From mboxrd@z Thu Jan 1 00:00:00 1970 From: Mikkel Hagen Date: Fri, 15 Mar 2013 17:17:09 -0400 Subject: [ath9k-devel] ath9k driver modifications In-Reply-To: References: <5141F945.4030106@iol.unh.edu> Message-ID: <51438FD5.2010807@iol.unh.edu> List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: ath9k-devel@lists.ath9k.org Thanks Adrian, I appreciate the quick response, we will look into the rate control layer and the mac80211 as well and see if we can get this working. Thanks! Mikkel Hagen Research and Development Data Center Bridging/FC/Wireless/SAS/SATA/OFA/iWARP Consortiums Phone:1-603-862-0701 Fax:1-603-862-4181 UNH-IOL 121 Technology Drive, Suite 2 Durham, NH 03824 Facebook Twitter On 03/15/2013 04:30 PM, Adrian Chadd wrote: > Hi, > > > On 14 March 2013 09:22, Mikkel Hagen > wrote: > > Hello, > I work with the UNH-IOL to test conformance of 11n MAC, we > have been trying to implement our test suite over an atheros 11n > card. We have most of the test suite working except for two > issues that are preventing us finishing the implementation: > 1. turning off retries > 2. setting a hard rate on transmit > > > We tried to use iwconfig to set retry and rates but it seems to > ignore those settings, we then tried to use the radiotap header to > no success, we then tried to start modifying the atheros drivers > and still did not meet with much success. We are using lorcon > over the mac80211 driver for injection, with the ath9k driver. > Right now we have been modifying the driver in the 3.5 kernel, > but we can use any version that you recommend. > > An example of something that we have already tried to not transmit > retries is below, from xmit.c, line 316: > > hdr->frame_control |= cpu_to_le16(IEEE80211_FCTL_RETRY); > > to > > hdr->frame_control |= cpu_to_le16(0x0000); > > To try and force it not to set the retry bit, but this did not > seem to do anything. Do you have any pointers on what we might > try next? Thanks! > > > > That only sets the retry bit on outgoing frames, but the driver and > mac80211 will do something different. > > You need to find a way to tell mac80211 and the rate control layer to > set the retry count to 1. > > The problem is that mac80211/ath9k will do software retransmissions > too, so you may have to extend it to have some way to say "don't > software retransmit this frame either please." Felix would know better > about this. > > Thanks, > > > > Adrian > -------------- next part -------------- An HTML attachment was scrubbed... URL: http://lists.ath9k.org/pipermail/ath9k-devel/attachments/20130315/50fff6a2/attachment-0001.htm -------------- next part -------------- A non-text attachment was scrubbed... Name: FBIcon.png Type: image/png Size: 10425 bytes Desc: not available Url : http://lists.ath9k.org/pipermail/ath9k-devel/attachments/20130315/50fff6a2/attachment-0002.png -------------- next part -------------- A non-text attachment was scrubbed... Name: Twitter-Icon.png Type: image/png Size: 12064 bytes Desc: not available Url : http://lists.ath9k.org/pipermail/ath9k-devel/attachments/20130315/50fff6a2/attachment-0003.png