Initializing cgroup subsys cpuset Initializing cgroup subsys cpu Linux version 2.6.38-rc4 (root@localhost) (gcc version 4.4.5 (Debian 4.4.5-10) ) #2 SMP Tue Feb 8 19:46:16 CST 2011 Command line: BOOT_IMAGE=/boot/vmlinuz-2.6.38-rc4 root=/dev/sda1 ro BIOS-provided physical RAM map: BIOS-e820: 0000000000000000 - 000000000009fc00 (usable) BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved) BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved) BIOS-e820: 0000000000100000 - 0000000097fb0000 (usable) BIOS-e820: 0000000097fb0000 - 0000000097fc8000 (reserved) BIOS-e820: 0000000097fc8000 - 0000000097fe7fb8 (ACPI NVS) BIOS-e820: 0000000097fe7fb8 - 00000000a0000000 (reserved) BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved) BIOS-e820: 00000000fec00000 - 00000000fec02000 (reserved) BIOS-e820: 00000000ffbc0000 - 00000000ffcc0000 (reserved) BIOS-e820: 00000000fff00000 - 0000000100000000 (reserved) NX (Execute Disable) protection: active DMI 2.4 present. DMI: 30C2/HP Compaq 6515b (GL087PA#AB2), BIOS 68YTT Ver. F.05 04/26/2007 e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved) e820 remove range: 00000000000a0000 - 0000000000100000 (usable) No AGP bridge found last_pfn = 0x97fb0 max_arch_pfn = 0x400000000 MTRR default type: uncachable MTRR fixed ranges enabled: 00000-9FFFF write-back A0000-BFFFF uncachable C0000-C0FFF write-protect C1000-C3FFF write-back C4000-C4FFF write-protect C5000-C7FFF write-back C8000-C8FFF write-protect C9000-CBFFF write-back CC000-CCFFF write-protect CD000-CFFFF write-back D0000-EFFFF uncachable F0000-FFFFF write-protect MTRR variable ranges enabled: 0 base 0000000000 mask FF80000000 write-back 1 base 0080000000 mask FFF0000000 write-back 2 base 0090000000 mask FFF8000000 write-back 3 disabled 4 disabled 5 disabled 6 disabled 7 disabled x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106 initial memory mapped : 0 - 20000000 init_memory_mapping: 0000000000000000-0000000097fb0000 0000000000 - 0097e00000 page 2M 0097e00000 - 0097fb0000 page 4k kernel direct mapping tables up to 97fb0000 @ 1fffb000-20000000 ACPI: RSDP 00000000000fe0b0 00024 (v02 HP ) ACPI: XSDT 0000000097fc81bc 00064 (v01 HPQOEM SLIC-MPC 00000001 HP 00000001) ACPI: FACP 0000000097fc8084 000F4 (v04 HP 0944 00000003 HP 00000001) ACPI Error: 32/64X address mismatch in Pm2ControlBlock: 0x00008800/0x0000000000008100, using 32 (20110112/tbfadt-427) ACPI: DSDT 0000000097fc84a4 11437 (v01 HP SB400 00010000 MSFT 03000001) ACPI: FACS 0000000097fe7d80 00040 ACPI: SLIC 0000000097fc8220 00176 (v01 HPQOEM SLIC-MPC 00000001 HP 00000001) ACPI: EPTH 0000000097fc8398 00038 (v01 HP 0944 00000001 HP 00000001) ACPI: APIC 0000000097fc83d0 00062 (v01 HP 0944 00000001 HP 00000001) ACPI: MCFG 0000000097fc8434 0003C (v01 HP 0944 00000001 HP 00000001) ACPI: TCPA 0000000097fc8470 00032 (v02 HP 0944 00000001 HP 00000001) ACPI: SSDT 0000000097fd98db 00059 (v01 HP HPQNLP 00000001 MSFT 03000001) ACPI: SSDT 0000000097fd9934 00182 (v01 HP PSSTBLID 00000001 HP 00000001) ACPI: Local APIC address 0xfee00000 [ffffea0000000000-ffffea00021fffff] PMD -> [ffff880095000000-ffff8800971fffff] on node 0 Zone PFN ranges: DMA 0x00000010 -> 0x00001000 DMA32 0x00001000 -> 0x00100000 Normal empty Movable zone start PFN for each node early_node_map[2] active PFN ranges 0: 0x00000010 -> 0x0000009f 0: 0x00000100 -> 0x00097fb0 On node 0 totalpages: 622399 DMA zone: 56 pages used for memmap DMA zone: 2 pages reserved DMA zone: 3925 pages, LIFO batch:0 DMA32 zone: 8455 pages used for memmap DMA32 zone: 609961 pages, LIFO batch:31 SB600 revision 0x13 Ignoring ACPI timer override. If you got timer trouble try acpi_use_timer_override Detected use of extended apic ids on hypertransport bus ACPI: PM-Timer IO Port: 0x8008 ACPI: Local APIC address 0xfee00000 ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled) ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled) ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1]) ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0]) IOAPIC[0]: apic_id 2, version 33, address 0xfec00000, GSI 0-23 ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) ACPI: BIOS IRQ0 pin2 override ignored. ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level) ACPI: IRQ9 used by override. Using ACPI (MADT) for SMP configuration information SMP: Allowing 2 CPUs, 0 hotplug CPUs nr_irqs_gsi: 40 Allocating PCI resources starting at a0000000 (gap: a0000000:40000000) setup_percpu: NR_CPUS:2 nr_cpumask_bits:2 nr_cpu_ids:2 nr_node_ids:1 PERCPU: Embedded 25 pages/cpu @ffff880097c00000 s72256 r8192 d21952 u1048576 pcpu-alloc: s72256 r8192 d21952 u1048576 alloc=1*2097152 pcpu-alloc: [0] 0 1 Built 1 zonelists in Zone order, mobility grouping on. Total pages: 613886 Kernel command line: BOOT_IMAGE=/boot/vmlinuz-2.6.38-rc4 root=/dev/sda1 ro PID hash table entries: 4096 (order: 3, 32768 bytes) Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes) Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes) Checking aperture... No AGP bridge found Node 0: aperture @ 32e000000 size 32 MB Aperture beyond 4GB. Ignoring. Memory: 2443596k/2490048k available (2634k kernel code, 452k absent, 46000k reserved, 1200k data, 368k init) SLUB: Genslabs=15, HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1 Hierarchical RCU implementation. RCU-based detection of stalled CPUs is disabled. NR_IRQS:4352 nr_irqs:512 16 Extended CMOS year: 2000 spurious 8259A interrupt: IRQ7. Console: colour VGA+ 80x25 console [tty0] enabled allocated 24903680 bytes of page_cgroup please try 'cgroup_disable=memory' option if you don't want memory cgroups Fast TSC calibration using PIT Detected 1593.548 MHz processor. Marking TSC unstable due to TSCs unsynchronized Calibrating delay loop (skipped), value calculated using timer frequency.. 3187.09 BogoMIPS (lpj=1593548) pid_max: default: 32768 minimum: 301 Mount-cache hash table entries: 256 Initializing cgroup subsys ns ns_cgroup deprecated: consider using the 'clone_children' flag without the ns_cgroup. Initializing cgroup subsys cpuacct Initializing cgroup subsys memory Initializing cgroup subsys devices Initializing cgroup subsys freezer Initializing cgroup subsys blkio tseg: 0000000000 CPU: Physical Processor ID: 0 CPU: Processor Core ID: 0 mce: CPU supports 5 MCE banks using C1E aware idle routine ACPI: Core revision 20110112 Setting APIC routing to flat ..TIMER: vector=0x30 apic1=0 pin1=0 apic2=-1 pin2=-1 CPU0: AMD Turion(tm) 64 X2 Mobile Technology TL-52 stepping 02 Performance Events: AMD PMU driver. ... version: 0 ... bit width: 48 ... generic registers: 4 ... value mask: 0000ffffffffffff ... max period: 00007fffffffffff ... fixed-purpose events: 0 ... event mask: 000000000000000f MCE: In-kernel MCE decoding enabled. Booting Node 0, Processors #1 Ok. System has AMD C1E enabled Switch to broadcast mode on CPU1 Brought up 2 CPUs Total of 2 processors activated (6378.45 BogoMIPS). Switch to broadcast mode on CPU0 devtmpfs: initialized NET: Registered protocol family 16 node 0 link 0: io port [1000, fffff] TOM: 00000000a0000000 aka 2560M node 0 link 0: mmio [e0000000, efffffff] node 0 link 0: mmio [f0000000, ffffffff] node 0 link 0: mmio [c8000000, dfffffff] node 0 link 0: mmio [c0000000, c7ffffff] node 0 link 0: mmio [a0000, bffff] node 0 link 0: mmio [a0000000, bfffffff] bus: [00, ff] on node 0 link 0 bus: 00 index 0 [io 0x0000-0xffff] bus: 00 index 1 [mem 0xa0000000-0xfcffffffff] bus: 00 index 2 [mem 0x000a0000-0x000bffff] ACPI: bus type pci registered PCI: Using configuration type 1 for base access bio: create slab at 0 ACPI: EC: Look up EC in DSDT ACPI: Interpreter enabled ACPI: (supports S0 S5) ACPI: Using IOAPIC for interrupt routing ACPI: Power Resource [C171] (off) ACPI: Power Resource [C24C] (on) ACPI: Power Resource [C395] (off) ACPI: Power Resource [C396] (off) ACPI: Power Resource [C397] (off) ACPI: Power Resource [C398] (off) ACPI: EC: GPE = 0x11, I/O: command/status = 0x66, data = 0x62 PCI: Ignoring host bridge windows from ACPI; if necessary, use "pci=use_crs" and report a bug ACPI: PCI Root Bridge [C08B] (domain 0000 [bus 00-ff]) pci_root PNP0A03:00: host bridge window [io 0x0000-0x0cf7] (ignored) pci_root PNP0A03:00: host bridge window [io 0x0d00-0xffff] (ignored) pci_root PNP0A03:00: host bridge window [mem 0x000a0000-0x000bffff] (ignored) pci_root PNP0A03:00: host bridge window [mem 0xa0000000-0xfedfffff] (ignored) pci_root PNP0A03:00: host bridge window [mem 0xfee01000-0xffffffff] (ignored) pci_root PNP0A03:00: host bridge window [mem 0x000d0000-0x000dffff] (ignored) pci 0000:00:00.0: [1002:7910] type 0 class 0x000600 pci 0000:00:01.0: [1002:7912] type 1 class 0x000604 pci 0000:00:05.0: [1002:7915] type 1 class 0x000604 pci 0000:00:05.0: PME# supported from D0 D3hot D3cold pci 0000:00:05.0: PME# disabled pci 0000:00:12.0: [1002:4380] type 0 class 0x000101 pci 0000:00:12.0: reg 10: [io 0x9000-0x9007] pci 0000:00:12.0: reg 14: [io 0x9008-0x900b] pci 0000:00:12.0: reg 18: [io 0x9010-0x9017] pci 0000:00:12.0: reg 1c: [io 0x5018-0x501b] pci 0000:00:12.0: reg 20: [io 0x5020-0x502f] pci 0000:00:12.0: reg 24: [mem 0xcc309000-0xcc3093ff] pci 0000:00:12.0: set SATA to AHCI mode pci 0000:00:13.0: [1002:4387] type 0 class 0x000c03 pci 0000:00:13.0: reg 10: [mem 0xcc301000-0xcc301fff] pci 0000:00:13.1: [1002:4388] type 0 class 0x000c03 pci 0000:00:13.1: reg 10: [mem 0xcc302000-0xcc302fff] pci 0000:00:13.2: [1002:4389] type 0 class 0x000c03 pci 0000:00:13.2: reg 10: [mem 0xcc303000-0xcc303fff] pci 0000:00:13.3: [1002:438a] type 0 class 0x000c03 pci 0000:00:13.3: reg 10: [mem 0xcc304000-0xcc304fff] pci 0000:00:13.4: [1002:438b] type 0 class 0x000c03 pci 0000:00:13.4: reg 10: [mem 0xcc305000-0xcc305fff] pci 0000:00:13.5: [1002:4386] type 0 class 0x000c03 pci 0000:00:13.5: reg 10: [mem 0xcc306000-0xcc3060ff] pci 0000:00:13.5: supports D1 D2 pci 0000:00:13.5: PME# supported from D0 D1 D2 D3hot pci 0000:00:13.5: PME# disabled pci 0000:00:14.0: [1002:4385] type 0 class 0x000c05 pci 0000:00:14.0: reg 10: [io 0x8200-0x820f] pci 0000:00:14.1: [1002:438c] type 0 class 0x000101 pci 0000:00:14.1: reg 10: [io 0x0000-0x0007] pci 0000:00:14.1: reg 14: [io 0x0000-0x0003] pci 0000:00:14.1: reg 18: [io 0x0000-0x0007] pci 0000:00:14.1: reg 1c: [io 0x0000-0x0003] pci 0000:00:14.1: reg 20: [io 0x5040-0x504f] pci 0000:00:14.2: [1002:4383] type 0 class 0x000403 pci 0000:00:14.2: reg 10: [mem 0xcc308000-0xcc30bfff 64bit] pci 0000:00:14.2: PME# supported from D0 D3hot D3cold pci 0000:00:14.2: PME# disabled pci 0000:00:14.3: [1002:438d] type 0 class 0x000601 pci 0000:00:14.4: [1002:4384] type 1 class 0x000604 pci 0000:00:18.0: [1022:1100] type 0 class 0x000600 pci 0000:00:18.1: [1022:1101] type 0 class 0x000600 pci 0000:00:18.2: [1022:1102] type 0 class 0x000600 pci 0000:00:18.3: [1022:1103] type 0 class 0x000600 PCI: peer root bus 00 res updated from pci conf pci 0000:01:05.0: [1002:791f] type 0 class 0x000300 pci 0000:01:05.0: reg 10: [mem 0xc0000000-0xc7ffffff 64bit pref] pci 0000:01:05.0: reg 18: [mem 0xcc100000-0xcc10ffff 64bit] pci 0000:01:05.0: reg 20: [io 0x4000-0x40ff] pci 0000:01:05.0: reg 24: [mem 0xcc200000-0xcc2fffff] pci 0000:01:05.0: supports D1 D2 pci 0000:00:01.0: PCI bridge to [bus 01-01] pci 0000:00:01.0: bridge window [io 0x4000-0x4fff] pci 0000:00:01.0: bridge window [mem 0xcc100000-0xcc2fffff] pci 0000:00:01.0: bridge window [mem 0xc0000000-0xc7ffffff 64bit pref] pci 0000:00:05.0: PCI bridge to [bus 20-20] pci 0000:00:05.0: bridge window [io 0x2000-0x3fff] pci 0000:00:05.0: bridge window [mem 0xc8000000-0xcbffffff] pci 0000:00:05.0: bridge window [mem 0xfff00000-0x000fffff pref] (disabled) pci 0000:02:04.0: [1180:0476] type 2 class 0x000607 pci 0000:02:04.0: reg 10: [mem 0xcc000000-0xcc000fff] pci 0000:02:04.0: supports D1 D2 pci 0000:02:04.0: PME# supported from D0 D1 D2 D3hot D3cold pci 0000:02:04.0: PME# disabled pci 0000:00:14.4: PCI bridge to [bus 02-03] (subtractive decode) pci 0000:00:14.4: bridge window [io 0xf000-0x0000] (disabled) pci 0000:00:14.4: bridge window [mem 0xcc000000-0xcc0fffff] pci 0000:00:14.4: bridge window [mem 0xfff00000-0x000fffff pref] (disabled) pci 0000:00:14.4: bridge window [io 0x0000-0xffff] (subtractive decode) pci 0000:00:14.4: bridge window [mem 0xa0000000-0xfcffffffff] (subtractive decode) pci 0000:00:14.4: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode) pci_bus 0000:03: [bus 03-06] partially hidden behind transparent bridge 0000:02 [bus 02-03] pci_bus 0000:00: on NUMA node 0 ACPI: PCI Interrupt Routing Table [\_SB_.C08B._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.C08B.C08C._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.C08B.C0FC._PRT] ACPI: PCI Interrupt Link [C145] (IRQs 10 11) *0, disabled. ACPI: PCI Interrupt Link [C146] (IRQs 10 11) *0, disabled. ACPI: PCI Interrupt Link [C147] (IRQs 10 11) *0, disabled. ACPI: PCI Interrupt Link [C148] (IRQs 10 11) *0, disabled. ACPI: PCI Interrupt Link [C149] (IRQs 10 11) *0, disabled. ACPI: PCI Interrupt Link [C14A] (IRQs 9) *0, disabled. ACPI: PCI Interrupt Link [C14B] (IRQs 10 11) *0, disabled. ACPI: PCI Interrupt Link [C14C] (IRQs 10 11) *0, disabled. vgaarb: device added: PCI:0000:01:05.0,decodes=io+mem,owns=io+mem,locks=none vgaarb: loaded SCSI subsystem initialized libata version 3.00 loaded. usbcore: registered new interface driver usbfs usbcore: registered new interface driver hub usbcore: registered new device driver usb PCI: Using ACPI for IRQ routing PCI: pci_cache_line_size set to 64 bytes pci 0000:00:14.2: address space collision: [mem 0xcc308000-0xcc30bfff 64bit] conflicts with 0000:00:12.0 [mem 0xcc309000-0xcc3093ff] reserve RAM buffer: 000000000009fc00 - 000000000009ffff reserve RAM buffer: 0000000097fb0000 - 0000000097ffffff pnp: PnP ACPI init ACPI: bus type pnp registered pnp 00:00: [mem 0x00000000-0x0009ffff] pnp 00:00: [mem 0x000e0000-0x000fffff] pnp 00:00: [mem 0x00100000-0xffffffff] system 00:00: [mem 0x00000000-0x0009ffff] could not be reserved system 00:00: [mem 0x000e0000-0x000fffff] could not be reserved system 00:00: [mem 0x00100000-0xffffffff] could not be reserved system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active) pnp 00:01: [bus 00-ff] pnp 00:01: [io 0x0cf8-0x0cff] pnp 00:01: [io 0x0000-0x0cf7 window] pnp 00:01: [io 0x0d00-0xffff window] pnp 00:01: [mem 0x000a0000-0x000bffff window] pnp 00:01: [mem 0xa0000000-0xfedfffff window] pnp 00:01: [mem 0xfee01000-0xffffffff window] pnp 00:01: [mem 0x000d0000-0x000dffff window] pnp 00:01: Plug and Play ACPI device, IDs PNP0a03 (active) pnp 00:02: [io 0x00f0-0x00ff] pnp 00:02: [irq 13] pnp 00:02: Plug and Play ACPI device, IDs PNP0c04 (active) pnp 00:03: [io 0x0000-0x000f] pnp 00:03: [io 0x0080-0x008f] pnp 00:03: [io 0x00c0-0x00df] pnp 00:03: [dma 4] pnp 00:03: Plug and Play ACPI device, IDs PNP0200 (active) pnp 00:04: [io 0x0061] pnp 00:04: Plug and Play ACPI device, IDs PNP0800 (active) pnp 00:05: [io 0x0070-0x0071] pnp 00:05: [io 0x0072-0x0073] pnp 00:05: [irq 8] pnp 00:05: Plug and Play ACPI device, IDs PNP0b00 (active) pnp 00:06: [io 0x0060] pnp 00:06: [io 0x0064] pnp 00:06: [irq 1] pnp 00:06: Plug and Play ACPI device, IDs PNP0303 (active) pnp 00:07: [irq 12] pnp 00:07: Plug and Play ACPI device, IDs SYN0131 SYN0100 SYN0002 PNP0f13 (active) pnp 00:08: [io 0x0010-0x001f] pnp 00:08: [io 0x0022-0x0023] pnp 00:08: [io 0x002e-0x002f] pnp 00:08: [io 0x004e-0x004f] pnp 00:08: [io 0x0092] pnp 00:08: [io 0x00b0-0x00b1] pnp 00:08: [io 0x040b] pnp 00:08: [io 0x04d0-0x04d1] pnp 00:08: [io 0x04d6] pnp 00:08: [io 0x0500-0x053f] pnp 00:08: [io 0x0c00-0x0c01] pnp 00:08: [io 0x0c14] pnp 00:08: [io 0x0c50-0x0c51] pnp 00:08: [io 0x0c52] pnp 00:08: [io 0x0c6c] pnp 00:08: [io 0x0c6f] pnp 00:08: [io 0x0cd0-0x0cdf] pnp 00:08: [mem 0xffb00000-0xffbfffff] pnp 00:08: [mem 0xfff00000-0xffffffff] system 00:08: [io 0x040b] has been reserved system 00:08: [io 0x04d0-0x04d1] has been reserved system 00:08: [io 0x04d6] has been reserved system 00:08: [io 0x0500-0x053f] has been reserved system 00:08: [io 0x0c00-0x0c01] has been reserved system 00:08: [io 0x0c14] has been reserved system 00:08: [io 0x0c50-0x0c51] has been reserved system 00:08: [io 0x0c52] has been reserved system 00:08: [io 0x0c6c] has been reserved system 00:08: [io 0x0c6f] has been reserved system 00:08: [io 0x0cd0-0x0cdf] has been reserved system 00:08: [mem 0xffb00000-0xffbfffff] could not be reserved system 00:08: [mem 0xfff00000-0xffffffff] has been reserved system 00:08: Plug and Play ACPI device, IDs PNP0c02 (active) pnp 00:09: [irq 22] pnp 00:09: Plug and Play ACPI device, IDs HPQ0004 (active) pnp 00:0a: [io 0x8000-0x802f] pnp 00:0a: [io 0x8100-0x811f] pnp 00:0a: [mem 0xe0000000-0xefffffff] pnp 00:0a: [mem 0xfec00000-0xfec000ff] pnp 00:0a: [mem 0xfed45000-0xfed8ffff] system 00:0a: [io 0x8000-0x802f] has been reserved system 00:0a: [io 0x8100-0x811f] has been reserved system 00:0a: [mem 0xe0000000-0xefffffff] has been reserved system 00:0a: [mem 0xfec00000-0xfec000ff] could not be reserved system 00:0a: [mem 0xfed45000-0xfed8ffff] has been reserved system 00:0a: Plug and Play ACPI device, IDs PNP0c02 (active) pnp 00:0b: [mem 0x000cd400-0x000cffff] pnp 00:0b: [mem 0x00000000-0x07ffffff] pnp 00:0b: [mem 0xfee00000-0xfee00fff] system 00:0b: [mem 0x000cd400-0x000cffff] has been reserved system 00:0b: [mem 0x00000000-0x07ffffff] could not be reserved system 00:0b: [mem 0xfee00000-0xfee00fff] has been reserved system 00:0b: Plug and Play ACPI device, IDs PNP0c02 (active) pnp: PnP ACPI: found 12 devices ACPI: ACPI bus type pnp unregistered Switching to clocksource acpi_pm pci 0000:00:14.4: BAR 9: assigned [mem 0xa0000000-0xa3ffffff pref] pci 0000:00:14.2: BAR 0: assigned [mem 0xa4000000-0xa4003fff 64bit] pci 0000:00:14.2: BAR 0: set to [mem 0xa4000000-0xa4003fff 64bit] (PCI address [0xa4000000-0xa4003fff]) pci 0000:00:14.4: BAR 7: assigned [io 0x1000-0x1fff] pci 0000:00:01.0: PCI bridge to [bus 01-01] pci 0000:00:01.0: bridge window [io 0x4000-0x4fff] pci 0000:00:01.0: bridge window [mem 0xcc100000-0xcc2fffff] pci 0000:00:01.0: bridge window [mem 0xc0000000-0xc7ffffff 64bit pref] pci 0000:00:05.0: PCI bridge to [bus 20-20] pci 0000:00:05.0: bridge window [io 0x2000-0x3fff] pci 0000:00:05.0: bridge window [mem 0xc8000000-0xcbffffff] pci 0000:00:05.0: bridge window [mem pref disabled] pci 0000:02:04.0: BAR 9: assigned [mem 0xa0000000-0xa3ffffff pref] pci 0000:02:04.0: BAR 10: assigned [mem 0xa8000000-0xabffffff] pci 0000:02:04.0: BAR 7: assigned [io 0x1000-0x10ff] pci 0000:02:04.0: BAR 8: assigned [io 0x1400-0x14ff] pci 0000:02:04.0: CardBus bridge to [bus 03-06] pci 0000:02:04.0: bridge window [io 0x1000-0x10ff] pci 0000:02:04.0: bridge window [io 0x1400-0x14ff] pci 0000:02:04.0: bridge window [mem 0xa0000000-0xa3ffffff pref] pci 0000:02:04.0: bridge window [mem 0xa8000000-0xabffffff] pci 0000:00:14.4: PCI bridge to [bus 02-03] pci 0000:00:14.4: bridge window [io 0x1000-0x1fff] pci 0000:00:14.4: bridge window [mem 0xcc000000-0xcc0fffff] pci 0000:00:14.4: bridge window [mem 0xa0000000-0xa3ffffff pref] pci 0000:00:05.0: setting latency timer to 64 pci 0000:02:04.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20 pci_bus 0000:00: resource 4 [io 0x0000-0xffff] pci_bus 0000:00: resource 5 [mem 0xa0000000-0xfcffffffff] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff] pci_bus 0000:01: resource 0 [io 0x4000-0x4fff] pci_bus 0000:01: resource 1 [mem 0xcc100000-0xcc2fffff] pci_bus 0000:01: resource 2 [mem 0xc0000000-0xc7ffffff 64bit pref] pci_bus 0000:20: resource 0 [io 0x2000-0x3fff] pci_bus 0000:20: resource 1 [mem 0xc8000000-0xcbffffff] pci_bus 0000:02: resource 0 [io 0x1000-0x1fff] pci_bus 0000:02: resource 1 [mem 0xcc000000-0xcc0fffff] pci_bus 0000:02: resource 2 [mem 0xa0000000-0xa3ffffff pref] pci_bus 0000:02: resource 4 [io 0x0000-0xffff] pci_bus 0000:02: resource 5 [mem 0xa0000000-0xfcffffffff] pci_bus 0000:02: resource 6 [mem 0x000a0000-0x000bffff] pci_bus 0000:03: resource 0 [io 0x1000-0x10ff] pci_bus 0000:03: resource 1 [io 0x1400-0x14ff] pci_bus 0000:03: resource 2 [mem 0xa0000000-0xa3ffffff pref] pci_bus 0000:03: resource 3 [mem 0xa8000000-0xabffffff] NET: Registered protocol family 2 IP route cache hash table entries: 131072 (order: 8, 1048576 bytes) TCP established hash table entries: 262144 (order: 10, 4194304 bytes) TCP bind hash table entries: 65536 (order: 8, 1048576 bytes) TCP: Hash tables configured (established 262144 bind 65536) TCP reno registered UDP hash table entries: 2048 (order: 4, 65536 bytes) UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes) NET: Registered protocol family 1 pci 0000:01:05.0: Boot video device PCI: CLS 64 bytes, default 64 msgmni has been set to 4772 Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253) io scheduler noop registered io scheduler deadline registered io scheduler cfq registered (default) ACPI: AC Adapter [C1EB] (on-line) input: Sleep Button as /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input0 ACPI: Sleep Button [C28D] input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input1 ACPI: Lid Switch [C265] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2 ACPI: Power Button [PWRF] ACPI: Fan [C399] (off) ACPI: Fan [C39A] (off) ACPI: Fan [C39B] (off) ACPI: Fan [C39C] (off) ACPI: acpi_idle registered with cpuidle ACPI: processor limited to max C-state 1 thermal LNXTHERM:00: registered as thermal_zone0 ACPI: Thermal Zone [TZ1] (44 C) ACPI: Battery Slot [C1ED] (battery absent) ACPI: Battery Slot [C1EC] (battery absent) ahci 0000:00:12.0: version 3.0 ahci 0000:00:12.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 ahci 0000:00:12.0: controller can't do 64bit DMA, forcing 32bit ahci 0000:00:12.0: AHCI 0001.0100 32 slots 4 ports 3 Gbps 0x1 impl SATA mode ahci 0000:00:12.0: flags: ncq sntf ilck pm led clo pio slum part ccc scsi0 : ahci scsi1 : ahci scsi2 : ahci scsi3 : ahci ata1: SATA max UDMA/133 abar m1024@0xcc309000 port 0xcc309100 irq 16 ata2: DUMMY ata3: DUMMY ata4: DUMMY pata_atiixp 0000:00:14.1: PCI INT A -> GSI 16 (level, low) -> IRQ 16 scsi4 : pata_atiixp scsi5 : pata_atiixp ata5: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0x5040 irq 14 ata6: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0x5048 irq 15 ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver ehci_hcd 0000:00:13.5: PCI INT D -> GSI 23 (level, low) -> IRQ 23 ehci_hcd 0000:00:13.5: EHCI Host Controller ehci_hcd 0000:00:13.5: new USB bus registered, assigned bus number 1 ehci_hcd 0000:00:13.5: applying AMD SB600/SB700 USB freeze workaround ehci_hcd 0000:00:13.5: debug port 1 ehci_hcd 0000:00:13.5: irq 23, io mem 0xcc306000 ehci_hcd 0000:00:13.5: USB 2.0 started, EHCI 1.00 hub 1-0:1.0: USB hub found hub 1-0:1.0: 10 ports detected ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver ohci_hcd 0000:00:13.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23 ohci_hcd 0000:00:13.0: OHCI Host Controller ohci_hcd 0000:00:13.0: new USB bus registered, assigned bus number 2 ohci_hcd 0000:00:13.0: irq 23, io mem 0xcc301000 hub 2-0:1.0: USB hub found hub 2-0:1.0: 2 ports detected ohci_hcd 0000:00:13.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17 ohci_hcd 0000:00:13.1: OHCI Host Controller ohci_hcd 0000:00:13.1: new USB bus registered, assigned bus number 3 ohci_hcd 0000:00:13.1: irq 17, io mem 0xcc302000 hub 3-0:1.0: USB hub found hub 3-0:1.0: 2 ports detected ohci_hcd 0000:00:13.2: PCI INT C -> GSI 17 (level, low) -> IRQ 17 ohci_hcd 0000:00:13.2: OHCI Host Controller ohci_hcd 0000:00:13.2: new USB bus registered, assigned bus number 4 ohci_hcd 0000:00:13.2: irq 17, io mem 0xcc303000 ata5.00: ATAPI: TSSTcorpCDW/DVD TS-L462D, HH08, max MWDMA2 hub 4-0:1.0: USB hub found hub 4-0:1.0: 2 ports detected ohci_hcd 0000:00:13.3: PCI INT B -> GSI 17 (level, low) -> IRQ 17 ohci_hcd 0000:00:13.3: OHCI Host Controller ohci_hcd 0000:00:13.3: new USB bus registered, assigned bus number 5 ohci_hcd 0000:00:13.3: irq 17, io mem 0xcc304000 hub 5-0:1.0: USB hub found hub 5-0:1.0: 2 ports detected ohci_hcd 0000:00:13.4: PCI INT C -> GSI 17 (level, low) -> IRQ 17 ohci_hcd 0000:00:13.4: OHCI Host Controller ohci_hcd 0000:00:13.4: new USB bus registered, assigned bus number 6 ohci_hcd 0000:00:13.4: irq 17, io mem 0xcc305000 ata5.00: configured for MWDMA2 hub 6-0:1.0: USB hub found hub 6-0:1.0: 2 ports detected i8042: PNP: PS/2 Controller [PNP0303:C249,PNP0f13:C24A] at 0x60,0x64 irq 1,12 i8042: Detected active multiplexing controller, rev 1.1 serio: i8042 KBD port at 0x60,0x64 irq 1 serio: i8042 AUX0 port at 0x60,0x64 irq 12 serio: i8042 AUX1 port at 0x60,0x64 irq 12 serio: i8042 AUX2 port at 0x60,0x64 irq 12 serio: i8042 AUX3 port at 0x60,0x64 irq 12 mousedev: PS/2 mouse device common for all mice rtc_cmos 00:05: RTC can wake from S4 rtc_cmos 00:05: rtc core: registered rtc_cmos as rtc0 rtc0: alarms up to one month, y3k, 114 bytes nvram EDAC MC: Ver: 2.1.0 Feb 8 2011 EDAC amd64_edac: v3.3.0 EDAC amd64: DRAM ECC disabled. EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load. Either enable ECC checking or force module loading by setting 'ecc_enable_override'. (Note that use of the override may cause unknown side effects.) cpuidle: using governor ladder Netfilter messages via NETLINK v0.30. nf_conntrack version 0.5.0 (16384 buckets, 65536 max) TCP cubic registered Initializing XFRM netlink socket NET: Registered protocol family 17 NET: Registered protocol family 15 rtc_cmos 00:05: setting system clock to 2011-02-10 12:46:26 UTC (1297341986) ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300) ata1.00: ATA-7: FUJITSU MHW2120BH, 8918, max UDMA/100 ata1.00: 234441648 sectors, multi 16: LBA48 ata1.00: SB600 AHCI: limiting to 255 sectors per cmd ata1.00: SB600 AHCI: limiting to 255 sectors per cmd ata1.00: configured for UDMA/100 scsi 0:0:0:0: Direct-Access ATA FUJITSU MHW2120B 8918 PQ: 0 ANSI: 5 sd 0:0:0:0: [sda] 234441648 512-byte logical blocks: (120 GB/111 GiB) sd 0:0:0:0: [sda] Write Protect is off sd 0:0:0:0: Attached scsi generic sg0 type 0 sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input3 scsi 4:0:0:0: CD-ROM TSSTcorp CDW/DVD TS-L462D HH08 PQ: 0 ANSI: 5 sda: sda1 sda2 < sda5 sda6 > sd 0:0:0:0: [sda] Attached SCSI disk sr0: scsi3-mmc drive: 24x/24x writer cd/rw xa/form2 cdda tray cdrom: Uniform CD-ROM driver Revision: 3.20 sr 4:0:0:0: Attached scsi CD-ROM sr0 sr 4:0:0:0: Attached scsi generic sg1 type 5 EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null) VFS: Mounted root (ext2 filesystem) readonly on device 8:1. devtmpfs: mounted Freeing unused kernel memory: 368k freed usb 6-2: new low speed USB device using ohci_hcd and address 2 udev[713]: starting version 164 input: GASIA Dell USB Keyboard as /devices/pci0000:00/0000:00:13.4/usb6/6-2/6-2:1.0/input/input4 generic-usb 0003:0E8F:3072.0001: input: USB HID v1.10 Keyboard [GASIA Dell USB Keyboard] on usb-0000:00:13.4-2/input0 input: GASIA Dell USB Keyboard as /devices/pci0000:00/0000:00:13.4/usb6/6-2/6-2:1.1/input/input5 generic-usb 0003:0E8F:3072.0002: input: USB HID v1.10 Device [GASIA Dell USB Keyboard] on usb-0000:00:13.4-2/input1 usbcore: registered new interface driver usbhid usbhid: USB HID core driver HDA Intel 0000:00:14.2: power state changed by ACPI to D0 HDA Intel 0000:00:14.2: power state changed by ACPI to D0 HDA Intel 0000:00:14.2: PCI INT A -> GSI 16 (level, low) -> IRQ 16 Synaptics Touchpad, model: 1, fw: 6.2, id: 0x2580b1, caps: 0xa04793/0x300000/0x0 serio: Synaptics pass-through port at isa0060/serio4/input0 input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio4/input/input6 EXT4-fs (sda1): re-mounted. Opts: (null) EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro EXT4-fs (sda5): mounted filesystem with ordered data mode. Opts: (null)