From: fabio tirapelle <ftirapelle@yahoo.it>
To: Bjorn Helgaas <bjorn.helgaas@hp.com>
Cc: linux-kernel@vger.kernel.org, Michael Krufky <mkrufky@kernellabs.com>
Subject: Hauppauge WinTV-HVR-1120 on Unbuntu 10.04
Date: Wed, 13 Oct 2010 22:26:02 +0100 (BST) [thread overview]
Message-ID: <525063.83798.qm@web25404.mail.ukl.yahoo.com> (raw)
[-- Attachment #1: Type: text/plain, Size: 10301 bytes --]
Yesterday I have installed (added not substituted) a new tuner: Hauppauge
Nova-T Stick 3
Today the WinTV-HVR-1120 doesn't works.
I attach my /var/log/messages
lsusb
Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 003 Device 002: ID 15c2:0036 SoundGraph Inc.
Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 002 Device 002: ID 2040:7070 Hauppauge Nova-T Stick 3
Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
lscpi
00:00.0 RAM memory: nVidia Corporation MCP78S [GeForce 8200] Memory Controller
(rev a2)
00:01.0 ISA bridge: nVidia Corporation MCP78S [GeForce 8200] LPC Bridge (rev
a2)
00:01.1 SMBus: nVidia Corporation MCP78S [GeForce 8200] SMBus (rev a1)
00:01.2 RAM memory: nVidia Corporation MCP78S [GeForce 8200] Memory Controller
(rev a1)
00:01.3 Co-processor: nVidia Corporation MCP78S [GeForce 8200] Co-Processor
(rev
a2)
00:01.4 RAM memory: nVidia Corporation MCP78S [GeForce 8200] Memory Controller
(rev a1)
00:02.0 USB Controller: nVidia Corporation MCP78S [GeForce 8200] OHCI USB 1.1
Controller (rev a1)
00:02.1 USB Controller: nVidia Corporation MCP78S [GeForce 8200] EHCI USB 2.0
Controller (rev a1)
00:04.0 USB Controller: nVidia Corporation MCP78S [GeForce 8200] OHCI USB 1.1
Controller (rev a1)
00:04.1 USB Controller: nVidia Corporation MCP78S [GeForce 8200] EHCI USB 2.0
Controller (rev a1)
00:06.0 IDE interface: nVidia Corporation MCP78S [GeForce 8200] IDE (rev a1)
00:07.0 Audio device: nVidia Corporation MCP72XE/MCP72P/MCP78U/MCP78S High
Definition Audio (rev a1)
00:08.0 PCI bridge: nVidia Corporation MCP78S [GeForce 8200] PCI Bridge (rev
a1)
00:09.0 IDE interface: nVidia Corporation MCP78S [GeForce 8200] SATA Controller
(non-AHCI mode) (rev a2)
00:0a.0 Ethernet controller: nVidia Corporation MCP77 Ethernet (rev a2)
00:0b.0 PCI bridge: nVidia Corporation MCP78S [GeForce 8200] PCI Express Bridge
(rev a1)
00:10.0 PCI bridge: nVidia Corporation MCP78S [GeForce 8200] PCI Express Bridge
(rev a1)
00:12.0 PCI bridge: nVidia Corporation MCP78S [GeForce 8200] PCI Express Bridge
(rev a1)
00:18.0 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron]
HyperTransport Technology Configuration
00:18.1 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Address
Map
00:18.2 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] DRAM
Controller
00:18.3 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron]
Miscellaneous Control
01:06.0 Multimedia controller: Philips Semiconductors SAA7131/SAA7133/SAA7135
Video Broadcast Decoder (rev d1)
01:07.0 Network controller: Techsan Electronics Co Ltd B2C2 FlexCopII DVB chip
/
Technisat SkyStar2 DVB card (rev 02)
02:00.0 VGA compatible controller: nVidia Corporation C77 [GeForce 8200] (rev
a2)
> ----- Messaggio originale -----
> > Da: Bjorn Helgaas <bjorn.helgaas@hp.com>
> > A: fabio tirapelle <ftirapelle@yahoo.it>
> > Cc: linux-kernel@vger.kernel.org; Michael Krufky <mkrufky@kernellabs.com>
> > Inviato: Mer 13 ottobre 2010, 21:54:31
> > Oggetto: Re: Hauppauge WinTV-HVR-1120 on Unbuntu 10.04
> >
> > On Wednesday, October 13, 2010 01:02:11 pm fabio tirapelle wrote:
> > > After upgrading from Ubuntu 9.10 to Ubuntu 10.04 my Hauppauge
>WinTV-HVR-1120
>
> >
> > > (sometimes) doesn't work correctly.
> > > I get random the following errors:
> > >
> > > tda18271_write_regs: ERROR: idx = 0x5, len = 1, i2c_transfer returned:
-5
> > > tda18271_init: error -5 on line 826
> > > tda18271_tune: error -5 on line 904
> > > tda18271_set_params: error -5 on line 985
> >
> > I cc'd Michael since he made several recent tda18271 changes.
> >
> > This page: http://cvs.linuxtv.org/wiki/index.php/Zolid_Hybrid_TV_Tuner
> > suggests that the card might work, despite the error messages. Does
> > yours work?
> >
> > I see that tda18271_write_regs() uses i2c_transfer(), which uses the
> > adap->algo->master_xfer function pointer, but I don't know enough to
> > figure out which master_xfer implementation might be used on your
> > system. A complete dmesg log and lspci output might have a hint.
> >
> > Can you reproduce this on an upstream kernel? It would be good to
> > make sure that it's not something introduced by an Ubuntu patch or
> > fixed since the Ubuntu kernel snapshot.
> >
> > Bjorn
> >
> > > Part of dmesg of 11-OCT-2010
> > >
> > > [ 53.216153] DVB: registering new adapter (saa7133[0])
> > > [ 53.216156] DVB: registering adapter 2 frontend 0 (NXP TDA10048HN
> >DVB-T)...
> > > [ 53.840013] tda10048_firmware_upload: waiting for firmware upload
> > > (dvb-fe-tda10048-1.0.fw)...
> > > [ 53.840019] saa7134 0000:01:06.0: firmware: requesting
> >dvb-fe-tda10048-1.0.fw
> > > [ 53.880505] tda10048_firmware_upload: firmware read 24878 bytes.
> > > [ 53.880509] tda10048_firmware_upload: firmware uploading
> > > [ 58.280136] tda10048_firmware_upload: firmware uploaded
> > > [ 59.024537] tda18271_write_regs: ERROR: idx = 0x5, len = 1,
>i2c_transfer
>
>
> > > returned: -5
> > > [ 59.024541] tda18271c2_rf_tracking_filters_correction: error -5 on
>line
>
> >264
> > > [ 59.420153] tda18271_write_regs: ERROR: idx = 0x5, len = 1,
>i2c_transfer
>
>
> > > returned: -5
> > > [ 59.420157] tda18271_toggle_output: error -5 on line 47
> > > [ 91.004019] Clocksource tsc unstable (delta = -295012684 ns)
> > > [ 256.293639] eth0: link up.
> > > [ 256.294750] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
> > > [ 263.523498] eth0: link down.
> > > [ 265.258740] eth0: link up.
> > > [ 266.460026] eth0: no IPv6 routers present
> > > [ 9869.636167] tda18271_write_regs: ERROR: idx = 0x5, len = 1,
>i2c_transfer
>
>
> > > returned: -5
> > > [ 9869.636178] tda18271_init: error -5 on line 826
> > > [ 9872.636220] tda18271_write_regs: ERROR: idx = 0x5, len = 1,
>i2c_transfer
>
>
> > > returned: -5
> > > [ 9872.636232] tda18271_toggle_output: error -5 on line 47
> > > [ 9998.240167] tda18271_write_regs: ERROR: idx = 0x5, len = 1,
>i2c_transfer
>
>
> > > returned: -5
> > > [ 9998.240178] tda18271_init: error -5 on line 826
> > > [10001.240179] tda18271_write_regs: ERROR: idx = 0x5, len = 1,
>i2c_transfer
>
>
> > > returned: -5
> > > [10001.240190] tda18271_toggle_output: error -5 on line 47
> > >
> > > And this is the dmesg of today: even the same errors.
> > >
> > > [ 741.252183] tda18271_init: error -5 on line 826
> > > [ 741.252188] tda18271_tune: error -5 on line 904
> > > [ 741.252193] tda18271_set_params: error -5 on line 985
> > > [ 742.268174] tda18271_write_regs: ERROR: idx = 0x5, len = 1,
>i2c_transfer
>
>
> > > returned: -5
> > > [ 742.268184] tda18271_init: error -5 on line 826
> > > [ 742.268189] tda18271_tune: error -5 on line 904
> > > [ 742.268194] tda18271_set_params: error -5 on line 985
> > > [ 743.284174] tda18271_write_regs: ERROR: idx = 0x5, len = 1,
>i2c_transfer
>
>
> > > returned: -5
> > > [ 743.284184] tda18271_init: error -5 on line 826
> > > [ 743.284190] tda18271_tune: error -5 on line 904
> > > [ 743.284194] tda18271_set_params: error -5 on line 985
> > > [ 744.300169] tda18271_write_regs: ERROR: idx = 0x5, len = 1,
>i2c_transfer
>
>
> > > returned: -5
> > > [ 744.300180] tda18271_init: error -5 on line 826
> > > [ 744.300185] tda18271_tune: error -5 on line 904
> > > [ 744.300190] tda18271_set_params: error -5 on line 985
> > > [ 745.320172] tda18271_write_regs: ERROR: idx = 0x5, len = 1,
>i2c_transfer
>
>
> > > returned: -5
> > > [ 745.320183] tda18271_init: error -5 on line 826
> > > [ 745.320188] tda18271_tune: error -5 on line 904
> > > [ 745.320193] tda18271_set_params: error -5 on line 985
> > > [ 746.336174] tda18271_write_regs: ERROR: idx = 0x5, len = 1,
>i2c_transfer
>
>
> > > returned: -5
> > > [ 746.336185] tda18271_init: error -5 on line 826
> > > [ 746.336190] tda18271_tune: error -5 on line 904
> > > [ 746.336195] tda18271_set_params: error -5 on line 985
> > > [ 747.352170] tda18271_write_regs: ERROR: idx = 0x5, len = 1,
>i2c_transfer
>
>
> > > returned: -5
> > > [ 747.352181] tda18271_init: error -5 on line 826
> > > [ 747.352187] tda18271_tune: error -5 on line 904
> > > [ 747.352192] tda18271_set_params: error -5 on line 985
> > > [ 748.368172] tda18271_write_regs: ERROR: idx = 0x5, len = 1,
>i2c_transfer
>
>
> > > returned: -5
> > > [ 748.368183] tda18271_init: error -5 on line 826
> > > [ 748.368188] tda18271_tune: error -5 on line 904
> > > [ 748.368193] tda18271_set_params: error -5 on line 985
> > > [ 749.384179] tda18271_write_regs: ERROR: idx = 0x5, len = 1,
>i2c_transfer
>
>
> > > returned: -5
> > > [ 749.384191] tda18271_init: error -5 on line 826
> > > [ 749.384196] tda18271_tune: error -5 on line 904
> > > [ 749.384202] tda18271_set_params: error -5 on line 985
> > > [ 750.400172] tda18271_write_regs: ERROR: idx = 0x5, len = 1,
>i2c_transfer
>
>
> > > returned: -5
> > > [ 750.400182] tda18271_init: error -5 on line 826
> > > [ 750.400188] tda18271_tune: error -5 on line 904
> > > [ 750.400194] tda18271_set_params: error -5 on line 985
> > > [ 751.424170] tda18271_write_regs: ERROR: idx = 0x5, len = 1,
>i2c_transfer
>
>
> > > returned: -5
> > > [ 751.424181] tda18271_init: error -5 on line 826
> > > [ 751.424186] tda18271_tune: error -5 on line 904
> > > [ 751.424192] tda18271_set_params: error -5 on line 985
> > > [ 752.440172] tda18271_write_regs: ERROR: idx = 0x5, len = 1,
>i2c_transfer
>
>
> > > returned: -5
> > >
>
>
> >
> >
> > >
> > >
> > > Any ideas?
> > > Thanks
> > >
> > >
> > >
> > >
> >
>
>
>
[-- Attachment #2: messages.zip --]
[-- Type: application/zip, Size: 27956 bytes --]
next reply other threads:[~2010-10-13 21:26 UTC|newest]
Thread overview: 13+ messages / expand[flat|nested] mbox.gz Atom feed top
2010-10-13 21:26 fabio tirapelle [this message]
-- strict thread matches above, loose matches on Subject: below --
2010-10-14 12:22 Hauppauge WinTV-HVR-1120 on Unbuntu 10.04 fabio tirapelle
2010-10-13 19:02 fabio tirapelle
2010-10-13 19:54 ` Bjorn Helgaas
2010-10-11 9:57 fabio tirapelle
2010-10-19 18:32 ` Albin Kauffmann
2010-10-19 19:56 ` fabio tirapelle
2010-10-24 14:27 ` Albin Kauffmann
2011-01-11 13:57 ` mmanzato
2011-01-15 17:37 ` Albin Kauffmann
2010-10-11 9:41 fabio tirapelle
2010-10-12 1:00 ` Zhang Rui
2010-10-12 20:27 ` Bjorn Helgaas
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=525063.83798.qm@web25404.mail.ukl.yahoo.com \
--to=ftirapelle@yahoo.it \
--cc=bjorn.helgaas@hp.com \
--cc=linux-kernel@vger.kernel.org \
--cc=mkrufky@kernellabs.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.