From mboxrd@z Thu Jan 1 00:00:00 1970 From: Stefano Babic Date: Thu, 04 Apr 2013 10:31:56 +0200 Subject: [U-Boot] [PULL] : Please pull u-boot-imx Message-ID: <515D3A7C.3030707@denx.de> List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: u-boot@lists.denx.de Hi Albert, last iMX fixes for the release. Please pull from u-boot-imx, thanks. The following changes since commit b27673ccbd3d5435319b5c09c3e7061f559f925d: Merge branch 'u-boot-tegra/master' into 'u-boot-arm/master' (2013-03-15 20:50:43 +0100) are available in the git repository at: git://www.denx.de/git/u-boot-imx.git master for you to fetch changes up to d36b39bf0d1dbe4ef03f7fc1f20b2e52eb90acf5: spi: mxc_spi: Fix ECSPI reset handling (2013-04-04 10:23:09 +0200) ---------------------------------------------------------------- Abbas Raza (1): mmc: i.MX6: fsl_esdhc: Define maximum bus width supported by a board Alexandre Pereira da Silva (1): mx23_olinuxino: Fix netboot console Beno?t Th?baudeau (1): mx25pdk: Enable imxdi RTC Dirk Behme (1): spi: mxc_spi: Fix ECSPI reset handling Eric Nelson (2): i.MX6: Add hdmidet command to detect attached HDMI monitor i.MX6: mx6qsabrelite: discard override of CONFIG_ARP_TIMEOUT Fabio Estevam (10): mxs: spl_mem_init: Align DDR2 init with FSL bootlets source configs: mx28evk: Use single-line comments mx28evk: Disable CONFIG_CMD_I2C Add initial support for Wandboard dual lite and solo. mx28evk: Introduce a new target for saving env vars to NAND mx6qsabrelite: README: No need to pass 'u-boot.imx' mx6: Fix get_board_rev() for the mx6 solo case wandboard: Remove duplicate 'mmc dev' mx6qsabrelite: Remove duplicate 'mmc dev' wandboard: Remove CONFIG_SYS_FSL_USDHC_NUM Javier Martinez Canillas (1): i.MX6: mx6qsabrelite: README: don't pass chip-select to sf probe command Knut Wohlrab (1): imx-common: timer: fix 32-bit overflow Otavio Salvador (4): mx6qsabresd: Document the mapping of USDHC[2-4] mx6qsabresd: Fix card detection for invalid card id case mx6qsabre{sd,auto}: Add boot mode select mx23_olinuxino: Change definitions to use spaces instead of tabs MAINTAINERS | 1 + arch/arm/cpu/arm926ejs/mxs/spl_mem_init.c | 18 +-- arch/arm/cpu/armv7/mx6/soc.c | 12 ++ arch/arm/imx-common/Makefile | 1 + arch/arm/imx-common/cmd_hdmidet.c | 37 +++++ arch/arm/imx-common/timer.c | 26 +-- arch/arm/include/asm/arch-mx6/mx6dl_pins.h | 3 + board/boundary/nitrogen6x/nitrogen6x.c | 8 +- board/freescale/mx6qsabreauto/mx6qsabreauto.c | 18 +++ board/freescale/mx6qsabrelite/README | 4 +- board/freescale/mx6qsabrelite/mx6qsabrelite.c | 8 +- board/freescale/mx6qsabresd/mx6qsabresd.c | 48 ++++-- board/wandboard/Makefile | 29 ++++ board/wandboard/README | 40 +++++ board/wandboard/wandboard.c | 178 +++++++++++++++++++++ boards.cfg | 5 +- doc/README.mx28evk | 18 +++ drivers/mmc/fsl_esdhc.c | 7 + drivers/spi/mxc_spi.c | 8 +- include/configs/mx23_olinuxino.h | 162 +++++++++---------- include/configs/mx25pdk.h | 4 + include/configs/mx28evk.h | 92 ++++++----- include/configs/mx6qsabre_common.h | 2 + include/configs/mx6qsabrelite.h | 3 - include/configs/wandboard.h | 209 +++++++++++++++++++++++++ include/fsl_esdhc.h | 1 + 26 files changed, 757 insertions(+), 185 deletions(-) create mode 100644 arch/arm/imx-common/cmd_hdmidet.c create mode 100644 board/wandboard/Makefile create mode 100644 board/wandboard/README create mode 100644 board/wandboard/wandboard.c create mode 100644 include/configs/wandboard.h -- ===================================================================== DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany Phone: +49-8142-66989-53 Fax: +49-8142-66989-80 Email: sbabic at denx.de =====================================================================