Am 31.07.2013 08:52, schrieb Oleksij Rempel:
> Am 28.07.2013 22:41, schrieb Christian Lamparter:
>> On Sunday, July 28, 2013 04:28:25 PM Oleksij Rempel wrote:
>>> Am 28.07.2013 14:12, schrieb Oleksij Rempel:
>>>> Am 28.07.2013 13:38, schrieb Christian Lamparter:
>>>>
>>>>>>     before  rmmod.
>>>>> Oh, I it was on the latest wireless-testing. (And the "ath9k_htc"
>>>>> module
>>>>> had the patch "ath9k_htc: reboot firmwware if it was loaded").
>>>>>
>>>>> Furthermore, I did the same test with one of the ehci-only ports
>>>>> and it worked. Both, devices (one had a AR7015, the other a AR9271)
>>>>> came back after autosuspend there.
>>>>
>>>> Grrr... so it brings us back to xhci issue. Even EP4 workaround wont
>>>> work here :( Suddenly i have no more ideas.
>>>>
>>>> Sarah, it's your turn now.
>>>
>>> Christian,
>>> can you please provide some more info about your xhci controller. I'll
>>> try to get me same.
>>
>> Well, it's a laptop (HP DV6-6003EG). I recon that getting 100% the
>> same setup will be difficult. However, since the uPD720200 was/is
>> very popular, it should be very easy to find one. [It's probably
>> on all of these "10 euro usb-3.0 pcie-adapters". So as long as you
>> got a free 1x-pcie port you should be good.]
>>
>> Here's the lspci summary:
>>
>> 19:00.0 USB controller [0c03]: NEC Corporation uPD720200 USB 3.0 Host
>> Controller [1033:0194] (rev 04) (prog-if 30 [XHCI])
>>          Subsystem: Hewlett-Packard Company Device [103c:1657]
>>          Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
>> ParErr- Stepping- SERR- FastB2B- DisINTx+
>>          Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast
>> >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
>>          Latency: 0, Cache Line Size: 64 bytes
>>          Interrupt: pin A routed to IRQ 19
>>          Region 0: Memory at d3400000 (64-bit, non-prefetchable)
>> [size=8K]
>>          Capabilities: <access denied>
>>          Kernel driver in use: xhci_hcd
>>
>
> Thx... i purchased on random on ebay, will see what i get.
>
> I know now why carl9170 don't triggering this bug. Carl uses EP4 as
> Interrupt with packet size 64. ath9k-htc initially have EP4=Intr,
> Interval=1, but will reconfigure it to Bulk, Interval=0.
> It mean, before usb suspend EP4=Bulk, Interval=0 and after resume
> EP4=Intr, Inter=?. May be xhci can't handle some thing like this? Or may
> be interval stay 0, and xhci will overfill usb buffer on adapter - at
> least it looks so.

Christian,
can you please test one more patch. It is working for me, but who knows. 
More testing is never bad idea ;)

-- 
Regards,
Oleksij