usb 2-3: new high-speed USB device number 4 using ehci_hcd
usb 2-3: New USB device found, idVendor=1f4d, idProduct=b803
usb 2-3: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 2-3: Product: RTL2838UHIDIR
usb 2-3: Manufacturer: Realtek
usb 2-3: SerialNumber: 00000041
rtl28xxu_probe: interface=0
check for warm bda 2831
check for warm 14aa 160
check for warm 14aa 161
something went very wrong, device was not found in current device list - let's see what comes next.
check for warm ccd a9
check for warm 1f4d b803
dvb-usb: found a 'G-Tek Electronics Group Lifeview LV5TDLX DVB-T' in warm state.
power control: 1
rtl2832u_power_ctrl: onoff=1
dvb-usb: will pass the complete MPEG2 transport stream to the software demuxer.
all in all I will use 24576 bytes for streaming
allocating buffer 0
buffer 0: ffff8800c05c5000 (dma: 3227275264)
allocating buffer 1
buffer 1: ffff8800bddf0000 (dma: 3185508352)
allocating buffer 2
buffer 2: ffff8800bde04000 (dma: 3185590272)
allocating buffer 3
buffer 3: ffff8800bde84000 (dma: 3186114560)
allocating buffer 4
buffer 4: ffff8800c3daa000 (dma: 3285884928)
allocating buffer 5
buffer 5: ffff8800bddbc000 (dma: 3185295360)
allocation successful
DVB: registering new adapter (G-Tek Electronics Group Lifeview LV5TDLX DVB-T)
DVB: register adapter0/demux0 @ minor: 0 (0x00)
DVB: register adapter0/dvr0 @ minor: 1 (0x01)
DVB: register adapter0/net0 @ minor: 2 (0x02)
rtl2832u_frontend_attach:
rtl28xxu_ctrl_msg: failed=-32
rtl28xxu_ctrl_msg: failed=-32
rtl28xxu_ctrl_msg: failed=-32
rtl28xxu_ctrl_msg: failed=-32
rtl28xxu_ctrl_msg: failed=-32
rtl28xxu_ctrl_msg: failed=-32
rtl28xxu_ctrl_msg: failed=-32
rtl28xxu_ctrl_msg: failed=-32
rtl28xxu: rtl2832u_frontend_attach: FC0012 tuner found
rtl2832: rtl2832_attach
dvb_register_frontend
DVB: registering adapter 0 frontend 0 (Realtek RTL2832 (DVB-T))...
DVB: register adapter0/frontend0 @ minor: 3 (0x03)
dvb_frontend_clear_cache() Clearing cache for delivery system 3
rtl2832u_tuner_attach:
fc0012: Fitipower FC0012 successfully attached.
Registered IR keymap rc-empty
input: IR-receiver inside an USB DVB receiver as /devices/pci0000:00/0000:00:04.1/usb2/2-3/rc/rc1/input13
rc1: IR-receiver inside an USB DVB receiver as /devices/pci0000:00/0000:00:04.1/usb2/2-3/rc/rc1
dvb-usb: schedule remote query interval to 400 msecs.
power control: 0
rtl2832u_power_ctrl: onoff=0
dvb-usb: G-Tek Electronics Group Lifeview LV5TDLX DVB-T successfully initialized and connected.
rtl28xxu_probe: interface=1