All of lore.kernel.org
 help / color / mirror / Atom feed
From: Paolo Bonzini <pbonzini@redhat.com>
To: Dima Stepanov <dimastep@yandex-team.ru>, qemu-devel@nongnu.org
Cc: wrfsh@yandex-team.ru
Subject: Re: [Qemu-devel] [PATCH v1] qemu-pr-helper: garbage response structure can be used to write data
Date: Mon, 2 Jul 2018 14:21:41 +0200	[thread overview]
Message-ID: <5149995f-2bb2-cbe8-1a2c-e16ed0ee3cd6@redhat.com> (raw)
In-Reply-To: <20180702085207.GA6032@dimastep-nix>

On 02/07/2018 10:52, Dima Stepanov wrote:
> Ping.
> 
> On Fri, Jun 15, 2018 at 12:11:44PM +0300, Dima Stepanov wrote:
>> The prh_co_entry() routine handles requests. The first part is to read a
>> request by calling the prh_read_request() routine, if:
>>   1. scsi_cdb_xfer(req->cdb) call returns 0, and
>>   2. req->cdb[0] == PERSISTENT_RESERVE_IN, then
>> The resp->result field will be uninitialized. As a result the resp.sz
>> field will be also uninitialized in the prh_co_entry() function.
>> The second part is to send the response by calling the
>> prh_write_response() routine:
>>   1. For the PERSISTENT_RESERVE_IN command, and
>>   2. resp->result == GOOD (previous successful reply or just luck), then
>> There is a probability that the following assert will not be trigered:
>>   assert(resp->sz <= req->sz && resp->sz <= sizeof(client->data));
>> As a result some uninitialized response will be sent.
>>
>> The fix is to initialize the response structure to CHECK_CONDITION and 0
>> values before calling the prh_read_request() routine.

The actual bug is that the "if (sz > 0)" should apply only to 
PERSISTENT_RESERVE_OUT, and in fact it can be done in do_pr_out.  
PERSISTENT_RESERVE_IN with sz == 0 is weird but okay.

This simplifies the code a bit too, because we can handle closing the 
file descriptor in prh_co_entry.

Does something like this work for you?

diff --git a/scsi/qemu-pr-helper.c b/scsi/qemu-pr-helper.c
index 0218d65bbf..c89a446a45 100644
--- a/scsi/qemu-pr-helper.c
+++ b/scsi/qemu-pr-helper.c
@@ -455,6 +455,14 @@ static int multipath_pr_out(int fd, const uint8_t *cdb, uint8_t *sense,
     char transportids[PR_HELPER_DATA_SIZE];
     int r;
 
+    if (sz < PR_OUT_FIXED_PARAM_SIZE) {
+        /* Illegal request, Parameter list length error.  This isn't fatal;
+         * we have read the data, send an error without closing the socket.
+         */
+        scsi_build_sense(sense, SENSE_CODE(INVALID_PARAM_LEN));
+        return CHECK_CONDITION;
+    }
+
     switch (rq_servact) {
     case MPATH_PROUT_REG_SA:
     case MPATH_PROUT_RES_SA:
@@ -574,6 +582,12 @@ static int do_pr_out(int fd, const uint8_t *cdb, uint8_t *sense,
                      const uint8_t *param, int sz)
 {
     int resp_sz;
+
+    if ((fcntl(fd, F_GETFL) & O_ACCMODE) == O_RDONLY) {
+        scsi_build_sense(sense, SENSE_CODE(INVALID_OPCODE));
+        return CHECK_CONDITION;
+    }
+
 #ifdef CONFIG_MPATH
     if (is_mpath(fd)) {
         return multipath_pr_out(fd, cdb, sense, param, sz);
@@ -690,21 +704,6 @@ static int coroutine_fn prh_read_request(PRHelperClient *client,
                                  errp) < 0) {
             goto out_close;
         }
-        if ((fcntl(client->fd, F_GETFL) & O_ACCMODE) == O_RDONLY) {
-            scsi_build_sense(resp->sense, SENSE_CODE(INVALID_OPCODE));
-            sz = 0;
-        } else if (sz < PR_OUT_FIXED_PARAM_SIZE) {
-            /* Illegal request, Parameter list length error.  This isn't fatal;
-             * we have read the data, send an error without closing the socket.
-             */
-            scsi_build_sense(resp->sense, SENSE_CODE(INVALID_PARAM_LEN));
-            sz = 0;
-        }
-        if (sz == 0) {
-            resp->result = CHECK_CONDITION;
-            close(client->fd);
-            client->fd = -1;
-        }
     }
 
     req->fd = client->fd;
@@ -785,25 +784,23 @@ static void coroutine_fn prh_co_entry(void *opaque)
             break;
         }
 
-        if (sz > 0) {
-            num_active_sockets++;
-            if (req.cdb[0] == PERSISTENT_RESERVE_OUT) {
-                r = do_pr_out(req.fd, req.cdb, resp.sense,
-                              client->data, sz);
-                resp.sz = 0;
-            } else {
-                resp.sz = sizeof(client->data);
-                r = do_pr_in(req.fd, req.cdb, resp.sense,
-                             client->data, &resp.sz);
-                resp.sz = MIN(resp.sz, sz);
-            }
-            num_active_sockets--;
-            close(req.fd);
-            if (r == -1) {
-                break;
-            }
-            resp.result = r;
+        num_active_sockets++;
+        if (req.cdb[0] == PERSISTENT_RESERVE_OUT) {
+            r = do_pr_out(req.fd, req.cdb, resp.sense,
+                          client->data, sz);
+            resp.sz = 0;
+        } else {
+            resp.sz = sizeof(client->data);
+            r = do_pr_in(req.fd, req.cdb, resp.sense,
+                         client->data, &resp.sz);
+            resp.sz = MIN(resp.sz, sz);
+        }
+        num_active_sockets--;
+        close(req.fd);
+        if (r == -1) {
+            break;
         }
+        resp.result = r;
 
         if (prh_write_response(client, &req, &resp, &local_err) < 0) {
             break;

  reply	other threads:[~2018-07-02 12:21 UTC|newest]

Thread overview: 6+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2018-06-15  9:11 [Qemu-devel] [PATCH v1] qemu-pr-helper: garbage response structure can be used to write data Dima Stepanov
2018-07-02  8:52 ` Dima Stepanov
2018-07-02 12:21   ` Paolo Bonzini [this message]
2018-07-03  9:27     ` Dima Stepanov
2018-07-03  9:35       ` Paolo Bonzini
2018-07-02 10:38 ` Stefan Hajnoczi

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=5149995f-2bb2-cbe8-1a2c-e16ed0ee3cd6@redhat.com \
    --to=pbonzini@redhat.com \
    --cc=dimastep@yandex-team.ru \
    --cc=qemu-devel@nongnu.org \
    --cc=wrfsh@yandex-team.ru \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.