[dpdk-dev] [PATCH v16 04/11] eal: remove sync version of power monitor

[Anatoly Burakov <anatoly.burakov@intel.com>]

Currently, the "sync" version of power monitor intrinsic is supposed to
be used for purposes of waking up a sleeping core. However, there are
better ways to achieve the same result, so remove the unneeded function.

Signed-off-by: Anatoly Burakov <anatoly.burakov@intel.com>
Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
---
 lib/librte_eal/arm/rte_power_intrinsics.c     | 14 -----
 .../include/generic/rte_power_intrinsics.h    | 38 -------------
 lib/librte_eal/ppc/rte_power_intrinsics.c     | 14 -----
 lib/librte_eal/version.map                    |  1 -
 lib/librte_eal/x86/rte_power_intrinsics.c     | 54 -------------------
 5 files changed, 121 deletions(-)

diff --git a/lib/librte_eal/arm/rte_power_intrinsics.c b/lib/librte_eal/arm/rte_power_intrinsics.c
index 5f1caaf25b..8d271dc0c1 100644
--- a/lib/librte_eal/arm/rte_power_intrinsics.c
+++ b/lib/librte_eal/arm/rte_power_intrinsics.c
@@ -17,20 +17,6 @@ rte_power_monitor(const struct rte_power_monitor_cond *pmc,
 	return -ENOTSUP;
 }
 
-/**
- * This function is not supported on ARM.
- */
-int
-rte_power_monitor_sync(const struct rte_power_monitor_cond *pmc,
-		const uint64_t tsc_timestamp, rte_spinlock_t *lck)
-{
-	RTE_SET_USED(pmc);
-	RTE_SET_USED(tsc_timestamp);
-	RTE_SET_USED(lck);
-
-	return -ENOTSUP;
-}
-
 /**
  * This function is not supported on ARM.
  */
diff --git a/lib/librte_eal/include/generic/rte_power_intrinsics.h b/lib/librte_eal/include/generic/rte_power_intrinsics.h
index 3ad53068d5..85343bc9eb 100644
--- a/lib/librte_eal/include/generic/rte_power_intrinsics.h
+++ b/lib/librte_eal/include/generic/rte_power_intrinsics.h
@@ -61,44 +61,6 @@ struct rte_power_monitor_cond {
 __rte_experimental
 int rte_power_monitor(const struct rte_power_monitor_cond *pmc,
 		const uint64_t tsc_timestamp);
-/**
- * @warning
- * @b EXPERIMENTAL: this API may change without prior notice
- *
- * Monitor specific address for changes. This will cause the CPU to enter an
- * architecture-defined optimized power state until either the specified
- * memory address is written to, a certain TSC timestamp is reached, or other
- * reasons cause the CPU to wake up.
- *
- * Additionally, an `expected` 64-bit value and 64-bit mask are provided. If
- * mask is non-zero, the current value pointed to by the `p` pointer will be
- * checked against the expected value, and if they match, the entering of
- * optimized power state may be aborted.
- *
- * This call will also lock a spinlock on entering sleep, and release it on
- * waking up the CPU.
- *
- * @warning It is responsibility of the user to check if this function is
- *   supported at runtime using `rte_cpu_get_intrinsics_support()` API call.
- *
- * @param pmc
- *   The monitoring condition structure.
- * @param tsc_timestamp
- *   Maximum TSC timestamp to wait for. Note that the wait behavior is
- *   architecture-dependent.
- * @param lck
- *   A spinlock that must be locked before entering the function, will be
- *   unlocked while the CPU is sleeping, and will be locked again once the CPU
- *   wakes up.
- *
- * @return
- *   0 on success
- *   -EINVAL on invalid parameters
- *   -ENOTSUP if unsupported
- */
-__rte_experimental
-int rte_power_monitor_sync(const struct rte_power_monitor_cond *pmc,
-		const uint64_t tsc_timestamp, rte_spinlock_t *lck);
 
 /**
  * @warning
diff --git a/lib/librte_eal/ppc/rte_power_intrinsics.c b/lib/librte_eal/ppc/rte_power_intrinsics.c
index 5e5a1fff5a..f7862ea324 100644
--- a/lib/librte_eal/ppc/rte_power_intrinsics.c
+++ b/lib/librte_eal/ppc/rte_power_intrinsics.c
@@ -17,20 +17,6 @@ rte_power_monitor(const struct rte_power_monitor_cond *pmc,
 	return -ENOTSUP;
 }
 
-/**
- * This function is not supported on PPC64.
- */
-int
-rte_power_monitor_sync(const struct rte_power_monitor_cond *pmc,
-		const uint64_t tsc_timestamp, rte_spinlock_t *lck)
-{
-	RTE_SET_USED(pmc);
-	RTE_SET_USED(tsc_timestamp);
-	RTE_SET_USED(lck);
-
-	return -ENOTSUP;
-}
-
 /**
  * This function is not supported on PPC64.
  */
diff --git a/lib/librte_eal/version.map b/lib/librte_eal/version.map
index 32eceb8869..1fcd1d3bed 100644
--- a/lib/librte_eal/version.map
+++ b/lib/librte_eal/version.map
@@ -406,7 +406,6 @@ EXPERIMENTAL {
 
 	# added in 21.02
 	rte_power_monitor;
-	rte_power_monitor_sync;
 	rte_power_pause;
 	rte_thread_tls_key_create;
 	rte_thread_tls_key_delete;
diff --git a/lib/librte_eal/x86/rte_power_intrinsics.c b/lib/librte_eal/x86/rte_power_intrinsics.c
index 6be5c8b9f1..29247d8638 100644
--- a/lib/librte_eal/x86/rte_power_intrinsics.c
+++ b/lib/librte_eal/x86/rte_power_intrinsics.c
@@ -90,60 +90,6 @@ rte_power_monitor(const struct rte_power_monitor_cond *pmc,
 	return 0;
 }
 
-/**
- * This function uses UMONITOR/UMWAIT instructions and will enter C0.2 state.
- * For more information about usage of these instructions, please refer to
- * Intel(R) 64 and IA-32 Architectures Software Developer's Manual.
- */
-int
-rte_power_monitor_sync(const struct rte_power_monitor_cond *pmc,
-		const uint64_t tsc_timestamp, rte_spinlock_t *lck)
-{
-	const uint32_t tsc_l = (uint32_t)tsc_timestamp;
-	const uint32_t tsc_h = (uint32_t)(tsc_timestamp >> 32);
-
-	/* prevent user from running this instruction if it's not supported */
-	if (!wait_supported)
-		return -ENOTSUP;
-
-	if (pmc == NULL || lck == NULL)
-		return -EINVAL;
-
-	if (__check_val_size(pmc->data_sz) < 0)
-		return -EINVAL;
-
-	/*
-	 * we're using raw byte codes for now as only the newest compiler
-	 * versions support this instruction natively.
-	 */
-
-	/* set address for UMONITOR */
-	asm volatile(".byte 0xf3, 0x0f, 0xae, 0xf7;"
-			:
-			: "D"(pmc->addr));
-
-	if (pmc->mask) {
-		const uint64_t cur_value = __get_umwait_val(
-				pmc->addr, pmc->data_sz);
-		const uint64_t masked = cur_value & pmc->mask;
-
-		/* if the masked value is already matching, abort */
-		if (masked == pmc->val)
-			return 0;
-	}
-	rte_spinlock_unlock(lck);
-
-	/* execute UMWAIT */
-	asm volatile(".byte 0xf2, 0x0f, 0xae, 0xf7;"
-			: /* ignore rflags */
-			: "D"(0), /* enter C0.2 */
-			  "a"(tsc_l), "d"(tsc_h));
-
-	rte_spinlock_lock(lck);
-
-	return 0;
-}
-
 /**
  * This function uses TPAUSE instruction  and will enter C0.2 state. For more
  * information about usage of this instruction, please refer to Intel(R) 64 and
-- 
2.25.1