From: "Alfredo Jesús Delaiti" <alfredodelaiti@netscape.net>
To: Mauro Carvalho Chehab <mchehab@redhat.com>
Cc: linux-media@vger.kernel.org
Subject: Re: mb86a20s and cx23885
Date: Mon, 01 Apr 2013 19:41:07 -0300 [thread overview]
Message-ID: <515A0D03.7040802@netscape.net> (raw)
In-Reply-To: <513A6968.4070803@netscape.net>
Hi all
After analyzing 15 samples (took me many days),I obtained the table
underneath.
{ 0x70, 0x0f },
{ 0x70, 0xff },
{ 0x09, 0x3a },
{ 0x50, 0xd1 }, { 0x51, 0x22 },
{ 0x39, 0x00 },
{ 0x28, 0x2a }, { 0x29, 0x00 }, { 0x2a, 0xfd }, { 0x2b, 0xc8 },
{ 0x3b, 0x21 },
{ 0x3c, 0x38 },
{ 0x28, 0x20 }, { 0x29, 0x3e }, { 0x2a, 0xde }, { 0x2b, 0x4d },
{ 0x28, 0x22 }, { 0x29, 0x00 }, { 0x2a, 0x1f }, { 0x2b, 0xf0 },
{ 0x01, 0x0d },
{ 0x04, 0x08 }, { 0x05, 0x03 },
{ 0x04, 0x0e }, { 0x05, 0x00 },
{ 0x04, 0x0f }, { 0x05, 0x32 },
{ 0x04, 0x0b }, { 0x05, 0x78 },
{ 0x04, 0x00 }, { 0x05, 0x00 },
{ 0x04, 0x01 }, { 0x05, 0x1e },
{ 0x04, 0x02 }, { 0x05, 0x07 },
{ 0x04, 0x03 }, { 0x05, 0xd0 },
{ 0x04, 0x09 }, { 0x05, 0x00 },
{ 0x04, 0x0a }, { 0x05, 0xff },
{ 0x04, 0x27 }, { 0x05, 0x00 },
{ 0x04, 0x28 }, { 0x05, 0x00 },
{ 0x04, 0x1e }, { 0x05, 0x00 },
{ 0x04, 0x29 }, { 0x05, 0x64 },
{ 0x04, 0x32 }, { 0x05, 0x64 },
{ 0x04, 0x14 }, { 0x05, 0x02 },
{ 0x04, 0x04 }, { 0x05, 0x00 },
{ 0x04, 0x05 }, { 0x05, 0x22 },
{ 0x04, 0x06 }, { 0x05, 0x0e },
{ 0x04, 0x07 }, { 0x05, 0xd8 },
{ 0x04, 0x12 }, { 0x05, 0x00 },
{ 0x04, 0x13 }, { 0x05, 0xff },
{ 0x52, 0x01 },
{ 0x50, 0xa7 }, { 0x51, 0x00 },
{ 0x50, 0xa8 }, { 0x51, 0xff },
{ 0x50, 0xa9 }, { 0x51, 0xff },
{ 0x50, 0xaa }, { 0x51, 0x00 },
{ 0x50, 0xab }, { 0x51, 0xff },
{ 0x50, 0xac }, { 0x51, 0xff },
{ 0x50, 0xad }, { 0x51, 0x00 },
{ 0x50, 0xae }, { 0x51, 0xff },
{ 0x50, 0xaf }, { 0x51, 0xff },
{ 0x5e, 0x07 },
{ 0x50, 0xdc }, { 0x51, 0x3f },
{ 0x50, 0xdd }, { 0x51, 0xff },
{ 0x50, 0xde }, { 0x51, 0x3f },
{ 0x50, 0xdf }, { 0x51, 0xff },
{ 0x50, 0xe0 }, { 0x51, 0x3f },
{ 0x50, 0xe1 }, { 0x51, 0xff },
{ 0x50, 0xb0 }, { 0x51, 0x07 },
{ 0x50, 0xb2 }, { 0x51, 0x3f },
{ 0x50, 0xb3 }, { 0x51, 0xff },
{ 0x50, 0xb4 }, { 0x51, 0x3f },
{ 0x50, 0xb5 }, { 0x51, 0xff },
{ 0x50, 0xb6 }, { 0x51, 0x3f },
{ 0x50, 0xb7 }, { 0x51, 0xff },
{ 0x50, 0x51 }, { 0x51, 0x04 },
{ 0x50, 0x50 }, { 0x51, 0x02 },
{ 0x45, 0x04 },
{ 0x48, 0x04 },
{ 0x50, 0xd5 }, { 0x51, 0x00 },
{ 0x50, 0xd6 }, { 0x51, 0x1f },
{ 0x50, 0xd2 }, { 0x51, 0x03 },
{ 0x50, 0xd7 }, { 0x51, 0x3f },
{ 0x28, 0x74 }, { 0x29, 0x00 }, { 0x2a, 0x00 }, { 0x2b, 0xff },
{ 0x28, 0x46 }, { 0x29, 0x00 }, { 0x2a, 0x1a }, { 0x2b, 0x0c },
{ 0x04, 0x40 }, { 0x05, 0x00 },
{ 0x28, 0x00 }, { 0x2b, 0x08 },
{ 0x28, 0x05 }, { 0x2b, 0x00 },
{ 0x1c, 0x01 },
{ 0x28, 0x06 }, { 0x29, 0x00 }, { 0x2a, 0x00 }, { 0x2b, 0x1f },
{ 0x28, 0x07 }, { 0x29, 0x00 }, { 0x2a, 0x00 }, { 0x2b, 0x18 },
{ 0x28, 0x08 }, { 0x29, 0x00 }, { 0x2a, 0x00 }, { 0x2b, 0x12 },
{ 0x28, 0x09 }, { 0x29, 0x00 }, { 0x2a, 0x00 }, { 0x2b, 0x30 },
{ 0x28, 0x0a }, { 0x29, 0x00 }, { 0x2a, 0x00 }, { 0x2b, 0x37 },
{ 0x28, 0x0b }, { 0x29, 0x00 }, { 0x2a, 0x00 }, { 0x2b, 0x02 },
{ 0x28, 0x0c }, { 0x29, 0x00 }, { 0x2a, 0x00 }, { 0x2b, 0x09 },
{ 0x28, 0x0d }, { 0x29, 0x00 }, { 0x2a, 0x00 }, { 0x2b, 0x06 },
{ 0x28, 0x0e }, { 0x29, 0x00 }, { 0x2a, 0x00 }, { 0x2b, 0x7b },
{ 0x28, 0x0f }, { 0x29, 0x00 }, { 0x2a, 0x00 }, { 0x2b, 0x76 },
{ 0x28, 0x10 }, { 0x29, 0x00 }, { 0x2a, 0x00 }, { 0x2b, 0x7d },
{ 0x28, 0x11 }, { 0x29, 0x00 }, { 0x2a, 0x00 }, { 0x2b, 0x08 },
{ 0x28, 0x12 }, { 0x29, 0x00 }, { 0x2a, 0x00 }, { 0x2b, 0x0b },
{ 0x28, 0x13 }, { 0x29, 0x00 }, { 0x2a, 0x00 }, { 0x2b, 0x00 },
{ 0x28, 0x14 }, { 0x29, 0x00 }, { 0x2a, 0x01 }, { 0x2b, 0xf2 },
{ 0x28, 0x15 }, { 0x29, 0x00 }, { 0x2a, 0x01 }, { 0x2b, 0xf3 },
{ 0x28, 0x16 }, { 0x29, 0x00 }, { 0x2a, 0x00 }, { 0x2b, 0x05 },
{ 0x28, 0x17 }, { 0x29, 0x00 }, { 0x2a, 0x00 }, { 0x2b, 0x16 },
{ 0x28, 0x18 }, { 0x29, 0x00 }, { 0x2a, 0x00 }, { 0x2b, 0x0f },
{ 0x28, 0x19 }, { 0x29, 0x00 }, { 0x2a, 0x07 }, { 0x2b, 0xef },
{ 0x28, 0x1a }, { 0x29, 0x00 }, { 0x2a, 0x07 }, { 0x2b, 0xd8 },
{ 0x28, 0x1b }, { 0x29, 0x00 }, { 0x2a, 0x07 }, { 0x2b, 0xf1 },
{ 0x28, 0x1c }, { 0x29, 0x00 }, { 0x2a, 0x00 }, { 0x2b, 0x3d },
{ 0x28, 0x1d }, { 0x29, 0x00 }, { 0x2a, 0x00 }, { 0x2b, 0x94 },
{ 0x28, 0x1e }, { 0x29, 0x00 }, { 0x2a, 0x00 }, { 0x2b, 0xba },
{ 0x50, 0x1e }, { 0x51, 0x5d },
{ 0x50, 0x22 }, { 0x51, 0x00 },
{ 0x50, 0x23 }, { 0x51, 0xc8 },
{ 0x50, 0x24 }, { 0x51, 0x00 },
{ 0x50, 0x25 }, { 0x51, 0xf0 },
{ 0x50, 0x26 }, { 0x51, 0x00 },
{ 0x50, 0x27 }, { 0x51, 0xc3 },
{ 0x50, 0x39 }, { 0x51, 0x02 },
It has very few changes from the one that comes with the controller, but
when trying to use it I get the following:
{ 0x70, 0x0f },
{ 0x70, 0xff },
{ 0x09, 0x3a },
{ 0x50, 0xd1 }, { 0x51, 0x22 },
{ 0x09, 0x3e }, /* This line is inserted alone. Initialize
the frontend? */
{ 0x39, 0x01 }, /* This line is inserted alone. Initialize
the frontend? */
{ 0x71, 0x00 }, /* This line is inserted alone. Initialize
the frontend? */
{ 0x28, 0x2a }, { 0x29, 0x5a }, { 0x2a, 0x6c }, { 0x2b, 0x63 },
/* This line is inserted alone. Adjust IF frequency to match tuner? */
{ 0x28, 0x20 }, { 0x29, 0x33 }, { 0x2a, 0xdf }, { 0x2b, 0xa9 },
/* This line is inserted alone. Adjust IF frequency to match tuner? */
{ 0x50, 0xd5 }, { 0x51, 0x00 }, /* This line is inserted
alone. Adjust IF frequency to match tuner? */
{ 0x39, 0x00 },
{ 0x28, 0x2a }, { 0x29, 0x00 }, { 0x2a, 0xfd }, { 0x2b, 0xc8 },
{ 0x3b, 0x21 },
{ 0x3c, 0x38 },
{ 0x28, 0x20 }, { 0x29, 0x3e }, { 0x2a, 0xde }, { 0x2b, 0x4d },
{ 0x28, 0x22 }, { 0x29, 0x00 }, { 0x2a, 0x1f }, { 0x2b, 0xf0 },
...
For the rest I get the same thing on Windows. I have commented the line
that added "alone".
I get the following with dvbv5:
alfredo@dhcppc4:~> dvbv5-zap -I zap -c ~/channels.conf "Encuentro"
using demux '/dev/dvb/adapter0/demux0'
reading channels from file '/home/alfredo/channels.conf'
CODE_RATE_HP (36) command not found during store
CODE_RATE_LP (37) command not found during store
MODULATION (4) command not found during store
HIERARCHY (40) command not found during store
tuning to 521142857 Hz
video pid 272
audio pid 273
status 01 | signal 0000 | snr ffff | ber 00000000 | unc 0000ffff |
status 01 | signal 0000 | snr ffff | ber 00000000 | unc 0000ffff |
status 01 | signal 0000 | snr ffff | ber 00000000 | unc 0000ffff |
Wath means: CODE_RATE_HP (36) command not found during store;
CODE_RATE_LP (37) command not found during store; MODULATION (4) command
not found during store; HIERARCHY (40) command not found during store?
Any suggestions,
Thanks,
Alfredo
next prev parent reply other threads:[~2013-04-01 22:46 UTC|newest]
Thread overview: 29+ messages / expand[flat|nested] mbox.gz Atom feed top
[not found] <51054759.7050202@netscape.net>
2013-01-27 16:16 ` mb86a20s and cx23885 Mauro Carvalho Chehab
2013-01-27 21:48 ` Alfredo Jesús Delaiti
2013-01-27 21:52 ` Fwd: " Alfredo Jesús Delaiti
2013-01-28 10:23 ` Mauro Carvalho Chehab
2013-01-28 20:47 ` Alfredo Jesús Delaiti
2013-02-06 14:12 ` Alfredo Jesús Delaiti
2013-03-03 14:50 ` Alfredo Jesús Delaiti
2013-03-03 16:15 ` Mauro Carvalho Chehab
2013-03-04 23:09 ` Alfredo Jesús Delaiti
2013-03-03 16:40 ` Mauro Carvalho Chehab
2013-03-04 19:42 ` Mauro Carvalho Chehab
2013-03-05 0:00 ` Alfredo Jesús Delaiti
2013-03-05 2:30 ` Mauro Carvalho Chehab
2013-03-08 22:42 ` Alfredo Jesús Delaiti
2013-04-01 22:41 ` Alfredo Jesús Delaiti [this message]
2013-07-15 19:30 ` Alfredo Jesús Delaiti
2013-07-15 20:30 ` Mauro Carvalho Chehab
2013-07-17 13:54 ` Alfredo Jesús Delaiti
2013-07-17 19:23 ` Mauro Carvalho Chehab
2013-07-19 3:38 ` Alfredo Jesús Delaiti
2013-07-21 13:50 ` Alfredo Jesús Delaiti
2013-07-23 20:58 ` Alfredo Jesús Delaiti
2013-07-23 21:46 ` Alfredo Jesús Delaiti
2013-07-27 17:55 ` Alfredo Jesús Delaiti
[not found] ` <20130801090436.6dfa0f68@infradead.org>
2013-08-01 17:16 ` Alfredo Jesús Delaiti
2013-08-01 17:37 ` Mauro Carvalho Chehab
2013-08-01 18:09 ` Alfredo Jesús Delaiti
2013-08-01 18:48 ` Mauro Carvalho Chehab
2013-08-02 3:18 ` Alfredo Jesús Delaiti
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=515A0D03.7040802@netscape.net \
--to=alfredodelaiti@netscape.net \
--cc=linux-media@vger.kernel.org \
--cc=mchehab@redhat.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.