From: ludovic.desroches@atmel.com (ludovic.desroches)
To: linux-arm-kernel@lists.infradead.org
Subject: Kernel oops since v3.5.x on Atmel chips
Date: Wed, 22 Aug 2012 12:28:42 +0200 [thread overview]
Message-ID: <5034B45A.5060107@atmel.com> (raw)
Hi,
Doing some tests with the help of Lava (a Linaro tool), I get some
kernel oops with 3.5.x on several chips at91sam9260, at91sam9261 and
at91sam9m10g45.
Most of the time the oops comes from the cascade BUG() call in
kernel/timer.c but sometimes it comes from a bad PC value.
With Lava, I got the crash each time. It happens after mounting a mtd
partition, copying a file from it, removing this file from the flash
memory and then unmounting the mtd partition.
I couldn't reproduce manually this issue so maybe there is something
related to time...
Here I paste the usual oops and the one with the bad PC value:
Starting kernel ...
Uncompressing Linux... done, booting the kernel.
Booting Linux on physical CPU 0
Linux version 3.5.0 (ldesroches at ibiza) (gcc version 4.6.1 (Ubuntu/Linaro
4.6.1-9ubuntu3) ) #10 Wed Aug 22 09:17:23 CEST 2012
CPU: ARM926EJ-S [41069265] revision 5 (ARMv5TEJ), cr=00053177
CPU: VIVT data cache, VIVT instruction cache
Machine: Atmel AT91SAM9260-EK
Memory policy: ECC disabled, Data cache writeback
AT91: Detected soc type: at91sam9260
AT91: Detected soc subtype: Unknown
AT91: sram at 0x2ff000 of 0x2000 mapped at 0xfef76000
Clocks: CPU 198 MHz, master 99 MHz, main 18.432 MHz
Built 1 zonelists in Zone order, mobility grouping on. Total pages: 16256
Kernel command line: mem=64M console=ttyS0,115200
mtdparts=atmel_nand:4M(bootstrap/uboot/kernel)ro,70M(rootfs),-(data)
root=/dev/mtdblock1 rw rootfstype=jffs2 ip=192.168.1.16:::255.255.255.0:::
PID hash table entries: 256 (order: -2, 1024 bytes)
Dentry cache hash table entries: 8192 (order: 3, 32768 bytes)
Inode-cache hash table entries: 4096 (order: 2, 16384 bytes)
Memory: 64MB = 64MB total
Memory: 60848k/60848k available, 4688k reserved, 0K highmem
Virtual kernel memory layout:
vector : 0xffff0000 - 0xffff1000 ( 4 kB)
fixmap : 0xfff00000 - 0xfffe0000 ( 896 kB)
vmalloc : 0xc4800000 - 0xff000000 ( 936 MB)
lowmem : 0xc0000000 - 0xc4000000 ( 64 MB)
modules : 0xbf000000 - 0xc0000000 ( 16 MB)
.text : 0xc0008000 - 0xc039fee8 (3680 kB)
.init : 0xc03a0000 - 0xc03bd7c4 ( 118 kB)
.data : 0xc03be000 - 0xc03e8f00 ( 172 kB)
.bss : 0xc03e8f24 - 0xc03fb138 ( 73 kB)
NR_IRQS:192
AT91: 96 gpio irqs in 3 banks
sched_clock: 32 bits at 100 Hz, resolution 10000000ns, wraps every
4294967286ms
Console: colour dummy device 80x30
Calibrating delay loop... 98.71 BogoMIPS (lpj=493568)
pid_max: default: 32768 minimum: 301
Mount-cache hash table entries: 512
CPU: Testing write buffer coherency: ok
Setting up static identity map for 0x202af150 - 0x202af1a8
devtmpfs: initialized
NET: Registered protocol family 16
AT91: Power Management (with slow clock mode)
AT91: Starting after software reset
bio: create slab <bio-0> at 0
SCSI subsystem initialized
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
Advanced Linux Sound Architecture Driver Version 1.0.25.
Switching to clocksource pit
cfg80211: Calling CRDA to update world regulatory domain
NET: Registered protocol family 2
IP route cache hash table entries: 1024 (order: 0, 4096 bytes)
TCP established hash table entries: 2048 (order: 2, 16384 bytes)
TCP bind hash table entries: 2048 (order: 1, 8192 bytes)
TCP: Hash tables configured (established 2048 bind 2048)
TCP: reno registered
UDP hash table entries: 256 (order: 0, 4096 bytes)
UDP-Lite hash table entries: 256 (order: 0, 4096 bytes)
NET: Registered protocol family 1
RPC: Registered named UNIX socket transport module.
RPC: Registered udp transport module.
RPC: Registered tcp transport module.
RPC: Registered tcp NFSv4.1 backchannel transport module.
jffs2: version 2.2. (NAND) (SUMMARY) ? 2001-2006 Red Hat, Inc.
msgmni has been set to 118
io scheduler noop registered (default)
atmel_usart.0: ttyS0 at MMIO 0xfffff200 (irq = 1) is a ATMEL_SERIAL
console [ttyS0] enabled
atmel_usart.1: ttyS1 at MMIO 0xfffb0000 (irq = 6) is a ATMEL_SERIAL
atmel_usart.2: ttyS2 at MMIO 0xfffb4000 (irq = 7) is a ATMEL_SERIAL
brd: module loaded
loop: module loaded
atmel_nand: Use On Flash BBT
atmel_nand atmel_nand: No DMA support for NAND access.
NAND device: Manufacturer ID: 0xec, Chip ID: 0xda (Samsung NAND 256MiB
3,3V 8-bit), page size: 2048, OOB size: 64
Bad block table found at page 131008, version 0x01
Bad block table found at page 130944, version 0x01
nand_read_bbt: bad block at 0x000009840000
nand_read_bbt: bad block at 0x00000fb80000
3 cmdlinepart partitions found on MTD device atmel_nand
Creating 3 MTD partitions on "atmel_nand":
0x000000000000-0x000000400000 : "bootstrap/uboot/kernel"
0x000000400000-0x000004a00000 : "rootfs"
0x000004a00000-0x000010000000 : "data"
MACB_mii_bus: probed
macb macb: eth0: Cadence MACB at 0xfffc4000 irq 21 (3a:1f:34:08:54:54)
macb macb: eth0: attached PHY driver [Davicom DM9161A]
(mii_bus:phy_addr=macb-ffffffff:00, irq=-1)
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
at91_ohci at91_ohci: can't request overcurrent gpio 0
at91_ohci at91_ohci: AT91 OHCI
at91_ohci at91_ohci: new USB bus registered, assigned bus number 1
at91_ohci at91_ohci: irq 20, io mem 0x00500000
usb usb1: New USB device found, idVendor=1d6b, idProduct=0001
usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: Product: AT91 OHCI
usb usb1: Manufacturer: Linux 3.5.0 ohci_hcd
usb usb1: SerialNumber: at91
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 2 ports detected
usbcore: registered new interface driver cdc_acm
cdc_acm: USB Abstract Control Model driver for USB modems and ISDN adapters
Initializing USB Mass Storage driver...
usbcore: registered new interface driver usb-storage
USB Mass Storage support registered.
mousedev: PS/2 mouse device common for all mice
TCP: cubic registered
NET: Registered protocol family 17
lib80211: common routines for IEEE802.11 drivers
VFP support v0.3: not present
input: gpio-keys as /devices/platform/gpio-keys/input/input0
/home/ldesroches/workspace/linux/drivers/rtc/hctosys.c: unable to open
rtc device (rtc0)
IP-Config: Complete:
device=eth0, addr=192.168.1.16, mask=255.255.255.0, gw=255.255.255.255
host=192.168.1.16, domain=, nis-domain=(none)
bootserver=255.255.255.255, rootserver=255.255.255.255, rootpath=
ALSA device list:
No soundcards found.
macb macb: eth0: link up (100/Full)
jffs2: Empty flash at 0x01fb1c68 ends at 0x01fb2000
VFS: Mounted root (jffs2 filesystem) on device 31:1.
devtmpfs: mounted
Freeing init memory: 116K
Starting logging: OK
Populating using udev: udevd[468]: starting version 182
done
Starting portmap: done
Initializing random number generator... done.
Starting network...
ip: RTNETLINK answers: File exists
Starting sshd: OK
Welcome to Buildroot
at91 login: root
[root at at91 ~]#
[root at at91 ~]#
[root at at91 ~]# export PS1="$PS1 [rc=$(echo \$?)]: "
[root at at91 ~]# [rc=0]: mount -t jffs2 /dev/mtdblock2 /mnt/
jffs2: Empty flash at 0x01fb1c68 ends at 0x01fb2000
o_at91_lava/tmp [rc=0]: rm -rf /tmp/lava_results.tgz
/tmp//srv/lava/instances/rf
[root at at91 ~]# [rc=0]: mkdir -p /tmp//srv/lava/instances/rfo_at91_lava/tmp
tmp//srv/lava/instances/rfo_at91_lava/tmp/instances/rfo_at91_lava/tmp/*.bundle
/
eroot at at91 ~]# [rc=0]: rm -f
/mnt//srv/lava/instances/rfo_at91_lava/tmp/*.bundl
[root at at91 ~]# [rc=0]: umount /mnt/
[root at at91 ~]# [rc=0]: ------------[ cut here ]------------
kernel BUG at /home/ldesroches/workspace/linux/kernel/timer.c:1091!
Internal error: Oops - BUG: 0 [#1] ARM
Modules linked in:
CPU: 0 Not tainted (3.5.0 #10)
PC is at cascade+0x54/0x78
LR is at cascade+0x60/0x78
pc : [<c0023c80>] lr : [<c0023c8c>] psr: a0000093
sp : c03bfec8 ip : ffffae00 fp : 00000000
r10: c03ee540 r9 : 0000000a r8 : 00000100
r7 : c03bfec8 r6 : c03bfec8 r5 : 0000002e r4 : c03ee6a0
r3 : 00000000 r2 : 00000068 r1 : c3a60738 r0 : c03ee9ec
Flags: NzCv IRQs off FIQs on Mode SVC_32 ISA ARM Segment kernel
Control: 0005317f Table: 23a58000 DAC: 00000017
Process swapper (pid: 0, stack limit = 0xc03be270)
Stack: (0xc03bfec8 to 0xc03c0000)
fec0: c03faf70 c3a60738 0000002e c03ee6a0 c03be000
00000000
fee0: c03ee560 c0023d98 c0145bc4 c3952ba0 00000000 00000000 c03cddf4
00000001
ff00: 00000004 c03be000 c03ee560 00000100 c03ee540 c001f4b0 000027da
c03cddf4
ff20: 00000000 00000001 c03bff9c 00000001 00000000 fefff000 c03bff9c
20004000
ff40: 41069265 203b834c 00000000 c001f890 fefff000 c000dfc8 c000e0cc
c000e0e0
ff60: a0000013 c000d398 00000000 0005317f 0005217f a0000013 c03be000
c03c8f54
ff80: c03e8fe8 c047c300 20004000 41069265 203b834c 00000000 a00000d3
c03bffb0
ffa0: c000e0cc c000e0e0 a0000013 ffffffff c000e0b4 c000e27c c03c60b0
ffffffff
ffc0: c03b9784 c03a070c ffffffff ffffffff c03a0274 00000000 00000000
c03b9784
ffe0: 00000000 00053175 c03c603c c03b9780 c03c8f4c 20008040 00000000
00000000
[<c0023c80>] (cascade+0x54/0x78) from [<c0023d98>]
(run_timer_softirq+0x68/0x1f4)
[<c0023d98>] (run_timer_softirq+0x68/0x1f4) from [<c001f4b0>]
(__do_softirq+0x7c/0x110)
[<c001f4b0>] (__do_softirq+0x7c/0x110) from [<c001f890>]
(irq_exit+0x40/0x4c)
[<c001f890>] (irq_exit+0x40/0x4c) from [<c000dfc8>] (handle_IRQ+0x74/0x98)
[<c000dfc8>] (handle_IRQ+0x74/0x98) from [<c000d398>] (__irq_svc+0x38/0x60)
[<c000d398>] (__irq_svc+0x38/0x60) from [<c000e0e0>]
(default_idle+0x2c/0x34)
[<c000e0e0>] (default_idle+0x2c/0x34) from [<c000e27c>] (cpu_idle+0x78/0xd8)
[<c000e27c>] (cpu_idle+0x78/0xd8) from [<c03a070c>]
(start_kernel+0x280/0x2d0)
Code: e591300c e3c33001 e1540003 0a000000 (e7f001f2)
---[ end trace 6105dc3872c7de5d ]---
Kernel panic - not syncing: Fatal exception in interrupt
Starting kernel ...
Uncompressing Linux... done, booting the kernel.
Booting Linux on physical CPU 0
Linux version 3.5.0 (ldesroches at ibiza) (gcc version 4.6.1 (Ubuntu/Linaro
4.6.1-9ubuntu3) ) #10 Wed Aug 22 09:17:23 CEST 2012
CPU: ARM926EJ-S [41069265] revision 5 (ARMv5TEJ), cr=00053177
CPU: VIVT data cache, VIVT instruction cache
Machine: Atmel AT91SAM9260-EK
Memory policy: ECC disabled, Data cache writeback
AT91: Detected soc type: at91sam9260
AT91: Detected soc subtype: Unknown
AT91: sram at 0x2ff000 of 0x2000 mapped at 0xfef76000
Clocks: CPU 198 MHz, master 99 MHz, main 18.432 MHz
Built 1 zonelists in Zone order, mobility grouping on. Total pages: 16256
Kernel command line: mem=64M console=ttyS0,115200
mtdparts=atmel_nand:4M(bootstrap/uboot/kernel)ro,70M(rootfs),-(data)
root=/dev/mtdblock1 rw rootfstype=jffs2 ip=192.168.1.16:::255.255.255.0:::
PID hash table entries: 256 (order: -2, 1024 bytes)
Dentry cache hash table entries: 8192 (order: 3, 32768 bytes)
Inode-cache hash table entries: 4096 (order: 2, 16384 bytes)
Memory: 64MB = 64MB total
Memory: 60848k/60848k available, 4688k reserved, 0K highmem
Virtual kernel memory layout:
vector : 0xffff0000 - 0xffff1000 ( 4 kB)
fixmap : 0xfff00000 - 0xfffe0000 ( 896 kB)
vmalloc : 0xc4800000 - 0xff000000 ( 936 MB)
lowmem : 0xc0000000 - 0xc4000000 ( 64 MB)
modules : 0xbf000000 - 0xc0000000 ( 16 MB)
.text : 0xc0008000 - 0xc039fee8 (3680 kB)
.init : 0xc03a0000 - 0xc03bd7c4 ( 118 kB)
.data : 0xc03be000 - 0xc03e8f00 ( 172 kB)
.bss : 0xc03e8f24 - 0xc03fb138 ( 73 kB)
NR_IRQS:192
AT91: 96 gpio irqs in 3 banks
sched_clock: 32 bits at 100 Hz, resolution 10000000ns, wraps every
4294967286ms
Console: colour dummy device 80x30
Calibrating delay loop... 98.71 BogoMIPS (lpj=493568)
pid_max: default: 32768 minimum: 301
Mount-cache hash table entries: 512
CPU: Testing write buffer coherency: ok
Setting up static identity map for 0x202af150 - 0x202af1a8
devtmpfs: initialized
NET: Registered protocol family 16
AT91: Power Management (with slow clock mode)
AT91: Starting after software reset
bio: create slab <bio-0> at 0
SCSI subsystem initialized
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
Advanced Linux Sound Architecture Driver Version 1.0.25.
Switching to clocksource pit
cfg80211: Calling CRDA to update world regulatory domain
NET: Registered protocol family 2
IP route cache hash table entries: 1024 (order: 0, 4096 bytes)
TCP established hash table entries: 2048 (order: 2, 16384 bytes)
TCP bind hash table entries: 2048 (order: 1, 8192 bytes)
TCP: Hash tables configured (established 2048 bind 2048)
TCP: reno registered
UDP hash table entries: 256 (order: 0, 4096 bytes)
UDP-Lite hash table entries: 256 (order: 0, 4096 bytes)
NET: Registered protocol family 1
RPC: Registered named UNIX socket transport module.
RPC: Registered udp transport module.
RPC: Registered tcp transport module.
RPC: Registered tcp NFSv4.1 backchannel transport module.
jffs2: version 2.2. (NAND) (SUMMARY) ? 2001-2006 Red Hat, Inc.
msgmni has been set to 118
io scheduler noop registered (default)
atmel_usart.0: ttyS0 at MMIO 0xfffff200 (irq = 1) is a ATMEL_SERIAL
console [ttyS0] enabled
atmel_usart.1: ttyS1 at MMIO 0xfffb0000 (irq = 6) is a ATMEL_SERIAL
atmel_usart.2: ttyS2 at MMIO 0xfffb4000 (irq = 7) is a ATMEL_SERIAL
brd: module loaded
loop: module loaded
atmel_nand: Use On Flash BBT
atmel_nand atmel_nand: No DMA support for NAND access.
NAND device: Manufacturer ID: 0xec, Chip ID: 0xda (Samsung NAND 256MiB
3,3V 8-bit), page size: 2048, OOB size: 64
Bad block table found at page 131008, version 0x01
Bad block table found at page 130944, version 0x01
nand_read_bbt: bad block at 0x000009840000
nand_read_bbt: bad block at 0x00000fb80000
3 cmdlinepart partitions found on MTD device atmel_nand
Creating 3 MTD partitions on "atmel_nand":
0x000000000000-0x000000400000 : "bootstrap/uboot/kernel"
0x000000400000-0x000004a00000 : "rootfs"
0x000004a00000-0x000010000000 : "data"
MACB_mii_bus: probed
macb macb: eth0: Cadence MACB at 0xfffc4000 irq 21 (3a:1f:34:08:54:54)
macb macb: eth0: attached PHY driver [Davicom DM9161A]
(mii_bus:phy_addr=macb-ffffffff:00, irq=-1)
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
at91_ohci at91_ohci: can't request overcurrent gpio 0
at91_ohci at91_ohci: AT91 OHCI
at91_ohci at91_ohci: new USB bus registered, assigned bus number 1
at91_ohci at91_ohci: irq 20, io mem 0x00500000
usb usb1: New USB device found, idVendor=1d6b, idProduct=0001
usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: Product: AT91 OHCI
usb usb1: Manufacturer: Linux 3.5.0 ohci_hcd
usb usb1: SerialNumber: at91
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 2 ports detected
usbcore: registered new interface driver cdc_acm
cdc_acm: USB Abstract Control Model driver for USB modems and ISDN adapters
Initializing USB Mass Storage driver...
usbcore: registered new interface driver usb-storage
USB Mass Storage support registered.
mousedev: PS/2 mouse device common for all mice
TCP: cubic registered
NET: Registered protocol family 17
lib80211: common routines for IEEE802.11 drivers
VFP support v0.3: not present
input: gpio-keys as /devices/platform/gpio-keys/input/input0
/home/ldesroches/workspace/linux/drivers/rtc/hctosys.c: unable to open
rtc device (rtc0)
IP-Config: Complete:
device=eth0, addr=192.168.1.16, mask=255.255.255.0, gw=255.255.255.255
host=192.168.1.16, domain=, nis-domain=(none)
bootserver=255.255.255.255, rootserver=255.255.255.255, rootpath=
ALSA device list:
No soundcards found.
macb macb: eth0: link up (100/Full)
jffs2: Empty flash at 0x01fb1c68 ends at 0x01fb2000
VFS: Mounted root (jffs2 filesystem) on device 31:1.
devtmpfs: mounted
Freeing init memory: 116K
Starting logging: OK
Populating using udev: done
udevd[468]: starting version 182
Starting portmap: done
Initializing random number generator... done.
Starting network...
ip: RTNETLINK answers: File exists
Starting sshd: OK
Welcome to Buildroot
at91 login: root
[root at at91 ~]#
[root at at91 ~]#
[root at at91 ~]# export PS1="$PS1 [rc=$(echo \$?)]: "
[root at at91 ~]# [rc=0]: mount -t jffs2 /dev/mtdblock2 /mnt/
jffs2: Empty flash at 0x01fb1c68 ends at 0x01fb2000
o_at91_lava/tmp [rc=0]: rm -rf /tmp/lava_results.tgz
/tmp//srv/lava/instances/rf
[root at at91 ~]# [rc=0]: mkdir -p /tmp//srv/lava/instances/rfo_at91_lava/tmp
tmp//srv/lava/instances/rfo_at91_lava/tmp/instances/rfo_at91_lava/tmp/*.bundle
/
eroot at at91 ~]# [rc=0]: rm -f
/mnt//srv/lava/instances/rfo_at91_lava/tmp/*.bundl
[root at at91 ~]# [rc=0]: umount /mnt/
[root at at91 ~]# [rc=0]: Unable to handle kernel paging request at
virtual address 0d0c951c
pgd = c0004000
[0d0c951c] *pgd=00000000
Internal error: Oops: 80000005 [#1] ARM
Modules linked in:
CPU: 0 Not tainted (3.5.0 #10)
PC is at 0xd0c951c
LR is at run_timer_softirq+0x144/0x1f4
pc : [<0d0c951c>] lr : [<c0023e74>] psr: 20000013
sp : c03bfee8 ip : 00200200 fp : 00000000
r10: 0d0c951c r9 : 0000000a r8 : c03bfef0
r7 : c03ee560 r6 : 00000100 r5 : c03be000 r4 : c03ee6a0
r3 : 20000013 r2 : 00000000 r1 : c03bfef0 r0 : b5a01535
Flags: nzCv IRQs on FIQs on Mode SVC_32 ISA ARM Segment kernel
Control: 0005317f Table: 23a58000 DAC: 00000017
Process swapper (pid: 0, stack limit = 0xc03be270)
Stack: (0xc03bfee8 to 0xc03c0000)
fee0: c0145bc4 c396dba0 c03bfef0 c03bfef0 c03cddf4
00000001
ff00: 00000004 c03be000 c03ee560 00000100 c03ee540 c001f4b0 00002870
c03cddf4
ff20: 00000000 00000001 c03bff9c 00000001 00000000 fefff000 c03bff9c
20004000
ff40: 41069265 203b834c 00000000 c001f890 fefff000 c000dfc8 c000e0cc
c000e0e0
ff60: a0000013 c000d398 00000000 0005317f 0005217f a0000013 c03be000
c03c8f54
ff80: c03e8fe8 c047c300 20004000 41069265 203b834c 00000000 a00000d3
c03bffb0
ffa0: c000e0cc c000e0e0 a0000013 ffffffff c000e0b4 c000e27c c03c60b0
ffffffff
ffc0: c03b9784 c03a070c ffffffff ffffffff c03a0274 00000000 00000000
c03b9784
ffe0: 00000000 00053175 c03c603c c03b9780 c03c8f4c 20008040 00000000
00000000
[<c0023e74>] (run_timer_softirq+0x144/0x1f4) from [<c001f4b0>]
(__do_softirq+0x7c/0x110)
[<c001f4b0>] (__do_softirq+0x7c/0x110) from [<c001f890>]
(irq_exit+0x40/0x4c)
[<c001f890>] (irq_exit+0x40/0x4c) from [<c000dfc8>] (handle_IRQ+0x74/0x98)
[<c000dfc8>] (handle_IRQ+0x74/0x98) from [<c000d398>] (__irq_svc+0x38/0x60)
[<c000d398>] (__irq_svc+0x38/0x60) from [<c000e0e0>]
(default_idle+0x2c/0x34)
[<c000e0e0>] (default_idle+0x2c/0x34) from [<c000e27c>] (cpu_idle+0x78/0xd8)
[<c000e27c>] (cpu_idle+0x78/0xd8) from [<c03a070c>]
(start_kernel+0x280/0x2d0)
Code: bad PC value
---[ end trace f65db9c681fbd6e3 ]---
Kernel panic - not syncing: Fatal exception in interrupt
Regards
Ludovic
next reply other threads:[~2012-08-22 10:28 UTC|newest]
Thread overview: 14+ messages / expand[flat|nested] mbox.gz Atom feed top
2012-08-22 10:28 ludovic.desroches [this message]
2012-08-22 15:00 ` JFFS2 issue with v3.5.x and later on Atmel chips at least (was: Kernel oops since v3.5.x on Atmel chips) ludovic.desroches
2012-08-22 15:00 ` ludovic.desroches
2012-08-23 6:35 ` Artem Bityutskiy
2012-08-23 6:35 ` Artem Bityutskiy
2012-08-23 6:35 ` Artem Bityutskiy
2012-08-23 7:41 ` Artem Bityutskiy
2012-08-23 7:41 ` Artem Bityutskiy
2012-08-23 7:41 ` Artem Bityutskiy
2012-08-23 9:05 ` JFFS2 issue with v3.5.x and later on Atmel chips at least ludovic.desroches
2012-08-23 9:05 ` ludovic.desroches
2012-08-23 12:37 ` Artem Bityutskiy
2012-08-23 12:37 ` Artem Bityutskiy
2012-08-23 12:37 ` Artem Bityutskiy
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=5034B45A.5060107@atmel.com \
--to=ludovic.desroches@atmel.com \
--cc=linux-arm-kernel@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.