Re: [PATCH] mlx4: Add support for EEH error recovery

[Shlomo Pongartz <shlomop@mellanox.com>]

On 7/24/2012 4:12 PM, Kleber Sacilotto de Souza wrote:
> On 07/23/2012 06:26 PM, Or Gerlitz wrote:
>
>> Kleber Sacilotto de Souza <klebers@linux.vnet.ibm.com> wrote:
>>>> For powerpc we have an IBM internal user space tool that injects the
>>>> error on the bus with the aid of the system firmware. The kernel used
>>>> was built with the option:
>>>> CONFIG_EEH=y
>>>> and without the AER options. I will run some more tests with the AER
>>>> options activated.
>>> I tested the powerpc error injection with
>>>
>>> CONFIG_EEH=y
>>> CONFIG_PCIEAER=y
>>> CONFIG_PCIEAER_INJECT=m
>>>
>>> and with the aer_inject module loaded and it didn't affect the EEH
>>> recovery, the adapter recovered as expected.
>> I wasn't sure to follow what did you mean by "it didn't affect the EEH
>> recovery", how did you use the aer_inject module, is that through
>> user-space tool which is available for us?
>
> I wanted to say that I was testing before only with the EEH option
> activated, then I activated the AER options on my powerpc system just to
> make sure these options when activate wouldn't affect the EEH recovery.
> I haven't injected and AER error since I don't have a system with
> hardware support for it.
>
>
> Thanks,

Hi

Using a special extender card I've powered down the card.
None of the callbacks were called (I added printks to be sure).
Shouldn't one on the callbacks be called?

Shlomo Pongratz.