From mboxrd@z Thu Jan 1 00:00:00 1970 From: Bruce Kettle Date: Fri, 24 May 2013 03:40:27 +0000 Subject: [lm-sensors] lm-sensors help question Message-Id: <519EE12B.4030108@gmail.com> List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="iso-8859-1" Content-Transfer-Encoding: quoted-printable To: lm-sensors@vger.kernel.org Hi I have a Biostar a780l3g motherboard with a Phenom II 840 processor. =20 I have Ubuntu 12.04 32-bit installed and current patches (kernel=20 3.5.0-30-generic). I installed lm-sensors and ran sensors-detect, it=20 properly detected the k10 sensors. But when I run sensors the output is=20 as follows: bruce@bruce-A780L3G:~$ sensors acpitz-virtual-0 Adapter: Virtual device temp1: +32.0=B0C (crit =3D +127.0=B0C) k10temp-pci-00c3 Adapter: PCI adapter temp1: +23.5=B0C (high =3D +70.0=B0C) (crit =3D +90.0=B0C, hyst =3D +88.0=B0C) I was hoping to be able to read core temps, but I don't think either of=20 these are that. It does not appear that Biostar provides Linux chipset drivers, although=20 your FAQ indicates this should be supported in this version of the=20 kernel. Is there something I am doing wrong or is the board just not=20 supported? The sensors did work in Windows 7 in a variety of programs,=20 so I don't think there is a hardware issue. Thanks _______________________________________________ lm-sensors mailing list lm-sensors@lm-sensors.org http://lists.lm-sensors.org/mailman/listinfo/lm-sensors