From mboxrd@z Thu Jan 1 00:00:00 1970 Message-ID: <506F6283.2040901@xenomai.org> Date: Sat, 06 Oct 2012 00:43:15 +0200 From: Gilles Chanteperdrix MIME-Version: 1.0 References: <1349212116.21898.108.camel@ENG-09-LX.emacinc.com> <506B5D6B.80005@xenomai.org> <506B5E0E.5050900@xenomai.org> <1349369822.3775.107.camel@ENG-09-LX.emacinc.com> <506DC2DA.5000105@xenomai.org> <506E9510.7090105@xenomai.org> <1349462858.26881.43.camel@ENG-09-LX.emacinc.com> <506F402A.9030102@xenomai.org> <1349473634.26881.221.camel@ENG-09-LX.emacinc.com> In-Reply-To: <1349473634.26881.221.camel@ENG-09-LX.emacinc.com> Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 7bit Subject: Re: [Xenomai] Adeos I-Pipe patch problem on vendor-specific kernel List-Id: Discussions about the Xenomai project List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , To: Wayne Warren Cc: xenomai@xenomai.org On 10/05/2012 11:47 PM, Wayne Warren wrote: > The impression I had from the wiki page was that earlyprintk and your > advice has no arguments, but the Documentation/kernel-parameters.txt > file confused me on that issue. That is because it documents this option for x86, not ARM. > > Something else I was looking at was attempting to hard code the > omap_phys_addr and omap_virt_addr values in > arch/arm/mach-omap2/include/mach/debug-macro.S--I know the first value > from the technical reference manual, not sure about the other. For the third time, see: arch/arm/plat-omap/include/plat/uncompress.h That is where the virtual and physical addresses are set for OMAP based processors. -- Gilles.