mpam/resctrl_monitors_in_bytes/v5
>
> [0] git://git.kernel.org/pub/scm/linux/kernel/git/morse/linux.git mpam/resctrl_merge_cdp/v7
> [1] https://lore.kernel.org/lkml/20210728170637.25610-1-james.morse@arm.com/
>
> [v1] https://lore.kernel.org/lkml/20210729223610.29373-1-james.morse@arm.com/
> [v2] https://lore.kernel.org/lkml/20211001160302.31189-1-james.morse@arm.com/
> [v3] https://lore.kernel.org/lkml/20220217182110.7176-1-james.morse@arm.com/
> [v4] https://lore.kernel.org/lkml/20220412124419.30689-1-james.morse@arm.com/
>
> James Morse (21):
>    x86/resctrl: Kill off alloc_enabled
>    x86/resctrl: Merge mon_capable and mon_enabled
>    x86/resctrl: Add domain online callback for resctrl work
>    x86/resctrl: Group struct rdt_hw_domain cleanup
>    x86/resctrl: Add domain offline callback for resctrl work
>    x86/resctrl: Remove set_mba_sc()s control array re-initialisation
>    x86/resctrl: Abstract and use supports_mba_mbps()
>    x86/resctrl: Create mba_sc configuration in the rdt_domain
>    x86/resctrl: Switch over to the resctrl mbps_val list
>    x86/resctrl: Remove architecture copy of mbps_val
>    x86/resctrl: Allow update_mba_bw() to update controls directly
>    x86/resctrl: Calculate bandwidth from the previous __mon_event_count()
>      chunks
>    x86/resctrl: Add per-rmid arch private storage for overflow and chunks
>    x86/resctrl: Allow per-rmid arch private storage to be reset
>    x86/resctrl: Abstract __rmid_read()
>    x86/resctrl: Pass the required parameters into
>      resctrl_arch_rmid_read()
>    x86/resctrl: Move mbm_overflow_count() into resctrl_arch_rmid_read()
>    x86/resctrl: Move get_corrected_mbm_count() into
>      resctrl_arch_rmid_read()
>    x86/resctrl: Rename and change the units of resctrl_cqm_threshold
>    x86/resctrl: Add resctrl_rmid_realloc_limit to abstract x86's
>      boot_cpu_data
>    x86/resctrl: Make resctrl_arch_rmid_read() return values in bytes
>
>   arch/x86/include/asm/resctrl.h            |   9 +
>   arch/x86/kernel/cpu/resctrl/core.c        | 117 ++++-------
>   arch/x86/kernel/cpu/resctrl/ctrlmondata.c |  75 ++++---
>   arch/x86/kernel/cpu/resctrl/internal.h    |  61 +++---
>   arch/x86/kernel/cpu/resctrl/monitor.c     | 232 ++++++++++++++--------
>   arch/x86/kernel/cpu/resctrl/pseudo_lock.c |   2 +-
>   arch/x86/kernel/cpu/resctrl/rdtgroup.c    | 216 ++++++++++++++++----
>   include/linux/resctrl.h                   |  64 +++++-
>   8 files changed, 514 insertions(+), 262 deletions(-)
>
-- 
Best Regards!
Xin Hao

Re: [PATCH v5 07/21] x86/resctrl: Abstract and use supports_mba_mbps()

[Reinette Chatre]

Hi James,

On 6/22/2022 9:46 AM, James Morse wrote:

...

> diff --git a/arch/x86/kernel/cpu/resctrl/rdtgroup.c b/arch/x86/kernel/cpu/resctrl/rdtgroup.c
> index b32ceff8325a..49d9e2c3c743 100644
> --- a/arch/x86/kernel/cpu/resctrl/rdtgroup.c
> +++ b/arch/x86/kernel/cpu/resctrl/rdtgroup.c
> @@ -1890,17 +1890,26 @@ void rdt_domain_reconfigure_cdp(struct rdt_resource *r)
>  }
>  
>  /*
> - * Enable or disable the MBA software controller
> - * which helps user specify bandwidth in MBps.
>   * MBA software controller is supported only if
>   * MBM is supported and MBA is in linear scale.
>   */
> +static bool supports_mba_mbps(void)
> +{
> +	struct rdt_resource *r = &rdt_resources_all[RDT_RESOURCE_MBA].r_resctrl;
> +
> +	return (is_mbm_enabled() &&
> +		r->alloc_capable && is_mba_linear());
> +}
> +
> +/*
> + * Enable or disable the MBA software controller
> + * which helps user specify bandwidth in MBps.
> + */
>  static int set_mba_sc(bool mba_sc)
>  {
>  	struct rdt_resource *r = &rdt_resources_all[RDT_RESOURCE_MBA].r_resctrl;
>  
> -	if (!is_mbm_enabled() || !is_mba_linear() ||
> -	    mba_sc == is_mba_sc(r))
> +	if (!supports_mba_mbps() || mba_sc == is_mba_sc(r))
>  		return -EINVAL;
>  
>  	r->membw.mba_sc = mba_sc;


It seems that this change is propagating an issue that exists
in the current implementation (not introduced by this work).

The supports_mba_mbps() test uses is_mbm_enabled() which is:
	(is_mbm_total_enabled() || is_mbm_local_enabled())

That is not accurate since the software controller is only called
when MBM local is enabled:
	mbm_update()
	{
		...
		if (is_mbm_local_enabled()) {
			...
			if (is_mba_sc(NULL))
				mbm_bw_count(rmid, &rr);
		}
	}
			

Could the "is_mbm_enabled()" in the new supports_mba_mbps() introduced
here be changed to use "is_mbm_local_enabled()" instead? It does not seem
an issue for existing hardware (that supports total and local) but
the kernel parameters do enable users to boot with "rdt=!mbmlocal" to
trigger problematic scenarios.

Reinette

Re: [PATCH v5 00/21] x86/resctrl: Make resctrl_arch_rmid_read() return values in bytes

[Reinette Chatre]

Hi,

On 7/3/2022 8:54 AM, Xin Hao wrote:
> Hi  james,
> 
> I have a review all of the patches, it looks goot to me, but i also test them once again, i have a little confusion with my test.
> 
> # mkdir p1
> 
> # echo "L3:0=001;1=001" > p1/schemata
> 
> # [root@iZbp1bu26qv0j3ddyusot3Z p1]# cat schemata
>     MB:0=100;1=100
>     L3:0=001;1=001
> 
> # memhog -r1000000 1000m > /mnt/log &
> 
> [1] 53023
> [root@iZbp1bu26qv0j3ddyusot3Z p1]# echo 53023 > tasks
> [
> [root@iZbp1bu26qv0j3ddyusot3Z p1]# cat mon_data/mon_L3_00/llc_occupancy
> 3833856
> [root@iZbp1bu26qv0j3ddyusot3Z p1]# cat mon_data/mon_L3_00/llc_occupancy
> 3620864
> [root@iZbp1bu26qv0j3ddyusot3Z p1]# cat mon_data/mon_L3_00/llc_occupancy
> 3727360
> [root@iZbp1bu26qv0j3ddyusot3Z p1]# cat size
>     MB:0=100;1=100
>     L3:0=3407872;1=3407872
> 
> Obviously, the value has been overflowed,  Can you explain why？

Are you seeing different behavior before and after you apply this
series?

I do not think the conclusion should immediately be that there is an
overflow issue. Have you perhaps run into the scenario "Notes on
cache occupancy monitoring and control" described in
Documentation/x86/resctrl.rst?

When "memhog" starts it can allocate to the entire L3 for a while
before it is moved to the constrained resource group. It's cache
lines are not evicted as part of this move so it is not unusual for
it to have more lines in L3 than it is allowed to allocate into.

Understanding the occupancy values require understanding of the workload
as well as the system environment.

Depending on the workload's data usage (for example if it keeps loading
new data - note that if the workload keeps loading the same data and the
data is already present in an area of cache that the workload cannot
allocate into then the data read would still result in a cache hit for the
workload, the data would not be moved to the area the
workload can allocate into) and other workloads on the system (there is
other load present also that evicts the lines owned by the workload) the
L3 occupancy rate should go down after a while to match the space it
can allocate into.

Reinette

Re: [PATCH v5 00/21] x86/resctrl: Make resctrl_arch_rmid_read() return values in bytes

[Reinette Chatre]

Hi James,

On 6/22/2022 9:46 AM, James Morse wrote:
> The aim of this series is to insert a split between the parts of the monitor
> code that the architecture must implement, and those that are part of the
> resctrl filesystem. The eventual aim is to move all filesystem parts out
> to live in /fs/resctrl, so that resctrl can be wired up for MPAM.
> 
> What's MPAM? See the cover letter of a previous series. [1]
> 
> The series adds domain online/offline callbacks to allow the filesystem to
> manage some of its structures itself, then moves all the 'mba_sc' behaviour
> to be part of the filesystem.
> This means another architecture doesn't need to provide an mbps_val array.
> As its all software, the resctrl filesystem should be able to do this without
> any help from the architecture code.
> 
> Finally __rmid_read() is refactored to be the API call that the architecture
> provides to read a counter value. All the hardware specific overflow detection,
> scaling and value correction should occur behind this helper.
> 

Thank you for your patience as I was offline for a while. 

This series looks good to me. I have one remaining comment that I provided
in reply to "[07/21] x86/resctrl: Abstract and use supports_mba_mbps()" where
it seems to me that an existing issue could easily be addressed in the new
function. 

I do not have tests for the software controller and only did basic sanity
checks. It would be great if the folks using this feature could test this
series.

Thank you very much. From my side it looks good:

Reviewed-by: Reinette Chatre <reinette.chatre@intel.com>

Reinette

Re: [PATCH v5 00/21] x86/resctrl: Make resctrl_arch_rmid_read() return values in bytes

[James Morse]

Hi Reinette,

On 23/08/2022 18:20, Reinette Chatre wrote:
> On 6/22/2022 9:46 AM, James Morse wrote:
>> The aim of this series is to insert a split between the parts of the monitor
>> code that the architecture must implement, and those that are part of the
>> resctrl filesystem. The eventual aim is to move all filesystem parts out
>> to live in /fs/resctrl, so that resctrl can be wired up for MPAM.
>>
>> What's MPAM? See the cover letter of a previous series. [1]
>>
>> The series adds domain online/offline callbacks to allow the filesystem to
>> manage some of its structures itself, then moves all the 'mba_sc' behaviour
>> to be part of the filesystem.
>> This means another architecture doesn't need to provide an mbps_val array.
>> As its all software, the resctrl filesystem should be able to do this without
>> any help from the architecture code.
>>
>> Finally __rmid_read() is refactored to be the API call that the architecture
>> provides to read a counter value. All the hardware specific overflow detection,
>> scaling and value correction should occur behind this helper.
>>
> 
> Thank you for your patience as I was offline for a while. 

No problem,


> This series looks good to me. I have one remaining comment that I provided
> in reply to "[07/21] x86/resctrl: Abstract and use supports_mba_mbps()" where
> it seems to me that an existing issue could easily be addressed in the new
> function. 

Yup, that made sense to me.


> I do not have tests for the software controller and only did basic sanity
> checks. It would be great if the folks using this feature could test this
> series.
> 
> Thank you very much. From my side it looks good:
> 
> Reviewed-by: Reinette Chatre <reinette.chatre@intel.com>


Thanks!

James

Re: [PATCH v5 00/21] x86/resctrl: Make resctrl_arch_rmid_read() return values in bytes

[haoxin]

在 2022/8/24 上午1:09, Reinette Chatre 写道:
> Hi,
>
> On 7/3/2022 8:54 AM, Xin Hao wrote:
>> Hi  james,
>>
>> I have a review all of the patches, it looks goot to me, but i also test them once again, i have a little confusion with my test.
>>
>> # mkdir p1
>>
>> # echo "L3:0=001;1=001" > p1/schemata
>>
>> # [root@iZbp1bu26qv0j3ddyusot3Z p1]# cat schemata
>>      MB:0=100;1=100
>>      L3:0=001;1=001
>>
>> # memhog -r1000000 1000m > /mnt/log &
>>
>> [1] 53023
>> [root@iZbp1bu26qv0j3ddyusot3Z p1]# echo 53023 > tasks
>> [
>> [root@iZbp1bu26qv0j3ddyusot3Z p1]# cat mon_data/mon_L3_00/llc_occupancy
>> 3833856
>> [root@iZbp1bu26qv0j3ddyusot3Z p1]# cat mon_data/mon_L3_00/llc_occupancy
>> 3620864
>> [root@iZbp1bu26qv0j3ddyusot3Z p1]# cat mon_data/mon_L3_00/llc_occupancy
>> 3727360
>> [root@iZbp1bu26qv0j3ddyusot3Z p1]# cat size
>>      MB:0=100;1=100
>>      L3:0=3407872;1=3407872
>>
>> Obviously, the value has been overflowed,  Can you explain why？
> Are you seeing different behavior before and after you apply this
> series?
No,they have the same test result。
>
> I do not think the conclusion should immediately be that there is an
> overflow issue. Have you perhaps run into the scenario "Notes on
> cache occupancy monitoring and control" described in
> Documentation/x86/resctrl.rst?
>
> When "memhog" starts it can allocate to the entire L3 for a while
> before it is moved to the constrained resource group. It's cache
> lines are not evicted as part of this move so it is not unusual for
> it to have more lines in L3 than it is allowed to allocate into.

Yes as you said, the mon_data/mon_L3_00/llc_occupancy does not 
immediately become the value small than the set by schemata,  it may 
takes a few minutes to reduce to the set value.

I don't quite understand why it takes so long to see the llc_occupancy 
degrage.

>
> Understanding the occupancy values require understanding of the workload
> as well as the system environment.
>
> Depending on the workload's data usage (for example if it keeps loading
> new data - note that if the workload keeps loading the same data and the
> data is already present in an area of cache that the workload cannot
> allocate into then the data read would still result in a cache hit for the
> workload, the data would not be moved to the area the
> workload can allocate into) and other workloads on the system (there is
> other load present also that evicts the lines owned by the workload) the
> L3 occupancy rate should go down after a while to match the space it
> can allocate into.
>
> Reinette

Re: [PATCH v5 00/21] x86/resctrl: Make resctrl_arch_rmid_read() return values in bytes

[James Morse]

Hi Hao Xin,

On 07/09/2022 06:46, haoxin wrote:
> 在 2022/8/24 上午1:09, Reinette Chatre 写道:
>> On 7/3/2022 8:54 AM, Xin Hao wrote:
>>> [root@iZbp1bu26qv0j3ddyusot3Z p1]# cat mon_data/mon_L3_00/llc_occupancy
>>> 3833856
>>> [root@iZbp1bu26qv0j3ddyusot3Z p1]# cat mon_data/mon_L3_00/llc_occupancy
>>> 3620864
>>> [root@iZbp1bu26qv0j3ddyusot3Z p1]# cat mon_data/mon_L3_00/llc_occupancy
>>> 3727360
>>> [root@iZbp1bu26qv0j3ddyusot3Z p1]# cat size
>>>      MB:0=100;1=100
>>>      L3:0=3407872;1=3407872
>>>
>>> Obviously, the value has been overflowed,  Can you explain why？

>> I do not think the conclusion should immediately be that there is an
>> overflow issue. Have you perhaps run into the scenario "Notes on
>> cache occupancy monitoring and control" described in
>> Documentation/x86/resctrl.rst?
>>
>> When "memhog" starts it can allocate to the entire L3 for a while
>> before it is moved to the constrained resource group. It's cache
>> lines are not evicted as part of this move so it is not unusual for
>> it to have more lines in L3 than it is allowed to allocate into.
> 
> Yes as you said, the mon_data/mon_L3_00/llc_occupancy does not immediately become the
> value small than the set by schemata,  it may takes a few minutes to reduce to the set value.
> 
> I don't quite understand why it takes so long to see the llc_occupancy degrage.

Do you have workloads in other control groups causing cache allocations?

One of the ways this stuff can be built is for the cache to use the policy to choose which
lines to evict. The cache may already have some LRU or line-state preferences when it
comes to eviction, so it may not apply the RDT policy as the first choice.

If there is no cache pressure from outside the control group - does it matter how quickly
it takes to apply?


Thanks,

James