cgroups and iptables problems running docker

* cgroups and iptables problems running docker - maybe my config wrong?
@ 2018-05-31 11:00 Jakob Hasse
  2018-05-31 11:44 ` Bruce Ashfield
  0 siblings, 1 reply; 9+ messages in thread
From: Jakob Hasse @ 2018-05-31 11:00 UTC (permalink / raw)
  To: Yocto List

Hello,
I ran into trouble running docker on our target.
1. When I want to start docker, I first have to re-mount cgroups:
root@target:~# cgroups-umount
root@target:~# cgroups-mount
Otherwise docker would produce an error:
ERRO[0002] Failed to built-in GetDriver graph btrfs /var/lib/docker

2. When I then start dockerd, it complains about a missing nat table:
root@target:~# dockerd
INFO[0000] libcontainerd: new containerd process, pid: 929
WARN[0000] containerd: low RLIMIT_NOFILE changing to max current=1024 
max=4096
INFO[0001] [graphdriver] using prior storage driver: overlay2
INFO[0001] Graph migration to content-addressability took 0.00 seconds
WARN[0001] Your kernel does not support cgroup memory limit
WARN[0001] Unable to find cpu cgroup in mounts
WARN[0001] Unable to find blkio cgroup in mounts
WARN[0001] Unable to find cpuset cgroup in mounts
WARN[0001] mountpoint for pids not found
INFO[0001] Loading containers: start.
WARN[0001] Running modprobe nf_nat failed with message: `modprobe: 
WARNING: Module nf_nat not found in directory 
/lib/modules/4.9.81-dey+g2c6ae4c`, error: exit status 1
WARN[0001] Running modprobe xt_conntrack failed with message: `modprobe: 
WARNING: Module xt_conntrack not found in directory 
/lib/modules/4.9.81-dey+g2c6ae4c`, error: exit status 1
Error starting daemon: Error initializing network controller: error 
obtaining controller instance: failed to create NAT chain: iptables 
failed: iptables --wait -t nat -N DOCKER: iptables v1.6.1: can't 
initialize iptables table `nat': Table does not exist (do you need to 
insmod?)
Perhaps iptables or your kernel needs to be upgraded.
  (exit status 3)

Our configuration is as suggested here: 
https://wiki.yoctoproject.org/wiki/TipsAndTricks/DockerOnImage, except 
that I don't include the system systemd stuff  (it lets my build fail) 
and connman (using NetworkManager).
Furthermore, I added the following lines to the kernel bbappend file:

# remove old defconfig
SRC_URI_remove = " defconfig"
# replace with new defconfig
SRC_URI_append = " file://defconfig"

KERNEL_FEATURES_append = " features/cgroups/cgroups.scc "

I also added a lot of configurations manually to the defconfig (mostly 
via menuconfig) to enable NAT:

CONFIG_CGROUP_DEVICE=y
CONFIG_IP_MULTICAST=y
CONFIG_IP_ADVANCED_ROUTER=y
CONFIG_NETFILTER=y
CONFIG_NF_CONNTRACK=y
CONFIG_NF_TABLES=y
CONFIG_NF_NAT=y
CONFIG_NETFILTER_XT_MATCH_ADDRTYPE=y
CONFIG_NETFILTER_XT_MATCH_COMMENT=y
CONFIG_NETFILTER_XT_MATCH_HL=y
CONFIG_NETFILTER_XT_MATCH_IPRANGE=y
CONFIG_NETFILTER_XT_MATCH_LIMIT=y
CONFIG_NETFILTER_XT_MATCH_MULTIPORT=y
CONFIG_NETFILTER_XT_MATCH_RECENT=y
CONFIG_IP_VS=y
CONFIG_NF_TABLES_IPV4=y
CONFIG_IP_NF_IPTABLES=y
CONFIG_IP_NF_NAT=y
CONFIG_IP_NF_FILTER=y
CONFIG_IP_NF_MANGLE=y
CONFIG_IP6_NF_IPTABLES=y
CONFIG_IP6_NF_FILTER=y
CONFIG_IP6_NF_MANGLE=y
CONFIG_BTRFS_FS=y
CONFIG_OVERLAY_FS=y

Apart from that, I added virtualization and aufs as DISTRO_FEATURE in 
local.conf and also enabled it in menuconfig.

But I still keep getting the above mentioned iptables error when trying 
to start docker. All this hassle makes me suspicious, especially as I'm 
quite sure that I once had docker running already with an image on our 
target and it wasn't that hard. So maybe it's just a misconfiguration 
and I need to add something in local.conf or the kernel recipe? Is 
systemd necessary? Or am I missing some life-or-death kernel 
configuration? It would also be nice if I could avoid the cgroup 
re-mounting before starting docker.

Thanks for every answer!
All the Best,
Jakob

-- 
Jakob Hasse
Software Developement

E: jakob.hasse@smart-home-technology.ch
T: +41 44 552 02 66

Smart Home Technology GmbH
www.smart-home-technology.ch

^ permalink raw reply	[flat|nested] 9+ messages in thread