All of lore.kernel.org
 help / color / mirror / Atom feed
From: Thomas Monjalon <thomas@monjalon.net>
To: "Phil Yang (Arm Technology China)" <Phil.Yang@arm.com>
Cc: Bruce Richardson <bruce.richardson@intel.com>,
	"dev@dpdk.org" <dev@dpdk.org>,
	"david.marchand@redhat.com" <david.marchand@redhat.com>,
	"jerinj@marvell.com" <jerinj@marvell.com>,
	Honnappa Nagarahalli <Honnappa.Nagarahalli@arm.com>,
	"Gavin Hu (Arm Technology China)" <Gavin.Hu@arm.com>,
	"Joyce Kong (Arm Technology China)" <Joyce.Kong@arm.com>,
	nd <nd@arm.com>, "stable@dpdk.org" <stable@dpdk.org>
Subject: Re: [dpdk-dev] [PATCH 1/2] mk: fix unsupported flag error on armhf architercture
Date: Wed, 27 Nov 2019 11:32:54 +0100	[thread overview]
Message-ID: <5000317.ObS1QFYq1c@xps> (raw)
In-Reply-To: <VE1PR08MB4640677BB37E7328A4BC2498E9440@VE1PR08MB4640.eurprd08.prod.outlook.com>

27/11/2019 11:00, Phil Yang (Arm Technology China):
> > -----Original Message-----
> > From: Bruce Richardson <bruce.richardson@intel.com>
> > Sent: Wednesday, November 27, 2019 5:30 PM
> > To: Phil Yang (Arm Technology China) <Phil.Yang@arm.com>
> > Cc: thomas@monjalon.net; dev@dpdk.org; david.marchand@redhat.com;
> > jerinj@marvell.com; Honnappa Nagarahalli
> > <Honnappa.Nagarahalli@arm.com>; Gavin Hu (Arm Technology China)
> > <Gavin.Hu@arm.com>; Joyce Kong (Arm Technology China)
> > <Joyce.Kong@arm.com>; nd <nd@arm.com>; stable@dpdk.org
> > Subject: Re: [dpdk-dev] [PATCH 1/2] mk: fix unsupported flag error on armhf
> > architercture
> > 
> > On Wed, Nov 27, 2019 at 08:09:22AM +0000, Phil Yang (Arm Technology China)
> > wrote:
> > > > -----Original Message-----
> > > > From: Thomas Monjalon <thomas@monjalon.net>
> > > > Sent: Wednesday, November 27, 2019 1:02 AM
> > > > To: Phil Yang (Arm Technology China) <Phil.Yang@arm.com>
> > > > Cc: dev@dpdk.org; Bruce Richardson <bruce.richardson@intel.com>;
> > > > david.marchand@redhat.com; jerinj@marvell.com; Honnappa
> > Nagarahalli
> > > > <Honnappa.Nagarahalli@arm.com>; Gavin Hu (Arm Technology China)
> > > > <Gavin.Hu@arm.com>; Joyce Kong (Arm Technology China)
> > > > <Joyce.Kong@arm.com>; nd <nd@arm.com>; stable@dpdk.org
> > > > Subject: Re: [dpdk-dev] [PATCH 1/2] mk: fix unsupported flag error on
> > armhf
> > > > architercture
> > > >
> > > > 12/11/2019 07:40, Phil Yang (Arm Technology China):
> > > > > > -----Original Message-----
> > > > > > From: Thomas Monjalon <thomas@monjalon.net>
> > > > > > Sent: Tuesday, November 12, 2019 2:03 PM
> > > > > > To: Phil Yang (Arm Technology China) <Phil.Yang@arm.com>
> > > > > > Cc: Bruce Richardson <bruce.richardson@intel.com>; dev@dpdk.org;
> > > > > > david.marchand@redhat.com; jerinj@marvell.com; Honnappa
> > > > Nagarahalli
> > > > > > <Honnappa.Nagarahalli@arm.com>; Gavin Hu (Arm Technology China)
> > > > > > <Gavin.Hu@arm.com>; Joyce Kong (Arm Technology China)
> > > > > > <Joyce.Kong@arm.com>; nd <nd@arm.com>; stable@dpdk.org
> > > > > > Subject: Re: [dpdk-dev] [PATCH 1/2] mk: fix unsupported flag error
> > on
> > > > armhf
> > > > > > architercture
> > > > > >
> > > > > > 12/11/2019 06:25, Phil Yang (Arm Technology China):
> > > > > > > From: Bruce Richardson <bruce.richardson@intel.com>
> > > > > > > > On Mon, Nov 11, 2019 at 06:34:20PM +0800, Phil Yang wrote:
> > > > > > > > > The older version (e.g. version 7.4.0 ) of GNU C compiler for the
> > > > armhf
> > > > > > > > > architecture doesn't support the flag '-Wno-address-of-packed-
> > > > > > member',
> > > > > > > > > so remove this flag for aarch32.
> > > > > > > > >
> > > > > > > > > Fixes: a385972c3675 ("mk: disable warning for packed member
> > > > pointer")
> > > > > > > > > Cc: stable@dpdk.org
> > > > > > > > >
> > > > > > > > > Signed-off-by: Phil Yang <phil.yang@arm.com>
> > > > > > > > > Reviewed-by: Gavin Hu <gavin.hu@arm.com>
> > > > > > > > > Tested-by: Joyce Kong <joyce.kong@arm.com>
> > > > > > > > >
> > > > > > > > > ---
> > > > > > > > >  mk/toolchain/gcc/rte.vars.mk | 2 ++
> > > > > > > > >  1 file changed, 2 insertions(+)
> > > > > > > > >
> > > > > > > > > diff --git a/mk/toolchain/gcc/rte.vars.mk
> > > > > > b/mk/toolchain/gcc/rte.vars.mk
> > > > > > > > > index 9fc7041..ec0cbbf 100644
> > > > > > > > > --- a/mk/toolchain/gcc/rte.vars.mk
> > > > > > > > > +++ b/mk/toolchain/gcc/rte.vars.mk
> > > > > > > > > @@ -100,7 +100,9 @@ WERROR_FLAGS += -Wno-format-
> > truncation
> > > > > > > > >  endif
> > > > > > > > >
> > > > > > > > >  # disable packed member unalign warnings
> > > > > > > > > +ifneq ($(CONFIG_RTE_ARCH_ARM), y)
> > > > > > > > >  WERROR_FLAGS += -Wno-address-of-packed-member
> > > > > > > > > +endif
> > > > > > > > >
> > > > > > > > You don't need to do this, as gcc will not complain about this
> > unknown
> > > > > > flag
> > > > > > > > unless you have other issues in your code.[1] I think it's better to
> > > > keep
> > > > > > the
> > > > > > > > code clean in this case, otherwise we'll have the code littered with
> > > > > > > > conditionals for various flags.
> > > > > > > >
> > > > > > > > /Bruce
> > > > > > > >
> > > > > > > > [1] https://gcc.gnu.org/onlinedocs/gcc/Warning-Options.html
> > > > > > > > "When an unrecognized warning option is requested (e.g.,
> > > > > > > > -Wunknown-warning), GCC emits a diagnostic stating that the
> > option
> > > > is
> > > > > > not
> > > > > > > > recognized. However, if the -Wno- form is used, the behavior is
> > > > slightly
> > > > > > > > different: no diagnostic is produced for -Wno-unknown-warning
> > > > unless
> > > > > > other
> > > > > > > > diagnostics are being produced. This allows the use of new -Wno-
> > > > options
> > > > > > > > with old compilers, but if something goes wrong, the compiler
> > warns
> > > > that
> > > > > > an
> > > > > > > > unrecognized option is present."
> > > > > > >
> > > > > > > Thanks, Bruce.
> > > > > > >
> > > > > > > There are thousands of warnings with alignment when compiling for
> > > > > > ARMv7 (ARMv7 supports unaligned memory access).
> > > > > > > Without this new flag, the build system works fine for ARMv7.  So I
> > add
> > > > this
> > > > > > conditional for ARMv7 only.
> > > > > > > I agree with you we should clean up the code, but it needs a lot of
> > > > effort to
> > > > > > achieve that.
> > > > > > > This patch is going to make the ARMv7 target build successfully
> > during
> > > > this
> > > > > > period.
> > > > > >
> > > > > > I would go the opposite direction.
> > > > > > I think we should remove all warnings disablement like "-Wno-
> > > > something",
> > > > > > and clean the code.
> > > > >
> > > > > Thanks, Thomas.
> > > > >
> > > > > I think it is a compiler issue rather than a code defect in this case, as It
> > > > cannot recognize the '-Waddress-of-packed-member' flag.
> > > > > "arm-linux-gnueabihf-gcc: error: unrecognized command line option '-
> > > > Waddress-of-packed-member'"
> > > > >
> > > > > >
> > > > > > If you want to allow building ARMv7, you can just allow warnings as
> > not
> > > > > > errors.
> > > > > > So we will still see something is wrong but it won't prevent from
> > building.
> > > > >
> > > > > Yes. We did this already, all the alignment issues are emitted as
> > warnings
> > > > on ARMv7.
> > > > > Please see these two commits:
> > > > > 79fa5c2a9992 ("mk: ignore alignment errors for ARMv7")
> > > > > 6433c19105e8 ("mk: generalize strict alignment warning handling")
> > > >
> > > > I don't know what to do with this patch.
> > > > I think it is not how it should work,
> > > > but you say your compiler has a real bug.
> > > Agree with you, however I haven't found a better solution for this issue yet.
> > >
> > > >
> > > > Can you confirm which compiler is it?
> > >
> > > Please check the packet information dumped below, it is the latest version
> > in Ubuntu 18.04 LTS.
> > > $ sudo apt show gcc-arm-linux-gnueabihf
> > > Package: gcc-arm-linux-gnueabihf
> > > Version: 4:7.4.0-1ubuntu2.3
> > > Priority: optional
> > > Section: devel
> > > Source: gcc-defaults (1.176ubuntu2.3)
> > > Origin: Ubuntu
> > >
> > > > Does it prevent to compile even with -Wno-error ?
> > > Yes, it does. I put one piece of the compiling log bellow. Please take a look.
> > >
> > > $ make -j1 CROSS=arm-linux-gnueabihf- T=arm-armv7a-linuxapp-gcc
> > RTE_DEVEL_BUILD=y
> > 
> > RTE_DEVEL_BUILD turns on -Werror, while what Thomas is asking about is
> > using the opposite flag "-Wno-error". Can you do a non-developer build or
> > put "-Wno-error" in EXTRA_CFLAGS to test this.
> 
> Thanks, Bruce. 
> There is no compiling issue for the non-developer build and "-Wno-error" flag build.

Cool, so we can classify this patch as "rejected".




      reply	other threads:[~2019-11-27 10:33 UTC|newest]

Thread overview: 16+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2019-11-11 10:34 [dpdk-dev] [PATCH 1/2] mk: fix unsupported flag error on armhf architercture Phil Yang
2019-11-11 10:34 ` [dpdk-dev] [PATCH 2/2] doc: add aarch32 build guidance Phil Yang
2020-05-24 21:21   ` Thomas Monjalon
2020-05-25  3:20     ` Phil Yang
2020-05-27  8:28   ` Ruifeng Wang
2020-07-02  5:37     ` Phil Yang
2020-07-02  8:01       ` Jerin Jacob
2019-11-11 10:47 ` [dpdk-dev] [PATCH 1/2] mk: fix unsupported flag error on armhf architercture Bruce Richardson
2019-11-12  5:25   ` Phil Yang (Arm Technology China)
2019-11-12  6:03     ` Thomas Monjalon
2019-11-12  6:40       ` Phil Yang (Arm Technology China)
2019-11-26 17:01         ` Thomas Monjalon
2019-11-27  8:09           ` Phil Yang (Arm Technology China)
2019-11-27  9:29             ` Bruce Richardson
2019-11-27 10:00               ` Phil Yang (Arm Technology China)
2019-11-27 10:32                 ` Thomas Monjalon [this message]

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=5000317.ObS1QFYq1c@xps \
    --to=thomas@monjalon.net \
    --cc=Gavin.Hu@arm.com \
    --cc=Honnappa.Nagarahalli@arm.com \
    --cc=Joyce.Kong@arm.com \
    --cc=Phil.Yang@arm.com \
    --cc=bruce.richardson@intel.com \
    --cc=david.marchand@redhat.com \
    --cc=dev@dpdk.org \
    --cc=jerinj@marvell.com \
    --cc=nd@arm.com \
    --cc=stable@dpdk.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.