From: Marc Gonzalez <marc.w.gonzalez@free.fr>
To: MSM <linux-arm-msm@vger.kernel.org>, PCI <linux-pci@vger.kernel.org>
Cc: Jeffrey Hugo <jhugo@codeaurora.org>,
Bjorn Andersson <bjorn.andersson@linaro.org>,
Lee Jones <lee.jones@linaro.org>,
Evan Green <evgreen@chromium.org>,
Douglas Anderson <dianders@chromium.org>
Subject: Re: WIP: PCIe on MSM8998
Date: Wed, 20 Feb 2019 10:24:41 +0100 [thread overview]
Message-ID: <50873e4c-72c0-88ac-cf55-b11c2e0ce644@free.fr> (raw)
In-Reply-To: <c97b6f4e-4b4c-027f-5a0b-80b3f7054177@free.fr>
On 19/02/2019 17:54, Marc Gonzalez wrote:
> Current situation: HANG + REBOOT :-)
> Probably some silly typo in an address in my DT. Investigating...
>
> # modprobe phy-qcom-qmp
> REMAP: PA=0c010000 VA=ffffff8010005000 SIZE=18c
> REMAP: PA=0c010200 VA=ffffff801000d200 SIZE=128
> REMAP: PA=0c010400 VA=ffffff801002d400 SIZE=200
> REMAP: PA=0c010c00 VA=ffffff8010035c00 SIZE=20c
> REMAP: PA=0c010600 VA=ffffff8010051600 SIZE=128
> REMAP: PA=0c010800 VA=ffffff8010053800 SIZE=200
> qcom-qmp-phy c010000.phy: PHY pcs_misc-reg not used
> qcom-qmp-phy c010000.phy: Registered Qcom-QMP phy
> [ CLK_BASE + 6b004] = 00282000
> REMAP: PA=01c00000 VA=ffffff8010b72000 SIZE=2000
> REMAP: PA=01c06000 VA=ffffff8010055000 SIZE=1000
> REMAP: PA=1b000000 VA=ffffff801005d000 SIZE=f1d
> REMAP: PA=01c07000 VA=ffffff8010065000 SIZE=200
> REMAP: PA=1b000f20 VA=ffffff801006df20 SIZE=a8
> REMAP: PA=01c07200 VA=ffffff8010075200 SIZE=200
> [ CLK_BASE + 6b004] = a0282001
> REMAP: PA=01c07400 VA=ffffff801007d400 SIZE=200
> qcom-qmp-phy 1c06000.phy: PHY pcs_misc-reg not used
> qcom-qmp-phy 1c06000.phy: Registered Qcom-QMP phy
> [ CLK_BASE + 6b004] = 00282000
> REMAP: PA=01c00000 VA=ffffff8010d02000 SIZE=2000
> REMAP: PA=1b000000 VA=ffffff801005d000 SIZE=f1d
> REMAP: PA=1b000f20 VA=ffffff801006df20 SIZE=a8
> qcom-pcie 1b000000.pci: 1b000000.pci supply vdda not found, using dummy regulator
> qcom-pcie 1b000000.pci: 1b000000.pci supply vddpe-3v3 not found, using dummy regulator
> qcom-qmp-phy 1c06000.phy: Initializing QMP phy
> [ CLK_BASE + 6f000] = 00000001
> [ CLK_BASE + 6f014] = 00000001
> [ CLK_BASE + 6f00c] = 00000001
> [ CLK_BASE + 6f00c] = 00000000
> [ CLK_BASE + 6f014] = 00000000
> [ CLK_BASE + 6f000] = 00000000
> [ CLK_BASE + 6f004] = 80000001
> [ CLK_BASE + 6b010] = 80008001
> [ CLK_BASE + 8800c] = 80000001
> [ PCIE_DBI + 00404] = 0000000b
> [ PCIE_DBI + 00034] = 0000001c
> [ PCIE_DBI + 00038] = 00000010
> [ PCIE_DBI + 00174] = 00000033
> [ PCIE_DBI + 00194] = 00000006
> [ PCIE_DBI + 000c8] = 00000042
> [ PCIE_DBI + 00128] = 00000000
> [ PCIE_DBI + 00144] = 000000ff
> [ PCIE_DBI + 00148] = 0000001f
> [ PCIE_DBI + 00178] = 00000001
> [ PCIE_DBI + 0019c] = 00000001
> [ PCIE_DBI + 0018c] = 00000000
> [ PCIE_DBI + 00184] = 0000000a
> [ PCIE_DBI + 0000c] = 00000009
> [ PCIE_DBI + 000d0] = 00000082
> [ PCIE_DBI + 000e4] = 00000003
> [ PCIE_DBI + 000e0] = 00000055
> [ PCIE_DBI + 000dc] = 00000055
> [ PCIE_DBI + 00054] = 00000000
> [ PCIE_DBI + 00050] = 0000001a
> [ PCIE_DBI + 0004c] = 0000000a
> [ PCIE_DBI + 00174] = 00000033
> [ PCIE_DBI + 0003c] = 00000002
> [ PCIE_DBI + 00040] = 0000001f
> [ PCIE_DBI + 000ac] = 00000004
> [ PCIE_DBI + 00078] = 0000000b
> [ PCIE_DBI + 00084] = 00000016
> [ PCIE_DBI + 00090] = 00000028
> [ PCIE_DBI + 0010c] = 00000000
> [ PCIE_DBI + 00108] = 00000080
> [ PCIE_DBI + 00010] = 00000001
> [ PCIE_DBI + 0001c] = 00000031
> [ PCIE_DBI + 00020] = 00000001
> [ PCIE_DBI + 00014] = 00000002
> [ PCIE_DBI + 00018] = 00000000
> [ PCIE_DBI + 00024] = 0000002f
> [ PCIE_DBI + 00028] = 00000019
> [ PCIE_DBI + 000c4] = 00000015
> [ PCIE_DBI + 00070] = 0000000f
> [ PCIE_DBI + 00048] = 0000000f
> [ PCIE_DBI + 00074] = 00000019
> [ PCIE_DBI + 00038] = 00000010
> [ PCIE_DBI + 00178] = 00000000
> [ PCIE_DBI + 000c4] = 00000040
> [ PCIE_DBI + 00400] = 0000000a
> [ PCIE_DBI + 00408] = 0000000b
> [ CLK_BASE + 6b018] = 80004001
> [ PCIE_DBI + 00068] = 00000045
> [ PCIE_DBI + 00094] = 00000006
> [ 01c07200 + 00110] = 0000001c
> [ 01c07200 + 000d8] = 00000001
> [ 01c07200 + 000dc] = 00000000
> [ 01c07200 + 000e0] = 000000db
> [ 01c07200 + 00120] = 00000018
> [ 01c07200 + 0001c] = 00000004
> [ 01c07200 + 00010] = 00000004
> [ 01c07200 + 00048] = 0000004b
> [ 01c07200 + 0011c] = 00000014
> [ 01c07200 + 00118] = 00000019
> [ 01c07400 + 00058] = 0000004c
> [ 01c07400 + 000a0] = 00000000
> [ 01c07400 + 000a4] = 00000001
> [ 01c07400 + 000a8] = 00000005
> [ 01c07400 + 00054] = 00000005
> [ 01c07400 + 00004] = 00000002
> [ 01c07400 + 0006c] = 00000000
> [ 01c07400 + 00060] = 000000a3
> [ 01c07400 + 00028] = 0000000e
> [ 01c07400 + 00004] = 00000003
> [ 01c07400 + 00000] = 00000000
> [ 01c07400 + 00008] = 0000000a
> qcom-pcie 1b000000.pci: host bridge /soc/pci@1b000000 ranges:
> qcom-pcie 1b000000.pci: Parsing ranges property...
> qcom-pcie 1b000000.pci: IO 0x1b200000..0x1b2fffff -> 0x1b200000
> qcom-pcie 1b000000.pci: MEM 0x1b300000..0x1bffffff -> 0x1b300000
> REMAP: PA=1b100000 VA=ffffff8011400000 SIZE=80000
> REMAP: PA=1b180000 VA=ffffff8011500000 SIZE=80000
> [ CLK_BASE + 6b014] = 80000001
> [ CLK_BASE + 6b00c] = 80004221
> [ CLK_BASE + 6b008] = 8000c221
> [ PCIE_PARF + 00040] = 00000000
> [ PCIE_PARF + 00168] = 00000000
> [ PCIE_PARF + 00000] = 00000000
> [ PCIE_PARF + 00174] = 00000010
> [ PCIE_PARF + 001a8] = 80000000
> dw_pcie_read: addr=ffffff801005d710 size=4
> Internal error: synchronous external abort: 96000210 [#1] PREEMPT SMP
> Modules linked in: phy_qcom_qmp
> ...
> Call trace:
> dw_pcie_read+0x90/0x110
> __dw_pcie_read_dbi+0x70/0xa0
> dw_pcie_setup+0x60/0x160
> dw_pcie_setup_rc+0x38/0x360
> qcom_pcie_host_init+0xbc/0x160
> dw_pcie_host_init+0x248/0x510
> qcom_pcie_probe+0x20c/0x250
The splat occurs when dw_pcie_setup() executes
val = dw_pcie_readl_dbi(pci, PCIE_PORT_LINK_CONTROL);
#define PCIE_PORT_LINK_CONTROL 0x710
I'll try comparing with the downstream kernel...
next prev parent reply other threads:[~2019-02-20 9:25 UTC|newest]
Thread overview: 15+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-02-19 16:54 WIP: PCIe on MSM8998 Marc Gonzalez
2019-02-20 5:43 ` Bjorn Helgaas
2019-02-20 8:42 ` Marc Gonzalez
2019-02-20 9:24 ` Marc Gonzalez [this message]
2019-02-27 15:31 ` Marc Gonzalez
2019-03-12 15:59 ` Marc Gonzalez
2019-03-20 16:51 ` Robin Murphy
2019-03-20 20:17 ` Marc Gonzalez
2019-03-20 23:07 ` Robin Murphy
2019-03-21 12:45 ` Marc Gonzalez
2019-03-21 15:17 ` Marc Gonzalez
2019-03-21 16:48 ` Marc Gonzalez
2019-03-21 17:34 ` Marc Gonzalez
[not found] ` <2e7d4564-01ea-d0bc-51c8-2bc2c116c4cc-5wv7dgnIgG8@public.gmane.org>
2019-03-27 17:05 ` Marc Gonzalez
2019-03-27 17:05 ` Marc Gonzalez
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=50873e4c-72c0-88ac-cf55-b11c2e0ce644@free.fr \
--to=marc.w.gonzalez@free.fr \
--cc=bjorn.andersson@linaro.org \
--cc=dianders@chromium.org \
--cc=evgreen@chromium.org \
--cc=jhugo@codeaurora.org \
--cc=lee.jones@linaro.org \
--cc=linux-arm-msm@vger.kernel.org \
--cc=linux-pci@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.