All of lore.kernel.org
 help / color / mirror / Atom feed
From: Lars-Peter Clausen <lars@metafoo.de>
To: padma.v@samsung.com
Cc: Vinod Koul <vinod.koul@intel.com>, Dan Williams <djbw@fb.com>,
	Jon Hunter <jon-hunter@ti.com>,
	"linux-kernel@vger.kernel.org" <linux-kernel@vger.kernel.org>
Subject: Re: [PATCH 2/2] dma: pl330: Use the generic of_dma_xlate_by_chan_id
Date: Tue, 02 Apr 2013 12:44:36 +0200	[thread overview]
Message-ID: <515AB694.7090403@metafoo.de> (raw)
In-Reply-To: <26789240.182151364893959039.JavaMail.weblogic@epv6ml02>

On 04/02/2013 11:12 AM, PADMAVATHI VENNA wrote:
> Hi Lars,
> 
> ------- Original Message -------
> Sender : Lars-Peter Clausen<lars@metafoo.de>
> Date : Apr 02, 2013 16:33 (GMT+09:00)
> Title : Re: [PATCH 2/2] dma: pl330: Use the generic of_dma_xlate_by_chan_id
> 
> On 04/02/2013 08:27 AM, PADMAVATHI VENNA wrote:
>>
>> Hi,
>> ------- Original Message -------
>> Sender : Lars-Peter Clausen
>> Date : Mar 25, 2013 22:16 (GMT+09:00)
>> Title : [PATCH 2/2] dma: pl330: Use the generic of_dma_xlate_by_chan_id
>>
>> Use the generic of_dma_xlate_by_chan_id xlate callback instead of a custom
>> implementation.
>>
>> There is one minor difference between the generic of_dma_xlate_by_chan_id
>> function and the pl330 specific one. of_dma_xlate_by_chan_id only sets the
>> DMA_SLAVE capability for the channel capability mask, while the pl330 driver
>> additionally sets the DMA_CYCLIC capability. But since all pl330 channels which
>> have the DMA_SLAVE capability set also have DMA_CYCLIC capability set both
>> functions will have the same result.
>>
>> I am not clear about the dma capabilities. Is it mentioned some where that if we set DMA_SLAVE capability
>> will that also set DMA_CYCLIC capability?
>>
> 
> Well DMA_SLAVE won't automatically set DMA_CYCLIC. But the driver sets both.
> 
> I tested your patches, it's woking for audio. But I need some clarification related to capabilities.
> As per my understanding, controller driver registers the available capabilities in the probe and 
> client drivers requests for a particular capability. In both the cases, in the dmaengine it checks
> if the requested capability is satisfied.
> If we don't set the DMA_CYCLIC, how __dma_device_satisfies_mask works?
> 
>  Please correct me if I am wrong.
> 
> Thanks
> Padma

Hi,

Well, DMA_SLAVE | DMA_CYCLIC is a more restrictive mask than DMA_SLAVE. So
any channel that matches DMA_SLAVE | DMA_CYCLIC will also match DMA_SLAVE.

- Lars

> - Lars
> 
>> Signed-off-by: Lars-Peter Clausen 
>> ---
>> drivers/dma/pl330.c | 41 +----------------------------------------
>> 1 file changed, 1 insertion(+), 40 deletions(-)
>>
>> diff --git a/drivers/dma/pl330.c b/drivers/dma/pl330.c
>> index 345e2a1..ea48de7 100644
>> --- a/drivers/dma/pl330.c
>> +++ b/drivers/dma/pl330.c
>> @@ -608,11 +608,6 @@ struct dma_pl330_desc {
>> struct dma_pl330_chan *pchan;
>> };
>>
>> -struct dma_pl330_filter_args {
>> - struct dma_pl330_dmac *pdmac;
>> - unsigned int chan_id;
>> -};
>> -
>> static inline void _callback(struct pl330_req *r, enum pl330_op_err err)
>> {
>> if (r && r->xfer_cb)
>> @@ -2358,16 +2353,6 @@ static void dma_pl330_rqcb(void *token, enum pl330_op_err err)
>> tasklet_schedule(&pch->task);
>> }
>>
>> -static bool pl330_dt_filter(struct dma_chan *chan, void *param)
>> -{
>> - struct dma_pl330_filter_args *fargs = param;
>> -
>> - if (chan->device != &fargs->pdmac->ddma)
>> - return false;
>> -
>> - return (chan->chan_id == fargs->chan_id);
>> -}
>> -
>> bool pl330_filter(struct dma_chan *chan, void *param)
>> {
>> u8 *peri_id;
>> @@ -2380,30 +2365,6 @@ bool pl330_filter(struct dma_chan *chan, void *param)
>> }
>> EXPORT_SYMBOL(pl330_filter);
>>
>> -static struct dma_chan *of_dma_pl330_xlate(struct of_phandle_args *dma_spec,
>> - struct of_dma *ofdma)
>> -{
>> - int count = dma_spec->args_count;
>> - struct dma_pl330_dmac *pdmac = ofdma->of_dma_data;
>> - struct dma_pl330_filter_args fargs;
>> - dma_cap_mask_t cap;
>> -
>> - if (!pdmac)
>> - return NULL;
>> -
>> - if (count != 1)
>> - return NULL;
>> -
>> - fargs.pdmac = pdmac;
>> - fargs.chan_id = dma_spec->args[0];
>> -
>> - dma_cap_zero(cap);
>> - dma_cap_set(DMA_SLAVE, cap);
>> - dma_cap_set(DMA_CYCLIC, cap);
>> -
>> - return dma_request_channel(cap, pl330_dt_filter, &fargs);
>> -}
>> -
>> static int pl330_alloc_chan_resources(struct dma_chan *chan)
>> {
>> struct dma_pl330_chan *pch = to_pchan(chan);
>> @@ -2996,7 +2957,7 @@ pl330_probe(struct amba_device *adev, const struct amba_id *id)
>> pi->pcfg.num_peri, pi->pcfg.num_events);
>>
>> ret = of_dma_controller_register(adev->dev.of_node,
>> - of_dma_pl330_xlate, pdmac);
>> + of_dma_xlate_by_chan_id, pd);
>> if (ret) {
>> dev_err(&adev->dev,
>> "unable to register DMA to the generic DT DMA helpers\n");


  reply	other threads:[~2013-04-02  9:45 UTC|newest]

Thread overview: 6+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2013-04-02  9:12 Re: [PATCH 2/2] dma: pl330: Use the generic of_dma_xlate_by_chan_id PADMAVATHI VENNA
2013-04-02 10:44 ` Lars-Peter Clausen [this message]
2013-04-02 17:33   ` Vinod Koul
  -- strict thread matches above, loose matches on Subject: below --
2013-04-02  6:27 PADMAVATHI VENNA
2013-04-02  7:33 ` Lars-Peter Clausen
2013-03-25 13:16 [PATCH 1/2] dma: of: Add generic xlate function for matching by channel id Lars-Peter Clausen
2013-03-25 13:16 ` [PATCH 2/2] dma: pl330: Use the generic of_dma_xlate_by_chan_id Lars-Peter Clausen

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=515AB694.7090403@metafoo.de \
    --to=lars@metafoo.de \
    --cc=djbw@fb.com \
    --cc=jon-hunter@ti.com \
    --cc=linux-kernel@vger.kernel.org \
    --cc=padma.v@samsung.com \
    --cc=vinod.koul@intel.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.