All of lore.kernel.org
 help / color / mirror / Atom feed
From: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>
To: Jongsung Kim <neidhard.kim@lge.com>
Cc: davem@davemloft.net, peppe.cavallaro@st.com,
	chohnstaedt@innominate.com, netdev@vger.kernel.org,
	linux-kernel@vger.kernel.org
Subject: Re: net: phy: realtek: add rtl8201f driver
Date: Wed, 08 May 2013 19:43:00 +0400	[thread overview]
Message-ID: <518A7284.4000504@cogentembedded.com> (raw)
In-Reply-To: <201305081910.27203.neidhard.kim@lge.com>

Hello.

On 08-05-2013 14:10, Jongsung Kim wrote:

> This patch adds the minimal driver to manage the
> Realtek RTL8201F 10/100Mbps Transceivers.

> Signed-off-by: Jongsung Kim <neidhard.kim@lge.com>
> ---
>   drivers/net/phy/realtek.c |   60 +++++++++++++++++++++++++++++++++++++++-----
>   1 files changed, 53 insertions(+), 7 deletions(-)

> diff --git a/drivers/net/phy/realtek.c b/drivers/net/phy/realtek.c
> index 8e7af83..27847ca 100644
> --- a/drivers/net/phy/realtek.c
> +++ b/drivers/net/phy/realtek.c
> @@ -16,9 +16,13 @@
>   #include <linux/phy.h>
>   #include <linux/module.h>
>
> -#define RTL821x_PHYSR		0x11
> -#define RTL821x_PHYSR_DUPLEX	0x2000
> -#define RTL821x_PHYSR_SPEED	0xc000

     Removal of unused #define's is a matter of a separate cleanup patch...

> +/* page 0 register 30 - interrupt indicators and SNR display register */
> +#define RTL8201F_ISR		0x1e
> +/* page 0 register 31 - page select register */
> +#define RTL8201F_PSR		0x1f
> +/* page 7 register 19 - interrupt, WOL enable, and LEDs function register */
> +#define RTL8201F_IER		0x13
> +
>   #define RTL821x_INER		0x12
>   #define RTL821x_INER_INIT	0x6400
>   #define RTL821x_INSR		0x13
> @@ -29,6 +33,15 @@ MODULE_DESCRIPTION("Realtek PHY driver");
>   MODULE_AUTHOR("Johnson Leung");
>   MODULE_LICENSE("GPL");
>
> +static int rtl8201f_ack_interrupt(struct phy_device *phydev)
> +{
> +	int err;
> +
> +	err = phy_read(phydev, RTL8201F_ISR);

    This could be an initializer and so make the function shorter.

> +
> +	return (err < 0) ? err : 0;
> +}
> +
>   static int rtl821x_ack_interrupt(struct phy_device *phydev)
>   {
>   	int err;
[...]
> @@ -96,16 +141,16 @@ static struct phy_driver rtl8211e_driver = {
>
>   static int __init realtek_init(void)
>   {
> -	int ret;
> -
> -	ret = phy_driver_register(&rtl8211b_driver);
> -	if (ret < 0)
> +	if(phy_driver_register(&rtl8201f_driver) < 0)
> +		return -ENODEV;
> +	if(phy_driver_register(&rtl8211b_driver) < 0)

     You haven't run this patch thru scripts/checkpatch.pl -- there 
should be a space between *if* and (.

WBR, Sergei


  parent reply	other threads:[~2013-05-08 15:43 UTC|newest]

Thread overview: 17+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2013-05-08 10:10 net: phy: realtek: add rtl8201f driver Jongsung Kim
2013-05-08 10:41 ` Francois Romieu
2013-05-09  2:26   ` Jongsung Kim
2013-05-08 15:43 ` Sergei Shtylyov [this message]
2013-05-09  2:35   ` Jongsung Kim
2013-05-09 16:58     ` Sergei Shtylyov
2013-05-10  3:44       ` Jongsung Kim
2013-05-10  7:29 ` [PATCH v2 1/4] net: phy: realtek: simplify multiple drivers registration Jongsung Kim
2013-05-10  7:29 ` [PATCH v2 2/4] net: phy: realtek: add support for the RTL8201F Jongsung Kim
2013-05-10  7:29 ` [PATCH v2 3/4] net: phy: realtek: add suspend/resume handlers for the RTL8211B Jongsung Kim
2013-05-10  7:29 ` [PATCH v2 4/4] net: phy: realtek: cleanup code Jongsung Kim
2013-05-10 11:18   ` Sergei Shtylyov
2013-05-13  2:48     ` Jongsung Kim
2013-05-13  9:58     ` [PATCH v3 1/4] net: phy: realtek: simplify multiple drivers registration Jongsung Kim
2013-05-13  9:58     ` [PATCH v3 2/4] net: phy: realtek: add support for the RTL8201F Jongsung Kim
2013-05-13  9:58     ` [PATCH v3 3/4] net: phy: realtek: add suspend/resume handlers for the RTL8211B Jongsung Kim
2013-05-13  9:58     ` [PATCH v3 4/4] net: phy: realtek: cleanup code Jongsung Kim

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=518A7284.4000504@cogentembedded.com \
    --to=sergei.shtylyov@cogentembedded.com \
    --cc=chohnstaedt@innominate.com \
    --cc=davem@davemloft.net \
    --cc=linux-kernel@vger.kernel.org \
    --cc=neidhard.kim@lge.com \
    --cc=netdev@vger.kernel.org \
    --cc=peppe.cavallaro@st.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.