All of lore.kernel.org
 help / color / mirror / Atom feed
From: Wesley Cheng <wcheng@codeaurora.org>
To: Felipe Balbi <balbi@kernel.org>, Alan Stern <stern@rowland.harvard.edu>
Cc: gregkh@linuxfoundation.org, linux-usb@vger.kernel.org,
	linux-kernel@vger.kernel.org, jackp@codeaurora.org
Subject: Re: [PATCH] usb: dwc3: gadget: Use list_replace_init() before traversing lists
Date: Thu, 29 Jul 2021 01:45:45 -0700	[thread overview]
Message-ID: <4e06452a-080f-a2be-ab88-9ac992740ee0@codeaurora.org> (raw)
In-Reply-To: <87zgu5v8om.fsf@kernel.org>

Hi Felipe,

On 7/29/2021 1:09 AM, Felipe Balbi wrote:
> 
> Hi,
> 
> Wesley Cheng <wcheng@codeaurora.org> writes:
> 
>> The list_for_each_entry_safe() macro saves the current item (n) and
>> the item after (n+1), so that n can be safely removed without
>> corrupting the list.  However, when traversing the list and removing
>> items using gadget giveback, the DWC3 lock is briefly released,
>> allowing other routines to execute.  There is a situation where, while
>> items are being removed from the cancelled_list using
>> dwc3_gadget_ep_cleanup_cancelled_requests(), the pullup disable
>> routine is running in parallel (due to UDC unbind).  As the cleanup
>> routine removes n, and the pullup disable removes n+1, once the
>> cleanup retakes the DWC3 lock, it references a request who was already
>> removed/handled.  With list debug enabled, this leads to a panic.
>> Ensure all instances of the macro are replaced where gadget giveback
>> is used.
>>
>> Example call stack:
>>
>> Thread#1:
>> __dwc3_gadget_ep_set_halt() - CLEAR HALT
>>   -> dwc3_gadget_ep_cleanup_cancelled_requests()
>>     ->list_for_each_entry_safe()
>>     ->dwc3_gadget_giveback(n)
>>       ->dwc3_gadget_del_and_unmap_request()- n deleted[cancelled_list]
>>       ->spin_unlock
>>       ->Thread#2 executes
>>       ...
>>     ->dwc3_gadget_giveback(n+1)
>>       ->Already removed!
>>
>> Thread#2:
>> dwc3_gadget_pullup()
>>   ->waiting for dwc3 spin_lock
>>   ...
>>   ->Thread#1 released lock
>>   ->dwc3_stop_active_transfers()
>>     ->dwc3_remove_requests()
>>       ->fetches n+1 item from cancelled_list (n removed by Thread#1)
>>       ->dwc3_gadget_giveback()
>>         ->dwc3_gadget_del_and_unmap_request()- n+1
>> deleted[cancelled_list]
>>         ->spin_unlock
>>
>> Fix this condition by utilizing list_replace_init(), and traversing
>> through a local copy of the current elements in the endpoint lists.
>> This will also set the parent list as empty, so if another thread is
>> also looping through the list, it will be empty on the next iteration.
>>
>> Fixes: d4f1afe5e896 ("usb: dwc3: gadget: move requests to cancelled_list")
>> Signed-off-by: Wesley Cheng <wcheng@codeaurora.org>
>>
>> ---
>> Previous patchset:
>> https://lore.kernel.org/linux-usb/1620716636-12422-1-git-send-email-wcheng@codeaurora.org/
>> ---
>>  drivers/usb/dwc3/gadget.c | 18 ++++++++++++++++--
>>  1 file changed, 16 insertions(+), 2 deletions(-)
>>
>> diff --git a/drivers/usb/dwc3/gadget.c b/drivers/usb/dwc3/gadget.c
>> index a29a4ca..3ce6ed9 100644
>> --- a/drivers/usb/dwc3/gadget.c
>> +++ b/drivers/usb/dwc3/gadget.c
>> @@ -1926,9 +1926,13 @@ static void dwc3_gadget_ep_cleanup_cancelled_requests(struct dwc3_ep *dep)
>>  {
>>  	struct dwc3_request		*req;
>>  	struct dwc3_request		*tmp;
>> +	struct list_head		local;
>>  	struct dwc3			*dwc = dep->dwc;
>>  
>> -	list_for_each_entry_safe(req, tmp, &dep->cancelled_list, list) {
>> +restart:
>> +	list_replace_init(&dep->cancelled_list, &local);
> 
> hmm, if the lock is held and IRQs disabled when this runs, then no other
> threads will be able to append requests to the list which makes the
> "restart" label unnecessary, no?

We do still call dwc3_gadget_giveback() which would release the lock
briefly, so if there was another thread waiting on dwc->lock, it would
be able to add additional items to that list.

> 
> I wonder if we should release the lock and reenable interrupts after
> replacing the head. The problem is that
> dwc3_gadget_ep_cleanup_cancelled_requests() can run from the IRQ
> handler.
> 

We would also need to consider that some of the APIs being called in
these situations would also have the assumption that the dwc->lock is
held, ie dwc3_gadget_giveback()

Thanks
Wesley Cheng

> Alan, could you provide your insight here? Do you think we should defer
> this to a low priority tasklet or something along those lines?
> 
>> +	list_for_each_entry_safe(req, tmp, &local, list) {
>>  		dwc3_gadget_ep_skip_trbs(dep, req);
>>  		switch (req->status) {
>>  		case DWC3_REQUEST_STATUS_DISCONNECTED:
> 
> 

-- 
The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum,
a Linux Foundation Collaborative Project

  reply	other threads:[~2021-07-29  8:47 UTC|newest]

Thread overview: 19+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2021-07-29  7:33 [PATCH] usb: dwc3: gadget: Use list_replace_init() before traversing lists Wesley Cheng
2021-07-29  8:09 ` Felipe Balbi
2021-07-29  8:45   ` Wesley Cheng [this message]
2021-07-29  9:31     ` Felipe Balbi
2021-07-29 14:20   ` Alan Stern
2021-08-09 21:04 ` John Stultz
2021-08-09 22:31   ` [RFC][PATCH] dwc3: gadget: Fix losing list items in dwc3_gadget_ep_cleanup_completed_requests() John Stultz
2021-08-09 22:44     ` Thinh Nguyen
2021-08-09 22:53       ` John Stultz
2021-08-09 22:57         ` Thinh Nguyen
2021-08-10  6:05           ` Greg Kroah-Hartman
2021-08-10  7:11             ` Greg Kroah-Hartman
2021-08-10 17:11           ` Wesley Cheng
2021-08-10 20:14             ` Thinh Nguyen
2021-08-10 20:17               ` Thinh Nguyen
2021-08-10 23:40                 ` Thinh Nguyen
2021-08-09 21:26 ` [PATCH] usb: dwc3: gadget: Use list_replace_init() before traversing lists John Stultz
2021-08-09 22:07 ` Thinh Nguyen
2021-08-10  3:12   ` Ray Chi

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=4e06452a-080f-a2be-ab88-9ac992740ee0@codeaurora.org \
    --to=wcheng@codeaurora.org \
    --cc=balbi@kernel.org \
    --cc=gregkh@linuxfoundation.org \
    --cc=jackp@codeaurora.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-usb@vger.kernel.org \
    --cc=stern@rowland.harvard.edu \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.