From mboxrd@z Thu Jan 1 00:00:00 1970 From: Sourav Poddar Date: Mon, 7 Oct 2013 20:47:19 +0530 Subject: [U-Boot] [UBOOT][PATCHv6 0/6] Add TI qspi controller with memory mapped support. In-Reply-To: References: <1381141384-32706-1-git-send-email-sourav.poddar@ti.com> Message-ID: <5252D07F.3070501@ti.com> List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: u-boot@lists.denx.de On Monday 07 October 2013 08:01 PM, Jagan Teki wrote: > On Mon, Oct 7, 2013 at 3:52 PM, Sourav Poddar wrote: >> This patch series add support for TI qspi controller and in the process also >> add support for quad read and memory mapped read >> in mtd spi framework. >> >> Testing details: >> Did a boot from qspi mode on DRA7xx. >> Testing details present in the last patch of >> the series. >> >> Currently, TI qpsi controller supports only 16MB access. >> Access for higher MB area will be added later. >> >> Patches are available at: >> git://gitorious.org/u-boot-shared/u-boot-qspi.git qspi_v7 >> >> Matt Porter (3): >> omap5: add qspi support >> spi: add TI QSPI driver >> dra7xx_evm: add SPL API, QSPI, and serial flash support >> >> Sourav Poddar (3): >> armv7: hw_data: change clock divider setting. >> sf: Add memory mapped read support >> README: qspi usecase and testing documentation. >> >> arch/arm/cpu/armv7/omap5/hw_data.c | 10 +- >> arch/arm/cpu/armv7/omap5/prcm-regs.c | 1 + >> arch/arm/include/asm/arch-omap5/omap.h | 3 + >> arch/arm/include/asm/arch-omap5/spl.h | 1 + >> arch/arm/include/asm/omap_common.h | 1 + >> board/ti/dra7xx/mux_data.h | 10 + >> doc/SPI/README.ti_qspi_dra_test | 48 +++++ >> doc/SPI/README.ti_qspi_flash | 47 +++++ >> drivers/mtd/spi/sf_ops.c | 2 + >> drivers/mtd/spi/sf_probe.c | 1 + >> drivers/spi/Makefile | 1 + >> drivers/spi/ti_qspi.c | 311 ++++++++++++++++++++++++++++++++ >> include/configs/dra7xx_evm.h | 19 ++ >> include/spi.h | 3 + >> 14 files changed, 457 insertions(+), 1 deletions(-) >> create mode 100644 doc/SPI/README.ti_qspi_dra_test >> create mode 100644 doc/SPI/README.ti_qspi_flash >> create mode 100644 drivers/spi/ti_qspi.c >> > Applied to u-boot-spi/master > Thanks!